xref: /linux/drivers/reset/reset-brcmstb.c (revision 06d07429858317ded2db7986113a9e0129cd599b)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Broadcom STB generic reset controller for SW_INIT style reset controller
4  *
5  * Author: Florian Fainelli <f.fainelli@gmail.com>
6  * Copyright (C) 2018 Broadcom
7  */
8 #include <linux/delay.h>
9 #include <linux/device.h>
10 #include <linux/io.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/platform_device.h>
14 #include <linux/reset-controller.h>
15 #include <linux/types.h>
16 
17 struct brcmstb_reset {
18 	void __iomem *base;
19 	struct reset_controller_dev rcdev;
20 };
21 
22 #define SW_INIT_SET		0x00
23 #define SW_INIT_CLEAR		0x04
24 #define SW_INIT_STATUS		0x08
25 
26 #define SW_INIT_BIT(id)		BIT((id) & 0x1f)
27 #define SW_INIT_BANK(id)	((id) >> 5)
28 
29 /* A full bank contains extra registers that we are not utilizing but still
30  * qualify as a single bank.
31  */
32 #define SW_INIT_BANK_SIZE	0x18
33 
34 static inline
to_brcmstb(struct reset_controller_dev * rcdev)35 struct brcmstb_reset *to_brcmstb(struct reset_controller_dev *rcdev)
36 {
37 	return container_of(rcdev, struct brcmstb_reset, rcdev);
38 }
39 
brcmstb_reset_assert(struct reset_controller_dev * rcdev,unsigned long id)40 static int brcmstb_reset_assert(struct reset_controller_dev *rcdev,
41 				unsigned long id)
42 {
43 	unsigned int off = SW_INIT_BANK(id) * SW_INIT_BANK_SIZE;
44 	struct brcmstb_reset *priv = to_brcmstb(rcdev);
45 
46 	writel_relaxed(SW_INIT_BIT(id), priv->base + off + SW_INIT_SET);
47 
48 	return 0;
49 }
50 
brcmstb_reset_deassert(struct reset_controller_dev * rcdev,unsigned long id)51 static int brcmstb_reset_deassert(struct reset_controller_dev *rcdev,
52 				  unsigned long id)
53 {
54 	unsigned int off = SW_INIT_BANK(id) * SW_INIT_BANK_SIZE;
55 	struct brcmstb_reset *priv = to_brcmstb(rcdev);
56 
57 	writel_relaxed(SW_INIT_BIT(id), priv->base + off + SW_INIT_CLEAR);
58 	/* Maximum reset delay after de-asserting a line and seeing block
59 	 * operation is typically 14us for the worst case, build some slack
60 	 * here.
61 	 */
62 	usleep_range(100, 200);
63 
64 	return 0;
65 }
66 
brcmstb_reset_status(struct reset_controller_dev * rcdev,unsigned long id)67 static int brcmstb_reset_status(struct reset_controller_dev *rcdev,
68 				unsigned long id)
69 {
70 	unsigned int off = SW_INIT_BANK(id) * SW_INIT_BANK_SIZE;
71 	struct brcmstb_reset *priv = to_brcmstb(rcdev);
72 
73 	return readl_relaxed(priv->base + off + SW_INIT_STATUS) &
74 			     SW_INIT_BIT(id);
75 }
76 
77 static const struct reset_control_ops brcmstb_reset_ops = {
78 	.assert	= brcmstb_reset_assert,
79 	.deassert = brcmstb_reset_deassert,
80 	.status = brcmstb_reset_status,
81 };
82 
brcmstb_reset_probe(struct platform_device * pdev)83 static int brcmstb_reset_probe(struct platform_device *pdev)
84 {
85 	struct device *kdev = &pdev->dev;
86 	struct brcmstb_reset *priv;
87 	struct resource *res;
88 
89 	priv = devm_kzalloc(kdev, sizeof(*priv), GFP_KERNEL);
90 	if (!priv)
91 		return -ENOMEM;
92 
93 	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
94 	if (IS_ERR(priv->base))
95 		return PTR_ERR(priv->base);
96 
97 	dev_set_drvdata(kdev, priv);
98 
99 	priv->rcdev.owner = THIS_MODULE;
100 	priv->rcdev.nr_resets = DIV_ROUND_DOWN_ULL(resource_size(res),
101 						   SW_INIT_BANK_SIZE) * 32;
102 	priv->rcdev.ops = &brcmstb_reset_ops;
103 	priv->rcdev.of_node = kdev->of_node;
104 	/* Use defaults: 1 cell and simple xlate function */
105 
106 	return devm_reset_controller_register(kdev, &priv->rcdev);
107 }
108 
109 static const struct of_device_id brcmstb_reset_of_match[] = {
110 	{ .compatible = "brcm,brcmstb-reset" },
111 	{ /* sentinel */ }
112 };
113 MODULE_DEVICE_TABLE(of, brcmstb_reset_of_match);
114 
115 static struct platform_driver brcmstb_reset_driver = {
116 	.probe	= brcmstb_reset_probe,
117 	.driver	= {
118 		.name = "brcmstb-reset",
119 		.of_match_table = brcmstb_reset_of_match,
120 	},
121 };
122 module_platform_driver(brcmstb_reset_driver);
123 
124 MODULE_AUTHOR("Broadcom");
125 MODULE_DESCRIPTION("Broadcom STB reset controller");
126 MODULE_LICENSE("GPL");
127