1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * ntc_thermistor.c - NTC Thermistors
4 *
5 * Copyright (C) 2010 Samsung Electronics
6 * MyungJoo Ham <myungjoo.ham@samsung.com>
7 */
8
9 #include <linux/slab.h>
10 #include <linux/module.h>
11 #include <linux/math64.h>
12 #include <linux/mod_devicetable.h>
13 #include <linux/platform_device.h>
14 #include <linux/property.h>
15 #include <linux/err.h>
16 #include <linux/fixp-arith.h>
17 #include <linux/iio/consumer.h>
18 #include <linux/hwmon.h>
19
20 enum ntc_thermistor_type {
21 TYPE_B57330V2103,
22 TYPE_B57891S0103,
23 TYPE_NCPXXWB473,
24 TYPE_NCPXXWF104,
25 TYPE_NCPXXWL333,
26 TYPE_NCPXXXH103,
27 };
28
29 struct ntc_compensation {
30 int temp_c;
31 unsigned int ohm;
32 };
33
34 /*
35 * Used as index in a zero-terminated array, holes not allowed so
36 * that NTC_LAST is the first empty array entry.
37 */
38 enum {
39 NTC_B57330V2103,
40 NTC_B57891S0103,
41 NTC_NCP03WB473,
42 NTC_NCP03WF104,
43 NTC_NCP15WB473,
44 NTC_NCP15WL333,
45 NTC_NCP15XH103,
46 NTC_NCP18WB473,
47 NTC_NCP21WB473,
48 NTC_SSG1404001221,
49 NTC_LAST,
50 };
51
52 static const struct platform_device_id ntc_thermistor_id[] = {
53 [NTC_B57330V2103] = { "b57330v2103", TYPE_B57330V2103 },
54 [NTC_B57891S0103] = { "b57891s0103", TYPE_B57891S0103 },
55 [NTC_NCP03WB473] = { "ncp03wb473", TYPE_NCPXXWB473 },
56 [NTC_NCP03WF104] = { "ncp03wf104", TYPE_NCPXXWF104 },
57 [NTC_NCP15WB473] = { "ncp15wb473", TYPE_NCPXXWB473 },
58 [NTC_NCP15WL333] = { "ncp15wl333", TYPE_NCPXXWL333 },
59 [NTC_NCP15XH103] = { "ncp15xh103", TYPE_NCPXXXH103 },
60 [NTC_NCP18WB473] = { "ncp18wb473", TYPE_NCPXXWB473 },
61 [NTC_NCP21WB473] = { "ncp21wb473", TYPE_NCPXXWB473 },
62 [NTC_SSG1404001221] = { "ssg1404_001221", TYPE_NCPXXWB473 },
63 [NTC_LAST] = { },
64 };
65 MODULE_DEVICE_TABLE(platform, ntc_thermistor_id);
66
67 /*
68 * A compensation table should be sorted by the values of .ohm
69 * in descending order.
70 * The following compensation tables are from the specification of Murata NTC
71 * Thermistors Datasheet
72 */
73 static const struct ntc_compensation ncpXXwb473[] = {
74 { .temp_c = -40, .ohm = 1747920 },
75 { .temp_c = -35, .ohm = 1245428 },
76 { .temp_c = -30, .ohm = 898485 },
77 { .temp_c = -25, .ohm = 655802 },
78 { .temp_c = -20, .ohm = 483954 },
79 { .temp_c = -15, .ohm = 360850 },
80 { .temp_c = -10, .ohm = 271697 },
81 { .temp_c = -5, .ohm = 206463 },
82 { .temp_c = 0, .ohm = 158214 },
83 { .temp_c = 5, .ohm = 122259 },
84 { .temp_c = 10, .ohm = 95227 },
85 { .temp_c = 15, .ohm = 74730 },
86 { .temp_c = 20, .ohm = 59065 },
87 { .temp_c = 25, .ohm = 47000 },
88 { .temp_c = 30, .ohm = 37643 },
89 { .temp_c = 35, .ohm = 30334 },
90 { .temp_c = 40, .ohm = 24591 },
91 { .temp_c = 45, .ohm = 20048 },
92 { .temp_c = 50, .ohm = 16433 },
93 { .temp_c = 55, .ohm = 13539 },
94 { .temp_c = 60, .ohm = 11209 },
95 { .temp_c = 65, .ohm = 9328 },
96 { .temp_c = 70, .ohm = 7798 },
97 { .temp_c = 75, .ohm = 6544 },
98 { .temp_c = 80, .ohm = 5518 },
99 { .temp_c = 85, .ohm = 4674 },
100 { .temp_c = 90, .ohm = 3972 },
101 { .temp_c = 95, .ohm = 3388 },
102 { .temp_c = 100, .ohm = 2902 },
103 { .temp_c = 105, .ohm = 2494 },
104 { .temp_c = 110, .ohm = 2150 },
105 { .temp_c = 115, .ohm = 1860 },
106 { .temp_c = 120, .ohm = 1615 },
107 { .temp_c = 125, .ohm = 1406 },
108 };
109 static const struct ntc_compensation ncpXXwl333[] = {
110 { .temp_c = -40, .ohm = 1610154 },
111 { .temp_c = -35, .ohm = 1130850 },
112 { .temp_c = -30, .ohm = 802609 },
113 { .temp_c = -25, .ohm = 575385 },
114 { .temp_c = -20, .ohm = 416464 },
115 { .temp_c = -15, .ohm = 304219 },
116 { .temp_c = -10, .ohm = 224193 },
117 { .temp_c = -5, .ohm = 166623 },
118 { .temp_c = 0, .ohm = 124850 },
119 { .temp_c = 5, .ohm = 94287 },
120 { .temp_c = 10, .ohm = 71747 },
121 { .temp_c = 15, .ohm = 54996 },
122 { .temp_c = 20, .ohm = 42455 },
123 { .temp_c = 25, .ohm = 33000 },
124 { .temp_c = 30, .ohm = 25822 },
125 { .temp_c = 35, .ohm = 20335 },
126 { .temp_c = 40, .ohm = 16115 },
127 { .temp_c = 45, .ohm = 12849 },
128 { .temp_c = 50, .ohm = 10306 },
129 { .temp_c = 55, .ohm = 8314 },
130 { .temp_c = 60, .ohm = 6746 },
131 { .temp_c = 65, .ohm = 5503 },
132 { .temp_c = 70, .ohm = 4513 },
133 { .temp_c = 75, .ohm = 3721 },
134 { .temp_c = 80, .ohm = 3084 },
135 { .temp_c = 85, .ohm = 2569 },
136 { .temp_c = 90, .ohm = 2151 },
137 { .temp_c = 95, .ohm = 1809 },
138 { .temp_c = 100, .ohm = 1529 },
139 { .temp_c = 105, .ohm = 1299 },
140 { .temp_c = 110, .ohm = 1108 },
141 { .temp_c = 115, .ohm = 949 },
142 { .temp_c = 120, .ohm = 817 },
143 { .temp_c = 125, .ohm = 707 },
144 };
145
146 static const struct ntc_compensation ncpXXwf104[] = {
147 { .temp_c = -40, .ohm = 4397119 },
148 { .temp_c = -35, .ohm = 3088599 },
149 { .temp_c = -30, .ohm = 2197225 },
150 { .temp_c = -25, .ohm = 1581881 },
151 { .temp_c = -20, .ohm = 1151037 },
152 { .temp_c = -15, .ohm = 846579 },
153 { .temp_c = -10, .ohm = 628988 },
154 { .temp_c = -5, .ohm = 471632 },
155 { .temp_c = 0, .ohm = 357012 },
156 { .temp_c = 5, .ohm = 272500 },
157 { .temp_c = 10, .ohm = 209710 },
158 { .temp_c = 15, .ohm = 162651 },
159 { .temp_c = 20, .ohm = 127080 },
160 { .temp_c = 25, .ohm = 100000 },
161 { .temp_c = 30, .ohm = 79222 },
162 { .temp_c = 35, .ohm = 63167 },
163 { .temp_c = 40, .ohm = 50677 },
164 { .temp_c = 45, .ohm = 40904 },
165 { .temp_c = 50, .ohm = 33195 },
166 { .temp_c = 55, .ohm = 27091 },
167 { .temp_c = 60, .ohm = 22224 },
168 { .temp_c = 65, .ohm = 18323 },
169 { .temp_c = 70, .ohm = 15184 },
170 { .temp_c = 75, .ohm = 12635 },
171 { .temp_c = 80, .ohm = 10566 },
172 { .temp_c = 85, .ohm = 8873 },
173 { .temp_c = 90, .ohm = 7481 },
174 { .temp_c = 95, .ohm = 6337 },
175 { .temp_c = 100, .ohm = 5384 },
176 { .temp_c = 105, .ohm = 4594 },
177 { .temp_c = 110, .ohm = 3934 },
178 { .temp_c = 115, .ohm = 3380 },
179 { .temp_c = 120, .ohm = 2916 },
180 { .temp_c = 125, .ohm = 2522 },
181 };
182
183 static const struct ntc_compensation ncpXXxh103[] = {
184 { .temp_c = -40, .ohm = 247565 },
185 { .temp_c = -35, .ohm = 181742 },
186 { .temp_c = -30, .ohm = 135128 },
187 { .temp_c = -25, .ohm = 101678 },
188 { .temp_c = -20, .ohm = 77373 },
189 { .temp_c = -15, .ohm = 59504 },
190 { .temp_c = -10, .ohm = 46222 },
191 { .temp_c = -5, .ohm = 36244 },
192 { .temp_c = 0, .ohm = 28674 },
193 { .temp_c = 5, .ohm = 22878 },
194 { .temp_c = 10, .ohm = 18399 },
195 { .temp_c = 15, .ohm = 14910 },
196 { .temp_c = 20, .ohm = 12169 },
197 { .temp_c = 25, .ohm = 10000 },
198 { .temp_c = 30, .ohm = 8271 },
199 { .temp_c = 35, .ohm = 6883 },
200 { .temp_c = 40, .ohm = 5762 },
201 { .temp_c = 45, .ohm = 4851 },
202 { .temp_c = 50, .ohm = 4105 },
203 { .temp_c = 55, .ohm = 3492 },
204 { .temp_c = 60, .ohm = 2985 },
205 { .temp_c = 65, .ohm = 2563 },
206 { .temp_c = 70, .ohm = 2211 },
207 { .temp_c = 75, .ohm = 1915 },
208 { .temp_c = 80, .ohm = 1666 },
209 { .temp_c = 85, .ohm = 1454 },
210 { .temp_c = 90, .ohm = 1275 },
211 { .temp_c = 95, .ohm = 1121 },
212 { .temp_c = 100, .ohm = 990 },
213 { .temp_c = 105, .ohm = 876 },
214 { .temp_c = 110, .ohm = 779 },
215 { .temp_c = 115, .ohm = 694 },
216 { .temp_c = 120, .ohm = 620 },
217 { .temp_c = 125, .ohm = 556 },
218 };
219
220 /*
221 * The following compensation tables are from the specifications in EPCOS NTC
222 * Thermistors Datasheets
223 */
224 static const struct ntc_compensation b57330v2103[] = {
225 { .temp_c = -40, .ohm = 190030 },
226 { .temp_c = -35, .ohm = 145360 },
227 { .temp_c = -30, .ohm = 112060 },
228 { .temp_c = -25, .ohm = 87041 },
229 { .temp_c = -20, .ohm = 68104 },
230 { .temp_c = -15, .ohm = 53665 },
231 { .temp_c = -10, .ohm = 42576 },
232 { .temp_c = -5, .ohm = 34001 },
233 { .temp_c = 0, .ohm = 27326 },
234 { .temp_c = 5, .ohm = 22096 },
235 { .temp_c = 10, .ohm = 17973 },
236 { .temp_c = 15, .ohm = 14703 },
237 { .temp_c = 20, .ohm = 12090 },
238 { .temp_c = 25, .ohm = 10000 },
239 { .temp_c = 30, .ohm = 8311 },
240 { .temp_c = 35, .ohm = 6941 },
241 { .temp_c = 40, .ohm = 5825 },
242 { .temp_c = 45, .ohm = 4911 },
243 { .temp_c = 50, .ohm = 4158 },
244 { .temp_c = 55, .ohm = 3536 },
245 { .temp_c = 60, .ohm = 3019 },
246 { .temp_c = 65, .ohm = 2588 },
247 { .temp_c = 70, .ohm = 2227 },
248 { .temp_c = 75, .ohm = 1924 },
249 { .temp_c = 80, .ohm = 1668 },
250 { .temp_c = 85, .ohm = 1451 },
251 { .temp_c = 90, .ohm = 1266 },
252 { .temp_c = 95, .ohm = 1108 },
253 { .temp_c = 100, .ohm = 973 },
254 { .temp_c = 105, .ohm = 857 },
255 { .temp_c = 110, .ohm = 757 },
256 { .temp_c = 115, .ohm = 671 },
257 { .temp_c = 120, .ohm = 596 },
258 { .temp_c = 125, .ohm = 531 },
259 };
260
261 static const struct ntc_compensation b57891s0103[] = {
262 { .temp_c = -55.0, .ohm = 878900 },
263 { .temp_c = -50.0, .ohm = 617590 },
264 { .temp_c = -45.0, .ohm = 439340 },
265 { .temp_c = -40.0, .ohm = 316180 },
266 { .temp_c = -35.0, .ohm = 230060 },
267 { .temp_c = -30.0, .ohm = 169150 },
268 { .temp_c = -25.0, .ohm = 125550 },
269 { .temp_c = -20.0, .ohm = 94143 },
270 { .temp_c = -15.0, .ohm = 71172 },
271 { .temp_c = -10.0, .ohm = 54308 },
272 { .temp_c = -5.0, .ohm = 41505 },
273 { .temp_c = 0.0, .ohm = 32014 },
274 { .temp_c = 5.0, .ohm = 25011 },
275 { .temp_c = 10.0, .ohm = 19691 },
276 { .temp_c = 15.0, .ohm = 15618 },
277 { .temp_c = 20.0, .ohm = 12474 },
278 { .temp_c = 25.0, .ohm = 10000 },
279 { .temp_c = 30.0, .ohm = 8080 },
280 { .temp_c = 35.0, .ohm = 6569 },
281 { .temp_c = 40.0, .ohm = 5372 },
282 { .temp_c = 45.0, .ohm = 4424 },
283 { .temp_c = 50.0, .ohm = 3661 },
284 { .temp_c = 55.0, .ohm = 3039 },
285 { .temp_c = 60.0, .ohm = 2536 },
286 { .temp_c = 65.0, .ohm = 2128 },
287 { .temp_c = 70.0, .ohm = 1794 },
288 { .temp_c = 75.0, .ohm = 1518 },
289 { .temp_c = 80.0, .ohm = 1290 },
290 { .temp_c = 85.0, .ohm = 1100 },
291 { .temp_c = 90.0, .ohm = 942 },
292 { .temp_c = 95.0, .ohm = 809 },
293 { .temp_c = 100.0, .ohm = 697 },
294 { .temp_c = 105.0, .ohm = 604 },
295 { .temp_c = 110.0, .ohm = 525 },
296 { .temp_c = 115.0, .ohm = 457 },
297 { .temp_c = 120.0, .ohm = 400 },
298 { .temp_c = 125.0, .ohm = 351 },
299 { .temp_c = 130.0, .ohm = 308 },
300 { .temp_c = 135.0, .ohm = 272 },
301 { .temp_c = 140.0, .ohm = 240 },
302 { .temp_c = 145.0, .ohm = 213 },
303 { .temp_c = 150.0, .ohm = 189 },
304 { .temp_c = 155.0, .ohm = 168 },
305 };
306
307 struct ntc_type {
308 const struct ntc_compensation *comp;
309 int n_comp;
310 };
311
312 #define NTC_TYPE(ntc, compensation) \
313 [(ntc)] = { .comp = (compensation), .n_comp = ARRAY_SIZE(compensation) }
314
315 static const struct ntc_type ntc_type[] = {
316 NTC_TYPE(TYPE_B57330V2103, b57330v2103),
317 NTC_TYPE(TYPE_B57891S0103, b57891s0103),
318 NTC_TYPE(TYPE_NCPXXWB473, ncpXXwb473),
319 NTC_TYPE(TYPE_NCPXXWF104, ncpXXwf104),
320 NTC_TYPE(TYPE_NCPXXWL333, ncpXXwl333),
321 NTC_TYPE(TYPE_NCPXXXH103, ncpXXxh103),
322 };
323
324 /*
325 * pullup_uV, pullup_ohm, pulldown_ohm, and connect are required.
326 *
327 * How to setup pullup_ohm, pulldown_ohm, and connect is
328 * described at Documentation/hwmon/ntc_thermistor.rst
329 *
330 * pullup/down_ohm: 0 for infinite / not-connected
331 *
332 * chan: iio_channel pointer to communicate with the ADC which the
333 * thermistor is using for conversion of the analog values.
334 */
335 struct ntc_data {
336 const struct ntc_compensation *comp;
337 int n_comp;
338 unsigned int pullup_uv;
339 unsigned int pullup_ohm;
340 unsigned int pulldown_ohm;
341 enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect;
342 struct iio_channel *chan;
343 };
344
ntc_adc_iio_read(struct ntc_data * data)345 static int ntc_adc_iio_read(struct ntc_data *data)
346 {
347 struct iio_channel *channel = data->chan;
348 int uv, ret;
349
350 ret = iio_read_channel_processed_scale(channel, &uv, 1000);
351 if (ret < 0) {
352 int raw;
353
354 /*
355 * This fallback uses a raw read and then
356 * assumes the ADC is 12 bits, scaling with
357 * a factor 1000 to get to microvolts.
358 */
359 ret = iio_read_channel_raw(channel, &raw);
360 if (ret < 0) {
361 pr_err("read channel() error: %d\n", ret);
362 return ret;
363 }
364 ret = iio_convert_raw_to_processed(channel, raw, &uv, 1000);
365 if (ret < 0) {
366 /* Assume 12 bit ADC with vref at pullup_uv */
367 uv = (data->pullup_uv * (s64)raw) >> 12;
368 }
369 }
370
371 return uv;
372 }
373
div64_u64_safe(u64 dividend,u64 divisor)374 static inline u64 div64_u64_safe(u64 dividend, u64 divisor)
375 {
376 if (divisor == 0 && dividend == 0)
377 return 0;
378 if (divisor == 0)
379 return UINT_MAX;
380 return div64_u64(dividend, divisor);
381 }
382
get_ohm_of_thermistor(struct ntc_data * data,unsigned int uv)383 static int get_ohm_of_thermistor(struct ntc_data *data, unsigned int uv)
384 {
385 u32 puv = data->pullup_uv;
386 u64 n, puo, pdo;
387 puo = data->pullup_ohm;
388 pdo = data->pulldown_ohm;
389
390 if (uv == 0)
391 return (data->connect == NTC_CONNECTED_POSITIVE) ?
392 INT_MAX : 0;
393 if (uv >= puv)
394 return (data->connect == NTC_CONNECTED_POSITIVE) ?
395 0 : INT_MAX;
396
397 if (data->connect == NTC_CONNECTED_POSITIVE && puo == 0)
398 n = div_u64(pdo * (puv - uv), uv);
399 else if (data->connect == NTC_CONNECTED_GROUND && pdo == 0)
400 n = div_u64(puo * uv, puv - uv);
401 else if (data->connect == NTC_CONNECTED_POSITIVE)
402 n = div64_u64_safe(pdo * puo * (puv - uv),
403 puo * uv - pdo * (puv - uv));
404 else
405 n = div64_u64_safe(pdo * puo * uv, pdo * (puv - uv) - puo * uv);
406
407 if (n > INT_MAX)
408 n = INT_MAX;
409 return n;
410 }
411
lookup_comp(struct ntc_data * data,unsigned int ohm,int * i_low,int * i_high)412 static void lookup_comp(struct ntc_data *data, unsigned int ohm,
413 int *i_low, int *i_high)
414 {
415 int start, end, mid;
416
417 /*
418 * Handle special cases: Resistance is higher than or equal to
419 * resistance in first table entry, or resistance is lower or equal
420 * to resistance in last table entry.
421 * In these cases, return i_low == i_high, either pointing to the
422 * beginning or to the end of the table depending on the condition.
423 */
424 if (ohm >= data->comp[0].ohm) {
425 *i_low = 0;
426 *i_high = 0;
427 return;
428 }
429 if (ohm <= data->comp[data->n_comp - 1].ohm) {
430 *i_low = data->n_comp - 1;
431 *i_high = data->n_comp - 1;
432 return;
433 }
434
435 /* Do a binary search on compensation table */
436 start = 0;
437 end = data->n_comp;
438 while (start < end) {
439 mid = start + (end - start) / 2;
440 /*
441 * start <= mid < end
442 * data->comp[start].ohm > ohm >= data->comp[end].ohm
443 *
444 * We could check for "ohm == data->comp[mid].ohm" here, but
445 * that is a quite unlikely condition, and we would have to
446 * check again after updating start. Check it at the end instead
447 * for simplicity.
448 */
449 if (ohm >= data->comp[mid].ohm) {
450 end = mid;
451 } else {
452 start = mid + 1;
453 /*
454 * ohm >= data->comp[start].ohm might be true here,
455 * since we set start to mid + 1. In that case, we are
456 * done. We could keep going, but the condition is quite
457 * likely to occur, so it is worth checking for it.
458 */
459 if (ohm >= data->comp[start].ohm)
460 end = start;
461 }
462 /*
463 * start <= end
464 * data->comp[start].ohm >= ohm >= data->comp[end].ohm
465 */
466 }
467 /*
468 * start == end
469 * ohm >= data->comp[end].ohm
470 */
471 *i_low = end;
472 if (ohm == data->comp[end].ohm)
473 *i_high = end;
474 else
475 *i_high = end - 1;
476 }
477
get_temp_mc(struct ntc_data * data,unsigned int ohm)478 static int get_temp_mc(struct ntc_data *data, unsigned int ohm)
479 {
480 int low, high;
481 int temp;
482
483 lookup_comp(data, ohm, &low, &high);
484 /*
485 * First multiplying the table temperatures with 1000 to get to
486 * millicentigrades (which is what we want) and then interpolating
487 * will give the best precision.
488 */
489 temp = fixp_linear_interpolate(data->comp[low].ohm,
490 data->comp[low].temp_c * 1000,
491 data->comp[high].ohm,
492 data->comp[high].temp_c * 1000,
493 ohm);
494 return temp;
495 }
496
ntc_thermistor_get_ohm(struct ntc_data * data)497 static int ntc_thermistor_get_ohm(struct ntc_data *data)
498 {
499 int read_uv;
500
501 read_uv = ntc_adc_iio_read(data);
502 if (read_uv < 0)
503 return read_uv;
504 return get_ohm_of_thermistor(data, read_uv);
505 }
506
ntc_read(struct device * dev,enum hwmon_sensor_types type,u32 attr,int channel,long * val)507 static int ntc_read(struct device *dev, enum hwmon_sensor_types type,
508 u32 attr, int channel, long *val)
509 {
510 struct ntc_data *data = dev_get_drvdata(dev);
511 int ohm;
512
513 switch (type) {
514 case hwmon_temp:
515 switch (attr) {
516 case hwmon_temp_input:
517 ohm = ntc_thermistor_get_ohm(data);
518 if (ohm < 0)
519 return ohm;
520 *val = get_temp_mc(data, ohm);
521 return 0;
522 case hwmon_temp_type:
523 *val = 4;
524 return 0;
525 default:
526 break;
527 }
528 break;
529 default:
530 break;
531 }
532 return -EINVAL;
533 }
534
ntc_is_visible(const void * data,enum hwmon_sensor_types type,u32 attr,int channel)535 static umode_t ntc_is_visible(const void *data, enum hwmon_sensor_types type,
536 u32 attr, int channel)
537 {
538 if (type == hwmon_temp) {
539 switch (attr) {
540 case hwmon_temp_input:
541 case hwmon_temp_type:
542 return 0444;
543 default:
544 break;
545 }
546 }
547 return 0;
548 }
549
550 static const struct hwmon_channel_info * const ntc_info[] = {
551 HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
552 HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_TYPE),
553 NULL
554 };
555
556 static const struct hwmon_ops ntc_hwmon_ops = {
557 .is_visible = ntc_is_visible,
558 .read = ntc_read,
559 };
560
561 static const struct hwmon_chip_info ntc_chip_info = {
562 .ops = &ntc_hwmon_ops,
563 .info = ntc_info,
564 };
565
ntc_thermistor_parse_props(struct device * dev,struct ntc_data * data)566 static int ntc_thermistor_parse_props(struct device *dev,
567 struct ntc_data *data)
568 {
569 struct iio_channel *chan;
570 enum iio_chan_type type;
571 int ret;
572
573 chan = devm_iio_channel_get(dev, NULL);
574 if (IS_ERR(chan))
575 return PTR_ERR(chan);
576
577 ret = iio_get_channel_type(chan, &type);
578 if (ret < 0)
579 return ret;
580
581 if (type != IIO_VOLTAGE)
582 return -EINVAL;
583
584 ret = device_property_read_u32(dev, "pullup-uv", &data->pullup_uv);
585 if (ret)
586 return dev_err_probe(dev, ret, "pullup-uv not specified\n");
587
588 ret = device_property_read_u32(dev, "pullup-ohm", &data->pullup_ohm);
589 if (ret)
590 return dev_err_probe(dev, ret, "pullup-ohm not specified\n");
591
592 ret = device_property_read_u32(dev, "pulldown-ohm", &data->pulldown_ohm);
593 if (ret)
594 return dev_err_probe(dev, ret, "pulldown-ohm not specified\n");
595
596 if (device_property_read_bool(dev, "connected-positive"))
597 data->connect = NTC_CONNECTED_POSITIVE;
598 else /* status change should be possible if not always on. */
599 data->connect = NTC_CONNECTED_GROUND;
600
601 data->chan = chan;
602
603 return 0;
604 }
605
ntc_thermistor_probe(struct platform_device * pdev)606 static int ntc_thermistor_probe(struct platform_device *pdev)
607 {
608 struct device *dev = &pdev->dev;
609 const struct platform_device_id *pdev_id;
610 struct device *hwmon_dev;
611 struct ntc_data *data;
612 int ret;
613
614 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
615 if (!data)
616 return -ENOMEM;
617
618 ret = ntc_thermistor_parse_props(dev, data);
619 if (ret)
620 return ret;
621
622 if (data->pullup_uv == 0 ||
623 (data->pullup_ohm == 0 && data->connect ==
624 NTC_CONNECTED_GROUND) ||
625 (data->pulldown_ohm == 0 && data->connect ==
626 NTC_CONNECTED_POSITIVE) ||
627 (data->connect != NTC_CONNECTED_POSITIVE &&
628 data->connect != NTC_CONNECTED_GROUND)) {
629 dev_err(dev, "Required data to use NTC driver not supplied.\n");
630 return -EINVAL;
631 }
632
633 pdev_id = device_get_match_data(dev);
634
635 if (pdev_id->driver_data >= ARRAY_SIZE(ntc_type)) {
636 dev_err(dev, "Unknown device type: %lu(%s)\n",
637 pdev_id->driver_data, pdev_id->name);
638 return -EINVAL;
639 }
640
641 data->comp = ntc_type[pdev_id->driver_data].comp;
642 data->n_comp = ntc_type[pdev_id->driver_data].n_comp;
643
644 hwmon_dev = devm_hwmon_device_register_with_info(dev, pdev_id->name,
645 data, &ntc_chip_info,
646 NULL);
647 if (IS_ERR(hwmon_dev)) {
648 dev_err(dev, "unable to register as hwmon device.\n");
649 return PTR_ERR(hwmon_dev);
650 }
651
652 dev_info(dev, "Thermistor type: %s successfully probed.\n",
653 pdev_id->name);
654
655 return 0;
656 }
657
658 static const struct of_device_id ntc_match[] = {
659 { .compatible = "epcos,b57330v2103",
660 .data = &ntc_thermistor_id[NTC_B57330V2103]},
661 { .compatible = "epcos,b57891s0103",
662 .data = &ntc_thermistor_id[NTC_B57891S0103] },
663 { .compatible = "murata,ncp03wb473",
664 .data = &ntc_thermistor_id[NTC_NCP03WB473] },
665 { .compatible = "murata,ncp03wf104",
666 .data = &ntc_thermistor_id[NTC_NCP03WF104] },
667 { .compatible = "murata,ncp15wb473",
668 .data = &ntc_thermistor_id[NTC_NCP15WB473] },
669 { .compatible = "murata,ncp15wl333",
670 .data = &ntc_thermistor_id[NTC_NCP15WL333] },
671 { .compatible = "murata,ncp15xh103",
672 .data = &ntc_thermistor_id[NTC_NCP15XH103] },
673 { .compatible = "murata,ncp18wb473",
674 .data = &ntc_thermistor_id[NTC_NCP18WB473] },
675 { .compatible = "murata,ncp21wb473",
676 .data = &ntc_thermistor_id[NTC_NCP21WB473] },
677 { .compatible = "samsung,1404-001221",
678 .data = &ntc_thermistor_id[NTC_SSG1404001221] },
679
680 /* Usage of vendor name "ntc" is deprecated */
681 { .compatible = "ntc,ncp03wb473",
682 .data = &ntc_thermistor_id[NTC_NCP03WB473] },
683 { .compatible = "ntc,ncp15wb473",
684 .data = &ntc_thermistor_id[NTC_NCP15WB473] },
685 { .compatible = "ntc,ncp15wl333",
686 .data = &ntc_thermistor_id[NTC_NCP15WL333] },
687 { .compatible = "ntc,ncp18wb473",
688 .data = &ntc_thermistor_id[NTC_NCP18WB473] },
689 { .compatible = "ntc,ncp21wb473",
690 .data = &ntc_thermistor_id[NTC_NCP21WB473] },
691 { },
692 };
693 MODULE_DEVICE_TABLE(of, ntc_match);
694
695 static struct platform_driver ntc_thermistor_driver = {
696 .driver = {
697 .name = "ntc-thermistor",
698 .of_match_table = ntc_match,
699 },
700 .probe = ntc_thermistor_probe,
701 .id_table = ntc_thermistor_id,
702 };
703
704 module_platform_driver(ntc_thermistor_driver);
705
706 MODULE_DESCRIPTION("NTC Thermistor Driver");
707 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
708 MODULE_LICENSE("GPL");
709 MODULE_ALIAS("platform:ntc-thermistor");
710