1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3
4 Broadcom B43 wireless driver
5 Common PHY routines
6
7 Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
8 Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it>
9 Copyright (c) 2005-2008 Michael Buesch <m@bues.ch>
10 Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org>
11 Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch>
12
13
14 */
15
16 #include "phy_common.h"
17 #include "phy_g.h"
18 #include "phy_a.h"
19 #include "phy_n.h"
20 #include "phy_lp.h"
21 #include "phy_ht.h"
22 #include "phy_lcn.h"
23 #include "phy_ac.h"
24 #include "b43.h"
25 #include "main.h"
26
27
b43_phy_allocate(struct b43_wldev * dev)28 int b43_phy_allocate(struct b43_wldev *dev)
29 {
30 struct b43_phy *phy = &(dev->phy);
31 int err;
32
33 phy->ops = NULL;
34
35 switch (phy->type) {
36 case B43_PHYTYPE_G:
37 #ifdef CONFIG_B43_PHY_G
38 phy->ops = &b43_phyops_g;
39 #endif
40 break;
41 case B43_PHYTYPE_N:
42 #ifdef CONFIG_B43_PHY_N
43 phy->ops = &b43_phyops_n;
44 #endif
45 break;
46 case B43_PHYTYPE_LP:
47 #ifdef CONFIG_B43_PHY_LP
48 phy->ops = &b43_phyops_lp;
49 #endif
50 break;
51 case B43_PHYTYPE_HT:
52 #ifdef CONFIG_B43_PHY_HT
53 phy->ops = &b43_phyops_ht;
54 #endif
55 break;
56 case B43_PHYTYPE_LCN:
57 #ifdef CONFIG_B43_PHY_LCN
58 phy->ops = &b43_phyops_lcn;
59 #endif
60 break;
61 case B43_PHYTYPE_AC:
62 #ifdef CONFIG_B43_PHY_AC
63 phy->ops = &b43_phyops_ac;
64 #endif
65 break;
66 }
67 if (B43_WARN_ON(!phy->ops))
68 return -ENODEV;
69
70 err = phy->ops->allocate(dev);
71 if (err)
72 phy->ops = NULL;
73
74 return err;
75 }
76
b43_phy_free(struct b43_wldev * dev)77 void b43_phy_free(struct b43_wldev *dev)
78 {
79 dev->phy.ops->free(dev);
80 dev->phy.ops = NULL;
81 }
82
b43_phy_init(struct b43_wldev * dev)83 int b43_phy_init(struct b43_wldev *dev)
84 {
85 struct b43_phy *phy = &dev->phy;
86 const struct b43_phy_operations *ops = phy->ops;
87 int err;
88
89 /* During PHY init we need to use some channel. On the first init this
90 * function is called *before* b43_op_config, so our pointer is NULL.
91 */
92 if (!phy->chandef) {
93 phy->chandef = &dev->wl->hw->conf.chandef;
94 phy->channel = phy->chandef->chan->hw_value;
95 }
96
97 phy->ops->switch_analog(dev, true);
98 b43_software_rfkill(dev, false);
99
100 err = ops->init(dev);
101 if (err) {
102 b43err(dev->wl, "PHY init failed\n");
103 goto err_block_rf;
104 }
105 phy->do_full_init = false;
106
107 err = b43_switch_channel(dev, phy->channel);
108 if (err) {
109 b43err(dev->wl, "PHY init: Channel switch to default failed\n");
110 goto err_phy_exit;
111 }
112
113 return 0;
114
115 err_phy_exit:
116 phy->do_full_init = true;
117 if (ops->exit)
118 ops->exit(dev);
119 err_block_rf:
120 b43_software_rfkill(dev, true);
121
122 return err;
123 }
124
b43_phy_exit(struct b43_wldev * dev)125 void b43_phy_exit(struct b43_wldev *dev)
126 {
127 const struct b43_phy_operations *ops = dev->phy.ops;
128
129 b43_software_rfkill(dev, true);
130 dev->phy.do_full_init = true;
131 if (ops->exit)
132 ops->exit(dev);
133 }
134
b43_has_hardware_pctl(struct b43_wldev * dev)135 bool b43_has_hardware_pctl(struct b43_wldev *dev)
136 {
137 if (!dev->phy.hardware_power_control)
138 return false;
139 if (!dev->phy.ops->supports_hwpctl)
140 return false;
141 return dev->phy.ops->supports_hwpctl(dev);
142 }
143
b43_radio_lock(struct b43_wldev * dev)144 void b43_radio_lock(struct b43_wldev *dev)
145 {
146 u32 macctl;
147
148 #if B43_DEBUG
149 B43_WARN_ON(dev->phy.radio_locked);
150 dev->phy.radio_locked = true;
151 #endif
152
153 macctl = b43_read32(dev, B43_MMIO_MACCTL);
154 macctl |= B43_MACCTL_RADIOLOCK;
155 b43_write32(dev, B43_MMIO_MACCTL, macctl);
156 /* Commit the write and wait for the firmware
157 * to finish any radio register access. */
158 b43_read32(dev, B43_MMIO_MACCTL);
159 udelay(10);
160 }
161
b43_radio_unlock(struct b43_wldev * dev)162 void b43_radio_unlock(struct b43_wldev *dev)
163 {
164 u32 macctl;
165
166 #if B43_DEBUG
167 B43_WARN_ON(!dev->phy.radio_locked);
168 dev->phy.radio_locked = false;
169 #endif
170
171 /* Commit any write */
172 b43_read16(dev, B43_MMIO_PHY_VER);
173 /* unlock */
174 macctl = b43_read32(dev, B43_MMIO_MACCTL);
175 macctl &= ~B43_MACCTL_RADIOLOCK;
176 b43_write32(dev, B43_MMIO_MACCTL, macctl);
177 }
178
b43_phy_lock(struct b43_wldev * dev)179 void b43_phy_lock(struct b43_wldev *dev)
180 {
181 #if B43_DEBUG
182 B43_WARN_ON(dev->phy.phy_locked);
183 dev->phy.phy_locked = true;
184 #endif
185 B43_WARN_ON(dev->dev->core_rev < 3);
186
187 if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
188 b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
189 }
190
b43_phy_unlock(struct b43_wldev * dev)191 void b43_phy_unlock(struct b43_wldev *dev)
192 {
193 #if B43_DEBUG
194 B43_WARN_ON(!dev->phy.phy_locked);
195 dev->phy.phy_locked = false;
196 #endif
197 B43_WARN_ON(dev->dev->core_rev < 3);
198
199 if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
200 b43_power_saving_ctl_bits(dev, 0);
201 }
202
assert_mac_suspended(struct b43_wldev * dev)203 static inline void assert_mac_suspended(struct b43_wldev *dev)
204 {
205 if (!B43_DEBUG)
206 return;
207 if ((b43_status(dev) >= B43_STAT_INITIALIZED) &&
208 (dev->mac_suspended <= 0)) {
209 b43dbg(dev->wl, "PHY/RADIO register access with "
210 "enabled MAC.\n");
211 dump_stack();
212 }
213 }
214
b43_radio_read(struct b43_wldev * dev,u16 reg)215 u16 b43_radio_read(struct b43_wldev *dev, u16 reg)
216 {
217 assert_mac_suspended(dev);
218 dev->phy.writes_counter = 0;
219 return dev->phy.ops->radio_read(dev, reg);
220 }
221
b43_radio_write(struct b43_wldev * dev,u16 reg,u16 value)222 void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
223 {
224 assert_mac_suspended(dev);
225 if (b43_bus_host_is_pci(dev->dev) &&
226 ++dev->phy.writes_counter > B43_MAX_WRITES_IN_ROW) {
227 b43_read32(dev, B43_MMIO_MACCTL);
228 dev->phy.writes_counter = 1;
229 }
230 dev->phy.ops->radio_write(dev, reg, value);
231 }
232
b43_radio_mask(struct b43_wldev * dev,u16 offset,u16 mask)233 void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask)
234 {
235 b43_radio_write16(dev, offset,
236 b43_radio_read16(dev, offset) & mask);
237 }
238
b43_radio_set(struct b43_wldev * dev,u16 offset,u16 set)239 void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set)
240 {
241 b43_radio_write16(dev, offset,
242 b43_radio_read16(dev, offset) | set);
243 }
244
b43_radio_maskset(struct b43_wldev * dev,u16 offset,u16 mask,u16 set)245 void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
246 {
247 b43_radio_write16(dev, offset,
248 (b43_radio_read16(dev, offset) & mask) | set);
249 }
250
b43_radio_wait_value(struct b43_wldev * dev,u16 offset,u16 mask,u16 value,int delay,int timeout)251 bool b43_radio_wait_value(struct b43_wldev *dev, u16 offset, u16 mask,
252 u16 value, int delay, int timeout)
253 {
254 u16 val;
255 int i;
256
257 for (i = 0; i < timeout; i += delay) {
258 val = b43_radio_read(dev, offset);
259 if ((val & mask) == value)
260 return true;
261 udelay(delay);
262 }
263 return false;
264 }
265
b43_phy_read(struct b43_wldev * dev,u16 reg)266 u16 b43_phy_read(struct b43_wldev *dev, u16 reg)
267 {
268 assert_mac_suspended(dev);
269 dev->phy.writes_counter = 0;
270
271 if (dev->phy.ops->phy_read)
272 return dev->phy.ops->phy_read(dev, reg);
273
274 b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg);
275 return b43_read16(dev, B43_MMIO_PHY_DATA);
276 }
277
b43_phy_write(struct b43_wldev * dev,u16 reg,u16 value)278 void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value)
279 {
280 assert_mac_suspended(dev);
281 if (b43_bus_host_is_pci(dev->dev) &&
282 ++dev->phy.writes_counter > B43_MAX_WRITES_IN_ROW) {
283 b43_read16(dev, B43_MMIO_PHY_VER);
284 dev->phy.writes_counter = 1;
285 }
286
287 if (dev->phy.ops->phy_write)
288 return dev->phy.ops->phy_write(dev, reg, value);
289
290 b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg);
291 b43_write16(dev, B43_MMIO_PHY_DATA, value);
292 }
293
b43_phy_copy(struct b43_wldev * dev,u16 destreg,u16 srcreg)294 void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg)
295 {
296 b43_phy_write(dev, destreg, b43_phy_read(dev, srcreg));
297 }
298
b43_phy_mask(struct b43_wldev * dev,u16 offset,u16 mask)299 void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
300 {
301 if (dev->phy.ops->phy_maskset) {
302 assert_mac_suspended(dev);
303 dev->phy.ops->phy_maskset(dev, offset, mask, 0);
304 } else {
305 b43_phy_write(dev, offset,
306 b43_phy_read(dev, offset) & mask);
307 }
308 }
309
b43_phy_set(struct b43_wldev * dev,u16 offset,u16 set)310 void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set)
311 {
312 if (dev->phy.ops->phy_maskset) {
313 assert_mac_suspended(dev);
314 dev->phy.ops->phy_maskset(dev, offset, 0xFFFF, set);
315 } else {
316 b43_phy_write(dev, offset,
317 b43_phy_read(dev, offset) | set);
318 }
319 }
320
b43_phy_maskset(struct b43_wldev * dev,u16 offset,u16 mask,u16 set)321 void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
322 {
323 if (dev->phy.ops->phy_maskset) {
324 assert_mac_suspended(dev);
325 dev->phy.ops->phy_maskset(dev, offset, mask, set);
326 } else {
327 b43_phy_write(dev, offset,
328 (b43_phy_read(dev, offset) & mask) | set);
329 }
330 }
331
b43_phy_put_into_reset(struct b43_wldev * dev)332 void b43_phy_put_into_reset(struct b43_wldev *dev)
333 {
334 u32 tmp;
335
336 switch (dev->dev->bus_type) {
337 #ifdef CONFIG_B43_BCMA
338 case B43_BUS_BCMA:
339 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
340 tmp &= ~B43_BCMA_IOCTL_GMODE;
341 tmp |= B43_BCMA_IOCTL_PHY_RESET;
342 tmp |= BCMA_IOCTL_FGC;
343 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
344 udelay(1);
345
346 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
347 tmp &= ~BCMA_IOCTL_FGC;
348 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
349 udelay(1);
350 break;
351 #endif
352 #ifdef CONFIG_B43_SSB
353 case B43_BUS_SSB:
354 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
355 tmp &= ~B43_TMSLOW_GMODE;
356 tmp |= B43_TMSLOW_PHYRESET;
357 tmp |= SSB_TMSLOW_FGC;
358 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
359 usleep_range(1000, 2000);
360
361 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
362 tmp &= ~SSB_TMSLOW_FGC;
363 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
364 usleep_range(1000, 2000);
365
366 break;
367 #endif
368 }
369 }
370
b43_phy_take_out_of_reset(struct b43_wldev * dev)371 void b43_phy_take_out_of_reset(struct b43_wldev *dev)
372 {
373 u32 tmp;
374
375 switch (dev->dev->bus_type) {
376 #ifdef CONFIG_B43_BCMA
377 case B43_BUS_BCMA:
378 /* Unset reset bit (with forcing clock) */
379 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
380 tmp &= ~B43_BCMA_IOCTL_PHY_RESET;
381 tmp &= ~B43_BCMA_IOCTL_PHY_CLKEN;
382 tmp |= BCMA_IOCTL_FGC;
383 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
384 udelay(1);
385
386 /* Do not force clock anymore */
387 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
388 tmp &= ~BCMA_IOCTL_FGC;
389 tmp |= B43_BCMA_IOCTL_PHY_CLKEN;
390 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
391 udelay(1);
392 break;
393 #endif
394 #ifdef CONFIG_B43_SSB
395 case B43_BUS_SSB:
396 /* Unset reset bit (with forcing clock) */
397 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
398 tmp &= ~B43_TMSLOW_PHYRESET;
399 tmp &= ~B43_TMSLOW_PHYCLKEN;
400 tmp |= SSB_TMSLOW_FGC;
401 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
402 ssb_read32(dev->dev->sdev, SSB_TMSLOW); /* flush */
403 usleep_range(1000, 2000);
404
405 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
406 tmp &= ~SSB_TMSLOW_FGC;
407 tmp |= B43_TMSLOW_PHYCLKEN;
408 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
409 ssb_read32(dev->dev->sdev, SSB_TMSLOW); /* flush */
410 usleep_range(1000, 2000);
411 break;
412 #endif
413 }
414 }
415
b43_switch_channel(struct b43_wldev * dev,unsigned int new_channel)416 int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel)
417 {
418 struct b43_phy *phy = &(dev->phy);
419 u16 channelcookie, savedcookie;
420 int err;
421
422 /* First we set the channel radio code to prevent the
423 * firmware from sending ghost packets.
424 */
425 channelcookie = new_channel;
426 if (b43_current_band(dev->wl) == NL80211_BAND_5GHZ)
427 channelcookie |= B43_SHM_SH_CHAN_5GHZ;
428 /* FIXME: set 40Mhz flag if required */
429 if (0)
430 channelcookie |= B43_SHM_SH_CHAN_40MHZ;
431 savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN);
432 b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie);
433
434 /* Now try to switch the PHY hardware channel. */
435 err = phy->ops->switch_channel(dev, new_channel);
436 if (err)
437 goto err_restore_cookie;
438
439 /* Wait for the radio to tune to the channel and stabilize. */
440 msleep(8);
441
442 return 0;
443
444 err_restore_cookie:
445 b43_shm_write16(dev, B43_SHM_SHARED,
446 B43_SHM_SH_CHAN, savedcookie);
447
448 return err;
449 }
450
b43_software_rfkill(struct b43_wldev * dev,bool blocked)451 void b43_software_rfkill(struct b43_wldev *dev, bool blocked)
452 {
453 struct b43_phy *phy = &dev->phy;
454
455 b43_mac_suspend(dev);
456 phy->ops->software_rfkill(dev, blocked);
457 phy->radio_on = !blocked;
458 b43_mac_enable(dev);
459 }
460
461 /*
462 * b43_phy_txpower_adjust_work - TX power workqueue.
463 *
464 * Workqueue for updating the TX power parameters in hardware.
465 */
b43_phy_txpower_adjust_work(struct work_struct * work)466 void b43_phy_txpower_adjust_work(struct work_struct *work)
467 {
468 struct b43_wl *wl = container_of(work, struct b43_wl,
469 txpower_adjust_work);
470 struct b43_wldev *dev;
471
472 mutex_lock(&wl->mutex);
473 dev = wl->current_dev;
474
475 if (likely(dev && (b43_status(dev) >= B43_STAT_STARTED)))
476 dev->phy.ops->adjust_txpower(dev);
477
478 mutex_unlock(&wl->mutex);
479 }
480
b43_phy_txpower_check(struct b43_wldev * dev,unsigned int flags)481 void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags)
482 {
483 struct b43_phy *phy = &dev->phy;
484 unsigned long now = jiffies;
485 enum b43_txpwr_result result;
486
487 if (!(flags & B43_TXPWR_IGNORE_TIME)) {
488 /* Check if it's time for a TXpower check. */
489 if (time_before(now, phy->next_txpwr_check_time))
490 return; /* Not yet */
491 }
492 /* The next check will be needed in two seconds, or later. */
493 phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2));
494
495 if ((dev->dev->board_vendor == SSB_BOARDVENDOR_BCM) &&
496 (dev->dev->board_type == SSB_BOARD_BU4306))
497 return; /* No software txpower adjustment needed */
498
499 result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI));
500 if (result == B43_TXPWR_RES_DONE)
501 return; /* We are done. */
502 B43_WARN_ON(result != B43_TXPWR_RES_NEED_ADJUST);
503 B43_WARN_ON(phy->ops->adjust_txpower == NULL);
504
505 /* We must adjust the transmission power in hardware.
506 * Schedule b43_phy_txpower_adjust_work(). */
507 ieee80211_queue_work(dev->wl->hw, &dev->wl->txpower_adjust_work);
508 }
509
b43_phy_shm_tssi_read(struct b43_wldev * dev,u16 shm_offset)510 int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset)
511 {
512 const bool is_ofdm = (shm_offset != B43_SHM_SH_TSSI_CCK);
513 unsigned int a, b, c, d;
514 unsigned int average;
515 u32 tmp;
516
517 tmp = b43_shm_read32(dev, B43_SHM_SHARED, shm_offset);
518 a = tmp & 0xFF;
519 b = (tmp >> 8) & 0xFF;
520 c = (tmp >> 16) & 0xFF;
521 d = (tmp >> 24) & 0xFF;
522 if (a == 0 || a == B43_TSSI_MAX ||
523 b == 0 || b == B43_TSSI_MAX ||
524 c == 0 || c == B43_TSSI_MAX ||
525 d == 0 || d == B43_TSSI_MAX)
526 return -ENOENT;
527 /* The values are OK. Clear them. */
528 tmp = B43_TSSI_MAX | (B43_TSSI_MAX << 8) |
529 (B43_TSSI_MAX << 16) | (B43_TSSI_MAX << 24);
530 b43_shm_write32(dev, B43_SHM_SHARED, shm_offset, tmp);
531
532 if (is_ofdm) {
533 a = (a + 32) & 0x3F;
534 b = (b + 32) & 0x3F;
535 c = (c + 32) & 0x3F;
536 d = (d + 32) & 0x3F;
537 }
538
539 /* Get the average of the values with 0.5 added to each value. */
540 average = (a + b + c + d + 2) / 4;
541 if (is_ofdm) {
542 /* Adjust for CCK-boost */
543 if (b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTF1)
544 & B43_HF_CCKBOOST)
545 average = (average >= 13) ? (average - 13) : 0;
546 }
547
548 return average;
549 }
550
b43_phyop_switch_analog_generic(struct b43_wldev * dev,bool on)551 void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
552 {
553 b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
554 }
555
556
b43_is_40mhz(struct b43_wldev * dev)557 bool b43_is_40mhz(struct b43_wldev *dev)
558 {
559 return dev->phy.chandef->width == NL80211_CHAN_WIDTH_40;
560 }
561
562 /* https://bcm-v4.sipsolutions.net/802.11/PHY/N/BmacPhyClkFgc */
b43_phy_force_clock(struct b43_wldev * dev,bool force)563 void b43_phy_force_clock(struct b43_wldev *dev, bool force)
564 {
565 u32 tmp;
566
567 WARN_ON(dev->phy.type != B43_PHYTYPE_N &&
568 dev->phy.type != B43_PHYTYPE_HT &&
569 dev->phy.type != B43_PHYTYPE_AC);
570
571 switch (dev->dev->bus_type) {
572 #ifdef CONFIG_B43_BCMA
573 case B43_BUS_BCMA:
574 tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
575 if (force)
576 tmp |= BCMA_IOCTL_FGC;
577 else
578 tmp &= ~BCMA_IOCTL_FGC;
579 bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
580 break;
581 #endif
582 #ifdef CONFIG_B43_SSB
583 case B43_BUS_SSB:
584 tmp = ssb_read32(dev->dev->sdev, SSB_TMSLOW);
585 if (force)
586 tmp |= SSB_TMSLOW_FGC;
587 else
588 tmp &= ~SSB_TMSLOW_FGC;
589 ssb_write32(dev->dev->sdev, SSB_TMSLOW, tmp);
590 break;
591 #endif
592 }
593 }
594