1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (c) 2019, The Linaro Limited. All rights reserved.
4 */
5 #include <linux/coresight.h>
6 #include <linux/device.h>
7 #include <linux/err.h>
8 #include <linux/of.h>
9 #include <linux/property.h>
10 #include <linux/slab.h>
11
12 #include <dt-bindings/arm/coresight-cti-dt.h>
13
14 #include "coresight-cti.h"
15 #include "coresight-priv.h"
16
17 /* Number of CTI signals in the v8 architecturally defined connection */
18 #define NR_V8PE_IN_SIGS 2
19 #define NR_V8PE_OUT_SIGS 3
20 #define NR_V8ETM_INOUT_SIGS 4
21
22 /* CTI device tree trigger connection node keyword */
23 #define CTI_DT_CONNS "trig-conns"
24
25 /* CTI device tree connection property keywords */
26 #define CTI_DT_V8ARCH_COMPAT "arm,coresight-cti-v8-arch"
27 #define CTI_DT_CSDEV_ASSOC "arm,cs-dev-assoc"
28 #define CTI_DT_TRIGIN_SIGS "arm,trig-in-sigs"
29 #define CTI_DT_TRIGOUT_SIGS "arm,trig-out-sigs"
30 #define CTI_DT_TRIGIN_TYPES "arm,trig-in-types"
31 #define CTI_DT_TRIGOUT_TYPES "arm,trig-out-types"
32 #define CTI_DT_FILTER_OUT_SIGS "arm,trig-filters"
33 #define CTI_DT_CONN_NAME "arm,trig-conn-name"
34 #define CTI_DT_CTM_ID "arm,cti-ctm-id"
35
36 #ifdef CONFIG_OF
37 /*
38 * CTI can be bound to a CPU, or a system device.
39 * CPU can be declared at the device top level or in a connections node
40 * so need to check relative to node not device.
41 */
of_cti_get_cpu_at_node(const struct device_node * node)42 static int of_cti_get_cpu_at_node(const struct device_node *node)
43 {
44 int cpu;
45 struct device_node *dn;
46
47 if (node == NULL)
48 return -1;
49
50 dn = of_parse_phandle(node, "cpu", 0);
51 /* CTI affinity defaults to no cpu */
52 if (!dn)
53 return -1;
54 cpu = of_cpu_node_to_id(dn);
55 of_node_put(dn);
56
57 /* No Affinity if no cpu nodes are found */
58 return (cpu < 0) ? -1 : cpu;
59 }
60
61 #else
of_cti_get_cpu_at_node(const struct device_node * node)62 static int of_cti_get_cpu_at_node(const struct device_node *node)
63 {
64 return -1;
65 }
66
67 #endif
68
69 /*
70 * CTI can be bound to a CPU, or a system device.
71 * CPU can be declared at the device top level or in a connections node
72 * so need to check relative to node not device.
73 */
cti_plat_get_cpu_at_node(struct fwnode_handle * fwnode)74 static int cti_plat_get_cpu_at_node(struct fwnode_handle *fwnode)
75 {
76 if (is_of_node(fwnode))
77 return of_cti_get_cpu_at_node(to_of_node(fwnode));
78 return -1;
79 }
80
cti_plat_get_node_name(struct fwnode_handle * fwnode)81 const char *cti_plat_get_node_name(struct fwnode_handle *fwnode)
82 {
83 if (is_of_node(fwnode))
84 return of_node_full_name(to_of_node(fwnode));
85 return "unknown";
86 }
87
88 /*
89 * Extract a name from the fwnode.
90 * If the device associated with the node is a coresight_device, then return
91 * that name and the coresight_device pointer, otherwise return the node name.
92 */
93 static const char *
cti_plat_get_csdev_or_node_name(struct fwnode_handle * fwnode,struct coresight_device ** csdev)94 cti_plat_get_csdev_or_node_name(struct fwnode_handle *fwnode,
95 struct coresight_device **csdev)
96 {
97 const char *name = NULL;
98 *csdev = coresight_find_csdev_by_fwnode(fwnode);
99 if (*csdev)
100 name = dev_name(&(*csdev)->dev);
101 else
102 name = cti_plat_get_node_name(fwnode);
103 return name;
104 }
105
cti_plat_node_name_eq(struct fwnode_handle * fwnode,const char * name)106 static bool cti_plat_node_name_eq(struct fwnode_handle *fwnode,
107 const char *name)
108 {
109 if (is_of_node(fwnode))
110 return of_node_name_eq(to_of_node(fwnode), name);
111 return false;
112 }
113
cti_plat_create_v8_etm_connection(struct device * dev,struct cti_drvdata * drvdata)114 static int cti_plat_create_v8_etm_connection(struct device *dev,
115 struct cti_drvdata *drvdata)
116 {
117 int ret = -ENOMEM, i;
118 struct fwnode_handle *root_fwnode, *cs_fwnode;
119 const char *assoc_name = NULL;
120 struct coresight_device *csdev;
121 struct cti_trig_con *tc = NULL;
122
123 root_fwnode = dev_fwnode(dev);
124 if (IS_ERR_OR_NULL(root_fwnode))
125 return -EINVAL;
126
127 /* Can optionally have an etm node - return if not */
128 cs_fwnode = fwnode_find_reference(root_fwnode, CTI_DT_CSDEV_ASSOC, 0);
129 if (IS_ERR(cs_fwnode))
130 return 0;
131
132 /* allocate memory */
133 tc = cti_allocate_trig_con(dev, NR_V8ETM_INOUT_SIGS,
134 NR_V8ETM_INOUT_SIGS);
135 if (!tc)
136 goto create_v8_etm_out;
137
138 /* build connection data */
139 tc->con_in->used_mask = 0xF0; /* sigs <4,5,6,7> */
140 tc->con_out->used_mask = 0xF0; /* sigs <4,5,6,7> */
141
142 /*
143 * The EXTOUT type signals from the ETM are connected to a set of input
144 * triggers on the CTI, the EXTIN being connected to output triggers.
145 */
146 for (i = 0; i < NR_V8ETM_INOUT_SIGS; i++) {
147 tc->con_in->sig_types[i] = ETM_EXTOUT;
148 tc->con_out->sig_types[i] = ETM_EXTIN;
149 }
150
151 /*
152 * We look to see if the ETM coresight device associated with this
153 * handle has been registered with the system - i.e. probed before
154 * this CTI. If so csdev will be non NULL and we can use the device
155 * name and pass the csdev to the connection entry function where
156 * the association will be recorded.
157 * If not, then simply record the name in the connection data, the
158 * probing of the ETM will call into the CTI driver API to update the
159 * association then.
160 */
161 assoc_name = cti_plat_get_csdev_or_node_name(cs_fwnode, &csdev);
162 ret = cti_add_connection_entry(dev, drvdata, tc, csdev, assoc_name);
163
164 create_v8_etm_out:
165 fwnode_handle_put(cs_fwnode);
166 return ret;
167 }
168
169 /*
170 * Create an architecturally defined v8 connection
171 * must have a cpu, can have an ETM.
172 */
cti_plat_create_v8_connections(struct device * dev,struct cti_drvdata * drvdata)173 static int cti_plat_create_v8_connections(struct device *dev,
174 struct cti_drvdata *drvdata)
175 {
176 struct cti_device *cti_dev = &drvdata->ctidev;
177 struct cti_trig_con *tc = NULL;
178 int cpuid = 0;
179 char cpu_name_str[16];
180 int ret = -ENOMEM;
181
182 /* Must have a cpu node */
183 cpuid = cti_plat_get_cpu_at_node(dev_fwnode(dev));
184 if (cpuid < 0) {
185 dev_warn(dev,
186 "ARM v8 architectural CTI connection: missing cpu\n");
187 return -EINVAL;
188 }
189 cti_dev->cpu = cpuid;
190
191 /* Allocate the v8 cpu connection memory */
192 tc = cti_allocate_trig_con(dev, NR_V8PE_IN_SIGS, NR_V8PE_OUT_SIGS);
193 if (!tc)
194 goto of_create_v8_out;
195
196 /* Set the v8 PE CTI connection data */
197 tc->con_in->used_mask = 0x3; /* sigs <0 1> */
198 tc->con_in->sig_types[0] = PE_DBGTRIGGER;
199 tc->con_in->sig_types[1] = PE_PMUIRQ;
200 tc->con_out->used_mask = 0x7; /* sigs <0 1 2 > */
201 tc->con_out->sig_types[0] = PE_EDBGREQ;
202 tc->con_out->sig_types[1] = PE_DBGRESTART;
203 tc->con_out->sig_types[2] = PE_CTIIRQ;
204 scnprintf(cpu_name_str, sizeof(cpu_name_str), "cpu%d", cpuid);
205
206 ret = cti_add_connection_entry(dev, drvdata, tc, NULL, cpu_name_str);
207 if (ret)
208 goto of_create_v8_out;
209
210 /* Create the v8 ETM associated connection */
211 ret = cti_plat_create_v8_etm_connection(dev, drvdata);
212 if (ret)
213 goto of_create_v8_out;
214
215 /* filter pe_edbgreq - PE trigout sig <0> */
216 drvdata->config.trig_out_filter |= 0x1;
217
218 of_create_v8_out:
219 return ret;
220 }
221
cti_plat_check_v8_arch_compatible(struct device * dev)222 static int cti_plat_check_v8_arch_compatible(struct device *dev)
223 {
224 struct fwnode_handle *fwnode = dev_fwnode(dev);
225
226 if (is_of_node(fwnode))
227 return of_device_is_compatible(to_of_node(fwnode),
228 CTI_DT_V8ARCH_COMPAT);
229 return 0;
230 }
231
cti_plat_count_sig_elements(const struct fwnode_handle * fwnode,const char * name)232 static int cti_plat_count_sig_elements(const struct fwnode_handle *fwnode,
233 const char *name)
234 {
235 int nr_elem = fwnode_property_count_u32(fwnode, name);
236
237 return (nr_elem < 0 ? 0 : nr_elem);
238 }
239
cti_plat_read_trig_group(struct cti_trig_grp * tgrp,const struct fwnode_handle * fwnode,const char * grp_name)240 static int cti_plat_read_trig_group(struct cti_trig_grp *tgrp,
241 const struct fwnode_handle *fwnode,
242 const char *grp_name)
243 {
244 int idx, err = 0;
245 u32 *values;
246
247 if (!tgrp->nr_sigs)
248 return 0;
249
250 values = kcalloc(tgrp->nr_sigs, sizeof(u32), GFP_KERNEL);
251 if (!values)
252 return -ENOMEM;
253
254 err = fwnode_property_read_u32_array(fwnode, grp_name,
255 values, tgrp->nr_sigs);
256
257 if (!err) {
258 /* set the signal usage mask */
259 for (idx = 0; idx < tgrp->nr_sigs; idx++)
260 tgrp->used_mask |= BIT(values[idx]);
261 }
262
263 kfree(values);
264 return err;
265 }
266
cti_plat_read_trig_types(struct cti_trig_grp * tgrp,const struct fwnode_handle * fwnode,const char * type_name)267 static int cti_plat_read_trig_types(struct cti_trig_grp *tgrp,
268 const struct fwnode_handle *fwnode,
269 const char *type_name)
270 {
271 int items, err = 0, nr_sigs;
272 u32 *values = NULL, i;
273
274 /* allocate an array according to number of signals in connection */
275 nr_sigs = tgrp->nr_sigs;
276 if (!nr_sigs)
277 return 0;
278
279 /* see if any types have been included in the device description */
280 items = cti_plat_count_sig_elements(fwnode, type_name);
281 if (items > nr_sigs)
282 return -EINVAL;
283
284 /* need an array to store the values iff there are any */
285 if (items) {
286 values = kcalloc(items, sizeof(u32), GFP_KERNEL);
287 if (!values)
288 return -ENOMEM;
289
290 err = fwnode_property_read_u32_array(fwnode, type_name,
291 values, items);
292 if (err)
293 goto read_trig_types_out;
294 }
295
296 /*
297 * Match type id to signal index, 1st type to 1st index etc.
298 * If fewer types than signals default remainder to GEN_IO.
299 */
300 for (i = 0; i < nr_sigs; i++) {
301 if (i < items) {
302 tgrp->sig_types[i] =
303 values[i] < CTI_TRIG_MAX ? values[i] : GEN_IO;
304 } else {
305 tgrp->sig_types[i] = GEN_IO;
306 }
307 }
308
309 read_trig_types_out:
310 kfree(values);
311 return err;
312 }
313
cti_plat_process_filter_sigs(struct cti_drvdata * drvdata,const struct fwnode_handle * fwnode)314 static int cti_plat_process_filter_sigs(struct cti_drvdata *drvdata,
315 const struct fwnode_handle *fwnode)
316 {
317 struct cti_trig_grp *tg = NULL;
318 int err = 0, nr_filter_sigs;
319
320 nr_filter_sigs = cti_plat_count_sig_elements(fwnode,
321 CTI_DT_FILTER_OUT_SIGS);
322 if (nr_filter_sigs == 0)
323 return 0;
324
325 if (nr_filter_sigs > drvdata->config.nr_trig_max)
326 return -EINVAL;
327
328 tg = kzalloc(sizeof(*tg), GFP_KERNEL);
329 if (!tg)
330 return -ENOMEM;
331
332 err = cti_plat_read_trig_group(tg, fwnode, CTI_DT_FILTER_OUT_SIGS);
333 if (!err)
334 drvdata->config.trig_out_filter |= tg->used_mask;
335
336 kfree(tg);
337 return err;
338 }
339
cti_plat_create_connection(struct device * dev,struct cti_drvdata * drvdata,struct fwnode_handle * fwnode)340 static int cti_plat_create_connection(struct device *dev,
341 struct cti_drvdata *drvdata,
342 struct fwnode_handle *fwnode)
343 {
344 struct cti_trig_con *tc = NULL;
345 int cpuid = -1, err = 0;
346 struct coresight_device *csdev = NULL;
347 const char *assoc_name = "unknown";
348 char cpu_name_str[16];
349 int nr_sigs_in, nr_sigs_out;
350
351 /* look to see how many in and out signals we have */
352 nr_sigs_in = cti_plat_count_sig_elements(fwnode, CTI_DT_TRIGIN_SIGS);
353 nr_sigs_out = cti_plat_count_sig_elements(fwnode, CTI_DT_TRIGOUT_SIGS);
354
355 if ((nr_sigs_in > drvdata->config.nr_trig_max) ||
356 (nr_sigs_out > drvdata->config.nr_trig_max))
357 return -EINVAL;
358
359 tc = cti_allocate_trig_con(dev, nr_sigs_in, nr_sigs_out);
360 if (!tc)
361 return -ENOMEM;
362
363 /* look for the signals properties. */
364 err = cti_plat_read_trig_group(tc->con_in, fwnode,
365 CTI_DT_TRIGIN_SIGS);
366 if (err)
367 goto create_con_err;
368
369 err = cti_plat_read_trig_types(tc->con_in, fwnode,
370 CTI_DT_TRIGIN_TYPES);
371 if (err)
372 goto create_con_err;
373
374 err = cti_plat_read_trig_group(tc->con_out, fwnode,
375 CTI_DT_TRIGOUT_SIGS);
376 if (err)
377 goto create_con_err;
378
379 err = cti_plat_read_trig_types(tc->con_out, fwnode,
380 CTI_DT_TRIGOUT_TYPES);
381 if (err)
382 goto create_con_err;
383
384 err = cti_plat_process_filter_sigs(drvdata, fwnode);
385 if (err)
386 goto create_con_err;
387
388 /* read the connection name if set - may be overridden by later */
389 fwnode_property_read_string(fwnode, CTI_DT_CONN_NAME, &assoc_name);
390
391 /* associated cpu ? */
392 cpuid = cti_plat_get_cpu_at_node(fwnode);
393 if (cpuid >= 0) {
394 drvdata->ctidev.cpu = cpuid;
395 scnprintf(cpu_name_str, sizeof(cpu_name_str), "cpu%d", cpuid);
396 assoc_name = cpu_name_str;
397 } else {
398 /* associated device ? */
399 struct fwnode_handle *cs_fwnode = fwnode_find_reference(fwnode,
400 CTI_DT_CSDEV_ASSOC,
401 0);
402 if (!IS_ERR(cs_fwnode)) {
403 assoc_name = cti_plat_get_csdev_or_node_name(cs_fwnode,
404 &csdev);
405 fwnode_handle_put(cs_fwnode);
406 }
407 }
408 /* set up a connection */
409 err = cti_add_connection_entry(dev, drvdata, tc, csdev, assoc_name);
410
411 create_con_err:
412 return err;
413 }
414
cti_plat_create_impdef_connections(struct device * dev,struct cti_drvdata * drvdata)415 static int cti_plat_create_impdef_connections(struct device *dev,
416 struct cti_drvdata *drvdata)
417 {
418 int rc = 0;
419
420 if (IS_ERR_OR_NULL(dev_fwnode(dev)))
421 return -EINVAL;
422
423 device_for_each_child_node_scoped(dev, child) {
424 if (cti_plat_node_name_eq(child, CTI_DT_CONNS))
425 rc = cti_plat_create_connection(dev, drvdata, child);
426 if (rc != 0)
427 break;
428 }
429
430 return rc;
431 }
432
433 /* get the hardware configuration & connection data. */
cti_plat_get_hw_data(struct device * dev,struct cti_drvdata * drvdata)434 static int cti_plat_get_hw_data(struct device *dev, struct cti_drvdata *drvdata)
435 {
436 int rc = 0;
437 struct cti_device *cti_dev = &drvdata->ctidev;
438
439 /* get any CTM ID - defaults to 0 */
440 device_property_read_u32(dev, CTI_DT_CTM_ID, &cti_dev->ctm_id);
441
442 /* check for a v8 architectural CTI device */
443 if (cti_plat_check_v8_arch_compatible(dev))
444 rc = cti_plat_create_v8_connections(dev, drvdata);
445 else
446 rc = cti_plat_create_impdef_connections(dev, drvdata);
447 if (rc)
448 return rc;
449
450 /* if no connections, just add a single default based on max IN-OUT */
451 if (cti_dev->nr_trig_con == 0)
452 rc = cti_add_default_connection(dev, drvdata);
453 return rc;
454 }
455
456 struct coresight_platform_data *
coresight_cti_get_platform_data(struct device * dev)457 coresight_cti_get_platform_data(struct device *dev)
458 {
459 int ret = -ENOENT;
460 struct coresight_platform_data *pdata = NULL;
461 struct fwnode_handle *fwnode = dev_fwnode(dev);
462 struct cti_drvdata *drvdata = dev_get_drvdata(dev);
463
464 if (IS_ERR_OR_NULL(fwnode))
465 goto error;
466
467 /*
468 * Alloc platform data but leave it zero init. CTI does not use the
469 * same connection infrastructuree as trace path components but an
470 * empty struct enables us to use the standard coresight component
471 * registration code.
472 */
473 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
474 if (!pdata) {
475 ret = -ENOMEM;
476 goto error;
477 }
478
479 /* get some CTI specifics */
480 ret = cti_plat_get_hw_data(dev, drvdata);
481
482 if (!ret)
483 return pdata;
484 error:
485 return ERR_PTR(ret);
486 }
487