1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * AT and PS/2 keyboard driver
4 *
5 * Copyright (c) 1999-2002 Vojtech Pavlik
6 */
7
8
9 /*
10 * This driver can handle standard AT keyboards and PS/2 keyboards in
11 * Translated and Raw Set 2 and Set 3, as well as AT keyboards on dumb
12 * input-only controllers and AT keyboards connected over a one way RS232
13 * converter.
14 */
15
16 #include <linux/delay.h>
17 #include <linux/module.h>
18 #include <linux/slab.h>
19 #include <linux/interrupt.h>
20 #include <linux/init.h>
21 #include <linux/input.h>
22 #include <linux/input/vivaldi-fmap.h>
23 #include <linux/serio.h>
24 #include <linux/workqueue.h>
25 #include <linux/libps2.h>
26 #include <linux/mutex.h>
27 #include <linux/dmi.h>
28 #include <linux/property.h>
29
30 #define DRIVER_DESC "AT and PS/2 keyboard driver"
31
32 MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
33 MODULE_DESCRIPTION(DRIVER_DESC);
34 MODULE_LICENSE("GPL");
35
36 static int atkbd_set = 2;
37 module_param_named(set, atkbd_set, int, 0);
38 MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)");
39
40 #if defined(__i386__) || defined(__x86_64__) || defined(__hppa__)
41 static bool atkbd_reset;
42 #else
43 static bool atkbd_reset = true;
44 #endif
45 module_param_named(reset, atkbd_reset, bool, 0);
46 MODULE_PARM_DESC(reset, "Reset keyboard during initialization");
47
48 static bool atkbd_softrepeat;
49 module_param_named(softrepeat, atkbd_softrepeat, bool, 0);
50 MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat");
51
52 static bool atkbd_softraw = true;
53 module_param_named(softraw, atkbd_softraw, bool, 0);
54 MODULE_PARM_DESC(softraw, "Use software generated rawmode");
55
56 static bool atkbd_scroll;
57 module_param_named(scroll, atkbd_scroll, bool, 0);
58 MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards");
59
60 static bool atkbd_extra;
61 module_param_named(extra, atkbd_extra, bool, 0);
62 MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
63
64 static bool atkbd_terminal;
65 module_param_named(terminal, atkbd_terminal, bool, 0);
66 MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2");
67
68 #define SCANCODE(keymap) ((keymap >> 16) & 0xFFFF)
69 #define KEYCODE(keymap) (keymap & 0xFFFF)
70
71 /*
72 * Scancode to keycode tables. These are just the default setting, and
73 * are loadable via a userland utility.
74 */
75
76 #define ATKBD_KEYMAP_SIZE 512
77
78 static const unsigned short atkbd_set2_keycode[ATKBD_KEYMAP_SIZE] = {
79
80 #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
81
82 /* XXX: need a more general approach */
83
84 #include "hpps2atkbd.h" /* include the keyboard scancodes */
85
86 #else
87 0, 67, 65, 63, 61, 59, 60, 88, 0, 68, 66, 64, 62, 15, 41,117,
88 0, 56, 42, 93, 29, 16, 2, 0, 0, 0, 44, 31, 30, 17, 3, 0,
89 0, 46, 45, 32, 18, 5, 4, 95, 0, 57, 47, 33, 20, 19, 6,183,
90 0, 49, 48, 35, 34, 21, 7,184, 0, 0, 50, 36, 22, 8, 9,185,
91 0, 51, 37, 23, 24, 11, 10, 0, 0, 52, 53, 38, 39, 25, 12, 0,
92 0, 89, 40, 0, 26, 13, 0, 0, 58, 54, 28, 27, 0, 43, 0, 85,
93 0, 86, 91, 90, 92, 0, 14, 94, 0, 79,124, 75, 71,121, 0, 0,
94 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
95
96 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
97 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125,
98 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127,
99 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142,
100 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0,
101 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0,
102 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112,
103 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0,
104
105 0, 0, 0, 65, 99,
106 #endif
107 };
108
109 static const unsigned short atkbd_set3_keycode[ATKBD_KEYMAP_SIZE] = {
110
111 0, 0, 0, 0, 0, 0, 0, 59, 1,138,128,129,130, 15, 41, 60,
112 131, 29, 42, 86, 58, 16, 2, 61,133, 56, 44, 31, 30, 17, 3, 62,
113 134, 46, 45, 32, 18, 5, 4, 63,135, 57, 47, 33, 20, 19, 6, 64,
114 136, 49, 48, 35, 34, 21, 7, 65,137,100, 50, 36, 22, 8, 9, 66,
115 125, 51, 37, 23, 24, 11, 10, 67,126, 52, 53, 38, 39, 25, 12, 68,
116 113,114, 40, 43, 26, 13, 87, 99, 97, 54, 28, 27, 43, 43, 88, 70,
117 108,105,119,103,111,107, 14,110, 0, 79,106, 75, 71,109,102,104,
118 82, 83, 80, 76, 77, 72, 69, 98, 0, 96, 81, 0, 78, 73, 55,183,
119
120 184,185,186,187, 74, 94, 92, 93, 0, 0, 0,125,126,127,112, 0,
121 0,139,172,163,165,115,152,172,166,140,160,154,113,114,167,168,
122 148,149,147,140
123 };
124
125 static const unsigned short atkbd_unxlate_table[128] = {
126 0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
127 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27,
128 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42,
129 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88, 5, 6, 4, 12, 3,
130 11, 2, 10, 1, 9,119,126,108,117,125,123,107,115,116,121,105,
131 114,122,112,113,127, 96, 97,120, 7, 15, 23, 31, 39, 47, 55, 63,
132 71, 79, 86, 94, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111,
133 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110
134 };
135
136 #define ATKBD_CMD_SETLEDS 0x10ed
137 #define ATKBD_CMD_GSCANSET 0x11f0
138 #define ATKBD_CMD_SSCANSET 0x10f0
139 #define ATKBD_CMD_GETID 0x02f2
140 #define ATKBD_CMD_SETREP 0x10f3
141 #define ATKBD_CMD_ENABLE 0x00f4
142 #define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */
143 #define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */
144 #define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */
145 #define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */
146 #define ATKBD_CMD_RESET_BAT 0x02ff
147 #define ATKBD_CMD_RESEND 0x00fe
148 #define ATKBD_CMD_EX_ENABLE 0x10ea
149 #define ATKBD_CMD_EX_SETLEDS 0x20eb
150 #define ATKBD_CMD_OK_GETID 0x02e8
151
152 #define ATKBD_RET_ACK 0xfa
153 #define ATKBD_RET_NAK 0xfe
154 #define ATKBD_RET_BAT 0xaa
155 #define ATKBD_RET_EMUL0 0xe0
156 #define ATKBD_RET_EMUL1 0xe1
157 #define ATKBD_RET_RELEASE 0xf0
158 #define ATKBD_RET_HANJA 0xf1
159 #define ATKBD_RET_HANGEUL 0xf2
160 #define ATKBD_RET_ERR 0xff
161
162 #define ATKBD_KEY_UNKNOWN 0
163 #define ATKBD_KEY_NULL 255
164
165 #define ATKBD_SCR_1 0xfffe
166 #define ATKBD_SCR_2 0xfffd
167 #define ATKBD_SCR_4 0xfffc
168 #define ATKBD_SCR_8 0xfffb
169 #define ATKBD_SCR_CLICK 0xfffa
170 #define ATKBD_SCR_LEFT 0xfff9
171 #define ATKBD_SCR_RIGHT 0xfff8
172
173 #define ATKBD_SPECIAL ATKBD_SCR_RIGHT
174
175 #define ATKBD_LED_EVENT_BIT 0
176 #define ATKBD_REP_EVENT_BIT 1
177
178 #define ATKBD_XL_ERR 0x01
179 #define ATKBD_XL_BAT 0x02
180 #define ATKBD_XL_ACK 0x04
181 #define ATKBD_XL_NAK 0x08
182 #define ATKBD_XL_HANGEUL 0x10
183 #define ATKBD_XL_HANJA 0x20
184
185 static const struct {
186 unsigned short keycode;
187 unsigned char set2;
188 } atkbd_scroll_keys[] = {
189 { ATKBD_SCR_1, 0xc5 },
190 { ATKBD_SCR_2, 0x9d },
191 { ATKBD_SCR_4, 0xa4 },
192 { ATKBD_SCR_8, 0x9b },
193 { ATKBD_SCR_CLICK, 0xe0 },
194 { ATKBD_SCR_LEFT, 0xcb },
195 { ATKBD_SCR_RIGHT, 0xd2 },
196 };
197
198 /*
199 * The atkbd control structure
200 */
201
202 struct atkbd {
203
204 struct ps2dev ps2dev;
205 struct input_dev *dev;
206
207 /* Written only during init */
208 char name[64];
209 char phys[32];
210
211 unsigned short id;
212 unsigned short keycode[ATKBD_KEYMAP_SIZE];
213 DECLARE_BITMAP(force_release_mask, ATKBD_KEYMAP_SIZE);
214 unsigned char set;
215 bool translated;
216 bool extra;
217 bool write;
218 bool softrepeat;
219 bool softraw;
220 bool scroll;
221 bool enabled;
222
223 /* Accessed only from interrupt */
224 unsigned char emul;
225 bool resend;
226 bool release;
227 unsigned long xl_bit;
228 unsigned int last;
229 unsigned long time;
230 unsigned long err_count;
231
232 struct delayed_work event_work;
233 unsigned long event_jiffies;
234 unsigned long event_mask;
235
236 /* Serializes reconnect(), attr->set() and event work */
237 struct mutex mutex;
238
239 struct vivaldi_data vdata;
240 };
241
242 /*
243 * System-specific keymap fixup routine
244 */
245 static void (*atkbd_platform_fixup)(struct atkbd *, const void *data);
246 static void *atkbd_platform_fixup_data;
247 static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int);
248
249 /*
250 * Certain keyboards to not like ATKBD_CMD_RESET_DIS and stop responding
251 * to many commands until full reset (ATKBD_CMD_RESET_BAT) is performed.
252 */
253 static bool atkbd_skip_deactivate;
254
255 static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
256 ssize_t (*handler)(struct atkbd *, char *));
257 static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
258 ssize_t (*handler)(struct atkbd *, const char *, size_t));
259 #define ATKBD_DEFINE_ATTR(_name) \
260 static ssize_t atkbd_show_##_name(struct atkbd *, char *); \
261 static ssize_t atkbd_set_##_name(struct atkbd *, const char *, size_t); \
262 static ssize_t atkbd_do_show_##_name(struct device *d, \
263 struct device_attribute *attr, char *b) \
264 { \
265 return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \
266 } \
267 static ssize_t atkbd_do_set_##_name(struct device *d, \
268 struct device_attribute *attr, const char *b, size_t s) \
269 { \
270 return atkbd_attr_set_helper(d, b, s, atkbd_set_##_name); \
271 } \
272 static struct device_attribute atkbd_attr_##_name = \
273 __ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name);
274
275 ATKBD_DEFINE_ATTR(extra);
276 ATKBD_DEFINE_ATTR(force_release);
277 ATKBD_DEFINE_ATTR(scroll);
278 ATKBD_DEFINE_ATTR(set);
279 ATKBD_DEFINE_ATTR(softrepeat);
280 ATKBD_DEFINE_ATTR(softraw);
281
282 #define ATKBD_DEFINE_RO_ATTR(_name) \
283 static ssize_t atkbd_show_##_name(struct atkbd *, char *); \
284 static ssize_t atkbd_do_show_##_name(struct device *d, \
285 struct device_attribute *attr, char *b) \
286 { \
287 return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \
288 } \
289 static struct device_attribute atkbd_attr_##_name = \
290 __ATTR(_name, S_IRUGO, atkbd_do_show_##_name, NULL);
291
292 ATKBD_DEFINE_RO_ATTR(err_count);
293 ATKBD_DEFINE_RO_ATTR(function_row_physmap);
294
295 static struct attribute *atkbd_attributes[] = {
296 &atkbd_attr_extra.attr,
297 &atkbd_attr_force_release.attr,
298 &atkbd_attr_scroll.attr,
299 &atkbd_attr_set.attr,
300 &atkbd_attr_softrepeat.attr,
301 &atkbd_attr_softraw.attr,
302 &atkbd_attr_err_count.attr,
303 &atkbd_attr_function_row_physmap.attr,
304 NULL
305 };
306
atkbd_show_function_row_physmap(struct atkbd * atkbd,char * buf)307 static ssize_t atkbd_show_function_row_physmap(struct atkbd *atkbd, char *buf)
308 {
309 return vivaldi_function_row_physmap_show(&atkbd->vdata, buf);
310 }
311
atkbd_from_serio(struct serio * serio)312 static struct atkbd *atkbd_from_serio(struct serio *serio)
313 {
314 struct ps2dev *ps2dev = serio_get_drvdata(serio);
315
316 return container_of(ps2dev, struct atkbd, ps2dev);
317 }
318
atkbd_attr_is_visible(struct kobject * kobj,struct attribute * attr,int i)319 static umode_t atkbd_attr_is_visible(struct kobject *kobj,
320 struct attribute *attr, int i)
321 {
322 struct device *dev = kobj_to_dev(kobj);
323 struct serio *serio = to_serio_port(dev);
324 struct atkbd *atkbd = atkbd_from_serio(serio);
325
326 if (attr == &atkbd_attr_function_row_physmap.attr &&
327 !atkbd->vdata.num_function_row_keys)
328 return 0;
329
330 return attr->mode;
331 }
332
333 static const struct attribute_group atkbd_attribute_group = {
334 .attrs = atkbd_attributes,
335 .is_visible = atkbd_attr_is_visible,
336 };
337
338 __ATTRIBUTE_GROUPS(atkbd_attribute);
339
340 static const unsigned int xl_table[] = {
341 ATKBD_RET_BAT, ATKBD_RET_ERR, ATKBD_RET_ACK,
342 ATKBD_RET_NAK, ATKBD_RET_HANJA, ATKBD_RET_HANGEUL,
343 };
344
345 /*
346 * Checks if we should mangle the scancode to extract 'release' bit
347 * in translated mode.
348 */
atkbd_need_xlate(unsigned long xl_bit,unsigned char code)349 static bool atkbd_need_xlate(unsigned long xl_bit, unsigned char code)
350 {
351 int i;
352
353 if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1)
354 return false;
355
356 for (i = 0; i < ARRAY_SIZE(xl_table); i++)
357 if (code == xl_table[i])
358 return test_bit(i, &xl_bit);
359
360 return true;
361 }
362
363 /*
364 * Calculates new value of xl_bit so the driver can distinguish
365 * between make/break pair of scancodes for select keys and PS/2
366 * protocol responses.
367 */
atkbd_calculate_xl_bit(struct atkbd * atkbd,unsigned char code)368 static void atkbd_calculate_xl_bit(struct atkbd *atkbd, unsigned char code)
369 {
370 int i;
371
372 for (i = 0; i < ARRAY_SIZE(xl_table); i++) {
373 if (!((code ^ xl_table[i]) & 0x7f)) {
374 if (code & 0x80)
375 __clear_bit(i, &atkbd->xl_bit);
376 else
377 __set_bit(i, &atkbd->xl_bit);
378 break;
379 }
380 }
381 }
382
383 /*
384 * Encode the scancode, 0xe0 prefix, and high bit into a single integer,
385 * keeping kernel 2.4 compatibility for set 2
386 */
atkbd_compat_scancode(struct atkbd * atkbd,unsigned int code)387 static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code)
388 {
389 if (atkbd->set == 3) {
390 if (atkbd->emul == 1)
391 code |= 0x100;
392 } else {
393 code = (code & 0x7f) | ((code & 0x80) << 1);
394 if (atkbd->emul == 1)
395 code |= 0x80;
396 }
397
398 return code;
399 }
400
401 /*
402 * Tries to handle frame or parity error by requesting the keyboard controller
403 * to resend the last byte. This historically not done on x86 as controllers
404 * there typically do not implement this command.
405 */
atkbd_handle_frame_error(struct ps2dev * ps2dev,u8 data,unsigned int flags)406 static bool __maybe_unused atkbd_handle_frame_error(struct ps2dev *ps2dev,
407 u8 data, unsigned int flags)
408 {
409 struct atkbd *atkbd = container_of(ps2dev, struct atkbd, ps2dev);
410 struct serio *serio = ps2dev->serio;
411
412 if ((flags & (SERIO_FRAME | SERIO_PARITY)) &&
413 (~flags & SERIO_TIMEOUT) &&
414 !atkbd->resend && atkbd->write) {
415 dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags);
416 serio_write(serio, ATKBD_CMD_RESEND);
417 atkbd->resend = true;
418 return true;
419 }
420
421 if (!flags && data == ATKBD_RET_ACK)
422 atkbd->resend = false;
423
424 return false;
425 }
426
atkbd_pre_receive_byte(struct ps2dev * ps2dev,u8 data,unsigned int flags)427 static enum ps2_disposition atkbd_pre_receive_byte(struct ps2dev *ps2dev,
428 u8 data, unsigned int flags)
429 {
430 struct serio *serio = ps2dev->serio;
431
432 dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags);
433
434 #if !defined(__i386__) && !defined (__x86_64__)
435 if (atkbd_handle_frame_error(ps2dev, data, flags))
436 return PS2_IGNORE;
437 #endif
438
439 return PS2_PROCESS;
440 }
441
atkbd_receive_byte(struct ps2dev * ps2dev,u8 data)442 static void atkbd_receive_byte(struct ps2dev *ps2dev, u8 data)
443 {
444 struct serio *serio = ps2dev->serio;
445 struct atkbd *atkbd = container_of(ps2dev, struct atkbd, ps2dev);
446 struct input_dev *dev = atkbd->dev;
447 unsigned int code = data;
448 int scroll = 0, hscroll = 0, click = -1;
449 int value;
450 unsigned short keycode;
451
452 pm_wakeup_event(&serio->dev, 0);
453
454 if (!atkbd->enabled)
455 return;
456
457 input_event(dev, EV_MSC, MSC_RAW, code);
458
459 if (atkbd_platform_scancode_fixup)
460 code = atkbd_platform_scancode_fixup(atkbd, code);
461
462 if (atkbd->translated) {
463
464 if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) {
465 atkbd->release = code >> 7;
466 code &= 0x7f;
467 }
468
469 if (!atkbd->emul)
470 atkbd_calculate_xl_bit(atkbd, data);
471 }
472
473 switch (code) {
474 case ATKBD_RET_BAT:
475 atkbd->enabled = false;
476 serio_reconnect(atkbd->ps2dev.serio);
477 return;
478 case ATKBD_RET_EMUL0:
479 atkbd->emul = 1;
480 return;
481 case ATKBD_RET_EMUL1:
482 atkbd->emul = 2;
483 return;
484 case ATKBD_RET_RELEASE:
485 atkbd->release = true;
486 return;
487 case ATKBD_RET_ACK:
488 case ATKBD_RET_NAK:
489 if (printk_ratelimit())
490 dev_warn(&serio->dev,
491 "Spurious %s on %s. "
492 "Some program might be trying to access hardware directly.\n",
493 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
494 return;
495 case ATKBD_RET_ERR:
496 atkbd->err_count++;
497 dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n",
498 serio->phys);
499 return;
500 }
501
502 code = atkbd_compat_scancode(atkbd, code);
503
504 if (atkbd->emul && --atkbd->emul)
505 return;
506
507 keycode = atkbd->keycode[code];
508
509 if (!(atkbd->release && test_bit(code, atkbd->force_release_mask)))
510 if (keycode != ATKBD_KEY_NULL)
511 input_event(dev, EV_MSC, MSC_SCAN, code);
512
513 switch (keycode) {
514 case ATKBD_KEY_NULL:
515 break;
516 case ATKBD_KEY_UNKNOWN:
517 dev_warn(&serio->dev,
518 "Unknown key %s (%s set %d, code %#x on %s).\n",
519 atkbd->release ? "released" : "pressed",
520 atkbd->translated ? "translated" : "raw",
521 atkbd->set, code, serio->phys);
522 dev_warn(&serio->dev,
523 "Use 'setkeycodes %s%02x <keycode>' to make it known.\n",
524 code & 0x80 ? "e0" : "", code & 0x7f);
525 input_sync(dev);
526 break;
527 case ATKBD_SCR_1:
528 scroll = 1;
529 break;
530 case ATKBD_SCR_2:
531 scroll = 2;
532 break;
533 case ATKBD_SCR_4:
534 scroll = 4;
535 break;
536 case ATKBD_SCR_8:
537 scroll = 8;
538 break;
539 case ATKBD_SCR_CLICK:
540 click = !atkbd->release;
541 break;
542 case ATKBD_SCR_LEFT:
543 hscroll = -1;
544 break;
545 case ATKBD_SCR_RIGHT:
546 hscroll = 1;
547 break;
548 default:
549 if (atkbd->release) {
550 value = 0;
551 atkbd->last = 0;
552 } else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) {
553 /* Workaround Toshiba laptop multiple keypress */
554 value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2;
555 } else {
556 value = 1;
557 atkbd->last = code;
558 atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2;
559 }
560
561 input_event(dev, EV_KEY, keycode, value);
562 input_sync(dev);
563
564 if (value && test_bit(code, atkbd->force_release_mask)) {
565 input_event(dev, EV_MSC, MSC_SCAN, code);
566 input_report_key(dev, keycode, 0);
567 input_sync(dev);
568 }
569 }
570
571 if (atkbd->scroll) {
572 if (click != -1)
573 input_report_key(dev, BTN_MIDDLE, click);
574 input_report_rel(dev, REL_WHEEL,
575 atkbd->release ? -scroll : scroll);
576 input_report_rel(dev, REL_HWHEEL, hscroll);
577 input_sync(dev);
578 }
579
580 atkbd->release = false;
581 }
582
atkbd_set_repeat_rate(struct atkbd * atkbd)583 static int atkbd_set_repeat_rate(struct atkbd *atkbd)
584 {
585 const short period[32] =
586 { 33, 37, 42, 46, 50, 54, 58, 63, 67, 75, 83, 92, 100, 109, 116, 125,
587 133, 149, 167, 182, 200, 217, 232, 250, 270, 303, 333, 370, 400, 435, 470, 500 };
588 const short delay[4] =
589 { 250, 500, 750, 1000 };
590
591 struct input_dev *dev = atkbd->dev;
592 unsigned char param;
593 int i = 0, j = 0;
594
595 while (i < ARRAY_SIZE(period) - 1 && period[i] < dev->rep[REP_PERIOD])
596 i++;
597 dev->rep[REP_PERIOD] = period[i];
598
599 while (j < ARRAY_SIZE(delay) - 1 && delay[j] < dev->rep[REP_DELAY])
600 j++;
601 dev->rep[REP_DELAY] = delay[j];
602
603 param = i | (j << 5);
604 return ps2_command(&atkbd->ps2dev, ¶m, ATKBD_CMD_SETREP);
605 }
606
atkbd_set_leds(struct atkbd * atkbd)607 static int atkbd_set_leds(struct atkbd *atkbd)
608 {
609 struct input_dev *dev = atkbd->dev;
610 unsigned char param[2];
611
612 param[0] = (test_bit(LED_SCROLLL, dev->led) ? 1 : 0)
613 | (test_bit(LED_NUML, dev->led) ? 2 : 0)
614 | (test_bit(LED_CAPSL, dev->led) ? 4 : 0);
615 if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_SETLEDS))
616 return -1;
617
618 if (atkbd->extra) {
619 param[0] = 0;
620 param[1] = (test_bit(LED_COMPOSE, dev->led) ? 0x01 : 0)
621 | (test_bit(LED_SLEEP, dev->led) ? 0x02 : 0)
622 | (test_bit(LED_SUSPEND, dev->led) ? 0x04 : 0)
623 | (test_bit(LED_MISC, dev->led) ? 0x10 : 0)
624 | (test_bit(LED_MUTE, dev->led) ? 0x20 : 0);
625 if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_EX_SETLEDS))
626 return -1;
627 }
628
629 return 0;
630 }
631
632 /*
633 * atkbd_event_work() is used to complete processing of events that
634 * can not be processed by input_event() which is often called from
635 * interrupt context.
636 */
637
atkbd_event_work(struct work_struct * work)638 static void atkbd_event_work(struct work_struct *work)
639 {
640 struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work);
641
642 guard(mutex)(&atkbd->mutex);
643
644 if (!atkbd->enabled) {
645 /*
646 * Serio ports are resumed asynchronously so while driver core
647 * thinks that device is already fully operational in reality
648 * it may not be ready yet. In this case we need to keep
649 * rescheduling till reconnect completes.
650 */
651 schedule_delayed_work(&atkbd->event_work,
652 msecs_to_jiffies(100));
653 } else {
654 if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask))
655 atkbd_set_leds(atkbd);
656
657 if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask))
658 atkbd_set_repeat_rate(atkbd);
659 }
660 }
661
662 /*
663 * Schedule switch for execution. We need to throttle requests,
664 * otherwise keyboard may become unresponsive.
665 */
atkbd_schedule_event_work(struct atkbd * atkbd,int event_bit)666 static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit)
667 {
668 unsigned long delay = msecs_to_jiffies(50);
669
670 if (time_after(jiffies, atkbd->event_jiffies + delay))
671 delay = 0;
672
673 atkbd->event_jiffies = jiffies;
674 set_bit(event_bit, &atkbd->event_mask);
675 mb();
676 schedule_delayed_work(&atkbd->event_work, delay);
677 }
678
679 /*
680 * Event callback from the input module. Events that change the state of
681 * the hardware are processed here. If action can not be performed in
682 * interrupt context it is offloaded to atkbd_event_work.
683 */
684
atkbd_event(struct input_dev * dev,unsigned int type,unsigned int code,int value)685 static int atkbd_event(struct input_dev *dev,
686 unsigned int type, unsigned int code, int value)
687 {
688 struct atkbd *atkbd = input_get_drvdata(dev);
689
690 if (!atkbd->write)
691 return -1;
692
693 switch (type) {
694
695 case EV_LED:
696 atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT);
697 return 0;
698
699 case EV_REP:
700 if (!atkbd->softrepeat)
701 atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT);
702 return 0;
703
704 default:
705 return -1;
706 }
707 }
708
709 /*
710 * atkbd_enable() signals that interrupt handler is allowed to
711 * generate input events.
712 */
713
atkbd_enable(struct atkbd * atkbd)714 static inline void atkbd_enable(struct atkbd *atkbd)
715 {
716 serio_pause_rx(atkbd->ps2dev.serio);
717 atkbd->enabled = true;
718 serio_continue_rx(atkbd->ps2dev.serio);
719 }
720
721 /*
722 * atkbd_disable() tells input handler that all incoming data except
723 * for ACKs and command response should be dropped.
724 */
725
atkbd_disable(struct atkbd * atkbd)726 static inline void atkbd_disable(struct atkbd *atkbd)
727 {
728 serio_pause_rx(atkbd->ps2dev.serio);
729 atkbd->enabled = false;
730 serio_continue_rx(atkbd->ps2dev.serio);
731 }
732
atkbd_activate(struct atkbd * atkbd)733 static int atkbd_activate(struct atkbd *atkbd)
734 {
735 struct ps2dev *ps2dev = &atkbd->ps2dev;
736
737 /*
738 * Enable the keyboard to receive keystrokes.
739 */
740
741 if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
742 dev_err(&ps2dev->serio->dev,
743 "Failed to enable keyboard on %s\n",
744 ps2dev->serio->phys);
745 return -1;
746 }
747
748 return 0;
749 }
750
751 /*
752 * atkbd_deactivate() resets and disables the keyboard from sending
753 * keystrokes.
754 */
755
atkbd_deactivate(struct atkbd * atkbd)756 static void atkbd_deactivate(struct atkbd *atkbd)
757 {
758 struct ps2dev *ps2dev = &atkbd->ps2dev;
759
760 if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_DIS))
761 dev_err(&ps2dev->serio->dev,
762 "Failed to deactivate keyboard on %s\n",
763 ps2dev->serio->phys);
764 }
765
766 #ifdef CONFIG_X86
atkbd_is_portable_device(void)767 static bool atkbd_is_portable_device(void)
768 {
769 static const char * const chassis_types[] = {
770 "8", /* Portable */
771 "9", /* Laptop */
772 "10", /* Notebook */
773 "14", /* Sub-Notebook */
774 "31", /* Convertible */
775 "32", /* Detachable */
776 };
777 int i;
778
779 for (i = 0; i < ARRAY_SIZE(chassis_types); i++)
780 if (dmi_match(DMI_CHASSIS_TYPE, chassis_types[i]))
781 return true;
782
783 return false;
784 }
785
786 /*
787 * On many modern laptops ATKBD_CMD_GETID may cause problems, on these laptops
788 * the controller is always in translated mode. In this mode mice/touchpads will
789 * not work. So in this case simply assume a keyboard is connected to avoid
790 * confusing some laptop keyboards.
791 *
792 * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using the standard
793 * 0xab83 id is ok in translated mode, only atkbd_select_set() checks atkbd->id
794 * and in translated mode that is a no-op.
795 */
atkbd_skip_getid(struct atkbd * atkbd)796 static bool atkbd_skip_getid(struct atkbd *atkbd)
797 {
798 return atkbd->translated && atkbd_is_portable_device();
799 }
800 #else
atkbd_skip_getid(struct atkbd * atkbd)801 static inline bool atkbd_skip_getid(struct atkbd *atkbd) { return false; }
802 #endif
803
804 /*
805 * atkbd_probe() probes for an AT keyboard on a serio port.
806 */
807
atkbd_probe(struct atkbd * atkbd)808 static int atkbd_probe(struct atkbd *atkbd)
809 {
810 struct ps2dev *ps2dev = &atkbd->ps2dev;
811 unsigned char param[2];
812
813 /*
814 * Some systems, where the bit-twiddling when testing the io-lines of the
815 * controller may confuse the keyboard need a full reset of the keyboard. On
816 * these systems the BIOS also usually doesn't do it for us.
817 */
818
819 if (atkbd_reset)
820 if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT))
821 dev_warn(&ps2dev->serio->dev,
822 "keyboard reset failed on %s\n",
823 ps2dev->serio->phys);
824
825 if (atkbd_skip_getid(atkbd)) {
826 atkbd->id = 0xab83;
827 goto deactivate_kbd;
828 }
829
830 /*
831 * Then we check the keyboard ID. We should get 0xab83 under normal conditions.
832 * Some keyboards report different values, but the first byte is always 0xab or
833 * 0xac. Some old AT keyboards don't report anything. If a mouse is connected, this
834 * should make sure we don't try to set the LEDs on it.
835 */
836
837 param[0] = param[1] = 0xa5; /* initialize with invalid values */
838 if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
839
840 /*
841 * If the get ID command failed, we check if we can at least set
842 * the LEDs on the keyboard. This should work on every keyboard out there.
843 * It also turns the LEDs off, which we want anyway.
844 */
845 param[0] = 0;
846 if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
847 return -1;
848 atkbd->id = 0xabba;
849 return 0;
850 }
851
852 if (!ps2_is_keyboard_id(param[0]))
853 return -1;
854
855 atkbd->id = (param[0] << 8) | param[1];
856
857 if (atkbd->id == 0xaca1 && atkbd->translated) {
858 dev_err(&ps2dev->serio->dev,
859 "NCD terminal keyboards are only supported on non-translating controllers. "
860 "Use i8042.direct=1 to disable translation.\n");
861 return -1;
862 }
863
864 deactivate_kbd:
865 /*
866 * Make sure nothing is coming from the keyboard and disturbs our
867 * internal state.
868 */
869 if (!atkbd_skip_deactivate)
870 atkbd_deactivate(atkbd);
871
872 return 0;
873 }
874
875 /*
876 * atkbd_select_set checks if a keyboard has a working Set 3 support, and
877 * sets it into that. Unfortunately there are keyboards that can be switched
878 * to Set 3, but don't work well in that (BTC Multimedia ...)
879 */
880
atkbd_select_set(struct atkbd * atkbd,int target_set,int allow_extra)881 static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra)
882 {
883 struct ps2dev *ps2dev = &atkbd->ps2dev;
884 unsigned char param[2];
885
886 atkbd->extra = false;
887 /*
888 * For known special keyboards we can go ahead and set the correct set.
889 * We check for NCD PS/2 Sun, NorthGate OmniKey 101 and
890 * IBM RapidAccess / IBM EzButton / Chicony KBP-8993 keyboards.
891 */
892
893 if (atkbd->translated)
894 return 2;
895
896 if (atkbd->id == 0xaca1) {
897 param[0] = 3;
898 ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET);
899 return 3;
900 }
901
902 if (allow_extra) {
903 param[0] = 0x71;
904 if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) {
905 atkbd->extra = true;
906 return 2;
907 }
908 }
909
910 if (atkbd_terminal) {
911 ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB);
912 return 3;
913 }
914
915 if (target_set != 3)
916 return 2;
917
918 if (!ps2_command(ps2dev, param, ATKBD_CMD_OK_GETID)) {
919 atkbd->id = param[0] << 8 | param[1];
920 return 2;
921 }
922
923 param[0] = 3;
924 if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET))
925 return 2;
926
927 param[0] = 0;
928 if (ps2_command(ps2dev, param, ATKBD_CMD_GSCANSET))
929 return 2;
930
931 if (param[0] != 3) {
932 param[0] = 2;
933 if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET))
934 return 2;
935 }
936
937 ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MBR);
938
939 return 3;
940 }
941
atkbd_reset_state(struct atkbd * atkbd)942 static int atkbd_reset_state(struct atkbd *atkbd)
943 {
944 struct ps2dev *ps2dev = &atkbd->ps2dev;
945 unsigned char param[1];
946
947 /*
948 * Set the LEDs to a predefined state (all off).
949 */
950
951 param[0] = 0;
952 if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
953 return -1;
954
955 /*
956 * Set autorepeat to fastest possible.
957 */
958
959 param[0] = 0;
960 if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP))
961 return -1;
962
963 return 0;
964 }
965
966 /*
967 * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a
968 * reboot.
969 */
970
atkbd_cleanup(struct serio * serio)971 static void atkbd_cleanup(struct serio *serio)
972 {
973 struct atkbd *atkbd = atkbd_from_serio(serio);
974
975 atkbd_disable(atkbd);
976 ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF);
977 }
978
979
980 /*
981 * atkbd_disconnect() closes and frees.
982 */
983
atkbd_disconnect(struct serio * serio)984 static void atkbd_disconnect(struct serio *serio)
985 {
986 struct atkbd *atkbd = atkbd_from_serio(serio);
987
988 atkbd_disable(atkbd);
989
990 input_unregister_device(atkbd->dev);
991
992 /*
993 * Make sure we don't have a command in flight.
994 * Note that since atkbd->enabled is false event work will keep
995 * rescheduling itself until it gets canceled and will not try
996 * accessing freed input device or serio port.
997 */
998 cancel_delayed_work_sync(&atkbd->event_work);
999
1000 serio_close(serio);
1001 serio_set_drvdata(serio, NULL);
1002 kfree(atkbd);
1003 }
1004
1005 /*
1006 * generate release events for the keycodes given in data
1007 */
atkbd_apply_forced_release_keylist(struct atkbd * atkbd,const void * data)1008 static void atkbd_apply_forced_release_keylist(struct atkbd* atkbd,
1009 const void *data)
1010 {
1011 const unsigned int *keys = data;
1012 unsigned int i;
1013
1014 if (atkbd->set == 2)
1015 for (i = 0; keys[i] != -1U; i++)
1016 __set_bit(keys[i], atkbd->force_release_mask);
1017 }
1018
1019 /*
1020 * Most special keys (Fn+F?) on Dell laptops do not generate release
1021 * events so we have to do it ourselves.
1022 */
1023 static unsigned int atkbd_dell_laptop_forced_release_keys[] = {
1024 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U
1025 };
1026
1027 /*
1028 * Perform fixup for HP system that doesn't generate release
1029 * for its video switch
1030 */
1031 static unsigned int atkbd_hp_forced_release_keys[] = {
1032 0x94, -1U
1033 };
1034
1035 /*
1036 * Samsung NC10,NC20 with Fn+F? key release not working
1037 */
1038 static unsigned int atkbd_samsung_forced_release_keys[] = {
1039 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
1040 };
1041
1042 /*
1043 * Amilo Pi 3525 key release for Fn+Volume keys not working
1044 */
1045 static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = {
1046 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U
1047 };
1048
1049 /*
1050 * Amilo Xi 3650 key release for light touch bar not working
1051 */
1052 static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
1053 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U
1054 };
1055
1056 /*
1057 * Soltech TA12 system with broken key release on volume keys and mute key
1058 */
1059 static unsigned int atkdb_soltech_ta12_forced_release_keys[] = {
1060 0xa0, 0xae, 0xb0, -1U
1061 };
1062
1063 /*
1064 * Many notebooks don't send key release event for volume up/down
1065 * keys, with key list below common among them
1066 */
1067 static unsigned int atkbd_volume_forced_release_keys[] = {
1068 0xae, 0xb0, -1U
1069 };
1070
1071 /*
1072 * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas
1073 * they should be generating e4-e6 (0x80 | code).
1074 */
atkbd_oqo_01plus_scancode_fixup(struct atkbd * atkbd,unsigned int code)1075 static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd,
1076 unsigned int code)
1077 {
1078 if (atkbd->translated && atkbd->emul == 1 &&
1079 (code == 0x64 || code == 0x65 || code == 0x66)) {
1080 atkbd->emul = 0;
1081 code |= 0x80;
1082 }
1083
1084 return code;
1085 }
1086
atkbd_get_keymap_from_fwnode(struct atkbd * atkbd)1087 static int atkbd_get_keymap_from_fwnode(struct atkbd *atkbd)
1088 {
1089 struct device *dev = &atkbd->ps2dev.serio->dev;
1090 int i, n;
1091 u32 *ptr;
1092 u16 scancode, keycode;
1093
1094 /* Parse "linux,keymap" property */
1095 n = device_property_count_u32(dev, "linux,keymap");
1096 if (n <= 0 || n > ATKBD_KEYMAP_SIZE)
1097 return -ENXIO;
1098
1099 ptr = kcalloc(n, sizeof(u32), GFP_KERNEL);
1100 if (!ptr)
1101 return -ENOMEM;
1102
1103 if (device_property_read_u32_array(dev, "linux,keymap", ptr, n)) {
1104 dev_err(dev, "problem parsing FW keymap property\n");
1105 kfree(ptr);
1106 return -EINVAL;
1107 }
1108
1109 memset(atkbd->keycode, 0, sizeof(atkbd->keycode));
1110 for (i = 0; i < n; i++) {
1111 scancode = SCANCODE(ptr[i]);
1112 keycode = KEYCODE(ptr[i]);
1113 atkbd->keycode[scancode] = keycode;
1114 }
1115
1116 kfree(ptr);
1117 return 0;
1118 }
1119
1120 /*
1121 * atkbd_set_keycode_table() initializes keyboard's keycode table
1122 * according to the selected scancode set
1123 */
1124
atkbd_set_keycode_table(struct atkbd * atkbd)1125 static void atkbd_set_keycode_table(struct atkbd *atkbd)
1126 {
1127 struct device *dev = &atkbd->ps2dev.serio->dev;
1128 unsigned int scancode;
1129 int i, j;
1130
1131 memset(atkbd->keycode, 0, sizeof(atkbd->keycode));
1132 bitmap_zero(atkbd->force_release_mask, ATKBD_KEYMAP_SIZE);
1133
1134 if (!atkbd_get_keymap_from_fwnode(atkbd)) {
1135 dev_dbg(dev, "Using FW keymap\n");
1136 } else if (atkbd->translated) {
1137 for (i = 0; i < 128; i++) {
1138 scancode = atkbd_unxlate_table[i];
1139 atkbd->keycode[i] = atkbd_set2_keycode[scancode];
1140 atkbd->keycode[i | 0x80] = atkbd_set2_keycode[scancode | 0x80];
1141 if (atkbd->scroll)
1142 for (j = 0; j < ARRAY_SIZE(atkbd_scroll_keys); j++)
1143 if ((scancode | 0x80) == atkbd_scroll_keys[j].set2)
1144 atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode;
1145 }
1146 } else if (atkbd->set == 3) {
1147 memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
1148 } else {
1149 memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
1150
1151 if (atkbd->scroll)
1152 for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) {
1153 scancode = atkbd_scroll_keys[i].set2;
1154 atkbd->keycode[scancode] = atkbd_scroll_keys[i].keycode;
1155 }
1156 }
1157
1158 /*
1159 * HANGEUL and HANJA keys do not send release events so we need to
1160 * generate such events ourselves
1161 */
1162 scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL);
1163 atkbd->keycode[scancode] = KEY_HANGEUL;
1164 __set_bit(scancode, atkbd->force_release_mask);
1165
1166 scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA);
1167 atkbd->keycode[scancode] = KEY_HANJA;
1168 __set_bit(scancode, atkbd->force_release_mask);
1169
1170 /*
1171 * Perform additional fixups
1172 */
1173 if (atkbd_platform_fixup)
1174 atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data);
1175 }
1176
1177 /*
1178 * atkbd_set_device_attrs() sets up keyboard's input device structure
1179 */
1180
atkbd_set_device_attrs(struct atkbd * atkbd)1181 static void atkbd_set_device_attrs(struct atkbd *atkbd)
1182 {
1183 struct input_dev *input_dev = atkbd->dev;
1184 int i;
1185
1186 if (atkbd->extra)
1187 snprintf(atkbd->name, sizeof(atkbd->name),
1188 "AT Set 2 Extra keyboard");
1189 else
1190 snprintf(atkbd->name, sizeof(atkbd->name),
1191 "AT %s Set %d keyboard",
1192 atkbd->translated ? "Translated" : "Raw", atkbd->set);
1193
1194 snprintf(atkbd->phys, sizeof(atkbd->phys),
1195 "%s/input0", atkbd->ps2dev.serio->phys);
1196
1197 input_dev->name = atkbd->name;
1198 input_dev->phys = atkbd->phys;
1199 input_dev->id.bustype = BUS_I8042;
1200 input_dev->id.vendor = 0x0001;
1201 input_dev->id.product = atkbd->translated ? 1 : atkbd->set;
1202 input_dev->id.version = atkbd->id;
1203 input_dev->event = atkbd_event;
1204 input_dev->dev.parent = &atkbd->ps2dev.serio->dev;
1205
1206 input_set_drvdata(input_dev, atkbd);
1207
1208 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
1209 BIT_MASK(EV_MSC);
1210
1211 if (atkbd->write) {
1212 input_dev->evbit[0] |= BIT_MASK(EV_LED);
1213 input_dev->ledbit[0] = BIT_MASK(LED_NUML) |
1214 BIT_MASK(LED_CAPSL) | BIT_MASK(LED_SCROLLL);
1215 }
1216
1217 if (atkbd->extra)
1218 input_dev->ledbit[0] |= BIT_MASK(LED_COMPOSE) |
1219 BIT_MASK(LED_SUSPEND) | BIT_MASK(LED_SLEEP) |
1220 BIT_MASK(LED_MUTE) | BIT_MASK(LED_MISC);
1221
1222 if (!atkbd->softrepeat) {
1223 input_dev->rep[REP_DELAY] = 250;
1224 input_dev->rep[REP_PERIOD] = 33;
1225 }
1226
1227 input_dev->mscbit[0] = atkbd->softraw ? BIT_MASK(MSC_SCAN) :
1228 BIT_MASK(MSC_RAW) | BIT_MASK(MSC_SCAN);
1229
1230 if (atkbd->scroll) {
1231 input_dev->evbit[0] |= BIT_MASK(EV_REL);
1232 input_dev->relbit[0] = BIT_MASK(REL_WHEEL) |
1233 BIT_MASK(REL_HWHEEL);
1234 __set_bit(BTN_MIDDLE, input_dev->keybit);
1235 }
1236
1237 input_dev->keycode = atkbd->keycode;
1238 input_dev->keycodesize = sizeof(unsigned short);
1239 input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
1240
1241 for (i = 0; i < ATKBD_KEYMAP_SIZE; i++) {
1242 if (atkbd->keycode[i] != KEY_RESERVED &&
1243 atkbd->keycode[i] != ATKBD_KEY_NULL &&
1244 atkbd->keycode[i] < ATKBD_SPECIAL) {
1245 __set_bit(atkbd->keycode[i], input_dev->keybit);
1246 }
1247 }
1248 }
1249
atkbd_parse_fwnode_data(struct serio * serio)1250 static void atkbd_parse_fwnode_data(struct serio *serio)
1251 {
1252 struct atkbd *atkbd = atkbd_from_serio(serio);
1253 struct device *dev = &serio->dev;
1254 int n;
1255
1256 /* Parse "function-row-physmap" property */
1257 n = device_property_count_u32(dev, "function-row-physmap");
1258 if (n > 0 && n <= VIVALDI_MAX_FUNCTION_ROW_KEYS &&
1259 !device_property_read_u32_array(dev, "function-row-physmap",
1260 atkbd->vdata.function_row_physmap,
1261 n)) {
1262 atkbd->vdata.num_function_row_keys = n;
1263 dev_dbg(dev, "FW reported %d function-row key locations\n", n);
1264 }
1265 }
1266
1267 /*
1268 * atkbd_connect() is called when the serio module finds an interface
1269 * that isn't handled yet by an appropriate device driver. We check if
1270 * there is an AT keyboard out there and if yes, we register ourselves
1271 * to the input module.
1272 */
1273
atkbd_connect(struct serio * serio,struct serio_driver * drv)1274 static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
1275 {
1276 struct atkbd *atkbd;
1277 struct input_dev *dev;
1278 int err = -ENOMEM;
1279
1280 atkbd = kzalloc(sizeof(*atkbd), GFP_KERNEL);
1281 dev = input_allocate_device();
1282 if (!atkbd || !dev)
1283 goto fail1;
1284
1285 atkbd->dev = dev;
1286 ps2_init(&atkbd->ps2dev, serio,
1287 atkbd_pre_receive_byte, atkbd_receive_byte);
1288 INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work);
1289 mutex_init(&atkbd->mutex);
1290
1291 switch (serio->id.type) {
1292
1293 case SERIO_8042_XL:
1294 atkbd->translated = true;
1295 fallthrough;
1296
1297 case SERIO_8042:
1298 if (serio->write)
1299 atkbd->write = true;
1300 break;
1301 }
1302
1303 atkbd->softraw = atkbd_softraw;
1304 atkbd->softrepeat = atkbd_softrepeat;
1305 atkbd->scroll = atkbd_scroll;
1306
1307 if (atkbd->softrepeat)
1308 atkbd->softraw = true;
1309
1310 serio_set_drvdata(serio, atkbd);
1311
1312 err = serio_open(serio, drv);
1313 if (err)
1314 goto fail2;
1315
1316 if (atkbd->write) {
1317
1318 if (atkbd_probe(atkbd)) {
1319 err = -ENODEV;
1320 goto fail3;
1321 }
1322
1323 atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
1324 atkbd_reset_state(atkbd);
1325
1326 } else {
1327 atkbd->set = 2;
1328 atkbd->id = 0xab00;
1329 }
1330
1331 atkbd_parse_fwnode_data(serio);
1332
1333 atkbd_set_keycode_table(atkbd);
1334 atkbd_set_device_attrs(atkbd);
1335
1336 atkbd_enable(atkbd);
1337 if (serio->write)
1338 atkbd_activate(atkbd);
1339
1340 err = input_register_device(atkbd->dev);
1341 if (err)
1342 goto fail3;
1343
1344 return 0;
1345
1346 fail3: serio_close(serio);
1347 fail2: serio_set_drvdata(serio, NULL);
1348 fail1: input_free_device(dev);
1349 kfree(atkbd);
1350 return err;
1351 }
1352
1353 /*
1354 * atkbd_reconnect() tries to restore keyboard into a sane state and is
1355 * most likely called on resume.
1356 */
1357
atkbd_reconnect(struct serio * serio)1358 static int atkbd_reconnect(struct serio *serio)
1359 {
1360 struct atkbd *atkbd = atkbd_from_serio(serio);
1361 struct serio_driver *drv = serio->drv;
1362 int error;
1363
1364 if (!atkbd || !drv) {
1365 dev_dbg(&serio->dev,
1366 "reconnect request, but serio is disconnected, ignoring...\n");
1367 return -1;
1368 }
1369
1370 guard(mutex)(&atkbd->mutex);
1371
1372 atkbd_disable(atkbd);
1373
1374 if (atkbd->write) {
1375 error = atkbd_probe(atkbd);
1376 if (error)
1377 return error;
1378
1379 if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
1380 return -EIO;
1381
1382 /*
1383 * Restore LED state and repeat rate. While input core
1384 * will do this for us at resume time reconnect may happen
1385 * because user requested it via sysfs or simply because
1386 * keyboard was unplugged and plugged in again so we need
1387 * to do it ourselves here.
1388 */
1389 atkbd_set_leds(atkbd);
1390 if (!atkbd->softrepeat)
1391 atkbd_set_repeat_rate(atkbd);
1392
1393 }
1394
1395 /*
1396 * Reset our state machine in case reconnect happened in the middle
1397 * of multi-byte scancode.
1398 */
1399 atkbd->xl_bit = 0;
1400 atkbd->emul = 0;
1401
1402 atkbd_enable(atkbd);
1403 if (atkbd->write)
1404 atkbd_activate(atkbd);
1405
1406 return 0;
1407 }
1408
1409 static const struct serio_device_id atkbd_serio_ids[] = {
1410 {
1411 .type = SERIO_8042,
1412 .proto = SERIO_ANY,
1413 .id = SERIO_ANY,
1414 .extra = SERIO_ANY,
1415 },
1416 {
1417 .type = SERIO_8042_XL,
1418 .proto = SERIO_ANY,
1419 .id = SERIO_ANY,
1420 .extra = SERIO_ANY,
1421 },
1422 {
1423 .type = SERIO_RS232,
1424 .proto = SERIO_PS2SER,
1425 .id = SERIO_ANY,
1426 .extra = SERIO_ANY,
1427 },
1428 { 0 }
1429 };
1430
1431 MODULE_DEVICE_TABLE(serio, atkbd_serio_ids);
1432
1433 static struct serio_driver atkbd_drv = {
1434 .driver = {
1435 .name = "atkbd",
1436 .dev_groups = atkbd_attribute_groups,
1437 },
1438 .description = DRIVER_DESC,
1439 .id_table = atkbd_serio_ids,
1440 .interrupt = ps2_interrupt,
1441 .connect = atkbd_connect,
1442 .reconnect = atkbd_reconnect,
1443 .disconnect = atkbd_disconnect,
1444 .cleanup = atkbd_cleanup,
1445 };
1446
atkbd_attr_show_helper(struct device * dev,char * buf,ssize_t (* handler)(struct atkbd *,char *))1447 static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
1448 ssize_t (*handler)(struct atkbd *, char *))
1449 {
1450 struct serio *serio = to_serio_port(dev);
1451 struct atkbd *atkbd = atkbd_from_serio(serio);
1452
1453 return handler(atkbd, buf);
1454 }
1455
atkbd_attr_set_helper(struct device * dev,const char * buf,size_t count,ssize_t (* handler)(struct atkbd *,const char *,size_t))1456 static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
1457 ssize_t (*handler)(struct atkbd *, const char *, size_t))
1458 {
1459 struct serio *serio = to_serio_port(dev);
1460 struct atkbd *atkbd = atkbd_from_serio(serio);
1461 int retval;
1462
1463 scoped_guard(mutex_intr, &atkbd->mutex) {
1464 atkbd_disable(atkbd);
1465 retval = handler(atkbd, buf, count);
1466 atkbd_enable(atkbd);
1467
1468 return retval;
1469 }
1470
1471 return -EINTR;
1472 }
1473
atkbd_show_extra(struct atkbd * atkbd,char * buf)1474 static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf)
1475 {
1476 return sprintf(buf, "%d\n", atkbd->extra ? 1 : 0);
1477 }
1478
atkbd_set_extra(struct atkbd * atkbd,const char * buf,size_t count)1479 static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count)
1480 {
1481 struct input_dev *old_dev, *new_dev;
1482 unsigned int value;
1483 int err;
1484 bool old_extra;
1485 unsigned char old_set;
1486
1487 if (!atkbd->write)
1488 return -EIO;
1489
1490 err = kstrtouint(buf, 10, &value);
1491 if (err)
1492 return err;
1493
1494 if (value > 1)
1495 return -EINVAL;
1496
1497 if (atkbd->extra != value) {
1498 /*
1499 * Since device's properties will change we need to
1500 * unregister old device. But allocate and register
1501 * new one first to make sure we have it.
1502 */
1503 old_dev = atkbd->dev;
1504 old_extra = atkbd->extra;
1505 old_set = atkbd->set;
1506
1507 new_dev = input_allocate_device();
1508 if (!new_dev)
1509 return -ENOMEM;
1510
1511 atkbd->dev = new_dev;
1512 atkbd->set = atkbd_select_set(atkbd, atkbd->set, value);
1513 atkbd_reset_state(atkbd);
1514 atkbd_activate(atkbd);
1515 atkbd_set_keycode_table(atkbd);
1516 atkbd_set_device_attrs(atkbd);
1517
1518 err = input_register_device(atkbd->dev);
1519 if (err) {
1520 input_free_device(new_dev);
1521
1522 atkbd->dev = old_dev;
1523 atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
1524 atkbd_set_keycode_table(atkbd);
1525 atkbd_set_device_attrs(atkbd);
1526
1527 return err;
1528 }
1529 input_unregister_device(old_dev);
1530
1531 }
1532 return count;
1533 }
1534
atkbd_show_force_release(struct atkbd * atkbd,char * buf)1535 static ssize_t atkbd_show_force_release(struct atkbd *atkbd, char *buf)
1536 {
1537 size_t len = scnprintf(buf, PAGE_SIZE - 1, "%*pbl",
1538 ATKBD_KEYMAP_SIZE, atkbd->force_release_mask);
1539
1540 buf[len++] = '\n';
1541 buf[len] = '\0';
1542
1543 return len;
1544 }
1545
atkbd_set_force_release(struct atkbd * atkbd,const char * buf,size_t count)1546 static ssize_t atkbd_set_force_release(struct atkbd *atkbd,
1547 const char *buf, size_t count)
1548 {
1549 /* 64 bytes on stack should be acceptable */
1550 DECLARE_BITMAP(new_mask, ATKBD_KEYMAP_SIZE);
1551 int err;
1552
1553 err = bitmap_parselist(buf, new_mask, ATKBD_KEYMAP_SIZE);
1554 if (err)
1555 return err;
1556
1557 memcpy(atkbd->force_release_mask, new_mask, sizeof(atkbd->force_release_mask));
1558 return count;
1559 }
1560
1561
atkbd_show_scroll(struct atkbd * atkbd,char * buf)1562 static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf)
1563 {
1564 return sprintf(buf, "%d\n", atkbd->scroll ? 1 : 0);
1565 }
1566
atkbd_set_scroll(struct atkbd * atkbd,const char * buf,size_t count)1567 static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count)
1568 {
1569 struct input_dev *old_dev, *new_dev;
1570 unsigned int value;
1571 int err;
1572 bool old_scroll;
1573
1574 err = kstrtouint(buf, 10, &value);
1575 if (err)
1576 return err;
1577
1578 if (value > 1)
1579 return -EINVAL;
1580
1581 if (atkbd->scroll != value) {
1582 old_dev = atkbd->dev;
1583 old_scroll = atkbd->scroll;
1584
1585 new_dev = input_allocate_device();
1586 if (!new_dev)
1587 return -ENOMEM;
1588
1589 atkbd->dev = new_dev;
1590 atkbd->scroll = value;
1591 atkbd_set_keycode_table(atkbd);
1592 atkbd_set_device_attrs(atkbd);
1593
1594 err = input_register_device(atkbd->dev);
1595 if (err) {
1596 input_free_device(new_dev);
1597
1598 atkbd->scroll = old_scroll;
1599 atkbd->dev = old_dev;
1600 atkbd_set_keycode_table(atkbd);
1601 atkbd_set_device_attrs(atkbd);
1602
1603 return err;
1604 }
1605 input_unregister_device(old_dev);
1606 }
1607 return count;
1608 }
1609
atkbd_show_set(struct atkbd * atkbd,char * buf)1610 static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf)
1611 {
1612 return sprintf(buf, "%d\n", atkbd->set);
1613 }
1614
atkbd_set_set(struct atkbd * atkbd,const char * buf,size_t count)1615 static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
1616 {
1617 struct input_dev *old_dev, *new_dev;
1618 unsigned int value;
1619 int err;
1620 unsigned char old_set;
1621 bool old_extra;
1622
1623 if (!atkbd->write)
1624 return -EIO;
1625
1626 err = kstrtouint(buf, 10, &value);
1627 if (err)
1628 return err;
1629
1630 if (value != 2 && value != 3)
1631 return -EINVAL;
1632
1633 if (atkbd->set != value) {
1634 old_dev = atkbd->dev;
1635 old_extra = atkbd->extra;
1636 old_set = atkbd->set;
1637
1638 new_dev = input_allocate_device();
1639 if (!new_dev)
1640 return -ENOMEM;
1641
1642 atkbd->dev = new_dev;
1643 atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
1644 atkbd_reset_state(atkbd);
1645 atkbd_activate(atkbd);
1646 atkbd_set_keycode_table(atkbd);
1647 atkbd_set_device_attrs(atkbd);
1648
1649 err = input_register_device(atkbd->dev);
1650 if (err) {
1651 input_free_device(new_dev);
1652
1653 atkbd->dev = old_dev;
1654 atkbd->set = atkbd_select_set(atkbd, old_set, old_extra);
1655 atkbd_set_keycode_table(atkbd);
1656 atkbd_set_device_attrs(atkbd);
1657
1658 return err;
1659 }
1660 input_unregister_device(old_dev);
1661 }
1662 return count;
1663 }
1664
atkbd_show_softrepeat(struct atkbd * atkbd,char * buf)1665 static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf)
1666 {
1667 return sprintf(buf, "%d\n", atkbd->softrepeat ? 1 : 0);
1668 }
1669
atkbd_set_softrepeat(struct atkbd * atkbd,const char * buf,size_t count)1670 static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count)
1671 {
1672 struct input_dev *old_dev, *new_dev;
1673 unsigned int value;
1674 int err;
1675 bool old_softrepeat, old_softraw;
1676
1677 if (!atkbd->write)
1678 return -EIO;
1679
1680 err = kstrtouint(buf, 10, &value);
1681 if (err)
1682 return err;
1683
1684 if (value > 1)
1685 return -EINVAL;
1686
1687 if (atkbd->softrepeat != value) {
1688 old_dev = atkbd->dev;
1689 old_softrepeat = atkbd->softrepeat;
1690 old_softraw = atkbd->softraw;
1691
1692 new_dev = input_allocate_device();
1693 if (!new_dev)
1694 return -ENOMEM;
1695
1696 atkbd->dev = new_dev;
1697 atkbd->softrepeat = value;
1698 if (atkbd->softrepeat)
1699 atkbd->softraw = true;
1700 atkbd_set_device_attrs(atkbd);
1701
1702 err = input_register_device(atkbd->dev);
1703 if (err) {
1704 input_free_device(new_dev);
1705
1706 atkbd->dev = old_dev;
1707 atkbd->softrepeat = old_softrepeat;
1708 atkbd->softraw = old_softraw;
1709 atkbd_set_device_attrs(atkbd);
1710
1711 return err;
1712 }
1713 input_unregister_device(old_dev);
1714 }
1715 return count;
1716 }
1717
1718
atkbd_show_softraw(struct atkbd * atkbd,char * buf)1719 static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf)
1720 {
1721 return sprintf(buf, "%d\n", atkbd->softraw ? 1 : 0);
1722 }
1723
atkbd_set_softraw(struct atkbd * atkbd,const char * buf,size_t count)1724 static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count)
1725 {
1726 struct input_dev *old_dev, *new_dev;
1727 unsigned int value;
1728 int err;
1729 bool old_softraw;
1730
1731 err = kstrtouint(buf, 10, &value);
1732 if (err)
1733 return err;
1734
1735 if (value > 1)
1736 return -EINVAL;
1737
1738 if (atkbd->softraw != value) {
1739 old_dev = atkbd->dev;
1740 old_softraw = atkbd->softraw;
1741
1742 new_dev = input_allocate_device();
1743 if (!new_dev)
1744 return -ENOMEM;
1745
1746 atkbd->dev = new_dev;
1747 atkbd->softraw = value;
1748 atkbd_set_device_attrs(atkbd);
1749
1750 err = input_register_device(atkbd->dev);
1751 if (err) {
1752 input_free_device(new_dev);
1753
1754 atkbd->dev = old_dev;
1755 atkbd->softraw = old_softraw;
1756 atkbd_set_device_attrs(atkbd);
1757
1758 return err;
1759 }
1760 input_unregister_device(old_dev);
1761 }
1762 return count;
1763 }
1764
atkbd_show_err_count(struct atkbd * atkbd,char * buf)1765 static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf)
1766 {
1767 return sprintf(buf, "%lu\n", atkbd->err_count);
1768 }
1769
atkbd_setup_forced_release(const struct dmi_system_id * id)1770 static int __init atkbd_setup_forced_release(const struct dmi_system_id *id)
1771 {
1772 atkbd_platform_fixup = atkbd_apply_forced_release_keylist;
1773 atkbd_platform_fixup_data = id->driver_data;
1774
1775 return 1;
1776 }
1777
atkbd_setup_scancode_fixup(const struct dmi_system_id * id)1778 static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id)
1779 {
1780 atkbd_platform_scancode_fixup = id->driver_data;
1781
1782 return 1;
1783 }
1784
atkbd_deactivate_fixup(const struct dmi_system_id * id)1785 static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id)
1786 {
1787 atkbd_skip_deactivate = true;
1788 return 1;
1789 }
1790
1791 /*
1792 * NOTE: do not add any more "force release" quirks to this table. The
1793 * task of adjusting list of keys that should be "released" automatically
1794 * by the driver is now delegated to userspace tools, such as udev, so
1795 * submit such quirks there.
1796 */
1797 static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
1798 {
1799 .matches = {
1800 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
1801 DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
1802 },
1803 .callback = atkbd_setup_forced_release,
1804 .driver_data = atkbd_dell_laptop_forced_release_keys,
1805 },
1806 {
1807 .matches = {
1808 DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
1809 DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
1810 },
1811 .callback = atkbd_setup_forced_release,
1812 .driver_data = atkbd_dell_laptop_forced_release_keys,
1813 },
1814 {
1815 .matches = {
1816 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1817 DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"),
1818 },
1819 .callback = atkbd_setup_forced_release,
1820 .driver_data = atkbd_hp_forced_release_keys,
1821 },
1822 {
1823 .matches = {
1824 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1825 DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"),
1826 },
1827 .callback = atkbd_setup_forced_release,
1828 .driver_data = atkbd_volume_forced_release_keys,
1829 },
1830 {
1831 .matches = {
1832 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1833 DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"),
1834 },
1835 .callback = atkbd_setup_forced_release,
1836 .driver_data = atkbd_volume_forced_release_keys,
1837 },
1838 {
1839 .matches = {
1840 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1841 DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"),
1842 },
1843 .callback = atkbd_setup_forced_release,
1844 .driver_data = atkbd_volume_forced_release_keys,
1845 },
1846 {
1847 .matches = {
1848 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
1849 DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"),
1850 },
1851 .callback = atkbd_setup_forced_release,
1852 .driver_data = atkbd_volume_forced_release_keys,
1853 },
1854 {
1855 /* Inventec Symphony */
1856 .matches = {
1857 DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
1858 DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
1859 },
1860 .callback = atkbd_setup_forced_release,
1861 .driver_data = atkbd_volume_forced_release_keys,
1862 },
1863 {
1864 /* Samsung NC10 */
1865 .matches = {
1866 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
1867 DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
1868 },
1869 .callback = atkbd_setup_forced_release,
1870 .driver_data = atkbd_samsung_forced_release_keys,
1871 },
1872 {
1873 /* Samsung NC20 */
1874 .matches = {
1875 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
1876 DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
1877 },
1878 .callback = atkbd_setup_forced_release,
1879 .driver_data = atkbd_samsung_forced_release_keys,
1880 },
1881 {
1882 /* Samsung SQ45S70S */
1883 .matches = {
1884 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
1885 DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
1886 },
1887 .callback = atkbd_setup_forced_release,
1888 .driver_data = atkbd_samsung_forced_release_keys,
1889 },
1890 {
1891 /* Fujitsu Amilo PA 1510 */
1892 .matches = {
1893 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
1894 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"),
1895 },
1896 .callback = atkbd_setup_forced_release,
1897 .driver_data = atkbd_volume_forced_release_keys,
1898 },
1899 {
1900 /* Fujitsu Amilo Pi 3525 */
1901 .matches = {
1902 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
1903 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"),
1904 },
1905 .callback = atkbd_setup_forced_release,
1906 .driver_data = atkbd_amilo_pi3525_forced_release_keys,
1907 },
1908 {
1909 /* Fujitsu Amilo Xi 3650 */
1910 .matches = {
1911 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
1912 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"),
1913 },
1914 .callback = atkbd_setup_forced_release,
1915 .driver_data = atkbd_amilo_xi3650_forced_release_keys,
1916 },
1917 {
1918 .matches = {
1919 DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"),
1920 DMI_MATCH(DMI_PRODUCT_NAME, "TA12"),
1921 },
1922 .callback = atkbd_setup_forced_release,
1923 .driver_data = atkdb_soltech_ta12_forced_release_keys,
1924 },
1925 {
1926 /* OQO Model 01+ */
1927 .matches = {
1928 DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
1929 DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
1930 },
1931 .callback = atkbd_setup_scancode_fixup,
1932 .driver_data = atkbd_oqo_01plus_scancode_fixup,
1933 },
1934 {
1935 .matches = {
1936 DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
1937 },
1938 .callback = atkbd_deactivate_fixup,
1939 },
1940 { }
1941 };
1942
atkbd_init(void)1943 static int __init atkbd_init(void)
1944 {
1945 dmi_check_system(atkbd_dmi_quirk_table);
1946
1947 return serio_register_driver(&atkbd_drv);
1948 }
1949
atkbd_exit(void)1950 static void __exit atkbd_exit(void)
1951 {
1952 serio_unregister_driver(&atkbd_drv);
1953 }
1954
1955 module_init(atkbd_init);
1956 module_exit(atkbd_exit);
1957