xref: /linux/drivers/media/dvb-frontends/tda1004x.h (revision 58e16d792a6a8c6b750f637a4649967fcac853dc)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2   /*
3      Driver for Philips tda1004xh OFDM Frontend
4 
5      (c) 2004 Andrew de Quincey
6 
7 
8    */
9 
10 #ifndef TDA1004X_H
11 #define TDA1004X_H
12 
13 #include <linux/dvb/frontend.h>
14 #include <linux/firmware.h>
15 
16 enum tda10046_xtal {
17 	TDA10046_XTAL_4M,
18 	TDA10046_XTAL_16M,
19 };
20 
21 enum tda10046_agc {
22 	TDA10046_AGC_DEFAULT,		/* original configuration */
23 	TDA10046_AGC_IFO_AUTO_NEG,	/* IF AGC only, automatic, negative */
24 	TDA10046_AGC_IFO_AUTO_POS,	/* IF AGC only, automatic, positive */
25 	TDA10046_AGC_TDA827X,		/* IF AGC only, special setup for tda827x */
26 };
27 
28 /* Many (hybrid) boards use GPIO 1 and 3
29 	GPIO1	analog - dvb switch
30 	GPIO3	firmware eeprom address switch
31 */
32 enum tda10046_gpio {
33 	TDA10046_GPTRI  = 0x00,		/* All GPIOs tristate */
34 	TDA10046_GP00   = 0x40,		/* GPIO3=0, GPIO1=0 */
35 	TDA10046_GP01   = 0x42,		/* GPIO3=0, GPIO1=1 */
36 	TDA10046_GP10   = 0x48,		/* GPIO3=1, GPIO1=0 */
37 	TDA10046_GP11   = 0x4a,		/* GPIO3=1, GPIO1=1 */
38 	TDA10046_GP00_I = 0x80,		/* GPIO3=0, GPIO1=0, invert in sleep mode*/
39 	TDA10046_GP01_I = 0x82,		/* GPIO3=0, GPIO1=1, invert in sleep mode */
40 	TDA10046_GP10_I = 0x88,		/* GPIO3=1, GPIO1=0, invert in sleep mode */
41 	TDA10046_GP11_I = 0x8a,		/* GPIO3=1, GPIO1=1, invert in sleep mode */
42 };
43 
44 enum tda10046_if {
45 	TDA10046_FREQ_3617,		/* original config, 36,166 MHZ */
46 	TDA10046_FREQ_3613,		/* 36,13 MHZ */
47 	TDA10046_FREQ_045,		/* low IF, 4.0, 4.5, or 5.0 MHZ */
48 	TDA10046_FREQ_052,		/* low IF, 5.1667 MHZ for tda9889 */
49 };
50 
51 enum tda10046_tsout {
52 	TDA10046_TS_PARALLEL  = 0x00,	/* parallel transport stream, default */
53 	TDA10046_TS_SERIAL    = 0x01,	/* serial transport stream */
54 };
55 
56 struct tda1004x_config
57 {
58 	/* the demodulator's i2c address */
59 	u8 demod_address;
60 
61 	/* does the "inversion" need inverted? */
62 	u8 invert;
63 
64 	/* Does the OCLK signal need inverted? */
65 	u8 invert_oclk;
66 
67 	/* parallel or serial transport stream */
68 	enum tda10046_tsout ts_mode;
69 
70 	/* Xtal frequency, 4 or 16MHz*/
71 	enum tda10046_xtal xtal_freq;
72 
73 	/* IF frequency */
74 	enum tda10046_if if_freq;
75 
76 	/* AGC configuration */
77 	enum tda10046_agc agc_config;
78 
79 	/* setting of GPIO1 and 3 */
80 	enum tda10046_gpio gpio_config;
81 
82 	/* slave address and configuration of the tuner */
83 	u8 tuner_address;
84 	u8 antenna_switch;
85 
86 	/* if the board uses another I2c Bridge (tda8290), its address */
87 	u8 i2c_gate;
88 
89 	/* request firmware for device */
90 	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
91 };
92 
93 enum tda1004x_demod {
94 	TDA1004X_DEMOD_TDA10045,
95 	TDA1004X_DEMOD_TDA10046,
96 };
97 
98 struct tda1004x_state {
99 	struct i2c_adapter* i2c;
100 	const struct tda1004x_config* config;
101 	struct dvb_frontend frontend;
102 
103 	/* private demod data */
104 	enum tda1004x_demod demod_type;
105 };
106 
107 #if IS_REACHABLE(CONFIG_DVB_TDA1004X)
108 extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
109 					    struct i2c_adapter* i2c);
110 
111 extern struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
112 					    struct i2c_adapter* i2c);
113 #else
tda10045_attach(const struct tda1004x_config * config,struct i2c_adapter * i2c)114 static inline struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
115 					    struct i2c_adapter* i2c)
116 {
117 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
118 	return NULL;
119 }
tda10046_attach(const struct tda1004x_config * config,struct i2c_adapter * i2c)120 static inline struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
121 					    struct i2c_adapter* i2c)
122 {
123 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
124 	return NULL;
125 }
126 #endif // CONFIG_DVB_TDA1004X
127 
tda1004x_writereg(struct dvb_frontend * fe,u8 reg,u8 val)128 static inline int tda1004x_writereg(struct dvb_frontend *fe, u8 reg, u8 val) {
129 	int r = 0;
130 	u8 buf[] = {reg, val};
131 	if (fe->ops.write)
132 		r = fe->ops.write(fe, buf, 2);
133 	return r;
134 }
135 
136 #endif // TDA1004X_H
137