1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * dummy_hcd.c -- Dummy/Loopback USB host and device emulator driver.
4 *
5 * Maintainer: Alan Stern <stern@rowland.harvard.edu>
6 *
7 * Copyright (C) 2003 David Brownell
8 * Copyright (C) 2003-2005 Alan Stern
9 */
10
11
12 /*
13 * This exposes a device side "USB gadget" API, driven by requests to a
14 * Linux-USB host controller driver. USB traffic is simulated; there's
15 * no need for USB hardware. Use this with two other drivers:
16 *
17 * - Gadget driver, responding to requests (device);
18 * - Host-side device driver, as already familiar in Linux.
19 *
20 * Having this all in one kernel can help some stages of development,
21 * bypassing some hardware (and driver) issues. UML could help too.
22 *
23 * Note: The emulation does not include isochronous transfers!
24 */
25
26 #include <linux/module.h>
27 #include <linux/kernel.h>
28 #include <linux/delay.h>
29 #include <linux/ioport.h>
30 #include <linux/slab.h>
31 #include <linux/errno.h>
32 #include <linux/init.h>
33 #include <linux/hrtimer.h>
34 #include <linux/list.h>
35 #include <linux/interrupt.h>
36 #include <linux/platform_device.h>
37 #include <linux/usb.h>
38 #include <linux/usb/gadget.h>
39 #include <linux/usb/hcd.h>
40 #include <linux/scatterlist.h>
41
42 #include <asm/byteorder.h>
43 #include <linux/io.h>
44 #include <asm/irq.h>
45 #include <linux/unaligned.h>
46
47 #define DRIVER_DESC "USB Host+Gadget Emulator"
48 #define DRIVER_VERSION "02 May 2005"
49
50 #define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */
51 #define POWER_BUDGET_3 900 /* in mA */
52
53 #define DUMMY_TIMER_INT_NSECS 125000 /* 1 microframe */
54
55 static const char driver_name[] = "dummy_hcd";
56 static const char driver_desc[] = "USB Host+Gadget Emulator";
57
58 static const char gadget_name[] = "dummy_udc";
59
60 MODULE_DESCRIPTION(DRIVER_DESC);
61 MODULE_AUTHOR("David Brownell");
62 MODULE_LICENSE("GPL");
63
64 struct dummy_hcd_module_parameters {
65 bool is_super_speed;
66 bool is_high_speed;
67 unsigned int num;
68 };
69
70 static struct dummy_hcd_module_parameters mod_data = {
71 .is_super_speed = false,
72 .is_high_speed = true,
73 .num = 1,
74 };
75 module_param_named(is_super_speed, mod_data.is_super_speed, bool, S_IRUGO);
76 MODULE_PARM_DESC(is_super_speed, "true to simulate SuperSpeed connection");
77 module_param_named(is_high_speed, mod_data.is_high_speed, bool, S_IRUGO);
78 MODULE_PARM_DESC(is_high_speed, "true to simulate HighSpeed connection");
79 module_param_named(num, mod_data.num, uint, S_IRUGO);
80 MODULE_PARM_DESC(num, "number of emulated controllers");
81 /*-------------------------------------------------------------------------*/
82
83 /* gadget side driver data structures */
84 struct dummy_ep {
85 struct list_head queue;
86 unsigned long last_io; /* jiffies timestamp */
87 struct usb_gadget *gadget;
88 const struct usb_endpoint_descriptor *desc;
89 struct usb_ep ep;
90 unsigned halted:1;
91 unsigned wedged:1;
92 unsigned already_seen:1;
93 unsigned setup_stage:1;
94 unsigned stream_en:1;
95 };
96
97 struct dummy_request {
98 struct list_head queue; /* ep's requests */
99 struct usb_request req;
100 };
101
usb_ep_to_dummy_ep(struct usb_ep * _ep)102 static inline struct dummy_ep *usb_ep_to_dummy_ep(struct usb_ep *_ep)
103 {
104 return container_of(_ep, struct dummy_ep, ep);
105 }
106
usb_request_to_dummy_request(struct usb_request * _req)107 static inline struct dummy_request *usb_request_to_dummy_request
108 (struct usb_request *_req)
109 {
110 return container_of(_req, struct dummy_request, req);
111 }
112
113 /*-------------------------------------------------------------------------*/
114
115 /*
116 * Every device has ep0 for control requests, plus up to 30 more endpoints,
117 * in one of two types:
118 *
119 * - Configurable: direction (in/out), type (bulk, iso, etc), and endpoint
120 * number can be changed. Names like "ep-a" are used for this type.
121 *
122 * - Fixed Function: in other cases. some characteristics may be mutable;
123 * that'd be hardware-specific. Names like "ep12out-bulk" are used.
124 *
125 * Gadget drivers are responsible for not setting up conflicting endpoint
126 * configurations, illegal or unsupported packet lengths, and so on.
127 */
128
129 static const char ep0name[] = "ep0";
130
131 static const struct {
132 const char *name;
133 const struct usb_ep_caps caps;
134 } ep_info[] = {
135 #define EP_INFO(_name, _caps) \
136 { \
137 .name = _name, \
138 .caps = _caps, \
139 }
140
141 /* we don't provide isochronous endpoints since we don't support them */
142 #define TYPE_BULK_OR_INT (USB_EP_CAPS_TYPE_BULK | USB_EP_CAPS_TYPE_INT)
143
144 /* everyone has ep0 */
145 EP_INFO(ep0name,
146 USB_EP_CAPS(USB_EP_CAPS_TYPE_CONTROL, USB_EP_CAPS_DIR_ALL)),
147 /* act like a pxa250: fifteen fixed function endpoints */
148 EP_INFO("ep1in-bulk",
149 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
150 EP_INFO("ep2out-bulk",
151 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
152 /*
153 EP_INFO("ep3in-iso",
154 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
155 EP_INFO("ep4out-iso",
156 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
157 */
158 EP_INFO("ep5in-int",
159 USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
160 EP_INFO("ep6in-bulk",
161 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
162 EP_INFO("ep7out-bulk",
163 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
164 /*
165 EP_INFO("ep8in-iso",
166 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
167 EP_INFO("ep9out-iso",
168 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
169 */
170 EP_INFO("ep10in-int",
171 USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
172 EP_INFO("ep11in-bulk",
173 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
174 EP_INFO("ep12out-bulk",
175 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
176 /*
177 EP_INFO("ep13in-iso",
178 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_IN)),
179 EP_INFO("ep14out-iso",
180 USB_EP_CAPS(USB_EP_CAPS_TYPE_ISO, USB_EP_CAPS_DIR_OUT)),
181 */
182 EP_INFO("ep15in-int",
183 USB_EP_CAPS(USB_EP_CAPS_TYPE_INT, USB_EP_CAPS_DIR_IN)),
184
185 /* or like sa1100: two fixed function endpoints */
186 EP_INFO("ep1out-bulk",
187 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_OUT)),
188 EP_INFO("ep2in-bulk",
189 USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)),
190
191 /* and now some generic EPs so we have enough in multi config */
192 EP_INFO("ep-aout",
193 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
194 EP_INFO("ep-bin",
195 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
196 EP_INFO("ep-cout",
197 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
198 EP_INFO("ep-dout",
199 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
200 EP_INFO("ep-ein",
201 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
202 EP_INFO("ep-fout",
203 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
204 EP_INFO("ep-gin",
205 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
206 EP_INFO("ep-hout",
207 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
208 EP_INFO("ep-iout",
209 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
210 EP_INFO("ep-jin",
211 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
212 EP_INFO("ep-kout",
213 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
214 EP_INFO("ep-lin",
215 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)),
216 EP_INFO("ep-mout",
217 USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)),
218
219 #undef EP_INFO
220 };
221
222 #define DUMMY_ENDPOINTS ARRAY_SIZE(ep_info)
223
224 /*-------------------------------------------------------------------------*/
225
226 #define FIFO_SIZE 64
227
228 struct urbp {
229 struct urb *urb;
230 struct list_head urbp_list;
231 struct sg_mapping_iter miter;
232 u32 miter_started;
233 };
234
235
236 enum dummy_rh_state {
237 DUMMY_RH_RESET,
238 DUMMY_RH_SUSPENDED,
239 DUMMY_RH_RUNNING
240 };
241
242 struct dummy_hcd {
243 struct dummy *dum;
244 enum dummy_rh_state rh_state;
245 struct hrtimer timer;
246 u32 port_status;
247 u32 old_status;
248 unsigned long re_timeout;
249
250 struct usb_device *udev;
251 struct list_head urbp_list;
252 struct urbp *next_frame_urbp;
253
254 u32 stream_en_ep;
255 u8 num_stream[30 / 2];
256
257 unsigned timer_pending:1;
258 unsigned active:1;
259 unsigned old_active:1;
260 unsigned resuming:1;
261 };
262
263 struct dummy {
264 spinlock_t lock;
265
266 /*
267 * DEVICE/GADGET side support
268 */
269 struct dummy_ep ep[DUMMY_ENDPOINTS];
270 int address;
271 int callback_usage;
272 struct usb_gadget gadget;
273 struct usb_gadget_driver *driver;
274 struct dummy_request fifo_req;
275 u8 fifo_buf[FIFO_SIZE];
276 u16 devstatus;
277 unsigned ints_enabled:1;
278 unsigned udc_suspended:1;
279 unsigned pullup:1;
280
281 /*
282 * HOST side support
283 */
284 struct dummy_hcd *hs_hcd;
285 struct dummy_hcd *ss_hcd;
286 };
287
hcd_to_dummy_hcd(struct usb_hcd * hcd)288 static inline struct dummy_hcd *hcd_to_dummy_hcd(struct usb_hcd *hcd)
289 {
290 return (struct dummy_hcd *) (hcd->hcd_priv);
291 }
292
dummy_hcd_to_hcd(struct dummy_hcd * dum)293 static inline struct usb_hcd *dummy_hcd_to_hcd(struct dummy_hcd *dum)
294 {
295 return container_of((void *) dum, struct usb_hcd, hcd_priv);
296 }
297
dummy_dev(struct dummy_hcd * dum)298 static inline struct device *dummy_dev(struct dummy_hcd *dum)
299 {
300 return dummy_hcd_to_hcd(dum)->self.controller;
301 }
302
udc_dev(struct dummy * dum)303 static inline struct device *udc_dev(struct dummy *dum)
304 {
305 return dum->gadget.dev.parent;
306 }
307
ep_to_dummy(struct dummy_ep * ep)308 static inline struct dummy *ep_to_dummy(struct dummy_ep *ep)
309 {
310 return container_of(ep->gadget, struct dummy, gadget);
311 }
312
gadget_to_dummy_hcd(struct usb_gadget * gadget)313 static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget)
314 {
315 struct dummy *dum = container_of(gadget, struct dummy, gadget);
316 if (dum->gadget.speed == USB_SPEED_SUPER)
317 return dum->ss_hcd;
318 else
319 return dum->hs_hcd;
320 }
321
gadget_dev_to_dummy(struct device * dev)322 static inline struct dummy *gadget_dev_to_dummy(struct device *dev)
323 {
324 return container_of(dev, struct dummy, gadget.dev);
325 }
326
327 /*-------------------------------------------------------------------------*/
328
329 /* DEVICE/GADGET SIDE UTILITY ROUTINES */
330
331 /* called with spinlock held */
nuke(struct dummy * dum,struct dummy_ep * ep)332 static void nuke(struct dummy *dum, struct dummy_ep *ep)
333 {
334 while (!list_empty(&ep->queue)) {
335 struct dummy_request *req;
336
337 req = list_entry(ep->queue.next, struct dummy_request, queue);
338 list_del_init(&req->queue);
339 req->req.status = -ESHUTDOWN;
340
341 spin_unlock(&dum->lock);
342 usb_gadget_giveback_request(&ep->ep, &req->req);
343 spin_lock(&dum->lock);
344 }
345 }
346
347 /* caller must hold lock */
stop_activity(struct dummy * dum)348 static void stop_activity(struct dummy *dum)
349 {
350 int i;
351
352 /* prevent any more requests */
353 dum->address = 0;
354
355 /* The timer is left running so that outstanding URBs can fail */
356
357 /* nuke any pending requests first, so driver i/o is quiesced */
358 for (i = 0; i < DUMMY_ENDPOINTS; ++i)
359 nuke(dum, &dum->ep[i]);
360
361 /* driver now does any non-usb quiescing necessary */
362 }
363
364 /**
365 * set_link_state_by_speed() - Sets the current state of the link according to
366 * the hcd speed
367 * @dum_hcd: pointer to the dummy_hcd structure to update the link state for
368 *
369 * This function updates the port_status according to the link state and the
370 * speed of the hcd.
371 */
set_link_state_by_speed(struct dummy_hcd * dum_hcd)372 static void set_link_state_by_speed(struct dummy_hcd *dum_hcd)
373 {
374 struct dummy *dum = dum_hcd->dum;
375
376 if (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3) {
377 if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) == 0) {
378 dum_hcd->port_status = 0;
379 } else if (!dum->pullup || dum->udc_suspended) {
380 /* UDC suspend must cause a disconnect */
381 dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
382 USB_PORT_STAT_ENABLE);
383 if ((dum_hcd->old_status &
384 USB_PORT_STAT_CONNECTION) != 0)
385 dum_hcd->port_status |=
386 (USB_PORT_STAT_C_CONNECTION << 16);
387 } else {
388 /* device is connected and not suspended */
389 dum_hcd->port_status |= (USB_PORT_STAT_CONNECTION |
390 USB_PORT_STAT_SPEED_5GBPS) ;
391 if ((dum_hcd->old_status &
392 USB_PORT_STAT_CONNECTION) == 0)
393 dum_hcd->port_status |=
394 (USB_PORT_STAT_C_CONNECTION << 16);
395 if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) &&
396 (dum_hcd->port_status &
397 USB_PORT_STAT_LINK_STATE) == USB_SS_PORT_LS_U0 &&
398 dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
399 dum_hcd->active = 1;
400 }
401 } else {
402 if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0) {
403 dum_hcd->port_status = 0;
404 } else if (!dum->pullup || dum->udc_suspended) {
405 /* UDC suspend must cause a disconnect */
406 dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
407 USB_PORT_STAT_ENABLE |
408 USB_PORT_STAT_LOW_SPEED |
409 USB_PORT_STAT_HIGH_SPEED |
410 USB_PORT_STAT_SUSPEND);
411 if ((dum_hcd->old_status &
412 USB_PORT_STAT_CONNECTION) != 0)
413 dum_hcd->port_status |=
414 (USB_PORT_STAT_C_CONNECTION << 16);
415 } else {
416 dum_hcd->port_status |= USB_PORT_STAT_CONNECTION;
417 if ((dum_hcd->old_status &
418 USB_PORT_STAT_CONNECTION) == 0)
419 dum_hcd->port_status |=
420 (USB_PORT_STAT_C_CONNECTION << 16);
421 if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0)
422 dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
423 else if ((dum_hcd->port_status &
424 USB_PORT_STAT_SUSPEND) == 0 &&
425 dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
426 dum_hcd->active = 1;
427 }
428 }
429 }
430
431 /* caller must hold lock */
set_link_state(struct dummy_hcd * dum_hcd)432 static void set_link_state(struct dummy_hcd *dum_hcd)
433 __must_hold(&dum->lock)
434 {
435 struct dummy *dum = dum_hcd->dum;
436 unsigned int power_bit;
437
438 dum_hcd->active = 0;
439 if (dum->pullup)
440 if ((dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 &&
441 dum->gadget.speed != USB_SPEED_SUPER) ||
442 (dummy_hcd_to_hcd(dum_hcd)->speed != HCD_USB3 &&
443 dum->gadget.speed == USB_SPEED_SUPER))
444 return;
445
446 set_link_state_by_speed(dum_hcd);
447 power_bit = (dummy_hcd_to_hcd(dum_hcd)->speed == HCD_USB3 ?
448 USB_SS_PORT_STAT_POWER : USB_PORT_STAT_POWER);
449
450 if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 ||
451 dum_hcd->active)
452 dum_hcd->resuming = 0;
453
454 /* Currently !connected or in reset */
455 if ((dum_hcd->port_status & power_bit) == 0 ||
456 (dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) {
457 unsigned int disconnect = power_bit &
458 dum_hcd->old_status & (~dum_hcd->port_status);
459 unsigned int reset = USB_PORT_STAT_RESET &
460 (~dum_hcd->old_status) & dum_hcd->port_status;
461
462 /* Report reset and disconnect events to the driver */
463 if (dum->ints_enabled && (disconnect || reset)) {
464 stop_activity(dum);
465 ++dum->callback_usage;
466 spin_unlock(&dum->lock);
467 if (reset)
468 usb_gadget_udc_reset(&dum->gadget, dum->driver);
469 else
470 dum->driver->disconnect(&dum->gadget);
471 spin_lock(&dum->lock);
472 --dum->callback_usage;
473 }
474 } else if (dum_hcd->active != dum_hcd->old_active &&
475 dum->ints_enabled) {
476 ++dum->callback_usage;
477 spin_unlock(&dum->lock);
478 if (dum_hcd->old_active && dum->driver->suspend)
479 dum->driver->suspend(&dum->gadget);
480 else if (!dum_hcd->old_active && dum->driver->resume)
481 dum->driver->resume(&dum->gadget);
482 spin_lock(&dum->lock);
483 --dum->callback_usage;
484 }
485
486 dum_hcd->old_status = dum_hcd->port_status;
487 dum_hcd->old_active = dum_hcd->active;
488 }
489
490 /*-------------------------------------------------------------------------*/
491
492 /* DEVICE/GADGET SIDE DRIVER
493 *
494 * This only tracks gadget state. All the work is done when the host
495 * side tries some (emulated) i/o operation. Real device controller
496 * drivers would do real i/o using dma, fifos, irqs, timers, etc.
497 */
498
499 #define is_enabled(dum) \
500 (dum->port_status & USB_PORT_STAT_ENABLE)
501
dummy_enable(struct usb_ep * _ep,const struct usb_endpoint_descriptor * desc)502 static int dummy_enable(struct usb_ep *_ep,
503 const struct usb_endpoint_descriptor *desc)
504 {
505 struct dummy *dum;
506 struct dummy_hcd *dum_hcd;
507 struct dummy_ep *ep;
508 unsigned max;
509 int retval;
510
511 ep = usb_ep_to_dummy_ep(_ep);
512 if (!_ep || !desc || ep->desc || _ep->name == ep0name
513 || desc->bDescriptorType != USB_DT_ENDPOINT)
514 return -EINVAL;
515 dum = ep_to_dummy(ep);
516 if (!dum->driver)
517 return -ESHUTDOWN;
518
519 dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
520 if (!is_enabled(dum_hcd))
521 return -ESHUTDOWN;
522
523 /*
524 * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the
525 * maximum packet size.
526 * For SS devices the wMaxPacketSize is limited by 1024.
527 */
528 max = usb_endpoint_maxp(desc);
529
530 /* drivers must not request bad settings, since lower levels
531 * (hardware or its drivers) may not check. some endpoints
532 * can't do iso, many have maxpacket limitations, etc.
533 *
534 * since this "hardware" driver is here to help debugging, we
535 * have some extra sanity checks. (there could be more though,
536 * especially for "ep9out" style fixed function ones.)
537 */
538 retval = -EINVAL;
539 switch (usb_endpoint_type(desc)) {
540 case USB_ENDPOINT_XFER_BULK:
541 if (strstr(ep->ep.name, "-iso")
542 || strstr(ep->ep.name, "-int")) {
543 goto done;
544 }
545 switch (dum->gadget.speed) {
546 case USB_SPEED_SUPER:
547 if (max == 1024)
548 break;
549 goto done;
550 case USB_SPEED_HIGH:
551 if (max == 512)
552 break;
553 goto done;
554 case USB_SPEED_FULL:
555 if (max == 8 || max == 16 || max == 32 || max == 64)
556 /* we'll fake any legal size */
557 break;
558 /* save a return statement */
559 fallthrough;
560 default:
561 goto done;
562 }
563 break;
564 case USB_ENDPOINT_XFER_INT:
565 if (strstr(ep->ep.name, "-iso")) /* bulk is ok */
566 goto done;
567 /* real hardware might not handle all packet sizes */
568 switch (dum->gadget.speed) {
569 case USB_SPEED_SUPER:
570 case USB_SPEED_HIGH:
571 if (max <= 1024)
572 break;
573 /* save a return statement */
574 fallthrough;
575 case USB_SPEED_FULL:
576 if (max <= 64)
577 break;
578 /* save a return statement */
579 fallthrough;
580 default:
581 if (max <= 8)
582 break;
583 goto done;
584 }
585 break;
586 case USB_ENDPOINT_XFER_ISOC:
587 if (strstr(ep->ep.name, "-bulk")
588 || strstr(ep->ep.name, "-int"))
589 goto done;
590 /* real hardware might not handle all packet sizes */
591 switch (dum->gadget.speed) {
592 case USB_SPEED_SUPER:
593 case USB_SPEED_HIGH:
594 if (max <= 1024)
595 break;
596 /* save a return statement */
597 fallthrough;
598 case USB_SPEED_FULL:
599 if (max <= 1023)
600 break;
601 /* save a return statement */
602 fallthrough;
603 default:
604 goto done;
605 }
606 break;
607 default:
608 /* few chips support control except on ep0 */
609 goto done;
610 }
611
612 _ep->maxpacket = max;
613 if (usb_ss_max_streams(_ep->comp_desc)) {
614 if (!usb_endpoint_xfer_bulk(desc)) {
615 dev_err(udc_dev(dum), "Can't enable stream support on "
616 "non-bulk ep %s\n", _ep->name);
617 return -EINVAL;
618 }
619 ep->stream_en = 1;
620 }
621 ep->desc = desc;
622
623 dev_dbg(udc_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d stream %s\n",
624 _ep->name,
625 desc->bEndpointAddress & 0x0f,
626 (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
627 usb_ep_type_string(usb_endpoint_type(desc)),
628 max, ep->stream_en ? "enabled" : "disabled");
629
630 /* at this point real hardware should be NAKing transfers
631 * to that endpoint, until a buffer is queued to it.
632 */
633 ep->halted = ep->wedged = 0;
634 retval = 0;
635 done:
636 return retval;
637 }
638
dummy_disable(struct usb_ep * _ep)639 static int dummy_disable(struct usb_ep *_ep)
640 {
641 struct dummy_ep *ep;
642 struct dummy *dum;
643 unsigned long flags;
644
645 ep = usb_ep_to_dummy_ep(_ep);
646 if (!_ep || !ep->desc || _ep->name == ep0name)
647 return -EINVAL;
648 dum = ep_to_dummy(ep);
649
650 spin_lock_irqsave(&dum->lock, flags);
651 ep->desc = NULL;
652 ep->stream_en = 0;
653 nuke(dum, ep);
654 spin_unlock_irqrestore(&dum->lock, flags);
655
656 dev_dbg(udc_dev(dum), "disabled %s\n", _ep->name);
657 return 0;
658 }
659
dummy_alloc_request(struct usb_ep * _ep,gfp_t mem_flags)660 static struct usb_request *dummy_alloc_request(struct usb_ep *_ep,
661 gfp_t mem_flags)
662 {
663 struct dummy_request *req;
664
665 if (!_ep)
666 return NULL;
667
668 req = kzalloc(sizeof(*req), mem_flags);
669 if (!req)
670 return NULL;
671 INIT_LIST_HEAD(&req->queue);
672 return &req->req;
673 }
674
dummy_free_request(struct usb_ep * _ep,struct usb_request * _req)675 static void dummy_free_request(struct usb_ep *_ep, struct usb_request *_req)
676 {
677 struct dummy_request *req;
678
679 if (!_ep || !_req) {
680 WARN_ON(1);
681 return;
682 }
683
684 req = usb_request_to_dummy_request(_req);
685 WARN_ON(!list_empty(&req->queue));
686 kfree(req);
687 }
688
fifo_complete(struct usb_ep * ep,struct usb_request * req)689 static void fifo_complete(struct usb_ep *ep, struct usb_request *req)
690 {
691 }
692
dummy_queue(struct usb_ep * _ep,struct usb_request * _req,gfp_t mem_flags)693 static int dummy_queue(struct usb_ep *_ep, struct usb_request *_req,
694 gfp_t mem_flags)
695 {
696 struct dummy_ep *ep;
697 struct dummy_request *req;
698 struct dummy *dum;
699 struct dummy_hcd *dum_hcd;
700 unsigned long flags;
701
702 req = usb_request_to_dummy_request(_req);
703 if (!_req || !list_empty(&req->queue) || !_req->complete)
704 return -EINVAL;
705
706 ep = usb_ep_to_dummy_ep(_ep);
707 if (!_ep || (!ep->desc && _ep->name != ep0name))
708 return -EINVAL;
709
710 dum = ep_to_dummy(ep);
711 dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
712 if (!dum->driver || !is_enabled(dum_hcd))
713 return -ESHUTDOWN;
714
715 #if 0
716 dev_dbg(udc_dev(dum), "ep %p queue req %p to %s, len %d buf %p\n",
717 ep, _req, _ep->name, _req->length, _req->buf);
718 #endif
719 _req->status = -EINPROGRESS;
720 _req->actual = 0;
721 spin_lock_irqsave(&dum->lock, flags);
722
723 /* implement an emulated single-request FIFO */
724 if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
725 list_empty(&dum->fifo_req.queue) &&
726 list_empty(&ep->queue) &&
727 _req->length <= FIFO_SIZE) {
728 req = &dum->fifo_req;
729 req->req = *_req;
730 req->req.buf = dum->fifo_buf;
731 memcpy(dum->fifo_buf, _req->buf, _req->length);
732 req->req.context = dum;
733 req->req.complete = fifo_complete;
734
735 list_add_tail(&req->queue, &ep->queue);
736 spin_unlock(&dum->lock);
737 _req->actual = _req->length;
738 _req->status = 0;
739 usb_gadget_giveback_request(_ep, _req);
740 spin_lock(&dum->lock);
741 } else
742 list_add_tail(&req->queue, &ep->queue);
743 spin_unlock_irqrestore(&dum->lock, flags);
744
745 /* real hardware would likely enable transfers here, in case
746 * it'd been left NAKing.
747 */
748 return 0;
749 }
750
dummy_dequeue(struct usb_ep * _ep,struct usb_request * _req)751 static int dummy_dequeue(struct usb_ep *_ep, struct usb_request *_req)
752 {
753 struct dummy_ep *ep;
754 struct dummy *dum;
755 int retval = -EINVAL;
756 unsigned long flags;
757 struct dummy_request *req = NULL, *iter;
758
759 if (!_ep || !_req)
760 return retval;
761 ep = usb_ep_to_dummy_ep(_ep);
762 dum = ep_to_dummy(ep);
763
764 if (!dum->driver)
765 return -ESHUTDOWN;
766
767 local_irq_save(flags);
768 spin_lock(&dum->lock);
769 list_for_each_entry(iter, &ep->queue, queue) {
770 if (&iter->req != _req)
771 continue;
772 list_del_init(&iter->queue);
773 _req->status = -ECONNRESET;
774 req = iter;
775 retval = 0;
776 break;
777 }
778 spin_unlock(&dum->lock);
779
780 if (retval == 0) {
781 dev_dbg(udc_dev(dum),
782 "dequeued req %p from %s, len %d buf %p\n",
783 req, _ep->name, _req->length, _req->buf);
784 usb_gadget_giveback_request(_ep, _req);
785 }
786 local_irq_restore(flags);
787 return retval;
788 }
789
790 static int
dummy_set_halt_and_wedge(struct usb_ep * _ep,int value,int wedged)791 dummy_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
792 {
793 struct dummy_ep *ep;
794 struct dummy *dum;
795
796 if (!_ep)
797 return -EINVAL;
798 ep = usb_ep_to_dummy_ep(_ep);
799 dum = ep_to_dummy(ep);
800 if (!dum->driver)
801 return -ESHUTDOWN;
802 if (!value)
803 ep->halted = ep->wedged = 0;
804 else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
805 !list_empty(&ep->queue))
806 return -EAGAIN;
807 else {
808 ep->halted = 1;
809 if (wedged)
810 ep->wedged = 1;
811 }
812 /* FIXME clear emulated data toggle too */
813 return 0;
814 }
815
816 static int
dummy_set_halt(struct usb_ep * _ep,int value)817 dummy_set_halt(struct usb_ep *_ep, int value)
818 {
819 return dummy_set_halt_and_wedge(_ep, value, 0);
820 }
821
dummy_set_wedge(struct usb_ep * _ep)822 static int dummy_set_wedge(struct usb_ep *_ep)
823 {
824 if (!_ep || _ep->name == ep0name)
825 return -EINVAL;
826 return dummy_set_halt_and_wedge(_ep, 1, 1);
827 }
828
829 static const struct usb_ep_ops dummy_ep_ops = {
830 .enable = dummy_enable,
831 .disable = dummy_disable,
832
833 .alloc_request = dummy_alloc_request,
834 .free_request = dummy_free_request,
835
836 .queue = dummy_queue,
837 .dequeue = dummy_dequeue,
838
839 .set_halt = dummy_set_halt,
840 .set_wedge = dummy_set_wedge,
841 };
842
843 /*-------------------------------------------------------------------------*/
844
845 /* there are both host and device side versions of this call ... */
dummy_g_get_frame(struct usb_gadget * _gadget)846 static int dummy_g_get_frame(struct usb_gadget *_gadget)
847 {
848 struct timespec64 ts64;
849
850 ktime_get_ts64(&ts64);
851 return ts64.tv_nsec / NSEC_PER_MSEC;
852 }
853
dummy_wakeup(struct usb_gadget * _gadget)854 static int dummy_wakeup(struct usb_gadget *_gadget)
855 {
856 struct dummy_hcd *dum_hcd;
857
858 dum_hcd = gadget_to_dummy_hcd(_gadget);
859 if (!(dum_hcd->dum->devstatus & ((1 << USB_DEVICE_B_HNP_ENABLE)
860 | (1 << USB_DEVICE_REMOTE_WAKEUP))))
861 return -EINVAL;
862 if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0)
863 return -ENOLINK;
864 if ((dum_hcd->port_status & USB_PORT_STAT_SUSPEND) == 0 &&
865 dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
866 return -EIO;
867
868 /* FIXME: What if the root hub is suspended but the port isn't? */
869
870 /* hub notices our request, issues downstream resume, etc */
871 dum_hcd->resuming = 1;
872 dum_hcd->re_timeout = jiffies + msecs_to_jiffies(20);
873 mod_timer(&dummy_hcd_to_hcd(dum_hcd)->rh_timer, dum_hcd->re_timeout);
874 return 0;
875 }
876
dummy_set_selfpowered(struct usb_gadget * _gadget,int value)877 static int dummy_set_selfpowered(struct usb_gadget *_gadget, int value)
878 {
879 struct dummy *dum;
880
881 _gadget->is_selfpowered = (value != 0);
882 dum = gadget_to_dummy_hcd(_gadget)->dum;
883 if (value)
884 dum->devstatus |= (1 << USB_DEVICE_SELF_POWERED);
885 else
886 dum->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
887 return 0;
888 }
889
dummy_udc_update_ep0(struct dummy * dum)890 static void dummy_udc_update_ep0(struct dummy *dum)
891 {
892 if (dum->gadget.speed == USB_SPEED_SUPER)
893 dum->ep[0].ep.maxpacket = 9;
894 else
895 dum->ep[0].ep.maxpacket = 64;
896 }
897
dummy_pullup(struct usb_gadget * _gadget,int value)898 static int dummy_pullup(struct usb_gadget *_gadget, int value)
899 {
900 struct dummy_hcd *dum_hcd;
901 struct dummy *dum;
902 unsigned long flags;
903
904 dum = gadget_dev_to_dummy(&_gadget->dev);
905 dum_hcd = gadget_to_dummy_hcd(_gadget);
906
907 spin_lock_irqsave(&dum->lock, flags);
908 dum->pullup = (value != 0);
909 set_link_state(dum_hcd);
910 if (value == 0) {
911 /*
912 * Emulate synchronize_irq(): wait for callbacks to finish.
913 * This seems to be the best place to emulate the call to
914 * synchronize_irq() that's in usb_gadget_remove_driver().
915 * Doing it in dummy_udc_stop() would be too late since it
916 * is called after the unbind callback and unbind shouldn't
917 * be invoked until all the other callbacks are finished.
918 */
919 while (dum->callback_usage > 0) {
920 spin_unlock_irqrestore(&dum->lock, flags);
921 usleep_range(1000, 2000);
922 spin_lock_irqsave(&dum->lock, flags);
923 }
924 }
925 spin_unlock_irqrestore(&dum->lock, flags);
926
927 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
928 return 0;
929 }
930
dummy_udc_set_speed(struct usb_gadget * _gadget,enum usb_device_speed speed)931 static void dummy_udc_set_speed(struct usb_gadget *_gadget,
932 enum usb_device_speed speed)
933 {
934 struct dummy *dum;
935
936 dum = gadget_dev_to_dummy(&_gadget->dev);
937 dum->gadget.speed = speed;
938 dummy_udc_update_ep0(dum);
939 }
940
dummy_udc_async_callbacks(struct usb_gadget * _gadget,bool enable)941 static void dummy_udc_async_callbacks(struct usb_gadget *_gadget, bool enable)
942 {
943 struct dummy *dum = gadget_dev_to_dummy(&_gadget->dev);
944
945 spin_lock_irq(&dum->lock);
946 dum->ints_enabled = enable;
947 spin_unlock_irq(&dum->lock);
948 }
949
950 static int dummy_udc_start(struct usb_gadget *g,
951 struct usb_gadget_driver *driver);
952 static int dummy_udc_stop(struct usb_gadget *g);
953
954 static const struct usb_gadget_ops dummy_ops = {
955 .get_frame = dummy_g_get_frame,
956 .wakeup = dummy_wakeup,
957 .set_selfpowered = dummy_set_selfpowered,
958 .pullup = dummy_pullup,
959 .udc_start = dummy_udc_start,
960 .udc_stop = dummy_udc_stop,
961 .udc_set_speed = dummy_udc_set_speed,
962 .udc_async_callbacks = dummy_udc_async_callbacks,
963 };
964
965 /*-------------------------------------------------------------------------*/
966
967 /* "function" sysfs attribute */
function_show(struct device * dev,struct device_attribute * attr,char * buf)968 static ssize_t function_show(struct device *dev, struct device_attribute *attr,
969 char *buf)
970 {
971 struct dummy *dum = gadget_dev_to_dummy(dev);
972
973 if (!dum->driver || !dum->driver->function)
974 return 0;
975 return scnprintf(buf, PAGE_SIZE, "%s\n", dum->driver->function);
976 }
977 static DEVICE_ATTR_RO(function);
978
979 /*-------------------------------------------------------------------------*/
980
981 /*
982 * Driver registration/unregistration.
983 *
984 * This is basically hardware-specific; there's usually only one real USB
985 * device (not host) controller since that's how USB devices are intended
986 * to work. So most implementations of these api calls will rely on the
987 * fact that only one driver will ever bind to the hardware. But curious
988 * hardware can be built with discrete components, so the gadget API doesn't
989 * require that assumption.
990 *
991 * For this emulator, it might be convenient to create a usb device
992 * for each driver that registers: just add to a big root hub.
993 */
994
dummy_udc_start(struct usb_gadget * g,struct usb_gadget_driver * driver)995 static int dummy_udc_start(struct usb_gadget *g,
996 struct usb_gadget_driver *driver)
997 {
998 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g);
999 struct dummy *dum = dum_hcd->dum;
1000
1001 switch (g->speed) {
1002 /* All the speeds we support */
1003 case USB_SPEED_LOW:
1004 case USB_SPEED_FULL:
1005 case USB_SPEED_HIGH:
1006 case USB_SPEED_SUPER:
1007 break;
1008 default:
1009 dev_err(dummy_dev(dum_hcd), "Unsupported driver max speed %d\n",
1010 driver->max_speed);
1011 return -EINVAL;
1012 }
1013
1014 /*
1015 * DEVICE side init ... the layer above hardware, which
1016 * can't enumerate without help from the driver we're binding.
1017 */
1018
1019 spin_lock_irq(&dum->lock);
1020 dum->devstatus = 0;
1021 dum->driver = driver;
1022 spin_unlock_irq(&dum->lock);
1023
1024 return 0;
1025 }
1026
dummy_udc_stop(struct usb_gadget * g)1027 static int dummy_udc_stop(struct usb_gadget *g)
1028 {
1029 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(g);
1030 struct dummy *dum = dum_hcd->dum;
1031
1032 spin_lock_irq(&dum->lock);
1033 dum->ints_enabled = 0;
1034 stop_activity(dum);
1035 dum->driver = NULL;
1036 spin_unlock_irq(&dum->lock);
1037
1038 return 0;
1039 }
1040
1041 #undef is_enabled
1042
1043 /* The gadget structure is stored inside the hcd structure and will be
1044 * released along with it. */
init_dummy_udc_hw(struct dummy * dum)1045 static void init_dummy_udc_hw(struct dummy *dum)
1046 {
1047 int i;
1048
1049 INIT_LIST_HEAD(&dum->gadget.ep_list);
1050 for (i = 0; i < DUMMY_ENDPOINTS; i++) {
1051 struct dummy_ep *ep = &dum->ep[i];
1052
1053 if (!ep_info[i].name)
1054 break;
1055 ep->ep.name = ep_info[i].name;
1056 ep->ep.caps = ep_info[i].caps;
1057 ep->ep.ops = &dummy_ep_ops;
1058 list_add_tail(&ep->ep.ep_list, &dum->gadget.ep_list);
1059 ep->halted = ep->wedged = ep->already_seen =
1060 ep->setup_stage = 0;
1061 usb_ep_set_maxpacket_limit(&ep->ep, ~0);
1062 ep->ep.max_streams = 16;
1063 ep->last_io = jiffies;
1064 ep->gadget = &dum->gadget;
1065 ep->desc = NULL;
1066 INIT_LIST_HEAD(&ep->queue);
1067 }
1068
1069 dum->gadget.ep0 = &dum->ep[0].ep;
1070 list_del_init(&dum->ep[0].ep.ep_list);
1071 INIT_LIST_HEAD(&dum->fifo_req.queue);
1072
1073 #ifdef CONFIG_USB_OTG
1074 dum->gadget.is_otg = 1;
1075 #endif
1076 }
1077
dummy_udc_probe(struct platform_device * pdev)1078 static int dummy_udc_probe(struct platform_device *pdev)
1079 {
1080 struct dummy *dum;
1081 int rc;
1082
1083 dum = *((void **)dev_get_platdata(&pdev->dev));
1084 /* Clear usb_gadget region for new registration to udc-core */
1085 memzero_explicit(&dum->gadget, sizeof(struct usb_gadget));
1086 dum->gadget.name = gadget_name;
1087 dum->gadget.ops = &dummy_ops;
1088 if (mod_data.is_super_speed)
1089 dum->gadget.max_speed = USB_SPEED_SUPER;
1090 else if (mod_data.is_high_speed)
1091 dum->gadget.max_speed = USB_SPEED_HIGH;
1092 else
1093 dum->gadget.max_speed = USB_SPEED_FULL;
1094
1095 dum->gadget.dev.parent = &pdev->dev;
1096 init_dummy_udc_hw(dum);
1097
1098 rc = usb_add_gadget_udc(&pdev->dev, &dum->gadget);
1099 if (rc < 0)
1100 goto err_udc;
1101
1102 rc = device_create_file(&dum->gadget.dev, &dev_attr_function);
1103 if (rc < 0)
1104 goto err_dev;
1105 platform_set_drvdata(pdev, dum);
1106 return rc;
1107
1108 err_dev:
1109 usb_del_gadget_udc(&dum->gadget);
1110 err_udc:
1111 return rc;
1112 }
1113
dummy_udc_remove(struct platform_device * pdev)1114 static void dummy_udc_remove(struct platform_device *pdev)
1115 {
1116 struct dummy *dum = platform_get_drvdata(pdev);
1117
1118 device_remove_file(&dum->gadget.dev, &dev_attr_function);
1119 usb_del_gadget_udc(&dum->gadget);
1120 }
1121
dummy_udc_pm(struct dummy * dum,struct dummy_hcd * dum_hcd,int suspend)1122 static void dummy_udc_pm(struct dummy *dum, struct dummy_hcd *dum_hcd,
1123 int suspend)
1124 {
1125 spin_lock_irq(&dum->lock);
1126 dum->udc_suspended = suspend;
1127 set_link_state(dum_hcd);
1128 spin_unlock_irq(&dum->lock);
1129 }
1130
dummy_udc_suspend(struct platform_device * pdev,pm_message_t state)1131 static int dummy_udc_suspend(struct platform_device *pdev, pm_message_t state)
1132 {
1133 struct dummy *dum = platform_get_drvdata(pdev);
1134 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
1135
1136 dev_dbg(&pdev->dev, "%s\n", __func__);
1137 dummy_udc_pm(dum, dum_hcd, 1);
1138 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
1139 return 0;
1140 }
1141
dummy_udc_resume(struct platform_device * pdev)1142 static int dummy_udc_resume(struct platform_device *pdev)
1143 {
1144 struct dummy *dum = platform_get_drvdata(pdev);
1145 struct dummy_hcd *dum_hcd = gadget_to_dummy_hcd(&dum->gadget);
1146
1147 dev_dbg(&pdev->dev, "%s\n", __func__);
1148 dummy_udc_pm(dum, dum_hcd, 0);
1149 usb_hcd_poll_rh_status(dummy_hcd_to_hcd(dum_hcd));
1150 return 0;
1151 }
1152
1153 static struct platform_driver dummy_udc_driver = {
1154 .probe = dummy_udc_probe,
1155 .remove = dummy_udc_remove,
1156 .suspend = dummy_udc_suspend,
1157 .resume = dummy_udc_resume,
1158 .driver = {
1159 .name = gadget_name,
1160 },
1161 };
1162
1163 /*-------------------------------------------------------------------------*/
1164
dummy_get_ep_idx(const struct usb_endpoint_descriptor * desc)1165 static unsigned int dummy_get_ep_idx(const struct usb_endpoint_descriptor *desc)
1166 {
1167 unsigned int index;
1168
1169 index = usb_endpoint_num(desc) << 1;
1170 if (usb_endpoint_dir_in(desc))
1171 index |= 1;
1172 return index;
1173 }
1174
1175 /* HOST SIDE DRIVER
1176 *
1177 * this uses the hcd framework to hook up to host side drivers.
1178 * its root hub will only have one device, otherwise it acts like
1179 * a normal host controller.
1180 *
1181 * when urbs are queued, they're just stuck on a list that we
1182 * scan in a timer callback. that callback connects writes from
1183 * the host with reads from the device, and so on, based on the
1184 * usb 2.0 rules.
1185 */
1186
dummy_ep_stream_en(struct dummy_hcd * dum_hcd,struct urb * urb)1187 static int dummy_ep_stream_en(struct dummy_hcd *dum_hcd, struct urb *urb)
1188 {
1189 const struct usb_endpoint_descriptor *desc = &urb->ep->desc;
1190 u32 index;
1191
1192 if (!usb_endpoint_xfer_bulk(desc))
1193 return 0;
1194
1195 index = dummy_get_ep_idx(desc);
1196 return (1 << index) & dum_hcd->stream_en_ep;
1197 }
1198
1199 /*
1200 * The max stream number is saved as a nibble so for the 30 possible endpoints
1201 * we only 15 bytes of memory. Therefore we are limited to max 16 streams (0
1202 * means we use only 1 stream). The maximum according to the spec is 16bit so
1203 * if the 16 stream limit is about to go, the array size should be incremented
1204 * to 30 elements of type u16.
1205 */
get_max_streams_for_pipe(struct dummy_hcd * dum_hcd,unsigned int pipe)1206 static int get_max_streams_for_pipe(struct dummy_hcd *dum_hcd,
1207 unsigned int pipe)
1208 {
1209 int max_streams;
1210
1211 max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)];
1212 if (usb_pipeout(pipe))
1213 max_streams >>= 4;
1214 else
1215 max_streams &= 0xf;
1216 max_streams++;
1217 return max_streams;
1218 }
1219
set_max_streams_for_pipe(struct dummy_hcd * dum_hcd,unsigned int pipe,unsigned int streams)1220 static void set_max_streams_for_pipe(struct dummy_hcd *dum_hcd,
1221 unsigned int pipe, unsigned int streams)
1222 {
1223 int max_streams;
1224
1225 streams--;
1226 max_streams = dum_hcd->num_stream[usb_pipeendpoint(pipe)];
1227 if (usb_pipeout(pipe)) {
1228 streams <<= 4;
1229 max_streams &= 0xf;
1230 } else {
1231 max_streams &= 0xf0;
1232 }
1233 max_streams |= streams;
1234 dum_hcd->num_stream[usb_pipeendpoint(pipe)] = max_streams;
1235 }
1236
dummy_validate_stream(struct dummy_hcd * dum_hcd,struct urb * urb)1237 static int dummy_validate_stream(struct dummy_hcd *dum_hcd, struct urb *urb)
1238 {
1239 unsigned int max_streams;
1240 int enabled;
1241
1242 enabled = dummy_ep_stream_en(dum_hcd, urb);
1243 if (!urb->stream_id) {
1244 if (enabled)
1245 return -EINVAL;
1246 return 0;
1247 }
1248 if (!enabled)
1249 return -EINVAL;
1250
1251 max_streams = get_max_streams_for_pipe(dum_hcd,
1252 usb_pipeendpoint(urb->pipe));
1253 if (urb->stream_id > max_streams) {
1254 dev_err(dummy_dev(dum_hcd), "Stream id %d is out of range.\n",
1255 urb->stream_id);
1256 BUG();
1257 return -EINVAL;
1258 }
1259 return 0;
1260 }
1261
dummy_urb_enqueue(struct usb_hcd * hcd,struct urb * urb,gfp_t mem_flags)1262 static int dummy_urb_enqueue(
1263 struct usb_hcd *hcd,
1264 struct urb *urb,
1265 gfp_t mem_flags
1266 ) {
1267 struct dummy_hcd *dum_hcd;
1268 struct urbp *urbp;
1269 unsigned long flags;
1270 int rc;
1271
1272 urbp = kmalloc(sizeof *urbp, mem_flags);
1273 if (!urbp)
1274 return -ENOMEM;
1275 urbp->urb = urb;
1276 urbp->miter_started = 0;
1277
1278 dum_hcd = hcd_to_dummy_hcd(hcd);
1279 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
1280
1281 rc = dummy_validate_stream(dum_hcd, urb);
1282 if (rc) {
1283 kfree(urbp);
1284 goto done;
1285 }
1286
1287 rc = usb_hcd_link_urb_to_ep(hcd, urb);
1288 if (rc) {
1289 kfree(urbp);
1290 goto done;
1291 }
1292
1293 if (!dum_hcd->udev) {
1294 dum_hcd->udev = urb->dev;
1295 usb_get_dev(dum_hcd->udev);
1296 } else if (unlikely(dum_hcd->udev != urb->dev))
1297 dev_err(dummy_dev(dum_hcd), "usb_device address has changed!\n");
1298
1299 list_add_tail(&urbp->urbp_list, &dum_hcd->urbp_list);
1300 urb->hcpriv = urbp;
1301 if (!dum_hcd->next_frame_urbp)
1302 dum_hcd->next_frame_urbp = urbp;
1303 if (usb_pipetype(urb->pipe) == PIPE_CONTROL)
1304 urb->error_count = 1; /* mark as a new urb */
1305
1306 /* kick the scheduler, it'll do the rest */
1307 if (!dum_hcd->timer_pending) {
1308 dum_hcd->timer_pending = 1;
1309 hrtimer_start(&dum_hcd->timer, ns_to_ktime(DUMMY_TIMER_INT_NSECS),
1310 HRTIMER_MODE_REL_SOFT);
1311 }
1312
1313 done:
1314 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
1315 return rc;
1316 }
1317
dummy_urb_dequeue(struct usb_hcd * hcd,struct urb * urb,int status)1318 static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
1319 {
1320 struct dummy_hcd *dum_hcd;
1321 unsigned long flags;
1322 int rc;
1323
1324 /* giveback happens automatically in timer callback,
1325 * so make sure the callback happens */
1326 dum_hcd = hcd_to_dummy_hcd(hcd);
1327 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
1328
1329 rc = usb_hcd_check_unlink_urb(hcd, urb, status);
1330 if (rc == 0 && !dum_hcd->timer_pending) {
1331 dum_hcd->timer_pending = 1;
1332 hrtimer_start(&dum_hcd->timer, ns_to_ktime(0), HRTIMER_MODE_REL_SOFT);
1333 }
1334
1335 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
1336 return rc;
1337 }
1338
dummy_perform_transfer(struct urb * urb,struct dummy_request * req,u32 len)1339 static int dummy_perform_transfer(struct urb *urb, struct dummy_request *req,
1340 u32 len)
1341 {
1342 void *ubuf, *rbuf;
1343 struct urbp *urbp = urb->hcpriv;
1344 int to_host;
1345 struct sg_mapping_iter *miter = &urbp->miter;
1346 u32 trans = 0;
1347 u32 this_sg;
1348 bool next_sg;
1349
1350 to_host = usb_urb_dir_in(urb);
1351 rbuf = req->req.buf + req->req.actual;
1352
1353 if (!urb->num_sgs) {
1354 ubuf = urb->transfer_buffer + urb->actual_length;
1355 if (to_host)
1356 memcpy(ubuf, rbuf, len);
1357 else
1358 memcpy(rbuf, ubuf, len);
1359 return len;
1360 }
1361
1362 if (!urbp->miter_started) {
1363 u32 flags = SG_MITER_ATOMIC;
1364
1365 if (to_host)
1366 flags |= SG_MITER_TO_SG;
1367 else
1368 flags |= SG_MITER_FROM_SG;
1369
1370 sg_miter_start(miter, urb->sg, urb->num_sgs, flags);
1371 urbp->miter_started = 1;
1372 }
1373 next_sg = sg_miter_next(miter);
1374 if (next_sg == false) {
1375 WARN_ON_ONCE(1);
1376 return -EINVAL;
1377 }
1378 do {
1379 ubuf = miter->addr;
1380 this_sg = min_t(u32, len, miter->length);
1381 miter->consumed = this_sg;
1382 trans += this_sg;
1383
1384 if (to_host)
1385 memcpy(ubuf, rbuf, this_sg);
1386 else
1387 memcpy(rbuf, ubuf, this_sg);
1388 len -= this_sg;
1389
1390 if (!len)
1391 break;
1392 next_sg = sg_miter_next(miter);
1393 if (next_sg == false) {
1394 WARN_ON_ONCE(1);
1395 return -EINVAL;
1396 }
1397
1398 rbuf += this_sg;
1399 } while (1);
1400
1401 sg_miter_stop(miter);
1402 return trans;
1403 }
1404
1405 /* transfer up to a frame's worth; caller must own lock */
transfer(struct dummy_hcd * dum_hcd,struct urb * urb,struct dummy_ep * ep,int limit,int * status)1406 static int transfer(struct dummy_hcd *dum_hcd, struct urb *urb,
1407 struct dummy_ep *ep, int limit, int *status)
1408 {
1409 struct dummy *dum = dum_hcd->dum;
1410 struct dummy_request *req;
1411 int sent = 0;
1412
1413 top:
1414 /* if there's no request queued, the device is NAKing; return */
1415 list_for_each_entry(req, &ep->queue, queue) {
1416 unsigned host_len, dev_len, len;
1417 int is_short, to_host;
1418 int rescan = 0;
1419
1420 if (dummy_ep_stream_en(dum_hcd, urb)) {
1421 if ((urb->stream_id != req->req.stream_id))
1422 continue;
1423 }
1424
1425 /* 1..N packets of ep->ep.maxpacket each ... the last one
1426 * may be short (including zero length).
1427 *
1428 * writer can send a zlp explicitly (length 0) or implicitly
1429 * (length mod maxpacket zero, and 'zero' flag); they always
1430 * terminate reads.
1431 */
1432 host_len = urb->transfer_buffer_length - urb->actual_length;
1433 dev_len = req->req.length - req->req.actual;
1434 len = min(host_len, dev_len);
1435
1436 /* FIXME update emulated data toggle too */
1437
1438 to_host = usb_urb_dir_in(urb);
1439 if (unlikely(len == 0))
1440 is_short = 1;
1441 else {
1442 /* not enough bandwidth left? */
1443 if (limit < ep->ep.maxpacket && limit < len)
1444 break;
1445 len = min_t(unsigned, len, limit);
1446 if (len == 0)
1447 break;
1448
1449 /* send multiple of maxpacket first, then remainder */
1450 if (len >= ep->ep.maxpacket) {
1451 is_short = 0;
1452 if (len % ep->ep.maxpacket)
1453 rescan = 1;
1454 len -= len % ep->ep.maxpacket;
1455 } else {
1456 is_short = 1;
1457 }
1458
1459 len = dummy_perform_transfer(urb, req, len);
1460
1461 ep->last_io = jiffies;
1462 if ((int)len < 0) {
1463 req->req.status = len;
1464 } else {
1465 limit -= len;
1466 sent += len;
1467 urb->actual_length += len;
1468 req->req.actual += len;
1469 }
1470 }
1471
1472 /* short packets terminate, maybe with overflow/underflow.
1473 * it's only really an error to write too much.
1474 *
1475 * partially filling a buffer optionally blocks queue advances
1476 * (so completion handlers can clean up the queue) but we don't
1477 * need to emulate such data-in-flight.
1478 */
1479 if (is_short) {
1480 if (host_len == dev_len) {
1481 req->req.status = 0;
1482 *status = 0;
1483 } else if (to_host) {
1484 req->req.status = 0;
1485 if (dev_len > host_len)
1486 *status = -EOVERFLOW;
1487 else
1488 *status = 0;
1489 } else {
1490 *status = 0;
1491 if (host_len > dev_len)
1492 req->req.status = -EOVERFLOW;
1493 else
1494 req->req.status = 0;
1495 }
1496
1497 /*
1498 * many requests terminate without a short packet.
1499 * send a zlp if demanded by flags.
1500 */
1501 } else {
1502 if (req->req.length == req->req.actual) {
1503 if (req->req.zero && to_host)
1504 rescan = 1;
1505 else
1506 req->req.status = 0;
1507 }
1508 if (urb->transfer_buffer_length == urb->actual_length) {
1509 if (urb->transfer_flags & URB_ZERO_PACKET &&
1510 !to_host)
1511 rescan = 1;
1512 else
1513 *status = 0;
1514 }
1515 }
1516
1517 /* device side completion --> continuable */
1518 if (req->req.status != -EINPROGRESS) {
1519 list_del_init(&req->queue);
1520
1521 spin_unlock(&dum->lock);
1522 usb_gadget_giveback_request(&ep->ep, &req->req);
1523 spin_lock(&dum->lock);
1524
1525 /* requests might have been unlinked... */
1526 rescan = 1;
1527 }
1528
1529 /* host side completion --> terminate */
1530 if (*status != -EINPROGRESS)
1531 break;
1532
1533 /* rescan to continue with any other queued i/o */
1534 if (rescan)
1535 goto top;
1536 }
1537 return sent;
1538 }
1539
periodic_bytes(struct dummy * dum,struct dummy_ep * ep)1540 static int periodic_bytes(struct dummy *dum, struct dummy_ep *ep)
1541 {
1542 int limit = ep->ep.maxpacket;
1543
1544 if (dum->gadget.speed == USB_SPEED_HIGH) {
1545 int tmp;
1546
1547 /* high bandwidth mode */
1548 tmp = usb_endpoint_maxp_mult(ep->desc);
1549 tmp *= 8 /* applies to entire frame */;
1550 limit += limit * tmp;
1551 }
1552 if (dum->gadget.speed == USB_SPEED_SUPER) {
1553 switch (usb_endpoint_type(ep->desc)) {
1554 case USB_ENDPOINT_XFER_ISOC:
1555 /* Sec. 4.4.8.2 USB3.0 Spec */
1556 limit = 3 * 16 * 1024 * 8;
1557 break;
1558 case USB_ENDPOINT_XFER_INT:
1559 /* Sec. 4.4.7.2 USB3.0 Spec */
1560 limit = 3 * 1024 * 8;
1561 break;
1562 case USB_ENDPOINT_XFER_BULK:
1563 default:
1564 break;
1565 }
1566 }
1567 return limit;
1568 }
1569
1570 #define is_active(dum_hcd) ((dum_hcd->port_status & \
1571 (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | \
1572 USB_PORT_STAT_SUSPEND)) \
1573 == (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE))
1574
find_endpoint(struct dummy * dum,u8 address)1575 static struct dummy_ep *find_endpoint(struct dummy *dum, u8 address)
1576 {
1577 int i;
1578
1579 if (!is_active((dum->gadget.speed == USB_SPEED_SUPER ?
1580 dum->ss_hcd : dum->hs_hcd)))
1581 return NULL;
1582 if (!dum->ints_enabled)
1583 return NULL;
1584 if ((address & ~USB_DIR_IN) == 0)
1585 return &dum->ep[0];
1586 for (i = 1; i < DUMMY_ENDPOINTS; i++) {
1587 struct dummy_ep *ep = &dum->ep[i];
1588
1589 if (!ep->desc)
1590 continue;
1591 if (ep->desc->bEndpointAddress == address)
1592 return ep;
1593 }
1594 return NULL;
1595 }
1596
1597 #undef is_active
1598
1599 #define Dev_Request (USB_TYPE_STANDARD | USB_RECIP_DEVICE)
1600 #define Dev_InRequest (Dev_Request | USB_DIR_IN)
1601 #define Intf_Request (USB_TYPE_STANDARD | USB_RECIP_INTERFACE)
1602 #define Intf_InRequest (Intf_Request | USB_DIR_IN)
1603 #define Ep_Request (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT)
1604 #define Ep_InRequest (Ep_Request | USB_DIR_IN)
1605
1606
1607 /**
1608 * handle_control_request() - handles all control transfers
1609 * @dum_hcd: pointer to dummy (the_controller)
1610 * @urb: the urb request to handle
1611 * @setup: pointer to the setup data for a USB device control
1612 * request
1613 * @status: pointer to request handling status
1614 *
1615 * Return 0 - if the request was handled
1616 * 1 - if the request wasn't handles
1617 * error code on error
1618 */
handle_control_request(struct dummy_hcd * dum_hcd,struct urb * urb,struct usb_ctrlrequest * setup,int * status)1619 static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb,
1620 struct usb_ctrlrequest *setup,
1621 int *status)
1622 {
1623 struct dummy_ep *ep2;
1624 struct dummy *dum = dum_hcd->dum;
1625 int ret_val = 1;
1626 unsigned w_index;
1627 unsigned w_value;
1628
1629 w_index = le16_to_cpu(setup->wIndex);
1630 w_value = le16_to_cpu(setup->wValue);
1631 switch (setup->bRequest) {
1632 case USB_REQ_SET_ADDRESS:
1633 if (setup->bRequestType != Dev_Request)
1634 break;
1635 dum->address = w_value;
1636 *status = 0;
1637 dev_dbg(udc_dev(dum), "set_address = %d\n",
1638 w_value);
1639 ret_val = 0;
1640 break;
1641 case USB_REQ_SET_FEATURE:
1642 if (setup->bRequestType == Dev_Request) {
1643 ret_val = 0;
1644 switch (w_value) {
1645 case USB_DEVICE_REMOTE_WAKEUP:
1646 break;
1647 case USB_DEVICE_B_HNP_ENABLE:
1648 dum->gadget.b_hnp_enable = 1;
1649 break;
1650 case USB_DEVICE_A_HNP_SUPPORT:
1651 dum->gadget.a_hnp_support = 1;
1652 break;
1653 case USB_DEVICE_A_ALT_HNP_SUPPORT:
1654 dum->gadget.a_alt_hnp_support = 1;
1655 break;
1656 case USB_DEVICE_U1_ENABLE:
1657 if (dummy_hcd_to_hcd(dum_hcd)->speed ==
1658 HCD_USB3)
1659 w_value = USB_DEV_STAT_U1_ENABLED;
1660 else
1661 ret_val = -EOPNOTSUPP;
1662 break;
1663 case USB_DEVICE_U2_ENABLE:
1664 if (dummy_hcd_to_hcd(dum_hcd)->speed ==
1665 HCD_USB3)
1666 w_value = USB_DEV_STAT_U2_ENABLED;
1667 else
1668 ret_val = -EOPNOTSUPP;
1669 break;
1670 case USB_DEVICE_LTM_ENABLE:
1671 if (dummy_hcd_to_hcd(dum_hcd)->speed ==
1672 HCD_USB3)
1673 w_value = USB_DEV_STAT_LTM_ENABLED;
1674 else
1675 ret_val = -EOPNOTSUPP;
1676 break;
1677 default:
1678 ret_val = -EOPNOTSUPP;
1679 }
1680 if (ret_val == 0) {
1681 dum->devstatus |= (1 << w_value);
1682 *status = 0;
1683 }
1684 } else if (setup->bRequestType == Ep_Request) {
1685 /* endpoint halt */
1686 ep2 = find_endpoint(dum, w_index);
1687 if (!ep2 || ep2->ep.name == ep0name) {
1688 ret_val = -EOPNOTSUPP;
1689 break;
1690 }
1691 ep2->halted = 1;
1692 ret_val = 0;
1693 *status = 0;
1694 }
1695 break;
1696 case USB_REQ_CLEAR_FEATURE:
1697 if (setup->bRequestType == Dev_Request) {
1698 ret_val = 0;
1699 switch (w_value) {
1700 case USB_DEVICE_REMOTE_WAKEUP:
1701 w_value = USB_DEVICE_REMOTE_WAKEUP;
1702 break;
1703 case USB_DEVICE_U1_ENABLE:
1704 if (dummy_hcd_to_hcd(dum_hcd)->speed ==
1705 HCD_USB3)
1706 w_value = USB_DEV_STAT_U1_ENABLED;
1707 else
1708 ret_val = -EOPNOTSUPP;
1709 break;
1710 case USB_DEVICE_U2_ENABLE:
1711 if (dummy_hcd_to_hcd(dum_hcd)->speed ==
1712 HCD_USB3)
1713 w_value = USB_DEV_STAT_U2_ENABLED;
1714 else
1715 ret_val = -EOPNOTSUPP;
1716 break;
1717 case USB_DEVICE_LTM_ENABLE:
1718 if (dummy_hcd_to_hcd(dum_hcd)->speed ==
1719 HCD_USB3)
1720 w_value = USB_DEV_STAT_LTM_ENABLED;
1721 else
1722 ret_val = -EOPNOTSUPP;
1723 break;
1724 default:
1725 ret_val = -EOPNOTSUPP;
1726 break;
1727 }
1728 if (ret_val == 0) {
1729 dum->devstatus &= ~(1 << w_value);
1730 *status = 0;
1731 }
1732 } else if (setup->bRequestType == Ep_Request) {
1733 /* endpoint halt */
1734 ep2 = find_endpoint(dum, w_index);
1735 if (!ep2) {
1736 ret_val = -EOPNOTSUPP;
1737 break;
1738 }
1739 if (!ep2->wedged)
1740 ep2->halted = 0;
1741 ret_val = 0;
1742 *status = 0;
1743 }
1744 break;
1745 case USB_REQ_GET_STATUS:
1746 if (setup->bRequestType == Dev_InRequest
1747 || setup->bRequestType == Intf_InRequest
1748 || setup->bRequestType == Ep_InRequest) {
1749 char *buf;
1750 /*
1751 * device: remote wakeup, selfpowered
1752 * interface: nothing
1753 * endpoint: halt
1754 */
1755 buf = (char *)urb->transfer_buffer;
1756 if (urb->transfer_buffer_length > 0) {
1757 if (setup->bRequestType == Ep_InRequest) {
1758 ep2 = find_endpoint(dum, w_index);
1759 if (!ep2) {
1760 ret_val = -EOPNOTSUPP;
1761 break;
1762 }
1763 buf[0] = ep2->halted;
1764 } else if (setup->bRequestType ==
1765 Dev_InRequest) {
1766 buf[0] = (u8)dum->devstatus;
1767 } else
1768 buf[0] = 0;
1769 }
1770 if (urb->transfer_buffer_length > 1)
1771 buf[1] = 0;
1772 urb->actual_length = min_t(u32, 2,
1773 urb->transfer_buffer_length);
1774 ret_val = 0;
1775 *status = 0;
1776 }
1777 break;
1778 }
1779 return ret_val;
1780 }
1781
1782 /*
1783 * Drive both sides of the transfers; looks like irq handlers to both
1784 * drivers except that the callbacks are invoked from soft interrupt
1785 * context.
1786 */
dummy_timer(struct hrtimer * t)1787 static enum hrtimer_restart dummy_timer(struct hrtimer *t)
1788 {
1789 struct dummy_hcd *dum_hcd = from_timer(dum_hcd, t, timer);
1790 struct dummy *dum = dum_hcd->dum;
1791 struct urbp *urbp, *tmp;
1792 unsigned long flags;
1793 int limit, total;
1794 int i;
1795
1796 /* simplistic model for one frame's bandwidth */
1797 /* FIXME: account for transaction and packet overhead */
1798 switch (dum->gadget.speed) {
1799 case USB_SPEED_LOW:
1800 total = 8/*bytes*/ * 12/*packets*/;
1801 break;
1802 case USB_SPEED_FULL:
1803 total = 64/*bytes*/ * 19/*packets*/;
1804 break;
1805 case USB_SPEED_HIGH:
1806 total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/;
1807 break;
1808 case USB_SPEED_SUPER:
1809 /* Bus speed is 500000 bytes/ms, so use a little less */
1810 total = 490000;
1811 break;
1812 default: /* Can't happen */
1813 dev_err(dummy_dev(dum_hcd), "bogus device speed\n");
1814 total = 0;
1815 break;
1816 }
1817
1818 /* look at each urb queued by the host side driver */
1819 spin_lock_irqsave(&dum->lock, flags);
1820 dum_hcd->timer_pending = 0;
1821
1822 if (!dum_hcd->udev) {
1823 dev_err(dummy_dev(dum_hcd),
1824 "timer fired with no URBs pending?\n");
1825 spin_unlock_irqrestore(&dum->lock, flags);
1826 return HRTIMER_NORESTART;
1827 }
1828 dum_hcd->next_frame_urbp = NULL;
1829
1830 for (i = 0; i < DUMMY_ENDPOINTS; i++) {
1831 if (!ep_info[i].name)
1832 break;
1833 dum->ep[i].already_seen = 0;
1834 }
1835
1836 restart:
1837 list_for_each_entry_safe(urbp, tmp, &dum_hcd->urbp_list, urbp_list) {
1838 struct urb *urb;
1839 struct dummy_request *req;
1840 u8 address;
1841 struct dummy_ep *ep = NULL;
1842 int status = -EINPROGRESS;
1843
1844 /* stop when we reach URBs queued after the timer interrupt */
1845 if (urbp == dum_hcd->next_frame_urbp)
1846 break;
1847
1848 urb = urbp->urb;
1849 if (urb->unlinked)
1850 goto return_urb;
1851 else if (dum_hcd->rh_state != DUMMY_RH_RUNNING)
1852 continue;
1853
1854 /* Used up this frame's bandwidth? */
1855 if (total <= 0)
1856 continue;
1857
1858 /* find the gadget's ep for this request (if configured) */
1859 address = usb_pipeendpoint (urb->pipe);
1860 if (usb_urb_dir_in(urb))
1861 address |= USB_DIR_IN;
1862 ep = find_endpoint(dum, address);
1863 if (!ep) {
1864 /* set_configuration() disagreement */
1865 dev_dbg(dummy_dev(dum_hcd),
1866 "no ep configured for urb %p\n",
1867 urb);
1868 status = -EPROTO;
1869 goto return_urb;
1870 }
1871
1872 if (ep->already_seen)
1873 continue;
1874 ep->already_seen = 1;
1875 if (ep == &dum->ep[0] && urb->error_count) {
1876 ep->setup_stage = 1; /* a new urb */
1877 urb->error_count = 0;
1878 }
1879 if (ep->halted && !ep->setup_stage) {
1880 /* NOTE: must not be iso! */
1881 dev_dbg(dummy_dev(dum_hcd), "ep %s halted, urb %p\n",
1882 ep->ep.name, urb);
1883 status = -EPIPE;
1884 goto return_urb;
1885 }
1886 /* FIXME make sure both ends agree on maxpacket */
1887
1888 /* handle control requests */
1889 if (ep == &dum->ep[0] && ep->setup_stage) {
1890 struct usb_ctrlrequest setup;
1891 int value;
1892
1893 setup = *(struct usb_ctrlrequest *) urb->setup_packet;
1894 /* paranoia, in case of stale queued data */
1895 list_for_each_entry(req, &ep->queue, queue) {
1896 list_del_init(&req->queue);
1897 req->req.status = -EOVERFLOW;
1898 dev_dbg(udc_dev(dum), "stale req = %p\n",
1899 req);
1900
1901 spin_unlock(&dum->lock);
1902 usb_gadget_giveback_request(&ep->ep, &req->req);
1903 spin_lock(&dum->lock);
1904 ep->already_seen = 0;
1905 goto restart;
1906 }
1907
1908 /* gadget driver never sees set_address or operations
1909 * on standard feature flags. some hardware doesn't
1910 * even expose them.
1911 */
1912 ep->last_io = jiffies;
1913 ep->setup_stage = 0;
1914 ep->halted = 0;
1915
1916 value = handle_control_request(dum_hcd, urb, &setup,
1917 &status);
1918
1919 /* gadget driver handles all other requests. block
1920 * until setup() returns; no reentrancy issues etc.
1921 */
1922 if (value > 0) {
1923 ++dum->callback_usage;
1924 spin_unlock(&dum->lock);
1925 value = dum->driver->setup(&dum->gadget,
1926 &setup);
1927 spin_lock(&dum->lock);
1928 --dum->callback_usage;
1929
1930 if (value >= 0) {
1931 /* no delays (max 64KB data stage) */
1932 limit = 64*1024;
1933 goto treat_control_like_bulk;
1934 }
1935 /* error, see below */
1936 }
1937
1938 if (value < 0) {
1939 if (value != -EOPNOTSUPP)
1940 dev_dbg(udc_dev(dum),
1941 "setup --> %d\n",
1942 value);
1943 status = -EPIPE;
1944 urb->actual_length = 0;
1945 }
1946
1947 goto return_urb;
1948 }
1949
1950 /* non-control requests */
1951 limit = total;
1952 switch (usb_pipetype(urb->pipe)) {
1953 case PIPE_ISOCHRONOUS:
1954 /*
1955 * We don't support isochronous. But if we did,
1956 * here are some of the issues we'd have to face:
1957 *
1958 * Is it urb->interval since the last xfer?
1959 * Use urb->iso_frame_desc[i].
1960 * Complete whether or not ep has requests queued.
1961 * Report random errors, to debug drivers.
1962 */
1963 limit = max(limit, periodic_bytes(dum, ep));
1964 status = -EINVAL; /* fail all xfers */
1965 break;
1966
1967 case PIPE_INTERRUPT:
1968 /* FIXME is it urb->interval since the last xfer?
1969 * this almost certainly polls too fast.
1970 */
1971 limit = max(limit, periodic_bytes(dum, ep));
1972 fallthrough;
1973
1974 default:
1975 treat_control_like_bulk:
1976 ep->last_io = jiffies;
1977 total -= transfer(dum_hcd, urb, ep, limit, &status);
1978 break;
1979 }
1980
1981 /* incomplete transfer? */
1982 if (status == -EINPROGRESS)
1983 continue;
1984
1985 return_urb:
1986 list_del(&urbp->urbp_list);
1987 kfree(urbp);
1988 if (ep)
1989 ep->already_seen = ep->setup_stage = 0;
1990
1991 usb_hcd_unlink_urb_from_ep(dummy_hcd_to_hcd(dum_hcd), urb);
1992 spin_unlock(&dum->lock);
1993 usb_hcd_giveback_urb(dummy_hcd_to_hcd(dum_hcd), urb, status);
1994 spin_lock(&dum->lock);
1995
1996 goto restart;
1997 }
1998
1999 if (list_empty(&dum_hcd->urbp_list)) {
2000 usb_put_dev(dum_hcd->udev);
2001 dum_hcd->udev = NULL;
2002 } else if (!dum_hcd->timer_pending &&
2003 dum_hcd->rh_state == DUMMY_RH_RUNNING) {
2004 /* want a 1 msec delay here */
2005 dum_hcd->timer_pending = 1;
2006 hrtimer_start(&dum_hcd->timer, ns_to_ktime(DUMMY_TIMER_INT_NSECS),
2007 HRTIMER_MODE_REL_SOFT);
2008 }
2009
2010 spin_unlock_irqrestore(&dum->lock, flags);
2011
2012 return HRTIMER_NORESTART;
2013 }
2014
2015 /*-------------------------------------------------------------------------*/
2016
2017 #define PORT_C_MASK \
2018 ((USB_PORT_STAT_C_CONNECTION \
2019 | USB_PORT_STAT_C_ENABLE \
2020 | USB_PORT_STAT_C_SUSPEND \
2021 | USB_PORT_STAT_C_OVERCURRENT \
2022 | USB_PORT_STAT_C_RESET) << 16)
2023
dummy_hub_status(struct usb_hcd * hcd,char * buf)2024 static int dummy_hub_status(struct usb_hcd *hcd, char *buf)
2025 {
2026 struct dummy_hcd *dum_hcd;
2027 unsigned long flags;
2028 int retval = 0;
2029
2030 dum_hcd = hcd_to_dummy_hcd(hcd);
2031
2032 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
2033 if (!HCD_HW_ACCESSIBLE(hcd))
2034 goto done;
2035
2036 if (dum_hcd->resuming && time_after_eq(jiffies, dum_hcd->re_timeout)) {
2037 dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
2038 dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
2039 set_link_state(dum_hcd);
2040 }
2041
2042 if ((dum_hcd->port_status & PORT_C_MASK) != 0) {
2043 *buf = (1 << 1);
2044 dev_dbg(dummy_dev(dum_hcd), "port status 0x%08x has changes\n",
2045 dum_hcd->port_status);
2046 retval = 1;
2047 if (dum_hcd->rh_state == DUMMY_RH_SUSPENDED)
2048 usb_hcd_resume_root_hub(hcd);
2049 }
2050 done:
2051 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
2052 return retval;
2053 }
2054
2055 /* usb 3.0 root hub device descriptor */
2056 static struct {
2057 struct usb_bos_descriptor bos;
2058 struct usb_ss_cap_descriptor ss_cap;
2059 } __packed usb3_bos_desc = {
2060
2061 .bos = {
2062 .bLength = USB_DT_BOS_SIZE,
2063 .bDescriptorType = USB_DT_BOS,
2064 .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)),
2065 .bNumDeviceCaps = 1,
2066 },
2067 .ss_cap = {
2068 .bLength = USB_DT_USB_SS_CAP_SIZE,
2069 .bDescriptorType = USB_DT_DEVICE_CAPABILITY,
2070 .bDevCapabilityType = USB_SS_CAP_TYPE,
2071 .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION),
2072 .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION),
2073 },
2074 };
2075
2076 static inline void
ss_hub_descriptor(struct usb_hub_descriptor * desc)2077 ss_hub_descriptor(struct usb_hub_descriptor *desc)
2078 {
2079 memset(desc, 0, sizeof *desc);
2080 desc->bDescriptorType = USB_DT_SS_HUB;
2081 desc->bDescLength = 12;
2082 desc->wHubCharacteristics = cpu_to_le16(
2083 HUB_CHAR_INDV_PORT_LPSM |
2084 HUB_CHAR_COMMON_OCPM);
2085 desc->bNbrPorts = 1;
2086 desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
2087 desc->u.ss.DeviceRemovable = 0;
2088 }
2089
hub_descriptor(struct usb_hub_descriptor * desc)2090 static inline void hub_descriptor(struct usb_hub_descriptor *desc)
2091 {
2092 memset(desc, 0, sizeof *desc);
2093 desc->bDescriptorType = USB_DT_HUB;
2094 desc->bDescLength = 9;
2095 desc->wHubCharacteristics = cpu_to_le16(
2096 HUB_CHAR_INDV_PORT_LPSM |
2097 HUB_CHAR_COMMON_OCPM);
2098 desc->bNbrPorts = 1;
2099 desc->u.hs.DeviceRemovable[0] = 0;
2100 desc->u.hs.DeviceRemovable[1] = 0xff; /* PortPwrCtrlMask */
2101 }
2102
dummy_hub_control(struct usb_hcd * hcd,u16 typeReq,u16 wValue,u16 wIndex,char * buf,u16 wLength)2103 static int dummy_hub_control(
2104 struct usb_hcd *hcd,
2105 u16 typeReq,
2106 u16 wValue,
2107 u16 wIndex,
2108 char *buf,
2109 u16 wLength
2110 ) {
2111 struct dummy_hcd *dum_hcd;
2112 int retval = 0;
2113 unsigned long flags;
2114
2115 if (!HCD_HW_ACCESSIBLE(hcd))
2116 return -ETIMEDOUT;
2117
2118 dum_hcd = hcd_to_dummy_hcd(hcd);
2119
2120 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
2121 switch (typeReq) {
2122 case ClearHubFeature:
2123 break;
2124 case ClearPortFeature:
2125 switch (wValue) {
2126 case USB_PORT_FEAT_SUSPEND:
2127 if (hcd->speed == HCD_USB3) {
2128 dev_dbg(dummy_dev(dum_hcd),
2129 "USB_PORT_FEAT_SUSPEND req not "
2130 "supported for USB 3.0 roothub\n");
2131 goto error;
2132 }
2133 if (dum_hcd->port_status & USB_PORT_STAT_SUSPEND) {
2134 /* 20msec resume signaling */
2135 dum_hcd->resuming = 1;
2136 dum_hcd->re_timeout = jiffies +
2137 msecs_to_jiffies(20);
2138 }
2139 break;
2140 case USB_PORT_FEAT_POWER:
2141 dev_dbg(dummy_dev(dum_hcd), "power-off\n");
2142 if (hcd->speed == HCD_USB3)
2143 dum_hcd->port_status &= ~USB_SS_PORT_STAT_POWER;
2144 else
2145 dum_hcd->port_status &= ~USB_PORT_STAT_POWER;
2146 set_link_state(dum_hcd);
2147 break;
2148 case USB_PORT_FEAT_ENABLE:
2149 case USB_PORT_FEAT_C_ENABLE:
2150 case USB_PORT_FEAT_C_SUSPEND:
2151 /* Not allowed for USB-3 */
2152 if (hcd->speed == HCD_USB3)
2153 goto error;
2154 fallthrough;
2155 case USB_PORT_FEAT_C_CONNECTION:
2156 case USB_PORT_FEAT_C_RESET:
2157 dum_hcd->port_status &= ~(1 << wValue);
2158 set_link_state(dum_hcd);
2159 break;
2160 default:
2161 /* Disallow INDICATOR and C_OVER_CURRENT */
2162 goto error;
2163 }
2164 break;
2165 case GetHubDescriptor:
2166 if (hcd->speed == HCD_USB3 &&
2167 (wLength < USB_DT_SS_HUB_SIZE ||
2168 wValue != (USB_DT_SS_HUB << 8))) {
2169 dev_dbg(dummy_dev(dum_hcd),
2170 "Wrong hub descriptor type for "
2171 "USB 3.0 roothub.\n");
2172 goto error;
2173 }
2174 if (hcd->speed == HCD_USB3)
2175 ss_hub_descriptor((struct usb_hub_descriptor *) buf);
2176 else
2177 hub_descriptor((struct usb_hub_descriptor *) buf);
2178 break;
2179
2180 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
2181 if (hcd->speed != HCD_USB3)
2182 goto error;
2183
2184 if ((wValue >> 8) != USB_DT_BOS)
2185 goto error;
2186
2187 memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
2188 retval = sizeof(usb3_bos_desc);
2189 break;
2190
2191 case GetHubStatus:
2192 *(__le32 *) buf = cpu_to_le32(0);
2193 break;
2194 case GetPortStatus:
2195 if (wIndex != 1)
2196 retval = -EPIPE;
2197
2198 /* whoever resets or resumes must GetPortStatus to
2199 * complete it!!
2200 */
2201 if (dum_hcd->resuming &&
2202 time_after_eq(jiffies, dum_hcd->re_timeout)) {
2203 dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
2204 dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
2205 }
2206 if ((dum_hcd->port_status & USB_PORT_STAT_RESET) != 0 &&
2207 time_after_eq(jiffies, dum_hcd->re_timeout)) {
2208 dum_hcd->port_status |= (USB_PORT_STAT_C_RESET << 16);
2209 dum_hcd->port_status &= ~USB_PORT_STAT_RESET;
2210 if (dum_hcd->dum->pullup) {
2211 dum_hcd->port_status |= USB_PORT_STAT_ENABLE;
2212
2213 if (hcd->speed < HCD_USB3) {
2214 switch (dum_hcd->dum->gadget.speed) {
2215 case USB_SPEED_HIGH:
2216 dum_hcd->port_status |=
2217 USB_PORT_STAT_HIGH_SPEED;
2218 break;
2219 case USB_SPEED_LOW:
2220 dum_hcd->dum->gadget.ep0->
2221 maxpacket = 8;
2222 dum_hcd->port_status |=
2223 USB_PORT_STAT_LOW_SPEED;
2224 break;
2225 default:
2226 break;
2227 }
2228 }
2229 }
2230 }
2231 set_link_state(dum_hcd);
2232 ((__le16 *) buf)[0] = cpu_to_le16(dum_hcd->port_status);
2233 ((__le16 *) buf)[1] = cpu_to_le16(dum_hcd->port_status >> 16);
2234 break;
2235 case SetHubFeature:
2236 retval = -EPIPE;
2237 break;
2238 case SetPortFeature:
2239 switch (wValue) {
2240 case USB_PORT_FEAT_LINK_STATE:
2241 if (hcd->speed != HCD_USB3) {
2242 dev_dbg(dummy_dev(dum_hcd),
2243 "USB_PORT_FEAT_LINK_STATE req not "
2244 "supported for USB 2.0 roothub\n");
2245 goto error;
2246 }
2247 /*
2248 * Since this is dummy we don't have an actual link so
2249 * there is nothing to do for the SET_LINK_STATE cmd
2250 */
2251 break;
2252 case USB_PORT_FEAT_U1_TIMEOUT:
2253 case USB_PORT_FEAT_U2_TIMEOUT:
2254 /* TODO: add suspend/resume support! */
2255 if (hcd->speed != HCD_USB3) {
2256 dev_dbg(dummy_dev(dum_hcd),
2257 "USB_PORT_FEAT_U1/2_TIMEOUT req not "
2258 "supported for USB 2.0 roothub\n");
2259 goto error;
2260 }
2261 break;
2262 case USB_PORT_FEAT_SUSPEND:
2263 /* Applicable only for USB2.0 hub */
2264 if (hcd->speed == HCD_USB3) {
2265 dev_dbg(dummy_dev(dum_hcd),
2266 "USB_PORT_FEAT_SUSPEND req not "
2267 "supported for USB 3.0 roothub\n");
2268 goto error;
2269 }
2270 if (dum_hcd->active) {
2271 dum_hcd->port_status |= USB_PORT_STAT_SUSPEND;
2272
2273 /* HNP would happen here; for now we
2274 * assume b_bus_req is always true.
2275 */
2276 set_link_state(dum_hcd);
2277 if (((1 << USB_DEVICE_B_HNP_ENABLE)
2278 & dum_hcd->dum->devstatus) != 0)
2279 dev_dbg(dummy_dev(dum_hcd),
2280 "no HNP yet!\n");
2281 }
2282 break;
2283 case USB_PORT_FEAT_POWER:
2284 if (hcd->speed == HCD_USB3)
2285 dum_hcd->port_status |= USB_SS_PORT_STAT_POWER;
2286 else
2287 dum_hcd->port_status |= USB_PORT_STAT_POWER;
2288 set_link_state(dum_hcd);
2289 break;
2290 case USB_PORT_FEAT_BH_PORT_RESET:
2291 /* Applicable only for USB3.0 hub */
2292 if (hcd->speed != HCD_USB3) {
2293 dev_dbg(dummy_dev(dum_hcd),
2294 "USB_PORT_FEAT_BH_PORT_RESET req not "
2295 "supported for USB 2.0 roothub\n");
2296 goto error;
2297 }
2298 fallthrough;
2299 case USB_PORT_FEAT_RESET:
2300 if (!(dum_hcd->port_status & USB_PORT_STAT_CONNECTION))
2301 break;
2302 /* if it's already enabled, disable */
2303 if (hcd->speed == HCD_USB3) {
2304 dum_hcd->port_status =
2305 (USB_SS_PORT_STAT_POWER |
2306 USB_PORT_STAT_CONNECTION |
2307 USB_PORT_STAT_RESET);
2308 } else {
2309 dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE
2310 | USB_PORT_STAT_LOW_SPEED
2311 | USB_PORT_STAT_HIGH_SPEED);
2312 dum_hcd->port_status |= USB_PORT_STAT_RESET;
2313 }
2314 /*
2315 * We want to reset device status. All but the
2316 * Self powered feature
2317 */
2318 dum_hcd->dum->devstatus &=
2319 (1 << USB_DEVICE_SELF_POWERED);
2320 /*
2321 * FIXME USB3.0: what is the correct reset signaling
2322 * interval? Is it still 50msec as for HS?
2323 */
2324 dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
2325 set_link_state(dum_hcd);
2326 break;
2327 case USB_PORT_FEAT_C_CONNECTION:
2328 case USB_PORT_FEAT_C_RESET:
2329 case USB_PORT_FEAT_C_ENABLE:
2330 case USB_PORT_FEAT_C_SUSPEND:
2331 /* Not allowed for USB-3, and ignored for USB-2 */
2332 if (hcd->speed == HCD_USB3)
2333 goto error;
2334 break;
2335 default:
2336 /* Disallow TEST, INDICATOR, and C_OVER_CURRENT */
2337 goto error;
2338 }
2339 break;
2340 case GetPortErrorCount:
2341 if (hcd->speed != HCD_USB3) {
2342 dev_dbg(dummy_dev(dum_hcd),
2343 "GetPortErrorCount req not "
2344 "supported for USB 2.0 roothub\n");
2345 goto error;
2346 }
2347 /* We'll always return 0 since this is a dummy hub */
2348 *(__le32 *) buf = cpu_to_le32(0);
2349 break;
2350 case SetHubDepth:
2351 if (hcd->speed != HCD_USB3) {
2352 dev_dbg(dummy_dev(dum_hcd),
2353 "SetHubDepth req not supported for "
2354 "USB 2.0 roothub\n");
2355 goto error;
2356 }
2357 break;
2358 default:
2359 dev_dbg(dummy_dev(dum_hcd),
2360 "hub control req%04x v%04x i%04x l%d\n",
2361 typeReq, wValue, wIndex, wLength);
2362 error:
2363 /* "protocol stall" on error */
2364 retval = -EPIPE;
2365 }
2366 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
2367
2368 if ((dum_hcd->port_status & PORT_C_MASK) != 0)
2369 usb_hcd_poll_rh_status(hcd);
2370 return retval;
2371 }
2372
dummy_bus_suspend(struct usb_hcd * hcd)2373 static int dummy_bus_suspend(struct usb_hcd *hcd)
2374 {
2375 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2376
2377 dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
2378
2379 spin_lock_irq(&dum_hcd->dum->lock);
2380 dum_hcd->rh_state = DUMMY_RH_SUSPENDED;
2381 set_link_state(dum_hcd);
2382 hcd->state = HC_STATE_SUSPENDED;
2383 spin_unlock_irq(&dum_hcd->dum->lock);
2384 return 0;
2385 }
2386
dummy_bus_resume(struct usb_hcd * hcd)2387 static int dummy_bus_resume(struct usb_hcd *hcd)
2388 {
2389 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2390 int rc = 0;
2391
2392 dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
2393
2394 spin_lock_irq(&dum_hcd->dum->lock);
2395 if (!HCD_HW_ACCESSIBLE(hcd)) {
2396 rc = -ESHUTDOWN;
2397 } else {
2398 dum_hcd->rh_state = DUMMY_RH_RUNNING;
2399 set_link_state(dum_hcd);
2400 if (!list_empty(&dum_hcd->urbp_list)) {
2401 dum_hcd->timer_pending = 1;
2402 hrtimer_start(&dum_hcd->timer, ns_to_ktime(0), HRTIMER_MODE_REL_SOFT);
2403 }
2404 hcd->state = HC_STATE_RUNNING;
2405 }
2406 spin_unlock_irq(&dum_hcd->dum->lock);
2407 return rc;
2408 }
2409
2410 /*-------------------------------------------------------------------------*/
2411
show_urb(char * buf,size_t size,struct urb * urb)2412 static inline ssize_t show_urb(char *buf, size_t size, struct urb *urb)
2413 {
2414 int ep = usb_pipeendpoint(urb->pipe);
2415
2416 return scnprintf(buf, size,
2417 "urb/%p %s ep%d%s%s len %d/%d\n",
2418 urb,
2419 ({ char *s;
2420 switch (urb->dev->speed) {
2421 case USB_SPEED_LOW:
2422 s = "ls";
2423 break;
2424 case USB_SPEED_FULL:
2425 s = "fs";
2426 break;
2427 case USB_SPEED_HIGH:
2428 s = "hs";
2429 break;
2430 case USB_SPEED_SUPER:
2431 s = "ss";
2432 break;
2433 default:
2434 s = "?";
2435 break;
2436 } s; }),
2437 ep, ep ? (usb_urb_dir_in(urb) ? "in" : "out") : "",
2438 ({ char *s; \
2439 switch (usb_pipetype(urb->pipe)) { \
2440 case PIPE_CONTROL: \
2441 s = ""; \
2442 break; \
2443 case PIPE_BULK: \
2444 s = "-bulk"; \
2445 break; \
2446 case PIPE_INTERRUPT: \
2447 s = "-int"; \
2448 break; \
2449 default: \
2450 s = "-iso"; \
2451 break; \
2452 } s; }),
2453 urb->actual_length, urb->transfer_buffer_length);
2454 }
2455
urbs_show(struct device * dev,struct device_attribute * attr,char * buf)2456 static ssize_t urbs_show(struct device *dev, struct device_attribute *attr,
2457 char *buf)
2458 {
2459 struct usb_hcd *hcd = dev_get_drvdata(dev);
2460 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2461 struct urbp *urbp;
2462 size_t size = 0;
2463 unsigned long flags;
2464
2465 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
2466 list_for_each_entry(urbp, &dum_hcd->urbp_list, urbp_list) {
2467 size_t temp;
2468
2469 temp = show_urb(buf, PAGE_SIZE - size, urbp->urb);
2470 buf += temp;
2471 size += temp;
2472 }
2473 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
2474
2475 return size;
2476 }
2477 static DEVICE_ATTR_RO(urbs);
2478
dummy_start_ss(struct dummy_hcd * dum_hcd)2479 static int dummy_start_ss(struct dummy_hcd *dum_hcd)
2480 {
2481 hrtimer_init(&dum_hcd->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT);
2482 dum_hcd->timer.function = dummy_timer;
2483 dum_hcd->rh_state = DUMMY_RH_RUNNING;
2484 dum_hcd->stream_en_ep = 0;
2485 INIT_LIST_HEAD(&dum_hcd->urbp_list);
2486 dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3;
2487 dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING;
2488 dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1;
2489 #ifdef CONFIG_USB_OTG
2490 dummy_hcd_to_hcd(dum_hcd)->self.otg_port = 1;
2491 #endif
2492 return 0;
2493
2494 /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
2495 return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs);
2496 }
2497
dummy_start(struct usb_hcd * hcd)2498 static int dummy_start(struct usb_hcd *hcd)
2499 {
2500 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2501
2502 /*
2503 * HOST side init ... we emulate a root hub that'll only ever
2504 * talk to one device (the gadget side). Also appears in sysfs,
2505 * just like more familiar pci-based HCDs.
2506 */
2507 if (!usb_hcd_is_primary_hcd(hcd))
2508 return dummy_start_ss(dum_hcd);
2509
2510 spin_lock_init(&dum_hcd->dum->lock);
2511 hrtimer_init(&dum_hcd->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_SOFT);
2512 dum_hcd->timer.function = dummy_timer;
2513 dum_hcd->rh_state = DUMMY_RH_RUNNING;
2514
2515 INIT_LIST_HEAD(&dum_hcd->urbp_list);
2516
2517 hcd->power_budget = POWER_BUDGET;
2518 hcd->state = HC_STATE_RUNNING;
2519 hcd->uses_new_polling = 1;
2520
2521 #ifdef CONFIG_USB_OTG
2522 hcd->self.otg_port = 1;
2523 #endif
2524
2525 /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
2526 return device_create_file(dummy_dev(dum_hcd), &dev_attr_urbs);
2527 }
2528
dummy_stop(struct usb_hcd * hcd)2529 static void dummy_stop(struct usb_hcd *hcd)
2530 {
2531 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2532
2533 hrtimer_cancel(&dum_hcd->timer);
2534 dum_hcd->timer_pending = 0;
2535 device_remove_file(dummy_dev(dum_hcd), &dev_attr_urbs);
2536 dev_info(dummy_dev(dum_hcd), "stopped\n");
2537 }
2538
2539 /*-------------------------------------------------------------------------*/
2540
dummy_h_get_frame(struct usb_hcd * hcd)2541 static int dummy_h_get_frame(struct usb_hcd *hcd)
2542 {
2543 return dummy_g_get_frame(NULL);
2544 }
2545
dummy_setup(struct usb_hcd * hcd)2546 static int dummy_setup(struct usb_hcd *hcd)
2547 {
2548 struct dummy *dum;
2549
2550 dum = *((void **)dev_get_platdata(hcd->self.controller));
2551 hcd->self.sg_tablesize = ~0;
2552 if (usb_hcd_is_primary_hcd(hcd)) {
2553 dum->hs_hcd = hcd_to_dummy_hcd(hcd);
2554 dum->hs_hcd->dum = dum;
2555 /*
2556 * Mark the first roothub as being USB 2.0.
2557 * The USB 3.0 roothub will be registered later by
2558 * dummy_hcd_probe()
2559 */
2560 hcd->speed = HCD_USB2;
2561 hcd->self.root_hub->speed = USB_SPEED_HIGH;
2562 } else {
2563 dum->ss_hcd = hcd_to_dummy_hcd(hcd);
2564 dum->ss_hcd->dum = dum;
2565 hcd->speed = HCD_USB3;
2566 hcd->self.root_hub->speed = USB_SPEED_SUPER;
2567 }
2568 return 0;
2569 }
2570
2571 /* Change a group of bulk endpoints to support multiple stream IDs */
dummy_alloc_streams(struct usb_hcd * hcd,struct usb_device * udev,struct usb_host_endpoint ** eps,unsigned int num_eps,unsigned int num_streams,gfp_t mem_flags)2572 static int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
2573 struct usb_host_endpoint **eps, unsigned int num_eps,
2574 unsigned int num_streams, gfp_t mem_flags)
2575 {
2576 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2577 unsigned long flags;
2578 int max_stream;
2579 int ret_streams = num_streams;
2580 unsigned int index;
2581 unsigned int i;
2582
2583 if (!num_eps)
2584 return -EINVAL;
2585
2586 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
2587 for (i = 0; i < num_eps; i++) {
2588 index = dummy_get_ep_idx(&eps[i]->desc);
2589 if ((1 << index) & dum_hcd->stream_en_ep) {
2590 ret_streams = -EINVAL;
2591 goto out;
2592 }
2593 max_stream = usb_ss_max_streams(&eps[i]->ss_ep_comp);
2594 if (!max_stream) {
2595 ret_streams = -EINVAL;
2596 goto out;
2597 }
2598 if (max_stream < ret_streams) {
2599 dev_dbg(dummy_dev(dum_hcd), "Ep 0x%x only supports %u "
2600 "stream IDs.\n",
2601 eps[i]->desc.bEndpointAddress,
2602 max_stream);
2603 ret_streams = max_stream;
2604 }
2605 }
2606
2607 for (i = 0; i < num_eps; i++) {
2608 index = dummy_get_ep_idx(&eps[i]->desc);
2609 dum_hcd->stream_en_ep |= 1 << index;
2610 set_max_streams_for_pipe(dum_hcd,
2611 usb_endpoint_num(&eps[i]->desc), ret_streams);
2612 }
2613 out:
2614 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
2615 return ret_streams;
2616 }
2617
2618 /* Reverts a group of bulk endpoints back to not using stream IDs. */
dummy_free_streams(struct usb_hcd * hcd,struct usb_device * udev,struct usb_host_endpoint ** eps,unsigned int num_eps,gfp_t mem_flags)2619 static int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
2620 struct usb_host_endpoint **eps, unsigned int num_eps,
2621 gfp_t mem_flags)
2622 {
2623 struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
2624 unsigned long flags;
2625 int ret;
2626 unsigned int index;
2627 unsigned int i;
2628
2629 spin_lock_irqsave(&dum_hcd->dum->lock, flags);
2630 for (i = 0; i < num_eps; i++) {
2631 index = dummy_get_ep_idx(&eps[i]->desc);
2632 if (!((1 << index) & dum_hcd->stream_en_ep)) {
2633 ret = -EINVAL;
2634 goto out;
2635 }
2636 }
2637
2638 for (i = 0; i < num_eps; i++) {
2639 index = dummy_get_ep_idx(&eps[i]->desc);
2640 dum_hcd->stream_en_ep &= ~(1 << index);
2641 set_max_streams_for_pipe(dum_hcd,
2642 usb_endpoint_num(&eps[i]->desc), 0);
2643 }
2644 ret = 0;
2645 out:
2646 spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
2647 return ret;
2648 }
2649
2650 static struct hc_driver dummy_hcd = {
2651 .description = (char *) driver_name,
2652 .product_desc = "Dummy host controller",
2653 .hcd_priv_size = sizeof(struct dummy_hcd),
2654
2655 .reset = dummy_setup,
2656 .start = dummy_start,
2657 .stop = dummy_stop,
2658
2659 .urb_enqueue = dummy_urb_enqueue,
2660 .urb_dequeue = dummy_urb_dequeue,
2661
2662 .get_frame_number = dummy_h_get_frame,
2663
2664 .hub_status_data = dummy_hub_status,
2665 .hub_control = dummy_hub_control,
2666 .bus_suspend = dummy_bus_suspend,
2667 .bus_resume = dummy_bus_resume,
2668
2669 .alloc_streams = dummy_alloc_streams,
2670 .free_streams = dummy_free_streams,
2671 };
2672
dummy_hcd_probe(struct platform_device * pdev)2673 static int dummy_hcd_probe(struct platform_device *pdev)
2674 {
2675 struct dummy *dum;
2676 struct usb_hcd *hs_hcd;
2677 struct usb_hcd *ss_hcd;
2678 int retval;
2679
2680 dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
2681 dum = *((void **)dev_get_platdata(&pdev->dev));
2682
2683 if (mod_data.is_super_speed)
2684 dummy_hcd.flags = HCD_USB3 | HCD_SHARED;
2685 else if (mod_data.is_high_speed)
2686 dummy_hcd.flags = HCD_USB2;
2687 else
2688 dummy_hcd.flags = HCD_USB11;
2689 hs_hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev));
2690 if (!hs_hcd)
2691 return -ENOMEM;
2692 hs_hcd->has_tt = 1;
2693
2694 retval = usb_add_hcd(hs_hcd, 0, 0);
2695 if (retval)
2696 goto put_usb2_hcd;
2697
2698 if (mod_data.is_super_speed) {
2699 ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
2700 dev_name(&pdev->dev), hs_hcd);
2701 if (!ss_hcd) {
2702 retval = -ENOMEM;
2703 goto dealloc_usb2_hcd;
2704 }
2705
2706 retval = usb_add_hcd(ss_hcd, 0, 0);
2707 if (retval)
2708 goto put_usb3_hcd;
2709 }
2710 return 0;
2711
2712 put_usb3_hcd:
2713 usb_put_hcd(ss_hcd);
2714 dealloc_usb2_hcd:
2715 usb_remove_hcd(hs_hcd);
2716 put_usb2_hcd:
2717 usb_put_hcd(hs_hcd);
2718 dum->hs_hcd = dum->ss_hcd = NULL;
2719 return retval;
2720 }
2721
dummy_hcd_remove(struct platform_device * pdev)2722 static void dummy_hcd_remove(struct platform_device *pdev)
2723 {
2724 struct dummy *dum;
2725
2726 dum = hcd_to_dummy_hcd(platform_get_drvdata(pdev))->dum;
2727
2728 if (dum->ss_hcd) {
2729 usb_remove_hcd(dummy_hcd_to_hcd(dum->ss_hcd));
2730 usb_put_hcd(dummy_hcd_to_hcd(dum->ss_hcd));
2731 }
2732
2733 usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
2734 usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd));
2735
2736 dum->hs_hcd = NULL;
2737 dum->ss_hcd = NULL;
2738 }
2739
dummy_hcd_suspend(struct platform_device * pdev,pm_message_t state)2740 static int dummy_hcd_suspend(struct platform_device *pdev, pm_message_t state)
2741 {
2742 struct usb_hcd *hcd;
2743 struct dummy_hcd *dum_hcd;
2744 int rc = 0;
2745
2746 dev_dbg(&pdev->dev, "%s\n", __func__);
2747
2748 hcd = platform_get_drvdata(pdev);
2749 dum_hcd = hcd_to_dummy_hcd(hcd);
2750 if (dum_hcd->rh_state == DUMMY_RH_RUNNING) {
2751 dev_warn(&pdev->dev, "Root hub isn't suspended!\n");
2752 rc = -EBUSY;
2753 } else
2754 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2755 return rc;
2756 }
2757
dummy_hcd_resume(struct platform_device * pdev)2758 static int dummy_hcd_resume(struct platform_device *pdev)
2759 {
2760 struct usb_hcd *hcd;
2761
2762 dev_dbg(&pdev->dev, "%s\n", __func__);
2763
2764 hcd = platform_get_drvdata(pdev);
2765 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
2766 usb_hcd_poll_rh_status(hcd);
2767 return 0;
2768 }
2769
2770 static struct platform_driver dummy_hcd_driver = {
2771 .probe = dummy_hcd_probe,
2772 .remove = dummy_hcd_remove,
2773 .suspend = dummy_hcd_suspend,
2774 .resume = dummy_hcd_resume,
2775 .driver = {
2776 .name = driver_name,
2777 },
2778 };
2779
2780 /*-------------------------------------------------------------------------*/
2781 #define MAX_NUM_UDC 32
2782 static struct platform_device *the_udc_pdev[MAX_NUM_UDC];
2783 static struct platform_device *the_hcd_pdev[MAX_NUM_UDC];
2784
dummy_hcd_init(void)2785 static int __init dummy_hcd_init(void)
2786 {
2787 int retval = -ENOMEM;
2788 int i;
2789 struct dummy *dum[MAX_NUM_UDC] = {};
2790
2791 if (usb_disabled())
2792 return -ENODEV;
2793
2794 if (!mod_data.is_high_speed && mod_data.is_super_speed)
2795 return -EINVAL;
2796
2797 if (mod_data.num < 1 || mod_data.num > MAX_NUM_UDC) {
2798 pr_err("Number of emulated UDC must be in range of 1...%d\n",
2799 MAX_NUM_UDC);
2800 return -EINVAL;
2801 }
2802
2803 for (i = 0; i < mod_data.num; i++) {
2804 the_hcd_pdev[i] = platform_device_alloc(driver_name, i);
2805 if (!the_hcd_pdev[i]) {
2806 i--;
2807 while (i >= 0)
2808 platform_device_put(the_hcd_pdev[i--]);
2809 return retval;
2810 }
2811 }
2812 for (i = 0; i < mod_data.num; i++) {
2813 the_udc_pdev[i] = platform_device_alloc(gadget_name, i);
2814 if (!the_udc_pdev[i]) {
2815 i--;
2816 while (i >= 0)
2817 platform_device_put(the_udc_pdev[i--]);
2818 goto err_alloc_udc;
2819 }
2820 }
2821 for (i = 0; i < mod_data.num; i++) {
2822 dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL);
2823 if (!dum[i]) {
2824 retval = -ENOMEM;
2825 goto err_add_pdata;
2826 }
2827 retval = platform_device_add_data(the_hcd_pdev[i], &dum[i],
2828 sizeof(void *));
2829 if (retval)
2830 goto err_add_pdata;
2831 retval = platform_device_add_data(the_udc_pdev[i], &dum[i],
2832 sizeof(void *));
2833 if (retval)
2834 goto err_add_pdata;
2835 }
2836
2837 retval = platform_driver_register(&dummy_hcd_driver);
2838 if (retval < 0)
2839 goto err_add_pdata;
2840 retval = platform_driver_register(&dummy_udc_driver);
2841 if (retval < 0)
2842 goto err_register_udc_driver;
2843
2844 for (i = 0; i < mod_data.num; i++) {
2845 retval = platform_device_add(the_hcd_pdev[i]);
2846 if (retval < 0) {
2847 i--;
2848 while (i >= 0)
2849 platform_device_del(the_hcd_pdev[i--]);
2850 goto err_add_hcd;
2851 }
2852 }
2853 for (i = 0; i < mod_data.num; i++) {
2854 if (!dum[i]->hs_hcd ||
2855 (!dum[i]->ss_hcd && mod_data.is_super_speed)) {
2856 /*
2857 * The hcd was added successfully but its probe
2858 * function failed for some reason.
2859 */
2860 retval = -EINVAL;
2861 goto err_add_udc;
2862 }
2863 }
2864
2865 for (i = 0; i < mod_data.num; i++) {
2866 retval = platform_device_add(the_udc_pdev[i]);
2867 if (retval < 0) {
2868 i--;
2869 while (i >= 0)
2870 platform_device_del(the_udc_pdev[i--]);
2871 goto err_add_udc;
2872 }
2873 }
2874
2875 for (i = 0; i < mod_data.num; i++) {
2876 if (!platform_get_drvdata(the_udc_pdev[i])) {
2877 /*
2878 * The udc was added successfully but its probe
2879 * function failed for some reason.
2880 */
2881 retval = -EINVAL;
2882 goto err_probe_udc;
2883 }
2884 }
2885 return retval;
2886
2887 err_probe_udc:
2888 for (i = 0; i < mod_data.num; i++)
2889 platform_device_del(the_udc_pdev[i]);
2890 err_add_udc:
2891 for (i = 0; i < mod_data.num; i++)
2892 platform_device_del(the_hcd_pdev[i]);
2893 err_add_hcd:
2894 platform_driver_unregister(&dummy_udc_driver);
2895 err_register_udc_driver:
2896 platform_driver_unregister(&dummy_hcd_driver);
2897 err_add_pdata:
2898 for (i = 0; i < mod_data.num; i++)
2899 kfree(dum[i]);
2900 for (i = 0; i < mod_data.num; i++)
2901 platform_device_put(the_udc_pdev[i]);
2902 err_alloc_udc:
2903 for (i = 0; i < mod_data.num; i++)
2904 platform_device_put(the_hcd_pdev[i]);
2905 return retval;
2906 }
2907 module_init(dummy_hcd_init);
2908
dummy_hcd_cleanup(void)2909 static void __exit dummy_hcd_cleanup(void)
2910 {
2911 int i;
2912
2913 for (i = 0; i < mod_data.num; i++) {
2914 struct dummy *dum;
2915
2916 dum = *((void **)dev_get_platdata(&the_udc_pdev[i]->dev));
2917
2918 platform_device_unregister(the_udc_pdev[i]);
2919 platform_device_unregister(the_hcd_pdev[i]);
2920 kfree(dum);
2921 }
2922 platform_driver_unregister(&dummy_udc_driver);
2923 platform_driver_unregister(&dummy_hcd_driver);
2924 }
2925 module_exit(dummy_hcd_cleanup);
2926