xref: /linux/drivers/reset/reset-ti-syscon.c (revision a1c613ae4c322ddd58d5a8539dbfba2a0380a8c0)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * TI SYSCON regmap reset driver
4  *
5  * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
6  *	Andrew F. Davis <afd@ti.com>
7  *	Suman Anna <afd@ti.com>
8  */
9 
10 #include <linux/mfd/syscon.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/platform_device.h>
14 #include <linux/regmap.h>
15 #include <linux/reset-controller.h>
16 
17 #include <dt-bindings/reset/ti-syscon.h>
18 
19 /**
20  * struct ti_syscon_reset_control - reset control structure
21  * @assert_offset: reset assert control register offset from syscon base
22  * @assert_bit: reset assert bit in the reset assert control register
23  * @deassert_offset: reset deassert control register offset from syscon base
24  * @deassert_bit: reset deassert bit in the reset deassert control register
25  * @status_offset: reset status register offset from syscon base
26  * @status_bit: reset status bit in the reset status register
27  * @flags: reset flag indicating how the (de)assert and status are handled
28  */
29 struct ti_syscon_reset_control {
30 	unsigned int assert_offset;
31 	unsigned int assert_bit;
32 	unsigned int deassert_offset;
33 	unsigned int deassert_bit;
34 	unsigned int status_offset;
35 	unsigned int status_bit;
36 	u32 flags;
37 };
38 
39 /**
40  * struct ti_syscon_reset_data - reset controller information structure
41  * @rcdev: reset controller entity
42  * @regmap: regmap handle containing the memory-mapped reset registers
43  * @controls: array of reset controls
44  * @nr_controls: number of controls in control array
45  */
46 struct ti_syscon_reset_data {
47 	struct reset_controller_dev rcdev;
48 	struct regmap *regmap;
49 	struct ti_syscon_reset_control *controls;
50 	unsigned int nr_controls;
51 };
52 
53 #define to_ti_syscon_reset_data(_rcdev)	\
54 	container_of(_rcdev, struct ti_syscon_reset_data, rcdev)
55 
56 /**
57  * ti_syscon_reset_assert() - assert device reset
58  * @rcdev: reset controller entity
59  * @id: ID of the reset to be asserted
60  *
61  * This function implements the reset driver op to assert a device's reset.
62  * This asserts the reset in a manner prescribed by the reset flags.
63  *
64  * Return: 0 for successful request, else a corresponding error value
65  */
ti_syscon_reset_assert(struct reset_controller_dev * rcdev,unsigned long id)66 static int ti_syscon_reset_assert(struct reset_controller_dev *rcdev,
67 				  unsigned long id)
68 {
69 	struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev);
70 	struct ti_syscon_reset_control *control;
71 	unsigned int mask, value;
72 
73 	if (id >= data->nr_controls)
74 		return -EINVAL;
75 
76 	control = &data->controls[id];
77 
78 	if (control->flags & ASSERT_NONE)
79 		return -ENOTSUPP; /* assert not supported for this reset */
80 
81 	mask = BIT(control->assert_bit);
82 	value = (control->flags & ASSERT_SET) ? mask : 0x0;
83 
84 	return regmap_write_bits(data->regmap, control->assert_offset, mask, value);
85 }
86 
87 /**
88  * ti_syscon_reset_deassert() - deassert device reset
89  * @rcdev: reset controller entity
90  * @id: ID of reset to be deasserted
91  *
92  * This function implements the reset driver op to deassert a device's reset.
93  * This deasserts the reset in a manner prescribed by the reset flags.
94  *
95  * Return: 0 for successful request, else a corresponding error value
96  */
ti_syscon_reset_deassert(struct reset_controller_dev * rcdev,unsigned long id)97 static int ti_syscon_reset_deassert(struct reset_controller_dev *rcdev,
98 				    unsigned long id)
99 {
100 	struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev);
101 	struct ti_syscon_reset_control *control;
102 	unsigned int mask, value;
103 
104 	if (id >= data->nr_controls)
105 		return -EINVAL;
106 
107 	control = &data->controls[id];
108 
109 	if (control->flags & DEASSERT_NONE)
110 		return -ENOTSUPP; /* deassert not supported for this reset */
111 
112 	mask = BIT(control->deassert_bit);
113 	value = (control->flags & DEASSERT_SET) ? mask : 0x0;
114 
115 	return regmap_write_bits(data->regmap, control->deassert_offset, mask, value);
116 }
117 
118 /**
119  * ti_syscon_reset_status() - check device reset status
120  * @rcdev: reset controller entity
121  * @id: ID of the reset for which the status is being requested
122  *
123  * This function implements the reset driver op to return the status of a
124  * device's reset.
125  *
126  * Return: 0 if reset is deasserted, true if reset is asserted, else a
127  * corresponding error value
128  */
ti_syscon_reset_status(struct reset_controller_dev * rcdev,unsigned long id)129 static int ti_syscon_reset_status(struct reset_controller_dev *rcdev,
130 				  unsigned long id)
131 {
132 	struct ti_syscon_reset_data *data = to_ti_syscon_reset_data(rcdev);
133 	struct ti_syscon_reset_control *control;
134 	unsigned int reset_state;
135 	int ret;
136 
137 	if (id >= data->nr_controls)
138 		return -EINVAL;
139 
140 	control = &data->controls[id];
141 
142 	if (control->flags & STATUS_NONE)
143 		return -ENOTSUPP; /* status not supported for this reset */
144 
145 	ret = regmap_read(data->regmap, control->status_offset, &reset_state);
146 	if (ret)
147 		return ret;
148 
149 	return !(reset_state & BIT(control->status_bit)) ==
150 		!(control->flags & STATUS_SET);
151 }
152 
153 static const struct reset_control_ops ti_syscon_reset_ops = {
154 	.assert		= ti_syscon_reset_assert,
155 	.deassert	= ti_syscon_reset_deassert,
156 	.status		= ti_syscon_reset_status,
157 };
158 
ti_syscon_reset_probe(struct platform_device * pdev)159 static int ti_syscon_reset_probe(struct platform_device *pdev)
160 {
161 	struct device *dev = &pdev->dev;
162 	struct device_node *np = dev->of_node;
163 	struct ti_syscon_reset_data *data;
164 	struct regmap *regmap;
165 	const __be32 *list;
166 	struct ti_syscon_reset_control *controls;
167 	int size, nr_controls, i;
168 
169 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
170 	if (!data)
171 		return -ENOMEM;
172 
173 	regmap = syscon_node_to_regmap(np->parent);
174 	if (IS_ERR(regmap))
175 		return PTR_ERR(regmap);
176 
177 	list = of_get_property(np, "ti,reset-bits", &size);
178 	if (!list || (size / sizeof(*list)) % 7 != 0) {
179 		dev_err(dev, "invalid DT reset description\n");
180 		return -EINVAL;
181 	}
182 
183 	nr_controls = (size / sizeof(*list)) / 7;
184 	controls = devm_kcalloc(dev, nr_controls, sizeof(*controls),
185 				GFP_KERNEL);
186 	if (!controls)
187 		return -ENOMEM;
188 
189 	for (i = 0; i < nr_controls; i++) {
190 		controls[i].assert_offset = be32_to_cpup(list++);
191 		controls[i].assert_bit = be32_to_cpup(list++);
192 		controls[i].deassert_offset = be32_to_cpup(list++);
193 		controls[i].deassert_bit = be32_to_cpup(list++);
194 		controls[i].status_offset = be32_to_cpup(list++);
195 		controls[i].status_bit = be32_to_cpup(list++);
196 		controls[i].flags = be32_to_cpup(list++);
197 	}
198 
199 	data->rcdev.ops = &ti_syscon_reset_ops;
200 	data->rcdev.owner = THIS_MODULE;
201 	data->rcdev.of_node = np;
202 	data->rcdev.nr_resets = nr_controls;
203 	data->regmap = regmap;
204 	data->controls = controls;
205 	data->nr_controls = nr_controls;
206 
207 	return devm_reset_controller_register(dev, &data->rcdev);
208 }
209 
210 static const struct of_device_id ti_syscon_reset_of_match[] = {
211 	{ .compatible = "ti,syscon-reset", },
212 	{ /* sentinel */ },
213 };
214 MODULE_DEVICE_TABLE(of, ti_syscon_reset_of_match);
215 
216 static struct platform_driver ti_syscon_reset_driver = {
217 	.probe = ti_syscon_reset_probe,
218 	.driver = {
219 		.name = "ti-syscon-reset",
220 		.of_match_table = ti_syscon_reset_of_match,
221 	},
222 };
223 module_platform_driver(ti_syscon_reset_driver);
224 
225 MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
226 MODULE_AUTHOR("Suman Anna <s-anna@ti.com>");
227 MODULE_DESCRIPTION("TI SYSCON Regmap Reset Driver");
228 MODULE_LICENSE("GPL v2");
229