1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2 /*
3 * hcd.c - DesignWare HS OTG Controller host-mode routines
4 *
5 * Copyright (C) 2004-2013 Synopsys, Inc.
6 */
7
8 /*
9 * This file contains the core HCD code, and implements the Linux hc_driver
10 * API
11 */
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/spinlock.h>
15 #include <linux/interrupt.h>
16 #include <linux/platform_device.h>
17 #include <linux/dma-mapping.h>
18 #include <linux/delay.h>
19 #include <linux/io.h>
20 #include <linux/slab.h>
21 #include <linux/usb.h>
22
23 #include <linux/usb/hcd.h>
24 #include <linux/usb/ch11.h>
25 #include <linux/usb/of.h>
26
27 #include "core.h"
28 #include "hcd.h"
29
30 /*
31 * =========================================================================
32 * Host Core Layer Functions
33 * =========================================================================
34 */
35
36 /**
37 * dwc2_enable_common_interrupts() - Initializes the commmon interrupts,
38 * used in both device and host modes
39 *
40 * @hsotg: Programming view of the DWC_otg controller
41 */
dwc2_enable_common_interrupts(struct dwc2_hsotg * hsotg)42 static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg)
43 {
44 u32 intmsk;
45
46 /* Clear any pending OTG Interrupts */
47 dwc2_writel(hsotg, 0xffffffff, GOTGINT);
48
49 /* Clear any pending interrupts */
50 dwc2_writel(hsotg, 0xffffffff, GINTSTS);
51
52 /* Enable the interrupts in the GINTMSK */
53 intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT;
54
55 if (!hsotg->params.host_dma)
56 intmsk |= GINTSTS_RXFLVL;
57 if (!hsotg->params.external_id_pin_ctl)
58 intmsk |= GINTSTS_CONIDSTSCHNG;
59
60 intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP |
61 GINTSTS_SESSREQINT;
62
63 if (dwc2_is_device_mode(hsotg) && hsotg->params.lpm)
64 intmsk |= GINTSTS_LPMTRANRCVD;
65
66 dwc2_writel(hsotg, intmsk, GINTMSK);
67 }
68
dwc2_gahbcfg_init(struct dwc2_hsotg * hsotg)69 static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg)
70 {
71 u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
72
73 switch (hsotg->hw_params.arch) {
74 case GHWCFG2_EXT_DMA_ARCH:
75 dev_err(hsotg->dev, "External DMA Mode not supported\n");
76 return -EINVAL;
77
78 case GHWCFG2_INT_DMA_ARCH:
79 dev_dbg(hsotg->dev, "Internal DMA Mode\n");
80 if (hsotg->params.ahbcfg != -1) {
81 ahbcfg &= GAHBCFG_CTRL_MASK;
82 ahbcfg |= hsotg->params.ahbcfg &
83 ~GAHBCFG_CTRL_MASK;
84 }
85 break;
86
87 case GHWCFG2_SLAVE_ONLY_ARCH:
88 default:
89 dev_dbg(hsotg->dev, "Slave Only Mode\n");
90 break;
91 }
92
93 if (hsotg->params.host_dma)
94 ahbcfg |= GAHBCFG_DMA_EN;
95 else
96 hsotg->params.dma_desc_enable = false;
97
98 dwc2_writel(hsotg, ahbcfg, GAHBCFG);
99
100 return 0;
101 }
102
dwc2_gusbcfg_init(struct dwc2_hsotg * hsotg)103 static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
104 {
105 u32 usbcfg;
106
107 usbcfg = dwc2_readl(hsotg, GUSBCFG);
108 usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP);
109
110 switch (hsotg->hw_params.op_mode) {
111 case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
112 if (hsotg->params.otg_caps.hnp_support &&
113 hsotg->params.otg_caps.srp_support)
114 usbcfg |= GUSBCFG_HNPCAP;
115 fallthrough;
116
117 case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
118 case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
119 case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
120 if (hsotg->params.otg_caps.srp_support)
121 usbcfg |= GUSBCFG_SRPCAP;
122 break;
123
124 case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE:
125 case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE:
126 case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST:
127 default:
128 break;
129 }
130
131 dwc2_writel(hsotg, usbcfg, GUSBCFG);
132 }
133
dwc2_vbus_supply_init(struct dwc2_hsotg * hsotg)134 static int dwc2_vbus_supply_init(struct dwc2_hsotg *hsotg)
135 {
136 if (hsotg->vbus_supply)
137 return regulator_enable(hsotg->vbus_supply);
138
139 return 0;
140 }
141
dwc2_vbus_supply_exit(struct dwc2_hsotg * hsotg)142 static int dwc2_vbus_supply_exit(struct dwc2_hsotg *hsotg)
143 {
144 if (hsotg->vbus_supply)
145 return regulator_disable(hsotg->vbus_supply);
146
147 return 0;
148 }
149
150 /**
151 * dwc2_enable_host_interrupts() - Enables the Host mode interrupts
152 *
153 * @hsotg: Programming view of DWC_otg controller
154 */
dwc2_enable_host_interrupts(struct dwc2_hsotg * hsotg)155 static void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg)
156 {
157 u32 intmsk;
158
159 dev_dbg(hsotg->dev, "%s()\n", __func__);
160
161 /* Disable all interrupts */
162 dwc2_writel(hsotg, 0, GINTMSK);
163 dwc2_writel(hsotg, 0, HAINTMSK);
164
165 /* Enable the common interrupts */
166 dwc2_enable_common_interrupts(hsotg);
167
168 /* Enable host mode interrupts without disturbing common interrupts */
169 intmsk = dwc2_readl(hsotg, GINTMSK);
170 intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT;
171 dwc2_writel(hsotg, intmsk, GINTMSK);
172 }
173
174 /**
175 * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts
176 *
177 * @hsotg: Programming view of DWC_otg controller
178 */
dwc2_disable_host_interrupts(struct dwc2_hsotg * hsotg)179 static void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg)
180 {
181 u32 intmsk = dwc2_readl(hsotg, GINTMSK);
182
183 /* Disable host mode interrupts without disturbing common interrupts */
184 intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT |
185 GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | GINTSTS_DISCONNINT);
186 dwc2_writel(hsotg, intmsk, GINTMSK);
187 }
188
189 /*
190 * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size
191 * For system that have a total fifo depth that is smaller than the default
192 * RX + TX fifo size.
193 *
194 * @hsotg: Programming view of DWC_otg controller
195 */
dwc2_calculate_dynamic_fifo(struct dwc2_hsotg * hsotg)196 static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg)
197 {
198 struct dwc2_core_params *params = &hsotg->params;
199 struct dwc2_hw_params *hw = &hsotg->hw_params;
200 u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size;
201
202 total_fifo_size = hw->total_fifo_size;
203 rxfsiz = params->host_rx_fifo_size;
204 nptxfsiz = params->host_nperio_tx_fifo_size;
205 ptxfsiz = params->host_perio_tx_fifo_size;
206
207 /*
208 * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth
209 * allocation with support for high bandwidth endpoints. Synopsys
210 * defines MPS(Max Packet size) for a periodic EP=1024, and for
211 * non-periodic as 512.
212 */
213 if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) {
214 /*
215 * For Buffer DMA mode/Scatter Gather DMA mode
216 * 2 * ((Largest Packet size / 4) + 1 + 1) + n
217 * with n = number of host channel.
218 * 2 * ((1024/4) + 2) = 516
219 */
220 rxfsiz = 516 + hw->host_channels;
221
222 /*
223 * min non-periodic tx fifo depth
224 * 2 * (largest non-periodic USB packet used / 4)
225 * 2 * (512/4) = 256
226 */
227 nptxfsiz = 256;
228
229 /*
230 * min periodic tx fifo depth
231 * (largest packet size*MC)/4
232 * (1024 * 3)/4 = 768
233 */
234 ptxfsiz = 768;
235
236 params->host_rx_fifo_size = rxfsiz;
237 params->host_nperio_tx_fifo_size = nptxfsiz;
238 params->host_perio_tx_fifo_size = ptxfsiz;
239 }
240
241 /*
242 * If the summation of RX, NPTX and PTX fifo sizes is still
243 * bigger than the total_fifo_size, then we have a problem.
244 *
245 * We won't be able to allocate as many endpoints. Right now,
246 * we're just printing an error message, but ideally this FIFO
247 * allocation algorithm would be improved in the future.
248 *
249 * FIXME improve this FIFO allocation algorithm.
250 */
251 if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)))
252 dev_err(hsotg->dev, "invalid fifo sizes\n");
253 }
254
dwc2_config_fifos(struct dwc2_hsotg * hsotg)255 static void dwc2_config_fifos(struct dwc2_hsotg *hsotg)
256 {
257 struct dwc2_core_params *params = &hsotg->params;
258 u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz;
259
260 if (!params->enable_dynamic_fifo)
261 return;
262
263 dwc2_calculate_dynamic_fifo(hsotg);
264
265 /* Rx FIFO */
266 grxfsiz = dwc2_readl(hsotg, GRXFSIZ);
267 dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz);
268 grxfsiz &= ~GRXFSIZ_DEPTH_MASK;
269 grxfsiz |= params->host_rx_fifo_size <<
270 GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK;
271 dwc2_writel(hsotg, grxfsiz, GRXFSIZ);
272 dev_dbg(hsotg->dev, "new grxfsiz=%08x\n",
273 dwc2_readl(hsotg, GRXFSIZ));
274
275 /* Non-periodic Tx FIFO */
276 dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n",
277 dwc2_readl(hsotg, GNPTXFSIZ));
278 nptxfsiz = params->host_nperio_tx_fifo_size <<
279 FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
280 nptxfsiz |= params->host_rx_fifo_size <<
281 FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
282 dwc2_writel(hsotg, nptxfsiz, GNPTXFSIZ);
283 dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n",
284 dwc2_readl(hsotg, GNPTXFSIZ));
285
286 /* Periodic Tx FIFO */
287 dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n",
288 dwc2_readl(hsotg, HPTXFSIZ));
289 hptxfsiz = params->host_perio_tx_fifo_size <<
290 FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK;
291 hptxfsiz |= (params->host_rx_fifo_size +
292 params->host_nperio_tx_fifo_size) <<
293 FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK;
294 dwc2_writel(hsotg, hptxfsiz, HPTXFSIZ);
295 dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n",
296 dwc2_readl(hsotg, HPTXFSIZ));
297
298 if (hsotg->params.en_multiple_tx_fifo &&
299 hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_91a) {
300 /*
301 * This feature was implemented in 2.91a version
302 * Global DFIFOCFG calculation for Host mode -
303 * include RxFIFO, NPTXFIFO and HPTXFIFO
304 */
305 dfifocfg = dwc2_readl(hsotg, GDFIFOCFG);
306 dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK;
307 dfifocfg |= (params->host_rx_fifo_size +
308 params->host_nperio_tx_fifo_size +
309 params->host_perio_tx_fifo_size) <<
310 GDFIFOCFG_EPINFOBASE_SHIFT &
311 GDFIFOCFG_EPINFOBASE_MASK;
312 dwc2_writel(hsotg, dfifocfg, GDFIFOCFG);
313 }
314 }
315
316 /**
317 * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for
318 * the HFIR register according to PHY type and speed
319 *
320 * @hsotg: Programming view of DWC_otg controller
321 *
322 * NOTE: The caller can modify the value of the HFIR register only after the
323 * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort)
324 * has been set
325 */
dwc2_calc_frame_interval(struct dwc2_hsotg * hsotg)326 u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg)
327 {
328 u32 usbcfg;
329 u32 hprt0;
330 int clock = 60; /* default value */
331
332 usbcfg = dwc2_readl(hsotg, GUSBCFG);
333 hprt0 = dwc2_readl(hsotg, HPRT0);
334
335 if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) &&
336 !(usbcfg & GUSBCFG_PHYIF16))
337 clock = 60;
338 if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type ==
339 GHWCFG2_FS_PHY_TYPE_SHARED_ULPI)
340 clock = 48;
341 if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
342 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
343 clock = 30;
344 if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
345 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16))
346 clock = 60;
347 if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) &&
348 !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16))
349 clock = 48;
350 if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) &&
351 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI)
352 clock = 48;
353 if ((usbcfg & GUSBCFG_PHYSEL) &&
354 hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED)
355 clock = 48;
356
357 if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED)
358 /* High speed case */
359 return 125 * clock - 1;
360
361 /* FS/LS case */
362 return 1000 * clock - 1;
363 }
364
365 /**
366 * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination
367 * buffer
368 *
369 * @hsotg: Programming view of DWC_otg controller
370 * @dest: Destination buffer for the packet
371 * @bytes: Number of bytes to copy to the destination
372 */
dwc2_read_packet(struct dwc2_hsotg * hsotg,u8 * dest,u16 bytes)373 void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes)
374 {
375 u32 *data_buf = (u32 *)dest;
376 int word_count = (bytes + 3) / 4;
377 int i;
378
379 /*
380 * Todo: Account for the case where dest is not dword aligned. This
381 * requires reading data from the FIFO into a u32 temp buffer, then
382 * moving it into the data buffer.
383 */
384
385 dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes);
386
387 for (i = 0; i < word_count; i++, data_buf++)
388 *data_buf = dwc2_readl(hsotg, HCFIFO(0));
389 }
390
391 /**
392 * dwc2_dump_channel_info() - Prints the state of a host channel
393 *
394 * @hsotg: Programming view of DWC_otg controller
395 * @chan: Pointer to the channel to dump
396 *
397 * Must be called with interrupt disabled and spinlock held
398 *
399 * NOTE: This function will be removed once the peripheral controller code
400 * is integrated and the driver is stable
401 */
dwc2_dump_channel_info(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan)402 static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg,
403 struct dwc2_host_chan *chan)
404 {
405 #ifdef VERBOSE_DEBUG
406 int num_channels = hsotg->params.host_channels;
407 struct dwc2_qh *qh;
408 u32 hcchar;
409 u32 hcsplt;
410 u32 hctsiz;
411 u32 hc_dma;
412 int i;
413
414 if (!chan)
415 return;
416
417 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
418 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num));
419 hctsiz = dwc2_readl(hsotg, HCTSIZ(chan->hc_num));
420 hc_dma = dwc2_readl(hsotg, HCDMA(chan->hc_num));
421
422 dev_dbg(hsotg->dev, " Assigned to channel %p:\n", chan);
423 dev_dbg(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n",
424 hcchar, hcsplt);
425 dev_dbg(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n",
426 hctsiz, hc_dma);
427 dev_dbg(hsotg->dev, " dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
428 chan->dev_addr, chan->ep_num, chan->ep_is_in);
429 dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type);
430 dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet);
431 dev_dbg(hsotg->dev, " data_pid_start: %d\n", chan->data_pid_start);
432 dev_dbg(hsotg->dev, " xfer_started: %d\n", chan->xfer_started);
433 dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status);
434 dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf);
435 dev_dbg(hsotg->dev, " xfer_dma: %08lx\n",
436 (unsigned long)chan->xfer_dma);
437 dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len);
438 dev_dbg(hsotg->dev, " qh: %p\n", chan->qh);
439 dev_dbg(hsotg->dev, " NP inactive sched:\n");
440 list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive,
441 qh_list_entry)
442 dev_dbg(hsotg->dev, " %p\n", qh);
443 dev_dbg(hsotg->dev, " NP waiting sched:\n");
444 list_for_each_entry(qh, &hsotg->non_periodic_sched_waiting,
445 qh_list_entry)
446 dev_dbg(hsotg->dev, " %p\n", qh);
447 dev_dbg(hsotg->dev, " NP active sched:\n");
448 list_for_each_entry(qh, &hsotg->non_periodic_sched_active,
449 qh_list_entry)
450 dev_dbg(hsotg->dev, " %p\n", qh);
451 dev_dbg(hsotg->dev, " Channels:\n");
452 for (i = 0; i < num_channels; i++) {
453 struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i];
454
455 dev_dbg(hsotg->dev, " %2d: %p\n", i, chan);
456 }
457 #endif /* VERBOSE_DEBUG */
458 }
459
460 static int _dwc2_hcd_start(struct usb_hcd *hcd);
461
dwc2_host_start(struct dwc2_hsotg * hsotg)462 static void dwc2_host_start(struct dwc2_hsotg *hsotg)
463 {
464 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
465
466 hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg);
467 _dwc2_hcd_start(hcd);
468 }
469
dwc2_host_disconnect(struct dwc2_hsotg * hsotg)470 static void dwc2_host_disconnect(struct dwc2_hsotg *hsotg)
471 {
472 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
473
474 hcd->self.is_b_host = 0;
475 }
476
dwc2_host_hub_info(struct dwc2_hsotg * hsotg,void * context,int * hub_addr,int * hub_port)477 static void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context,
478 int *hub_addr, int *hub_port)
479 {
480 struct urb *urb = context;
481
482 if (urb->dev->tt)
483 *hub_addr = urb->dev->tt->hub->devnum;
484 else
485 *hub_addr = 0;
486 *hub_port = urb->dev->ttport;
487 }
488
489 /*
490 * =========================================================================
491 * Low Level Host Channel Access Functions
492 * =========================================================================
493 */
494
dwc2_hc_enable_slave_ints(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan)495 static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg,
496 struct dwc2_host_chan *chan)
497 {
498 u32 hcintmsk = HCINTMSK_CHHLTD;
499
500 switch (chan->ep_type) {
501 case USB_ENDPOINT_XFER_CONTROL:
502 case USB_ENDPOINT_XFER_BULK:
503 dev_vdbg(hsotg->dev, "control/bulk\n");
504 hcintmsk |= HCINTMSK_XFERCOMPL;
505 hcintmsk |= HCINTMSK_STALL;
506 hcintmsk |= HCINTMSK_XACTERR;
507 hcintmsk |= HCINTMSK_DATATGLERR;
508 if (chan->ep_is_in) {
509 hcintmsk |= HCINTMSK_BBLERR;
510 } else {
511 hcintmsk |= HCINTMSK_NAK;
512 hcintmsk |= HCINTMSK_NYET;
513 if (chan->do_ping)
514 hcintmsk |= HCINTMSK_ACK;
515 }
516
517 if (chan->do_split) {
518 hcintmsk |= HCINTMSK_NAK;
519 if (chan->complete_split)
520 hcintmsk |= HCINTMSK_NYET;
521 else
522 hcintmsk |= HCINTMSK_ACK;
523 }
524
525 if (chan->error_state)
526 hcintmsk |= HCINTMSK_ACK;
527 break;
528
529 case USB_ENDPOINT_XFER_INT:
530 if (dbg_perio())
531 dev_vdbg(hsotg->dev, "intr\n");
532 hcintmsk |= HCINTMSK_XFERCOMPL;
533 hcintmsk |= HCINTMSK_NAK;
534 hcintmsk |= HCINTMSK_STALL;
535 hcintmsk |= HCINTMSK_XACTERR;
536 hcintmsk |= HCINTMSK_DATATGLERR;
537 hcintmsk |= HCINTMSK_FRMOVRUN;
538
539 if (chan->ep_is_in)
540 hcintmsk |= HCINTMSK_BBLERR;
541 if (chan->error_state)
542 hcintmsk |= HCINTMSK_ACK;
543 if (chan->do_split) {
544 if (chan->complete_split)
545 hcintmsk |= HCINTMSK_NYET;
546 else
547 hcintmsk |= HCINTMSK_ACK;
548 }
549 break;
550
551 case USB_ENDPOINT_XFER_ISOC:
552 if (dbg_perio())
553 dev_vdbg(hsotg->dev, "isoc\n");
554 hcintmsk |= HCINTMSK_XFERCOMPL;
555 hcintmsk |= HCINTMSK_FRMOVRUN;
556 hcintmsk |= HCINTMSK_ACK;
557
558 if (chan->ep_is_in) {
559 hcintmsk |= HCINTMSK_XACTERR;
560 hcintmsk |= HCINTMSK_BBLERR;
561 }
562 break;
563 default:
564 dev_err(hsotg->dev, "## Unknown EP type ##\n");
565 break;
566 }
567
568 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num));
569 if (dbg_hc(chan))
570 dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
571 }
572
dwc2_hc_enable_dma_ints(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan)573 static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg,
574 struct dwc2_host_chan *chan)
575 {
576 u32 hcintmsk = HCINTMSK_CHHLTD;
577
578 /*
579 * For Descriptor DMA mode core halts the channel on AHB error.
580 * Interrupt is not required.
581 */
582 if (!hsotg->params.dma_desc_enable) {
583 if (dbg_hc(chan))
584 dev_vdbg(hsotg->dev, "desc DMA disabled\n");
585 hcintmsk |= HCINTMSK_AHBERR;
586 } else {
587 if (dbg_hc(chan))
588 dev_vdbg(hsotg->dev, "desc DMA enabled\n");
589 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
590 hcintmsk |= HCINTMSK_XFERCOMPL;
591 }
592
593 if (chan->error_state && !chan->do_split &&
594 chan->ep_type != USB_ENDPOINT_XFER_ISOC) {
595 if (dbg_hc(chan))
596 dev_vdbg(hsotg->dev, "setting ACK\n");
597 hcintmsk |= HCINTMSK_ACK;
598 if (chan->ep_is_in) {
599 hcintmsk |= HCINTMSK_DATATGLERR;
600 if (chan->ep_type != USB_ENDPOINT_XFER_INT)
601 hcintmsk |= HCINTMSK_NAK;
602 }
603 }
604
605 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num));
606 if (dbg_hc(chan))
607 dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk);
608 }
609
dwc2_hc_enable_ints(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan)610 static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg,
611 struct dwc2_host_chan *chan)
612 {
613 u32 intmsk;
614
615 if (hsotg->params.host_dma) {
616 if (dbg_hc(chan))
617 dev_vdbg(hsotg->dev, "DMA enabled\n");
618 dwc2_hc_enable_dma_ints(hsotg, chan);
619 } else {
620 if (dbg_hc(chan))
621 dev_vdbg(hsotg->dev, "DMA disabled\n");
622 dwc2_hc_enable_slave_ints(hsotg, chan);
623 }
624
625 /* Enable the top level host channel interrupt */
626 intmsk = dwc2_readl(hsotg, HAINTMSK);
627 intmsk |= 1 << chan->hc_num;
628 dwc2_writel(hsotg, intmsk, HAINTMSK);
629 if (dbg_hc(chan))
630 dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk);
631
632 /* Make sure host channel interrupts are enabled */
633 intmsk = dwc2_readl(hsotg, GINTMSK);
634 intmsk |= GINTSTS_HCHINT;
635 dwc2_writel(hsotg, intmsk, GINTMSK);
636 if (dbg_hc(chan))
637 dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk);
638 }
639
640 /**
641 * dwc2_hc_init() - Prepares a host channel for transferring packets to/from
642 * a specific endpoint
643 *
644 * @hsotg: Programming view of DWC_otg controller
645 * @chan: Information needed to initialize the host channel
646 *
647 * The HCCHARn register is set up with the characteristics specified in chan.
648 * Host channel interrupts that may need to be serviced while this transfer is
649 * in progress are enabled.
650 */
dwc2_hc_init(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan)651 static void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
652 {
653 u8 hc_num = chan->hc_num;
654 u32 hcintmsk;
655 u32 hcchar;
656 u32 hcsplt = 0;
657
658 if (dbg_hc(chan))
659 dev_vdbg(hsotg->dev, "%s()\n", __func__);
660
661 /* Clear old interrupt conditions for this host channel */
662 hcintmsk = 0xffffffff;
663 hcintmsk &= ~HCINTMSK_RESERVED14_31;
664 dwc2_writel(hsotg, hcintmsk, HCINT(hc_num));
665
666 /* Enable channel interrupts required for this transfer */
667 dwc2_hc_enable_ints(hsotg, chan);
668
669 /*
670 * Program the HCCHARn register with the endpoint characteristics for
671 * the current transfer
672 */
673 hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK;
674 hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK;
675 if (chan->ep_is_in)
676 hcchar |= HCCHAR_EPDIR;
677 if (chan->speed == USB_SPEED_LOW)
678 hcchar |= HCCHAR_LSPDDEV;
679 hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK;
680 hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK;
681 dwc2_writel(hsotg, hcchar, HCCHAR(hc_num));
682 if (dbg_hc(chan)) {
683 dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n",
684 hc_num, hcchar);
685
686 dev_vdbg(hsotg->dev, "%s: Channel %d\n",
687 __func__, hc_num);
688 dev_vdbg(hsotg->dev, " Dev Addr: %d\n",
689 chan->dev_addr);
690 dev_vdbg(hsotg->dev, " Ep Num: %d\n",
691 chan->ep_num);
692 dev_vdbg(hsotg->dev, " Is In: %d\n",
693 chan->ep_is_in);
694 dev_vdbg(hsotg->dev, " Is Low Speed: %d\n",
695 chan->speed == USB_SPEED_LOW);
696 dev_vdbg(hsotg->dev, " Ep Type: %d\n",
697 chan->ep_type);
698 dev_vdbg(hsotg->dev, " Max Pkt: %d\n",
699 chan->max_packet);
700 }
701
702 /* Program the HCSPLT register for SPLITs */
703 if (chan->do_split) {
704 if (dbg_hc(chan))
705 dev_vdbg(hsotg->dev,
706 "Programming HC %d with split --> %s\n",
707 hc_num,
708 chan->complete_split ? "CSPLIT" : "SSPLIT");
709 if (chan->complete_split)
710 hcsplt |= HCSPLT_COMPSPLT;
711 hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT &
712 HCSPLT_XACTPOS_MASK;
713 hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT &
714 HCSPLT_HUBADDR_MASK;
715 hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT &
716 HCSPLT_PRTADDR_MASK;
717 if (dbg_hc(chan)) {
718 dev_vdbg(hsotg->dev, " comp split %d\n",
719 chan->complete_split);
720 dev_vdbg(hsotg->dev, " xact pos %d\n",
721 chan->xact_pos);
722 dev_vdbg(hsotg->dev, " hub addr %d\n",
723 chan->hub_addr);
724 dev_vdbg(hsotg->dev, " hub port %d\n",
725 chan->hub_port);
726 dev_vdbg(hsotg->dev, " is_in %d\n",
727 chan->ep_is_in);
728 dev_vdbg(hsotg->dev, " Max Pkt %d\n",
729 chan->max_packet);
730 dev_vdbg(hsotg->dev, " xferlen %d\n",
731 chan->xfer_len);
732 }
733 }
734
735 dwc2_writel(hsotg, hcsplt, HCSPLT(hc_num));
736 }
737
738 /**
739 * dwc2_hc_halt() - Attempts to halt a host channel
740 *
741 * @hsotg: Controller register interface
742 * @chan: Host channel to halt
743 * @halt_status: Reason for halting the channel
744 *
745 * This function should only be called in Slave mode or to abort a transfer in
746 * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the
747 * controller halts the channel when the transfer is complete or a condition
748 * occurs that requires application intervention.
749 *
750 * In slave mode, checks for a free request queue entry, then sets the Channel
751 * Enable and Channel Disable bits of the Host Channel Characteristics
752 * register of the specified channel to intiate the halt. If there is no free
753 * request queue entry, sets only the Channel Disable bit of the HCCHARn
754 * register to flush requests for this channel. In the latter case, sets a
755 * flag to indicate that the host channel needs to be halted when a request
756 * queue slot is open.
757 *
758 * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
759 * HCCHARn register. The controller ensures there is space in the request
760 * queue before submitting the halt request.
761 *
762 * Some time may elapse before the core flushes any posted requests for this
763 * host channel and halts. The Channel Halted interrupt handler completes the
764 * deactivation of the host channel.
765 */
dwc2_hc_halt(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan,enum dwc2_halt_status halt_status)766 void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
767 enum dwc2_halt_status halt_status)
768 {
769 u32 nptxsts, hptxsts, hcchar;
770
771 if (dbg_hc(chan))
772 dev_vdbg(hsotg->dev, "%s()\n", __func__);
773
774 /*
775 * In buffer DMA or external DMA mode channel can't be halted
776 * for non-split periodic channels. At the end of the next
777 * uframe/frame (in the worst case), the core generates a channel
778 * halted and disables the channel automatically.
779 */
780 if ((hsotg->params.g_dma && !hsotg->params.g_dma_desc) ||
781 hsotg->hw_params.arch == GHWCFG2_EXT_DMA_ARCH) {
782 if (!chan->do_split &&
783 (chan->ep_type == USB_ENDPOINT_XFER_ISOC ||
784 chan->ep_type == USB_ENDPOINT_XFER_INT)) {
785 dev_err(hsotg->dev, "%s() Channel can't be halted\n",
786 __func__);
787 return;
788 }
789 }
790
791 if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS)
792 dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status);
793
794 if (halt_status == DWC2_HC_XFER_URB_DEQUEUE ||
795 halt_status == DWC2_HC_XFER_AHB_ERR) {
796 /*
797 * Disable all channel interrupts except Ch Halted. The QTD
798 * and QH state associated with this transfer has been cleared
799 * (in the case of URB_DEQUEUE), so the channel needs to be
800 * shut down carefully to prevent crashes.
801 */
802 u32 hcintmsk = HCINTMSK_CHHLTD;
803
804 dev_vdbg(hsotg->dev, "dequeue/error\n");
805 dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num));
806
807 /*
808 * Make sure no other interrupts besides halt are currently
809 * pending. Handling another interrupt could cause a crash due
810 * to the QTD and QH state.
811 */
812 dwc2_writel(hsotg, ~hcintmsk, HCINT(chan->hc_num));
813
814 /*
815 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
816 * even if the channel was already halted for some other
817 * reason
818 */
819 chan->halt_status = halt_status;
820
821 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
822 if (!(hcchar & HCCHAR_CHENA)) {
823 /*
824 * The channel is either already halted or it hasn't
825 * started yet. In DMA mode, the transfer may halt if
826 * it finishes normally or a condition occurs that
827 * requires driver intervention. Don't want to halt
828 * the channel again. In either Slave or DMA mode,
829 * it's possible that the transfer has been assigned
830 * to a channel, but not started yet when an URB is
831 * dequeued. Don't want to halt a channel that hasn't
832 * started yet.
833 */
834 return;
835 }
836 }
837 if (chan->halt_pending) {
838 /*
839 * A halt has already been issued for this channel. This might
840 * happen when a transfer is aborted by a higher level in
841 * the stack.
842 */
843 dev_vdbg(hsotg->dev,
844 "*** %s: Channel %d, chan->halt_pending already set ***\n",
845 __func__, chan->hc_num);
846 return;
847 }
848
849 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
850
851 /* No need to set the bit in DDMA for disabling the channel */
852 /* TODO check it everywhere channel is disabled */
853 if (!hsotg->params.dma_desc_enable) {
854 if (dbg_hc(chan))
855 dev_vdbg(hsotg->dev, "desc DMA disabled\n");
856 hcchar |= HCCHAR_CHENA;
857 } else {
858 if (dbg_hc(chan))
859 dev_dbg(hsotg->dev, "desc DMA enabled\n");
860 }
861 hcchar |= HCCHAR_CHDIS;
862
863 if (!hsotg->params.host_dma) {
864 if (dbg_hc(chan))
865 dev_vdbg(hsotg->dev, "DMA not enabled\n");
866 hcchar |= HCCHAR_CHENA;
867
868 /* Check for space in the request queue to issue the halt */
869 if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL ||
870 chan->ep_type == USB_ENDPOINT_XFER_BULK) {
871 dev_vdbg(hsotg->dev, "control/bulk\n");
872 nptxsts = dwc2_readl(hsotg, GNPTXSTS);
873 if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) {
874 dev_vdbg(hsotg->dev, "Disabling channel\n");
875 hcchar &= ~HCCHAR_CHENA;
876 }
877 } else {
878 if (dbg_perio())
879 dev_vdbg(hsotg->dev, "isoc/intr\n");
880 hptxsts = dwc2_readl(hsotg, HPTXSTS);
881 if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 ||
882 hsotg->queuing_high_bandwidth) {
883 if (dbg_perio())
884 dev_vdbg(hsotg->dev, "Disabling channel\n");
885 hcchar &= ~HCCHAR_CHENA;
886 }
887 }
888 } else {
889 if (dbg_hc(chan))
890 dev_vdbg(hsotg->dev, "DMA enabled\n");
891 }
892
893 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
894 chan->halt_status = halt_status;
895
896 if (hcchar & HCCHAR_CHENA) {
897 if (dbg_hc(chan))
898 dev_vdbg(hsotg->dev, "Channel enabled\n");
899 chan->halt_pending = 1;
900 chan->halt_on_queue = 0;
901 } else {
902 if (dbg_hc(chan))
903 dev_vdbg(hsotg->dev, "Channel disabled\n");
904 chan->halt_on_queue = 1;
905 }
906
907 if (dbg_hc(chan)) {
908 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
909 chan->hc_num);
910 dev_vdbg(hsotg->dev, " hcchar: 0x%08x\n",
911 hcchar);
912 dev_vdbg(hsotg->dev, " halt_pending: %d\n",
913 chan->halt_pending);
914 dev_vdbg(hsotg->dev, " halt_on_queue: %d\n",
915 chan->halt_on_queue);
916 dev_vdbg(hsotg->dev, " halt_status: %d\n",
917 chan->halt_status);
918 }
919 }
920
921 /**
922 * dwc2_hc_cleanup() - Clears the transfer state for a host channel
923 *
924 * @hsotg: Programming view of DWC_otg controller
925 * @chan: Identifies the host channel to clean up
926 *
927 * This function is normally called after a transfer is done and the host
928 * channel is being released
929 */
dwc2_hc_cleanup(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan)930 void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
931 {
932 u32 hcintmsk;
933
934 chan->xfer_started = 0;
935
936 list_del_init(&chan->split_order_list_entry);
937
938 /*
939 * Clear channel interrupt enables and any unhandled channel interrupt
940 * conditions
941 */
942 dwc2_writel(hsotg, 0, HCINTMSK(chan->hc_num));
943 hcintmsk = 0xffffffff;
944 hcintmsk &= ~HCINTMSK_RESERVED14_31;
945 dwc2_writel(hsotg, hcintmsk, HCINT(chan->hc_num));
946 }
947
948 /**
949 * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in
950 * which frame a periodic transfer should occur
951 *
952 * @hsotg: Programming view of DWC_otg controller
953 * @chan: Identifies the host channel to set up and its properties
954 * @hcchar: Current value of the HCCHAR register for the specified host channel
955 *
956 * This function has no effect on non-periodic transfers
957 */
dwc2_hc_set_even_odd_frame(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan,u32 * hcchar)958 static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg,
959 struct dwc2_host_chan *chan, u32 *hcchar)
960 {
961 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
962 chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
963 int host_speed;
964 int xfer_ns;
965 int xfer_us;
966 int bytes_in_fifo;
967 u16 fifo_space;
968 u16 frame_number;
969 u16 wire_frame;
970
971 /*
972 * Try to figure out if we're an even or odd frame. If we set
973 * even and the current frame number is even the transfer
974 * will happen immediately. Similar if both are odd. If one is
975 * even and the other is odd then the transfer will happen when
976 * the frame number ticks.
977 *
978 * There's a bit of a balancing act to get this right.
979 * Sometimes we may want to send data in the current frame (AK
980 * right away). We might want to do this if the frame number
981 * _just_ ticked, but we might also want to do this in order
982 * to continue a split transaction that happened late in a
983 * microframe (so we didn't know to queue the next transfer
984 * until the frame number had ticked). The problem is that we
985 * need a lot of knowledge to know if there's actually still
986 * time to send things or if it would be better to wait until
987 * the next frame.
988 *
989 * We can look at how much time is left in the current frame
990 * and make a guess about whether we'll have time to transfer.
991 * We'll do that.
992 */
993
994 /* Get speed host is running at */
995 host_speed = (chan->speed != USB_SPEED_HIGH &&
996 !chan->do_split) ? chan->speed : USB_SPEED_HIGH;
997
998 /* See how many bytes are in the periodic FIFO right now */
999 fifo_space = (dwc2_readl(hsotg, HPTXSTS) &
1000 TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT;
1001 bytes_in_fifo = sizeof(u32) *
1002 (hsotg->params.host_perio_tx_fifo_size -
1003 fifo_space);
1004
1005 /*
1006 * Roughly estimate bus time for everything in the periodic
1007 * queue + our new transfer. This is "rough" because we're
1008 * using a function that makes takes into account IN/OUT
1009 * and INT/ISO and we're just slamming in one value for all
1010 * transfers. This should be an over-estimate and that should
1011 * be OK, but we can probably tighten it.
1012 */
1013 xfer_ns = usb_calc_bus_time(host_speed, false, false,
1014 chan->xfer_len + bytes_in_fifo);
1015 xfer_us = NS_TO_US(xfer_ns);
1016
1017 /* See what frame number we'll be at by the time we finish */
1018 frame_number = dwc2_hcd_get_future_frame_number(hsotg, xfer_us);
1019
1020 /* This is when we were scheduled to be on the wire */
1021 wire_frame = dwc2_frame_num_inc(chan->qh->next_active_frame, 1);
1022
1023 /*
1024 * If we'd finish _after_ the frame we're scheduled in then
1025 * it's hopeless. Just schedule right away and hope for the
1026 * best. Note that it _might_ be wise to call back into the
1027 * scheduler to pick a better frame, but this is better than
1028 * nothing.
1029 */
1030 if (dwc2_frame_num_gt(frame_number, wire_frame)) {
1031 dwc2_sch_vdbg(hsotg,
1032 "QH=%p EO MISS fr=%04x=>%04x (%+d)\n",
1033 chan->qh, wire_frame, frame_number,
1034 dwc2_frame_num_dec(frame_number,
1035 wire_frame));
1036 wire_frame = frame_number;
1037
1038 /*
1039 * We picked a different frame number; communicate this
1040 * back to the scheduler so it doesn't try to schedule
1041 * another in the same frame.
1042 *
1043 * Remember that next_active_frame is 1 before the wire
1044 * frame.
1045 */
1046 chan->qh->next_active_frame =
1047 dwc2_frame_num_dec(frame_number, 1);
1048 }
1049
1050 if (wire_frame & 1)
1051 *hcchar |= HCCHAR_ODDFRM;
1052 else
1053 *hcchar &= ~HCCHAR_ODDFRM;
1054 }
1055 }
1056
dwc2_set_pid_isoc(struct dwc2_host_chan * chan)1057 static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan)
1058 {
1059 /* Set up the initial PID for the transfer */
1060 if (chan->speed == USB_SPEED_HIGH) {
1061 if (chan->ep_is_in) {
1062 if (chan->multi_count == 1)
1063 chan->data_pid_start = DWC2_HC_PID_DATA0;
1064 else if (chan->multi_count == 2)
1065 chan->data_pid_start = DWC2_HC_PID_DATA1;
1066 else
1067 chan->data_pid_start = DWC2_HC_PID_DATA2;
1068 } else {
1069 if (chan->multi_count == 1)
1070 chan->data_pid_start = DWC2_HC_PID_DATA0;
1071 else
1072 chan->data_pid_start = DWC2_HC_PID_MDATA;
1073 }
1074 } else {
1075 chan->data_pid_start = DWC2_HC_PID_DATA0;
1076 }
1077 }
1078
1079 /**
1080 * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with
1081 * the Host Channel
1082 *
1083 * @hsotg: Programming view of DWC_otg controller
1084 * @chan: Information needed to initialize the host channel
1085 *
1086 * This function should only be called in Slave mode. For a channel associated
1087 * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel
1088 * associated with a periodic EP, the periodic Tx FIFO is written.
1089 *
1090 * Upon return the xfer_buf and xfer_count fields in chan are incremented by
1091 * the number of bytes written to the Tx FIFO.
1092 */
dwc2_hc_write_packet(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan)1093 static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg,
1094 struct dwc2_host_chan *chan)
1095 {
1096 u32 i;
1097 u32 remaining_count;
1098 u32 byte_count;
1099 u32 dword_count;
1100 u32 *data_buf = (u32 *)chan->xfer_buf;
1101
1102 if (dbg_hc(chan))
1103 dev_vdbg(hsotg->dev, "%s()\n", __func__);
1104
1105 remaining_count = chan->xfer_len - chan->xfer_count;
1106 if (remaining_count > chan->max_packet)
1107 byte_count = chan->max_packet;
1108 else
1109 byte_count = remaining_count;
1110
1111 dword_count = (byte_count + 3) / 4;
1112
1113 if (((unsigned long)data_buf & 0x3) == 0) {
1114 /* xfer_buf is DWORD aligned */
1115 for (i = 0; i < dword_count; i++, data_buf++)
1116 dwc2_writel(hsotg, *data_buf, HCFIFO(chan->hc_num));
1117 } else {
1118 /* xfer_buf is not DWORD aligned */
1119 for (i = 0; i < dword_count; i++, data_buf++) {
1120 u32 data = data_buf[0] | data_buf[1] << 8 |
1121 data_buf[2] << 16 | data_buf[3] << 24;
1122 dwc2_writel(hsotg, data, HCFIFO(chan->hc_num));
1123 }
1124 }
1125
1126 chan->xfer_count += byte_count;
1127 chan->xfer_buf += byte_count;
1128 }
1129
1130 /**
1131 * dwc2_hc_do_ping() - Starts a PING transfer
1132 *
1133 * @hsotg: Programming view of DWC_otg controller
1134 * @chan: Information needed to initialize the host channel
1135 *
1136 * This function should only be called in Slave mode. The Do Ping bit is set in
1137 * the HCTSIZ register, then the channel is enabled.
1138 */
dwc2_hc_do_ping(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan)1139 static void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg,
1140 struct dwc2_host_chan *chan)
1141 {
1142 u32 hcchar;
1143 u32 hctsiz;
1144
1145 if (dbg_hc(chan))
1146 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
1147 chan->hc_num);
1148
1149 hctsiz = TSIZ_DOPNG;
1150 hctsiz |= 1 << TSIZ_PKTCNT_SHIFT;
1151 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num));
1152
1153 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
1154 hcchar |= HCCHAR_CHENA;
1155 hcchar &= ~HCCHAR_CHDIS;
1156 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
1157 }
1158
1159 /**
1160 * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host
1161 * channel and starts the transfer
1162 *
1163 * @hsotg: Programming view of DWC_otg controller
1164 * @chan: Information needed to initialize the host channel. The xfer_len value
1165 * may be reduced to accommodate the max widths of the XferSize and
1166 * PktCnt fields in the HCTSIZn register. The multi_count value may be
1167 * changed to reflect the final xfer_len value.
1168 *
1169 * This function may be called in either Slave mode or DMA mode. In Slave mode,
1170 * the caller must ensure that there is sufficient space in the request queue
1171 * and Tx Data FIFO.
1172 *
1173 * For an OUT transfer in Slave mode, it loads a data packet into the
1174 * appropriate FIFO. If necessary, additional data packets are loaded in the
1175 * Host ISR.
1176 *
1177 * For an IN transfer in Slave mode, a data packet is requested. The data
1178 * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
1179 * additional data packets are requested in the Host ISR.
1180 *
1181 * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
1182 * register along with a packet count of 1 and the channel is enabled. This
1183 * causes a single PING transaction to occur. Other fields in HCTSIZ are
1184 * simply set to 0 since no data transfer occurs in this case.
1185 *
1186 * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
1187 * all the information required to perform the subsequent data transfer. In
1188 * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
1189 * controller performs the entire PING protocol, then starts the data
1190 * transfer.
1191 */
dwc2_hc_start_transfer(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan)1192 static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
1193 struct dwc2_host_chan *chan)
1194 {
1195 u32 max_hc_xfer_size = hsotg->params.max_transfer_size;
1196 u16 max_hc_pkt_count = hsotg->params.max_packet_count;
1197 u32 hcchar;
1198 u32 hctsiz = 0;
1199 u16 num_packets;
1200 u32 ec_mc;
1201
1202 if (dbg_hc(chan))
1203 dev_vdbg(hsotg->dev, "%s()\n", __func__);
1204
1205 if (chan->do_ping) {
1206 if (!hsotg->params.host_dma) {
1207 if (dbg_hc(chan))
1208 dev_vdbg(hsotg->dev, "ping, no DMA\n");
1209 dwc2_hc_do_ping(hsotg, chan);
1210 chan->xfer_started = 1;
1211 return;
1212 }
1213
1214 if (dbg_hc(chan))
1215 dev_vdbg(hsotg->dev, "ping, DMA\n");
1216
1217 hctsiz |= TSIZ_DOPNG;
1218 }
1219
1220 if (chan->do_split) {
1221 if (dbg_hc(chan))
1222 dev_vdbg(hsotg->dev, "split\n");
1223 num_packets = 1;
1224
1225 if (chan->complete_split && !chan->ep_is_in)
1226 /*
1227 * For CSPLIT OUT Transfer, set the size to 0 so the
1228 * core doesn't expect any data written to the FIFO
1229 */
1230 chan->xfer_len = 0;
1231 else if (chan->ep_is_in || chan->xfer_len > chan->max_packet)
1232 chan->xfer_len = chan->max_packet;
1233 else if (!chan->ep_is_in && chan->xfer_len > 188)
1234 chan->xfer_len = 188;
1235
1236 hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
1237 TSIZ_XFERSIZE_MASK;
1238
1239 /* For split set ec_mc for immediate retries */
1240 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
1241 chan->ep_type == USB_ENDPOINT_XFER_ISOC)
1242 ec_mc = 3;
1243 else
1244 ec_mc = 1;
1245 } else {
1246 if (dbg_hc(chan))
1247 dev_vdbg(hsotg->dev, "no split\n");
1248 /*
1249 * Ensure that the transfer length and packet count will fit
1250 * in the widths allocated for them in the HCTSIZn register
1251 */
1252 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
1253 chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
1254 /*
1255 * Make sure the transfer size is no larger than one
1256 * (micro)frame's worth of data. (A check was done
1257 * when the periodic transfer was accepted to ensure
1258 * that a (micro)frame's worth of data can be
1259 * programmed into a channel.)
1260 */
1261 u32 max_periodic_len =
1262 chan->multi_count * chan->max_packet;
1263
1264 if (chan->xfer_len > max_periodic_len)
1265 chan->xfer_len = max_periodic_len;
1266 } else if (chan->xfer_len > max_hc_xfer_size) {
1267 /*
1268 * Make sure that xfer_len is a multiple of max packet
1269 * size
1270 */
1271 chan->xfer_len =
1272 max_hc_xfer_size - chan->max_packet + 1;
1273 }
1274
1275 if (chan->xfer_len > 0) {
1276 num_packets = (chan->xfer_len + chan->max_packet - 1) /
1277 chan->max_packet;
1278 if (num_packets > max_hc_pkt_count) {
1279 num_packets = max_hc_pkt_count;
1280 chan->xfer_len = num_packets * chan->max_packet;
1281 } else if (chan->ep_is_in) {
1282 /*
1283 * Always program an integral # of max packets
1284 * for IN transfers.
1285 * Note: This assumes that the input buffer is
1286 * aligned and sized accordingly.
1287 */
1288 chan->xfer_len = num_packets * chan->max_packet;
1289 }
1290 } else {
1291 /* Need 1 packet for transfer length of 0 */
1292 num_packets = 1;
1293 }
1294
1295 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
1296 chan->ep_type == USB_ENDPOINT_XFER_ISOC)
1297 /*
1298 * Make sure that the multi_count field matches the
1299 * actual transfer length
1300 */
1301 chan->multi_count = num_packets;
1302
1303 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
1304 dwc2_set_pid_isoc(chan);
1305
1306 hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
1307 TSIZ_XFERSIZE_MASK;
1308
1309 /* The ec_mc gets the multi_count for non-split */
1310 ec_mc = chan->multi_count;
1311 }
1312
1313 chan->start_pkt_count = num_packets;
1314 hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK;
1315 hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
1316 TSIZ_SC_MC_PID_MASK;
1317 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num));
1318 if (dbg_hc(chan)) {
1319 dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n",
1320 hctsiz, chan->hc_num);
1321
1322 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
1323 chan->hc_num);
1324 dev_vdbg(hsotg->dev, " Xfer Size: %d\n",
1325 (hctsiz & TSIZ_XFERSIZE_MASK) >>
1326 TSIZ_XFERSIZE_SHIFT);
1327 dev_vdbg(hsotg->dev, " Num Pkts: %d\n",
1328 (hctsiz & TSIZ_PKTCNT_MASK) >>
1329 TSIZ_PKTCNT_SHIFT);
1330 dev_vdbg(hsotg->dev, " Start PID: %d\n",
1331 (hctsiz & TSIZ_SC_MC_PID_MASK) >>
1332 TSIZ_SC_MC_PID_SHIFT);
1333 }
1334
1335 if (hsotg->params.host_dma) {
1336 dma_addr_t dma_addr;
1337
1338 if (chan->align_buf) {
1339 if (dbg_hc(chan))
1340 dev_vdbg(hsotg->dev, "align_buf\n");
1341 dma_addr = chan->align_buf;
1342 } else {
1343 dma_addr = chan->xfer_dma;
1344 }
1345 dwc2_writel(hsotg, (u32)dma_addr, HCDMA(chan->hc_num));
1346
1347 if (dbg_hc(chan))
1348 dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n",
1349 (unsigned long)dma_addr, chan->hc_num);
1350 }
1351
1352 /* Start the split */
1353 if (chan->do_split) {
1354 u32 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num));
1355
1356 hcsplt |= HCSPLT_SPLTENA;
1357 dwc2_writel(hsotg, hcsplt, HCSPLT(chan->hc_num));
1358 }
1359
1360 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
1361 hcchar &= ~HCCHAR_MULTICNT_MASK;
1362 hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK;
1363 dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
1364
1365 if (hcchar & HCCHAR_CHDIS)
1366 dev_warn(hsotg->dev,
1367 "%s: chdis set, channel %d, hcchar 0x%08x\n",
1368 __func__, chan->hc_num, hcchar);
1369
1370 /* Set host channel enable after all other setup is complete */
1371 hcchar |= HCCHAR_CHENA;
1372 hcchar &= ~HCCHAR_CHDIS;
1373
1374 if (dbg_hc(chan))
1375 dev_vdbg(hsotg->dev, " Multi Cnt: %d\n",
1376 (hcchar & HCCHAR_MULTICNT_MASK) >>
1377 HCCHAR_MULTICNT_SHIFT);
1378
1379 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
1380 if (dbg_hc(chan))
1381 dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
1382 chan->hc_num);
1383
1384 chan->xfer_started = 1;
1385 chan->requests++;
1386
1387 if (!hsotg->params.host_dma &&
1388 !chan->ep_is_in && chan->xfer_len > 0)
1389 /* Load OUT packet into the appropriate Tx FIFO */
1390 dwc2_hc_write_packet(hsotg, chan);
1391 }
1392
1393 /**
1394 * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a
1395 * host channel and starts the transfer in Descriptor DMA mode
1396 *
1397 * @hsotg: Programming view of DWC_otg controller
1398 * @chan: Information needed to initialize the host channel
1399 *
1400 * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set.
1401 * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field
1402 * with micro-frame bitmap.
1403 *
1404 * Initializes HCDMA register with descriptor list address and CTD value then
1405 * starts the transfer via enabling the channel.
1406 */
dwc2_hc_start_transfer_ddma(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan)1407 void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
1408 struct dwc2_host_chan *chan)
1409 {
1410 u32 hcchar;
1411 u32 hctsiz = 0;
1412
1413 if (chan->do_ping)
1414 hctsiz |= TSIZ_DOPNG;
1415
1416 if (chan->ep_type == USB_ENDPOINT_XFER_ISOC)
1417 dwc2_set_pid_isoc(chan);
1418
1419 /* Packet Count and Xfer Size are not used in Descriptor DMA mode */
1420 hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT &
1421 TSIZ_SC_MC_PID_MASK;
1422
1423 /* 0 - 1 descriptor, 1 - 2 descriptors, etc */
1424 hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK;
1425
1426 /* Non-zero only for high-speed interrupt endpoints */
1427 hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK;
1428
1429 if (dbg_hc(chan)) {
1430 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
1431 chan->hc_num);
1432 dev_vdbg(hsotg->dev, " Start PID: %d\n",
1433 chan->data_pid_start);
1434 dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1);
1435 }
1436
1437 dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num));
1438
1439 dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr,
1440 chan->desc_list_sz, DMA_TO_DEVICE);
1441
1442 dwc2_writel(hsotg, chan->desc_list_addr, HCDMA(chan->hc_num));
1443
1444 if (dbg_hc(chan))
1445 dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n",
1446 &chan->desc_list_addr, chan->hc_num);
1447
1448 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
1449 hcchar &= ~HCCHAR_MULTICNT_MASK;
1450 hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
1451 HCCHAR_MULTICNT_MASK;
1452
1453 if (hcchar & HCCHAR_CHDIS)
1454 dev_warn(hsotg->dev,
1455 "%s: chdis set, channel %d, hcchar 0x%08x\n",
1456 __func__, chan->hc_num, hcchar);
1457
1458 /* Set host channel enable after all other setup is complete */
1459 hcchar |= HCCHAR_CHENA;
1460 hcchar &= ~HCCHAR_CHDIS;
1461
1462 if (dbg_hc(chan))
1463 dev_vdbg(hsotg->dev, " Multi Cnt: %d\n",
1464 (hcchar & HCCHAR_MULTICNT_MASK) >>
1465 HCCHAR_MULTICNT_SHIFT);
1466
1467 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
1468 if (dbg_hc(chan))
1469 dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar,
1470 chan->hc_num);
1471
1472 chan->xfer_started = 1;
1473 chan->requests++;
1474 }
1475
1476 /**
1477 * dwc2_hc_continue_transfer() - Continues a data transfer that was started by
1478 * a previous call to dwc2_hc_start_transfer()
1479 *
1480 * @hsotg: Programming view of DWC_otg controller
1481 * @chan: Information needed to initialize the host channel
1482 *
1483 * The caller must ensure there is sufficient space in the request queue and Tx
1484 * Data FIFO. This function should only be called in Slave mode. In DMA mode,
1485 * the controller acts autonomously to complete transfers programmed to a host
1486 * channel.
1487 *
1488 * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
1489 * if there is any data remaining to be queued. For an IN transfer, another
1490 * data packet is always requested. For the SETUP phase of a control transfer,
1491 * this function does nothing.
1492 *
1493 * Return: 1 if a new request is queued, 0 if no more requests are required
1494 * for this transfer
1495 */
dwc2_hc_continue_transfer(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan)1496 static int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg,
1497 struct dwc2_host_chan *chan)
1498 {
1499 if (dbg_hc(chan))
1500 dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__,
1501 chan->hc_num);
1502
1503 if (chan->do_split)
1504 /* SPLITs always queue just once per channel */
1505 return 0;
1506
1507 if (chan->data_pid_start == DWC2_HC_PID_SETUP)
1508 /* SETUPs are queued only once since they can't be NAK'd */
1509 return 0;
1510
1511 if (chan->ep_is_in) {
1512 /*
1513 * Always queue another request for other IN transfers. If
1514 * back-to-back INs are issued and NAKs are received for both,
1515 * the driver may still be processing the first NAK when the
1516 * second NAK is received. When the interrupt handler clears
1517 * the NAK interrupt for the first NAK, the second NAK will
1518 * not be seen. So we can't depend on the NAK interrupt
1519 * handler to requeue a NAK'd request. Instead, IN requests
1520 * are issued each time this function is called. When the
1521 * transfer completes, the extra requests for the channel will
1522 * be flushed.
1523 */
1524 u32 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num));
1525
1526 dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
1527 hcchar |= HCCHAR_CHENA;
1528 hcchar &= ~HCCHAR_CHDIS;
1529 if (dbg_hc(chan))
1530 dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n",
1531 hcchar);
1532 dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num));
1533 chan->requests++;
1534 return 1;
1535 }
1536
1537 /* OUT transfers */
1538
1539 if (chan->xfer_count < chan->xfer_len) {
1540 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
1541 chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
1542 u32 hcchar = dwc2_readl(hsotg,
1543 HCCHAR(chan->hc_num));
1544
1545 dwc2_hc_set_even_odd_frame(hsotg, chan,
1546 &hcchar);
1547 }
1548
1549 /* Load OUT packet into the appropriate Tx FIFO */
1550 dwc2_hc_write_packet(hsotg, chan);
1551 chan->requests++;
1552 return 1;
1553 }
1554
1555 return 0;
1556 }
1557
1558 /*
1559 * =========================================================================
1560 * HCD
1561 * =========================================================================
1562 */
1563
1564 /*
1565 * Processes all the URBs in a single list of QHs. Completes them with
1566 * -ETIMEDOUT and frees the QTD.
1567 *
1568 * Must be called with interrupt disabled and spinlock held
1569 */
dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg * hsotg,struct list_head * qh_list)1570 static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg,
1571 struct list_head *qh_list)
1572 {
1573 struct dwc2_qh *qh, *qh_tmp;
1574 struct dwc2_qtd *qtd, *qtd_tmp;
1575
1576 list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) {
1577 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list,
1578 qtd_list_entry) {
1579 dwc2_host_complete(hsotg, qtd, -ECONNRESET);
1580 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
1581 }
1582 }
1583 }
1584
dwc2_qh_list_free(struct dwc2_hsotg * hsotg,struct list_head * qh_list)1585 static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg,
1586 struct list_head *qh_list)
1587 {
1588 struct dwc2_qtd *qtd, *qtd_tmp;
1589 struct dwc2_qh *qh, *qh_tmp;
1590 unsigned long flags;
1591
1592 if (!qh_list->next)
1593 /* The list hasn't been initialized yet */
1594 return;
1595
1596 spin_lock_irqsave(&hsotg->lock, flags);
1597
1598 /* Ensure there are no QTDs or URBs left */
1599 dwc2_kill_urbs_in_qh_list(hsotg, qh_list);
1600
1601 list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) {
1602 dwc2_hcd_qh_unlink(hsotg, qh);
1603
1604 /* Free each QTD in the QH's QTD list */
1605 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list,
1606 qtd_list_entry)
1607 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
1608
1609 if (qh->channel && qh->channel->qh == qh)
1610 qh->channel->qh = NULL;
1611
1612 spin_unlock_irqrestore(&hsotg->lock, flags);
1613 dwc2_hcd_qh_free(hsotg, qh);
1614 spin_lock_irqsave(&hsotg->lock, flags);
1615 }
1616
1617 spin_unlock_irqrestore(&hsotg->lock, flags);
1618 }
1619
1620 /*
1621 * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic
1622 * and periodic schedules. The QTD associated with each URB is removed from
1623 * the schedule and freed. This function may be called when a disconnect is
1624 * detected or when the HCD is being stopped.
1625 *
1626 * Must be called with interrupt disabled and spinlock held
1627 */
dwc2_kill_all_urbs(struct dwc2_hsotg * hsotg)1628 static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg)
1629 {
1630 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive);
1631 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_waiting);
1632 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active);
1633 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive);
1634 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready);
1635 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned);
1636 dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued);
1637 }
1638
1639 /**
1640 * dwc2_hcd_start() - Starts the HCD when switching to Host mode
1641 *
1642 * @hsotg: Pointer to struct dwc2_hsotg
1643 */
dwc2_hcd_start(struct dwc2_hsotg * hsotg)1644 void dwc2_hcd_start(struct dwc2_hsotg *hsotg)
1645 {
1646 u32 hprt0;
1647
1648 if (hsotg->op_state == OTG_STATE_B_HOST) {
1649 /*
1650 * Reset the port. During a HNP mode switch the reset
1651 * needs to occur within 1ms and have a duration of at
1652 * least 50ms.
1653 */
1654 hprt0 = dwc2_read_hprt0(hsotg);
1655 hprt0 |= HPRT0_RST;
1656 dwc2_writel(hsotg, hprt0, HPRT0);
1657 }
1658
1659 queue_delayed_work(hsotg->wq_otg, &hsotg->start_work,
1660 msecs_to_jiffies(50));
1661 }
1662
1663 /* Must be called with interrupt disabled and spinlock held */
dwc2_hcd_cleanup_channels(struct dwc2_hsotg * hsotg)1664 static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg)
1665 {
1666 int num_channels = hsotg->params.host_channels;
1667 struct dwc2_host_chan *channel;
1668 u32 hcchar;
1669 int i;
1670
1671 if (!hsotg->params.host_dma) {
1672 /* Flush out any channel requests in slave mode */
1673 for (i = 0; i < num_channels; i++) {
1674 channel = hsotg->hc_ptr_array[i];
1675 if (!list_empty(&channel->hc_list_entry))
1676 continue;
1677 hcchar = dwc2_readl(hsotg, HCCHAR(i));
1678 if (hcchar & HCCHAR_CHENA) {
1679 hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR);
1680 hcchar |= HCCHAR_CHDIS;
1681 dwc2_writel(hsotg, hcchar, HCCHAR(i));
1682 }
1683 }
1684 }
1685
1686 for (i = 0; i < num_channels; i++) {
1687 channel = hsotg->hc_ptr_array[i];
1688 if (!list_empty(&channel->hc_list_entry))
1689 continue;
1690 hcchar = dwc2_readl(hsotg, HCCHAR(i));
1691 if (hcchar & HCCHAR_CHENA) {
1692 /* Halt the channel */
1693 hcchar |= HCCHAR_CHDIS;
1694 dwc2_writel(hsotg, hcchar, HCCHAR(i));
1695 }
1696
1697 dwc2_hc_cleanup(hsotg, channel);
1698 list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list);
1699 /*
1700 * Added for Descriptor DMA to prevent channel double cleanup in
1701 * release_channel_ddma(), which is called from ep_disable when
1702 * device disconnects
1703 */
1704 channel->qh = NULL;
1705 }
1706 /* All channels have been freed, mark them available */
1707 if (hsotg->params.uframe_sched) {
1708 hsotg->available_host_channels =
1709 hsotg->params.host_channels;
1710 } else {
1711 hsotg->non_periodic_channels = 0;
1712 hsotg->periodic_channels = 0;
1713 }
1714 }
1715
1716 /**
1717 * dwc2_hcd_connect() - Handles connect of the HCD
1718 *
1719 * @hsotg: Pointer to struct dwc2_hsotg
1720 *
1721 * Must be called with interrupt disabled and spinlock held
1722 */
dwc2_hcd_connect(struct dwc2_hsotg * hsotg)1723 void dwc2_hcd_connect(struct dwc2_hsotg *hsotg)
1724 {
1725 if (hsotg->lx_state != DWC2_L0)
1726 usb_hcd_resume_root_hub(hsotg->priv);
1727
1728 hsotg->flags.b.port_connect_status_change = 1;
1729 hsotg->flags.b.port_connect_status = 1;
1730 }
1731
1732 /**
1733 * dwc2_hcd_disconnect() - Handles disconnect of the HCD
1734 *
1735 * @hsotg: Pointer to struct dwc2_hsotg
1736 * @force: If true, we won't try to reconnect even if we see device connected.
1737 *
1738 * Must be called with interrupt disabled and spinlock held
1739 */
dwc2_hcd_disconnect(struct dwc2_hsotg * hsotg,bool force)1740 void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force)
1741 {
1742 u32 intr;
1743 u32 hprt0;
1744
1745 /* Set status flags for the hub driver */
1746 hsotg->flags.b.port_connect_status_change = 1;
1747 hsotg->flags.b.port_connect_status = 0;
1748
1749 /*
1750 * Shutdown any transfers in process by clearing the Tx FIFO Empty
1751 * interrupt mask and status bits and disabling subsequent host
1752 * channel interrupts.
1753 */
1754 intr = dwc2_readl(hsotg, GINTMSK);
1755 intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT);
1756 dwc2_writel(hsotg, intr, GINTMSK);
1757 intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT;
1758 dwc2_writel(hsotg, intr, GINTSTS);
1759
1760 /*
1761 * Turn off the vbus power only if the core has transitioned to device
1762 * mode. If still in host mode, need to keep power on to detect a
1763 * reconnection.
1764 */
1765 if (dwc2_is_device_mode(hsotg)) {
1766 if (hsotg->op_state != OTG_STATE_A_SUSPEND) {
1767 dev_dbg(hsotg->dev, "Disconnect: PortPower off\n");
1768 dwc2_writel(hsotg, 0, HPRT0);
1769 }
1770
1771 dwc2_disable_host_interrupts(hsotg);
1772 }
1773
1774 /* Respond with an error status to all URBs in the schedule */
1775 dwc2_kill_all_urbs(hsotg);
1776
1777 if (dwc2_is_host_mode(hsotg))
1778 /* Clean up any host channels that were in use */
1779 dwc2_hcd_cleanup_channels(hsotg);
1780
1781 dwc2_host_disconnect(hsotg);
1782
1783 /*
1784 * Add an extra check here to see if we're actually connected but
1785 * we don't have a detection interrupt pending. This can happen if:
1786 * 1. hardware sees connect
1787 * 2. hardware sees disconnect
1788 * 3. hardware sees connect
1789 * 4. dwc2_port_intr() - clears connect interrupt
1790 * 5. dwc2_handle_common_intr() - calls here
1791 *
1792 * Without the extra check here we will end calling disconnect
1793 * and won't get any future interrupts to handle the connect.
1794 */
1795 if (!force) {
1796 hprt0 = dwc2_readl(hsotg, HPRT0);
1797 if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS))
1798 dwc2_hcd_connect(hsotg);
1799 }
1800 }
1801
1802 /**
1803 * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup
1804 *
1805 * @hsotg: Pointer to struct dwc2_hsotg
1806 */
dwc2_hcd_rem_wakeup(struct dwc2_hsotg * hsotg)1807 static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg)
1808 {
1809 if (hsotg->bus_suspended) {
1810 hsotg->flags.b.port_suspend_change = 1;
1811 usb_hcd_resume_root_hub(hsotg->priv);
1812 }
1813
1814 if (hsotg->lx_state == DWC2_L1)
1815 hsotg->flags.b.port_l1_change = 1;
1816 }
1817
1818 /**
1819 * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner
1820 *
1821 * @hsotg: Pointer to struct dwc2_hsotg
1822 *
1823 * Must be called with interrupt disabled and spinlock held
1824 */
dwc2_hcd_stop(struct dwc2_hsotg * hsotg)1825 void dwc2_hcd_stop(struct dwc2_hsotg *hsotg)
1826 {
1827 dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n");
1828
1829 /*
1830 * The root hub should be disconnected before this function is called.
1831 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
1832 * and the QH lists (via ..._hcd_endpoint_disable).
1833 */
1834
1835 /* Turn off all host-specific interrupts */
1836 dwc2_disable_host_interrupts(hsotg);
1837
1838 /* Turn off the vbus power */
1839 dev_dbg(hsotg->dev, "PortPower off\n");
1840 dwc2_writel(hsotg, 0, HPRT0);
1841 }
1842
1843 /* Caller must hold driver lock */
dwc2_hcd_urb_enqueue(struct dwc2_hsotg * hsotg,struct dwc2_hcd_urb * urb,struct dwc2_qh * qh,struct dwc2_qtd * qtd)1844 static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg,
1845 struct dwc2_hcd_urb *urb, struct dwc2_qh *qh,
1846 struct dwc2_qtd *qtd)
1847 {
1848 u32 intr_mask;
1849 int retval;
1850 int dev_speed;
1851
1852 if (!hsotg->flags.b.port_connect_status) {
1853 /* No longer connected */
1854 dev_err(hsotg->dev, "Not connected\n");
1855 return -ENODEV;
1856 }
1857
1858 dev_speed = dwc2_host_get_speed(hsotg, urb->priv);
1859
1860 /* Some configurations cannot support LS traffic on a FS root port */
1861 if ((dev_speed == USB_SPEED_LOW) &&
1862 (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) &&
1863 (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) {
1864 u32 hprt0 = dwc2_readl(hsotg, HPRT0);
1865 u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
1866
1867 if (prtspd == HPRT0_SPD_FULL_SPEED)
1868 return -ENODEV;
1869 }
1870
1871 if (!qtd)
1872 return -EINVAL;
1873
1874 dwc2_hcd_qtd_init(qtd, urb);
1875 retval = dwc2_hcd_qtd_add(hsotg, qtd, qh);
1876 if (retval) {
1877 dev_err(hsotg->dev,
1878 "DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n",
1879 retval);
1880 return retval;
1881 }
1882
1883 intr_mask = dwc2_readl(hsotg, GINTMSK);
1884 if (!(intr_mask & GINTSTS_SOF)) {
1885 enum dwc2_transaction_type tr_type;
1886
1887 if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK &&
1888 !(qtd->urb->flags & URB_GIVEBACK_ASAP))
1889 /*
1890 * Do not schedule SG transactions until qtd has
1891 * URB_GIVEBACK_ASAP set
1892 */
1893 return 0;
1894
1895 tr_type = dwc2_hcd_select_transactions(hsotg);
1896 if (tr_type != DWC2_TRANSACTION_NONE)
1897 dwc2_hcd_queue_transactions(hsotg, tr_type);
1898 }
1899
1900 return 0;
1901 }
1902
1903 /* Must be called with interrupt disabled and spinlock held */
dwc2_hcd_urb_dequeue(struct dwc2_hsotg * hsotg,struct dwc2_hcd_urb * urb)1904 static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg,
1905 struct dwc2_hcd_urb *urb)
1906 {
1907 struct dwc2_qh *qh;
1908 struct dwc2_qtd *urb_qtd;
1909
1910 urb_qtd = urb->qtd;
1911 if (!urb_qtd) {
1912 dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n");
1913 return -EINVAL;
1914 }
1915
1916 qh = urb_qtd->qh;
1917 if (!qh) {
1918 dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n");
1919 return -EINVAL;
1920 }
1921
1922 urb->priv = NULL;
1923
1924 if (urb_qtd->in_process && qh->channel) {
1925 dwc2_dump_channel_info(hsotg, qh->channel);
1926
1927 /* The QTD is in process (it has been assigned to a channel) */
1928 if (hsotg->flags.b.port_connect_status)
1929 /*
1930 * If still connected (i.e. in host mode), halt the
1931 * channel so it can be used for other transfers. If
1932 * no longer connected, the host registers can't be
1933 * written to halt the channel since the core is in
1934 * device mode.
1935 */
1936 dwc2_hc_halt(hsotg, qh->channel,
1937 DWC2_HC_XFER_URB_DEQUEUE);
1938 }
1939
1940 /*
1941 * Free the QTD and clean up the associated QH. Leave the QH in the
1942 * schedule if it has any remaining QTDs.
1943 */
1944 if (!hsotg->params.dma_desc_enable) {
1945 u8 in_process = urb_qtd->in_process;
1946
1947 dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh);
1948 if (in_process) {
1949 dwc2_hcd_qh_deactivate(hsotg, qh, 0);
1950 qh->channel = NULL;
1951 } else if (list_empty(&qh->qtd_list)) {
1952 dwc2_hcd_qh_unlink(hsotg, qh);
1953 }
1954 } else {
1955 dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh);
1956 }
1957
1958 return 0;
1959 }
1960
1961 /* Must NOT be called with interrupt disabled or spinlock held */
dwc2_hcd_endpoint_disable(struct dwc2_hsotg * hsotg,struct usb_host_endpoint * ep,int retry)1962 static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg,
1963 struct usb_host_endpoint *ep, int retry)
1964 {
1965 struct dwc2_qtd *qtd, *qtd_tmp;
1966 struct dwc2_qh *qh;
1967 unsigned long flags;
1968 int rc;
1969
1970 spin_lock_irqsave(&hsotg->lock, flags);
1971
1972 qh = ep->hcpriv;
1973 if (!qh) {
1974 rc = -EINVAL;
1975 goto err;
1976 }
1977
1978 while (!list_empty(&qh->qtd_list) && retry--) {
1979 if (retry == 0) {
1980 dev_err(hsotg->dev,
1981 "## timeout in dwc2_hcd_endpoint_disable() ##\n");
1982 rc = -EBUSY;
1983 goto err;
1984 }
1985
1986 spin_unlock_irqrestore(&hsotg->lock, flags);
1987 msleep(20);
1988 spin_lock_irqsave(&hsotg->lock, flags);
1989 qh = ep->hcpriv;
1990 if (!qh) {
1991 rc = -EINVAL;
1992 goto err;
1993 }
1994 }
1995
1996 dwc2_hcd_qh_unlink(hsotg, qh);
1997
1998 /* Free each QTD in the QH's QTD list */
1999 list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry)
2000 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
2001
2002 ep->hcpriv = NULL;
2003
2004 if (qh->channel && qh->channel->qh == qh)
2005 qh->channel->qh = NULL;
2006
2007 spin_unlock_irqrestore(&hsotg->lock, flags);
2008
2009 dwc2_hcd_qh_free(hsotg, qh);
2010
2011 return 0;
2012
2013 err:
2014 ep->hcpriv = NULL;
2015 spin_unlock_irqrestore(&hsotg->lock, flags);
2016
2017 return rc;
2018 }
2019
2020 /* Must be called with interrupt disabled and spinlock held */
dwc2_hcd_endpoint_reset(struct dwc2_hsotg * hsotg,struct usb_host_endpoint * ep)2021 static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg,
2022 struct usb_host_endpoint *ep)
2023 {
2024 struct dwc2_qh *qh = ep->hcpriv;
2025
2026 if (!qh)
2027 return -EINVAL;
2028
2029 qh->data_toggle = DWC2_HC_PID_DATA0;
2030
2031 return 0;
2032 }
2033
2034 /**
2035 * dwc2_core_init() - Initializes the DWC_otg controller registers and
2036 * prepares the core for device mode or host mode operation
2037 *
2038 * @hsotg: Programming view of the DWC_otg controller
2039 * @initial_setup: If true then this is the first init for this instance.
2040 */
dwc2_core_init(struct dwc2_hsotg * hsotg,bool initial_setup)2041 int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
2042 {
2043 u32 usbcfg, otgctl;
2044 int retval;
2045
2046 dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
2047
2048 usbcfg = dwc2_readl(hsotg, GUSBCFG);
2049
2050 /* Set ULPI External VBUS bit if needed */
2051 usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV;
2052 if (hsotg->params.phy_ulpi_ext_vbus)
2053 usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV;
2054
2055 /* Set external TS Dline pulsing bit if needed */
2056 usbcfg &= ~GUSBCFG_TERMSELDLPULSE;
2057 if (hsotg->params.ts_dline)
2058 usbcfg |= GUSBCFG_TERMSELDLPULSE;
2059
2060 dwc2_writel(hsotg, usbcfg, GUSBCFG);
2061
2062 /*
2063 * Reset the Controller
2064 *
2065 * We only need to reset the controller if this is a re-init.
2066 * For the first init we know for sure that earlier code reset us (it
2067 * needed to in order to properly detect various parameters).
2068 */
2069 if (!initial_setup) {
2070 retval = dwc2_core_reset(hsotg, false);
2071 if (retval) {
2072 dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
2073 __func__);
2074 return retval;
2075 }
2076 }
2077
2078 /*
2079 * This needs to happen in FS mode before any other programming occurs
2080 */
2081 retval = dwc2_phy_init(hsotg, initial_setup);
2082 if (retval)
2083 return retval;
2084
2085 /* Program the GAHBCFG Register */
2086 retval = dwc2_gahbcfg_init(hsotg);
2087 if (retval)
2088 return retval;
2089
2090 /* Program the GUSBCFG register */
2091 dwc2_gusbcfg_init(hsotg);
2092
2093 /* Program the GOTGCTL register */
2094 otgctl = dwc2_readl(hsotg, GOTGCTL);
2095 otgctl &= ~GOTGCTL_OTGVER;
2096 dwc2_writel(hsotg, otgctl, GOTGCTL);
2097
2098 /* Clear the SRP success bit for FS-I2c */
2099 hsotg->srp_success = 0;
2100
2101 /* Enable common interrupts */
2102 dwc2_enable_common_interrupts(hsotg);
2103
2104 /*
2105 * Do device or host initialization based on mode during PCD and
2106 * HCD initialization
2107 */
2108 if (dwc2_is_host_mode(hsotg)) {
2109 dev_dbg(hsotg->dev, "Host Mode\n");
2110 hsotg->op_state = OTG_STATE_A_HOST;
2111 } else {
2112 dev_dbg(hsotg->dev, "Device Mode\n");
2113 hsotg->op_state = OTG_STATE_B_PERIPHERAL;
2114 }
2115
2116 return 0;
2117 }
2118
2119 /**
2120 * dwc2_core_host_init() - Initializes the DWC_otg controller registers for
2121 * Host mode
2122 *
2123 * @hsotg: Programming view of DWC_otg controller
2124 *
2125 * This function flushes the Tx and Rx FIFOs and flushes any entries in the
2126 * request queues. Host channels are reset to ensure that they are ready for
2127 * performing transfers.
2128 */
dwc2_core_host_init(struct dwc2_hsotg * hsotg)2129 static void dwc2_core_host_init(struct dwc2_hsotg *hsotg)
2130 {
2131 u32 hcfg, hfir, otgctl, usbcfg;
2132
2133 dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg);
2134
2135 /* Set HS/FS Timeout Calibration to 7 (max available value).
2136 * The number of PHY clocks that the application programs in
2137 * this field is added to the high/full speed interpacket timeout
2138 * duration in the core to account for any additional delays
2139 * introduced by the PHY. This can be required, because the delay
2140 * introduced by the PHY in generating the linestate condition
2141 * can vary from one PHY to another.
2142 */
2143 usbcfg = dwc2_readl(hsotg, GUSBCFG);
2144 usbcfg |= GUSBCFG_TOUTCAL(7);
2145 dwc2_writel(hsotg, usbcfg, GUSBCFG);
2146
2147 /* Restart the Phy Clock */
2148 dwc2_writel(hsotg, 0, PCGCTL);
2149
2150 /* Initialize Host Configuration Register */
2151 dwc2_init_fs_ls_pclk_sel(hsotg);
2152 if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
2153 hsotg->params.speed == DWC2_SPEED_PARAM_LOW) {
2154 hcfg = dwc2_readl(hsotg, HCFG);
2155 hcfg |= HCFG_FSLSSUPP;
2156 dwc2_writel(hsotg, hcfg, HCFG);
2157 }
2158
2159 /*
2160 * This bit allows dynamic reloading of the HFIR register during
2161 * runtime. This bit needs to be programmed during initial configuration
2162 * and its value must not be changed during runtime.
2163 */
2164 if (hsotg->params.reload_ctl) {
2165 hfir = dwc2_readl(hsotg, HFIR);
2166 hfir |= HFIR_RLDCTRL;
2167 dwc2_writel(hsotg, hfir, HFIR);
2168 }
2169
2170 if (hsotg->params.dma_desc_enable) {
2171 u32 op_mode = hsotg->hw_params.op_mode;
2172
2173 if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a ||
2174 !hsotg->hw_params.dma_desc_enable ||
2175 op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE ||
2176 op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE ||
2177 op_mode == GHWCFG2_OP_MODE_UNDEFINED) {
2178 dev_err(hsotg->dev,
2179 "Hardware does not support descriptor DMA mode -\n");
2180 dev_err(hsotg->dev,
2181 "falling back to buffer DMA mode.\n");
2182 hsotg->params.dma_desc_enable = false;
2183 } else {
2184 hcfg = dwc2_readl(hsotg, HCFG);
2185 hcfg |= HCFG_DESCDMA;
2186 dwc2_writel(hsotg, hcfg, HCFG);
2187 }
2188 }
2189
2190 /* Configure data FIFO sizes */
2191 dwc2_config_fifos(hsotg);
2192
2193 /* TODO - check this */
2194 /* Clear Host Set HNP Enable in the OTG Control Register */
2195 otgctl = dwc2_readl(hsotg, GOTGCTL);
2196 otgctl &= ~GOTGCTL_HSTSETHNPEN;
2197 dwc2_writel(hsotg, otgctl, GOTGCTL);
2198
2199 /* Make sure the FIFOs are flushed */
2200 dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */);
2201 dwc2_flush_rx_fifo(hsotg);
2202
2203 /* Clear Host Set HNP Enable in the OTG Control Register */
2204 otgctl = dwc2_readl(hsotg, GOTGCTL);
2205 otgctl &= ~GOTGCTL_HSTSETHNPEN;
2206 dwc2_writel(hsotg, otgctl, GOTGCTL);
2207
2208 if (!hsotg->params.dma_desc_enable) {
2209 int num_channels, i;
2210 u32 hcchar;
2211
2212 /* Flush out any leftover queued requests */
2213 num_channels = hsotg->params.host_channels;
2214 for (i = 0; i < num_channels; i++) {
2215 hcchar = dwc2_readl(hsotg, HCCHAR(i));
2216 if (hcchar & HCCHAR_CHENA) {
2217 hcchar &= ~HCCHAR_CHENA;
2218 hcchar |= HCCHAR_CHDIS;
2219 hcchar &= ~HCCHAR_EPDIR;
2220 dwc2_writel(hsotg, hcchar, HCCHAR(i));
2221 }
2222 }
2223
2224 /* Halt all channels to put them into a known state */
2225 for (i = 0; i < num_channels; i++) {
2226 hcchar = dwc2_readl(hsotg, HCCHAR(i));
2227 if (hcchar & HCCHAR_CHENA) {
2228 hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
2229 hcchar &= ~HCCHAR_EPDIR;
2230 dwc2_writel(hsotg, hcchar, HCCHAR(i));
2231 dev_dbg(hsotg->dev, "%s: Halt channel %d\n",
2232 __func__, i);
2233
2234 if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i),
2235 HCCHAR_CHENA,
2236 1000)) {
2237 dev_warn(hsotg->dev,
2238 "Unable to clear enable on channel %d\n",
2239 i);
2240 }
2241 }
2242 }
2243 }
2244
2245 /* Enable ACG feature in host mode, if supported */
2246 dwc2_enable_acg(hsotg);
2247
2248 /* Turn on the vbus power */
2249 dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state);
2250 if (hsotg->op_state == OTG_STATE_A_HOST) {
2251 u32 hprt0 = dwc2_read_hprt0(hsotg);
2252
2253 dev_dbg(hsotg->dev, "Init: Power Port (%d)\n",
2254 !!(hprt0 & HPRT0_PWR));
2255 if (!(hprt0 & HPRT0_PWR)) {
2256 hprt0 |= HPRT0_PWR;
2257 dwc2_writel(hsotg, hprt0, HPRT0);
2258 }
2259 }
2260
2261 dwc2_enable_host_interrupts(hsotg);
2262 }
2263
2264 /*
2265 * Initializes dynamic portions of the DWC_otg HCD state
2266 *
2267 * Must be called with interrupt disabled and spinlock held
2268 */
dwc2_hcd_reinit(struct dwc2_hsotg * hsotg)2269 static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg)
2270 {
2271 struct dwc2_host_chan *chan, *chan_tmp;
2272 int num_channels;
2273 int i;
2274
2275 hsotg->flags.d32 = 0;
2276 hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active;
2277
2278 if (hsotg->params.uframe_sched) {
2279 hsotg->available_host_channels =
2280 hsotg->params.host_channels;
2281 } else {
2282 hsotg->non_periodic_channels = 0;
2283 hsotg->periodic_channels = 0;
2284 }
2285
2286 /*
2287 * Put all channels in the free channel list and clean up channel
2288 * states
2289 */
2290 list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list,
2291 hc_list_entry)
2292 list_del_init(&chan->hc_list_entry);
2293
2294 num_channels = hsotg->params.host_channels;
2295 for (i = 0; i < num_channels; i++) {
2296 chan = hsotg->hc_ptr_array[i];
2297 list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list);
2298 dwc2_hc_cleanup(hsotg, chan);
2299 }
2300
2301 /* Initialize the DWC core for host mode operation */
2302 dwc2_core_host_init(hsotg);
2303 }
2304
dwc2_hc_init_split(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan,struct dwc2_qtd * qtd,struct dwc2_hcd_urb * urb)2305 static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg,
2306 struct dwc2_host_chan *chan,
2307 struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb)
2308 {
2309 int hub_addr, hub_port;
2310
2311 chan->do_split = 1;
2312 chan->xact_pos = qtd->isoc_split_pos;
2313 chan->complete_split = qtd->complete_split;
2314 dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port);
2315 chan->hub_addr = (u8)hub_addr;
2316 chan->hub_port = (u8)hub_port;
2317 }
2318
dwc2_hc_init_xfer(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan,struct dwc2_qtd * qtd)2319 static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg,
2320 struct dwc2_host_chan *chan,
2321 struct dwc2_qtd *qtd)
2322 {
2323 struct dwc2_hcd_urb *urb = qtd->urb;
2324 struct dwc2_hcd_iso_packet_desc *frame_desc;
2325
2326 switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) {
2327 case USB_ENDPOINT_XFER_CONTROL:
2328 chan->ep_type = USB_ENDPOINT_XFER_CONTROL;
2329
2330 switch (qtd->control_phase) {
2331 case DWC2_CONTROL_SETUP:
2332 dev_vdbg(hsotg->dev, " Control setup transaction\n");
2333 chan->do_ping = 0;
2334 chan->ep_is_in = 0;
2335 chan->data_pid_start = DWC2_HC_PID_SETUP;
2336 if (hsotg->params.host_dma)
2337 chan->xfer_dma = urb->setup_dma;
2338 else
2339 chan->xfer_buf = urb->setup_packet;
2340 chan->xfer_len = 8;
2341 break;
2342
2343 case DWC2_CONTROL_DATA:
2344 dev_vdbg(hsotg->dev, " Control data transaction\n");
2345 chan->data_pid_start = qtd->data_toggle;
2346 break;
2347
2348 case DWC2_CONTROL_STATUS:
2349 /*
2350 * Direction is opposite of data direction or IN if no
2351 * data
2352 */
2353 dev_vdbg(hsotg->dev, " Control status transaction\n");
2354 if (urb->length == 0)
2355 chan->ep_is_in = 1;
2356 else
2357 chan->ep_is_in =
2358 dwc2_hcd_is_pipe_out(&urb->pipe_info);
2359 if (chan->ep_is_in)
2360 chan->do_ping = 0;
2361 chan->data_pid_start = DWC2_HC_PID_DATA1;
2362 chan->xfer_len = 0;
2363 if (hsotg->params.host_dma)
2364 chan->xfer_dma = hsotg->status_buf_dma;
2365 else
2366 chan->xfer_buf = hsotg->status_buf;
2367 break;
2368 }
2369 break;
2370
2371 case USB_ENDPOINT_XFER_BULK:
2372 chan->ep_type = USB_ENDPOINT_XFER_BULK;
2373 break;
2374
2375 case USB_ENDPOINT_XFER_INT:
2376 chan->ep_type = USB_ENDPOINT_XFER_INT;
2377 break;
2378
2379 case USB_ENDPOINT_XFER_ISOC:
2380 chan->ep_type = USB_ENDPOINT_XFER_ISOC;
2381 if (hsotg->params.dma_desc_enable)
2382 break;
2383
2384 frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
2385 frame_desc->status = 0;
2386
2387 if (hsotg->params.host_dma) {
2388 chan->xfer_dma = urb->dma;
2389 chan->xfer_dma += frame_desc->offset +
2390 qtd->isoc_split_offset;
2391 } else {
2392 chan->xfer_buf = urb->buf;
2393 chan->xfer_buf += frame_desc->offset +
2394 qtd->isoc_split_offset;
2395 }
2396
2397 chan->xfer_len = frame_desc->length - qtd->isoc_split_offset;
2398
2399 if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) {
2400 if (chan->xfer_len <= 188)
2401 chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL;
2402 else
2403 chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN;
2404 }
2405 break;
2406 }
2407 }
2408
dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg * hsotg,struct dwc2_qh * qh,struct dwc2_host_chan * chan)2409 static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg,
2410 struct dwc2_qh *qh,
2411 struct dwc2_host_chan *chan)
2412 {
2413 if (!hsotg->unaligned_cache ||
2414 chan->max_packet > DWC2_KMEM_UNALIGNED_BUF_SIZE)
2415 return -ENOMEM;
2416
2417 if (!qh->dw_align_buf) {
2418 qh->dw_align_buf = kmem_cache_alloc(hsotg->unaligned_cache,
2419 GFP_ATOMIC | GFP_DMA);
2420 if (!qh->dw_align_buf)
2421 return -ENOMEM;
2422 }
2423
2424 qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf,
2425 DWC2_KMEM_UNALIGNED_BUF_SIZE,
2426 DMA_FROM_DEVICE);
2427
2428 if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) {
2429 dev_err(hsotg->dev, "can't map align_buf\n");
2430 chan->align_buf = 0;
2431 return -EINVAL;
2432 }
2433
2434 chan->align_buf = qh->dw_align_buf_dma;
2435 return 0;
2436 }
2437
2438 #define DWC2_USB_DMA_ALIGN 4
2439
dwc2_free_dma_aligned_buffer(struct urb * urb)2440 static void dwc2_free_dma_aligned_buffer(struct urb *urb)
2441 {
2442 void *stored_xfer_buffer;
2443 size_t length;
2444
2445 if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
2446 return;
2447
2448 /* Restore urb->transfer_buffer from the end of the allocated area */
2449 memcpy(&stored_xfer_buffer,
2450 PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length,
2451 dma_get_cache_alignment()),
2452 sizeof(urb->transfer_buffer));
2453
2454 if (usb_urb_dir_in(urb)) {
2455 if (usb_pipeisoc(urb->pipe))
2456 length = urb->transfer_buffer_length;
2457 else
2458 length = urb->actual_length;
2459
2460 memcpy(stored_xfer_buffer, urb->transfer_buffer, length);
2461 }
2462 kfree(urb->transfer_buffer);
2463 urb->transfer_buffer = stored_xfer_buffer;
2464
2465 urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
2466 }
2467
dwc2_alloc_dma_aligned_buffer(struct urb * urb,gfp_t mem_flags)2468 static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
2469 {
2470 void *kmalloc_ptr;
2471 size_t kmalloc_size;
2472
2473 if (urb->num_sgs || urb->sg ||
2474 urb->transfer_buffer_length == 0 ||
2475 !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1)))
2476 return 0;
2477
2478 /*
2479 * Allocate a buffer with enough padding for original transfer_buffer
2480 * pointer. This allocation is guaranteed to be aligned properly for
2481 * DMA
2482 */
2483 kmalloc_size = urb->transfer_buffer_length +
2484 (dma_get_cache_alignment() - 1) +
2485 sizeof(urb->transfer_buffer);
2486
2487 kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
2488 if (!kmalloc_ptr)
2489 return -ENOMEM;
2490
2491 /*
2492 * Position value of original urb->transfer_buffer pointer to the end
2493 * of allocation for later referencing
2494 */
2495 memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length,
2496 dma_get_cache_alignment()),
2497 &urb->transfer_buffer, sizeof(urb->transfer_buffer));
2498
2499 if (usb_urb_dir_out(urb))
2500 memcpy(kmalloc_ptr, urb->transfer_buffer,
2501 urb->transfer_buffer_length);
2502 urb->transfer_buffer = kmalloc_ptr;
2503
2504 urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
2505
2506 return 0;
2507 }
2508
dwc2_map_urb_for_dma(struct usb_hcd * hcd,struct urb * urb,gfp_t mem_flags)2509 static int dwc2_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
2510 gfp_t mem_flags)
2511 {
2512 int ret;
2513
2514 /* We assume setup_dma is always aligned; warn if not */
2515 WARN_ON_ONCE(urb->setup_dma &&
2516 (urb->setup_dma & (DWC2_USB_DMA_ALIGN - 1)));
2517
2518 ret = dwc2_alloc_dma_aligned_buffer(urb, mem_flags);
2519 if (ret)
2520 return ret;
2521
2522 ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
2523 if (ret)
2524 dwc2_free_dma_aligned_buffer(urb);
2525
2526 return ret;
2527 }
2528
dwc2_unmap_urb_for_dma(struct usb_hcd * hcd,struct urb * urb)2529 static void dwc2_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
2530 {
2531 usb_hcd_unmap_urb_for_dma(hcd, urb);
2532 dwc2_free_dma_aligned_buffer(urb);
2533 }
2534
2535 /**
2536 * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host
2537 * channel and initializes the host channel to perform the transactions. The
2538 * host channel is removed from the free list.
2539 *
2540 * @hsotg: The HCD state structure
2541 * @qh: Transactions from the first QTD for this QH are selected and assigned
2542 * to a free host channel
2543 */
dwc2_assign_and_init_hc(struct dwc2_hsotg * hsotg,struct dwc2_qh * qh)2544 static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
2545 {
2546 struct dwc2_host_chan *chan;
2547 struct dwc2_hcd_urb *urb;
2548 struct dwc2_qtd *qtd;
2549
2550 if (dbg_qh(qh))
2551 dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh);
2552
2553 if (list_empty(&qh->qtd_list)) {
2554 dev_dbg(hsotg->dev, "No QTDs in QH list\n");
2555 return -ENOMEM;
2556 }
2557
2558 if (list_empty(&hsotg->free_hc_list)) {
2559 dev_dbg(hsotg->dev, "No free channel to assign\n");
2560 return -ENOMEM;
2561 }
2562
2563 chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan,
2564 hc_list_entry);
2565
2566 /* Remove host channel from free list */
2567 list_del_init(&chan->hc_list_entry);
2568
2569 qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry);
2570 urb = qtd->urb;
2571 qh->channel = chan;
2572 qtd->in_process = 1;
2573
2574 /*
2575 * Use usb_pipedevice to determine device address. This address is
2576 * 0 before the SET_ADDRESS command and the correct address afterward.
2577 */
2578 chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info);
2579 chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info);
2580 chan->speed = qh->dev_speed;
2581 chan->max_packet = qh->maxp;
2582
2583 chan->xfer_started = 0;
2584 chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
2585 chan->error_state = (qtd->error_count > 0);
2586 chan->halt_on_queue = 0;
2587 chan->halt_pending = 0;
2588 chan->requests = 0;
2589
2590 /*
2591 * The following values may be modified in the transfer type section
2592 * below. The xfer_len value may be reduced when the transfer is
2593 * started to accommodate the max widths of the XferSize and PktCnt
2594 * fields in the HCTSIZn register.
2595 */
2596
2597 chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0);
2598 if (chan->ep_is_in)
2599 chan->do_ping = 0;
2600 else
2601 chan->do_ping = qh->ping_state;
2602
2603 chan->data_pid_start = qh->data_toggle;
2604 chan->multi_count = 1;
2605
2606 if (urb->actual_length > urb->length &&
2607 !dwc2_hcd_is_pipe_in(&urb->pipe_info))
2608 urb->actual_length = urb->length;
2609
2610 if (hsotg->params.host_dma)
2611 chan->xfer_dma = urb->dma + urb->actual_length;
2612 else
2613 chan->xfer_buf = (u8 *)urb->buf + urb->actual_length;
2614
2615 chan->xfer_len = urb->length - urb->actual_length;
2616 chan->xfer_count = 0;
2617
2618 /* Set the split attributes if required */
2619 if (qh->do_split)
2620 dwc2_hc_init_split(hsotg, chan, qtd, urb);
2621 else
2622 chan->do_split = 0;
2623
2624 /* Set the transfer attributes */
2625 dwc2_hc_init_xfer(hsotg, chan, qtd);
2626
2627 /* For non-dword aligned buffers */
2628 if (hsotg->params.host_dma && qh->do_split &&
2629 chan->ep_is_in && (chan->xfer_dma & 0x3)) {
2630 dev_vdbg(hsotg->dev, "Non-aligned buffer\n");
2631 if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) {
2632 dev_err(hsotg->dev,
2633 "Failed to allocate memory to handle non-aligned buffer\n");
2634 /* Add channel back to free list */
2635 chan->align_buf = 0;
2636 chan->multi_count = 0;
2637 list_add_tail(&chan->hc_list_entry,
2638 &hsotg->free_hc_list);
2639 qtd->in_process = 0;
2640 qh->channel = NULL;
2641 return -ENOMEM;
2642 }
2643 } else {
2644 /*
2645 * We assume that DMA is always aligned in non-split
2646 * case or split out case. Warn if not.
2647 */
2648 WARN_ON_ONCE(hsotg->params.host_dma &&
2649 (chan->xfer_dma & 0x3));
2650 chan->align_buf = 0;
2651 }
2652
2653 if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
2654 chan->ep_type == USB_ENDPOINT_XFER_ISOC)
2655 /*
2656 * This value may be modified when the transfer is started
2657 * to reflect the actual transfer length
2658 */
2659 chan->multi_count = qh->maxp_mult;
2660
2661 if (hsotg->params.dma_desc_enable) {
2662 chan->desc_list_addr = qh->desc_list_dma;
2663 chan->desc_list_sz = qh->desc_list_sz;
2664 }
2665
2666 dwc2_hc_init(hsotg, chan);
2667 chan->qh = qh;
2668
2669 return 0;
2670 }
2671
2672 /**
2673 * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer
2674 * schedule and assigns them to available host channels. Called from the HCD
2675 * interrupt handler functions.
2676 *
2677 * @hsotg: The HCD state structure
2678 *
2679 * Return: The types of new transactions that were assigned to host channels
2680 */
dwc2_hcd_select_transactions(struct dwc2_hsotg * hsotg)2681 enum dwc2_transaction_type dwc2_hcd_select_transactions(
2682 struct dwc2_hsotg *hsotg)
2683 {
2684 enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE;
2685 struct list_head *qh_ptr;
2686 struct dwc2_qh *qh;
2687 int num_channels;
2688
2689 #ifdef DWC2_DEBUG_SOF
2690 dev_vdbg(hsotg->dev, " Select Transactions\n");
2691 #endif
2692
2693 /* Process entries in the periodic ready list */
2694 qh_ptr = hsotg->periodic_sched_ready.next;
2695 while (qh_ptr != &hsotg->periodic_sched_ready) {
2696 if (list_empty(&hsotg->free_hc_list))
2697 break;
2698 if (hsotg->params.uframe_sched) {
2699 if (hsotg->available_host_channels <= 1)
2700 break;
2701 hsotg->available_host_channels--;
2702 }
2703 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
2704 if (dwc2_assign_and_init_hc(hsotg, qh)) {
2705 if (hsotg->params.uframe_sched)
2706 hsotg->available_host_channels++;
2707 break;
2708 }
2709
2710 /*
2711 * Move the QH from the periodic ready schedule to the
2712 * periodic assigned schedule
2713 */
2714 qh_ptr = qh_ptr->next;
2715 list_move_tail(&qh->qh_list_entry,
2716 &hsotg->periodic_sched_assigned);
2717 ret_val = DWC2_TRANSACTION_PERIODIC;
2718 }
2719
2720 /*
2721 * Process entries in the inactive portion of the non-periodic
2722 * schedule. Some free host channels may not be used if they are
2723 * reserved for periodic transfers.
2724 */
2725 num_channels = hsotg->params.host_channels;
2726 qh_ptr = hsotg->non_periodic_sched_inactive.next;
2727 while (qh_ptr != &hsotg->non_periodic_sched_inactive) {
2728 if (!hsotg->params.uframe_sched &&
2729 hsotg->non_periodic_channels >= num_channels -
2730 hsotg->periodic_channels)
2731 break;
2732 if (list_empty(&hsotg->free_hc_list))
2733 break;
2734 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
2735 if (hsotg->params.uframe_sched) {
2736 if (hsotg->available_host_channels < 1)
2737 break;
2738 hsotg->available_host_channels--;
2739 }
2740
2741 if (dwc2_assign_and_init_hc(hsotg, qh)) {
2742 if (hsotg->params.uframe_sched)
2743 hsotg->available_host_channels++;
2744 break;
2745 }
2746
2747 /*
2748 * Move the QH from the non-periodic inactive schedule to the
2749 * non-periodic active schedule
2750 */
2751 qh_ptr = qh_ptr->next;
2752 list_move_tail(&qh->qh_list_entry,
2753 &hsotg->non_periodic_sched_active);
2754
2755 if (ret_val == DWC2_TRANSACTION_NONE)
2756 ret_val = DWC2_TRANSACTION_NON_PERIODIC;
2757 else
2758 ret_val = DWC2_TRANSACTION_ALL;
2759
2760 if (!hsotg->params.uframe_sched)
2761 hsotg->non_periodic_channels++;
2762 }
2763
2764 return ret_val;
2765 }
2766
2767 /**
2768 * dwc2_queue_transaction() - Attempts to queue a single transaction request for
2769 * a host channel associated with either a periodic or non-periodic transfer
2770 *
2771 * @hsotg: The HCD state structure
2772 * @chan: Host channel descriptor associated with either a periodic or
2773 * non-periodic transfer
2774 * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO
2775 * for periodic transfers or the non-periodic Tx FIFO
2776 * for non-periodic transfers
2777 *
2778 * Return: 1 if a request is queued and more requests may be needed to
2779 * complete the transfer, 0 if no more requests are required for this
2780 * transfer, -1 if there is insufficient space in the Tx FIFO
2781 *
2782 * This function assumes that there is space available in the appropriate
2783 * request queue. For an OUT transfer or SETUP transaction in Slave mode,
2784 * it checks whether space is available in the appropriate Tx FIFO.
2785 *
2786 * Must be called with interrupt disabled and spinlock held
2787 */
dwc2_queue_transaction(struct dwc2_hsotg * hsotg,struct dwc2_host_chan * chan,u16 fifo_dwords_avail)2788 static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg,
2789 struct dwc2_host_chan *chan,
2790 u16 fifo_dwords_avail)
2791 {
2792 int retval = 0;
2793
2794 if (chan->do_split)
2795 /* Put ourselves on the list to keep order straight */
2796 list_move_tail(&chan->split_order_list_entry,
2797 &hsotg->split_order);
2798
2799 if (hsotg->params.host_dma && chan->qh) {
2800 if (hsotg->params.dma_desc_enable) {
2801 if (!chan->xfer_started ||
2802 chan->ep_type == USB_ENDPOINT_XFER_ISOC) {
2803 dwc2_hcd_start_xfer_ddma(hsotg, chan->qh);
2804 chan->qh->ping_state = 0;
2805 }
2806 } else if (!chan->xfer_started) {
2807 dwc2_hc_start_transfer(hsotg, chan);
2808 chan->qh->ping_state = 0;
2809 }
2810 } else if (chan->halt_pending) {
2811 /* Don't queue a request if the channel has been halted */
2812 } else if (chan->halt_on_queue) {
2813 dwc2_hc_halt(hsotg, chan, chan->halt_status);
2814 } else if (chan->do_ping) {
2815 if (!chan->xfer_started)
2816 dwc2_hc_start_transfer(hsotg, chan);
2817 } else if (!chan->ep_is_in ||
2818 chan->data_pid_start == DWC2_HC_PID_SETUP) {
2819 if ((fifo_dwords_avail * 4) >= chan->max_packet) {
2820 if (!chan->xfer_started) {
2821 dwc2_hc_start_transfer(hsotg, chan);
2822 retval = 1;
2823 } else {
2824 retval = dwc2_hc_continue_transfer(hsotg, chan);
2825 }
2826 } else {
2827 retval = -1;
2828 }
2829 } else {
2830 if (!chan->xfer_started) {
2831 dwc2_hc_start_transfer(hsotg, chan);
2832 retval = 1;
2833 } else {
2834 retval = dwc2_hc_continue_transfer(hsotg, chan);
2835 }
2836 }
2837
2838 return retval;
2839 }
2840
2841 /*
2842 * Processes periodic channels for the next frame and queues transactions for
2843 * these channels to the DWC_otg controller. After queueing transactions, the
2844 * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
2845 * to queue as Periodic Tx FIFO or request queue space becomes available.
2846 * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
2847 *
2848 * Must be called with interrupt disabled and spinlock held
2849 */
dwc2_process_periodic_channels(struct dwc2_hsotg * hsotg)2850 static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg)
2851 {
2852 struct list_head *qh_ptr;
2853 struct dwc2_qh *qh;
2854 u32 tx_status;
2855 u32 fspcavail;
2856 u32 gintmsk;
2857 int status;
2858 bool no_queue_space = false;
2859 bool no_fifo_space = false;
2860 u32 qspcavail;
2861
2862 /* If empty list then just adjust interrupt enables */
2863 if (list_empty(&hsotg->periodic_sched_assigned))
2864 goto exit;
2865
2866 if (dbg_perio())
2867 dev_vdbg(hsotg->dev, "Queue periodic transactions\n");
2868
2869 tx_status = dwc2_readl(hsotg, HPTXSTS);
2870 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
2871 TXSTS_QSPCAVAIL_SHIFT;
2872 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
2873 TXSTS_FSPCAVAIL_SHIFT;
2874
2875 if (dbg_perio()) {
2876 dev_vdbg(hsotg->dev, " P Tx Req Queue Space Avail (before queue): %d\n",
2877 qspcavail);
2878 dev_vdbg(hsotg->dev, " P Tx FIFO Space Avail (before queue): %d\n",
2879 fspcavail);
2880 }
2881
2882 qh_ptr = hsotg->periodic_sched_assigned.next;
2883 while (qh_ptr != &hsotg->periodic_sched_assigned) {
2884 tx_status = dwc2_readl(hsotg, HPTXSTS);
2885 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
2886 TXSTS_QSPCAVAIL_SHIFT;
2887 if (qspcavail == 0) {
2888 no_queue_space = true;
2889 break;
2890 }
2891
2892 qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry);
2893 if (!qh->channel) {
2894 qh_ptr = qh_ptr->next;
2895 continue;
2896 }
2897
2898 /* Make sure EP's TT buffer is clean before queueing qtds */
2899 if (qh->tt_buffer_dirty) {
2900 qh_ptr = qh_ptr->next;
2901 continue;
2902 }
2903
2904 /*
2905 * Set a flag if we're queuing high-bandwidth in slave mode.
2906 * The flag prevents any halts to get into the request queue in
2907 * the middle of multiple high-bandwidth packets getting queued.
2908 */
2909 if (!hsotg->params.host_dma &&
2910 qh->channel->multi_count > 1)
2911 hsotg->queuing_high_bandwidth = 1;
2912
2913 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
2914 TXSTS_FSPCAVAIL_SHIFT;
2915 status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail);
2916 if (status < 0) {
2917 no_fifo_space = true;
2918 break;
2919 }
2920
2921 /*
2922 * In Slave mode, stay on the current transfer until there is
2923 * nothing more to do or the high-bandwidth request count is
2924 * reached. In DMA mode, only need to queue one request. The
2925 * controller automatically handles multiple packets for
2926 * high-bandwidth transfers.
2927 */
2928 if (hsotg->params.host_dma || status == 0 ||
2929 qh->channel->requests == qh->channel->multi_count) {
2930 qh_ptr = qh_ptr->next;
2931 /*
2932 * Move the QH from the periodic assigned schedule to
2933 * the periodic queued schedule
2934 */
2935 list_move_tail(&qh->qh_list_entry,
2936 &hsotg->periodic_sched_queued);
2937
2938 /* done queuing high bandwidth */
2939 hsotg->queuing_high_bandwidth = 0;
2940 }
2941 }
2942
2943 exit:
2944 if (no_queue_space || no_fifo_space ||
2945 (!hsotg->params.host_dma &&
2946 !list_empty(&hsotg->periodic_sched_assigned))) {
2947 /*
2948 * May need to queue more transactions as the request
2949 * queue or Tx FIFO empties. Enable the periodic Tx
2950 * FIFO empty interrupt. (Always use the half-empty
2951 * level to ensure that new requests are loaded as
2952 * soon as possible.)
2953 */
2954 gintmsk = dwc2_readl(hsotg, GINTMSK);
2955 if (!(gintmsk & GINTSTS_PTXFEMP)) {
2956 gintmsk |= GINTSTS_PTXFEMP;
2957 dwc2_writel(hsotg, gintmsk, GINTMSK);
2958 }
2959 } else {
2960 /*
2961 * Disable the Tx FIFO empty interrupt since there are
2962 * no more transactions that need to be queued right
2963 * now. This function is called from interrupt
2964 * handlers to queue more transactions as transfer
2965 * states change.
2966 */
2967 gintmsk = dwc2_readl(hsotg, GINTMSK);
2968 if (gintmsk & GINTSTS_PTXFEMP) {
2969 gintmsk &= ~GINTSTS_PTXFEMP;
2970 dwc2_writel(hsotg, gintmsk, GINTMSK);
2971 }
2972 }
2973 }
2974
2975 /*
2976 * Processes active non-periodic channels and queues transactions for these
2977 * channels to the DWC_otg controller. After queueing transactions, the NP Tx
2978 * FIFO Empty interrupt is enabled if there are more transactions to queue as
2979 * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
2980 * FIFO Empty interrupt is disabled.
2981 *
2982 * Must be called with interrupt disabled and spinlock held
2983 */
dwc2_process_non_periodic_channels(struct dwc2_hsotg * hsotg)2984 static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg)
2985 {
2986 struct list_head *orig_qh_ptr;
2987 struct dwc2_qh *qh;
2988 u32 tx_status;
2989 u32 qspcavail;
2990 u32 fspcavail;
2991 u32 gintmsk;
2992 int status;
2993 int no_queue_space = 0;
2994 int no_fifo_space = 0;
2995 int more_to_do = 0;
2996
2997 dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n");
2998
2999 tx_status = dwc2_readl(hsotg, GNPTXSTS);
3000 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
3001 TXSTS_QSPCAVAIL_SHIFT;
3002 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
3003 TXSTS_FSPCAVAIL_SHIFT;
3004 dev_vdbg(hsotg->dev, " NP Tx Req Queue Space Avail (before queue): %d\n",
3005 qspcavail);
3006 dev_vdbg(hsotg->dev, " NP Tx FIFO Space Avail (before queue): %d\n",
3007 fspcavail);
3008
3009 /*
3010 * Keep track of the starting point. Skip over the start-of-list
3011 * entry.
3012 */
3013 if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active)
3014 hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next;
3015 orig_qh_ptr = hsotg->non_periodic_qh_ptr;
3016
3017 /*
3018 * Process once through the active list or until no more space is
3019 * available in the request queue or the Tx FIFO
3020 */
3021 do {
3022 tx_status = dwc2_readl(hsotg, GNPTXSTS);
3023 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
3024 TXSTS_QSPCAVAIL_SHIFT;
3025 if (!hsotg->params.host_dma && qspcavail == 0) {
3026 no_queue_space = 1;
3027 break;
3028 }
3029
3030 qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh,
3031 qh_list_entry);
3032 if (!qh->channel)
3033 goto next;
3034
3035 /* Make sure EP's TT buffer is clean before queueing qtds */
3036 if (qh->tt_buffer_dirty)
3037 goto next;
3038
3039 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
3040 TXSTS_FSPCAVAIL_SHIFT;
3041 status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail);
3042
3043 if (status > 0) {
3044 more_to_do = 1;
3045 } else if (status < 0) {
3046 no_fifo_space = 1;
3047 break;
3048 }
3049 next:
3050 /* Advance to next QH, skipping start-of-list entry */
3051 hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next;
3052 if (hsotg->non_periodic_qh_ptr ==
3053 &hsotg->non_periodic_sched_active)
3054 hsotg->non_periodic_qh_ptr =
3055 hsotg->non_periodic_qh_ptr->next;
3056 } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr);
3057
3058 if (!hsotg->params.host_dma) {
3059 tx_status = dwc2_readl(hsotg, GNPTXSTS);
3060 qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >>
3061 TXSTS_QSPCAVAIL_SHIFT;
3062 fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >>
3063 TXSTS_FSPCAVAIL_SHIFT;
3064 dev_vdbg(hsotg->dev,
3065 " NP Tx Req Queue Space Avail (after queue): %d\n",
3066 qspcavail);
3067 dev_vdbg(hsotg->dev,
3068 " NP Tx FIFO Space Avail (after queue): %d\n",
3069 fspcavail);
3070
3071 if (more_to_do || no_queue_space || no_fifo_space) {
3072 /*
3073 * May need to queue more transactions as the request
3074 * queue or Tx FIFO empties. Enable the non-periodic
3075 * Tx FIFO empty interrupt. (Always use the half-empty
3076 * level to ensure that new requests are loaded as
3077 * soon as possible.)
3078 */
3079 gintmsk = dwc2_readl(hsotg, GINTMSK);
3080 gintmsk |= GINTSTS_NPTXFEMP;
3081 dwc2_writel(hsotg, gintmsk, GINTMSK);
3082 } else {
3083 /*
3084 * Disable the Tx FIFO empty interrupt since there are
3085 * no more transactions that need to be queued right
3086 * now. This function is called from interrupt
3087 * handlers to queue more transactions as transfer
3088 * states change.
3089 */
3090 gintmsk = dwc2_readl(hsotg, GINTMSK);
3091 gintmsk &= ~GINTSTS_NPTXFEMP;
3092 dwc2_writel(hsotg, gintmsk, GINTMSK);
3093 }
3094 }
3095 }
3096
3097 /**
3098 * dwc2_hcd_queue_transactions() - Processes the currently active host channels
3099 * and queues transactions for these channels to the DWC_otg controller. Called
3100 * from the HCD interrupt handler functions.
3101 *
3102 * @hsotg: The HCD state structure
3103 * @tr_type: The type(s) of transactions to queue (non-periodic, periodic,
3104 * or both)
3105 *
3106 * Must be called with interrupt disabled and spinlock held
3107 */
dwc2_hcd_queue_transactions(struct dwc2_hsotg * hsotg,enum dwc2_transaction_type tr_type)3108 void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg,
3109 enum dwc2_transaction_type tr_type)
3110 {
3111 #ifdef DWC2_DEBUG_SOF
3112 dev_vdbg(hsotg->dev, "Queue Transactions\n");
3113 #endif
3114 /* Process host channels associated with periodic transfers */
3115 if (tr_type == DWC2_TRANSACTION_PERIODIC ||
3116 tr_type == DWC2_TRANSACTION_ALL)
3117 dwc2_process_periodic_channels(hsotg);
3118
3119 /* Process host channels associated with non-periodic transfers */
3120 if (tr_type == DWC2_TRANSACTION_NON_PERIODIC ||
3121 tr_type == DWC2_TRANSACTION_ALL) {
3122 if (!list_empty(&hsotg->non_periodic_sched_active)) {
3123 dwc2_process_non_periodic_channels(hsotg);
3124 } else {
3125 /*
3126 * Ensure NP Tx FIFO empty interrupt is disabled when
3127 * there are no non-periodic transfers to process
3128 */
3129 u32 gintmsk = dwc2_readl(hsotg, GINTMSK);
3130
3131 gintmsk &= ~GINTSTS_NPTXFEMP;
3132 dwc2_writel(hsotg, gintmsk, GINTMSK);
3133 }
3134 }
3135 }
3136
dwc2_conn_id_status_change(struct work_struct * work)3137 static void dwc2_conn_id_status_change(struct work_struct *work)
3138 {
3139 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
3140 wf_otg);
3141 u32 count = 0;
3142 u32 gotgctl;
3143 unsigned long flags;
3144
3145 dev_dbg(hsotg->dev, "%s()\n", __func__);
3146
3147 gotgctl = dwc2_readl(hsotg, GOTGCTL);
3148 dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl);
3149 dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n",
3150 !!(gotgctl & GOTGCTL_CONID_B));
3151
3152 /* B-Device connector (Device Mode) */
3153 if (gotgctl & GOTGCTL_CONID_B) {
3154 dwc2_vbus_supply_exit(hsotg);
3155 /* Wait for switch to device mode */
3156 dev_dbg(hsotg->dev, "connId B\n");
3157 if (hsotg->bus_suspended) {
3158 dev_info(hsotg->dev,
3159 "Do port resume before switching to device mode\n");
3160 dwc2_port_resume(hsotg);
3161 }
3162 while (!dwc2_is_device_mode(hsotg)) {
3163 dev_info(hsotg->dev,
3164 "Waiting for Peripheral Mode, Mode=%s\n",
3165 dwc2_is_host_mode(hsotg) ? "Host" :
3166 "Peripheral");
3167 msleep(20);
3168 /*
3169 * Sometimes the initial GOTGCTRL read is wrong, so
3170 * check it again and jump to host mode if that was
3171 * the case.
3172 */
3173 gotgctl = dwc2_readl(hsotg, GOTGCTL);
3174 if (!(gotgctl & GOTGCTL_CONID_B))
3175 goto host;
3176 if (++count > 250)
3177 break;
3178 }
3179 if (count > 250)
3180 dev_err(hsotg->dev,
3181 "Connection id status change timed out\n");
3182
3183 /*
3184 * Exit Partial Power Down without restoring registers.
3185 * No need to check the return value as registers
3186 * are not being restored.
3187 */
3188 if (hsotg->in_ppd && hsotg->lx_state == DWC2_L2)
3189 dwc2_exit_partial_power_down(hsotg, 0, false);
3190
3191 hsotg->op_state = OTG_STATE_B_PERIPHERAL;
3192 dwc2_core_init(hsotg, false);
3193 dwc2_enable_global_interrupts(hsotg);
3194 spin_lock_irqsave(&hsotg->lock, flags);
3195 dwc2_hsotg_core_init_disconnected(hsotg, false);
3196 spin_unlock_irqrestore(&hsotg->lock, flags);
3197 /* Enable ACG feature in device mode,if supported */
3198 dwc2_enable_acg(hsotg);
3199 dwc2_hsotg_core_connect(hsotg);
3200 } else {
3201 host:
3202 /* A-Device connector (Host Mode) */
3203 dev_dbg(hsotg->dev, "connId A\n");
3204 while (!dwc2_is_host_mode(hsotg)) {
3205 dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n",
3206 dwc2_is_host_mode(hsotg) ?
3207 "Host" : "Peripheral");
3208 msleep(20);
3209 if (++count > 250)
3210 break;
3211 }
3212 if (count > 250)
3213 dev_err(hsotg->dev,
3214 "Connection id status change timed out\n");
3215
3216 spin_lock_irqsave(&hsotg->lock, flags);
3217 dwc2_hsotg_disconnect(hsotg);
3218 spin_unlock_irqrestore(&hsotg->lock, flags);
3219
3220 hsotg->op_state = OTG_STATE_A_HOST;
3221 /* Initialize the Core for Host mode */
3222 dwc2_core_init(hsotg, false);
3223 dwc2_enable_global_interrupts(hsotg);
3224 dwc2_hcd_start(hsotg);
3225 }
3226 }
3227
dwc2_wakeup_detected(struct timer_list * t)3228 static void dwc2_wakeup_detected(struct timer_list *t)
3229 {
3230 struct dwc2_hsotg *hsotg = from_timer(hsotg, t, wkp_timer);
3231 u32 hprt0;
3232
3233 dev_dbg(hsotg->dev, "%s()\n", __func__);
3234
3235 /*
3236 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
3237 * so that OPT tests pass with all PHYs.)
3238 */
3239 hprt0 = dwc2_read_hprt0(hsotg);
3240 dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0);
3241 hprt0 &= ~HPRT0_RES;
3242 dwc2_writel(hsotg, hprt0, HPRT0);
3243 dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n",
3244 dwc2_readl(hsotg, HPRT0));
3245
3246 dwc2_hcd_rem_wakeup(hsotg);
3247 hsotg->bus_suspended = false;
3248
3249 /* Change to L0 state */
3250 hsotg->lx_state = DWC2_L0;
3251 }
3252
dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg * hsotg)3253 static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg)
3254 {
3255 struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg);
3256
3257 return hcd->self.b_hnp_enable;
3258 }
3259
3260 /**
3261 * dwc2_port_suspend() - Put controller in suspend mode for host.
3262 *
3263 * @hsotg: Programming view of the DWC_otg controller
3264 * @windex: The control request wIndex field
3265 *
3266 * Return: non-zero if failed to enter suspend mode for host.
3267 *
3268 * This function is for entering Host mode suspend.
3269 * Must NOT be called with interrupt disabled or spinlock held.
3270 */
dwc2_port_suspend(struct dwc2_hsotg * hsotg,u16 windex)3271 int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
3272 {
3273 unsigned long flags;
3274 u32 pcgctl;
3275 u32 gotgctl;
3276 int ret = 0;
3277
3278 dev_dbg(hsotg->dev, "%s()\n", __func__);
3279
3280 spin_lock_irqsave(&hsotg->lock, flags);
3281
3282 if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) {
3283 gotgctl = dwc2_readl(hsotg, GOTGCTL);
3284 gotgctl |= GOTGCTL_HSTSETHNPEN;
3285 dwc2_writel(hsotg, gotgctl, GOTGCTL);
3286 hsotg->op_state = OTG_STATE_A_SUSPEND;
3287 }
3288
3289 switch (hsotg->params.power_down) {
3290 case DWC2_POWER_DOWN_PARAM_PARTIAL:
3291 ret = dwc2_enter_partial_power_down(hsotg);
3292 if (ret)
3293 dev_err(hsotg->dev,
3294 "enter partial_power_down failed.\n");
3295 break;
3296 case DWC2_POWER_DOWN_PARAM_HIBERNATION:
3297 /*
3298 * Perform spin unlock and lock because in
3299 * "dwc2_host_enter_hibernation()" function there is a spinlock
3300 * logic which prevents servicing of any IRQ during entering
3301 * hibernation.
3302 */
3303 spin_unlock_irqrestore(&hsotg->lock, flags);
3304 ret = dwc2_enter_hibernation(hsotg, 1);
3305 if (ret)
3306 dev_err(hsotg->dev, "enter hibernation failed.\n");
3307 spin_lock_irqsave(&hsotg->lock, flags);
3308 break;
3309 case DWC2_POWER_DOWN_PARAM_NONE:
3310 /*
3311 * If not hibernation nor partial power down are supported,
3312 * clock gating is used to save power.
3313 */
3314 if (!hsotg->params.no_clock_gating)
3315 dwc2_host_enter_clock_gating(hsotg);
3316 break;
3317 }
3318
3319 /* For HNP the bus must be suspended for at least 200ms */
3320 if (dwc2_host_is_b_hnp_enabled(hsotg)) {
3321 pcgctl = dwc2_readl(hsotg, PCGCTL);
3322 pcgctl &= ~PCGCTL_STOPPCLK;
3323 dwc2_writel(hsotg, pcgctl, PCGCTL);
3324
3325 spin_unlock_irqrestore(&hsotg->lock, flags);
3326
3327 msleep(200);
3328 } else {
3329 spin_unlock_irqrestore(&hsotg->lock, flags);
3330 }
3331
3332 return ret;
3333 }
3334
3335 /**
3336 * dwc2_port_resume() - Exit controller from suspend mode for host.
3337 *
3338 * @hsotg: Programming view of the DWC_otg controller
3339 *
3340 * Return: non-zero if failed to exit suspend mode for host.
3341 *
3342 * This function is for exiting Host mode suspend.
3343 * Must NOT be called with interrupt disabled or spinlock held.
3344 */
dwc2_port_resume(struct dwc2_hsotg * hsotg)3345 int dwc2_port_resume(struct dwc2_hsotg *hsotg)
3346 {
3347 unsigned long flags;
3348 int ret = 0;
3349
3350 spin_lock_irqsave(&hsotg->lock, flags);
3351
3352 switch (hsotg->params.power_down) {
3353 case DWC2_POWER_DOWN_PARAM_PARTIAL:
3354 ret = dwc2_exit_partial_power_down(hsotg, 0, true);
3355 if (ret)
3356 dev_err(hsotg->dev,
3357 "exit partial_power_down failed.\n");
3358 break;
3359 case DWC2_POWER_DOWN_PARAM_HIBERNATION:
3360 /* Exit host hibernation. */
3361 ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
3362 if (ret)
3363 dev_err(hsotg->dev, "exit hibernation failed.\n");
3364 break;
3365 case DWC2_POWER_DOWN_PARAM_NONE:
3366 /*
3367 * If not hibernation nor partial power down are supported,
3368 * port resume is done using the clock gating programming flow.
3369 */
3370 spin_unlock_irqrestore(&hsotg->lock, flags);
3371 dwc2_host_exit_clock_gating(hsotg, 0);
3372 spin_lock_irqsave(&hsotg->lock, flags);
3373 break;
3374 }
3375
3376 spin_unlock_irqrestore(&hsotg->lock, flags);
3377
3378 return ret;
3379 }
3380
3381 /* Handles hub class-specific requests */
dwc2_hcd_hub_control(struct dwc2_hsotg * hsotg,u16 typereq,u16 wvalue,u16 windex,char * buf,u16 wlength)3382 static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
3383 u16 wvalue, u16 windex, char *buf, u16 wlength)
3384 {
3385 struct usb_hub_descriptor *hub_desc;
3386 int retval = 0;
3387 u32 hprt0;
3388 u32 port_status;
3389 u32 speed;
3390 u32 pcgctl;
3391 u32 pwr;
3392
3393 switch (typereq) {
3394 case ClearHubFeature:
3395 dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue);
3396
3397 switch (wvalue) {
3398 case C_HUB_LOCAL_POWER:
3399 case C_HUB_OVER_CURRENT:
3400 /* Nothing required here */
3401 break;
3402
3403 default:
3404 retval = -EINVAL;
3405 dev_err(hsotg->dev,
3406 "ClearHubFeature request %1xh unknown\n",
3407 wvalue);
3408 }
3409 break;
3410
3411 case ClearPortFeature:
3412 if (wvalue != USB_PORT_FEAT_L1)
3413 if (!windex || windex > 1)
3414 goto error;
3415 switch (wvalue) {
3416 case USB_PORT_FEAT_ENABLE:
3417 dev_dbg(hsotg->dev,
3418 "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
3419 hprt0 = dwc2_read_hprt0(hsotg);
3420 hprt0 |= HPRT0_ENA;
3421 dwc2_writel(hsotg, hprt0, HPRT0);
3422 break;
3423
3424 case USB_PORT_FEAT_SUSPEND:
3425 dev_dbg(hsotg->dev,
3426 "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
3427
3428 if (hsotg->bus_suspended)
3429 retval = dwc2_port_resume(hsotg);
3430 break;
3431
3432 case USB_PORT_FEAT_POWER:
3433 dev_dbg(hsotg->dev,
3434 "ClearPortFeature USB_PORT_FEAT_POWER\n");
3435 hprt0 = dwc2_read_hprt0(hsotg);
3436 pwr = hprt0 & HPRT0_PWR;
3437 hprt0 &= ~HPRT0_PWR;
3438 dwc2_writel(hsotg, hprt0, HPRT0);
3439 if (pwr)
3440 dwc2_vbus_supply_exit(hsotg);
3441 break;
3442
3443 case USB_PORT_FEAT_INDICATOR:
3444 dev_dbg(hsotg->dev,
3445 "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
3446 /* Port indicator not supported */
3447 break;
3448
3449 case USB_PORT_FEAT_C_CONNECTION:
3450 /*
3451 * Clears driver's internal Connect Status Change flag
3452 */
3453 dev_dbg(hsotg->dev,
3454 "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
3455 hsotg->flags.b.port_connect_status_change = 0;
3456 break;
3457
3458 case USB_PORT_FEAT_C_RESET:
3459 /* Clears driver's internal Port Reset Change flag */
3460 dev_dbg(hsotg->dev,
3461 "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
3462 hsotg->flags.b.port_reset_change = 0;
3463 break;
3464
3465 case USB_PORT_FEAT_C_ENABLE:
3466 /*
3467 * Clears the driver's internal Port Enable/Disable
3468 * Change flag
3469 */
3470 dev_dbg(hsotg->dev,
3471 "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
3472 hsotg->flags.b.port_enable_change = 0;
3473 break;
3474
3475 case USB_PORT_FEAT_C_SUSPEND:
3476 /*
3477 * Clears the driver's internal Port Suspend Change
3478 * flag, which is set when resume signaling on the host
3479 * port is complete
3480 */
3481 dev_dbg(hsotg->dev,
3482 "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
3483 hsotg->flags.b.port_suspend_change = 0;
3484 break;
3485
3486 case USB_PORT_FEAT_C_PORT_L1:
3487 dev_dbg(hsotg->dev,
3488 "ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n");
3489 hsotg->flags.b.port_l1_change = 0;
3490 break;
3491
3492 case USB_PORT_FEAT_C_OVER_CURRENT:
3493 dev_dbg(hsotg->dev,
3494 "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
3495 hsotg->flags.b.port_over_current_change = 0;
3496 break;
3497
3498 default:
3499 retval = -EINVAL;
3500 dev_err(hsotg->dev,
3501 "ClearPortFeature request %1xh unknown or unsupported\n",
3502 wvalue);
3503 }
3504 break;
3505
3506 case GetHubDescriptor:
3507 dev_dbg(hsotg->dev, "GetHubDescriptor\n");
3508 hub_desc = (struct usb_hub_descriptor *)buf;
3509 hub_desc->bDescLength = 9;
3510 hub_desc->bDescriptorType = USB_DT_HUB;
3511 hub_desc->bNbrPorts = 1;
3512 hub_desc->wHubCharacteristics =
3513 cpu_to_le16(HUB_CHAR_COMMON_LPSM |
3514 HUB_CHAR_INDV_PORT_OCPM);
3515 hub_desc->bPwrOn2PwrGood = 1;
3516 hub_desc->bHubContrCurrent = 0;
3517 hub_desc->u.hs.DeviceRemovable[0] = 0;
3518 hub_desc->u.hs.DeviceRemovable[1] = 0xff;
3519 break;
3520
3521 case GetHubStatus:
3522 dev_dbg(hsotg->dev, "GetHubStatus\n");
3523 memset(buf, 0, 4);
3524 break;
3525
3526 case GetPortStatus:
3527 dev_vdbg(hsotg->dev,
3528 "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex,
3529 hsotg->flags.d32);
3530 if (!windex || windex > 1)
3531 goto error;
3532
3533 port_status = 0;
3534 if (hsotg->flags.b.port_connect_status_change)
3535 port_status |= USB_PORT_STAT_C_CONNECTION << 16;
3536 if (hsotg->flags.b.port_enable_change)
3537 port_status |= USB_PORT_STAT_C_ENABLE << 16;
3538 if (hsotg->flags.b.port_suspend_change)
3539 port_status |= USB_PORT_STAT_C_SUSPEND << 16;
3540 if (hsotg->flags.b.port_l1_change)
3541 port_status |= USB_PORT_STAT_C_L1 << 16;
3542 if (hsotg->flags.b.port_reset_change)
3543 port_status |= USB_PORT_STAT_C_RESET << 16;
3544 if (hsotg->flags.b.port_over_current_change) {
3545 dev_warn(hsotg->dev, "Overcurrent change detected\n");
3546 port_status |= USB_PORT_STAT_C_OVERCURRENT << 16;
3547 }
3548
3549 if (dwc2_is_device_mode(hsotg)) {
3550 /*
3551 * Just return 0's for the remainder of the port status
3552 * since the port register can't be read if the core
3553 * is in device mode.
3554 */
3555 *(__le32 *)buf = cpu_to_le32(port_status);
3556 break;
3557 }
3558
3559 hprt0 = dwc2_readl(hsotg, HPRT0);
3560 dev_vdbg(hsotg->dev, " HPRT0: 0x%08x\n", hprt0);
3561
3562 if (hprt0 & HPRT0_CONNSTS)
3563 port_status |= USB_PORT_STAT_CONNECTION;
3564 if (hprt0 & HPRT0_ENA)
3565 port_status |= USB_PORT_STAT_ENABLE;
3566 if (hprt0 & HPRT0_SUSP)
3567 port_status |= USB_PORT_STAT_SUSPEND;
3568 if (hprt0 & HPRT0_OVRCURRACT)
3569 port_status |= USB_PORT_STAT_OVERCURRENT;
3570 if (hprt0 & HPRT0_RST)
3571 port_status |= USB_PORT_STAT_RESET;
3572 if (hprt0 & HPRT0_PWR)
3573 port_status |= USB_PORT_STAT_POWER;
3574
3575 speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
3576 if (speed == HPRT0_SPD_HIGH_SPEED)
3577 port_status |= USB_PORT_STAT_HIGH_SPEED;
3578 else if (speed == HPRT0_SPD_LOW_SPEED)
3579 port_status |= USB_PORT_STAT_LOW_SPEED;
3580
3581 if (hprt0 & HPRT0_TSTCTL_MASK)
3582 port_status |= USB_PORT_STAT_TEST;
3583 /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
3584
3585 if (hsotg->params.dma_desc_fs_enable) {
3586 /*
3587 * Enable descriptor DMA only if a full speed
3588 * device is connected.
3589 */
3590 if (hsotg->new_connection &&
3591 ((port_status &
3592 (USB_PORT_STAT_CONNECTION |
3593 USB_PORT_STAT_HIGH_SPEED |
3594 USB_PORT_STAT_LOW_SPEED)) ==
3595 USB_PORT_STAT_CONNECTION)) {
3596 u32 hcfg;
3597
3598 dev_info(hsotg->dev, "Enabling descriptor DMA mode\n");
3599 hsotg->params.dma_desc_enable = true;
3600 hcfg = dwc2_readl(hsotg, HCFG);
3601 hcfg |= HCFG_DESCDMA;
3602 dwc2_writel(hsotg, hcfg, HCFG);
3603 hsotg->new_connection = false;
3604 }
3605 }
3606
3607 dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status);
3608 *(__le32 *)buf = cpu_to_le32(port_status);
3609 break;
3610
3611 case SetHubFeature:
3612 dev_dbg(hsotg->dev, "SetHubFeature\n");
3613 /* No HUB features supported */
3614 break;
3615
3616 case SetPortFeature:
3617 dev_dbg(hsotg->dev, "SetPortFeature\n");
3618 if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1))
3619 goto error;
3620
3621 if (dwc2_is_device_mode(hsotg)) {
3622 /*
3623 * Just return 0's for the remainder of the port status
3624 * since the port register can't be read if the core
3625 * is in device mode.
3626 */
3627 break;
3628 }
3629
3630 switch (wvalue) {
3631 case USB_PORT_FEAT_SUSPEND:
3632 dev_dbg(hsotg->dev,
3633 "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
3634 if (windex != hsotg->otg_port)
3635 goto error;
3636 if (!hsotg->bus_suspended)
3637 retval = dwc2_port_suspend(hsotg, windex);
3638 break;
3639
3640 case USB_PORT_FEAT_POWER:
3641 dev_dbg(hsotg->dev,
3642 "SetPortFeature - USB_PORT_FEAT_POWER\n");
3643 hprt0 = dwc2_read_hprt0(hsotg);
3644 pwr = hprt0 & HPRT0_PWR;
3645 hprt0 |= HPRT0_PWR;
3646 dwc2_writel(hsotg, hprt0, HPRT0);
3647 if (!pwr)
3648 dwc2_vbus_supply_init(hsotg);
3649 break;
3650
3651 case USB_PORT_FEAT_RESET:
3652 dev_dbg(hsotg->dev,
3653 "SetPortFeature - USB_PORT_FEAT_RESET\n");
3654
3655 hprt0 = dwc2_read_hprt0(hsotg);
3656
3657 if (hsotg->hibernated) {
3658 retval = dwc2_exit_hibernation(hsotg, 0, 1, 1);
3659 if (retval)
3660 dev_err(hsotg->dev,
3661 "exit hibernation failed\n");
3662 }
3663
3664 if (hsotg->in_ppd) {
3665 retval = dwc2_exit_partial_power_down(hsotg, 1,
3666 true);
3667 if (retval)
3668 dev_err(hsotg->dev,
3669 "exit partial_power_down failed\n");
3670 }
3671
3672 if (hsotg->params.power_down ==
3673 DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
3674 dwc2_host_exit_clock_gating(hsotg, 0);
3675
3676 pcgctl = dwc2_readl(hsotg, PCGCTL);
3677 pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK);
3678 dwc2_writel(hsotg, pcgctl, PCGCTL);
3679 /* ??? Original driver does this */
3680 dwc2_writel(hsotg, 0, PCGCTL);
3681
3682 hprt0 = dwc2_read_hprt0(hsotg);
3683 pwr = hprt0 & HPRT0_PWR;
3684 /* Clear suspend bit if resetting from suspend state */
3685 hprt0 &= ~HPRT0_SUSP;
3686
3687 /*
3688 * When B-Host the Port reset bit is set in the Start
3689 * HCD Callback function, so that the reset is started
3690 * within 1ms of the HNP success interrupt
3691 */
3692 if (!dwc2_hcd_is_b_host(hsotg)) {
3693 hprt0 |= HPRT0_PWR | HPRT0_RST;
3694 dev_dbg(hsotg->dev,
3695 "In host mode, hprt0=%08x\n", hprt0);
3696 dwc2_writel(hsotg, hprt0, HPRT0);
3697 if (!pwr)
3698 dwc2_vbus_supply_init(hsotg);
3699 }
3700
3701 /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
3702 msleep(50);
3703 hprt0 &= ~HPRT0_RST;
3704 dwc2_writel(hsotg, hprt0, HPRT0);
3705 hsotg->lx_state = DWC2_L0; /* Now back to On state */
3706 break;
3707
3708 case USB_PORT_FEAT_INDICATOR:
3709 dev_dbg(hsotg->dev,
3710 "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
3711 /* Not supported */
3712 break;
3713
3714 case USB_PORT_FEAT_TEST:
3715 hprt0 = dwc2_read_hprt0(hsotg);
3716 dev_dbg(hsotg->dev,
3717 "SetPortFeature - USB_PORT_FEAT_TEST\n");
3718 hprt0 &= ~HPRT0_TSTCTL_MASK;
3719 hprt0 |= (windex >> 8) << HPRT0_TSTCTL_SHIFT;
3720 dwc2_writel(hsotg, hprt0, HPRT0);
3721 break;
3722
3723 default:
3724 retval = -EINVAL;
3725 dev_err(hsotg->dev,
3726 "SetPortFeature %1xh unknown or unsupported\n",
3727 wvalue);
3728 break;
3729 }
3730 break;
3731
3732 default:
3733 error:
3734 retval = -EINVAL;
3735 dev_dbg(hsotg->dev,
3736 "Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n",
3737 typereq, windex, wvalue);
3738 break;
3739 }
3740
3741 return retval;
3742 }
3743
dwc2_hcd_is_status_changed(struct dwc2_hsotg * hsotg,int port)3744 static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port)
3745 {
3746 int retval;
3747
3748 if (port != 1)
3749 return -EINVAL;
3750
3751 retval = (hsotg->flags.b.port_connect_status_change ||
3752 hsotg->flags.b.port_reset_change ||
3753 hsotg->flags.b.port_enable_change ||
3754 hsotg->flags.b.port_suspend_change ||
3755 hsotg->flags.b.port_over_current_change);
3756
3757 if (retval) {
3758 dev_dbg(hsotg->dev,
3759 "DWC OTG HCD HUB STATUS DATA: Root port status changed\n");
3760 dev_dbg(hsotg->dev, " port_connect_status_change: %d\n",
3761 hsotg->flags.b.port_connect_status_change);
3762 dev_dbg(hsotg->dev, " port_reset_change: %d\n",
3763 hsotg->flags.b.port_reset_change);
3764 dev_dbg(hsotg->dev, " port_enable_change: %d\n",
3765 hsotg->flags.b.port_enable_change);
3766 dev_dbg(hsotg->dev, " port_suspend_change: %d\n",
3767 hsotg->flags.b.port_suspend_change);
3768 dev_dbg(hsotg->dev, " port_over_current_change: %d\n",
3769 hsotg->flags.b.port_over_current_change);
3770 }
3771
3772 return retval;
3773 }
3774
dwc2_hcd_get_frame_number(struct dwc2_hsotg * hsotg)3775 int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
3776 {
3777 u32 hfnum = dwc2_readl(hsotg, HFNUM);
3778
3779 #ifdef DWC2_DEBUG_SOF
3780 dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n",
3781 (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT);
3782 #endif
3783 return (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
3784 }
3785
dwc2_hcd_get_future_frame_number(struct dwc2_hsotg * hsotg,int us)3786 int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us)
3787 {
3788 u32 hprt = dwc2_readl(hsotg, HPRT0);
3789 u32 hfir = dwc2_readl(hsotg, HFIR);
3790 u32 hfnum = dwc2_readl(hsotg, HFNUM);
3791 unsigned int us_per_frame;
3792 unsigned int frame_number;
3793 unsigned int remaining;
3794 unsigned int interval;
3795 unsigned int phy_clks;
3796
3797 /* High speed has 125 us per (micro) frame; others are 1 ms per */
3798 us_per_frame = (hprt & HPRT0_SPD_MASK) ? 1000 : 125;
3799
3800 /* Extract fields */
3801 frame_number = (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
3802 remaining = (hfnum & HFNUM_FRREM_MASK) >> HFNUM_FRREM_SHIFT;
3803 interval = (hfir & HFIR_FRINT_MASK) >> HFIR_FRINT_SHIFT;
3804
3805 /*
3806 * Number of phy clocks since the last tick of the frame number after
3807 * "us" has passed.
3808 */
3809 phy_clks = (interval - remaining) +
3810 DIV_ROUND_UP(interval * us, us_per_frame);
3811
3812 return dwc2_frame_num_inc(frame_number, phy_clks / interval);
3813 }
3814
dwc2_hcd_is_b_host(struct dwc2_hsotg * hsotg)3815 int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg)
3816 {
3817 return hsotg->op_state == OTG_STATE_B_HOST;
3818 }
3819
dwc2_hcd_urb_alloc(struct dwc2_hsotg * hsotg,int iso_desc_count,gfp_t mem_flags)3820 static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg,
3821 int iso_desc_count,
3822 gfp_t mem_flags)
3823 {
3824 struct dwc2_hcd_urb *urb;
3825
3826 urb = kzalloc(struct_size(urb, iso_descs, iso_desc_count), mem_flags);
3827 if (urb)
3828 urb->packet_count = iso_desc_count;
3829 return urb;
3830 }
3831
dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg * hsotg,struct dwc2_hcd_urb * urb,u8 dev_addr,u8 ep_num,u8 ep_type,u8 ep_dir,u16 maxp,u16 maxp_mult)3832 static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg,
3833 struct dwc2_hcd_urb *urb, u8 dev_addr,
3834 u8 ep_num, u8 ep_type, u8 ep_dir,
3835 u16 maxp, u16 maxp_mult)
3836 {
3837 if (dbg_perio() ||
3838 ep_type == USB_ENDPOINT_XFER_BULK ||
3839 ep_type == USB_ENDPOINT_XFER_CONTROL)
3840 dev_vdbg(hsotg->dev,
3841 "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n",
3842 dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult);
3843 urb->pipe_info.dev_addr = dev_addr;
3844 urb->pipe_info.ep_num = ep_num;
3845 urb->pipe_info.pipe_type = ep_type;
3846 urb->pipe_info.pipe_dir = ep_dir;
3847 urb->pipe_info.maxp = maxp;
3848 urb->pipe_info.maxp_mult = maxp_mult;
3849 }
3850
3851 /*
3852 * NOTE: This function will be removed once the peripheral controller code
3853 * is integrated and the driver is stable
3854 */
dwc2_hcd_dump_state(struct dwc2_hsotg * hsotg)3855 void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg)
3856 {
3857 #ifdef DEBUG
3858 struct dwc2_host_chan *chan;
3859 struct dwc2_hcd_urb *urb;
3860 struct dwc2_qtd *qtd;
3861 int num_channels;
3862 u32 np_tx_status;
3863 u32 p_tx_status;
3864 int i;
3865
3866 num_channels = hsotg->params.host_channels;
3867 dev_dbg(hsotg->dev, "\n");
3868 dev_dbg(hsotg->dev,
3869 "************************************************************\n");
3870 dev_dbg(hsotg->dev, "HCD State:\n");
3871 dev_dbg(hsotg->dev, " Num channels: %d\n", num_channels);
3872
3873 for (i = 0; i < num_channels; i++) {
3874 chan = hsotg->hc_ptr_array[i];
3875 dev_dbg(hsotg->dev, " Channel %d:\n", i);
3876 dev_dbg(hsotg->dev,
3877 " dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
3878 chan->dev_addr, chan->ep_num, chan->ep_is_in);
3879 dev_dbg(hsotg->dev, " speed: %d\n", chan->speed);
3880 dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type);
3881 dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet);
3882 dev_dbg(hsotg->dev, " data_pid_start: %d\n",
3883 chan->data_pid_start);
3884 dev_dbg(hsotg->dev, " multi_count: %d\n", chan->multi_count);
3885 dev_dbg(hsotg->dev, " xfer_started: %d\n",
3886 chan->xfer_started);
3887 dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf);
3888 dev_dbg(hsotg->dev, " xfer_dma: %08lx\n",
3889 (unsigned long)chan->xfer_dma);
3890 dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len);
3891 dev_dbg(hsotg->dev, " xfer_count: %d\n", chan->xfer_count);
3892 dev_dbg(hsotg->dev, " halt_on_queue: %d\n",
3893 chan->halt_on_queue);
3894 dev_dbg(hsotg->dev, " halt_pending: %d\n",
3895 chan->halt_pending);
3896 dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status);
3897 dev_dbg(hsotg->dev, " do_split: %d\n", chan->do_split);
3898 dev_dbg(hsotg->dev, " complete_split: %d\n",
3899 chan->complete_split);
3900 dev_dbg(hsotg->dev, " hub_addr: %d\n", chan->hub_addr);
3901 dev_dbg(hsotg->dev, " hub_port: %d\n", chan->hub_port);
3902 dev_dbg(hsotg->dev, " xact_pos: %d\n", chan->xact_pos);
3903 dev_dbg(hsotg->dev, " requests: %d\n", chan->requests);
3904 dev_dbg(hsotg->dev, " qh: %p\n", chan->qh);
3905
3906 if (chan->xfer_started) {
3907 u32 hfnum, hcchar, hctsiz, hcint, hcintmsk;
3908
3909 hfnum = dwc2_readl(hsotg, HFNUM);
3910 hcchar = dwc2_readl(hsotg, HCCHAR(i));
3911 hctsiz = dwc2_readl(hsotg, HCTSIZ(i));
3912 hcint = dwc2_readl(hsotg, HCINT(i));
3913 hcintmsk = dwc2_readl(hsotg, HCINTMSK(i));
3914 dev_dbg(hsotg->dev, " hfnum: 0x%08x\n", hfnum);
3915 dev_dbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar);
3916 dev_dbg(hsotg->dev, " hctsiz: 0x%08x\n", hctsiz);
3917 dev_dbg(hsotg->dev, " hcint: 0x%08x\n", hcint);
3918 dev_dbg(hsotg->dev, " hcintmsk: 0x%08x\n", hcintmsk);
3919 }
3920
3921 if (!(chan->xfer_started && chan->qh))
3922 continue;
3923
3924 list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) {
3925 if (!qtd->in_process)
3926 break;
3927 urb = qtd->urb;
3928 dev_dbg(hsotg->dev, " URB Info:\n");
3929 dev_dbg(hsotg->dev, " qtd: %p, urb: %p\n",
3930 qtd, urb);
3931 if (urb) {
3932 dev_dbg(hsotg->dev,
3933 " Dev: %d, EP: %d %s\n",
3934 dwc2_hcd_get_dev_addr(&urb->pipe_info),
3935 dwc2_hcd_get_ep_num(&urb->pipe_info),
3936 dwc2_hcd_is_pipe_in(&urb->pipe_info) ?
3937 "IN" : "OUT");
3938 dev_dbg(hsotg->dev,
3939 " Max packet size: %d (%d mult)\n",
3940 dwc2_hcd_get_maxp(&urb->pipe_info),
3941 dwc2_hcd_get_maxp_mult(&urb->pipe_info));
3942 dev_dbg(hsotg->dev,
3943 " transfer_buffer: %p\n",
3944 urb->buf);
3945 dev_dbg(hsotg->dev,
3946 " transfer_dma: %08lx\n",
3947 (unsigned long)urb->dma);
3948 dev_dbg(hsotg->dev,
3949 " transfer_buffer_length: %d\n",
3950 urb->length);
3951 dev_dbg(hsotg->dev, " actual_length: %d\n",
3952 urb->actual_length);
3953 }
3954 }
3955 }
3956
3957 dev_dbg(hsotg->dev, " non_periodic_channels: %d\n",
3958 hsotg->non_periodic_channels);
3959 dev_dbg(hsotg->dev, " periodic_channels: %d\n",
3960 hsotg->periodic_channels);
3961 dev_dbg(hsotg->dev, " periodic_usecs: %d\n", hsotg->periodic_usecs);
3962 np_tx_status = dwc2_readl(hsotg, GNPTXSTS);
3963 dev_dbg(hsotg->dev, " NP Tx Req Queue Space Avail: %d\n",
3964 (np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT);
3965 dev_dbg(hsotg->dev, " NP Tx FIFO Space Avail: %d\n",
3966 (np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT);
3967 p_tx_status = dwc2_readl(hsotg, HPTXSTS);
3968 dev_dbg(hsotg->dev, " P Tx Req Queue Space Avail: %d\n",
3969 (p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT);
3970 dev_dbg(hsotg->dev, " P Tx FIFO Space Avail: %d\n",
3971 (p_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT);
3972 dwc2_dump_global_registers(hsotg);
3973 dwc2_dump_host_registers(hsotg);
3974 dev_dbg(hsotg->dev,
3975 "************************************************************\n");
3976 dev_dbg(hsotg->dev, "\n");
3977 #endif
3978 }
3979
3980 struct wrapper_priv_data {
3981 struct dwc2_hsotg *hsotg;
3982 };
3983
3984 /* Gets the dwc2_hsotg from a usb_hcd */
dwc2_hcd_to_hsotg(struct usb_hcd * hcd)3985 static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd)
3986 {
3987 struct wrapper_priv_data *p;
3988
3989 p = (struct wrapper_priv_data *)&hcd->hcd_priv;
3990 return p->hsotg;
3991 }
3992
3993 /**
3994 * dwc2_host_get_tt_info() - Get the dwc2_tt associated with context
3995 *
3996 * This will get the dwc2_tt structure (and ttport) associated with the given
3997 * context (which is really just a struct urb pointer).
3998 *
3999 * The first time this is called for a given TT we allocate memory for our
4000 * structure. When everyone is done and has called dwc2_host_put_tt_info()
4001 * then the refcount for the structure will go to 0 and we'll free it.
4002 *
4003 * @hsotg: The HCD state structure for the DWC OTG controller.
4004 * @context: The priv pointer from a struct dwc2_hcd_urb.
4005 * @mem_flags: Flags for allocating memory.
4006 * @ttport: We'll return this device's port number here. That's used to
4007 * reference into the bitmap if we're on a multi_tt hub.
4008 *
4009 * Return: a pointer to a struct dwc2_tt. Don't forget to call
4010 * dwc2_host_put_tt_info()! Returns NULL upon memory alloc failure.
4011 */
4012
dwc2_host_get_tt_info(struct dwc2_hsotg * hsotg,void * context,gfp_t mem_flags,int * ttport)4013 struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg, void *context,
4014 gfp_t mem_flags, int *ttport)
4015 {
4016 struct urb *urb = context;
4017 struct dwc2_tt *dwc_tt = NULL;
4018
4019 if (urb->dev->tt) {
4020 *ttport = urb->dev->ttport;
4021
4022 dwc_tt = urb->dev->tt->hcpriv;
4023 if (!dwc_tt) {
4024 size_t bitmap_size;
4025
4026 /*
4027 * For single_tt we need one schedule. For multi_tt
4028 * we need one per port.
4029 */
4030 bitmap_size = DWC2_ELEMENTS_PER_LS_BITMAP *
4031 sizeof(dwc_tt->periodic_bitmaps[0]);
4032 if (urb->dev->tt->multi)
4033 bitmap_size *= urb->dev->tt->hub->maxchild;
4034
4035 dwc_tt = kzalloc(sizeof(*dwc_tt) + bitmap_size,
4036 mem_flags);
4037 if (!dwc_tt)
4038 return NULL;
4039
4040 dwc_tt->usb_tt = urb->dev->tt;
4041 dwc_tt->usb_tt->hcpriv = dwc_tt;
4042 }
4043
4044 dwc_tt->refcount++;
4045 }
4046
4047 return dwc_tt;
4048 }
4049
4050 /**
4051 * dwc2_host_put_tt_info() - Put the dwc2_tt from dwc2_host_get_tt_info()
4052 *
4053 * Frees resources allocated by dwc2_host_get_tt_info() if all current holders
4054 * of the structure are done.
4055 *
4056 * It's OK to call this with NULL.
4057 *
4058 * @hsotg: The HCD state structure for the DWC OTG controller.
4059 * @dwc_tt: The pointer returned by dwc2_host_get_tt_info.
4060 */
dwc2_host_put_tt_info(struct dwc2_hsotg * hsotg,struct dwc2_tt * dwc_tt)4061 void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg, struct dwc2_tt *dwc_tt)
4062 {
4063 /* Model kfree and make put of NULL a no-op */
4064 if (!dwc_tt)
4065 return;
4066
4067 WARN_ON(dwc_tt->refcount < 1);
4068
4069 dwc_tt->refcount--;
4070 if (!dwc_tt->refcount) {
4071 dwc_tt->usb_tt->hcpriv = NULL;
4072 kfree(dwc_tt);
4073 }
4074 }
4075
dwc2_host_get_speed(struct dwc2_hsotg * hsotg,void * context)4076 int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context)
4077 {
4078 struct urb *urb = context;
4079
4080 return urb->dev->speed;
4081 }
4082
dwc2_allocate_bus_bandwidth(struct usb_hcd * hcd,u16 bw,struct urb * urb)4083 static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw,
4084 struct urb *urb)
4085 {
4086 struct usb_bus *bus = hcd_to_bus(hcd);
4087
4088 if (urb->interval)
4089 bus->bandwidth_allocated += bw / urb->interval;
4090 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
4091 bus->bandwidth_isoc_reqs++;
4092 else
4093 bus->bandwidth_int_reqs++;
4094 }
4095
dwc2_free_bus_bandwidth(struct usb_hcd * hcd,u16 bw,struct urb * urb)4096 static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw,
4097 struct urb *urb)
4098 {
4099 struct usb_bus *bus = hcd_to_bus(hcd);
4100
4101 if (urb->interval)
4102 bus->bandwidth_allocated -= bw / urb->interval;
4103 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
4104 bus->bandwidth_isoc_reqs--;
4105 else
4106 bus->bandwidth_int_reqs--;
4107 }
4108
4109 /*
4110 * Sets the final status of an URB and returns it to the upper layer. Any
4111 * required cleanup of the URB is performed.
4112 *
4113 * Must be called with interrupt disabled and spinlock held
4114 */
dwc2_host_complete(struct dwc2_hsotg * hsotg,struct dwc2_qtd * qtd,int status)4115 void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
4116 int status)
4117 {
4118 struct urb *urb;
4119 int i;
4120
4121 if (!qtd) {
4122 dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__);
4123 return;
4124 }
4125
4126 if (!qtd->urb) {
4127 dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__);
4128 return;
4129 }
4130
4131 urb = qtd->urb->priv;
4132 if (!urb) {
4133 dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__);
4134 return;
4135 }
4136
4137 urb->actual_length = dwc2_hcd_urb_get_actual_length(qtd->urb);
4138
4139 if (dbg_urb(urb))
4140 dev_vdbg(hsotg->dev,
4141 "%s: urb %p device %d ep %d-%s status %d actual %d\n",
4142 __func__, urb, usb_pipedevice(urb->pipe),
4143 usb_pipeendpoint(urb->pipe),
4144 usb_pipein(urb->pipe) ? "IN" : "OUT", status,
4145 urb->actual_length);
4146
4147 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
4148 if (!hsotg->params.dma_desc_enable)
4149 urb->start_frame = qtd->qh->start_active_frame;
4150 urb->error_count = dwc2_hcd_urb_get_error_count(qtd->urb);
4151 for (i = 0; i < urb->number_of_packets; ++i) {
4152 urb->iso_frame_desc[i].actual_length =
4153 dwc2_hcd_urb_get_iso_desc_actual_length(
4154 qtd->urb, i);
4155 urb->iso_frame_desc[i].status =
4156 dwc2_hcd_urb_get_iso_desc_status(qtd->urb, i);
4157 }
4158 }
4159
4160 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS && dbg_perio()) {
4161 for (i = 0; i < urb->number_of_packets; i++)
4162 dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n",
4163 i, urb->iso_frame_desc[i].status);
4164 }
4165
4166 urb->status = status;
4167 if (!status) {
4168 if ((urb->transfer_flags & URB_SHORT_NOT_OK) &&
4169 urb->actual_length < urb->transfer_buffer_length)
4170 urb->status = -EREMOTEIO;
4171 }
4172
4173 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS ||
4174 usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
4175 struct usb_host_endpoint *ep = urb->ep;
4176
4177 if (ep)
4178 dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg),
4179 dwc2_hcd_get_ep_bandwidth(hsotg, ep),
4180 urb);
4181 }
4182
4183 usb_hcd_unlink_urb_from_ep(dwc2_hsotg_to_hcd(hsotg), urb);
4184 urb->hcpriv = NULL;
4185 kfree(qtd->urb);
4186 qtd->urb = NULL;
4187
4188 usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status);
4189 }
4190
4191 /*
4192 * Work queue function for starting the HCD when A-Cable is connected
4193 */
dwc2_hcd_start_func(struct work_struct * work)4194 static void dwc2_hcd_start_func(struct work_struct *work)
4195 {
4196 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
4197 start_work.work);
4198
4199 dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg);
4200 dwc2_host_start(hsotg);
4201 }
4202
4203 /*
4204 * Reset work queue function
4205 */
dwc2_hcd_reset_func(struct work_struct * work)4206 static void dwc2_hcd_reset_func(struct work_struct *work)
4207 {
4208 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
4209 reset_work.work);
4210 unsigned long flags;
4211 u32 hprt0;
4212
4213 dev_dbg(hsotg->dev, "USB RESET function called\n");
4214
4215 spin_lock_irqsave(&hsotg->lock, flags);
4216
4217 hprt0 = dwc2_read_hprt0(hsotg);
4218 hprt0 &= ~HPRT0_RST;
4219 dwc2_writel(hsotg, hprt0, HPRT0);
4220 hsotg->flags.b.port_reset_change = 1;
4221
4222 spin_unlock_irqrestore(&hsotg->lock, flags);
4223 }
4224
dwc2_hcd_phy_reset_func(struct work_struct * work)4225 static void dwc2_hcd_phy_reset_func(struct work_struct *work)
4226 {
4227 struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
4228 phy_reset_work);
4229 int ret;
4230
4231 ret = phy_reset(hsotg->phy);
4232 if (ret)
4233 dev_warn(hsotg->dev, "PHY reset failed\n");
4234 }
4235
4236 /*
4237 * =========================================================================
4238 * Linux HC Driver Functions
4239 * =========================================================================
4240 */
4241
4242 /*
4243 * Initializes the DWC_otg controller and its root hub and prepares it for host
4244 * mode operation. Activates the root port. Returns 0 on success and a negative
4245 * error code on failure.
4246 */
_dwc2_hcd_start(struct usb_hcd * hcd)4247 static int _dwc2_hcd_start(struct usb_hcd *hcd)
4248 {
4249 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4250 struct usb_bus *bus = hcd_to_bus(hcd);
4251 unsigned long flags;
4252 u32 hprt0;
4253 int ret;
4254
4255 dev_dbg(hsotg->dev, "DWC OTG HCD START\n");
4256
4257 spin_lock_irqsave(&hsotg->lock, flags);
4258 hsotg->lx_state = DWC2_L0;
4259 hcd->state = HC_STATE_RUNNING;
4260 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4261
4262 if (dwc2_is_device_mode(hsotg)) {
4263 spin_unlock_irqrestore(&hsotg->lock, flags);
4264 return 0; /* why 0 ?? */
4265 }
4266
4267 dwc2_hcd_reinit(hsotg);
4268
4269 hprt0 = dwc2_read_hprt0(hsotg);
4270 /* Has vbus power been turned on in dwc2_core_host_init ? */
4271 if (hprt0 & HPRT0_PWR) {
4272 /* Enable external vbus supply before resuming root hub */
4273 spin_unlock_irqrestore(&hsotg->lock, flags);
4274 ret = dwc2_vbus_supply_init(hsotg);
4275 if (ret)
4276 return ret;
4277 spin_lock_irqsave(&hsotg->lock, flags);
4278 }
4279
4280 /* Initialize and connect root hub if one is not already attached */
4281 if (bus->root_hub) {
4282 dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n");
4283 /* Inform the HUB driver to resume */
4284 usb_hcd_resume_root_hub(hcd);
4285 }
4286
4287 spin_unlock_irqrestore(&hsotg->lock, flags);
4288
4289 return 0;
4290 }
4291
4292 /*
4293 * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
4294 * stopped.
4295 */
_dwc2_hcd_stop(struct usb_hcd * hcd)4296 static void _dwc2_hcd_stop(struct usb_hcd *hcd)
4297 {
4298 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4299 unsigned long flags;
4300 u32 hprt0;
4301
4302 /* Turn off all host-specific interrupts */
4303 dwc2_disable_host_interrupts(hsotg);
4304
4305 /* Wait for interrupt processing to finish */
4306 synchronize_irq(hcd->irq);
4307
4308 spin_lock_irqsave(&hsotg->lock, flags);
4309 hprt0 = dwc2_read_hprt0(hsotg);
4310 /* Ensure hcd is disconnected */
4311 dwc2_hcd_disconnect(hsotg, true);
4312 dwc2_hcd_stop(hsotg);
4313 hsotg->lx_state = DWC2_L3;
4314 hcd->state = HC_STATE_HALT;
4315 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4316 spin_unlock_irqrestore(&hsotg->lock, flags);
4317
4318 /* keep balanced supply init/exit by checking HPRT0_PWR */
4319 if (hprt0 & HPRT0_PWR)
4320 dwc2_vbus_supply_exit(hsotg);
4321
4322 usleep_range(1000, 3000);
4323 }
4324
_dwc2_hcd_suspend(struct usb_hcd * hcd)4325 static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
4326 {
4327 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4328 unsigned long flags;
4329 int ret = 0;
4330
4331 spin_lock_irqsave(&hsotg->lock, flags);
4332
4333 if (dwc2_is_device_mode(hsotg))
4334 goto unlock;
4335
4336 if (hsotg->lx_state != DWC2_L0)
4337 goto unlock;
4338
4339 if (!HCD_HW_ACCESSIBLE(hcd))
4340 goto unlock;
4341
4342 if (hsotg->op_state == OTG_STATE_B_PERIPHERAL)
4343 goto unlock;
4344
4345 if (hsotg->bus_suspended)
4346 goto skip_power_saving;
4347
4348 if (!(dwc2_read_hprt0(hsotg) & HPRT0_CONNSTS))
4349 goto skip_power_saving;
4350
4351 switch (hsotg->params.power_down) {
4352 case DWC2_POWER_DOWN_PARAM_PARTIAL:
4353 /* Enter partial_power_down */
4354 ret = dwc2_enter_partial_power_down(hsotg);
4355 if (ret)
4356 dev_err(hsotg->dev,
4357 "enter partial_power_down failed\n");
4358 /* After entering suspend, hardware is not accessible */
4359 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4360 break;
4361 case DWC2_POWER_DOWN_PARAM_HIBERNATION:
4362 /* Enter hibernation */
4363 spin_unlock_irqrestore(&hsotg->lock, flags);
4364 ret = dwc2_enter_hibernation(hsotg, 1);
4365 if (ret)
4366 dev_err(hsotg->dev, "enter hibernation failed\n");
4367 spin_lock_irqsave(&hsotg->lock, flags);
4368
4369 /* After entering suspend, hardware is not accessible */
4370 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4371 break;
4372 case DWC2_POWER_DOWN_PARAM_NONE:
4373 /*
4374 * If not hibernation nor partial power down are supported,
4375 * clock gating is used to save power.
4376 */
4377 if (!hsotg->params.no_clock_gating) {
4378 dwc2_host_enter_clock_gating(hsotg);
4379
4380 /* After entering suspend, hardware is not accessible */
4381 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4382 }
4383 break;
4384 default:
4385 goto skip_power_saving;
4386 }
4387
4388 spin_unlock_irqrestore(&hsotg->lock, flags);
4389 dwc2_vbus_supply_exit(hsotg);
4390 spin_lock_irqsave(&hsotg->lock, flags);
4391
4392 /* Ask phy to be suspended */
4393 if (!IS_ERR_OR_NULL(hsotg->uphy)) {
4394 spin_unlock_irqrestore(&hsotg->lock, flags);
4395 usb_phy_set_suspend(hsotg->uphy, true);
4396 spin_lock_irqsave(&hsotg->lock, flags);
4397 }
4398
4399 skip_power_saving:
4400 hsotg->lx_state = DWC2_L2;
4401 unlock:
4402 spin_unlock_irqrestore(&hsotg->lock, flags);
4403
4404 return ret;
4405 }
4406
_dwc2_hcd_resume(struct usb_hcd * hcd)4407 static int _dwc2_hcd_resume(struct usb_hcd *hcd)
4408 {
4409 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4410 unsigned long flags;
4411 u32 hprt0;
4412 int ret = 0;
4413
4414 spin_lock_irqsave(&hsotg->lock, flags);
4415
4416 if (dwc2_is_device_mode(hsotg))
4417 goto unlock;
4418
4419 if (hsotg->lx_state != DWC2_L2)
4420 goto unlock;
4421
4422 hprt0 = dwc2_read_hprt0(hsotg);
4423
4424 /*
4425 * Added port connection status checking which prevents exiting from
4426 * Partial Power Down mode from _dwc2_hcd_resume() if not in Partial
4427 * Power Down mode.
4428 */
4429 if (hprt0 & HPRT0_CONNSTS) {
4430 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4431 hsotg->lx_state = DWC2_L0;
4432 goto unlock;
4433 }
4434
4435 switch (hsotg->params.power_down) {
4436 case DWC2_POWER_DOWN_PARAM_PARTIAL:
4437 ret = dwc2_exit_partial_power_down(hsotg, 0, true);
4438 if (ret)
4439 dev_err(hsotg->dev,
4440 "exit partial_power_down failed\n");
4441 /*
4442 * Set HW accessible bit before powering on the controller
4443 * since an interrupt may rise.
4444 */
4445 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4446 break;
4447 case DWC2_POWER_DOWN_PARAM_HIBERNATION:
4448 ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
4449 if (ret)
4450 dev_err(hsotg->dev, "exit hibernation failed.\n");
4451
4452 /*
4453 * Set HW accessible bit before powering on the controller
4454 * since an interrupt may rise.
4455 */
4456 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4457 break;
4458 case DWC2_POWER_DOWN_PARAM_NONE:
4459 /*
4460 * If not hibernation nor partial power down are supported,
4461 * port resume is done using the clock gating programming flow.
4462 */
4463 spin_unlock_irqrestore(&hsotg->lock, flags);
4464 dwc2_host_exit_clock_gating(hsotg, 0);
4465
4466 /*
4467 * Initialize the Core for Host mode, as after system resume
4468 * the global interrupts are disabled.
4469 */
4470 dwc2_core_init(hsotg, false);
4471 dwc2_enable_global_interrupts(hsotg);
4472 dwc2_hcd_reinit(hsotg);
4473 spin_lock_irqsave(&hsotg->lock, flags);
4474
4475 /*
4476 * Set HW accessible bit before powering on the controller
4477 * since an interrupt may rise.
4478 */
4479 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
4480 break;
4481 default:
4482 hsotg->lx_state = DWC2_L0;
4483 goto unlock;
4484 }
4485
4486 /* Change Root port status, as port status change occurred after resume.*/
4487 hsotg->flags.b.port_suspend_change = 1;
4488
4489 /*
4490 * Enable power if not already done.
4491 * This must not be spinlocked since duration
4492 * of this call is unknown.
4493 */
4494 if (!IS_ERR_OR_NULL(hsotg->uphy)) {
4495 spin_unlock_irqrestore(&hsotg->lock, flags);
4496 usb_phy_set_suspend(hsotg->uphy, false);
4497 spin_lock_irqsave(&hsotg->lock, flags);
4498 }
4499
4500 /* Enable external vbus supply after resuming the port. */
4501 spin_unlock_irqrestore(&hsotg->lock, flags);
4502 dwc2_vbus_supply_init(hsotg);
4503
4504 /* Wait for controller to correctly update D+/D- level */
4505 usleep_range(3000, 5000);
4506 spin_lock_irqsave(&hsotg->lock, flags);
4507
4508 /*
4509 * Clear Port Enable and Port Status changes.
4510 * Enable Port Power.
4511 */
4512 dwc2_writel(hsotg, HPRT0_PWR | HPRT0_CONNDET |
4513 HPRT0_ENACHG, HPRT0);
4514
4515 /* Wait for controller to detect Port Connect */
4516 spin_unlock_irqrestore(&hsotg->lock, flags);
4517 usleep_range(5000, 7000);
4518 spin_lock_irqsave(&hsotg->lock, flags);
4519 unlock:
4520 spin_unlock_irqrestore(&hsotg->lock, flags);
4521
4522 return ret;
4523 }
4524
4525 /* Returns the current frame number */
_dwc2_hcd_get_frame_number(struct usb_hcd * hcd)4526 static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd)
4527 {
4528 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4529
4530 return dwc2_hcd_get_frame_number(hsotg);
4531 }
4532
dwc2_dump_urb_info(struct usb_hcd * hcd,struct urb * urb,char * fn_name)4533 static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb,
4534 char *fn_name)
4535 {
4536 #ifdef VERBOSE_DEBUG
4537 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4538 char *pipetype = NULL;
4539 char *speed = NULL;
4540
4541 dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb);
4542 dev_vdbg(hsotg->dev, " Device address: %d\n",
4543 usb_pipedevice(urb->pipe));
4544 dev_vdbg(hsotg->dev, " Endpoint: %d, %s\n",
4545 usb_pipeendpoint(urb->pipe),
4546 usb_pipein(urb->pipe) ? "IN" : "OUT");
4547
4548 switch (usb_pipetype(urb->pipe)) {
4549 case PIPE_CONTROL:
4550 pipetype = "CONTROL";
4551 break;
4552 case PIPE_BULK:
4553 pipetype = "BULK";
4554 break;
4555 case PIPE_INTERRUPT:
4556 pipetype = "INTERRUPT";
4557 break;
4558 case PIPE_ISOCHRONOUS:
4559 pipetype = "ISOCHRONOUS";
4560 break;
4561 }
4562
4563 dev_vdbg(hsotg->dev, " Endpoint type: %s %s (%s)\n", pipetype,
4564 usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ?
4565 "IN" : "OUT");
4566
4567 switch (urb->dev->speed) {
4568 case USB_SPEED_HIGH:
4569 speed = "HIGH";
4570 break;
4571 case USB_SPEED_FULL:
4572 speed = "FULL";
4573 break;
4574 case USB_SPEED_LOW:
4575 speed = "LOW";
4576 break;
4577 default:
4578 speed = "UNKNOWN";
4579 break;
4580 }
4581
4582 dev_vdbg(hsotg->dev, " Speed: %s\n", speed);
4583 dev_vdbg(hsotg->dev, " Max packet size: %d (%d mult)\n",
4584 usb_endpoint_maxp(&urb->ep->desc),
4585 usb_endpoint_maxp_mult(&urb->ep->desc));
4586
4587 dev_vdbg(hsotg->dev, " Data buffer length: %d\n",
4588 urb->transfer_buffer_length);
4589 dev_vdbg(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n",
4590 urb->transfer_buffer, (unsigned long)urb->transfer_dma);
4591 dev_vdbg(hsotg->dev, " Setup buffer: %p, Setup DMA: %08lx\n",
4592 urb->setup_packet, (unsigned long)urb->setup_dma);
4593 dev_vdbg(hsotg->dev, " Interval: %d\n", urb->interval);
4594
4595 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
4596 int i;
4597
4598 for (i = 0; i < urb->number_of_packets; i++) {
4599 dev_vdbg(hsotg->dev, " ISO Desc %d:\n", i);
4600 dev_vdbg(hsotg->dev, " offset: %d, length %d\n",
4601 urb->iso_frame_desc[i].offset,
4602 urb->iso_frame_desc[i].length);
4603 }
4604 }
4605 #endif
4606 }
4607
4608 /*
4609 * Starts processing a USB transfer request specified by a USB Request Block
4610 * (URB). mem_flags indicates the type of memory allocation to use while
4611 * processing this URB.
4612 */
_dwc2_hcd_urb_enqueue(struct usb_hcd * hcd,struct urb * urb,gfp_t mem_flags)4613 static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
4614 gfp_t mem_flags)
4615 {
4616 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4617 struct usb_host_endpoint *ep = urb->ep;
4618 struct dwc2_hcd_urb *dwc2_urb;
4619 int i;
4620 int retval;
4621 int alloc_bandwidth = 0;
4622 u8 ep_type = 0;
4623 u32 tflags = 0;
4624 void *buf;
4625 unsigned long flags;
4626 struct dwc2_qh *qh;
4627 bool qh_allocated = false;
4628 struct dwc2_qtd *qtd;
4629 struct dwc2_gregs_backup *gr;
4630
4631 gr = &hsotg->gr_backup;
4632
4633 if (dbg_urb(urb)) {
4634 dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n");
4635 dwc2_dump_urb_info(hcd, urb, "urb_enqueue");
4636 }
4637
4638 if (hsotg->hibernated) {
4639 if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
4640 retval = dwc2_exit_hibernation(hsotg, 0, 0, 1);
4641 else
4642 retval = dwc2_exit_hibernation(hsotg, 0, 0, 0);
4643
4644 if (retval)
4645 dev_err(hsotg->dev,
4646 "exit hibernation failed.\n");
4647 }
4648
4649 if (hsotg->in_ppd) {
4650 retval = dwc2_exit_partial_power_down(hsotg, 0, true);
4651 if (retval)
4652 dev_err(hsotg->dev,
4653 "exit partial_power_down failed\n");
4654 }
4655
4656 if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
4657 hsotg->bus_suspended && !hsotg->params.no_clock_gating) {
4658 if (dwc2_is_device_mode(hsotg))
4659 dwc2_gadget_exit_clock_gating(hsotg, 0);
4660 else
4661 dwc2_host_exit_clock_gating(hsotg, 0);
4662 }
4663
4664 if (!ep)
4665 return -EINVAL;
4666
4667 if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS ||
4668 usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
4669 spin_lock_irqsave(&hsotg->lock, flags);
4670 if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep))
4671 alloc_bandwidth = 1;
4672 spin_unlock_irqrestore(&hsotg->lock, flags);
4673 }
4674
4675 switch (usb_pipetype(urb->pipe)) {
4676 case PIPE_CONTROL:
4677 ep_type = USB_ENDPOINT_XFER_CONTROL;
4678 break;
4679 case PIPE_ISOCHRONOUS:
4680 ep_type = USB_ENDPOINT_XFER_ISOC;
4681 break;
4682 case PIPE_BULK:
4683 ep_type = USB_ENDPOINT_XFER_BULK;
4684 break;
4685 case PIPE_INTERRUPT:
4686 ep_type = USB_ENDPOINT_XFER_INT;
4687 break;
4688 }
4689
4690 dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets,
4691 mem_flags);
4692 if (!dwc2_urb)
4693 return -ENOMEM;
4694
4695 dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe),
4696 usb_pipeendpoint(urb->pipe), ep_type,
4697 usb_pipein(urb->pipe),
4698 usb_endpoint_maxp(&ep->desc),
4699 usb_endpoint_maxp_mult(&ep->desc));
4700
4701 buf = urb->transfer_buffer;
4702
4703 if (hcd_uses_dma(hcd)) {
4704 if (!buf && (urb->transfer_dma & 3)) {
4705 dev_err(hsotg->dev,
4706 "%s: unaligned transfer with no transfer_buffer",
4707 __func__);
4708 retval = -EINVAL;
4709 goto fail0;
4710 }
4711 }
4712
4713 if (!(urb->transfer_flags & URB_NO_INTERRUPT))
4714 tflags |= URB_GIVEBACK_ASAP;
4715 if (urb->transfer_flags & URB_ZERO_PACKET)
4716 tflags |= URB_SEND_ZERO_PACKET;
4717
4718 dwc2_urb->priv = urb;
4719 dwc2_urb->buf = buf;
4720 dwc2_urb->dma = urb->transfer_dma;
4721 dwc2_urb->length = urb->transfer_buffer_length;
4722 dwc2_urb->setup_packet = urb->setup_packet;
4723 dwc2_urb->setup_dma = urb->setup_dma;
4724 dwc2_urb->flags = tflags;
4725 dwc2_urb->interval = urb->interval;
4726 dwc2_urb->status = -EINPROGRESS;
4727
4728 for (i = 0; i < urb->number_of_packets; ++i)
4729 dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i,
4730 urb->iso_frame_desc[i].offset,
4731 urb->iso_frame_desc[i].length);
4732
4733 urb->hcpriv = dwc2_urb;
4734 qh = (struct dwc2_qh *)ep->hcpriv;
4735 /* Create QH for the endpoint if it doesn't exist */
4736 if (!qh) {
4737 qh = dwc2_hcd_qh_create(hsotg, dwc2_urb, mem_flags);
4738 if (!qh) {
4739 retval = -ENOMEM;
4740 goto fail0;
4741 }
4742 ep->hcpriv = qh;
4743 qh_allocated = true;
4744 }
4745
4746 qtd = kzalloc(sizeof(*qtd), mem_flags);
4747 if (!qtd) {
4748 retval = -ENOMEM;
4749 goto fail1;
4750 }
4751
4752 spin_lock_irqsave(&hsotg->lock, flags);
4753 retval = usb_hcd_link_urb_to_ep(hcd, urb);
4754 if (retval)
4755 goto fail2;
4756
4757 retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, qh, qtd);
4758 if (retval)
4759 goto fail3;
4760
4761 if (alloc_bandwidth) {
4762 dwc2_allocate_bus_bandwidth(hcd,
4763 dwc2_hcd_get_ep_bandwidth(hsotg, ep),
4764 urb);
4765 }
4766
4767 spin_unlock_irqrestore(&hsotg->lock, flags);
4768
4769 return 0;
4770
4771 fail3:
4772 dwc2_urb->priv = NULL;
4773 usb_hcd_unlink_urb_from_ep(hcd, urb);
4774 if (qh_allocated && qh->channel && qh->channel->qh == qh)
4775 qh->channel->qh = NULL;
4776 fail2:
4777 urb->hcpriv = NULL;
4778 spin_unlock_irqrestore(&hsotg->lock, flags);
4779 kfree(qtd);
4780 fail1:
4781 if (qh_allocated) {
4782 struct dwc2_qtd *qtd2, *qtd2_tmp;
4783
4784 ep->hcpriv = NULL;
4785 dwc2_hcd_qh_unlink(hsotg, qh);
4786 /* Free each QTD in the QH's QTD list */
4787 list_for_each_entry_safe(qtd2, qtd2_tmp, &qh->qtd_list,
4788 qtd_list_entry)
4789 dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh);
4790 dwc2_hcd_qh_free(hsotg, qh);
4791 }
4792 fail0:
4793 kfree(dwc2_urb);
4794
4795 return retval;
4796 }
4797
4798 /*
4799 * Aborts/cancels a USB transfer request. Always returns 0 to indicate success.
4800 */
_dwc2_hcd_urb_dequeue(struct usb_hcd * hcd,struct urb * urb,int status)4801 static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
4802 int status)
4803 {
4804 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4805 int rc;
4806 unsigned long flags;
4807
4808 dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n");
4809 dwc2_dump_urb_info(hcd, urb, "urb_dequeue");
4810
4811 spin_lock_irqsave(&hsotg->lock, flags);
4812
4813 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
4814 if (rc)
4815 goto out;
4816
4817 if (!urb->hcpriv) {
4818 dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
4819 goto out;
4820 }
4821
4822 rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv);
4823
4824 usb_hcd_unlink_urb_from_ep(hcd, urb);
4825
4826 kfree(urb->hcpriv);
4827 urb->hcpriv = NULL;
4828
4829 /* Higher layer software sets URB status */
4830 spin_unlock(&hsotg->lock);
4831 usb_hcd_giveback_urb(hcd, urb, status);
4832 spin_lock(&hsotg->lock);
4833
4834 dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n");
4835 dev_dbg(hsotg->dev, " urb->status = %d\n", urb->status);
4836 out:
4837 spin_unlock_irqrestore(&hsotg->lock, flags);
4838
4839 return rc;
4840 }
4841
4842 /*
4843 * Frees resources in the DWC_otg controller related to a given endpoint. Also
4844 * clears state in the HCD related to the endpoint. Any URBs for the endpoint
4845 * must already be dequeued.
4846 */
_dwc2_hcd_endpoint_disable(struct usb_hcd * hcd,struct usb_host_endpoint * ep)4847 static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd,
4848 struct usb_host_endpoint *ep)
4849 {
4850 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4851
4852 dev_dbg(hsotg->dev,
4853 "DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n",
4854 ep->desc.bEndpointAddress, ep->hcpriv);
4855 dwc2_hcd_endpoint_disable(hsotg, ep, 250);
4856 }
4857
4858 /*
4859 * Resets endpoint specific parameter values, in current version used to reset
4860 * the data toggle (as a WA). This function can be called from usb_clear_halt
4861 * routine.
4862 */
_dwc2_hcd_endpoint_reset(struct usb_hcd * hcd,struct usb_host_endpoint * ep)4863 static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd,
4864 struct usb_host_endpoint *ep)
4865 {
4866 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4867 unsigned long flags;
4868
4869 dev_dbg(hsotg->dev,
4870 "DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n",
4871 ep->desc.bEndpointAddress);
4872
4873 spin_lock_irqsave(&hsotg->lock, flags);
4874 dwc2_hcd_endpoint_reset(hsotg, ep);
4875 spin_unlock_irqrestore(&hsotg->lock, flags);
4876 }
4877
4878 /*
4879 * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
4880 * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
4881 * interrupt.
4882 *
4883 * This function is called by the USB core when an interrupt occurs
4884 */
_dwc2_hcd_irq(struct usb_hcd * hcd)4885 static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd)
4886 {
4887 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4888
4889 return dwc2_handle_hcd_intr(hsotg);
4890 }
4891
4892 /*
4893 * Creates Status Change bitmap for the root hub and root port. The bitmap is
4894 * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
4895 * is the status change indicator for the single root port. Returns 1 if either
4896 * change indicator is 1, otherwise returns 0.
4897 */
_dwc2_hcd_hub_status_data(struct usb_hcd * hcd,char * buf)4898 static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf)
4899 {
4900 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4901
4902 buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1;
4903 return buf[0] != 0;
4904 }
4905
4906 /* Handles hub class-specific requests */
_dwc2_hcd_hub_control(struct usb_hcd * hcd,u16 typereq,u16 wvalue,u16 windex,char * buf,u16 wlength)4907 static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue,
4908 u16 windex, char *buf, u16 wlength)
4909 {
4910 int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq,
4911 wvalue, windex, buf, wlength);
4912 return retval;
4913 }
4914
4915 /* Handles hub TT buffer clear completions */
_dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd * hcd,struct usb_host_endpoint * ep)4916 static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd,
4917 struct usb_host_endpoint *ep)
4918 {
4919 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4920 struct dwc2_qh *qh;
4921 unsigned long flags;
4922
4923 qh = ep->hcpriv;
4924 if (!qh)
4925 return;
4926
4927 spin_lock_irqsave(&hsotg->lock, flags);
4928 qh->tt_buffer_dirty = 0;
4929
4930 if (hsotg->flags.b.port_connect_status)
4931 dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL);
4932
4933 spin_unlock_irqrestore(&hsotg->lock, flags);
4934 }
4935
4936 /*
4937 * HPRT0_SPD_HIGH_SPEED: high speed
4938 * HPRT0_SPD_FULL_SPEED: full speed
4939 */
dwc2_change_bus_speed(struct usb_hcd * hcd,int speed)4940 static void dwc2_change_bus_speed(struct usb_hcd *hcd, int speed)
4941 {
4942 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4943
4944 if (hsotg->params.speed == speed)
4945 return;
4946
4947 hsotg->params.speed = speed;
4948 queue_work(hsotg->wq_otg, &hsotg->wf_otg);
4949 }
4950
dwc2_free_dev(struct usb_hcd * hcd,struct usb_device * udev)4951 static void dwc2_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
4952 {
4953 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4954
4955 if (!hsotg->params.change_speed_quirk)
4956 return;
4957
4958 /*
4959 * On removal, set speed to default high-speed.
4960 */
4961 if (udev->parent && udev->parent->speed > USB_SPEED_UNKNOWN &&
4962 udev->parent->speed < USB_SPEED_HIGH) {
4963 dev_info(hsotg->dev, "Set speed to default high-speed\n");
4964 dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED);
4965 }
4966 }
4967
dwc2_reset_device(struct usb_hcd * hcd,struct usb_device * udev)4968 static int dwc2_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
4969 {
4970 struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
4971
4972 if (!hsotg->params.change_speed_quirk)
4973 return 0;
4974
4975 if (udev->speed == USB_SPEED_HIGH) {
4976 dev_info(hsotg->dev, "Set speed to high-speed\n");
4977 dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED);
4978 } else if ((udev->speed == USB_SPEED_FULL ||
4979 udev->speed == USB_SPEED_LOW)) {
4980 /*
4981 * Change speed setting to full-speed if there's
4982 * a full-speed or low-speed device plugged in.
4983 */
4984 dev_info(hsotg->dev, "Set speed to full-speed\n");
4985 dwc2_change_bus_speed(hcd, HPRT0_SPD_FULL_SPEED);
4986 }
4987
4988 return 0;
4989 }
4990
4991 static struct hc_driver dwc2_hc_driver = {
4992 .description = "dwc2_hsotg",
4993 .product_desc = "DWC OTG Controller",
4994 .hcd_priv_size = sizeof(struct wrapper_priv_data),
4995
4996 .irq = _dwc2_hcd_irq,
4997 .flags = HCD_MEMORY | HCD_USB2 | HCD_BH,
4998
4999 .start = _dwc2_hcd_start,
5000 .stop = _dwc2_hcd_stop,
5001 .urb_enqueue = _dwc2_hcd_urb_enqueue,
5002 .urb_dequeue = _dwc2_hcd_urb_dequeue,
5003 .endpoint_disable = _dwc2_hcd_endpoint_disable,
5004 .endpoint_reset = _dwc2_hcd_endpoint_reset,
5005 .get_frame_number = _dwc2_hcd_get_frame_number,
5006
5007 .hub_status_data = _dwc2_hcd_hub_status_data,
5008 .hub_control = _dwc2_hcd_hub_control,
5009 .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete,
5010
5011 .bus_suspend = _dwc2_hcd_suspend,
5012 .bus_resume = _dwc2_hcd_resume,
5013
5014 .map_urb_for_dma = dwc2_map_urb_for_dma,
5015 .unmap_urb_for_dma = dwc2_unmap_urb_for_dma,
5016 };
5017
5018 /*
5019 * Frees secondary storage associated with the dwc2_hsotg structure contained
5020 * in the struct usb_hcd field
5021 */
dwc2_hcd_free(struct dwc2_hsotg * hsotg)5022 static void dwc2_hcd_free(struct dwc2_hsotg *hsotg)
5023 {
5024 u32 ahbcfg;
5025 u32 dctl;
5026 int i;
5027
5028 dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n");
5029
5030 /* Free memory for QH/QTD lists */
5031 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive);
5032 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_waiting);
5033 dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active);
5034 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive);
5035 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready);
5036 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned);
5037 dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued);
5038
5039 /* Free memory for the host channels */
5040 for (i = 0; i < MAX_EPS_CHANNELS; i++) {
5041 struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i];
5042
5043 if (chan) {
5044 dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n",
5045 i, chan);
5046 hsotg->hc_ptr_array[i] = NULL;
5047 kfree(chan);
5048 }
5049 }
5050
5051 if (hsotg->params.host_dma) {
5052 if (hsotg->status_buf) {
5053 dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE,
5054 hsotg->status_buf,
5055 hsotg->status_buf_dma);
5056 hsotg->status_buf = NULL;
5057 }
5058 } else {
5059 kfree(hsotg->status_buf);
5060 hsotg->status_buf = NULL;
5061 }
5062
5063 ahbcfg = dwc2_readl(hsotg, GAHBCFG);
5064
5065 /* Disable all interrupts */
5066 ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
5067 dwc2_writel(hsotg, ahbcfg, GAHBCFG);
5068 dwc2_writel(hsotg, 0, GINTMSK);
5069
5070 if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) {
5071 dctl = dwc2_readl(hsotg, DCTL);
5072 dctl |= DCTL_SFTDISCON;
5073 dwc2_writel(hsotg, dctl, DCTL);
5074 }
5075
5076 if (hsotg->wq_otg) {
5077 if (!cancel_work_sync(&hsotg->wf_otg))
5078 flush_workqueue(hsotg->wq_otg);
5079 destroy_workqueue(hsotg->wq_otg);
5080 }
5081
5082 cancel_work_sync(&hsotg->phy_reset_work);
5083
5084 del_timer(&hsotg->wkp_timer);
5085 }
5086
dwc2_hcd_release(struct dwc2_hsotg * hsotg)5087 static void dwc2_hcd_release(struct dwc2_hsotg *hsotg)
5088 {
5089 /* Turn off all host-specific interrupts */
5090 dwc2_disable_host_interrupts(hsotg);
5091
5092 dwc2_hcd_free(hsotg);
5093 }
5094
5095 /*
5096 * Initializes the HCD. This function allocates memory for and initializes the
5097 * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the
5098 * USB bus with the core and calls the hc_driver->start() function. It returns
5099 * a negative error on failure.
5100 */
dwc2_hcd_init(struct dwc2_hsotg * hsotg)5101 int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
5102 {
5103 struct platform_device *pdev = to_platform_device(hsotg->dev);
5104 struct resource *res;
5105 struct usb_hcd *hcd;
5106 struct dwc2_host_chan *channel;
5107 u32 hcfg;
5108 int i, num_channels;
5109 int retval;
5110
5111 if (usb_disabled())
5112 return -ENODEV;
5113
5114 dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n");
5115
5116 retval = -ENOMEM;
5117
5118 hcfg = dwc2_readl(hsotg, HCFG);
5119 dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg);
5120
5121 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
5122 hsotg->frame_num_array = kcalloc(FRAME_NUM_ARRAY_SIZE,
5123 sizeof(*hsotg->frame_num_array),
5124 GFP_KERNEL);
5125 if (!hsotg->frame_num_array)
5126 goto error1;
5127 hsotg->last_frame_num_array =
5128 kcalloc(FRAME_NUM_ARRAY_SIZE,
5129 sizeof(*hsotg->last_frame_num_array), GFP_KERNEL);
5130 if (!hsotg->last_frame_num_array)
5131 goto error1;
5132 #endif
5133 hsotg->last_frame_num = HFNUM_MAX_FRNUM;
5134
5135 /* Check if the bus driver or platform code has setup a dma_mask */
5136 if (hsotg->params.host_dma &&
5137 !hsotg->dev->dma_mask) {
5138 dev_warn(hsotg->dev,
5139 "dma_mask not set, disabling DMA\n");
5140 hsotg->params.host_dma = false;
5141 hsotg->params.dma_desc_enable = false;
5142 }
5143
5144 /* Set device flags indicating whether the HCD supports DMA */
5145 if (hsotg->params.host_dma) {
5146 if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0)
5147 dev_warn(hsotg->dev, "can't set DMA mask\n");
5148 if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0)
5149 dev_warn(hsotg->dev, "can't set coherent DMA mask\n");
5150 }
5151
5152 if (hsotg->params.change_speed_quirk) {
5153 dwc2_hc_driver.free_dev = dwc2_free_dev;
5154 dwc2_hc_driver.reset_device = dwc2_reset_device;
5155 }
5156
5157 if (hsotg->params.host_dma)
5158 dwc2_hc_driver.flags |= HCD_DMA;
5159
5160 hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev));
5161 if (!hcd)
5162 goto error1;
5163
5164 hcd->has_tt = 1;
5165
5166 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
5167 if (!res) {
5168 retval = -EINVAL;
5169 goto error2;
5170 }
5171 hcd->rsrc_start = res->start;
5172 hcd->rsrc_len = resource_size(res);
5173
5174 ((struct wrapper_priv_data *)&hcd->hcd_priv)->hsotg = hsotg;
5175 hsotg->priv = hcd;
5176
5177 /*
5178 * Disable the global interrupt until all the interrupt handlers are
5179 * installed
5180 */
5181 dwc2_disable_global_interrupts(hsotg);
5182
5183 /* Initialize the DWC_otg core, and select the Phy type */
5184 retval = dwc2_core_init(hsotg, true);
5185 if (retval)
5186 goto error2;
5187
5188 /* Create new workqueue and init work */
5189 retval = -ENOMEM;
5190 hsotg->wq_otg = alloc_ordered_workqueue("dwc2", 0);
5191 if (!hsotg->wq_otg) {
5192 dev_err(hsotg->dev, "Failed to create workqueue\n");
5193 goto error2;
5194 }
5195 INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change);
5196
5197 timer_setup(&hsotg->wkp_timer, dwc2_wakeup_detected, 0);
5198
5199 /* Initialize the non-periodic schedule */
5200 INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive);
5201 INIT_LIST_HEAD(&hsotg->non_periodic_sched_waiting);
5202 INIT_LIST_HEAD(&hsotg->non_periodic_sched_active);
5203
5204 /* Initialize the periodic schedule */
5205 INIT_LIST_HEAD(&hsotg->periodic_sched_inactive);
5206 INIT_LIST_HEAD(&hsotg->periodic_sched_ready);
5207 INIT_LIST_HEAD(&hsotg->periodic_sched_assigned);
5208 INIT_LIST_HEAD(&hsotg->periodic_sched_queued);
5209
5210 INIT_LIST_HEAD(&hsotg->split_order);
5211
5212 /*
5213 * Create a host channel descriptor for each host channel implemented
5214 * in the controller. Initialize the channel descriptor array.
5215 */
5216 INIT_LIST_HEAD(&hsotg->free_hc_list);
5217 num_channels = hsotg->params.host_channels;
5218 memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array));
5219
5220 for (i = 0; i < num_channels; i++) {
5221 channel = kzalloc(sizeof(*channel), GFP_KERNEL);
5222 if (!channel)
5223 goto error3;
5224 channel->hc_num = i;
5225 INIT_LIST_HEAD(&channel->split_order_list_entry);
5226 hsotg->hc_ptr_array[i] = channel;
5227 }
5228
5229 /* Initialize work */
5230 INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func);
5231 INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func);
5232 INIT_WORK(&hsotg->phy_reset_work, dwc2_hcd_phy_reset_func);
5233
5234 /*
5235 * Allocate space for storing data on status transactions. Normally no
5236 * data is sent, but this space acts as a bit bucket. This must be
5237 * done after usb_add_hcd since that function allocates the DMA buffer
5238 * pool.
5239 */
5240 if (hsotg->params.host_dma)
5241 hsotg->status_buf = dma_alloc_coherent(hsotg->dev,
5242 DWC2_HCD_STATUS_BUF_SIZE,
5243 &hsotg->status_buf_dma, GFP_KERNEL);
5244 else
5245 hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE,
5246 GFP_KERNEL);
5247
5248 if (!hsotg->status_buf)
5249 goto error3;
5250
5251 /*
5252 * Create kmem caches to handle descriptor buffers in descriptor
5253 * DMA mode.
5254 * Alignment must be set to 512 bytes.
5255 */
5256 if (hsotg->params.dma_desc_enable ||
5257 hsotg->params.dma_desc_fs_enable) {
5258 hsotg->desc_gen_cache = kmem_cache_create("dwc2-gen-desc",
5259 sizeof(struct dwc2_dma_desc) *
5260 MAX_DMA_DESC_NUM_GENERIC, 512, SLAB_CACHE_DMA,
5261 NULL);
5262 if (!hsotg->desc_gen_cache) {
5263 dev_err(hsotg->dev,
5264 "unable to create dwc2 generic desc cache\n");
5265
5266 /*
5267 * Disable descriptor dma mode since it will not be
5268 * usable.
5269 */
5270 hsotg->params.dma_desc_enable = false;
5271 hsotg->params.dma_desc_fs_enable = false;
5272 }
5273
5274 hsotg->desc_hsisoc_cache = kmem_cache_create("dwc2-hsisoc-desc",
5275 sizeof(struct dwc2_dma_desc) *
5276 MAX_DMA_DESC_NUM_HS_ISOC, 512, 0, NULL);
5277 if (!hsotg->desc_hsisoc_cache) {
5278 dev_err(hsotg->dev,
5279 "unable to create dwc2 hs isoc desc cache\n");
5280
5281 kmem_cache_destroy(hsotg->desc_gen_cache);
5282
5283 /*
5284 * Disable descriptor dma mode since it will not be
5285 * usable.
5286 */
5287 hsotg->params.dma_desc_enable = false;
5288 hsotg->params.dma_desc_fs_enable = false;
5289 }
5290 }
5291
5292 if (hsotg->params.host_dma) {
5293 /*
5294 * Create kmem caches to handle non-aligned buffer
5295 * in Buffer DMA mode.
5296 */
5297 hsotg->unaligned_cache = kmem_cache_create("dwc2-unaligned-dma",
5298 DWC2_KMEM_UNALIGNED_BUF_SIZE, 4,
5299 SLAB_CACHE_DMA, NULL);
5300 if (!hsotg->unaligned_cache)
5301 dev_err(hsotg->dev,
5302 "unable to create dwc2 unaligned cache\n");
5303 }
5304
5305 hsotg->otg_port = 1;
5306 hsotg->frame_list = NULL;
5307 hsotg->frame_list_dma = 0;
5308 hsotg->periodic_qh_count = 0;
5309
5310 /* Initiate lx_state to L3 disconnected state */
5311 hsotg->lx_state = DWC2_L3;
5312
5313 hcd->self.otg_port = hsotg->otg_port;
5314
5315 /* Don't support SG list at this point */
5316 hcd->self.sg_tablesize = 0;
5317
5318 hcd->tpl_support = of_usb_host_tpl_support(hsotg->dev->of_node);
5319
5320 if (!IS_ERR_OR_NULL(hsotg->uphy))
5321 otg_set_host(hsotg->uphy->otg, &hcd->self);
5322
5323 /*
5324 * Finish generic HCD initialization and start the HCD. This function
5325 * allocates the DMA buffer pool, registers the USB bus, requests the
5326 * IRQ line, and calls hcd_start method.
5327 */
5328 retval = usb_add_hcd(hcd, hsotg->irq, IRQF_SHARED);
5329 if (retval < 0)
5330 goto error4;
5331
5332 device_wakeup_enable(hcd->self.controller);
5333
5334 dwc2_hcd_dump_state(hsotg);
5335
5336 dwc2_enable_global_interrupts(hsotg);
5337
5338 return 0;
5339
5340 error4:
5341 kmem_cache_destroy(hsotg->unaligned_cache);
5342 kmem_cache_destroy(hsotg->desc_hsisoc_cache);
5343 kmem_cache_destroy(hsotg->desc_gen_cache);
5344 error3:
5345 dwc2_hcd_release(hsotg);
5346 error2:
5347 usb_put_hcd(hcd);
5348 error1:
5349
5350 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
5351 kfree(hsotg->last_frame_num_array);
5352 kfree(hsotg->frame_num_array);
5353 #endif
5354
5355 dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval);
5356 return retval;
5357 }
5358
5359 /*
5360 * Removes the HCD.
5361 * Frees memory and resources associated with the HCD and deregisters the bus.
5362 */
dwc2_hcd_remove(struct dwc2_hsotg * hsotg)5363 void dwc2_hcd_remove(struct dwc2_hsotg *hsotg)
5364 {
5365 struct usb_hcd *hcd;
5366
5367 dev_dbg(hsotg->dev, "DWC OTG HCD REMOVE\n");
5368
5369 hcd = dwc2_hsotg_to_hcd(hsotg);
5370 dev_dbg(hsotg->dev, "hsotg->hcd = %p\n", hcd);
5371
5372 if (!hcd) {
5373 dev_dbg(hsotg->dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n",
5374 __func__);
5375 return;
5376 }
5377
5378 if (!IS_ERR_OR_NULL(hsotg->uphy))
5379 otg_set_host(hsotg->uphy->otg, NULL);
5380
5381 usb_remove_hcd(hcd);
5382 hsotg->priv = NULL;
5383
5384 kmem_cache_destroy(hsotg->unaligned_cache);
5385 kmem_cache_destroy(hsotg->desc_hsisoc_cache);
5386 kmem_cache_destroy(hsotg->desc_gen_cache);
5387
5388 dwc2_hcd_release(hsotg);
5389 usb_put_hcd(hcd);
5390
5391 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
5392 kfree(hsotg->last_frame_num_array);
5393 kfree(hsotg->frame_num_array);
5394 #endif
5395 }
5396
5397 /**
5398 * dwc2_backup_host_registers() - Backup controller host registers.
5399 * When suspending usb bus, registers needs to be backuped
5400 * if controller power is disabled once suspended.
5401 *
5402 * @hsotg: Programming view of the DWC_otg controller
5403 */
dwc2_backup_host_registers(struct dwc2_hsotg * hsotg)5404 int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
5405 {
5406 struct dwc2_hregs_backup *hr;
5407 int i;
5408
5409 dev_dbg(hsotg->dev, "%s\n", __func__);
5410
5411 /* Backup Host regs */
5412 hr = &hsotg->hr_backup;
5413 hr->hcfg = dwc2_readl(hsotg, HCFG);
5414 hr->hflbaddr = dwc2_readl(hsotg, HFLBADDR);
5415 hr->haintmsk = dwc2_readl(hsotg, HAINTMSK);
5416 for (i = 0; i < hsotg->params.host_channels; ++i) {
5417 hr->hcchar[i] = dwc2_readl(hsotg, HCCHAR(i));
5418 hr->hcsplt[i] = dwc2_readl(hsotg, HCSPLT(i));
5419 hr->hcintmsk[i] = dwc2_readl(hsotg, HCINTMSK(i));
5420 hr->hctsiz[i] = dwc2_readl(hsotg, HCTSIZ(i));
5421 hr->hcidma[i] = dwc2_readl(hsotg, HCDMA(i));
5422 hr->hcidmab[i] = dwc2_readl(hsotg, HCDMAB(i));
5423 }
5424
5425 hr->hprt0 = dwc2_read_hprt0(hsotg);
5426 hr->hfir = dwc2_readl(hsotg, HFIR);
5427 hr->hptxfsiz = dwc2_readl(hsotg, HPTXFSIZ);
5428 hr->valid = true;
5429
5430 return 0;
5431 }
5432
5433 /**
5434 * dwc2_restore_host_registers() - Restore controller host registers.
5435 * When resuming usb bus, device registers needs to be restored
5436 * if controller power were disabled.
5437 *
5438 * @hsotg: Programming view of the DWC_otg controller
5439 */
dwc2_restore_host_registers(struct dwc2_hsotg * hsotg)5440 int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
5441 {
5442 struct dwc2_hregs_backup *hr;
5443 int i;
5444
5445 dev_dbg(hsotg->dev, "%s\n", __func__);
5446
5447 /* Restore host regs */
5448 hr = &hsotg->hr_backup;
5449 if (!hr->valid) {
5450 dev_err(hsotg->dev, "%s: no host registers to restore\n",
5451 __func__);
5452 return -EINVAL;
5453 }
5454 hr->valid = false;
5455
5456 dwc2_writel(hsotg, hr->hcfg, HCFG);
5457 dwc2_writel(hsotg, hr->hflbaddr, HFLBADDR);
5458 dwc2_writel(hsotg, hr->haintmsk, HAINTMSK);
5459
5460 for (i = 0; i < hsotg->params.host_channels; ++i) {
5461 dwc2_writel(hsotg, hr->hcchar[i], HCCHAR(i));
5462 dwc2_writel(hsotg, hr->hcsplt[i], HCSPLT(i));
5463 dwc2_writel(hsotg, hr->hcintmsk[i], HCINTMSK(i));
5464 dwc2_writel(hsotg, hr->hctsiz[i], HCTSIZ(i));
5465 dwc2_writel(hsotg, hr->hcidma[i], HCDMA(i));
5466 dwc2_writel(hsotg, hr->hcidmab[i], HCDMAB(i));
5467 }
5468
5469 dwc2_writel(hsotg, hr->hprt0, HPRT0);
5470 dwc2_writel(hsotg, hr->hfir, HFIR);
5471 dwc2_writel(hsotg, hr->hptxfsiz, HPTXFSIZ);
5472 hsotg->frame_number = 0;
5473
5474 return 0;
5475 }
5476
5477 /**
5478 * dwc2_host_enter_hibernation() - Put controller in Hibernation.
5479 *
5480 * @hsotg: Programming view of the DWC_otg controller
5481 */
dwc2_host_enter_hibernation(struct dwc2_hsotg * hsotg)5482 int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg)
5483 {
5484 unsigned long flags;
5485 int ret = 0;
5486 u32 hprt0;
5487 u32 pcgcctl;
5488 u32 gusbcfg;
5489 u32 gpwrdn;
5490
5491 dev_dbg(hsotg->dev, "Preparing host for hibernation\n");
5492 ret = dwc2_backup_global_registers(hsotg);
5493 if (ret) {
5494 dev_err(hsotg->dev, "%s: failed to backup global registers\n",
5495 __func__);
5496 return ret;
5497 }
5498 ret = dwc2_backup_host_registers(hsotg);
5499 if (ret) {
5500 dev_err(hsotg->dev, "%s: failed to backup host registers\n",
5501 __func__);
5502 return ret;
5503 }
5504
5505 /* Enter USB Suspend Mode */
5506 hprt0 = dwc2_readl(hsotg, HPRT0);
5507 hprt0 |= HPRT0_SUSP;
5508 hprt0 &= ~HPRT0_ENA;
5509 dwc2_writel(hsotg, hprt0, HPRT0);
5510
5511 /* Wait for the HPRT0.PrtSusp register field to be set */
5512 if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 5000))
5513 dev_warn(hsotg->dev, "Suspend wasn't generated\n");
5514
5515 /*
5516 * We need to disable interrupts to prevent servicing of any IRQ
5517 * during going to hibernation
5518 */
5519 spin_lock_irqsave(&hsotg->lock, flags);
5520 hsotg->lx_state = DWC2_L2;
5521
5522 gusbcfg = dwc2_readl(hsotg, GUSBCFG);
5523 if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) {
5524 /* ULPI interface */
5525 udelay(10);
5526 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5527 gpwrdn |= GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY;
5528 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5529 udelay(10);
5530 /* Suspend the Phy Clock */
5531 pcgcctl = dwc2_readl(hsotg, PCGCTL);
5532 pcgcctl |= PCGCTL_STOPPCLK;
5533 dwc2_writel(hsotg, pcgcctl, PCGCTL);
5534 udelay(10);
5535
5536 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5537 gpwrdn |= GPWRDN_PMUACTV;
5538 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5539 udelay(10);
5540 } else {
5541 /* UTMI+ Interface */
5542 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5543 gpwrdn |= GPWRDN_PMUACTV;
5544 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5545 udelay(10);
5546
5547 pcgcctl = dwc2_readl(hsotg, PCGCTL);
5548 pcgcctl |= PCGCTL_STOPPCLK;
5549 dwc2_writel(hsotg, pcgcctl, PCGCTL);
5550 udelay(10);
5551 }
5552
5553 /* Enable interrupts from wake up logic */
5554 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5555 gpwrdn |= GPWRDN_PMUINTSEL;
5556 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5557 udelay(10);
5558
5559 /* Unmask host mode interrupts in GPWRDN */
5560 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5561 gpwrdn |= GPWRDN_DISCONN_DET_MSK;
5562 gpwrdn |= GPWRDN_LNSTSCHG_MSK;
5563 gpwrdn |= GPWRDN_STS_CHGINT_MSK;
5564 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5565 udelay(10);
5566
5567 /* Enable Power Down Clamp */
5568 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5569 gpwrdn |= GPWRDN_PWRDNCLMP;
5570 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5571 udelay(10);
5572
5573 /* Switch off VDD */
5574 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5575 gpwrdn |= GPWRDN_PWRDNSWTCH;
5576 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5577
5578 hsotg->hibernated = 1;
5579 hsotg->bus_suspended = 1;
5580 dev_dbg(hsotg->dev, "Host hibernation completed\n");
5581 spin_unlock_irqrestore(&hsotg->lock, flags);
5582 return ret;
5583 }
5584
5585 /*
5586 * dwc2_host_exit_hibernation()
5587 *
5588 * @hsotg: Programming view of the DWC_otg controller
5589 * @rem_wakeup: indicates whether resume is initiated by Device or Host.
5590 * @param reset: indicates whether resume is initiated by Reset.
5591 *
5592 * Return: non-zero if failed to enter to hibernation.
5593 *
5594 * This function is for exiting from Host mode hibernation by
5595 * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup.
5596 */
dwc2_host_exit_hibernation(struct dwc2_hsotg * hsotg,int rem_wakeup,int reset)5597 int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
5598 int reset)
5599 {
5600 u32 gpwrdn;
5601 u32 hprt0;
5602 int ret = 0;
5603 struct dwc2_gregs_backup *gr;
5604 struct dwc2_hregs_backup *hr;
5605
5606 gr = &hsotg->gr_backup;
5607 hr = &hsotg->hr_backup;
5608
5609 dev_dbg(hsotg->dev,
5610 "%s: called with rem_wakeup = %d reset = %d\n",
5611 __func__, rem_wakeup, reset);
5612
5613 dwc2_hib_restore_common(hsotg, rem_wakeup, 1);
5614 hsotg->hibernated = 0;
5615
5616 /*
5617 * This step is not described in functional spec but if not wait for
5618 * this delay, mismatch interrupts occurred because just after restore
5619 * core is in Device mode(gintsts.curmode == 0)
5620 */
5621 mdelay(100);
5622
5623 /* Clear all pending interupts */
5624 dwc2_writel(hsotg, 0xffffffff, GINTSTS);
5625
5626 /* De-assert Restore */
5627 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5628 gpwrdn &= ~GPWRDN_RESTORE;
5629 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5630 udelay(10);
5631
5632 /* Restore GUSBCFG, HCFG */
5633 dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
5634 dwc2_writel(hsotg, hr->hcfg, HCFG);
5635
5636 /* Reset ULPI latch */
5637 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5638 gpwrdn &= ~GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY;
5639 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5640
5641 /* De-assert Wakeup Logic */
5642 if (!(rem_wakeup && hsotg->hw_params.snpsid >= DWC2_CORE_REV_4_30a)) {
5643 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5644 gpwrdn &= ~GPWRDN_PMUACTV;
5645 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5646 udelay(10);
5647 }
5648
5649 hprt0 = hr->hprt0;
5650 hprt0 |= HPRT0_PWR;
5651 hprt0 &= ~HPRT0_ENA;
5652 hprt0 &= ~HPRT0_SUSP;
5653 dwc2_writel(hsotg, hprt0, HPRT0);
5654
5655 hprt0 = hr->hprt0;
5656 hprt0 |= HPRT0_PWR;
5657 hprt0 &= ~HPRT0_ENA;
5658 hprt0 &= ~HPRT0_SUSP;
5659
5660 if (reset) {
5661 hprt0 |= HPRT0_RST;
5662 dwc2_writel(hsotg, hprt0, HPRT0);
5663
5664 /* Wait for Resume time and then program HPRT again */
5665 mdelay(60);
5666 hprt0 &= ~HPRT0_RST;
5667 dwc2_writel(hsotg, hprt0, HPRT0);
5668 } else {
5669 hprt0 |= HPRT0_RES;
5670 dwc2_writel(hsotg, hprt0, HPRT0);
5671
5672 /* De-assert Wakeup Logic */
5673 if ((rem_wakeup && hsotg->hw_params.snpsid >= DWC2_CORE_REV_4_30a)) {
5674 gpwrdn = dwc2_readl(hsotg, GPWRDN);
5675 gpwrdn &= ~GPWRDN_PMUACTV;
5676 dwc2_writel(hsotg, gpwrdn, GPWRDN);
5677 udelay(10);
5678 }
5679 /* Wait for Resume time and then program HPRT again */
5680 mdelay(100);
5681 hprt0 &= ~HPRT0_RES;
5682 dwc2_writel(hsotg, hprt0, HPRT0);
5683 }
5684 /* Clear all interrupt status */
5685 hprt0 = dwc2_readl(hsotg, HPRT0);
5686 hprt0 |= HPRT0_CONNDET;
5687 hprt0 |= HPRT0_ENACHG;
5688 hprt0 &= ~HPRT0_ENA;
5689 dwc2_writel(hsotg, hprt0, HPRT0);
5690
5691 hprt0 = dwc2_readl(hsotg, HPRT0);
5692
5693 /* Clear all pending interupts */
5694 dwc2_writel(hsotg, 0xffffffff, GINTSTS);
5695
5696 /* Restore global registers */
5697 ret = dwc2_restore_global_registers(hsotg);
5698 if (ret) {
5699 dev_err(hsotg->dev, "%s: failed to restore registers\n",
5700 __func__);
5701 return ret;
5702 }
5703
5704 /* Restore host registers */
5705 ret = dwc2_restore_host_registers(hsotg);
5706 if (ret) {
5707 dev_err(hsotg->dev, "%s: failed to restore host registers\n",
5708 __func__);
5709 return ret;
5710 }
5711
5712 if (rem_wakeup) {
5713 dwc2_hcd_rem_wakeup(hsotg);
5714 /*
5715 * Change "port_connect_status_change" flag to re-enumerate,
5716 * because after exit from hibernation port connection status
5717 * is not detected.
5718 */
5719 hsotg->flags.b.port_connect_status_change = 1;
5720 }
5721
5722 hsotg->hibernated = 0;
5723 hsotg->bus_suspended = 0;
5724 hsotg->lx_state = DWC2_L0;
5725 dev_dbg(hsotg->dev, "Host hibernation restore complete\n");
5726 return ret;
5727 }
5728
dwc2_host_can_poweroff_phy(struct dwc2_hsotg * dwc2)5729 bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2)
5730 {
5731 struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub;
5732
5733 /* If the controller isn't allowed to wakeup then we can power off. */
5734 if (!device_may_wakeup(dwc2->dev))
5735 return true;
5736
5737 /*
5738 * We don't want to power off the PHY if something under the
5739 * root hub has wakeup enabled.
5740 */
5741 if (usb_wakeup_enabled_descendants(root_hub))
5742 return false;
5743
5744 /* No reason to keep the PHY powered, so allow poweroff */
5745 return true;
5746 }
5747
5748 /**
5749 * dwc2_host_enter_partial_power_down() - Put controller in partial
5750 * power down.
5751 *
5752 * @hsotg: Programming view of the DWC_otg controller
5753 *
5754 * Return: non-zero if failed to enter host partial power down.
5755 *
5756 * This function is for entering Host mode partial power down.
5757 */
dwc2_host_enter_partial_power_down(struct dwc2_hsotg * hsotg)5758 int dwc2_host_enter_partial_power_down(struct dwc2_hsotg *hsotg)
5759 {
5760 u32 pcgcctl;
5761 u32 hprt0;
5762 int ret = 0;
5763
5764 dev_dbg(hsotg->dev, "Entering host partial power down started.\n");
5765
5766 /* Put this port in suspend mode. */
5767 hprt0 = dwc2_read_hprt0(hsotg);
5768 hprt0 |= HPRT0_SUSP;
5769 dwc2_writel(hsotg, hprt0, HPRT0);
5770 udelay(5);
5771
5772 /* Wait for the HPRT0.PrtSusp register field to be set */
5773 if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000))
5774 dev_warn(hsotg->dev, "Suspend wasn't generated\n");
5775
5776 /* Backup all registers */
5777 ret = dwc2_backup_global_registers(hsotg);
5778 if (ret) {
5779 dev_err(hsotg->dev, "%s: failed to backup global registers\n",
5780 __func__);
5781 return ret;
5782 }
5783
5784 ret = dwc2_backup_host_registers(hsotg);
5785 if (ret) {
5786 dev_err(hsotg->dev, "%s: failed to backup host registers\n",
5787 __func__);
5788 return ret;
5789 }
5790
5791 /*
5792 * Clear any pending interrupts since dwc2 will not be able to
5793 * clear them after entering partial_power_down.
5794 */
5795 dwc2_writel(hsotg, 0xffffffff, GINTSTS);
5796
5797 /* Put the controller in low power state */
5798 pcgcctl = dwc2_readl(hsotg, PCGCTL);
5799
5800 pcgcctl |= PCGCTL_PWRCLMP;
5801 dwc2_writel(hsotg, pcgcctl, PCGCTL);
5802 udelay(5);
5803
5804 pcgcctl |= PCGCTL_RSTPDWNMODULE;
5805 dwc2_writel(hsotg, pcgcctl, PCGCTL);
5806 udelay(5);
5807
5808 pcgcctl |= PCGCTL_STOPPCLK;
5809 dwc2_writel(hsotg, pcgcctl, PCGCTL);
5810
5811 /* Set in_ppd flag to 1 as here core enters suspend. */
5812 hsotg->in_ppd = 1;
5813 hsotg->lx_state = DWC2_L2;
5814 hsotg->bus_suspended = true;
5815
5816 dev_dbg(hsotg->dev, "Entering host partial power down completed.\n");
5817
5818 return ret;
5819 }
5820
5821 /*
5822 * dwc2_host_exit_partial_power_down() - Exit controller from host partial
5823 * power down.
5824 *
5825 * @hsotg: Programming view of the DWC_otg controller
5826 * @rem_wakeup: indicates whether resume is initiated by Reset.
5827 * @restore: indicates whether need to restore the registers or not.
5828 *
5829 * Return: non-zero if failed to exit host partial power down.
5830 *
5831 * This function is for exiting from Host mode partial power down.
5832 */
dwc2_host_exit_partial_power_down(struct dwc2_hsotg * hsotg,int rem_wakeup,bool restore)5833 int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg,
5834 int rem_wakeup, bool restore)
5835 {
5836 u32 pcgcctl;
5837 int ret = 0;
5838 u32 hprt0;
5839
5840 dev_dbg(hsotg->dev, "Exiting host partial power down started.\n");
5841
5842 pcgcctl = dwc2_readl(hsotg, PCGCTL);
5843 pcgcctl &= ~PCGCTL_STOPPCLK;
5844 dwc2_writel(hsotg, pcgcctl, PCGCTL);
5845 udelay(5);
5846
5847 pcgcctl = dwc2_readl(hsotg, PCGCTL);
5848 pcgcctl &= ~PCGCTL_PWRCLMP;
5849 dwc2_writel(hsotg, pcgcctl, PCGCTL);
5850 udelay(5);
5851
5852 pcgcctl = dwc2_readl(hsotg, PCGCTL);
5853 pcgcctl &= ~PCGCTL_RSTPDWNMODULE;
5854 dwc2_writel(hsotg, pcgcctl, PCGCTL);
5855
5856 udelay(100);
5857 if (restore) {
5858 ret = dwc2_restore_global_registers(hsotg);
5859 if (ret) {
5860 dev_err(hsotg->dev, "%s: failed to restore registers\n",
5861 __func__);
5862 return ret;
5863 }
5864
5865 ret = dwc2_restore_host_registers(hsotg);
5866 if (ret) {
5867 dev_err(hsotg->dev, "%s: failed to restore host registers\n",
5868 __func__);
5869 return ret;
5870 }
5871 }
5872
5873 /* Drive resume signaling and exit suspend mode on the port. */
5874 hprt0 = dwc2_read_hprt0(hsotg);
5875 hprt0 |= HPRT0_RES;
5876 hprt0 &= ~HPRT0_SUSP;
5877 dwc2_writel(hsotg, hprt0, HPRT0);
5878 udelay(5);
5879
5880 if (!rem_wakeup) {
5881 /* Stop driveing resume signaling on the port. */
5882 hprt0 = dwc2_read_hprt0(hsotg);
5883 hprt0 &= ~HPRT0_RES;
5884 dwc2_writel(hsotg, hprt0, HPRT0);
5885
5886 hsotg->bus_suspended = false;
5887 } else {
5888 /* Turn on the port power bit. */
5889 hprt0 = dwc2_read_hprt0(hsotg);
5890 hprt0 |= HPRT0_PWR;
5891 dwc2_writel(hsotg, hprt0, HPRT0);
5892
5893 /* Connect hcd. */
5894 dwc2_hcd_connect(hsotg);
5895
5896 mod_timer(&hsotg->wkp_timer,
5897 jiffies + msecs_to_jiffies(71));
5898 }
5899
5900 /* Set lx_state to and in_ppd to 0 as here core exits from suspend. */
5901 hsotg->in_ppd = 0;
5902 hsotg->lx_state = DWC2_L0;
5903
5904 dev_dbg(hsotg->dev, "Exiting host partial power down completed.\n");
5905 return ret;
5906 }
5907
5908 /**
5909 * dwc2_host_enter_clock_gating() - Put controller in clock gating.
5910 *
5911 * @hsotg: Programming view of the DWC_otg controller
5912 *
5913 * This function is for entering Host mode clock gating.
5914 */
dwc2_host_enter_clock_gating(struct dwc2_hsotg * hsotg)5915 void dwc2_host_enter_clock_gating(struct dwc2_hsotg *hsotg)
5916 {
5917 u32 hprt0;
5918 u32 pcgctl;
5919
5920 dev_dbg(hsotg->dev, "Entering host clock gating.\n");
5921
5922 /* Put this port in suspend mode. */
5923 hprt0 = dwc2_read_hprt0(hsotg);
5924 hprt0 |= HPRT0_SUSP;
5925 dwc2_writel(hsotg, hprt0, HPRT0);
5926
5927 /* Set the Phy Clock bit as suspend is received. */
5928 pcgctl = dwc2_readl(hsotg, PCGCTL);
5929 pcgctl |= PCGCTL_STOPPCLK;
5930 dwc2_writel(hsotg, pcgctl, PCGCTL);
5931 udelay(5);
5932
5933 /* Set the Gate hclk as suspend is received. */
5934 pcgctl = dwc2_readl(hsotg, PCGCTL);
5935 pcgctl |= PCGCTL_GATEHCLK;
5936 dwc2_writel(hsotg, pcgctl, PCGCTL);
5937 udelay(5);
5938
5939 hsotg->bus_suspended = true;
5940 hsotg->lx_state = DWC2_L2;
5941 }
5942
5943 /**
5944 * dwc2_host_exit_clock_gating() - Exit controller from clock gating.
5945 *
5946 * @hsotg: Programming view of the DWC_otg controller
5947 * @rem_wakeup: indicates whether resume is initiated by remote wakeup
5948 *
5949 * This function is for exiting Host mode clock gating.
5950 */
dwc2_host_exit_clock_gating(struct dwc2_hsotg * hsotg,int rem_wakeup)5951 void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup)
5952 {
5953 u32 hprt0;
5954 u32 pcgctl;
5955
5956 dev_dbg(hsotg->dev, "Exiting host clock gating.\n");
5957
5958 /* Clear the Gate hclk. */
5959 pcgctl = dwc2_readl(hsotg, PCGCTL);
5960 pcgctl &= ~PCGCTL_GATEHCLK;
5961 dwc2_writel(hsotg, pcgctl, PCGCTL);
5962 udelay(5);
5963
5964 /* Phy Clock bit. */
5965 pcgctl = dwc2_readl(hsotg, PCGCTL);
5966 pcgctl &= ~PCGCTL_STOPPCLK;
5967 dwc2_writel(hsotg, pcgctl, PCGCTL);
5968 udelay(5);
5969
5970 /* Drive resume signaling and exit suspend mode on the port. */
5971 hprt0 = dwc2_read_hprt0(hsotg);
5972 hprt0 |= HPRT0_RES;
5973 hprt0 &= ~HPRT0_SUSP;
5974 dwc2_writel(hsotg, hprt0, HPRT0);
5975 udelay(5);
5976
5977 if (!rem_wakeup) {
5978 /* In case of port resume need to wait for 40 ms */
5979 msleep(USB_RESUME_TIMEOUT);
5980
5981 /* Stop driveing resume signaling on the port. */
5982 hprt0 = dwc2_read_hprt0(hsotg);
5983 hprt0 &= ~HPRT0_RES;
5984 dwc2_writel(hsotg, hprt0, HPRT0);
5985
5986 hsotg->bus_suspended = false;
5987 hsotg->lx_state = DWC2_L0;
5988 } else {
5989 mod_timer(&hsotg->wkp_timer,
5990 jiffies + msecs_to_jiffies(71));
5991 }
5992 }
5993