xref: /linux/sound/soc/intel/boards/sof_wm8804.c (revision 3a39d672e7f48b8d6b91a09afa4b55352773b4b5)
1 // SPDX-License-Identifier: GPL-2.0-only
2 // Copyright (c) 2018-2020, Intel Corporation
3 //
4 // sof-wm8804.c - ASoC machine driver for Up and Up2 board
5 // based on WM8804/Hifiberry Digi+
6 
7 
8 #include <linux/acpi.h>
9 #include <linux/dmi.h>
10 #include <linux/gpio/consumer.h>
11 #include <linux/gpio/machine.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
14 #include <linux/slab.h>
15 #include <sound/pcm.h>
16 #include <sound/pcm_params.h>
17 #include <sound/soc.h>
18 #include <sound/soc-acpi.h>
19 #include "../../codecs/wm8804.h"
20 
21 struct sof_card_private {
22 	struct gpio_desc *gpio_44;
23 	struct gpio_desc *gpio_48;
24 	int sample_rate;
25 };
26 
27 #define SOF_WM8804_UP2_QUIRK			BIT(0)
28 
29 static unsigned long sof_wm8804_quirk;
30 
sof_wm8804_quirk_cb(const struct dmi_system_id * id)31 static int sof_wm8804_quirk_cb(const struct dmi_system_id *id)
32 {
33 	sof_wm8804_quirk = (unsigned long)id->driver_data;
34 	return 1;
35 }
36 
37 static const struct dmi_system_id sof_wm8804_quirk_table[] = {
38 	{
39 		.callback = sof_wm8804_quirk_cb,
40 		.matches = {
41 			DMI_MATCH(DMI_SYS_VENDOR, "AAEON"),
42 			DMI_MATCH(DMI_PRODUCT_NAME, "UP-APL01"),
43 		},
44 		.driver_data = (void *)SOF_WM8804_UP2_QUIRK,
45 	},
46 	{}
47 };
48 
sof_wm8804_hw_params(struct snd_pcm_substream * substream,struct snd_pcm_hw_params * params)49 static int sof_wm8804_hw_params(struct snd_pcm_substream *substream,
50 				struct snd_pcm_hw_params *params)
51 {
52 	struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
53 	struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
54 	struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
55 	struct snd_soc_component *codec = codec_dai->component;
56 	const int sysclk = 27000000; /* This is fixed on this board */
57 	int samplerate;
58 	long mclk_freq;
59 	int mclk_div;
60 	int sampling_freq;
61 	bool clk_44;
62 	int ret;
63 
64 	samplerate = params_rate(params);
65 	if (samplerate == ctx->sample_rate)
66 		return 0;
67 
68 	ctx->sample_rate = 0;
69 
70 	if (samplerate <= 96000) {
71 		mclk_freq = samplerate * 256;
72 		mclk_div = WM8804_MCLKDIV_256FS;
73 	} else {
74 		mclk_freq = samplerate * 128;
75 		mclk_div = WM8804_MCLKDIV_128FS;
76 	}
77 
78 	switch (samplerate) {
79 	case 32000:
80 		sampling_freq = 0x03;
81 		break;
82 	case 44100:
83 		sampling_freq = 0x00;
84 		break;
85 	case 48000:
86 		sampling_freq = 0x02;
87 		break;
88 	case 88200:
89 		sampling_freq = 0x08;
90 		break;
91 	case 96000:
92 		sampling_freq = 0x0a;
93 		break;
94 	case 176400:
95 		sampling_freq = 0x0c;
96 		break;
97 	case 192000:
98 		sampling_freq = 0x0e;
99 		break;
100 	default:
101 		dev_err(rtd->card->dev,
102 			"unsupported samplerate %d\n", samplerate);
103 		return -EINVAL;
104 	}
105 
106 	if (samplerate % 16000)
107 		clk_44 = true; /* use 44.1 kHz root frequency */
108 	else
109 		clk_44 = false;
110 
111 	if (!(IS_ERR_OR_NULL(ctx->gpio_44) ||
112 	      IS_ERR_OR_NULL(ctx->gpio_48))) {
113 		/*
114 		 * ensure both GPIOs are LOW first, then drive the
115 		 * relevant one to HIGH
116 		 */
117 		if (clk_44) {
118 			gpiod_set_value_cansleep(ctx->gpio_48, !clk_44);
119 			gpiod_set_value_cansleep(ctx->gpio_44, clk_44);
120 		} else {
121 			gpiod_set_value_cansleep(ctx->gpio_44, clk_44);
122 			gpiod_set_value_cansleep(ctx->gpio_48, !clk_44);
123 		}
124 	}
125 
126 	snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div);
127 	ret = snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq);
128 	if (ret < 0) {
129 		dev_err(rtd->card->dev, "Failed to set WM8804 PLL\n");
130 		return ret;
131 	}
132 
133 	ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL,
134 				     sysclk, SND_SOC_CLOCK_OUT);
135 	if (ret < 0) {
136 		dev_err(rtd->card->dev,
137 			"Failed to set WM8804 SYSCLK: %d\n", ret);
138 		return ret;
139 	}
140 
141 	/* set sampling frequency status bits */
142 	snd_soc_component_update_bits(codec, WM8804_SPDTX4, 0x0f,
143 				      sampling_freq);
144 
145 	ctx->sample_rate = samplerate;
146 
147 	return 0;
148 }
149 
150 /* machine stream operations */
151 static const struct snd_soc_ops sof_wm8804_ops = {
152 	.hw_params = sof_wm8804_hw_params,
153 };
154 
155 SND_SOC_DAILINK_DEF(ssp5_pin,
156 	DAILINK_COMP_ARRAY(COMP_CPU("SSP5 Pin")));
157 
158 SND_SOC_DAILINK_DEF(ssp5_codec,
159 	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-1AEC8804:00", "wm8804-spdif")));
160 
161 SND_SOC_DAILINK_DEF(platform,
162 	DAILINK_COMP_ARRAY(COMP_PLATFORM("0000:00:0e.0")));
163 
164 static struct snd_soc_dai_link dailink[] = {
165 	/* back ends */
166 	{
167 		.name = "SSP5-Codec",
168 		.id = 0,
169 		.no_pcm = 1,
170 		.dpcm_playback = 1,
171 		.dpcm_capture = 1,
172 		.ops = &sof_wm8804_ops,
173 		SND_SOC_DAILINK_REG(ssp5_pin, ssp5_codec, platform),
174 	},
175 };
176 
177 /* SoC card */
178 static struct snd_soc_card sof_wm8804_card = {
179 	.name = "wm8804", /* sof- prefix added automatically */
180 	.owner = THIS_MODULE,
181 	.dai_link = dailink,
182 	.num_links = ARRAY_SIZE(dailink),
183 };
184 
185  /* i2c-<HID>:00 with HID being 8 chars */
186 static char codec_name[SND_ACPI_I2C_ID_LEN];
187 
188 /*
189  * to control the HifiBerry Digi+ PRO, it's required to toggle GPIO to
190  * select the clock source. On the Up2 board, this means
191  * Pin29/BCM5/Linux GPIO 430 and Pin 31/BCM6/ Linux GPIO 404.
192  *
193  * Using the ACPI device name is not very nice, but since we only use
194  * the value for the Up2 board there is no risk of conflict with other
195  * platforms.
196  */
197 
198 static struct gpiod_lookup_table up2_gpios_table = {
199 	/* .dev_id is set during probe */
200 	.table = {
201 		GPIO_LOOKUP("INT3452:01", 73, "BCM-GPIO5", GPIO_ACTIVE_HIGH),
202 		GPIO_LOOKUP("INT3452:01", 74, "BCM-GPIO6", GPIO_ACTIVE_HIGH),
203 		{ },
204 	},
205 };
206 
sof_wm8804_probe(struct platform_device * pdev)207 static int sof_wm8804_probe(struct platform_device *pdev)
208 {
209 	struct snd_soc_card *card;
210 	struct snd_soc_acpi_mach *mach;
211 	struct sof_card_private *ctx;
212 	struct acpi_device *adev;
213 	int dai_index = 0;
214 	int ret;
215 	int i;
216 
217 	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
218 	if (!ctx)
219 		return -ENOMEM;
220 
221 	mach = pdev->dev.platform_data;
222 	card = &sof_wm8804_card;
223 	card->dev = &pdev->dev;
224 
225 	dmi_check_system(sof_wm8804_quirk_table);
226 
227 	if (sof_wm8804_quirk & SOF_WM8804_UP2_QUIRK) {
228 		up2_gpios_table.dev_id = dev_name(&pdev->dev);
229 		gpiod_add_lookup_table(&up2_gpios_table);
230 
231 		/*
232 		 * The gpios are required for specific boards with
233 		 * local oscillators, and optional in other cases.
234 		 * Since we can't identify when they are needed, use
235 		 * the GPIO as non-optional
236 		 */
237 
238 		ctx->gpio_44 = devm_gpiod_get(&pdev->dev, "BCM-GPIO5",
239 					      GPIOD_OUT_LOW);
240 		if (IS_ERR(ctx->gpio_44)) {
241 			ret = PTR_ERR(ctx->gpio_44);
242 			dev_err(&pdev->dev,
243 				"could not get BCM-GPIO5: %d\n",
244 				ret);
245 			return ret;
246 		}
247 
248 		ctx->gpio_48 = devm_gpiod_get(&pdev->dev, "BCM-GPIO6",
249 					      GPIOD_OUT_LOW);
250 		if (IS_ERR(ctx->gpio_48)) {
251 			ret = PTR_ERR(ctx->gpio_48);
252 			dev_err(&pdev->dev,
253 				"could not get BCM-GPIO6: %d\n",
254 				ret);
255 			return ret;
256 		}
257 	}
258 
259 	/* fix index of codec dai */
260 	for (i = 0; i < ARRAY_SIZE(dailink); i++) {
261 		if (!strcmp(dailink[i].codecs->name, "i2c-1AEC8804:00")) {
262 			dai_index = i;
263 			break;
264 		}
265 	}
266 
267 	/* fixup codec name based on HID */
268 	adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
269 	if (adev) {
270 		snprintf(codec_name, sizeof(codec_name),
271 			 "%s%s", "i2c-", acpi_dev_name(adev));
272 		dailink[dai_index].codecs->name = codec_name;
273 	} else {
274 		dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id);
275 		return -ENOENT;
276 	}
277 
278 	acpi_dev_put(adev);
279 
280 	snd_soc_card_set_drvdata(card, ctx);
281 
282 	return devm_snd_soc_register_card(&pdev->dev, card);
283 }
284 
sof_wm8804_remove(struct platform_device * pdev)285 static void sof_wm8804_remove(struct platform_device *pdev)
286 {
287 	if (sof_wm8804_quirk & SOF_WM8804_UP2_QUIRK)
288 		gpiod_remove_lookup_table(&up2_gpios_table);
289 }
290 
291 static struct platform_driver sof_wm8804_driver = {
292 	.driver = {
293 		.name = "sof-wm8804",
294 		.pm = &snd_soc_pm_ops,
295 	},
296 	.probe = sof_wm8804_probe,
297 	.remove = sof_wm8804_remove,
298 };
299 module_platform_driver(sof_wm8804_driver);
300 
301 MODULE_DESCRIPTION("ASoC Intel(R) SOF + WM8804 Machine driver");
302 MODULE_AUTHOR("Pierre-Louis Bossart");
303 MODULE_LICENSE("GPL v2");
304 MODULE_ALIAS("platform:sof-wm8804");
305