xref: /linux/include/linux/platform_data/mlxreg.h (revision 9a87ffc99ec8eb8d35eed7c4f816d75f5cc9662e)
1 /* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
2 /*
3  * Copyright (C) 2017-2020 Mellanox Technologies Ltd.
4  */
5 
6 #ifndef __LINUX_PLATFORM_DATA_MLXREG_H
7 #define __LINUX_PLATFORM_DATA_MLXREG_H
8 
9 #define MLXREG_CORE_LABEL_MAX_SIZE	32
10 #define MLXREG_CORE_WD_FEATURE_NOWAYOUT		BIT(0)
11 #define MLXREG_CORE_WD_FEATURE_START_AT_BOOT	BIT(1)
12 
13 /**
14  * enum mlxreg_wdt_type - type of HW watchdog
15  *
16  * TYPE1 HW watchdog implementation exist in old systems.
17  * All new systems have TYPE2 HW watchdog.
18  * TYPE3 HW watchdog can exist on all systems with new CPLD.
19  * TYPE3 is selected by WD capability bit.
20  */
21 enum mlxreg_wdt_type {
22 	MLX_WDT_TYPE1,
23 	MLX_WDT_TYPE2,
24 	MLX_WDT_TYPE3,
25 };
26 
27 /**
28  * enum mlxreg_hotplug_kind - kind of hotplug entry
29  *
30  * @MLXREG_HOTPLUG_DEVICE_NA: do not care;
31  * @MLXREG_HOTPLUG_LC_PRESENT: entry for line card presence in/out events;
32  * @MLXREG_HOTPLUG_LC_VERIFIED: entry for line card verification status events
33  *				coming after line card security signature validation;
34  * @MLXREG_HOTPLUG_LC_POWERED: entry for line card power on/off events;
35  * @MLXREG_HOTPLUG_LC_SYNCED: entry for line card synchronization events, coming
36  *			      after hardware-firmware synchronization handshake;
37  * @MLXREG_HOTPLUG_LC_READY: entry for line card ready events, indicating line card
38 			     PHYs ready / unready state;
39  * @MLXREG_HOTPLUG_LC_ACTIVE: entry for line card active events, indicating firmware
40  *			      availability / unavailability for the ports on line card;
41  * @MLXREG_HOTPLUG_LC_THERMAL: entry for line card thermal shutdown events, positive
42  *			       event indicates that system should power off the line
43  *			       card for which this event has been received;
44  */
45 enum mlxreg_hotplug_kind {
46 	MLXREG_HOTPLUG_DEVICE_NA = 0,
47 	MLXREG_HOTPLUG_LC_PRESENT = 1,
48 	MLXREG_HOTPLUG_LC_VERIFIED = 2,
49 	MLXREG_HOTPLUG_LC_POWERED = 3,
50 	MLXREG_HOTPLUG_LC_SYNCED = 4,
51 	MLXREG_HOTPLUG_LC_READY = 5,
52 	MLXREG_HOTPLUG_LC_ACTIVE = 6,
53 	MLXREG_HOTPLUG_LC_THERMAL = 7,
54 };
55 
56 /**
57  * enum mlxreg_hotplug_device_action - hotplug device action required for
58  *				       driver's connectivity
59  *
60  * @MLXREG_HOTPLUG_DEVICE_DEFAULT_ACTION: probe device for 'on' event, remove
61  *					  for 'off' event;
62  * @MLXREG_HOTPLUG_DEVICE_PLATFORM_ACTION: probe platform device for 'on'
63  *					   event, remove for 'off' event;
64  * @MLXREG_HOTPLUG_DEVICE_NO_ACTION: no connectivity action is required;
65  */
66 enum mlxreg_hotplug_device_action {
67 	MLXREG_HOTPLUG_DEVICE_DEFAULT_ACTION = 0,
68 	MLXREG_HOTPLUG_DEVICE_PLATFORM_ACTION = 1,
69 	MLXREG_HOTPLUG_DEVICE_NO_ACTION = 2,
70 };
71 
72 /**
73  * struct mlxreg_core_hotplug_notifier - hotplug notifier block:
74  *
75  * @identity: notifier identity name;
76  * @handle: user handle to be passed by user handler function;
77  * @user_handler: user handler function associated with the event;
78  */
79 struct mlxreg_core_hotplug_notifier {
80 	char identity[MLXREG_CORE_LABEL_MAX_SIZE];
81 	void *handle;
82 	int (*user_handler)(void *handle, enum mlxreg_hotplug_kind kind, u8 action);
83 };
84 
85 /**
86  * struct mlxreg_hotplug_device - I2C device data:
87  *
88  * @adapter: I2C device adapter;
89  * @client: I2C device client;
90  * @brdinfo: device board information;
91  * @nr: I2C device adapter number, to which device is to be attached;
92  * @pdev: platform device, if device is instantiated as a platform device;
93  * @action: action to be performed upon event receiving;
94  * @handle: user handle to be passed by user handler function;
95  * @user_handler: user handler function associated with the event;
96  * @notifier: pointer to event notifier block;
97  *
98  * Structure represents I2C hotplug device static data (board topology) and
99  * dynamic data (related kernel objects handles).
100  */
101 struct mlxreg_hotplug_device {
102 	struct i2c_adapter *adapter;
103 	struct i2c_client *client;
104 	struct i2c_board_info *brdinfo;
105 	int nr;
106 	struct platform_device *pdev;
107 	enum mlxreg_hotplug_device_action action;
108 	void *handle;
109 	int (*user_handler)(void *handle, enum mlxreg_hotplug_kind kind, u8 action);
110 	struct mlxreg_core_hotplug_notifier *notifier;
111 };
112 
113 /**
114  * struct mlxreg_core_data - attributes control data:
115  *
116  * @label: attribute label;
117  * @reg: attribute register;
118  * @mask: attribute access mask;
119  * @bit: attribute effective bit;
120  * @capability: attribute capability register;
121  * @reg_prsnt: attribute presence register;
122  * @reg_sync: attribute synch register;
123  * @reg_pwr: attribute power register;
124  * @reg_ena: attribute enable register;
125  * @mode: access mode;
126  * @np - pointer to node platform associated with attribute;
127  * @hpdev - hotplug device data;
128  * @notifier: pointer to event notifier block;
129  * @health_cntr: dynamic device health indication counter;
130  * @attached: true if device has been attached after good health indication;
131  * @regnum: number of registers occupied by multi-register attribute;
132  * @slot: slot number, at which device is located;
133  * @secured: if set indicates that entry access is secured;
134  */
135 struct mlxreg_core_data {
136 	char label[MLXREG_CORE_LABEL_MAX_SIZE];
137 	u32 reg;
138 	u32 mask;
139 	u32 bit;
140 	u32 capability;
141 	u32 reg_prsnt;
142 	u32 reg_sync;
143 	u32 reg_pwr;
144 	u32 reg_ena;
145 	umode_t	mode;
146 	struct device_node *np;
147 	struct mlxreg_hotplug_device hpdev;
148 	struct mlxreg_core_hotplug_notifier *notifier;
149 	u32 health_cntr;
150 	bool attached;
151 	u8 regnum;
152 	u8 slot;
153 	u8 secured;
154 };
155 
156 /**
157  * struct mlxreg_core_item - same type components controlled by the driver:
158  *
159  * @data: component data;
160  * @kind: kind of hotplug attribute;
161  * @aggr_mask: group aggregation mask;
162  * @reg: group interrupt status register;
163  * @mask: group interrupt mask;
164  * @capability: group capability register;
165  * @cache: last status value for elements fro the same group;
166  * @count: number of available elements in the group;
167  * @ind: element's index inside the group;
168  * @inversed: if 0: 0 for signal status is OK, if 1 - 1 is OK;
169  * @health: true if device has health indication, false in other case;
170  */
171 struct mlxreg_core_item {
172 	struct mlxreg_core_data *data;
173 	enum mlxreg_hotplug_kind kind;
174 	u32 aggr_mask;
175 	u32 reg;
176 	u32 mask;
177 	u32 capability;
178 	u32 cache;
179 	u8 count;
180 	u8 ind;
181 	u8 inversed;
182 	u8 health;
183 };
184 
185 /**
186  * struct mlxreg_core_platform_data - platform data:
187  *
188  * @data: instance private data;
189  * @regmap: register map of parent device;
190  * @counter: number of instances;
191  * @features: supported features of device;
192  * @version: implementation version;
193  * @identity: device identity name;
194  * @capability: device capability register;
195  */
196 struct mlxreg_core_platform_data {
197 	struct mlxreg_core_data *data;
198 	void *regmap;
199 	int counter;
200 	u32 features;
201 	u32 version;
202 	char identity[MLXREG_CORE_LABEL_MAX_SIZE];
203 	u32 capability;
204 };
205 
206 /**
207  * struct mlxreg_core_hotplug_platform_data - hotplug platform data:
208  *
209  * @items: same type components with the hotplug capability;
210  * @irq: platform interrupt number;
211  * @regmap: register map of parent device;
212  * @counter: number of the components with the hotplug capability;
213  * @cell: location of top aggregation interrupt register;
214  * @mask: top aggregation interrupt common mask;
215  * @cell_low: location of low aggregation interrupt register;
216  * @mask_low: low aggregation interrupt common mask;
217  * @deferred_nr: I2C adapter number must be exist prior probing execution;
218  * @shift_nr: I2C adapter numbers must be incremented by this value;
219  * @addr: mapped resource address;
220  * @handle: handle to be passed by callback;
221  * @completion_notify: callback to notify when platform driver probing is done;
222  */
223 struct mlxreg_core_hotplug_platform_data {
224 	struct mlxreg_core_item *items;
225 	int irq;
226 	void *regmap;
227 	int counter;
228 	u32 cell;
229 	u32 mask;
230 	u32 cell_low;
231 	u32 mask_low;
232 	int deferred_nr;
233 	int shift_nr;
234 	void __iomem *addr;
235 	void *handle;
236 	int (*completion_notify)(void *handle, int id);
237 };
238 
239 #endif /* __LINUX_PLATFORM_DATA_MLXREG_H */
240