1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * (C) Copyright 2007 4 * Texas Instruments 5 * Karthik Dasu <karthik-dp@ti.com> 6 * 7 * (C) Copyright 2004 8 * Texas Instruments, <www.ti.com> 9 * Richard Woodruff <r-woodruff2@ti.com> 10 */ 11#include <linux/linkage.h> 12 13#include <asm/assembler.h> 14 15#include "omap34xx.h" 16#include "iomap.h" 17#include "cm3xxx.h" 18#include "prm3xxx.h" 19#include "sdrc.h" 20#include "sram.h" 21#include "control.h" 22 23/* 24 * Registers access definitions 25 */ 26#define SDRC_SCRATCHPAD_SEM_OFFS 0xc 27#define SDRC_SCRATCHPAD_SEM_V OMAP343X_SCRATCHPAD_REGADDR\ 28 (SDRC_SCRATCHPAD_SEM_OFFS) 29#define PM_PREPWSTST_CORE_P OMAP3430_PRM_BASE + CORE_MOD +\ 30 OMAP3430_PM_PREPWSTST 31#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL 32#define CM_IDLEST1_CORE_V OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1) 33#define CM_IDLEST_CKGEN_V OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST) 34#define SRAM_BASE_P OMAP3_SRAM_PA 35#define CONTROL_STAT OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS 36#define CONTROL_MEM_RTA_CTRL (OMAP343X_CTRL_BASE +\ 37 OMAP36XX_CONTROL_MEM_RTA_CTRL) 38 39/* Move this as correct place is available */ 40#define SCRATCHPAD_MEM_OFFS 0x310 41#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE +\ 42 OMAP343X_CONTROL_MEM_WKUP +\ 43 SCRATCHPAD_MEM_OFFS) 44#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER) 45#define SDRC_SYSCONFIG_P (OMAP343X_SDRC_BASE + SDRC_SYSCONFIG) 46#define SDRC_MR_0_P (OMAP343X_SDRC_BASE + SDRC_MR_0) 47#define SDRC_EMR2_0_P (OMAP343X_SDRC_BASE + SDRC_EMR2_0) 48#define SDRC_MANUAL_0_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_0) 49#define SDRC_MR_1_P (OMAP343X_SDRC_BASE + SDRC_MR_1) 50#define SDRC_EMR2_1_P (OMAP343X_SDRC_BASE + SDRC_EMR2_1) 51#define SDRC_MANUAL_1_P (OMAP343X_SDRC_BASE + SDRC_MANUAL_1) 52#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) 53#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) 54 55/* 56 * This file needs be built unconditionally as ARM to interoperate correctly 57 * with non-Thumb-2-capable firmware. 58 */ 59 .arm 60 61/* 62 * API functions 63 */ 64 65 .text 66/* 67 * L2 cache needs to be toggled for stable OFF mode functionality on 3630. 68 * This function sets up a flag that will allow for this toggling to take 69 * place on 3630. Hopefully some version in the future may not need this. 70 */ 71ENTRY(enable_omap3630_toggle_l2_on_restore) 72 stmfd sp!, {lr} @ save registers on stack 73 /* Setup so that we will disable and enable l2 */ 74 mov r1, #0x1 75 adr r3, l2dis_3630_offset 76 ldr r2, [r3] @ value for offset 77 str r1, [r2, r3] @ write to l2dis_3630 78 ldmfd sp!, {pc} @ restore regs and return 79ENDPROC(enable_omap3630_toggle_l2_on_restore) 80 81/* 82 * Function to call rom code to save secure ram context. 83 * 84 * r0 = physical address of the parameters 85 */ 86 .arch armv7-a 87 .arch_extension sec 88ENTRY(save_secure_ram_context) 89 stmfd sp!, {r4 - r11, lr} @ save registers on stack 90 mov r3, r0 @ physical address of parameters 91 mov r0, #25 @ set service ID for PPA 92 mov r12, r0 @ copy secure service ID in r12 93 mov r1, #0 @ set task id for ROM code in r1 94 mov r2, #4 @ set some flags in r2, r6 95 mov r6, #0xff 96 dsb @ data write barrier 97 dmb @ data memory barrier 98 smc #1 @ call SMI monitor (smi #1) 99 nop 100 nop 101 nop 102 nop 103 ldmfd sp!, {r4 - r11, pc} 104ENDPROC(save_secure_ram_context) 105 106/* 107 * ====================== 108 * == Idle entry point == 109 * ====================== 110 */ 111 112/* 113 * Forces OMAP into idle state 114 * 115 * omap34xx_cpu_suspend() - This bit of code saves the CPU context if needed 116 * and executes the WFI instruction. Calling WFI effectively changes the 117 * power domains states to the desired target power states. 118 * 119 * 120 * Notes: 121 * - only the minimum set of functions gets copied to internal SRAM at boot 122 * and after wake-up from OFF mode, cf. omap_push_sram_idle. The function 123 * pointers in SDRAM or SRAM are called depending on the desired low power 124 * target state. 125 * - when the OMAP wakes up it continues at different execution points 126 * depending on the low power mode (non-OFF vs OFF modes), 127 * cf. 'Resume path for xxx mode' comments. 128 */ 129 .align 3 130ENTRY(omap34xx_cpu_suspend) 131 stmfd sp!, {r4 - r11, lr} @ save registers on stack 132 133 /* 134 * r0 contains information about saving context: 135 * 0 - No context lost 136 * 1 - Only L1 and logic lost 137 * 2 - Only L2 lost (Even L1 is retained we clean it along with L2) 138 * 3 - Both L1 and L2 lost and logic lost 139 */ 140 141 /* 142 * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi) 143 * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram) 144 */ 145 ldr r4, omap3_do_wfi_sram_addr 146 ldr r5, [r4] 147 cmp r0, #0x0 @ If no context save required, 148 bxeq r5 @ jump to the WFI code in SRAM 149 150 151 /* Otherwise fall through to the save context code */ 152save_context_wfi: 153 /* 154 * jump out to kernel flush routine 155 * - reuse that code is better 156 * - it executes in a cached space so is faster than refetch per-block 157 * - should be faster and will change with kernel 158 * - 'might' have to copy address, load and jump to it 159 * Flush all data from the L1 data cache before disabling 160 * SCTLR.C bit. 161 */ 162 ldr r1, kernel_flush 163 mov lr, pc 164 bx r1 165 166 /* 167 * Clear the SCTLR.C bit to prevent further data cache 168 * allocation. Clearing SCTLR.C would make all the data accesses 169 * strongly ordered and would not hit the cache. 170 */ 171 mrc p15, 0, r0, c1, c0, 0 172 bic r0, r0, #(1 << 2) @ Disable the C bit 173 mcr p15, 0, r0, c1, c0, 0 174 isb 175 176 /* 177 * Invalidate L1 data cache. Even though only invalidate is 178 * necessary exported flush API is used here. Doing clean 179 * on already clean cache would be almost NOP. 180 */ 181 ldr r1, kernel_flush 182 blx r1 183 b omap3_do_wfi 184ENDPROC(omap34xx_cpu_suspend) 185omap3_do_wfi_sram_addr: 186 .word omap3_do_wfi_sram 187kernel_flush: 188 .word v7_flush_dcache_all 189 190/* =================================== 191 * == WFI instruction => Enter idle == 192 * =================================== 193 */ 194 195/* 196 * Do WFI instruction 197 * Includes the resume path for non-OFF modes 198 * 199 * This code gets copied to internal SRAM and is accessible 200 * from both SDRAM and SRAM: 201 * - executed from SRAM for non-off modes (omap3_do_wfi_sram), 202 * - executed from SDRAM for OFF mode (omap3_do_wfi). 203 */ 204 .align 3 205ENTRY(omap3_do_wfi) 206 ldr r4, sdrc_power @ read the SDRC_POWER register 207 ldr r5, [r4] @ read the contents of SDRC_POWER 208 orr r5, r5, #0x40 @ enable self refresh on idle req 209 str r5, [r4] @ write back to SDRC_POWER register 210 211 /* Data memory barrier and Data sync barrier */ 212 dsb 213 dmb 214 215/* 216 * =================================== 217 * == WFI instruction => Enter idle == 218 * =================================== 219 */ 220 wfi @ wait for interrupt 221 222/* 223 * =================================== 224 * == Resume path for non-OFF modes == 225 * =================================== 226 */ 227 nop 228 nop 229 nop 230 nop 231 nop 232 nop 233 nop 234 nop 235 nop 236 nop 237 238/* 239 * This function implements the erratum ID i581 WA: 240 * SDRC state restore before accessing the SDRAM 241 * 242 * Only used at return from non-OFF mode. For OFF 243 * mode the ROM code configures the SDRC and 244 * the DPLL before calling the restore code directly 245 * from DDR. 246 */ 247 248/* Make sure SDRC accesses are ok */ 249wait_sdrc_ok: 250 251/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */ 252 ldr r4, cm_idlest_ckgen 253wait_dpll3_lock: 254 ldr r5, [r4] 255 tst r5, #1 256 beq wait_dpll3_lock 257 258 ldr r4, cm_idlest1_core 259wait_sdrc_ready: 260 ldr r5, [r4] 261 tst r5, #0x2 262 bne wait_sdrc_ready 263 /* allow DLL powerdown upon hw idle req */ 264 ldr r4, sdrc_power 265 ldr r5, [r4] 266 bic r5, r5, #0x40 267 str r5, [r4] 268 269is_dll_in_lock_mode: 270 /* Is dll in lock mode? */ 271 ldr r4, sdrc_dlla_ctrl 272 ldr r5, [r4] 273 tst r5, #0x4 274 bne exit_nonoff_modes @ Return if locked 275 /* wait till dll locks */ 276wait_dll_lock_timed: 277 ldr r4, sdrc_dlla_status 278 /* Wait 20uS for lock */ 279 mov r6, #8 280wait_dll_lock: 281 subs r6, r6, #0x1 282 beq kick_dll 283 ldr r5, [r4] 284 and r5, r5, #0x4 285 cmp r5, #0x4 286 bne wait_dll_lock 287 b exit_nonoff_modes @ Return when locked 288 289 /* disable/reenable DLL if not locked */ 290kick_dll: 291 ldr r4, sdrc_dlla_ctrl 292 ldr r5, [r4] 293 mov r6, r5 294 bic r6, #(1<<3) @ disable dll 295 str r6, [r4] 296 dsb 297 orr r6, r6, #(1<<3) @ enable dll 298 str r6, [r4] 299 dsb 300 b wait_dll_lock_timed 301 302exit_nonoff_modes: 303 /* Re-enable C-bit if needed */ 304 mrc p15, 0, r0, c1, c0, 0 305 tst r0, #(1 << 2) @ Check C bit enabled? 306 orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared 307 mcreq p15, 0, r0, c1, c0, 0 308 isb 309 310/* 311 * =================================== 312 * == Exit point from non-OFF modes == 313 * =================================== 314 */ 315 ldmfd sp!, {r4 - r11, pc} @ restore regs and return 316ENDPROC(omap3_do_wfi) 317sdrc_power: 318 .word SDRC_POWER_V 319cm_idlest1_core: 320 .word CM_IDLEST1_CORE_V 321cm_idlest_ckgen: 322 .word CM_IDLEST_CKGEN_V 323sdrc_dlla_status: 324 .word SDRC_DLLA_STATUS_V 325sdrc_dlla_ctrl: 326 .word SDRC_DLLA_CTRL_V 327ENTRY(omap3_do_wfi_sz) 328 .word . - omap3_do_wfi 329 330 331/* 332 * ============================== 333 * == Resume path for OFF mode == 334 * ============================== 335 */ 336 337/* 338 * The restore_* functions are called by the ROM code 339 * when back from WFI in OFF mode. 340 * Cf. the get_*restore_pointer functions. 341 * 342 * restore_es3: applies to 34xx >= ES3.0 343 * restore_3630: applies to 36xx 344 * restore: common code for 3xxx 345 * 346 * Note: when back from CORE and MPU OFF mode we are running 347 * from SDRAM, without MMU, without the caches and prediction. 348 * Also the SRAM content has been cleared. 349 */ 350ENTRY(omap3_restore_es3) 351 ldr r5, pm_prepwstst_core_p 352 ldr r4, [r5] 353 and r4, r4, #0x3 354 cmp r4, #0x0 @ Check if previous power state of CORE is OFF 355 bne omap3_restore @ Fall through to OMAP3 common code 356 adr r0, es3_sdrc_fix 357 ldr r1, sram_base 358 ldr r2, es3_sdrc_fix_sz 359 mov r2, r2, ror #2 360copy_to_sram: 361 ldmia r0!, {r3} @ val = *src 362 stmia r1!, {r3} @ *dst = val 363 subs r2, r2, #0x1 @ num_words-- 364 bne copy_to_sram 365 ldr r1, sram_base 366 blx r1 367 b omap3_restore @ Fall through to OMAP3 common code 368ENDPROC(omap3_restore_es3) 369 370ENTRY(omap3_restore_3630) 371 ldr r1, pm_prepwstst_core_p 372 ldr r2, [r1] 373 and r2, r2, #0x3 374 cmp r2, #0x0 @ Check if previous power state of CORE is OFF 375 bne omap3_restore @ Fall through to OMAP3 common code 376 /* Disable RTA before giving control */ 377 ldr r1, control_mem_rta 378 mov r2, #OMAP36XX_RTA_DISABLE 379 str r2, [r1] 380ENDPROC(omap3_restore_3630) 381 382 /* Fall through to common code for the remaining logic */ 383 384ENTRY(omap3_restore) 385 /* 386 * Read the pwstctrl register to check the reason for mpu reset. 387 * This tells us what was lost. 388 */ 389 ldr r1, pm_pwstctrl_mpu 390 ldr r2, [r1] 391 and r2, r2, #0x3 392 cmp r2, #0x0 @ Check if target power state was OFF or RET 393 bne logic_l1_restore 394 395 adr r1, l2dis_3630_offset @ address for offset 396 ldr r0, [r1] @ value for offset 397 ldr r0, [r1, r0] @ value at l2dis_3630 398 cmp r0, #0x1 @ should we disable L2 on 3630? 399 bne skipl2dis 400 mrc p15, 0, r0, c1, c0, 1 401 bic r0, r0, #2 @ disable L2 cache 402 mcr p15, 0, r0, c1, c0, 1 403skipl2dis: 404 ldr r0, control_stat 405 ldr r1, [r0] 406 and r1, #0x700 407 cmp r1, #0x300 408 beq l2_inv_gp 409 adr r0, l2_inv_api_params_offset 410 ldr r3, [r0] 411 add r3, r3, r0 @ r3 points to dummy parameters 412 mov r0, #40 @ set service ID for PPA 413 mov r12, r0 @ copy secure Service ID in r12 414 mov r1, #0 @ set task id for ROM code in r1 415 mov r2, #4 @ set some flags in r2, r6 416 mov r6, #0xff 417 dsb @ data write barrier 418 dmb @ data memory barrier 419 smc #1 @ call SMI monitor (smi #1) 420 /* Write to Aux control register to set some bits */ 421 mov r0, #42 @ set service ID for PPA 422 mov r12, r0 @ copy secure Service ID in r12 423 mov r1, #0 @ set task id for ROM code in r1 424 mov r2, #4 @ set some flags in r2, r6 425 mov r6, #0xff 426 ldr r4, scratchpad_base 427 ldr r3, [r4, #0xBC] @ r3 points to parameters 428 dsb @ data write barrier 429 dmb @ data memory barrier 430 smc #1 @ call SMI monitor (smi #1) 431 432#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE 433 /* Restore L2 aux control register */ 434 @ set service ID for PPA 435 mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID 436 mov r12, r0 @ copy service ID in r12 437 mov r1, #0 @ set task ID for ROM code in r1 438 mov r2, #4 @ set some flags in r2, r6 439 mov r6, #0xff 440 ldr r4, scratchpad_base 441 ldr r3, [r4, #0xBC] 442 adds r3, r3, #8 @ r3 points to parameters 443 dsb @ data write barrier 444 dmb @ data memory barrier 445 smc #1 @ call SMI monitor (smi #1) 446#endif 447 b logic_l1_restore 448 449 .align 450l2_inv_api_params_offset: 451 .long l2_inv_api_params - . 452l2_inv_gp: 453 /* Execute smi to invalidate L2 cache */ 454 mov r12, #0x1 @ set up to invalidate L2 455 smc #0 @ Call SMI monitor (smieq) 456 /* Write to Aux control register to set some bits */ 457 ldr r4, scratchpad_base 458 ldr r3, [r4,#0xBC] 459 ldr r0, [r3,#4] 460 mov r12, #0x3 461 smc #0 @ Call SMI monitor (smieq) 462 ldr r4, scratchpad_base 463 ldr r3, [r4,#0xBC] 464 ldr r0, [r3,#12] 465 mov r12, #0x2 466 smc #0 @ Call SMI monitor (smieq) 467logic_l1_restore: 468 adr r0, l2dis_3630_offset @ address for offset 469 ldr r1, [r0] @ value for offset 470 ldr r1, [r0, r1] @ value at l2dis_3630 471 cmp r1, #0x1 @ Test if L2 re-enable needed on 3630 472 bne skipl2reen 473 mrc p15, 0, r1, c1, c0, 1 474 orr r1, r1, #2 @ re-enable L2 cache 475 mcr p15, 0, r1, c1, c0, 1 476skipl2reen: 477 478 /* Now branch to the common CPU resume function */ 479 b cpu_resume 480ENDPROC(omap3_restore) 481 482 .ltorg 483 484/* 485 * Local variables 486 */ 487pm_prepwstst_core_p: 488 .word PM_PREPWSTST_CORE_P 489pm_pwstctrl_mpu: 490 .word PM_PWSTCTRL_MPU_P 491scratchpad_base: 492 .word SCRATCHPAD_BASE_P 493sram_base: 494 .word SRAM_BASE_P + 0x8000 495control_stat: 496 .word CONTROL_STAT 497control_mem_rta: 498 .word CONTROL_MEM_RTA_CTRL 499l2dis_3630_offset: 500 .long l2dis_3630 - . 501 502 .data 503 .align 2 504l2dis_3630: 505 .word 0 506 507 .data 508 .align 2 509l2_inv_api_params: 510 .word 0x1, 0x00 511 512/* 513 * Internal functions 514 */ 515 516/* 517 * This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 518 * Copied to and run from SRAM in order to reconfigure the SDRC parameters. 519 */ 520 .text 521 .align 3 522ENTRY(es3_sdrc_fix) 523 ldr r4, sdrc_syscfg @ get config addr 524 ldr r5, [r4] @ get value 525 tst r5, #0x100 @ is part access blocked 526 it eq 527 biceq r5, r5, #0x100 @ clear bit if set 528 str r5, [r4] @ write back change 529 ldr r4, sdrc_mr_0 @ get config addr 530 ldr r5, [r4] @ get value 531 str r5, [r4] @ write back change 532 ldr r4, sdrc_emr2_0 @ get config addr 533 ldr r5, [r4] @ get value 534 str r5, [r4] @ write back change 535 ldr r4, sdrc_manual_0 @ get config addr 536 mov r5, #0x2 @ autorefresh command 537 str r5, [r4] @ kick off refreshes 538 ldr r4, sdrc_mr_1 @ get config addr 539 ldr r5, [r4] @ get value 540 str r5, [r4] @ write back change 541 ldr r4, sdrc_emr2_1 @ get config addr 542 ldr r5, [r4] @ get value 543 str r5, [r4] @ write back change 544 ldr r4, sdrc_manual_1 @ get config addr 545 mov r5, #0x2 @ autorefresh command 546 str r5, [r4] @ kick off refreshes 547 bx lr 548 549/* 550 * Local variables 551 */ 552 .align 553sdrc_syscfg: 554 .word SDRC_SYSCONFIG_P 555sdrc_mr_0: 556 .word SDRC_MR_0_P 557sdrc_emr2_0: 558 .word SDRC_EMR2_0_P 559sdrc_manual_0: 560 .word SDRC_MANUAL_0_P 561sdrc_mr_1: 562 .word SDRC_MR_1_P 563sdrc_emr2_1: 564 .word SDRC_EMR2_1_P 565sdrc_manual_1: 566 .word SDRC_MANUAL_1_P 567ENDPROC(es3_sdrc_fix) 568ENTRY(es3_sdrc_fix_sz) 569 .word . - es3_sdrc_fix 570