xref: /linux/drivers/usb/musb/omap2430.c (revision 1ac731c529cd4d6adbce134754b51ff7d822b145)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2005-2007 by Texas Instruments
4  * Some code has been taken from tusb6010.c
5  * Copyrights for that are attributable to:
6  * Copyright (C) 2006 Nokia Corporation
7  * Tony Lindgren <tony@atomide.com>
8  *
9  * This file is part of the Inventra Controller Driver for Linux.
10  */
11 #include <linux/module.h>
12 #include <linux/kernel.h>
13 #include <linux/sched.h>
14 #include <linux/init.h>
15 #include <linux/list.h>
16 #include <linux/io.h>
17 #include <linux/of.h>
18 #include <linux/of_irq.h>
19 #include <linux/platform_device.h>
20 #include <linux/dma-mapping.h>
21 #include <linux/pm_runtime.h>
22 #include <linux/err.h>
23 #include <linux/delay.h>
24 #include <linux/usb/musb.h>
25 #include <linux/phy/omap_control_phy.h>
26 #include <linux/of_platform.h>
27 
28 #include "musb_core.h"
29 #include "omap2430.h"
30 
31 struct omap2430_glue {
32 	struct device		*dev;
33 	struct platform_device	*musb;
34 	enum musb_vbus_id_status status;
35 	struct work_struct	omap_musb_mailbox_work;
36 	struct device		*control_otghs;
37 	unsigned int		is_runtime_suspended:1;
38 	unsigned int		needs_resume:1;
39 	unsigned int		phy_suspended:1;
40 };
41 #define glue_to_musb(g)		platform_get_drvdata(g->musb)
42 
43 static struct omap2430_glue	*_glue;
44 
omap2430_low_level_exit(struct musb * musb)45 static inline void omap2430_low_level_exit(struct musb *musb)
46 {
47 	u32 l;
48 
49 	/* in any role */
50 	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
51 	l |= ENABLEFORCE;	/* enable MSTANDBY */
52 	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
53 }
54 
omap2430_low_level_init(struct musb * musb)55 static inline void omap2430_low_level_init(struct musb *musb)
56 {
57 	u32 l;
58 
59 	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
60 	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
61 	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
62 }
63 
omap2430_musb_mailbox(enum musb_vbus_id_status status)64 static int omap2430_musb_mailbox(enum musb_vbus_id_status status)
65 {
66 	struct omap2430_glue	*glue = _glue;
67 
68 	if (!glue) {
69 		pr_err("%s: musb core is not yet initialized\n", __func__);
70 		return -EPROBE_DEFER;
71 	}
72 	glue->status = status;
73 
74 	if (!glue_to_musb(glue)) {
75 		pr_err("%s: musb core is not yet ready\n", __func__);
76 		return -EPROBE_DEFER;
77 	}
78 
79 	schedule_work(&glue->omap_musb_mailbox_work);
80 
81 	return 0;
82 }
83 
84 /*
85  * HDRC controls CPEN, but beware current surges during device connect.
86  * They can trigger transient overcurrent conditions that must be ignored.
87  *
88  * Note that we're skipping A_WAIT_VFALL -> A_IDLE and jumping right to B_IDLE
89  * as set by musb_set_peripheral().
90  */
omap_musb_set_mailbox(struct omap2430_glue * glue)91 static void omap_musb_set_mailbox(struct omap2430_glue *glue)
92 {
93 	struct musb *musb = glue_to_musb(glue);
94 	int error;
95 
96 	pm_runtime_get_sync(musb->controller);
97 
98 	dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
99 		usb_otg_state_string(musb->xceiv->otg->state),
100 		musb_readb(musb->mregs, MUSB_DEVCTL));
101 
102 	switch (glue->status) {
103 	case MUSB_ID_GROUND:
104 		dev_dbg(musb->controller, "ID GND\n");
105 		switch (musb->xceiv->otg->state) {
106 		case OTG_STATE_A_IDLE:
107 			error = musb_set_host(musb);
108 			if (error)
109 				break;
110 			musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
111 			fallthrough;
112 		case OTG_STATE_A_WAIT_VRISE:
113 		case OTG_STATE_A_WAIT_BCON:
114 		case OTG_STATE_A_HOST:
115 			/*
116 			 * On multiple ID ground interrupts just keep enabling
117 			 * VBUS. At least cpcap VBUS shuts down otherwise.
118 			 */
119 			otg_set_vbus(musb->xceiv->otg, 1);
120 			break;
121 		default:
122 			musb->xceiv->otg->state = OTG_STATE_A_IDLE;
123 			musb->xceiv->last_event = USB_EVENT_ID;
124 			if (musb->gadget_driver) {
125 				omap_control_usb_set_mode(glue->control_otghs,
126 							  USB_MODE_HOST);
127 				otg_set_vbus(musb->xceiv->otg, 1);
128 			}
129 			break;
130 		}
131 		break;
132 
133 	case MUSB_VBUS_VALID:
134 		dev_dbg(musb->controller, "VBUS Connect\n");
135 
136 		musb->xceiv->otg->state = OTG_STATE_B_IDLE;
137 		musb->xceiv->last_event = USB_EVENT_VBUS;
138 		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
139 		break;
140 
141 	case MUSB_ID_FLOAT:
142 	case MUSB_VBUS_OFF:
143 		dev_dbg(musb->controller, "VBUS Disconnect\n");
144 
145 		musb->xceiv->last_event = USB_EVENT_NONE;
146 		musb_set_peripheral(musb);
147 		otg_set_vbus(musb->xceiv->otg, 0);
148 		omap_control_usb_set_mode(glue->control_otghs,
149 			USB_MODE_DISCONNECT);
150 		break;
151 	default:
152 		dev_dbg(musb->controller, "ID float\n");
153 	}
154 	pm_runtime_mark_last_busy(musb->controller);
155 	pm_runtime_put_autosuspend(musb->controller);
156 	atomic_notifier_call_chain(&musb->xceiv->notifier,
157 			musb->xceiv->last_event, NULL);
158 }
159 
160 
omap_musb_mailbox_work(struct work_struct * mailbox_work)161 static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
162 {
163 	struct omap2430_glue *glue = container_of(mailbox_work,
164 				struct omap2430_glue, omap_musb_mailbox_work);
165 
166 	omap_musb_set_mailbox(glue);
167 }
168 
omap2430_musb_interrupt(int irq,void * __hci)169 static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
170 {
171 	unsigned long   flags;
172 	irqreturn_t     retval = IRQ_NONE;
173 	struct musb     *musb = __hci;
174 
175 	spin_lock_irqsave(&musb->lock, flags);
176 
177 	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
178 	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
179 	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
180 
181 	if (musb->int_usb || musb->int_tx || musb->int_rx)
182 		retval = musb_interrupt(musb);
183 
184 	spin_unlock_irqrestore(&musb->lock, flags);
185 
186 	return retval;
187 }
188 
omap2430_musb_init(struct musb * musb)189 static int omap2430_musb_init(struct musb *musb)
190 {
191 	u32 l;
192 	int status = 0;
193 	struct device *dev = musb->controller;
194 	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
195 	struct omap_musb_board_data *data = plat->board_data;
196 
197 	/* We require some kind of external transceiver, hooked
198 	 * up through ULPI.  TWL4030-family PMICs include one,
199 	 * which needs a driver, drivers aren't always needed.
200 	 */
201 	musb->phy = devm_phy_get(dev->parent, "usb2-phy");
202 
203 	/* We can't totally remove musb->xceiv as of now because
204 	 * musb core uses xceiv.state and xceiv.otg. Once we have
205 	 * a separate state machine to handle otg, these can be moved
206 	 * out of xceiv and then we can start using the generic PHY
207 	 * framework
208 	 */
209 	musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0);
210 
211 	if (IS_ERR(musb->xceiv)) {
212 		status = PTR_ERR(musb->xceiv);
213 
214 		if (status == -ENXIO)
215 			return status;
216 
217 		dev_dbg(dev, "HS USB OTG: no transceiver configured\n");
218 		return -EPROBE_DEFER;
219 	}
220 
221 	if (IS_ERR(musb->phy)) {
222 		dev_err(dev, "HS USB OTG: no PHY configured\n");
223 		return PTR_ERR(musb->phy);
224 	}
225 	musb->isr = omap2430_musb_interrupt;
226 	phy_init(musb->phy);
227 	phy_power_on(musb->phy);
228 
229 	l = musb_readl(musb->mregs, OTG_INTERFSEL);
230 
231 	if (data->interface_type == MUSB_INTERFACE_UTMI) {
232 		/* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
233 		l &= ~ULPI_12PIN;       /* Disable ULPI */
234 		l |= UTMI_8BIT;         /* Enable UTMI  */
235 	} else {
236 		l |= ULPI_12PIN;
237 	}
238 
239 	musb_writel(musb->mregs, OTG_INTERFSEL, l);
240 
241 	dev_dbg(dev, "HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
242 			"sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
243 			musb_readl(musb->mregs, OTG_REVISION),
244 			musb_readl(musb->mregs, OTG_SYSCONFIG),
245 			musb_readl(musb->mregs, OTG_SYSSTATUS),
246 			musb_readl(musb->mregs, OTG_INTERFSEL),
247 			musb_readl(musb->mregs, OTG_SIMENABLE));
248 
249 	return 0;
250 }
251 
omap2430_musb_enable(struct musb * musb)252 static void omap2430_musb_enable(struct musb *musb)
253 {
254 	struct device *dev = musb->controller;
255 	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
256 
257 	if (glue->status == MUSB_UNKNOWN)
258 		glue->status = MUSB_VBUS_OFF;
259 	omap_musb_set_mailbox(glue);
260 }
261 
omap2430_musb_disable(struct musb * musb)262 static void omap2430_musb_disable(struct musb *musb)
263 {
264 	struct device *dev = musb->controller;
265 	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
266 
267 	if (glue->status != MUSB_UNKNOWN)
268 		omap_control_usb_set_mode(glue->control_otghs,
269 			USB_MODE_DISCONNECT);
270 }
271 
omap2430_musb_exit(struct musb * musb)272 static int omap2430_musb_exit(struct musb *musb)
273 {
274 	struct device *dev = musb->controller;
275 	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
276 
277 	omap2430_low_level_exit(musb);
278 	phy_power_off(musb->phy);
279 	phy_exit(musb->phy);
280 	musb->phy = NULL;
281 	cancel_work_sync(&glue->omap_musb_mailbox_work);
282 
283 	return 0;
284 }
285 
286 static const struct musb_platform_ops omap2430_ops = {
287 	.quirks		= MUSB_DMA_INVENTRA,
288 #ifdef CONFIG_USB_INVENTRA_DMA
289 	.dma_init	= musbhs_dma_controller_create,
290 	.dma_exit	= musbhs_dma_controller_destroy,
291 #endif
292 	.init		= omap2430_musb_init,
293 	.exit		= omap2430_musb_exit,
294 
295 	.enable		= omap2430_musb_enable,
296 	.disable	= omap2430_musb_disable,
297 
298 	.phy_callback	= omap2430_musb_mailbox,
299 };
300 
301 static u64 omap2430_dmamask = DMA_BIT_MASK(32);
302 
omap2430_probe(struct platform_device * pdev)303 static int omap2430_probe(struct platform_device *pdev)
304 {
305 	struct musb_hdrc_platform_data	*pdata = dev_get_platdata(&pdev->dev);
306 	struct omap_musb_board_data	*data;
307 	struct platform_device		*musb;
308 	struct omap2430_glue		*glue;
309 	struct device_node		*np = pdev->dev.of_node;
310 	struct musb_hdrc_config		*config;
311 	struct device_node		*control_node;
312 	struct platform_device		*control_pdev;
313 	int				ret = -ENOMEM, val;
314 	bool				populate_irqs = false;
315 
316 	if (!np)
317 		return -ENODEV;
318 
319 	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
320 	if (!glue)
321 		goto err0;
322 
323 	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
324 	if (!musb) {
325 		dev_err(&pdev->dev, "failed to allocate musb device\n");
326 		goto err0;
327 	}
328 
329 	musb->dev.parent		= &pdev->dev;
330 	musb->dev.dma_mask		= &omap2430_dmamask;
331 	musb->dev.coherent_dma_mask	= omap2430_dmamask;
332 
333 	/*
334 	 * Legacy SoCs using omap_device get confused if node is moved
335 	 * because of interconnect properties mixed into the node.
336 	 */
337 	if (of_property_present(np, "ti,hwmods")) {
338 		dev_warn(&pdev->dev, "please update to probe with ti-sysc\n");
339 		populate_irqs = true;
340 	} else {
341 		device_set_of_node_from_dev(&musb->dev, &pdev->dev);
342 	}
343 	of_node_put(np);
344 
345 	glue->dev			= &pdev->dev;
346 	glue->musb			= musb;
347 	glue->status			= MUSB_UNKNOWN;
348 	glue->control_otghs = ERR_PTR(-ENODEV);
349 
350 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
351 	if (!pdata)
352 		goto err2;
353 
354 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
355 	if (!data)
356 		goto err2;
357 
358 	config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
359 	if (!config)
360 		goto err2;
361 
362 	of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
363 	of_property_read_u32(np, "interface-type",
364 			(u32 *)&data->interface_type);
365 	of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);
366 	of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);
367 	of_property_read_u32(np, "power", (u32 *)&pdata->power);
368 
369 	ret = of_property_read_u32(np, "multipoint", &val);
370 	if (!ret && val)
371 		config->multipoint = true;
372 
373 	pdata->board_data	= data;
374 	pdata->config		= config;
375 
376 	control_node = of_parse_phandle(np, "ctrl-module", 0);
377 	if (control_node) {
378 		control_pdev = of_find_device_by_node(control_node);
379 		of_node_put(control_node);
380 		if (!control_pdev) {
381 			dev_err(&pdev->dev, "Failed to get control device\n");
382 			ret = -EINVAL;
383 			goto err2;
384 		}
385 		glue->control_otghs = &control_pdev->dev;
386 	}
387 
388 	pdata->platform_ops		= &omap2430_ops;
389 
390 	platform_set_drvdata(pdev, glue);
391 
392 	/*
393 	 * REVISIT if we ever have two instances of the wrapper, we will be
394 	 * in big trouble
395 	 */
396 	_glue	= glue;
397 
398 	INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
399 
400 	ret = platform_device_add_resources(musb, pdev->resource, pdev->num_resources);
401 	if (ret) {
402 		dev_err(&pdev->dev, "failed to add resources\n");
403 		goto err2;
404 	}
405 
406 	if (populate_irqs) {
407 		struct resource musb_res[3];
408 		struct resource *res;
409 		int i = 0;
410 
411 		memset(musb_res, 0, sizeof(*musb_res) * ARRAY_SIZE(musb_res));
412 
413 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
414 		if (!res) {
415 			ret = -EINVAL;
416 			goto err2;
417 		}
418 
419 		musb_res[i].start = res->start;
420 		musb_res[i].end = res->end;
421 		musb_res[i].flags = res->flags;
422 		musb_res[i].name = res->name;
423 		i++;
424 
425 		ret = of_irq_get_byname(np, "mc");
426 		if (ret > 0) {
427 			musb_res[i].start = ret;
428 			musb_res[i].flags = IORESOURCE_IRQ;
429 			musb_res[i].name = "mc";
430 			i++;
431 		}
432 
433 		ret = of_irq_get_byname(np, "dma");
434 		if (ret > 0) {
435 			musb_res[i].start = ret;
436 			musb_res[i].flags = IORESOURCE_IRQ;
437 			musb_res[i].name = "dma";
438 			i++;
439 		}
440 
441 		ret = platform_device_add_resources(musb, musb_res, i);
442 		if (ret) {
443 			dev_err(&pdev->dev, "failed to add IRQ resources\n");
444 			goto err2;
445 		}
446 	}
447 
448 	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
449 	if (ret) {
450 		dev_err(&pdev->dev, "failed to add platform_data\n");
451 		goto err2;
452 	}
453 
454 	pm_runtime_enable(glue->dev);
455 
456 	ret = platform_device_add(musb);
457 	if (ret) {
458 		dev_err(&pdev->dev, "failed to register musb device\n");
459 		goto err3;
460 	}
461 
462 	return 0;
463 
464 err3:
465 	pm_runtime_disable(glue->dev);
466 
467 err2:
468 	platform_device_put(musb);
469 
470 err0:
471 	return ret;
472 }
473 
omap2430_remove(struct platform_device * pdev)474 static void omap2430_remove(struct platform_device *pdev)
475 {
476 	struct omap2430_glue *glue = platform_get_drvdata(pdev);
477 
478 	platform_device_unregister(glue->musb);
479 	pm_runtime_disable(glue->dev);
480 }
481 
482 #ifdef CONFIG_PM
483 
omap2430_runtime_suspend(struct device * dev)484 static int omap2430_runtime_suspend(struct device *dev)
485 {
486 	struct omap2430_glue		*glue = dev_get_drvdata(dev);
487 	struct musb			*musb = glue_to_musb(glue);
488 
489 	if (!musb)
490 		return 0;
491 
492 	musb->context.otg_interfsel = musb_readl(musb->mregs,
493 						 OTG_INTERFSEL);
494 
495 	omap2430_low_level_exit(musb);
496 
497 	if (!glue->phy_suspended) {
498 		phy_power_off(musb->phy);
499 		phy_exit(musb->phy);
500 	}
501 
502 	glue->is_runtime_suspended = 1;
503 
504 	return 0;
505 }
506 
omap2430_runtime_resume(struct device * dev)507 static int omap2430_runtime_resume(struct device *dev)
508 {
509 	struct omap2430_glue		*glue = dev_get_drvdata(dev);
510 	struct musb			*musb = glue_to_musb(glue);
511 
512 	if (!musb)
513 		return 0;
514 
515 	if (!glue->phy_suspended) {
516 		phy_init(musb->phy);
517 		phy_power_on(musb->phy);
518 	}
519 
520 	omap2430_low_level_init(musb);
521 	musb_writel(musb->mregs, OTG_INTERFSEL,
522 		    musb->context.otg_interfsel);
523 
524 	/* Wait for musb to get oriented. Otherwise we can get babble */
525 	usleep_range(200000, 250000);
526 
527 	glue->is_runtime_suspended = 0;
528 
529 	return 0;
530 }
531 
532 /* I2C and SPI PHYs need to be suspended before the glue layer */
omap2430_suspend(struct device * dev)533 static int omap2430_suspend(struct device *dev)
534 {
535 	struct omap2430_glue *glue = dev_get_drvdata(dev);
536 	struct musb *musb = glue_to_musb(glue);
537 
538 	phy_power_off(musb->phy);
539 	phy_exit(musb->phy);
540 	glue->phy_suspended = 1;
541 
542 	return 0;
543 }
544 
545 /* Glue layer needs to be suspended after musb_suspend() */
omap2430_suspend_late(struct device * dev)546 static int omap2430_suspend_late(struct device *dev)
547 {
548 	struct omap2430_glue *glue = dev_get_drvdata(dev);
549 
550 	if (glue->is_runtime_suspended)
551 		return 0;
552 
553 	glue->needs_resume = 1;
554 
555 	return omap2430_runtime_suspend(dev);
556 }
557 
omap2430_resume_early(struct device * dev)558 static int omap2430_resume_early(struct device *dev)
559 {
560 	struct omap2430_glue *glue = dev_get_drvdata(dev);
561 
562 	if (!glue->needs_resume)
563 		return 0;
564 
565 	glue->needs_resume = 0;
566 
567 	return omap2430_runtime_resume(dev);
568 }
569 
omap2430_resume(struct device * dev)570 static int omap2430_resume(struct device *dev)
571 {
572 	struct omap2430_glue *glue = dev_get_drvdata(dev);
573 	struct musb *musb = glue_to_musb(glue);
574 
575 	phy_init(musb->phy);
576 	phy_power_on(musb->phy);
577 	glue->phy_suspended = 0;
578 
579 	return 0;
580 }
581 
582 static const struct dev_pm_ops omap2430_pm_ops = {
583 	.runtime_suspend = omap2430_runtime_suspend,
584 	.runtime_resume = omap2430_runtime_resume,
585 	.suspend = omap2430_suspend,
586 	.suspend_late = omap2430_suspend_late,
587 	.resume_early = omap2430_resume_early,
588 	.resume = omap2430_resume,
589 };
590 
591 #define DEV_PM_OPS	(&omap2430_pm_ops)
592 #else
593 #define DEV_PM_OPS	NULL
594 #endif
595 
596 #ifdef CONFIG_OF
597 static const struct of_device_id omap2430_id_table[] = {
598 	{
599 		.compatible = "ti,omap4-musb"
600 	},
601 	{
602 		.compatible = "ti,omap3-musb"
603 	},
604 	{},
605 };
606 MODULE_DEVICE_TABLE(of, omap2430_id_table);
607 #endif
608 
609 static struct platform_driver omap2430_driver = {
610 	.probe		= omap2430_probe,
611 	.remove_new	= omap2430_remove,
612 	.driver		= {
613 		.name	= "musb-omap2430",
614 		.pm	= DEV_PM_OPS,
615 		.of_match_table = of_match_ptr(omap2430_id_table),
616 	},
617 };
618 
619 module_platform_driver(omap2430_driver);
620 
621 MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
622 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
623 MODULE_LICENSE("GPL v2");
624