1 /*
2 * Linux ARCnet driver - "RIM I" (entirely mem-mapped) cards
3 *
4 * Written 1994-1999 by Avery Pennarun.
5 * Written 1999-2000 by Martin Mares <mj@ucw.cz>.
6 * Derived from skeleton.c by Donald Becker.
7 *
8 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
9 * for sponsoring the further development of this driver.
10 *
11 * **********************
12 *
13 * The original copyright of skeleton.c was as follows:
14 *
15 * skeleton.c Written 1993 by Donald Becker.
16 * Copyright 1993 United States Government as represented by the
17 * Director, National Security Agency. This software may only be used
18 * and distributed according to the terms of the GNU General Public License as
19 * modified by SRC, incorporated herein by reference.
20 *
21 * **********************
22 *
23 * For more details, see drivers/net/arcnet.c
24 *
25 * **********************
26 */
27
28 #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
29
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/moduleparam.h>
33 #include <linux/ioport.h>
34 #include <linux/delay.h>
35 #include <linux/netdevice.h>
36 #include <linux/memblock.h>
37 #include <linux/init.h>
38 #include <linux/interrupt.h>
39 #include <linux/io.h>
40
41 #include "arcdevice.h"
42 #include "com9026.h"
43
44 /* Internal function declarations */
45
46 static int arcrimi_probe(struct net_device *dev);
47 static int arcrimi_found(struct net_device *dev);
48 static void arcrimi_command(struct net_device *dev, int command);
49 static int arcrimi_status(struct net_device *dev);
50 static void arcrimi_setmask(struct net_device *dev, int mask);
51 static int arcrimi_reset(struct net_device *dev, int really_reset);
52 static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset,
53 void *buf, int count);
54 static void arcrimi_copy_from_card(struct net_device *dev, int bufnum,
55 int offset, void *buf, int count);
56
57 /* Handy defines for ARCnet specific stuff */
58
59 /* Amount of I/O memory used by the card */
60 #define BUFFER_SIZE (512)
61 #define MIRROR_SIZE (BUFFER_SIZE * 4)
62
63 /* We cannot probe for a RIM I card; one reason is I don't know how to reset
64 * them. In fact, we can't even get their node ID automatically. So, we
65 * need to be passed a specific shmem address, IRQ, and node ID.
66 */
arcrimi_probe(struct net_device * dev)67 static int __init arcrimi_probe(struct net_device *dev)
68 {
69 if (BUGLVL(D_NORMAL)) {
70 pr_info("%s\n", "RIM I (entirely mem-mapped) support");
71 pr_info("E-mail me if you actually test the RIM I driver, please!\n");
72 pr_info("Given: node %02Xh, shmem %lXh, irq %d\n",
73 dev->dev_addr[0], dev->mem_start, dev->irq);
74 }
75
76 if (dev->mem_start <= 0 || dev->irq <= 0) {
77 if (BUGLVL(D_NORMAL))
78 pr_err("No autoprobe for RIM I; you must specify the shmem and irq!\n");
79 return -ENODEV;
80 }
81 if (dev->dev_addr[0] == 0) {
82 if (BUGLVL(D_NORMAL))
83 pr_err("You need to specify your card's station ID!\n");
84 return -ENODEV;
85 }
86 /* Grab the memory region at mem_start for MIRROR_SIZE bytes.
87 * Later in arcrimi_found() the real size will be determined
88 * and this reserve will be released and the correct size
89 * will be taken.
90 */
91 if (!request_mem_region(dev->mem_start, MIRROR_SIZE, "arcnet (90xx)")) {
92 if (BUGLVL(D_NORMAL))
93 pr_notice("Card memory already allocated\n");
94 return -ENODEV;
95 }
96 return arcrimi_found(dev);
97 }
98
check_mirror(unsigned long addr,size_t size)99 static int check_mirror(unsigned long addr, size_t size)
100 {
101 void __iomem *p;
102 int res = -1;
103
104 if (!request_mem_region(addr, size, "arcnet (90xx)"))
105 return -1;
106
107 p = ioremap(addr, size);
108 if (p) {
109 if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue)
110 res = 1;
111 else
112 res = 0;
113 iounmap(p);
114 }
115
116 release_mem_region(addr, size);
117 return res;
118 }
119
120 /* Set up the struct net_device associated with this card.
121 * Called after probing succeeds.
122 */
arcrimi_found(struct net_device * dev)123 static int __init arcrimi_found(struct net_device *dev)
124 {
125 struct arcnet_local *lp;
126 unsigned long first_mirror, last_mirror, shmem;
127 void __iomem *p;
128 int mirror_size;
129 int err;
130
131 p = ioremap(dev->mem_start, MIRROR_SIZE);
132 if (!p) {
133 release_mem_region(dev->mem_start, MIRROR_SIZE);
134 arc_printk(D_NORMAL, dev, "Can't ioremap\n");
135 return -ENODEV;
136 }
137
138 /* reserve the irq */
139 if (request_irq(dev->irq, arcnet_interrupt, 0, "arcnet (RIM I)", dev)) {
140 iounmap(p);
141 release_mem_region(dev->mem_start, MIRROR_SIZE);
142 arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq);
143 return -ENODEV;
144 }
145
146 shmem = dev->mem_start;
147 arcnet_writeb(TESTvalue, p, COM9026_REG_W_INTMASK);
148 arcnet_writeb(TESTvalue, p, COM9026_REG_W_COMMAND);
149 /* actually the station/node ID */
150
151 /* find the real shared memory start/end points, including mirrors */
152
153 /* guess the actual size of one "memory mirror" - the number of
154 * bytes between copies of the shared memory. On most cards, it's
155 * 2k (or there are no mirrors at all) but on some, it's 4k.
156 */
157 mirror_size = MIRROR_SIZE;
158 if (arcnet_readb(p, COM9026_REG_R_STATUS) == TESTvalue &&
159 check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 &&
160 check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
161 mirror_size = 2 * MIRROR_SIZE;
162
163 first_mirror = shmem - mirror_size;
164 while (check_mirror(first_mirror, mirror_size) == 1)
165 first_mirror -= mirror_size;
166 first_mirror += mirror_size;
167
168 last_mirror = shmem + mirror_size;
169 while (check_mirror(last_mirror, mirror_size) == 1)
170 last_mirror += mirror_size;
171 last_mirror -= mirror_size;
172
173 dev->mem_start = first_mirror;
174 dev->mem_end = last_mirror + MIRROR_SIZE - 1;
175
176 /* initialize the rest of the device structure. */
177
178 lp = netdev_priv(dev);
179 lp->card_name = "RIM I";
180 lp->hw.command = arcrimi_command;
181 lp->hw.status = arcrimi_status;
182 lp->hw.intmask = arcrimi_setmask;
183 lp->hw.reset = arcrimi_reset;
184 lp->hw.owner = THIS_MODULE;
185 lp->hw.copy_to_card = arcrimi_copy_to_card;
186 lp->hw.copy_from_card = arcrimi_copy_from_card;
187
188 /* re-reserve the memory region - arcrimi_probe() alloced this reqion
189 * but didn't know the real size. Free that region and then re-get
190 * with the correct size. There is a VERY slim chance this could
191 * fail.
192 */
193 iounmap(p);
194 release_mem_region(shmem, MIRROR_SIZE);
195 if (!request_mem_region(dev->mem_start,
196 dev->mem_end - dev->mem_start + 1,
197 "arcnet (90xx)")) {
198 arc_printk(D_NORMAL, dev, "Card memory already allocated\n");
199 goto err_free_irq;
200 }
201
202 lp->mem_start = ioremap(dev->mem_start,
203 dev->mem_end - dev->mem_start + 1);
204 if (!lp->mem_start) {
205 arc_printk(D_NORMAL, dev, "Can't remap device memory!\n");
206 goto err_release_mem;
207 }
208
209 /* get and check the station ID from offset 1 in shmem */
210 arcnet_set_addr(dev, arcnet_readb(lp->mem_start,
211 COM9026_REG_R_STATION));
212
213 arc_printk(D_NORMAL, dev, "ARCnet RIM I: station %02Xh found at IRQ %d, ShMem %lXh (%ld*%d bytes)\n",
214 dev->dev_addr[0],
215 dev->irq, dev->mem_start,
216 (dev->mem_end - dev->mem_start + 1) / mirror_size,
217 mirror_size);
218
219 err = register_netdev(dev);
220 if (err)
221 goto err_unmap;
222
223 return 0;
224
225 err_unmap:
226 iounmap(lp->mem_start);
227 err_release_mem:
228 release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1);
229 err_free_irq:
230 free_irq(dev->irq, dev);
231 return -EIO;
232 }
233
234 /* Do a hardware reset on the card, and set up necessary registers.
235 *
236 * This should be called as little as possible, because it disrupts the
237 * token on the network (causes a RECON) and requires a significant delay.
238 *
239 * However, it does make sure the card is in a defined state.
240 */
arcrimi_reset(struct net_device * dev,int really_reset)241 static int arcrimi_reset(struct net_device *dev, int really_reset)
242 {
243 struct arcnet_local *lp = netdev_priv(dev);
244 void __iomem *ioaddr = lp->mem_start + 0x800;
245
246 arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
247 dev->name, arcnet_readb(ioaddr, COM9026_REG_R_STATUS));
248
249 if (really_reset) {
250 arcnet_writeb(TESTvalue, ioaddr, -0x800); /* fake reset */
251 return 0;
252 }
253 /* clear flags & end reset */
254 arcnet_writeb(CFLAGScmd | RESETclear, ioaddr, COM9026_REG_W_COMMAND);
255 arcnet_writeb(CFLAGScmd | CONFIGclear, ioaddr, COM9026_REG_W_COMMAND);
256
257 /* enable extended (512-byte) packets */
258 arcnet_writeb(CONFIGcmd | EXTconf, ioaddr, COM9026_REG_W_COMMAND);
259
260 /* done! return success. */
261 return 0;
262 }
263
arcrimi_setmask(struct net_device * dev,int mask)264 static void arcrimi_setmask(struct net_device *dev, int mask)
265 {
266 struct arcnet_local *lp = netdev_priv(dev);
267 void __iomem *ioaddr = lp->mem_start + 0x800;
268
269 arcnet_writeb(mask, ioaddr, COM9026_REG_W_INTMASK);
270 }
271
arcrimi_status(struct net_device * dev)272 static int arcrimi_status(struct net_device *dev)
273 {
274 struct arcnet_local *lp = netdev_priv(dev);
275 void __iomem *ioaddr = lp->mem_start + 0x800;
276
277 return arcnet_readb(ioaddr, COM9026_REG_R_STATUS);
278 }
279
arcrimi_command(struct net_device * dev,int cmd)280 static void arcrimi_command(struct net_device *dev, int cmd)
281 {
282 struct arcnet_local *lp = netdev_priv(dev);
283 void __iomem *ioaddr = lp->mem_start + 0x800;
284
285 arcnet_writeb(cmd, ioaddr, COM9026_REG_W_COMMAND);
286 }
287
arcrimi_copy_to_card(struct net_device * dev,int bufnum,int offset,void * buf,int count)288 static void arcrimi_copy_to_card(struct net_device *dev, int bufnum, int offset,
289 void *buf, int count)
290 {
291 struct arcnet_local *lp = netdev_priv(dev);
292 void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset;
293
294 TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count));
295 }
296
arcrimi_copy_from_card(struct net_device * dev,int bufnum,int offset,void * buf,int count)297 static void arcrimi_copy_from_card(struct net_device *dev, int bufnum,
298 int offset, void *buf, int count)
299 {
300 struct arcnet_local *lp = netdev_priv(dev);
301 void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset;
302
303 TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count));
304 }
305
306 static int node;
307 static int io; /* use the insmod io= irq= node= options */
308 static int irq;
309 static char device[9]; /* use eg. device=arc1 to change name */
310
311 module_param(node, int, 0);
312 module_param(io, int, 0);
313 module_param(irq, int, 0);
314 module_param_string(device, device, sizeof(device), 0);
315 MODULE_DESCRIPTION("ARCnet COM90xx RIM I chipset driver");
316 MODULE_LICENSE("GPL");
317
318 static struct net_device *my_dev;
319
arc_rimi_init(void)320 static int __init arc_rimi_init(void)
321 {
322 struct net_device *dev;
323
324 dev = alloc_arcdev(device);
325 if (!dev)
326 return -ENOMEM;
327
328 if (node && node != 0xff)
329 arcnet_set_addr(dev, node);
330
331 dev->mem_start = io;
332 dev->irq = irq;
333 if (dev->irq == 2)
334 dev->irq = 9;
335
336 if (arcrimi_probe(dev)) {
337 free_arcdev(dev);
338 return -EIO;
339 }
340
341 my_dev = dev;
342 return 0;
343 }
344
arc_rimi_exit(void)345 static void __exit arc_rimi_exit(void)
346 {
347 struct net_device *dev = my_dev;
348 struct arcnet_local *lp = netdev_priv(dev);
349
350 unregister_netdev(dev);
351 iounmap(lp->mem_start);
352 release_mem_region(dev->mem_start, dev->mem_end - dev->mem_start + 1);
353 free_irq(dev->irq, dev);
354 free_arcdev(dev);
355 }
356
357 #ifndef MODULE
arcrimi_setup(char * s)358 static int __init arcrimi_setup(char *s)
359 {
360 int ints[8];
361
362 s = get_options(s, 8, ints);
363 if (!ints[0])
364 return 1;
365 switch (ints[0]) {
366 default: /* ERROR */
367 pr_err("Too many arguments\n");
368 fallthrough;
369 case 3: /* Node ID */
370 node = ints[3];
371 fallthrough;
372 case 2: /* IRQ */
373 irq = ints[2];
374 fallthrough;
375 case 1: /* IO address */
376 io = ints[1];
377 }
378 if (*s)
379 snprintf(device, sizeof(device), "%s", s);
380 return 1;
381 }
382 __setup("arcrimi=", arcrimi_setup);
383 #endif /* MODULE */
384
385 module_init(arc_rimi_init)
386 module_exit(arc_rimi_exit)
387