1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2014 Synopsys, Inc. (www.synopsys.com)
4 */
5
6 #include <linux/interrupt.h>
7 #include <linux/module.h>
8 #include <linux/of.h>
9 #include <linux/irqdomain.h>
10 #include <linux/irqchip.h>
11 #include <asm/irq.h>
12
13 #define NR_EXCEPTIONS 16
14
15 struct bcr_irq_arcv2 {
16 #ifdef CONFIG_CPU_BIG_ENDIAN
17 unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
18 #else
19 unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
20 #endif
21 };
22
23 /*
24 * Early Hardware specific Interrupt setup
25 * -Called very early (start_kernel -> setup_arch -> setup_processor)
26 * -Platform Independent (must for any ARC Core)
27 * -Needed for each CPU (hence not foldable into init_IRQ)
28 */
arc_init_IRQ(void)29 void arc_init_IRQ(void)
30 {
31 unsigned int tmp, irq_prio, i;
32 struct bcr_irq_arcv2 irq_bcr;
33
34 struct aux_irq_ctrl {
35 #ifdef CONFIG_CPU_BIG_ENDIAN
36 unsigned int res3:18, save_idx_regs:1, res2:1,
37 save_u_to_u:1, save_lp_regs:1, save_blink:1,
38 res:4, save_nr_gpr_pairs:5;
39 #else
40 unsigned int save_nr_gpr_pairs:5, res:4,
41 save_blink:1, save_lp_regs:1, save_u_to_u:1,
42 res2:1, save_idx_regs:1, res3:18;
43 #endif
44 } ictrl;
45
46 *(unsigned int *)&ictrl = 0;
47
48 #ifndef CONFIG_ARC_IRQ_NO_AUTOSAVE
49 ictrl.save_nr_gpr_pairs = 6; /* r0 to r11 (r12 saved manually) */
50 ictrl.save_blink = 1;
51 ictrl.save_lp_regs = 1; /* LP_COUNT, LP_START, LP_END */
52 ictrl.save_u_to_u = 0; /* user ctxt saved on kernel stack */
53 ictrl.save_idx_regs = 1; /* JLI, LDI, EI */
54 #endif
55
56 WRITE_AUX(AUX_IRQ_CTRL, ictrl);
57
58 /*
59 * ARCv2 core intc provides multiple interrupt priorities (up to 16).
60 * Typical builds though have only two levels (0-high, 1-low)
61 * Linux by default uses lower prio 1 for most irqs, reserving 0 for
62 * NMI style interrupts in future (say perf)
63 */
64
65 READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
66
67 irq_prio = irq_bcr.prio; /* Encoded as N-1 for N levels */
68 pr_info("archs-intc\t: %d priority levels (default %d)%s\n",
69 irq_prio + 1, ARCV2_IRQ_DEF_PRIO,
70 irq_bcr.firq ? " FIRQ (not used)":"");
71
72 /*
73 * Set a default priority for all available interrupts to prevent
74 * switching of register banks if Fast IRQ and multiple register banks
75 * are supported by CPU.
76 * Also disable private-per-core IRQ lines so faulty external HW won't
77 * trigger interrupt that kernel is not ready to handle.
78 */
79 for (i = NR_EXCEPTIONS; i < irq_bcr.irqs + NR_EXCEPTIONS; i++) {
80 write_aux_reg(AUX_IRQ_SELECT, i);
81 write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
82
83 /*
84 * Only mask cpu private IRQs here.
85 * "common" interrupts are masked at IDU, otherwise it would
86 * need to be unmasked at each cpu, with IPIs
87 */
88 if (i < FIRST_EXT_IRQ)
89 write_aux_reg(AUX_IRQ_ENABLE, 0);
90 }
91
92 /* setup status32, don't enable intr yet as kernel doesn't want */
93 tmp = read_aux_reg(ARC_REG_STATUS32);
94 tmp |= ARCV2_IRQ_DEF_PRIO << 1;
95 tmp &= ~STATUS_IE_MASK;
96 asm volatile("kflag %0 \n"::"r"(tmp));
97 }
98
arcv2_irq_mask(struct irq_data * data)99 static void arcv2_irq_mask(struct irq_data *data)
100 {
101 write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
102 write_aux_reg(AUX_IRQ_ENABLE, 0);
103 }
104
arcv2_irq_unmask(struct irq_data * data)105 static void arcv2_irq_unmask(struct irq_data *data)
106 {
107 write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
108 write_aux_reg(AUX_IRQ_ENABLE, 1);
109 }
110
arcv2_irq_enable(struct irq_data * data)111 static void arcv2_irq_enable(struct irq_data *data)
112 {
113 /* set default priority */
114 write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
115 write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
116
117 /*
118 * hw auto enables (linux unmask) all by default
119 * So no need to do IRQ_ENABLE here
120 * XXX: However OSCI LAN need it
121 */
122 write_aux_reg(AUX_IRQ_ENABLE, 1);
123 }
124
125 static struct irq_chip arcv2_irq_chip = {
126 .name = "ARCv2 core Intc",
127 .irq_mask = arcv2_irq_mask,
128 .irq_unmask = arcv2_irq_unmask,
129 .irq_enable = arcv2_irq_enable
130 };
131
arcv2_irq_map(struct irq_domain * d,unsigned int irq,irq_hw_number_t hw)132 static int arcv2_irq_map(struct irq_domain *d, unsigned int irq,
133 irq_hw_number_t hw)
134 {
135 /*
136 * core intc IRQs [16, 23]:
137 * Statically assigned always private-per-core (Timers, WDT, IPI, PCT)
138 */
139 if (hw < FIRST_EXT_IRQ) {
140 /*
141 * A subsequent request_percpu_irq() fails if percpu_devid is
142 * not set. That in turns sets NOAUTOEN, meaning each core needs
143 * to call enable_percpu_irq()
144 */
145 irq_set_percpu_devid(irq);
146 irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq);
147 } else {
148 irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq);
149 }
150
151 return 0;
152 }
153
154 static const struct irq_domain_ops arcv2_irq_ops = {
155 .xlate = irq_domain_xlate_onecell,
156 .map = arcv2_irq_map,
157 };
158
159
160 static int __init
init_onchip_IRQ(struct device_node * intc,struct device_node * parent)161 init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
162 {
163 struct irq_domain *root_domain;
164 struct bcr_irq_arcv2 irq_bcr;
165 unsigned int nr_cpu_irqs;
166
167 READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
168 nr_cpu_irqs = irq_bcr.irqs + NR_EXCEPTIONS;
169
170 if (parent)
171 panic("DeviceTree incore intc not a root irq controller\n");
172
173 root_domain = irq_domain_add_linear(intc, nr_cpu_irqs, &arcv2_irq_ops, NULL);
174 if (!root_domain)
175 panic("root irq domain not avail\n");
176
177 /*
178 * Needed for primary domain lookup to succeed
179 * This is a primary irqchip, and can never have a parent
180 */
181 irq_set_default_host(root_domain);
182
183 #ifdef CONFIG_SMP
184 irq_create_mapping(root_domain, IPI_IRQ);
185 #endif
186 irq_create_mapping(root_domain, SOFTIRQ_IRQ);
187
188 return 0;
189 }
190
191 IRQCHIP_DECLARE(arc_intc, "snps,archs-intc", init_onchip_IRQ);
192