xref: /linux/sound/soc/intel/boards/cht_bsw_rt5672.c (revision 0fc8f6200d2313278fbf4539bbab74677c685531)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  cht_bsw_rt5672.c - ASoc Machine driver for Intel Cherryview-based platforms
4  *                     Cherrytrail and Braswell, with RT5672 codec.
5  *
6  *  Copyright (C) 2014 Intel Corp
7  *  Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
8  *          Mengdong Lin <mengdong.lin@intel.com>
9  */
10 
11 #include <linux/gpio/consumer.h>
12 #include <linux/input.h>
13 #include <linux/module.h>
14 #include <linux/platform_device.h>
15 #include <linux/slab.h>
16 #include <linux/clk.h>
17 #include <linux/string.h>
18 #include <sound/pcm.h>
19 #include <sound/pcm_params.h>
20 #include <sound/soc.h>
21 #include <sound/jack.h>
22 #include <sound/soc-acpi.h>
23 #include "../../codecs/rt5670.h"
24 #include "../atom/sst-atom-controls.h"
25 #include "../common/soc-intel-quirks.h"
26 
27 
28 /* The platform clock #3 outputs 19.2Mhz clock to codec as I2S MCLK */
29 #define CHT_PLAT_CLK_3_HZ	19200000
30 #define CHT_CODEC_DAI	"rt5670-aif1"
31 
32 struct cht_mc_private {
33 	struct snd_soc_jack headset;
34 	char codec_name[SND_ACPI_I2C_ID_LEN];
35 	struct clk *mclk;
36 	bool use_ssp0;
37 };
38 
39 /* Headset jack detection DAPM pins */
40 static struct snd_soc_jack_pin cht_bsw_headset_pins[] = {
41 	{
42 		.pin = "Headset Mic",
43 		.mask = SND_JACK_MICROPHONE,
44 	},
45 	{
46 		.pin = "Headphone",
47 		.mask = SND_JACK_HEADPHONE,
48 	},
49 };
50 
51 static int platform_clock_control(struct snd_soc_dapm_widget *w,
52 		struct snd_kcontrol *k, int  event)
53 {
54 	struct snd_soc_card *card = snd_soc_dapm_to_card(w->dapm);
55 	struct snd_soc_dai *codec_dai;
56 	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
57 	int ret;
58 
59 	codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI);
60 	if (!codec_dai) {
61 		dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n");
62 		return -EIO;
63 	}
64 
65 	if (SND_SOC_DAPM_EVENT_ON(event)) {
66 		if (ctx->mclk) {
67 			ret = clk_prepare_enable(ctx->mclk);
68 			if (ret < 0) {
69 				dev_err(card->dev,
70 					"could not configure MCLK state: %d\n", ret);
71 				return ret;
72 			}
73 		}
74 
75 		/* set codec PLL source to the 19.2MHz platform clock (MCLK) */
76 		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5670_PLL1_S_MCLK,
77 				CHT_PLAT_CLK_3_HZ, 48000 * 512);
78 		if (ret < 0) {
79 			dev_err(card->dev, "can't set codec pll: %d\n", ret);
80 			if (ctx->mclk)
81 				clk_disable_unprepare(ctx->mclk);
82 			return ret;
83 		}
84 
85 		/* set codec sysclk source to PLL */
86 		ret = snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_PLL1,
87 			48000 * 512, SND_SOC_CLOCK_IN);
88 		if (ret < 0) {
89 			dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
90 			if (ctx->mclk)
91 				clk_disable_unprepare(ctx->mclk);
92 			return ret;
93 		}
94 	} else {
95 		/* Set codec sysclk source to its internal clock because codec
96 		 * PLL will be off when idle and MCLK will also be off by ACPI
97 		 * when codec is runtime suspended. Codec needs clock for jack
98 		 * detection and button press.
99 		 */
100 		ret = snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_RCCLK,
101 					     48000 * 512, SND_SOC_CLOCK_IN);
102 		if (ret < 0) {
103 			dev_err(card->dev, "failed to set codec sysclk: %d\n", ret);
104 			return ret;
105 		}
106 
107 		if (ctx->mclk)
108 			clk_disable_unprepare(ctx->mclk);
109 	}
110 	return 0;
111 }
112 
113 static const struct snd_soc_dapm_widget cht_dapm_widgets[] = {
114 	SND_SOC_DAPM_HP("Headphone", NULL),
115 	SND_SOC_DAPM_MIC("Headset Mic", NULL),
116 	SND_SOC_DAPM_MIC("Int Mic", NULL),
117 	SND_SOC_DAPM_SPK("Ext Spk", NULL),
118 	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
119 			platform_clock_control, SND_SOC_DAPM_PRE_PMU |
120 			SND_SOC_DAPM_POST_PMD),
121 };
122 
123 static const struct snd_soc_dapm_route cht_audio_map[] = {
124 	{"IN1P", NULL, "Headset Mic"},
125 	{"IN1N", NULL, "Headset Mic"},
126 	{"DMIC L1", NULL, "Int Mic"},
127 	{"DMIC R1", NULL, "Int Mic"},
128 	{"Headphone", NULL, "HPOL"},
129 	{"Headphone", NULL, "HPOR"},
130 	{"Ext Spk", NULL, "SPOLP"},
131 	{"Ext Spk", NULL, "SPOLN"},
132 	{"Ext Spk", NULL, "SPORP"},
133 	{"Ext Spk", NULL, "SPORN"},
134 	{"Headphone", NULL, "Platform Clock"},
135 	{"Headset Mic", NULL, "Platform Clock"},
136 	{"Int Mic", NULL, "Platform Clock"},
137 	{"Ext Spk", NULL, "Platform Clock"},
138 };
139 
140 static const struct snd_soc_dapm_route cht_audio_ssp0_map[] = {
141 	{"AIF1 Playback", NULL, "ssp0 Tx"},
142 	{"ssp0 Tx", NULL, "modem_out"},
143 	{"modem_in", NULL, "ssp0 Rx"},
144 	{"ssp0 Rx", NULL, "AIF1 Capture"},
145 };
146 
147 static const struct snd_soc_dapm_route cht_audio_ssp2_map[] = {
148 	{"AIF1 Playback", NULL, "ssp2 Tx"},
149 	{"ssp2 Tx", NULL, "codec_out0"},
150 	{"ssp2 Tx", NULL, "codec_out1"},
151 	{"codec_in0", NULL, "ssp2 Rx"},
152 	{"codec_in1", NULL, "ssp2 Rx"},
153 	{"ssp2 Rx", NULL, "AIF1 Capture"},
154 };
155 
156 static const struct snd_kcontrol_new cht_mc_controls[] = {
157 	SOC_DAPM_PIN_SWITCH("Headphone"),
158 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
159 	SOC_DAPM_PIN_SWITCH("Int Mic"),
160 	SOC_DAPM_PIN_SWITCH("Ext Spk"),
161 };
162 
163 static int cht_aif1_hw_params(struct snd_pcm_substream *substream,
164 					struct snd_pcm_hw_params *params)
165 {
166 	struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
167 	struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(rtd, 0);
168 	int ret;
169 
170 	/* set codec PLL source to the 19.2MHz platform clock (MCLK) */
171 	ret = snd_soc_dai_set_pll(codec_dai, 0, RT5670_PLL1_S_MCLK,
172 				  CHT_PLAT_CLK_3_HZ, params_rate(params) * 512);
173 	if (ret < 0) {
174 		dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
175 		return ret;
176 	}
177 
178 	/* set codec sysclk source to PLL */
179 	ret = snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_PLL1,
180 				     params_rate(params) * 512,
181 				     SND_SOC_CLOCK_IN);
182 	if (ret < 0) {
183 		dev_err(rtd->dev, "can't set codec sysclk: %d\n", ret);
184 		return ret;
185 	}
186 	return 0;
187 }
188 
189 static const struct acpi_gpio_params headset_gpios = { 0, 0, false };
190 
191 static const struct acpi_gpio_mapping cht_rt5672_gpios[] = {
192 	{ "headset-gpios", &headset_gpios, 1 },
193 	{},
194 };
195 
196 static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
197 {
198 	int ret;
199 	struct snd_soc_dapm_context *dapm = snd_soc_card_to_dapm(runtime->card);
200 	struct snd_soc_dai *codec_dai = snd_soc_rtd_to_codec(runtime, 0);
201 	struct snd_soc_component *component = codec_dai->component;
202 	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card);
203 
204 	if (devm_acpi_dev_add_driver_gpios(component->dev, cht_rt5672_gpios))
205 		dev_warn(runtime->dev, "Unable to add GPIO mapping table\n");
206 
207 	/* Select codec ASRC clock source to track I2S1 clock, because codec
208 	 * is in slave mode and 100fs I2S format (BCLK = 100 * LRCLK) cannot
209 	 * be supported by RT5672. Otherwise, ASRC will be disabled and cause
210 	 * noise.
211 	 */
212 	rt5670_sel_asrc_clk_src(component,
213 				RT5670_DA_STEREO_FILTER
214 				| RT5670_DA_MONO_L_FILTER
215 				| RT5670_DA_MONO_R_FILTER
216 				| RT5670_AD_STEREO_FILTER
217 				| RT5670_AD_MONO_L_FILTER
218 				| RT5670_AD_MONO_R_FILTER,
219 				RT5670_CLK_SEL_I2S1_ASRC);
220 
221 	if (ctx->use_ssp0) {
222 		ret = snd_soc_dapm_add_routes(dapm,
223 					      cht_audio_ssp0_map,
224 					      ARRAY_SIZE(cht_audio_ssp0_map));
225 	} else {
226 		ret = snd_soc_dapm_add_routes(dapm,
227 					      cht_audio_ssp2_map,
228 					      ARRAY_SIZE(cht_audio_ssp2_map));
229 	}
230 	if (ret)
231 		return ret;
232 
233 	ret = snd_soc_card_jack_new_pins(runtime->card, "Headset",
234 					 SND_JACK_HEADSET | SND_JACK_BTN_0 |
235 					 SND_JACK_BTN_1 | SND_JACK_BTN_2,
236 					 &ctx->headset,
237 					 cht_bsw_headset_pins,
238 					 ARRAY_SIZE(cht_bsw_headset_pins));
239         if (ret)
240                 return ret;
241 
242 	snd_jack_set_key(ctx->headset.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
243 	snd_jack_set_key(ctx->headset.jack, SND_JACK_BTN_1, KEY_VOLUMEUP);
244 	snd_jack_set_key(ctx->headset.jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN);
245 
246 	rt5670_set_jack_detect(component, &ctx->headset);
247 	if (ctx->mclk) {
248 		/*
249 		 * The firmware might enable the clock at
250 		 * boot (this information may or may not
251 		 * be reflected in the enable clock register).
252 		 * To change the rate we must disable the clock
253 		 * first to cover these cases. Due to common
254 		 * clock framework restrictions that do not allow
255 		 * to disable a clock that has not been enabled,
256 		 * we need to enable the clock first.
257 		 */
258 		ret = clk_prepare_enable(ctx->mclk);
259 		if (!ret)
260 			clk_disable_unprepare(ctx->mclk);
261 
262 		ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ);
263 
264 		if (ret) {
265 			dev_err(runtime->dev, "unable to set MCLK rate\n");
266 			return ret;
267 		}
268 	}
269 	return 0;
270 }
271 
272 static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd,
273 			    struct snd_pcm_hw_params *params)
274 {
275 	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(rtd->card);
276 	struct snd_interval *rate = hw_param_interval(params,
277 			SNDRV_PCM_HW_PARAM_RATE);
278 	struct snd_interval *channels = hw_param_interval(params,
279 						SNDRV_PCM_HW_PARAM_CHANNELS);
280 	int ret, bits;
281 
282 	/* The DSP will convert the FE rate to 48k, stereo, 24bits */
283 	rate->min = rate->max = 48000;
284 	channels->min = channels->max = 2;
285 
286 	if (ctx->use_ssp0) {
287 		/* set SSP0 to 16-bit */
288 		params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
289 		bits = 16;
290 	} else {
291 		/* set SSP2 to 24-bit */
292 		params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
293 		bits = 24;
294 	}
295 
296 	/*
297 	 * The default mode for the cpu-dai is TDM 4 slot. The default mode
298 	 * for the codec-dai is I2S. So we need to either set the cpu-dai to
299 	 * I2S mode to match the codec-dai, or set the codec-dai to TDM 4 slot
300 	 * (or program both to yet another mode).
301 	 * One board, the Lenovo Miix 2 10, uses not 1 but 2 codecs connected
302 	 * to SSP2. The second piggy-backed, output-only codec is inside the
303 	 * keyboard-dock (which has extra speakers). Unlike the main rt5672
304 	 * codec, we cannot configure this codec, it is hard coded to use
305 	 * 2 channel 24 bit I2S. For this to work we must use I2S mode on this
306 	 * board. Since we only support 2 channels anyways, there is no need
307 	 * for TDM on any cht-bsw-rt5672 designs. So we use I2S 2ch everywhere.
308 	 */
309 	ret = snd_soc_dai_set_fmt(snd_soc_rtd_to_cpu(rtd, 0),
310 				  SND_SOC_DAIFMT_I2S     |
311 				  SND_SOC_DAIFMT_NB_NF   |
312 				  SND_SOC_DAIFMT_BP_FP);
313 	if (ret < 0) {
314 		dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
315 		return ret;
316 	}
317 
318 	ret = snd_soc_dai_set_tdm_slot(snd_soc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, bits);
319 	if (ret < 0) {
320 		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
321 		return ret;
322 	}
323 
324 	return 0;
325 }
326 
327 static int cht_aif1_startup(struct snd_pcm_substream *substream)
328 {
329 	return snd_pcm_hw_constraint_single(substream->runtime,
330 			SNDRV_PCM_HW_PARAM_RATE, 48000);
331 }
332 
333 static const struct snd_soc_ops cht_aif1_ops = {
334 	.startup = cht_aif1_startup,
335 };
336 
337 static const struct snd_soc_ops cht_be_ssp2_ops = {
338 	.hw_params = cht_aif1_hw_params,
339 };
340 
341 SND_SOC_DAILINK_DEF(dummy,
342 	DAILINK_COMP_ARRAY(COMP_DUMMY()));
343 
344 SND_SOC_DAILINK_DEF(media,
345 	DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai")));
346 
347 SND_SOC_DAILINK_DEF(deepbuffer,
348 	DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai")));
349 
350 SND_SOC_DAILINK_DEF(ssp2_port,
351 	DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port")));
352 SND_SOC_DAILINK_DEF(ssp2_codec,
353 	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-10EC5670:00",
354 				      "rt5670-aif1")));
355 
356 SND_SOC_DAILINK_DEF(platform,
357 	DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform")));
358 
359 static struct snd_soc_dai_link cht_dailink[] = {
360 	/* Front End DAI links */
361 	[MERR_DPCM_AUDIO] = {
362 		.name = "Audio Port",
363 		.stream_name = "Audio",
364 		.nonatomic = true,
365 		.dynamic = 1,
366 		.ops = &cht_aif1_ops,
367 		SND_SOC_DAILINK_REG(media, dummy, platform),
368 	},
369 	[MERR_DPCM_DEEP_BUFFER] = {
370 		.name = "Deep-Buffer Audio Port",
371 		.stream_name = "Deep-Buffer Audio",
372 		.nonatomic = true,
373 		.dynamic = 1,
374 		.playback_only = 1,
375 		.ops = &cht_aif1_ops,
376 		SND_SOC_DAILINK_REG(deepbuffer, dummy, platform),
377 	},
378 
379 	/* Back End DAI links */
380 	{
381 		/* SSP2 - Codec */
382 		.name = "SSP2-Codec",
383 		.id = 0,
384 		.no_pcm = 1,
385 		.init = cht_codec_init,
386 		.be_hw_params_fixup = cht_codec_fixup,
387 		.ops = &cht_be_ssp2_ops,
388 		SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform),
389 	},
390 };
391 
392 static int cht_suspend_pre(struct snd_soc_card *card)
393 {
394 	struct snd_soc_component *component;
395 	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
396 
397 	for_each_card_components(card, component) {
398 		if (!strncmp(component->name,
399 			     ctx->codec_name, sizeof(ctx->codec_name))) {
400 
401 			dev_dbg(component->dev, "disabling jack detect before going to suspend.\n");
402 			rt5670_jack_suspend(component);
403 			break;
404 		}
405 	}
406 	return 0;
407 }
408 
409 static int cht_resume_post(struct snd_soc_card *card)
410 {
411 	struct snd_soc_component *component;
412 	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
413 
414 	for_each_card_components(card, component) {
415 		if (!strncmp(component->name,
416 			     ctx->codec_name, sizeof(ctx->codec_name))) {
417 
418 			dev_dbg(component->dev, "enabling jack detect for resume.\n");
419 			rt5670_jack_resume(component);
420 			break;
421 		}
422 	}
423 
424 	return 0;
425 }
426 
427 /* use space before codec name to simplify card ID, and simplify driver name */
428 #define SOF_CARD_NAME "bytcht rt5672" /* card name will be 'sof-bytcht rt5672' */
429 #define SOF_DRIVER_NAME "SOF"
430 
431 #define CARD_NAME "cht-bsw-rt5672"
432 #define DRIVER_NAME NULL /* card name will be used for driver name */
433 
434 /* SoC card */
435 static struct snd_soc_card snd_soc_card_cht = {
436 	.owner = THIS_MODULE,
437 	.dai_link = cht_dailink,
438 	.num_links = ARRAY_SIZE(cht_dailink),
439 	.dapm_widgets = cht_dapm_widgets,
440 	.num_dapm_widgets = ARRAY_SIZE(cht_dapm_widgets),
441 	.dapm_routes = cht_audio_map,
442 	.num_dapm_routes = ARRAY_SIZE(cht_audio_map),
443 	.controls = cht_mc_controls,
444 	.num_controls = ARRAY_SIZE(cht_mc_controls),
445 	.suspend_pre = cht_suspend_pre,
446 	.resume_post = cht_resume_post,
447 };
448 
449 #define RT5672_I2C_DEFAULT	"i2c-10EC5670:00"
450 
451 static int snd_cht_mc_probe(struct platform_device *pdev)
452 {
453 	int ret_val = 0;
454 	struct cht_mc_private *drv;
455 	struct snd_soc_acpi_mach *mach = pdev->dev.platform_data;
456 	const char *platform_name;
457 	struct acpi_device *adev;
458 	bool sof_parent;
459 	int dai_index = 0;
460 	int i;
461 
462 	drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
463 	if (!drv)
464 		return -ENOMEM;
465 
466 	strscpy(drv->codec_name, RT5672_I2C_DEFAULT, sizeof(drv->codec_name));
467 
468 	/* find index of codec dai */
469 	for (i = 0; i < ARRAY_SIZE(cht_dailink); i++) {
470 		if (cht_dailink[i].num_codecs &&
471 		    !strcmp(cht_dailink[i].codecs->name, RT5672_I2C_DEFAULT)) {
472 			dai_index = i;
473 			break;
474 		}
475 	}
476 
477 	/* fixup codec name based on HID */
478 	adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
479 	if (adev) {
480 		snprintf(drv->codec_name, sizeof(drv->codec_name),
481 			 "i2c-%s", acpi_dev_name(adev));
482 		cht_dailink[dai_index].codecs->name = drv->codec_name;
483 	}  else {
484 		dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id);
485 		return -ENOENT;
486 	}
487 
488 	acpi_dev_put(adev);
489 
490 	/* Use SSP0 on Bay Trail CR devices */
491 	if (soc_intel_is_byt() && mach->mach_params.acpi_ipc_irq_index == 0) {
492 		cht_dailink[dai_index].cpus->dai_name = "ssp0-port";
493 		drv->use_ssp0 = true;
494 	}
495 
496 	/* override platform name, if required */
497 	snd_soc_card_cht.dev = &pdev->dev;
498 	platform_name = mach->mach_params.platform;
499 
500 	ret_val = snd_soc_fixup_dai_links_platform_name(&snd_soc_card_cht,
501 							platform_name);
502 	if (ret_val)
503 		return ret_val;
504 
505 	snd_soc_card_cht.components = rt5670_components();
506 
507 	drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
508 	if (IS_ERR(drv->mclk)) {
509 		dev_err(&pdev->dev,
510 			"Failed to get MCLK from pmc_plt_clk_3: %ld\n",
511 			PTR_ERR(drv->mclk));
512 		return PTR_ERR(drv->mclk);
513 	}
514 	snd_soc_card_set_drvdata(&snd_soc_card_cht, drv);
515 
516 	sof_parent = snd_soc_acpi_sof_parent(&pdev->dev);
517 
518 	/* set card and driver name */
519 	if (sof_parent) {
520 		snd_soc_card_cht.name = SOF_CARD_NAME;
521 		snd_soc_card_cht.driver_name = SOF_DRIVER_NAME;
522 	} else {
523 		snd_soc_card_cht.name = CARD_NAME;
524 		snd_soc_card_cht.driver_name = DRIVER_NAME;
525 	}
526 
527 	/* set pm ops */
528 	if (sof_parent)
529 		pdev->dev.driver->pm = &snd_soc_pm_ops;
530 
531 	/* register the soc card */
532 	ret_val = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_cht);
533 	if (ret_val) {
534 		dev_err(&pdev->dev,
535 			"snd_soc_register_card failed %d\n", ret_val);
536 		return ret_val;
537 	}
538 	platform_set_drvdata(pdev, &snd_soc_card_cht);
539 	return ret_val;
540 }
541 
542 static struct platform_driver snd_cht_mc_driver = {
543 	.driver = {
544 		.name = "cht-bsw-rt5672",
545 	},
546 	.probe = snd_cht_mc_probe,
547 };
548 
549 module_platform_driver(snd_cht_mc_driver);
550 
551 MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver");
552 MODULE_AUTHOR("Subhransu S. Prusty, Mengdong Lin");
553 MODULE_LICENSE("GPL v2");
554 MODULE_ALIAS("platform:cht-bsw-rt5672");
555