xref: /freebsd/sys/sys/chio.h (revision 95ee2897e98f5d444f26ed2334cc7c439f9c16c6)
1  /*	$NetBSD: chio.h,v 1.9 1997/09/29 17:32:26 mjacob Exp $	*/
2  
3  /*-
4   * SPDX-License-Identifier: BSD-4-Clause
5   *
6   * Copyright (c) 1996 Jason R. Thorpe <thorpej@and.com>
7   * All rights reserved.
8   *
9   * Redistribution and use in source and binary forms, with or without
10   * modification, are permitted provided that the following conditions
11   * are met:
12   * 1. Redistributions of source code must retain the above copyright
13   *    notice, this list of conditions and the following disclaimer.
14   * 2. Redistributions in binary form must reproduce the above copyright
15   *    notice, this list of conditions and the following disclaimer in the
16   *    documentation and/or other materials provided with the distribution.
17   * 3. All advertising materials mentioning features or use of this software
18   *    must display the following acknowledgements:
19   *	This product includes software developed by Jason R. Thorpe
20   *	for And Communications, http://www.and.com/
21   * 4. The name of the author may not be used to endorse or promote products
22   *    derived from this software without specific prior written permission.
23   *
24   * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
25   * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
26   * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
27   * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
28   * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
29   * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
30   * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
31   * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
32   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
33   * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34   * SUCH DAMAGE.
35   */
36  
37  #ifndef	_SYS_CHIO_H_
38  #define	_SYS_CHIO_H_
39  
40  #ifndef _KERNEL
41  #include <sys/types.h>
42  #endif
43  #include <sys/ioccom.h>
44  
45  /*
46   * Element types.  Used as "to" and "from" type indicators in move
47   * and exchange operations.
48   *
49   * Note that code in sys/scsi/ch.c relies on these values (uses them
50   * as offsets in an array, and other evil), so don't muck with them
51   * unless you know what you're doing.
52   */
53  #define CHET_MT		0	/* medium transport (picker) */
54  #define CHET_ST		1	/* storage transport (slot) */
55  #define CHET_IE		2	/* import/export (portal) */
56  #define CHET_DT		3	/* data transfer (drive) */
57  #define CHET_MAX	CHET_DT
58  
59  /*
60   * Maximum length of a volume identification string
61   */
62  #define CH_VOLTAG_MAXLEN	32
63  
64  /*
65   * Structure used to execute a MOVE MEDIUM command.
66   */
67  struct changer_move {
68  	u_int16_t	cm_fromtype;	/* element type to move from */
69  	u_int16_t	cm_fromunit;	/* logical unit of from element */
70  	u_int16_t	cm_totype;	/* element type to move to */
71  	u_int16_t	cm_tounit;	/* logical unit of to element */
72  	u_int16_t	cm_flags;	/* misc. flags */
73  };
74  
75  /* cm_flags */
76  #define CM_INVERT	0x01	/* invert media */
77  
78  /*
79   * Structure used to execute an EXCHANGE MEDIUM command.  In an
80   * exchange operation, the following steps occur:
81   *
82   *	- media from source is moved to first destination.
83   *
84   *	- media previously occupying first destination is moved
85   *	  to the second destination.
86   *
87   * The second destination may or may not be the same as the source.
88   * In the case of a simple exchange, the source and second destination
89   * are the same.
90   */
91  struct changer_exchange {
92  	u_int16_t	ce_srctype;	/* element type of source */
93  	u_int16_t	ce_srcunit;	/* logical unit of source */
94  	u_int16_t	ce_fdsttype;	/* element type of first destination */
95  	u_int16_t	ce_fdstunit;	/* logical unit of first destination */
96  	u_int16_t	ce_sdsttype;	/* element type of second destination */
97  	u_int16_t	ce_sdstunit;	/* logical unit of second destination */
98  	u_int16_t	ce_flags;	/* misc. flags */
99  };
100  
101  /* ce_flags */
102  #define CE_INVERT1	0x01	/* invert media 1 */
103  #define CE_INVERT2	0x02	/* invert media 2 */
104  
105  /*
106   * Structure used to execute a POSITION TO ELEMENT command.  This
107   * moves the current picker in front of the specified element.
108   */
109  struct changer_position {
110  	u_int16_t	cp_type;	/* element type */
111  	u_int16_t	cp_unit;	/* logical unit of element */
112  	u_int16_t	cp_flags;	/* misc. flags */
113  };
114  
115  /* cp_flags */
116  #define CP_INVERT	0x01	/* invert picker */
117  
118  /*
119   * Data returned by CHIOGPARAMS.
120   */
121  struct changer_params {
122  	u_int16_t	cp_npickers;	/* number of pickers */
123  	u_int16_t	cp_nslots;	/* number of slots */
124  	u_int16_t	cp_nportals;	/* number of import/export portals */
125  	u_int16_t	cp_ndrives;	/* number of drives */
126  };
127  
128  /*
129   * Command used to get element status.
130   */
131  
132  struct changer_voltag {
133  	u_char		cv_volid[CH_VOLTAG_MAXLEN+1];
134  	u_int16_t	cv_serial;
135  };
136  
137  typedef struct changer_voltag changer_voltag_t;
138  
139  /*
140   * Flags definitions for ces_status
141   * Not all flags have meaning for all element types.
142   */
143  typedef enum {
144  	CES_STATUS_FULL	  = 0x001,	/* element is full */
145  	CES_STATUS_IMPEXP = 0x002,	/* media deposited by operator */
146  	CES_STATUS_EXCEPT = 0x004,	/* element in abnormal state */
147  	CES_PICKER_MASK	  = 0x005,	/* flags valid for pickers */
148  	CES_STATUS_ACCESS = 0x008,	/* media accessible by picker */
149  	CES_SLOT_MASK	  = 0x00c,	/* flags valid for slots */
150  	CES_DRIVE_MASK	  = 0x00c,	/* flags valid for drives */
151  	CES_STATUS_EXENAB = 0x010,	/* element supports exporting */
152  	CES_STATUS_INENAB = 0x020,	/* element supports importing */
153  	CES_PORTAL_MASK	  = 0x03f,	/* flags valid for portals */
154  	CES_INVERT	  = 0x040,	/* invert bit */
155  	CES_SOURCE_VALID  = 0x080,	/* source address (ces_source) valid */
156  	CES_SCSIID_VALID  = 0x100,	/* ces_scsi_id is valid */
157  	CES_LUN_VALID	  = 0x200,	/* ces_scsi_lun is valid */
158  	CES_PIV		  = 0x400	/* ces_protocol_id is valid */
159  } ces_status_flags;
160  
161  struct changer_element_status {
162  	u_int8_t		ces_type;	  /* element type */
163  	u_int16_t		ces_addr;	  /* logical element address */
164  	u_int16_t		ces_int_addr;	  /* changer element address */
165  	ces_status_flags	ces_flags;	  /*
166  						   * see CESTATUS definitions
167  						   * below
168  						   */
169  	u_int8_t		ces_sensecode;	  /*
170  						   * additional sense
171  						   * code for element */
172  	u_int8_t		ces_sensequal;	  /*
173  						   * additional sense
174  						   * code qualifier
175  						   */
176  	u_int8_t		ces_source_type;  /*
177  						   * element type of
178  						   * source address
179  						   */
180  	u_int16_t		ces_source_addr;  /*
181  						   * source address of medium
182  						   */
183  	changer_voltag_t     	ces_pvoltag;	  /* primary volume tag */
184  	changer_voltag_t	ces_avoltag;	  /* alternate volume tag */
185  	u_int8_t		ces_scsi_id;	  /* SCSI id of element */
186  	u_int8_t		ces_scsi_lun;	  /* SCSI lun of element */
187  
188  	/*
189  	 * Data members for SMC3 and later versions
190  	 */
191  	u_int8_t		ces_medium_type;
192  #define	CES_MEDIUM_TYPE_UNKNOWN		0	/* Medium type unspecified */
193  #define	CES_MEDIUM_TYPE_DATA		1	/* Data medium */
194  #define	CES_MEDIUM_TYPE_CLEANING	2	/* Cleaning medium */
195  #define	CES_MEDIUM_TYPE_DIAGNOSTIC	3	/* Diagnostic medium */
196  #define	CES_MEDIUM_TYPE_WORM		4	/* WORM medium */
197  #define	CES_MEDIUM_TYPE_MICROCODE	5	/* Microcode image medium */
198  
199  	u_int8_t		ces_protocol_id;
200  #define	CES_PROTOCOL_ID_FCP_4	0	/* Fiber channel */
201  #define	CES_PROTOCOL_ID_SPI_5	1	/* Parallel SCSI */
202  #define	CES_PROTOCOL_ID_SSA_S3P	2	/* SSA */
203  #define	CES_PROTOCOL_ID_SBP_3	3	/* IEEE 1394 */
204  #define	CES_PROTOCOL_ID_SRP	4	/* SCSI Remote DMA */
205  #define	CES_PROTOCOL_ID_ISCSI	5	/* iSCSI */
206  #define	CES_PROTOCOL_ID_SPL	6	/* SAS */
207  #define	CES_PROTOCOL_ID_ADT_2	7	/* Automation/Drive Interface */
208  #define	CES_PROTOCOL_ID_ACS_2	8	/* ATA */
209  
210  	u_int8_t		ces_assoc;
211  #define	CES_ASSOC_LOGICAL_UNIT	0
212  #define	CES_ASSOC_TARGET_PORT	1
213  #define	CES_ASSOC_TARGET_DEVICE	2
214  
215  	u_int8_t		ces_designator_type;
216  #define	CES_DESIGNATOR_TYPE_VENDOR_SPECIFIC	0
217  #define	CES_DESIGNATOR_TYPE_T10_VENDOR_ID	1
218  #define	CES_DESIGNATOR_TYPE_EUI_64		2
219  #define	CES_DESIGNATOR_TYPE_NAA			3
220  #define	CES_DESIGNATOR_TYPE_TARGET_PORT_ID	4
221  #define	CES_DESIGNATOR_TYPE_TARGET_PORT_GRP	5
222  #define	CES_DESIGNATOR_TYPE_LOGICAL_UNIT_GRP	6
223  #define	CES_DESIGNATOR_TYPE_MD5_LOGICAL_UNIT_ID	7
224  #define	CES_DESIGNATOR_TYPE_SCSI_NAME_STRING	8
225  
226  	u_int8_t		ces_code_set;
227  #define	CES_CODE_SET_RESERVED	0
228  #define	CES_CODE_SET_BINARY	1
229  #define	CES_CODE_SET_ASCII	2
230  #define	CES_CODE_SET_UTF_8	3
231  
232  	u_int8_t		ces_designator_length;
233  
234  #define	CES_MAX_DESIGNATOR_LENGTH (1 << 8)
235  	u_int8_t		ces_designator[CES_MAX_DESIGNATOR_LENGTH + 1];
236  };
237  
238  struct changer_element_status_request {
239  	u_int16_t			cesr_element_type;
240  	u_int16_t			cesr_element_base;
241  	u_int16_t			cesr_element_count;
242  
243  	u_int16_t			cesr_flags;
244  #define	CESR_VOLTAGS	0x01
245  
246  	struct changer_element_status	*cesr_element_status;
247  };
248  
249  struct changer_set_voltag_request {
250  	u_int16_t		csvr_type;
251  	u_int16_t		csvr_addr;
252  
253  	u_int16_t		csvr_flags;
254  #define	CSVR_MODE_MASK		0x0f	/* mode mask, acceptable modes below: */
255  #define	CSVR_MODE_SET		0x00	/* set volume tag if not set */
256  #define	CSVR_MODE_REPLACE	0x01	/* unconditionally replace volume tag */
257  #define	CSVR_MODE_CLEAR		0x02	/* clear volume tag */
258  
259  #define	CSVR_ALTERNATE		0x10	/* set to work with alternate voltag */
260  
261  	changer_voltag_t     	csvr_voltag;
262  };
263  
264  #define	CESTATUS_BITS	\
265  	"\20\6INENAB\5EXENAB\4ACCESS\3EXCEPT\2IMPEXP\1FULL"
266  
267  #define	CHIOMOVE	_IOW('c', 0x01, struct changer_move)
268  #define	CHIOEXCHANGE	_IOW('c', 0x02, struct changer_exchange)
269  #define	CHIOPOSITION	_IOW('c', 0x03, struct changer_position)
270  #define	CHIOGPICKER	_IOR('c', 0x04, int)
271  #define	CHIOSPICKER	_IOW('c', 0x05, int)
272  #define	CHIOGPARAMS	_IOR('c', 0x06, struct changer_params)
273  #define	CHIOIELEM	_IOW('c', 0x07, u_int32_t)
274  #define	OCHIOGSTATUS	_IOW('c', 0x08, struct changer_element_status_request)
275  #define	CHIOSETVOLTAG	_IOW('c', 0x09, struct changer_set_voltag_request)
276  #define	CHIOGSTATUS	_IOW('c', 0x0A, struct changer_element_status_request)
277  
278  #endif /* !_SYS_CHIO_H_ */
279