1 /* SPDX-License-Identifier: ISC */
2 /*
3 * Copyright (c) 2005-2011 Atheros Communications Inc.
4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
6 * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
7 */
8
9 #ifndef _WMI_H_
10 #define _WMI_H_
11
12 #include <linux/types.h>
13 #include <linux/ieee80211.h>
14
15 /*
16 * This file specifies the WMI interface for the Unified Software
17 * Architecture.
18 *
19 * It includes definitions of all the commands and events. Commands are
20 * messages from the host to the target. Events and Replies are messages
21 * from the target to the host.
22 *
23 * Ownership of correctness in regards to WMI commands belongs to the host
24 * driver and the target is not required to validate parameters for value,
25 * proper range, or any other checking.
26 *
27 * Guidelines for extending this interface are below.
28 *
29 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
30 *
31 * 2. Use ONLY u32 type for defining member variables within WMI
32 * command/event structures. Do not use u8, u16, bool or
33 * enum types within these structures.
34 *
35 * 3. DO NOT define bit fields within structures. Implement bit fields
36 * using masks if necessary. Do not use the programming language's bit
37 * field definition.
38 *
39 * 4. Define macros for encode/decode of u8, u16 fields within
40 * the u32 variables. Use these macros for set/get of these fields.
41 * Try to use this to optimize the structure without bloating it with
42 * u32 variables for every lower sized field.
43 *
44 * 5. Do not use PACK/UNPACK attributes for the structures as each member
45 * variable is already 4-byte aligned by virtue of being a u32
46 * type.
47 *
48 * 6. Comment each parameter part of the WMI command/event structure by
49 * using the 2 stars at the beginning of C comment instead of one star to
50 * enable HTML document generation using Doxygen.
51 *
52 */
53
54 /* Control Path */
55 struct wmi_cmd_hdr {
56 __le32 cmd_id;
57 } __packed;
58
59 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF
60 #define WMI_CMD_HDR_CMD_ID_LSB 0
61 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
62 #define WMI_CMD_HDR_PLT_PRIV_LSB 24
63
64 #define HTC_PROTOCOL_VERSION 0x0002
65 #define WMI_PROTOCOL_VERSION 0x0002
66
67 /*
68 * There is no signed version of __le32, so for a temporary solution come
69 * up with our own version. The idea is from fs/ntfs/endian.h.
70 *
71 * Use a_ prefix so that it doesn't conflict if we get proper support to
72 * linux/types.h.
73 */
74 typedef __s32 __bitwise a_sle32;
75
a_cpu_to_sle32(s32 val)76 static inline a_sle32 a_cpu_to_sle32(s32 val)
77 {
78 return (__force a_sle32)cpu_to_le32(val);
79 }
80
a_sle32_to_cpu(a_sle32 val)81 static inline s32 a_sle32_to_cpu(a_sle32 val)
82 {
83 return le32_to_cpu((__force __le32)val);
84 }
85
86 enum wmi_service {
87 WMI_SERVICE_BEACON_OFFLOAD = 0,
88 WMI_SERVICE_SCAN_OFFLOAD,
89 WMI_SERVICE_ROAM_OFFLOAD,
90 WMI_SERVICE_BCN_MISS_OFFLOAD,
91 WMI_SERVICE_STA_PWRSAVE,
92 WMI_SERVICE_STA_ADVANCED_PWRSAVE,
93 WMI_SERVICE_AP_UAPSD,
94 WMI_SERVICE_AP_DFS,
95 WMI_SERVICE_11AC,
96 WMI_SERVICE_BLOCKACK,
97 WMI_SERVICE_PHYERR,
98 WMI_SERVICE_BCN_FILTER,
99 WMI_SERVICE_RTT,
100 WMI_SERVICE_RATECTRL,
101 WMI_SERVICE_WOW,
102 WMI_SERVICE_RATECTRL_CACHE,
103 WMI_SERVICE_IRAM_TIDS,
104 WMI_SERVICE_ARPNS_OFFLOAD,
105 WMI_SERVICE_NLO,
106 WMI_SERVICE_GTK_OFFLOAD,
107 WMI_SERVICE_SCAN_SCH,
108 WMI_SERVICE_CSA_OFFLOAD,
109 WMI_SERVICE_CHATTER,
110 WMI_SERVICE_COEX_FREQAVOID,
111 WMI_SERVICE_PACKET_POWER_SAVE,
112 WMI_SERVICE_FORCE_FW_HANG,
113 WMI_SERVICE_GPIO,
114 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
115 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
116 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
117 WMI_SERVICE_STA_KEEP_ALIVE,
118 WMI_SERVICE_TX_ENCAP,
119 WMI_SERVICE_BURST,
120 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
121 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
122 WMI_SERVICE_ROAM_SCAN_OFFLOAD,
123 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
124 WMI_SERVICE_EARLY_RX,
125 WMI_SERVICE_STA_SMPS,
126 WMI_SERVICE_FWTEST,
127 WMI_SERVICE_STA_WMMAC,
128 WMI_SERVICE_TDLS,
129 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
130 WMI_SERVICE_ADAPTIVE_OCS,
131 WMI_SERVICE_BA_SSN_SUPPORT,
132 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
133 WMI_SERVICE_WLAN_HB,
134 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
135 WMI_SERVICE_BATCH_SCAN,
136 WMI_SERVICE_QPOWER,
137 WMI_SERVICE_PLMREQ,
138 WMI_SERVICE_THERMAL_MGMT,
139 WMI_SERVICE_RMC,
140 WMI_SERVICE_MHF_OFFLOAD,
141 WMI_SERVICE_COEX_SAR,
142 WMI_SERVICE_BCN_TXRATE_OVERRIDE,
143 WMI_SERVICE_NAN,
144 WMI_SERVICE_L1SS_STAT,
145 WMI_SERVICE_ESTIMATE_LINKSPEED,
146 WMI_SERVICE_OBSS_SCAN,
147 WMI_SERVICE_TDLS_OFFCHAN,
148 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
149 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
150 WMI_SERVICE_IBSS_PWRSAVE,
151 WMI_SERVICE_LPASS,
152 WMI_SERVICE_EXTSCAN,
153 WMI_SERVICE_D0WOW,
154 WMI_SERVICE_HSOFFLOAD,
155 WMI_SERVICE_ROAM_HO_OFFLOAD,
156 WMI_SERVICE_RX_FULL_REORDER,
157 WMI_SERVICE_DHCP_OFFLOAD,
158 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
159 WMI_SERVICE_MDNS_OFFLOAD,
160 WMI_SERVICE_SAP_AUTH_OFFLOAD,
161 WMI_SERVICE_ATF,
162 WMI_SERVICE_COEX_GPIO,
163 WMI_SERVICE_ENHANCED_PROXY_STA,
164 WMI_SERVICE_TT,
165 WMI_SERVICE_PEER_CACHING,
166 WMI_SERVICE_AUX_SPECTRAL_INTF,
167 WMI_SERVICE_AUX_CHAN_LOAD_INTF,
168 WMI_SERVICE_BSS_CHANNEL_INFO_64,
169 WMI_SERVICE_EXT_RES_CFG_SUPPORT,
170 WMI_SERVICE_MESH_11S,
171 WMI_SERVICE_MESH_NON_11S,
172 WMI_SERVICE_PEER_STATS,
173 WMI_SERVICE_RESTRT_CHNL_SUPPORT,
174 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
175 WMI_SERVICE_TX_MODE_PUSH_ONLY,
176 WMI_SERVICE_TX_MODE_PUSH_PULL,
177 WMI_SERVICE_TX_MODE_DYNAMIC,
178 WMI_SERVICE_VDEV_RX_FILTER,
179 WMI_SERVICE_BTCOEX,
180 WMI_SERVICE_CHECK_CAL_VERSION,
181 WMI_SERVICE_DBGLOG_WARN2,
182 WMI_SERVICE_BTCOEX_DUTY_CYCLE,
183 WMI_SERVICE_4_WIRE_COEX_SUPPORT,
184 WMI_SERVICE_EXTENDED_NSS_SUPPORT,
185 WMI_SERVICE_PROG_GPIO_BAND_SELECT,
186 WMI_SERVICE_SMART_LOGGING_SUPPORT,
187 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
188 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
189 WMI_SERVICE_MGMT_TX_WMI,
190 WMI_SERVICE_TDLS_WIDER_BANDWIDTH,
191 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
192 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,
193 WMI_SERVICE_TPC_STATS_FINAL,
194 WMI_SERVICE_RESET_CHIP,
195 WMI_SERVICE_SPOOF_MAC_SUPPORT,
196 WMI_SERVICE_TX_DATA_ACK_RSSI,
197 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
198 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
199 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,
200 WMI_SERVICE_THERM_THROT,
201 WMI_SERVICE_RTT_RESPONDER_ROLE,
202 WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
203 WMI_SERVICE_REPORT_AIRTIME,
204 WMI_SERVICE_SYNC_DELETE_CMDS,
205 WMI_SERVICE_TX_PWR_PER_PEER,
206 WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
207 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
208 WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
209
210 /* Remember to add the new value to wmi_service_name()! */
211
212 /* keep last */
213 WMI_SERVICE_MAX,
214 };
215
216 enum wmi_10x_service {
217 WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
218 WMI_10X_SERVICE_SCAN_OFFLOAD,
219 WMI_10X_SERVICE_ROAM_OFFLOAD,
220 WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
221 WMI_10X_SERVICE_STA_PWRSAVE,
222 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
223 WMI_10X_SERVICE_AP_UAPSD,
224 WMI_10X_SERVICE_AP_DFS,
225 WMI_10X_SERVICE_11AC,
226 WMI_10X_SERVICE_BLOCKACK,
227 WMI_10X_SERVICE_PHYERR,
228 WMI_10X_SERVICE_BCN_FILTER,
229 WMI_10X_SERVICE_RTT,
230 WMI_10X_SERVICE_RATECTRL,
231 WMI_10X_SERVICE_WOW,
232 WMI_10X_SERVICE_RATECTRL_CACHE,
233 WMI_10X_SERVICE_IRAM_TIDS,
234 WMI_10X_SERVICE_BURST,
235
236 /* introduced in 10.2 */
237 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
238 WMI_10X_SERVICE_FORCE_FW_HANG,
239 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
240 WMI_10X_SERVICE_ATF,
241 WMI_10X_SERVICE_COEX_GPIO,
242 WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
243 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
244 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
245 WMI_10X_SERVICE_MESH,
246 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
247 WMI_10X_SERVICE_PEER_STATS,
248 WMI_10X_SERVICE_RESET_CHIP,
249 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
250 WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,
251 WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
252 WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
253 };
254
255 enum wmi_main_service {
256 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
257 WMI_MAIN_SERVICE_SCAN_OFFLOAD,
258 WMI_MAIN_SERVICE_ROAM_OFFLOAD,
259 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
260 WMI_MAIN_SERVICE_STA_PWRSAVE,
261 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
262 WMI_MAIN_SERVICE_AP_UAPSD,
263 WMI_MAIN_SERVICE_AP_DFS,
264 WMI_MAIN_SERVICE_11AC,
265 WMI_MAIN_SERVICE_BLOCKACK,
266 WMI_MAIN_SERVICE_PHYERR,
267 WMI_MAIN_SERVICE_BCN_FILTER,
268 WMI_MAIN_SERVICE_RTT,
269 WMI_MAIN_SERVICE_RATECTRL,
270 WMI_MAIN_SERVICE_WOW,
271 WMI_MAIN_SERVICE_RATECTRL_CACHE,
272 WMI_MAIN_SERVICE_IRAM_TIDS,
273 WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
274 WMI_MAIN_SERVICE_NLO,
275 WMI_MAIN_SERVICE_GTK_OFFLOAD,
276 WMI_MAIN_SERVICE_SCAN_SCH,
277 WMI_MAIN_SERVICE_CSA_OFFLOAD,
278 WMI_MAIN_SERVICE_CHATTER,
279 WMI_MAIN_SERVICE_COEX_FREQAVOID,
280 WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
281 WMI_MAIN_SERVICE_FORCE_FW_HANG,
282 WMI_MAIN_SERVICE_GPIO,
283 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
284 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
285 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
286 WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
287 WMI_MAIN_SERVICE_TX_ENCAP,
288 };
289
290 enum wmi_10_4_service {
291 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
292 WMI_10_4_SERVICE_SCAN_OFFLOAD,
293 WMI_10_4_SERVICE_ROAM_OFFLOAD,
294 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
295 WMI_10_4_SERVICE_STA_PWRSAVE,
296 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
297 WMI_10_4_SERVICE_AP_UAPSD,
298 WMI_10_4_SERVICE_AP_DFS,
299 WMI_10_4_SERVICE_11AC,
300 WMI_10_4_SERVICE_BLOCKACK,
301 WMI_10_4_SERVICE_PHYERR,
302 WMI_10_4_SERVICE_BCN_FILTER,
303 WMI_10_4_SERVICE_RTT,
304 WMI_10_4_SERVICE_RATECTRL,
305 WMI_10_4_SERVICE_WOW,
306 WMI_10_4_SERVICE_RATECTRL_CACHE,
307 WMI_10_4_SERVICE_IRAM_TIDS,
308 WMI_10_4_SERVICE_BURST,
309 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
310 WMI_10_4_SERVICE_GTK_OFFLOAD,
311 WMI_10_4_SERVICE_SCAN_SCH,
312 WMI_10_4_SERVICE_CSA_OFFLOAD,
313 WMI_10_4_SERVICE_CHATTER,
314 WMI_10_4_SERVICE_COEX_FREQAVOID,
315 WMI_10_4_SERVICE_PACKET_POWER_SAVE,
316 WMI_10_4_SERVICE_FORCE_FW_HANG,
317 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
318 WMI_10_4_SERVICE_GPIO,
319 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
320 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
321 WMI_10_4_SERVICE_STA_KEEP_ALIVE,
322 WMI_10_4_SERVICE_TX_ENCAP,
323 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
324 WMI_10_4_SERVICE_EARLY_RX,
325 WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
326 WMI_10_4_SERVICE_TT,
327 WMI_10_4_SERVICE_ATF,
328 WMI_10_4_SERVICE_PEER_CACHING,
329 WMI_10_4_SERVICE_COEX_GPIO,
330 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
331 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
332 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
333 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
334 WMI_10_4_SERVICE_MESH_NON_11S,
335 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
336 WMI_10_4_SERVICE_PEER_STATS,
337 WMI_10_4_SERVICE_MESH_11S,
338 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
339 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
340 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
341 WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
342 WMI_10_4_SERVICE_VDEV_RX_FILTER,
343 WMI_10_4_SERVICE_BTCOEX,
344 WMI_10_4_SERVICE_CHECK_CAL_VERSION,
345 WMI_10_4_SERVICE_DBGLOG_WARN2,
346 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
347 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
348 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
349 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
350 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
351 WMI_10_4_SERVICE_TDLS,
352 WMI_10_4_SERVICE_TDLS_OFFCHAN,
353 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
354 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
355 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
356 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
357 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
358 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
359 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
360 WMI_10_4_SERVICE_TPC_STATS_FINAL,
361 WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
362 WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
363 WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,
364 WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
365 WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
366 WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
367 WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
368 WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,
369 WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,
370 WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
371 WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,
372 WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,
373 WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
374 WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
375 WMI_10_4_SERVICE_REPORT_AIRTIME,
376 WMI_10_4_SERVICE_TX_PWR_PER_PEER,
377 WMI_10_4_SERVICE_FETCH_PEER_TX_PN,
378 WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,
379 WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,
380 WMI_10_4_SERVICE_QINQ_SUPPORT,
381 WMI_10_4_SERVICE_RESET_CHIP,
382 };
383
wmi_service_name(enum wmi_service service_id)384 static inline char *wmi_service_name(enum wmi_service service_id)
385 {
386 #define SVCSTR(x) case x: return #x
387
388 switch (service_id) {
389 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
390 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
391 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
392 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
393 SVCSTR(WMI_SERVICE_STA_PWRSAVE);
394 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
395 SVCSTR(WMI_SERVICE_AP_UAPSD);
396 SVCSTR(WMI_SERVICE_AP_DFS);
397 SVCSTR(WMI_SERVICE_11AC);
398 SVCSTR(WMI_SERVICE_BLOCKACK);
399 SVCSTR(WMI_SERVICE_PHYERR);
400 SVCSTR(WMI_SERVICE_BCN_FILTER);
401 SVCSTR(WMI_SERVICE_RTT);
402 SVCSTR(WMI_SERVICE_RATECTRL);
403 SVCSTR(WMI_SERVICE_WOW);
404 SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
405 SVCSTR(WMI_SERVICE_IRAM_TIDS);
406 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
407 SVCSTR(WMI_SERVICE_NLO);
408 SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
409 SVCSTR(WMI_SERVICE_SCAN_SCH);
410 SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
411 SVCSTR(WMI_SERVICE_CHATTER);
412 SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
413 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
414 SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
415 SVCSTR(WMI_SERVICE_GPIO);
416 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
417 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
418 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
419 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
420 SVCSTR(WMI_SERVICE_TX_ENCAP);
421 SVCSTR(WMI_SERVICE_BURST);
422 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
423 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
424 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
425 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
426 SVCSTR(WMI_SERVICE_EARLY_RX);
427 SVCSTR(WMI_SERVICE_STA_SMPS);
428 SVCSTR(WMI_SERVICE_FWTEST);
429 SVCSTR(WMI_SERVICE_STA_WMMAC);
430 SVCSTR(WMI_SERVICE_TDLS);
431 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
432 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
433 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
434 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
435 SVCSTR(WMI_SERVICE_WLAN_HB);
436 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
437 SVCSTR(WMI_SERVICE_BATCH_SCAN);
438 SVCSTR(WMI_SERVICE_QPOWER);
439 SVCSTR(WMI_SERVICE_PLMREQ);
440 SVCSTR(WMI_SERVICE_THERMAL_MGMT);
441 SVCSTR(WMI_SERVICE_RMC);
442 SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
443 SVCSTR(WMI_SERVICE_COEX_SAR);
444 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
445 SVCSTR(WMI_SERVICE_NAN);
446 SVCSTR(WMI_SERVICE_L1SS_STAT);
447 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
448 SVCSTR(WMI_SERVICE_OBSS_SCAN);
449 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
450 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
451 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
452 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
453 SVCSTR(WMI_SERVICE_LPASS);
454 SVCSTR(WMI_SERVICE_EXTSCAN);
455 SVCSTR(WMI_SERVICE_D0WOW);
456 SVCSTR(WMI_SERVICE_HSOFFLOAD);
457 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
458 SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
459 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
460 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
461 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
462 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
463 SVCSTR(WMI_SERVICE_ATF);
464 SVCSTR(WMI_SERVICE_COEX_GPIO);
465 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
466 SVCSTR(WMI_SERVICE_TT);
467 SVCSTR(WMI_SERVICE_PEER_CACHING);
468 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
469 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
470 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
471 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
472 SVCSTR(WMI_SERVICE_MESH_11S);
473 SVCSTR(WMI_SERVICE_MESH_NON_11S);
474 SVCSTR(WMI_SERVICE_PEER_STATS);
475 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
476 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
477 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
478 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
479 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
480 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
481 SVCSTR(WMI_SERVICE_BTCOEX);
482 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
483 SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
484 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
485 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
486 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
487 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
488 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
489 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
490 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
491 SVCSTR(WMI_SERVICE_MGMT_TX_WMI);
492 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);
493 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);
494 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
495 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
496 SVCSTR(WMI_SERVICE_RESET_CHIP);
497 SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);
498 SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
499 SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
500 SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);
501 SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);
502 SVCSTR(WMI_SERVICE_THERM_THROT);
503 SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
504 SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
505 SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
506 SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
507 SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
508 SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
509 SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
510 SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
511
512 case WMI_SERVICE_MAX:
513 return NULL;
514 }
515
516 #undef SVCSTR
517
518 return NULL;
519 }
520
521 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
522 ((svc_id) < (len) && \
523 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
524 BIT((svc_id) % (sizeof(u32))))
525
526 /* This extension is required to accommodate new services, current limit
527 * for wmi_services is 64 as target is using only 4-bits of each 32-bit
528 * wmi_service word. Extending this to make use of remaining unused bits
529 * for new services.
530 */
531 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
532 ((svc_id) >= (len) && \
533 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
534 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
535
536 #define SVCMAP(x, y, len) \
537 do { \
538 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
539 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
540 __set_bit(y, out); \
541 } while (0)
542
wmi_10x_svc_map(const __le32 * in,unsigned long * out,size_t len)543 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
544 size_t len)
545 {
546 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
547 WMI_SERVICE_BEACON_OFFLOAD, len);
548 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
549 WMI_SERVICE_SCAN_OFFLOAD, len);
550 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
551 WMI_SERVICE_ROAM_OFFLOAD, len);
552 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
553 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
554 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
555 WMI_SERVICE_STA_PWRSAVE, len);
556 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
557 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
558 SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
559 WMI_SERVICE_AP_UAPSD, len);
560 SVCMAP(WMI_10X_SERVICE_AP_DFS,
561 WMI_SERVICE_AP_DFS, len);
562 SVCMAP(WMI_10X_SERVICE_11AC,
563 WMI_SERVICE_11AC, len);
564 SVCMAP(WMI_10X_SERVICE_BLOCKACK,
565 WMI_SERVICE_BLOCKACK, len);
566 SVCMAP(WMI_10X_SERVICE_PHYERR,
567 WMI_SERVICE_PHYERR, len);
568 SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
569 WMI_SERVICE_BCN_FILTER, len);
570 SVCMAP(WMI_10X_SERVICE_RTT,
571 WMI_SERVICE_RTT, len);
572 SVCMAP(WMI_10X_SERVICE_RATECTRL,
573 WMI_SERVICE_RATECTRL, len);
574 SVCMAP(WMI_10X_SERVICE_WOW,
575 WMI_SERVICE_WOW, len);
576 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
577 WMI_SERVICE_RATECTRL_CACHE, len);
578 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
579 WMI_SERVICE_IRAM_TIDS, len);
580 SVCMAP(WMI_10X_SERVICE_BURST,
581 WMI_SERVICE_BURST, len);
582 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
583 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
584 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
585 WMI_SERVICE_FORCE_FW_HANG, len);
586 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
587 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
588 SVCMAP(WMI_10X_SERVICE_ATF,
589 WMI_SERVICE_ATF, len);
590 SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
591 WMI_SERVICE_COEX_GPIO, len);
592 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
593 WMI_SERVICE_AUX_SPECTRAL_INTF, len);
594 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
595 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
596 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
597 WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
598 SVCMAP(WMI_10X_SERVICE_MESH,
599 WMI_SERVICE_MESH_11S, len);
600 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
601 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
602 SVCMAP(WMI_10X_SERVICE_PEER_STATS,
603 WMI_SERVICE_PEER_STATS, len);
604 SVCMAP(WMI_10X_SERVICE_RESET_CHIP,
605 WMI_SERVICE_RESET_CHIP, len);
606 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
607 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
608 SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
609 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);
610 SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
611 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
612 }
613
wmi_main_svc_map(const __le32 * in,unsigned long * out,size_t len)614 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
615 size_t len)
616 {
617 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
618 WMI_SERVICE_BEACON_OFFLOAD, len);
619 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
620 WMI_SERVICE_SCAN_OFFLOAD, len);
621 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
622 WMI_SERVICE_ROAM_OFFLOAD, len);
623 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
624 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
625 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
626 WMI_SERVICE_STA_PWRSAVE, len);
627 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
628 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
629 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
630 WMI_SERVICE_AP_UAPSD, len);
631 SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
632 WMI_SERVICE_AP_DFS, len);
633 SVCMAP(WMI_MAIN_SERVICE_11AC,
634 WMI_SERVICE_11AC, len);
635 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
636 WMI_SERVICE_BLOCKACK, len);
637 SVCMAP(WMI_MAIN_SERVICE_PHYERR,
638 WMI_SERVICE_PHYERR, len);
639 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
640 WMI_SERVICE_BCN_FILTER, len);
641 SVCMAP(WMI_MAIN_SERVICE_RTT,
642 WMI_SERVICE_RTT, len);
643 SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
644 WMI_SERVICE_RATECTRL, len);
645 SVCMAP(WMI_MAIN_SERVICE_WOW,
646 WMI_SERVICE_WOW, len);
647 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
648 WMI_SERVICE_RATECTRL_CACHE, len);
649 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
650 WMI_SERVICE_IRAM_TIDS, len);
651 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
652 WMI_SERVICE_ARPNS_OFFLOAD, len);
653 SVCMAP(WMI_MAIN_SERVICE_NLO,
654 WMI_SERVICE_NLO, len);
655 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
656 WMI_SERVICE_GTK_OFFLOAD, len);
657 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
658 WMI_SERVICE_SCAN_SCH, len);
659 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
660 WMI_SERVICE_CSA_OFFLOAD, len);
661 SVCMAP(WMI_MAIN_SERVICE_CHATTER,
662 WMI_SERVICE_CHATTER, len);
663 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
664 WMI_SERVICE_COEX_FREQAVOID, len);
665 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
666 WMI_SERVICE_PACKET_POWER_SAVE, len);
667 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
668 WMI_SERVICE_FORCE_FW_HANG, len);
669 SVCMAP(WMI_MAIN_SERVICE_GPIO,
670 WMI_SERVICE_GPIO, len);
671 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
672 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
673 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
674 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
675 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
676 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
677 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
678 WMI_SERVICE_STA_KEEP_ALIVE, len);
679 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
680 WMI_SERVICE_TX_ENCAP, len);
681 }
682
wmi_10_4_svc_map(const __le32 * in,unsigned long * out,size_t len)683 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
684 size_t len)
685 {
686 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
687 WMI_SERVICE_BEACON_OFFLOAD, len);
688 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
689 WMI_SERVICE_SCAN_OFFLOAD, len);
690 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
691 WMI_SERVICE_ROAM_OFFLOAD, len);
692 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
693 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
694 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
695 WMI_SERVICE_STA_PWRSAVE, len);
696 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
697 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
698 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
699 WMI_SERVICE_AP_UAPSD, len);
700 SVCMAP(WMI_10_4_SERVICE_AP_DFS,
701 WMI_SERVICE_AP_DFS, len);
702 SVCMAP(WMI_10_4_SERVICE_11AC,
703 WMI_SERVICE_11AC, len);
704 SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
705 WMI_SERVICE_BLOCKACK, len);
706 SVCMAP(WMI_10_4_SERVICE_PHYERR,
707 WMI_SERVICE_PHYERR, len);
708 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
709 WMI_SERVICE_BCN_FILTER, len);
710 SVCMAP(WMI_10_4_SERVICE_RTT,
711 WMI_SERVICE_RTT, len);
712 SVCMAP(WMI_10_4_SERVICE_RATECTRL,
713 WMI_SERVICE_RATECTRL, len);
714 SVCMAP(WMI_10_4_SERVICE_WOW,
715 WMI_SERVICE_WOW, len);
716 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
717 WMI_SERVICE_RATECTRL_CACHE, len);
718 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
719 WMI_SERVICE_IRAM_TIDS, len);
720 SVCMAP(WMI_10_4_SERVICE_BURST,
721 WMI_SERVICE_BURST, len);
722 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
723 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
724 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
725 WMI_SERVICE_GTK_OFFLOAD, len);
726 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
727 WMI_SERVICE_SCAN_SCH, len);
728 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
729 WMI_SERVICE_CSA_OFFLOAD, len);
730 SVCMAP(WMI_10_4_SERVICE_CHATTER,
731 WMI_SERVICE_CHATTER, len);
732 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
733 WMI_SERVICE_COEX_FREQAVOID, len);
734 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
735 WMI_SERVICE_PACKET_POWER_SAVE, len);
736 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
737 WMI_SERVICE_FORCE_FW_HANG, len);
738 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
739 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
740 SVCMAP(WMI_10_4_SERVICE_GPIO,
741 WMI_SERVICE_GPIO, len);
742 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
743 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
744 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
745 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
746 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
747 WMI_SERVICE_STA_KEEP_ALIVE, len);
748 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
749 WMI_SERVICE_TX_ENCAP, len);
750 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
751 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
752 SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
753 WMI_SERVICE_EARLY_RX, len);
754 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
755 WMI_SERVICE_ENHANCED_PROXY_STA, len);
756 SVCMAP(WMI_10_4_SERVICE_TT,
757 WMI_SERVICE_TT, len);
758 SVCMAP(WMI_10_4_SERVICE_ATF,
759 WMI_SERVICE_ATF, len);
760 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
761 WMI_SERVICE_PEER_CACHING, len);
762 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
763 WMI_SERVICE_COEX_GPIO, len);
764 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
765 WMI_SERVICE_AUX_SPECTRAL_INTF, len);
766 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
767 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
768 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
769 WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
770 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
771 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
772 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
773 WMI_SERVICE_MESH_NON_11S, len);
774 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
775 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
776 SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
777 WMI_SERVICE_PEER_STATS, len);
778 SVCMAP(WMI_10_4_SERVICE_MESH_11S,
779 WMI_SERVICE_MESH_11S, len);
780 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
781 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
782 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
783 WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
784 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
785 WMI_SERVICE_TX_MODE_PUSH_PULL, len);
786 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
787 WMI_SERVICE_TX_MODE_DYNAMIC, len);
788 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
789 WMI_SERVICE_VDEV_RX_FILTER, len);
790 SVCMAP(WMI_10_4_SERVICE_BTCOEX,
791 WMI_SERVICE_BTCOEX, len);
792 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
793 WMI_SERVICE_CHECK_CAL_VERSION, len);
794 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
795 WMI_SERVICE_DBGLOG_WARN2, len);
796 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
797 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
798 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
799 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
800 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
801 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
802 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
803 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
804 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
805 WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
806 SVCMAP(WMI_10_4_SERVICE_TDLS,
807 WMI_SERVICE_TDLS, len);
808 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
809 WMI_SERVICE_TDLS_OFFCHAN, len);
810 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
811 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
812 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
813 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
814 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
815 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
816 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
817 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
818 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
819 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);
820 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
821 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
822 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
823 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
824 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
825 WMI_SERVICE_TPC_STATS_FINAL, len);
826 SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
827 WMI_SERVICE_TX_DATA_ACK_RSSI, len);
828 SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
829 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
830 SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
831 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);
832 SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
833 WMI_SERVICE_RTT_RESPONDER_ROLE, len);
834 SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
835 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
836 SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
837 WMI_SERVICE_REPORT_AIRTIME, len);
838 SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
839 WMI_SERVICE_TX_PWR_PER_PEER, len);
840 SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
841 WMI_SERVICE_RESET_CHIP, len);
842 SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
843 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
844 SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
845 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
846 }
847
848 #undef SVCMAP
849
850 /* 2 word representation of MAC addr */
851 struct wmi_mac_addr {
852 union {
853 u8 addr[6];
854 struct {
855 u32 word0;
856 u32 word1;
857 } __packed;
858 } __packed;
859 } __packed;
860
861 struct wmi_cmd_map {
862 u32 init_cmdid;
863 u32 start_scan_cmdid;
864 u32 stop_scan_cmdid;
865 u32 scan_chan_list_cmdid;
866 u32 scan_sch_prio_tbl_cmdid;
867 u32 scan_prob_req_oui_cmdid;
868 u32 pdev_set_regdomain_cmdid;
869 u32 pdev_set_channel_cmdid;
870 u32 pdev_set_param_cmdid;
871 u32 pdev_pktlog_enable_cmdid;
872 u32 pdev_pktlog_disable_cmdid;
873 u32 pdev_set_wmm_params_cmdid;
874 u32 pdev_set_ht_cap_ie_cmdid;
875 u32 pdev_set_vht_cap_ie_cmdid;
876 u32 pdev_set_dscp_tid_map_cmdid;
877 u32 pdev_set_quiet_mode_cmdid;
878 u32 pdev_green_ap_ps_enable_cmdid;
879 u32 pdev_get_tpc_config_cmdid;
880 u32 pdev_set_base_macaddr_cmdid;
881 u32 vdev_create_cmdid;
882 u32 vdev_delete_cmdid;
883 u32 vdev_start_request_cmdid;
884 u32 vdev_restart_request_cmdid;
885 u32 vdev_up_cmdid;
886 u32 vdev_stop_cmdid;
887 u32 vdev_down_cmdid;
888 u32 vdev_set_param_cmdid;
889 u32 vdev_install_key_cmdid;
890 u32 peer_create_cmdid;
891 u32 peer_delete_cmdid;
892 u32 peer_flush_tids_cmdid;
893 u32 peer_set_param_cmdid;
894 u32 peer_assoc_cmdid;
895 u32 peer_add_wds_entry_cmdid;
896 u32 peer_remove_wds_entry_cmdid;
897 u32 peer_mcast_group_cmdid;
898 u32 bcn_tx_cmdid;
899 u32 pdev_send_bcn_cmdid;
900 u32 bcn_tmpl_cmdid;
901 u32 bcn_filter_rx_cmdid;
902 u32 prb_req_filter_rx_cmdid;
903 u32 mgmt_tx_cmdid;
904 u32 mgmt_tx_send_cmdid;
905 u32 prb_tmpl_cmdid;
906 u32 addba_clear_resp_cmdid;
907 u32 addba_send_cmdid;
908 u32 addba_status_cmdid;
909 u32 delba_send_cmdid;
910 u32 addba_set_resp_cmdid;
911 u32 send_singleamsdu_cmdid;
912 u32 sta_powersave_mode_cmdid;
913 u32 sta_powersave_param_cmdid;
914 u32 sta_mimo_ps_mode_cmdid;
915 u32 pdev_dfs_enable_cmdid;
916 u32 pdev_dfs_disable_cmdid;
917 u32 roam_scan_mode;
918 u32 roam_scan_rssi_threshold;
919 u32 roam_scan_period;
920 u32 roam_scan_rssi_change_threshold;
921 u32 roam_ap_profile;
922 u32 ofl_scan_add_ap_profile;
923 u32 ofl_scan_remove_ap_profile;
924 u32 ofl_scan_period;
925 u32 p2p_dev_set_device_info;
926 u32 p2p_dev_set_discoverability;
927 u32 p2p_go_set_beacon_ie;
928 u32 p2p_go_set_probe_resp_ie;
929 u32 p2p_set_vendor_ie_data_cmdid;
930 u32 ap_ps_peer_param_cmdid;
931 u32 ap_ps_peer_uapsd_coex_cmdid;
932 u32 peer_rate_retry_sched_cmdid;
933 u32 wlan_profile_trigger_cmdid;
934 u32 wlan_profile_set_hist_intvl_cmdid;
935 u32 wlan_profile_get_profile_data_cmdid;
936 u32 wlan_profile_enable_profile_id_cmdid;
937 u32 wlan_profile_list_profile_id_cmdid;
938 u32 pdev_suspend_cmdid;
939 u32 pdev_resume_cmdid;
940 u32 add_bcn_filter_cmdid;
941 u32 rmv_bcn_filter_cmdid;
942 u32 wow_add_wake_pattern_cmdid;
943 u32 wow_del_wake_pattern_cmdid;
944 u32 wow_enable_disable_wake_event_cmdid;
945 u32 wow_enable_cmdid;
946 u32 wow_hostwakeup_from_sleep_cmdid;
947 u32 rtt_measreq_cmdid;
948 u32 rtt_tsf_cmdid;
949 u32 vdev_spectral_scan_configure_cmdid;
950 u32 vdev_spectral_scan_enable_cmdid;
951 u32 request_stats_cmdid;
952 u32 request_peer_stats_info_cmdid;
953 u32 set_arp_ns_offload_cmdid;
954 u32 network_list_offload_config_cmdid;
955 u32 gtk_offload_cmdid;
956 u32 csa_offload_enable_cmdid;
957 u32 csa_offload_chanswitch_cmdid;
958 u32 chatter_set_mode_cmdid;
959 u32 peer_tid_addba_cmdid;
960 u32 peer_tid_delba_cmdid;
961 u32 sta_dtim_ps_method_cmdid;
962 u32 sta_uapsd_auto_trig_cmdid;
963 u32 sta_keepalive_cmd;
964 u32 echo_cmdid;
965 u32 pdev_utf_cmdid;
966 u32 dbglog_cfg_cmdid;
967 u32 pdev_qvit_cmdid;
968 u32 pdev_ftm_intg_cmdid;
969 u32 vdev_set_keepalive_cmdid;
970 u32 vdev_get_keepalive_cmdid;
971 u32 force_fw_hang_cmdid;
972 u32 gpio_config_cmdid;
973 u32 gpio_output_cmdid;
974 u32 pdev_get_temperature_cmdid;
975 u32 vdev_set_wmm_params_cmdid;
976 u32 tdls_set_state_cmdid;
977 u32 tdls_peer_update_cmdid;
978 u32 adaptive_qcs_cmdid;
979 u32 scan_update_request_cmdid;
980 u32 vdev_standby_response_cmdid;
981 u32 vdev_resume_response_cmdid;
982 u32 wlan_peer_caching_add_peer_cmdid;
983 u32 wlan_peer_caching_evict_peer_cmdid;
984 u32 wlan_peer_caching_restore_peer_cmdid;
985 u32 wlan_peer_caching_print_all_peers_info_cmdid;
986 u32 peer_update_wds_entry_cmdid;
987 u32 peer_add_proxy_sta_entry_cmdid;
988 u32 rtt_keepalive_cmdid;
989 u32 oem_req_cmdid;
990 u32 nan_cmdid;
991 u32 vdev_ratemask_cmdid;
992 u32 qboost_cfg_cmdid;
993 u32 pdev_smart_ant_enable_cmdid;
994 u32 pdev_smart_ant_set_rx_antenna_cmdid;
995 u32 peer_smart_ant_set_tx_antenna_cmdid;
996 u32 peer_smart_ant_set_train_info_cmdid;
997 u32 peer_smart_ant_set_node_config_ops_cmdid;
998 u32 pdev_set_antenna_switch_table_cmdid;
999 u32 pdev_set_ctl_table_cmdid;
1000 u32 pdev_set_mimogain_table_cmdid;
1001 u32 pdev_ratepwr_table_cmdid;
1002 u32 pdev_ratepwr_chainmsk_table_cmdid;
1003 u32 pdev_fips_cmdid;
1004 u32 tt_set_conf_cmdid;
1005 u32 fwtest_cmdid;
1006 u32 vdev_atf_request_cmdid;
1007 u32 peer_atf_request_cmdid;
1008 u32 pdev_get_ani_cck_config_cmdid;
1009 u32 pdev_get_ani_ofdm_config_cmdid;
1010 u32 pdev_reserve_ast_entry_cmdid;
1011 u32 pdev_get_nfcal_power_cmdid;
1012 u32 pdev_get_tpc_cmdid;
1013 u32 pdev_get_ast_info_cmdid;
1014 u32 vdev_set_dscp_tid_map_cmdid;
1015 u32 pdev_get_info_cmdid;
1016 u32 vdev_get_info_cmdid;
1017 u32 vdev_filter_neighbor_rx_packets_cmdid;
1018 u32 mu_cal_start_cmdid;
1019 u32 set_cca_params_cmdid;
1020 u32 pdev_bss_chan_info_request_cmdid;
1021 u32 pdev_enable_adaptive_cca_cmdid;
1022 u32 ext_resource_cfg_cmdid;
1023 u32 vdev_set_ie_cmdid;
1024 u32 set_lteu_config_cmdid;
1025 u32 atf_ssid_grouping_request_cmdid;
1026 u32 peer_atf_ext_request_cmdid;
1027 u32 set_periodic_channel_stats_cfg_cmdid;
1028 u32 peer_bwf_request_cmdid;
1029 u32 btcoex_cfg_cmdid;
1030 u32 peer_tx_mu_txmit_count_cmdid;
1031 u32 peer_tx_mu_txmit_rstcnt_cmdid;
1032 u32 peer_gid_userpos_list_cmdid;
1033 u32 pdev_check_cal_version_cmdid;
1034 u32 coex_version_cfg_cmid;
1035 u32 pdev_get_rx_filter_cmdid;
1036 u32 pdev_extended_nss_cfg_cmdid;
1037 u32 vdev_set_scan_nac_rssi_cmdid;
1038 u32 prog_gpio_band_select_cmdid;
1039 u32 config_smart_logging_cmdid;
1040 u32 debug_fatal_condition_cmdid;
1041 u32 get_tsf_timer_cmdid;
1042 u32 pdev_get_tpc_table_cmdid;
1043 u32 vdev_sifs_trigger_time_cmdid;
1044 u32 pdev_wds_entry_list_cmdid;
1045 u32 tdls_set_offchan_mode_cmdid;
1046 u32 radar_found_cmdid;
1047 u32 set_bb_timing_cmdid;
1048 u32 per_peer_per_tid_config_cmdid;
1049 };
1050
1051 /*
1052 * wmi command groups.
1053 */
1054 enum wmi_cmd_group {
1055 /* 0 to 2 are reserved */
1056 WMI_GRP_START = 0x3,
1057 WMI_GRP_SCAN = WMI_GRP_START,
1058 WMI_GRP_PDEV,
1059 WMI_GRP_VDEV,
1060 WMI_GRP_PEER,
1061 WMI_GRP_MGMT,
1062 WMI_GRP_BA_NEG,
1063 WMI_GRP_STA_PS,
1064 WMI_GRP_DFS,
1065 WMI_GRP_ROAM,
1066 WMI_GRP_OFL_SCAN,
1067 WMI_GRP_P2P,
1068 WMI_GRP_AP_PS,
1069 WMI_GRP_RATE_CTRL,
1070 WMI_GRP_PROFILE,
1071 WMI_GRP_SUSPEND,
1072 WMI_GRP_BCN_FILTER,
1073 WMI_GRP_WOW,
1074 WMI_GRP_RTT,
1075 WMI_GRP_SPECTRAL,
1076 WMI_GRP_STATS,
1077 WMI_GRP_ARP_NS_OFL,
1078 WMI_GRP_NLO_OFL,
1079 WMI_GRP_GTK_OFL,
1080 WMI_GRP_CSA_OFL,
1081 WMI_GRP_CHATTER,
1082 WMI_GRP_TID_ADDBA,
1083 WMI_GRP_MISC,
1084 WMI_GRP_GPIO,
1085 };
1086
1087 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
1088 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
1089
1090 #define WMI_CMD_UNSUPPORTED 0
1091
1092 /* Command IDs and command events for MAIN FW. */
1093 enum wmi_cmd_id {
1094 WMI_INIT_CMDID = 0x1,
1095
1096 /* Scan specific commands */
1097 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
1098 WMI_STOP_SCAN_CMDID,
1099 WMI_SCAN_CHAN_LIST_CMDID,
1100 WMI_SCAN_SCH_PRIO_TBL_CMDID,
1101
1102 /* PDEV (physical device) specific commands */
1103 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
1104 WMI_PDEV_SET_CHANNEL_CMDID,
1105 WMI_PDEV_SET_PARAM_CMDID,
1106 WMI_PDEV_PKTLOG_ENABLE_CMDID,
1107 WMI_PDEV_PKTLOG_DISABLE_CMDID,
1108 WMI_PDEV_SET_WMM_PARAMS_CMDID,
1109 WMI_PDEV_SET_HT_CAP_IE_CMDID,
1110 WMI_PDEV_SET_VHT_CAP_IE_CMDID,
1111 WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
1112 WMI_PDEV_SET_QUIET_MODE_CMDID,
1113 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1114 WMI_PDEV_GET_TPC_CONFIG_CMDID,
1115 WMI_PDEV_SET_BASE_MACADDR_CMDID,
1116
1117 /* VDEV (virtual device) specific commands */
1118 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
1119 WMI_VDEV_DELETE_CMDID,
1120 WMI_VDEV_START_REQUEST_CMDID,
1121 WMI_VDEV_RESTART_REQUEST_CMDID,
1122 WMI_VDEV_UP_CMDID,
1123 WMI_VDEV_STOP_CMDID,
1124 WMI_VDEV_DOWN_CMDID,
1125 WMI_VDEV_SET_PARAM_CMDID,
1126 WMI_VDEV_INSTALL_KEY_CMDID,
1127
1128 /* peer specific commands */
1129 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
1130 WMI_PEER_DELETE_CMDID,
1131 WMI_PEER_FLUSH_TIDS_CMDID,
1132 WMI_PEER_SET_PARAM_CMDID,
1133 WMI_PEER_ASSOC_CMDID,
1134 WMI_PEER_ADD_WDS_ENTRY_CMDID,
1135 WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
1136 WMI_PEER_MCAST_GROUP_CMDID,
1137
1138 /* beacon/management specific commands */
1139 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
1140 WMI_PDEV_SEND_BCN_CMDID,
1141 WMI_BCN_TMPL_CMDID,
1142 WMI_BCN_FILTER_RX_CMDID,
1143 WMI_PRB_REQ_FILTER_RX_CMDID,
1144 WMI_MGMT_TX_CMDID,
1145 WMI_PRB_TMPL_CMDID,
1146
1147 /* commands to directly control BA negotiation directly from host. */
1148 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
1149 WMI_ADDBA_SEND_CMDID,
1150 WMI_ADDBA_STATUS_CMDID,
1151 WMI_DELBA_SEND_CMDID,
1152 WMI_ADDBA_SET_RESP_CMDID,
1153 WMI_SEND_SINGLEAMSDU_CMDID,
1154
1155 /* Station power save specific config */
1156 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
1157 WMI_STA_POWERSAVE_PARAM_CMDID,
1158 WMI_STA_MIMO_PS_MODE_CMDID,
1159
1160 /** DFS-specific commands */
1161 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
1162 WMI_PDEV_DFS_DISABLE_CMDID,
1163
1164 /* Roaming specific commands */
1165 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
1166 WMI_ROAM_SCAN_RSSI_THRESHOLD,
1167 WMI_ROAM_SCAN_PERIOD,
1168 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1169 WMI_ROAM_AP_PROFILE,
1170
1171 /* offload scan specific commands */
1172 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
1173 WMI_OFL_SCAN_REMOVE_AP_PROFILE,
1174 WMI_OFL_SCAN_PERIOD,
1175
1176 /* P2P specific commands */
1177 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
1178 WMI_P2P_DEV_SET_DISCOVERABILITY,
1179 WMI_P2P_GO_SET_BEACON_IE,
1180 WMI_P2P_GO_SET_PROBE_RESP_IE,
1181 WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
1182
1183 /* AP power save specific config */
1184 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
1185 WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
1186
1187 /* Rate-control specific commands */
1188 WMI_PEER_RATE_RETRY_SCHED_CMDID =
1189 WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
1190
1191 /* WLAN Profiling commands. */
1192 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
1193 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1194 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1195 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1196 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1197
1198 /* Suspend resume command Ids */
1199 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
1200 WMI_PDEV_RESUME_CMDID,
1201
1202 /* Beacon filter commands */
1203 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
1204 WMI_RMV_BCN_FILTER_CMDID,
1205
1206 /* WOW Specific WMI commands*/
1207 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
1208 WMI_WOW_DEL_WAKE_PATTERN_CMDID,
1209 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1210 WMI_WOW_ENABLE_CMDID,
1211 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1212
1213 /* RTT measurement related cmd */
1214 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
1215 WMI_RTT_TSF_CMDID,
1216
1217 /* spectral scan commands */
1218 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
1219 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1220
1221 /* F/W stats */
1222 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
1223
1224 /* ARP OFFLOAD REQUEST*/
1225 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
1226
1227 /* NS offload confid*/
1228 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
1229
1230 /* GTK offload Specific WMI commands*/
1231 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1232
1233 /* CSA offload Specific WMI commands*/
1234 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1235 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1236
1237 /* Chatter commands*/
1238 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1239
1240 /* addba specific commands */
1241 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1242 WMI_PEER_TID_DELBA_CMDID,
1243
1244 /* set station mimo powersave method */
1245 WMI_STA_DTIM_PS_METHOD_CMDID,
1246 /* Configure the Station UAPSD AC Auto Trigger Parameters */
1247 WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1248
1249 /* STA Keep alive parameter configuration,
1250 * Requires WMI_SERVICE_STA_KEEP_ALIVE
1251 */
1252 WMI_STA_KEEPALIVE_CMD,
1253
1254 /* misc command group */
1255 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1256 WMI_PDEV_UTF_CMDID,
1257 WMI_DBGLOG_CFG_CMDID,
1258 WMI_PDEV_QVIT_CMDID,
1259 WMI_PDEV_FTM_INTG_CMDID,
1260 WMI_VDEV_SET_KEEPALIVE_CMDID,
1261 WMI_VDEV_GET_KEEPALIVE_CMDID,
1262 WMI_FORCE_FW_HANG_CMDID,
1263
1264 /* GPIO Configuration */
1265 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1266 WMI_GPIO_OUTPUT_CMDID,
1267 };
1268
1269 enum wmi_event_id {
1270 WMI_SERVICE_READY_EVENTID = 0x1,
1271 WMI_READY_EVENTID,
1272 WMI_SERVICE_AVAILABLE_EVENTID,
1273
1274 /* Scan specific events */
1275 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1276
1277 /* PDEV specific events */
1278 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1279 WMI_CHAN_INFO_EVENTID,
1280 WMI_PHYERR_EVENTID,
1281
1282 /* VDEV specific events */
1283 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1284 WMI_VDEV_STOPPED_EVENTID,
1285 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1286
1287 /* peer specific events */
1288 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1289
1290 /* beacon/mgmt specific events */
1291 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1292 WMI_HOST_SWBA_EVENTID,
1293 WMI_TBTTOFFSET_UPDATE_EVENTID,
1294
1295 /* ADDBA Related WMI Events*/
1296 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1297 WMI_TX_ADDBA_COMPLETE_EVENTID,
1298
1299 /* Roam event to trigger roaming on host */
1300 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1301 WMI_PROFILE_MATCH,
1302
1303 /* WoW */
1304 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1305
1306 /* RTT */
1307 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1308 WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1309 WMI_RTT_ERROR_REPORT_EVENTID,
1310
1311 /* GTK offload */
1312 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1313 WMI_GTK_REKEY_FAIL_EVENTID,
1314
1315 /* CSA IE received event */
1316 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1317
1318 /* Misc events */
1319 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1320 WMI_PDEV_UTF_EVENTID,
1321 WMI_DEBUG_MESG_EVENTID,
1322 WMI_UPDATE_STATS_EVENTID,
1323 WMI_DEBUG_PRINT_EVENTID,
1324 WMI_DCS_INTERFERENCE_EVENTID,
1325 WMI_PDEV_QVIT_EVENTID,
1326 WMI_WLAN_PROFILE_DATA_EVENTID,
1327 WMI_PDEV_FTM_INTG_EVENTID,
1328 WMI_WLAN_FREQ_AVOID_EVENTID,
1329 WMI_VDEV_GET_KEEPALIVE_EVENTID,
1330
1331 /* GPIO Event */
1332 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1333 };
1334
1335 /* Command IDs and command events for 10.X firmware */
1336 enum wmi_10x_cmd_id {
1337 WMI_10X_START_CMDID = 0x9000,
1338 WMI_10X_END_CMDID = 0x9FFF,
1339
1340 /* initialize the wlan sub system */
1341 WMI_10X_INIT_CMDID,
1342
1343 /* Scan specific commands */
1344
1345 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1346 WMI_10X_STOP_SCAN_CMDID,
1347 WMI_10X_SCAN_CHAN_LIST_CMDID,
1348 WMI_10X_ECHO_CMDID,
1349
1350 /* PDEV(physical device) specific commands */
1351 WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1352 WMI_10X_PDEV_SET_CHANNEL_CMDID,
1353 WMI_10X_PDEV_SET_PARAM_CMDID,
1354 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1355 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1356 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1357 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1358 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1359 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1360 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1361 WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1362 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1363 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1364
1365 /* VDEV(virtual device) specific commands */
1366 WMI_10X_VDEV_CREATE_CMDID,
1367 WMI_10X_VDEV_DELETE_CMDID,
1368 WMI_10X_VDEV_START_REQUEST_CMDID,
1369 WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1370 WMI_10X_VDEV_UP_CMDID,
1371 WMI_10X_VDEV_STOP_CMDID,
1372 WMI_10X_VDEV_DOWN_CMDID,
1373 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1374 WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1375 WMI_10X_VDEV_SET_PARAM_CMDID,
1376 WMI_10X_VDEV_INSTALL_KEY_CMDID,
1377
1378 /* peer specific commands */
1379 WMI_10X_PEER_CREATE_CMDID,
1380 WMI_10X_PEER_DELETE_CMDID,
1381 WMI_10X_PEER_FLUSH_TIDS_CMDID,
1382 WMI_10X_PEER_SET_PARAM_CMDID,
1383 WMI_10X_PEER_ASSOC_CMDID,
1384 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1385 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1386 WMI_10X_PEER_MCAST_GROUP_CMDID,
1387
1388 /* beacon/management specific commands */
1389
1390 WMI_10X_BCN_TX_CMDID,
1391 WMI_10X_BCN_PRB_TMPL_CMDID,
1392 WMI_10X_BCN_FILTER_RX_CMDID,
1393 WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1394 WMI_10X_MGMT_TX_CMDID,
1395
1396 /* commands to directly control ba negotiation directly from host. */
1397 WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1398 WMI_10X_ADDBA_SEND_CMDID,
1399 WMI_10X_ADDBA_STATUS_CMDID,
1400 WMI_10X_DELBA_SEND_CMDID,
1401 WMI_10X_ADDBA_SET_RESP_CMDID,
1402 WMI_10X_SEND_SINGLEAMSDU_CMDID,
1403
1404 /* Station power save specific config */
1405 WMI_10X_STA_POWERSAVE_MODE_CMDID,
1406 WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1407 WMI_10X_STA_MIMO_PS_MODE_CMDID,
1408
1409 /* set debug log config */
1410 WMI_10X_DBGLOG_CFG_CMDID,
1411
1412 /* DFS-specific commands */
1413 WMI_10X_PDEV_DFS_ENABLE_CMDID,
1414 WMI_10X_PDEV_DFS_DISABLE_CMDID,
1415
1416 /* QVIT specific command id */
1417 WMI_10X_PDEV_QVIT_CMDID,
1418
1419 /* Offload Scan and Roaming related commands */
1420 WMI_10X_ROAM_SCAN_MODE,
1421 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1422 WMI_10X_ROAM_SCAN_PERIOD,
1423 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1424 WMI_10X_ROAM_AP_PROFILE,
1425 WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1426 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1427 WMI_10X_OFL_SCAN_PERIOD,
1428
1429 /* P2P specific commands */
1430 WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1431 WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1432 WMI_10X_P2P_GO_SET_BEACON_IE,
1433 WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1434
1435 /* AP power save specific config */
1436 WMI_10X_AP_PS_PEER_PARAM_CMDID,
1437 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1438
1439 /* Rate-control specific commands */
1440 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1441
1442 /* WLAN Profiling commands. */
1443 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1444 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1445 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1446 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1447 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1448
1449 /* Suspend resume command Ids */
1450 WMI_10X_PDEV_SUSPEND_CMDID,
1451 WMI_10X_PDEV_RESUME_CMDID,
1452
1453 /* Beacon filter commands */
1454 WMI_10X_ADD_BCN_FILTER_CMDID,
1455 WMI_10X_RMV_BCN_FILTER_CMDID,
1456
1457 /* WOW Specific WMI commands*/
1458 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1459 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1460 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1461 WMI_10X_WOW_ENABLE_CMDID,
1462 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1463
1464 /* RTT measurement related cmd */
1465 WMI_10X_RTT_MEASREQ_CMDID,
1466 WMI_10X_RTT_TSF_CMDID,
1467
1468 /* transmit beacon by value */
1469 WMI_10X_PDEV_SEND_BCN_CMDID,
1470
1471 /* F/W stats */
1472 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1473 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1474 WMI_10X_REQUEST_STATS_CMDID,
1475
1476 /* GPIO Configuration */
1477 WMI_10X_GPIO_CONFIG_CMDID,
1478 WMI_10X_GPIO_OUTPUT_CMDID,
1479
1480 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1481 };
1482
1483 enum wmi_10x_event_id {
1484 WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1485 WMI_10X_READY_EVENTID,
1486 WMI_10X_START_EVENTID = 0x9000,
1487 WMI_10X_END_EVENTID = 0x9FFF,
1488
1489 /* Scan specific events */
1490 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1491 WMI_10X_ECHO_EVENTID,
1492 WMI_10X_DEBUG_MESG_EVENTID,
1493 WMI_10X_UPDATE_STATS_EVENTID,
1494
1495 /* Instantaneous RSSI event */
1496 WMI_10X_INST_RSSI_STATS_EVENTID,
1497
1498 /* VDEV specific events */
1499 WMI_10X_VDEV_START_RESP_EVENTID,
1500 WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1501 WMI_10X_VDEV_RESUME_REQ_EVENTID,
1502 WMI_10X_VDEV_STOPPED_EVENTID,
1503
1504 /* peer specific events */
1505 WMI_10X_PEER_STA_KICKOUT_EVENTID,
1506
1507 /* beacon/mgmt specific events */
1508 WMI_10X_HOST_SWBA_EVENTID,
1509 WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1510 WMI_10X_MGMT_RX_EVENTID,
1511
1512 /* Channel stats event */
1513 WMI_10X_CHAN_INFO_EVENTID,
1514
1515 /* PHY Error specific WMI event */
1516 WMI_10X_PHYERR_EVENTID,
1517
1518 /* Roam event to trigger roaming on host */
1519 WMI_10X_ROAM_EVENTID,
1520
1521 /* matching AP found from list of profiles */
1522 WMI_10X_PROFILE_MATCH,
1523
1524 /* debug print message used for tracing FW code while debugging */
1525 WMI_10X_DEBUG_PRINT_EVENTID,
1526 /* VI spoecific event */
1527 WMI_10X_PDEV_QVIT_EVENTID,
1528 /* FW code profile data in response to profile request */
1529 WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1530
1531 /*RTT related event ID*/
1532 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1533 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1534 WMI_10X_RTT_ERROR_REPORT_EVENTID,
1535
1536 WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1537 WMI_10X_DCS_INTERFERENCE_EVENTID,
1538
1539 /* TPC config for the current operating channel */
1540 WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1541
1542 WMI_10X_GPIO_INPUT_EVENTID,
1543 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
1544 };
1545
1546 enum wmi_10_2_cmd_id {
1547 WMI_10_2_START_CMDID = 0x9000,
1548 WMI_10_2_END_CMDID = 0x9FFF,
1549 WMI_10_2_INIT_CMDID,
1550 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1551 WMI_10_2_STOP_SCAN_CMDID,
1552 WMI_10_2_SCAN_CHAN_LIST_CMDID,
1553 WMI_10_2_ECHO_CMDID,
1554 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1555 WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1556 WMI_10_2_PDEV_SET_PARAM_CMDID,
1557 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1558 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1559 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1560 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1561 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1562 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1563 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1564 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1565 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1566 WMI_10_2_VDEV_CREATE_CMDID,
1567 WMI_10_2_VDEV_DELETE_CMDID,
1568 WMI_10_2_VDEV_START_REQUEST_CMDID,
1569 WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1570 WMI_10_2_VDEV_UP_CMDID,
1571 WMI_10_2_VDEV_STOP_CMDID,
1572 WMI_10_2_VDEV_DOWN_CMDID,
1573 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1574 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1575 WMI_10_2_VDEV_SET_PARAM_CMDID,
1576 WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1577 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1578 WMI_10_2_PEER_CREATE_CMDID,
1579 WMI_10_2_PEER_DELETE_CMDID,
1580 WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1581 WMI_10_2_PEER_SET_PARAM_CMDID,
1582 WMI_10_2_PEER_ASSOC_CMDID,
1583 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1584 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1585 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1586 WMI_10_2_PEER_MCAST_GROUP_CMDID,
1587 WMI_10_2_BCN_TX_CMDID,
1588 WMI_10_2_BCN_PRB_TMPL_CMDID,
1589 WMI_10_2_BCN_FILTER_RX_CMDID,
1590 WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1591 WMI_10_2_MGMT_TX_CMDID,
1592 WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1593 WMI_10_2_ADDBA_SEND_CMDID,
1594 WMI_10_2_ADDBA_STATUS_CMDID,
1595 WMI_10_2_DELBA_SEND_CMDID,
1596 WMI_10_2_ADDBA_SET_RESP_CMDID,
1597 WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1598 WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1599 WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1600 WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1601 WMI_10_2_DBGLOG_CFG_CMDID,
1602 WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1603 WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1604 WMI_10_2_PDEV_QVIT_CMDID,
1605 WMI_10_2_ROAM_SCAN_MODE,
1606 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1607 WMI_10_2_ROAM_SCAN_PERIOD,
1608 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1609 WMI_10_2_ROAM_AP_PROFILE,
1610 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1611 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1612 WMI_10_2_OFL_SCAN_PERIOD,
1613 WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1614 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1615 WMI_10_2_P2P_GO_SET_BEACON_IE,
1616 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1617 WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1618 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1619 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1620 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1621 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1622 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1623 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1624 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1625 WMI_10_2_PDEV_SUSPEND_CMDID,
1626 WMI_10_2_PDEV_RESUME_CMDID,
1627 WMI_10_2_ADD_BCN_FILTER_CMDID,
1628 WMI_10_2_RMV_BCN_FILTER_CMDID,
1629 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1630 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1631 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1632 WMI_10_2_WOW_ENABLE_CMDID,
1633 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1634 WMI_10_2_RTT_MEASREQ_CMDID,
1635 WMI_10_2_RTT_TSF_CMDID,
1636 WMI_10_2_RTT_KEEPALIVE_CMDID,
1637 WMI_10_2_PDEV_SEND_BCN_CMDID,
1638 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1639 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1640 WMI_10_2_REQUEST_STATS_CMDID,
1641 WMI_10_2_GPIO_CONFIG_CMDID,
1642 WMI_10_2_GPIO_OUTPUT_CMDID,
1643 WMI_10_2_VDEV_RATEMASK_CMDID,
1644 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1645 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1646 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1647 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1648 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1649 WMI_10_2_FORCE_FW_HANG_CMDID,
1650 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1651 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1652 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1653 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1654 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1655 WMI_10_2_PDEV_GET_INFO,
1656 WMI_10_2_VDEV_GET_INFO,
1657 WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1658 WMI_10_2_PEER_ATF_REQUEST_CMDID,
1659 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1660 WMI_10_2_MU_CAL_START_CMDID,
1661 WMI_10_2_SET_LTEU_CONFIG_CMDID,
1662 WMI_10_2_SET_CCA_PARAMS,
1663 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1664 WMI_10_2_FWTEST_CMDID,
1665 WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,
1666 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1667 };
1668
1669 enum wmi_10_2_event_id {
1670 WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1671 WMI_10_2_READY_EVENTID,
1672 WMI_10_2_DEBUG_MESG_EVENTID,
1673 WMI_10_2_START_EVENTID = 0x9000,
1674 WMI_10_2_END_EVENTID = 0x9FFF,
1675 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1676 WMI_10_2_ECHO_EVENTID,
1677 WMI_10_2_UPDATE_STATS_EVENTID,
1678 WMI_10_2_INST_RSSI_STATS_EVENTID,
1679 WMI_10_2_VDEV_START_RESP_EVENTID,
1680 WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1681 WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1682 WMI_10_2_VDEV_STOPPED_EVENTID,
1683 WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1684 WMI_10_2_HOST_SWBA_EVENTID,
1685 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1686 WMI_10_2_MGMT_RX_EVENTID,
1687 WMI_10_2_CHAN_INFO_EVENTID,
1688 WMI_10_2_PHYERR_EVENTID,
1689 WMI_10_2_ROAM_EVENTID,
1690 WMI_10_2_PROFILE_MATCH,
1691 WMI_10_2_DEBUG_PRINT_EVENTID,
1692 WMI_10_2_PDEV_QVIT_EVENTID,
1693 WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1694 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1695 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1696 WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1697 WMI_10_2_RTT_KEEPALIVE_EVENTID,
1698 WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1699 WMI_10_2_DCS_INTERFERENCE_EVENTID,
1700 WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1701 WMI_10_2_GPIO_INPUT_EVENTID,
1702 WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1703 WMI_10_2_GENERIC_BUFFER_EVENTID,
1704 WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1705 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1706 WMI_10_2_WDS_PEER_EVENTID,
1707 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1708 WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1709 WMI_10_2_MU_REPORT_EVENTID,
1710 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
1711 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1712 };
1713
1714 enum wmi_10_4_cmd_id {
1715 WMI_10_4_START_CMDID = 0x9000,
1716 WMI_10_4_END_CMDID = 0x9FFF,
1717 WMI_10_4_INIT_CMDID,
1718 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1719 WMI_10_4_STOP_SCAN_CMDID,
1720 WMI_10_4_SCAN_CHAN_LIST_CMDID,
1721 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1722 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1723 WMI_10_4_ECHO_CMDID,
1724 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1725 WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1726 WMI_10_4_PDEV_SET_PARAM_CMDID,
1727 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1728 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1729 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1730 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1731 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1732 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1733 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1734 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1735 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1736 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1737 WMI_10_4_VDEV_CREATE_CMDID,
1738 WMI_10_4_VDEV_DELETE_CMDID,
1739 WMI_10_4_VDEV_START_REQUEST_CMDID,
1740 WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1741 WMI_10_4_VDEV_UP_CMDID,
1742 WMI_10_4_VDEV_STOP_CMDID,
1743 WMI_10_4_VDEV_DOWN_CMDID,
1744 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1745 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1746 WMI_10_4_VDEV_SET_PARAM_CMDID,
1747 WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1748 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1749 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1750 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1751 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1752 WMI_10_4_PEER_CREATE_CMDID,
1753 WMI_10_4_PEER_DELETE_CMDID,
1754 WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1755 WMI_10_4_PEER_SET_PARAM_CMDID,
1756 WMI_10_4_PEER_ASSOC_CMDID,
1757 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1758 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1759 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1760 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1761 WMI_10_4_PEER_MCAST_GROUP_CMDID,
1762 WMI_10_4_BCN_TX_CMDID,
1763 WMI_10_4_PDEV_SEND_BCN_CMDID,
1764 WMI_10_4_BCN_PRB_TMPL_CMDID,
1765 WMI_10_4_BCN_FILTER_RX_CMDID,
1766 WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1767 WMI_10_4_MGMT_TX_CMDID,
1768 WMI_10_4_PRB_TMPL_CMDID,
1769 WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1770 WMI_10_4_ADDBA_SEND_CMDID,
1771 WMI_10_4_ADDBA_STATUS_CMDID,
1772 WMI_10_4_DELBA_SEND_CMDID,
1773 WMI_10_4_ADDBA_SET_RESP_CMDID,
1774 WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1775 WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1776 WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1777 WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1778 WMI_10_4_DBGLOG_CFG_CMDID,
1779 WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1780 WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1781 WMI_10_4_PDEV_QVIT_CMDID,
1782 WMI_10_4_ROAM_SCAN_MODE,
1783 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1784 WMI_10_4_ROAM_SCAN_PERIOD,
1785 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1786 WMI_10_4_ROAM_AP_PROFILE,
1787 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1788 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1789 WMI_10_4_OFL_SCAN_PERIOD,
1790 WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1791 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1792 WMI_10_4_P2P_GO_SET_BEACON_IE,
1793 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1794 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1795 WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1796 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1797 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1798 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1799 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1800 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1801 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1802 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1803 WMI_10_4_PDEV_SUSPEND_CMDID,
1804 WMI_10_4_PDEV_RESUME_CMDID,
1805 WMI_10_4_ADD_BCN_FILTER_CMDID,
1806 WMI_10_4_RMV_BCN_FILTER_CMDID,
1807 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1808 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1809 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1810 WMI_10_4_WOW_ENABLE_CMDID,
1811 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1812 WMI_10_4_RTT_MEASREQ_CMDID,
1813 WMI_10_4_RTT_TSF_CMDID,
1814 WMI_10_4_RTT_KEEPALIVE_CMDID,
1815 WMI_10_4_OEM_REQ_CMDID,
1816 WMI_10_4_NAN_CMDID,
1817 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1818 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1819 WMI_10_4_REQUEST_STATS_CMDID,
1820 WMI_10_4_GPIO_CONFIG_CMDID,
1821 WMI_10_4_GPIO_OUTPUT_CMDID,
1822 WMI_10_4_VDEV_RATEMASK_CMDID,
1823 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1824 WMI_10_4_GTK_OFFLOAD_CMDID,
1825 WMI_10_4_QBOOST_CFG_CMDID,
1826 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1827 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1828 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1829 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1830 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1831 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1832 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1833 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1834 WMI_10_4_FORCE_FW_HANG_CMDID,
1835 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1836 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1837 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1838 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1839 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1840 WMI_10_4_PDEV_FIPS_CMDID,
1841 WMI_10_4_TT_SET_CONF_CMDID,
1842 WMI_10_4_FWTEST_CMDID,
1843 WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1844 WMI_10_4_PEER_ATF_REQUEST_CMDID,
1845 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1846 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1847 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1848 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1849 WMI_10_4_PDEV_GET_TPC_CMDID,
1850 WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1851 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1852 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1853 WMI_10_4_PDEV_GET_INFO_CMDID,
1854 WMI_10_4_VDEV_GET_INFO_CMDID,
1855 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1856 WMI_10_4_MU_CAL_START_CMDID,
1857 WMI_10_4_SET_CCA_PARAMS_CMDID,
1858 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1859 WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1860 WMI_10_4_VDEV_SET_IE_CMDID,
1861 WMI_10_4_SET_LTEU_CONFIG_CMDID,
1862 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
1863 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
1864 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
1865 WMI_10_4_PEER_BWF_REQUEST_CMDID,
1866 WMI_10_4_BTCOEX_CFG_CMDID,
1867 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
1868 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
1869 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
1870 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
1871 WMI_10_4_COEX_VERSION_CFG_CMID,
1872 WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
1873 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
1874 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
1875 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
1876 WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
1877 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
1878 WMI_10_4_GET_TSF_TIMER_CMDID,
1879 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
1880 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
1881 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
1882 WMI_10_4_TDLS_SET_STATE_CMDID,
1883 WMI_10_4_TDLS_PEER_UPDATE_CMDID,
1884 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
1885 WMI_10_4_PDEV_SEND_FD_CMDID,
1886 WMI_10_4_ENABLE_FILS_CMDID,
1887 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
1888 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
1889 WMI_10_4_RADAR_FOUND_CMDID,
1890 WMI_10_4_PEER_CFR_CAPTURE_CMDID,
1891 WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
1892 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1893 };
1894
1895 enum wmi_10_4_event_id {
1896 WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1897 WMI_10_4_READY_EVENTID,
1898 WMI_10_4_DEBUG_MESG_EVENTID,
1899 WMI_10_4_START_EVENTID = 0x9000,
1900 WMI_10_4_END_EVENTID = 0x9FFF,
1901 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1902 WMI_10_4_ECHO_EVENTID,
1903 WMI_10_4_UPDATE_STATS_EVENTID,
1904 WMI_10_4_INST_RSSI_STATS_EVENTID,
1905 WMI_10_4_VDEV_START_RESP_EVENTID,
1906 WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1907 WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1908 WMI_10_4_VDEV_STOPPED_EVENTID,
1909 WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1910 WMI_10_4_HOST_SWBA_EVENTID,
1911 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1912 WMI_10_4_MGMT_RX_EVENTID,
1913 WMI_10_4_CHAN_INFO_EVENTID,
1914 WMI_10_4_PHYERR_EVENTID,
1915 WMI_10_4_ROAM_EVENTID,
1916 WMI_10_4_PROFILE_MATCH,
1917 WMI_10_4_DEBUG_PRINT_EVENTID,
1918 WMI_10_4_PDEV_QVIT_EVENTID,
1919 WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1920 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1921 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1922 WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1923 WMI_10_4_RTT_KEEPALIVE_EVENTID,
1924 WMI_10_4_OEM_CAPABILITY_EVENTID,
1925 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1926 WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1927 WMI_10_4_NAN_EVENTID,
1928 WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1929 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1930 WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1931 WMI_10_4_DCS_INTERFERENCE_EVENTID,
1932 WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1933 WMI_10_4_CSA_HANDLING_EVENTID,
1934 WMI_10_4_GPIO_INPUT_EVENTID,
1935 WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1936 WMI_10_4_GENERIC_BUFFER_EVENTID,
1937 WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1938 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1939 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1940 WMI_10_4_WDS_PEER_EVENTID,
1941 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1942 WMI_10_4_PDEV_FIPS_EVENTID,
1943 WMI_10_4_TT_STATS_EVENTID,
1944 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1945 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1946 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1947 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1948 WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1949 WMI_10_4_PDEV_TPC_EVENTID,
1950 WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1951 WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1952 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1953 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1954 WMI_10_4_MU_REPORT_EVENTID,
1955 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
1956 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
1957 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
1958 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
1959 WMI_10_4_ATF_PEER_STATS_EVENTID,
1960 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
1961 WMI_10_4_NAC_RSSI_EVENTID,
1962 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
1963 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
1964 WMI_10_4_PDEV_TPC_TABLE_EVENTID,
1965 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
1966 WMI_10_4_TDLS_PEER_EVENTID,
1967 WMI_10_4_HOST_SWFDA_EVENTID,
1968 WMI_10_4_ESP_ESTIMATE_EVENTID,
1969 WMI_10_4_DFS_STATUS_CHECK_EVENTID,
1970 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1971 };
1972
1973 enum wmi_phy_mode {
1974 MODE_11A = 0, /* 11a Mode */
1975 MODE_11G = 1, /* 11b/g Mode */
1976 MODE_11B = 2, /* 11b Mode */
1977 MODE_11GONLY = 3, /* 11g only Mode */
1978 MODE_11NA_HT20 = 4, /* 11a HT20 mode */
1979 MODE_11NG_HT20 = 5, /* 11g HT20 mode */
1980 MODE_11NA_HT40 = 6, /* 11a HT40 mode */
1981 MODE_11NG_HT40 = 7, /* 11g HT40 mode */
1982 MODE_11AC_VHT20 = 8,
1983 MODE_11AC_VHT40 = 9,
1984 MODE_11AC_VHT80 = 10,
1985 /* MODE_11AC_VHT160 = 11, */
1986 MODE_11AC_VHT20_2G = 11,
1987 MODE_11AC_VHT40_2G = 12,
1988 MODE_11AC_VHT80_2G = 13,
1989 MODE_11AC_VHT80_80 = 14,
1990 MODE_11AC_VHT160 = 15,
1991 MODE_UNKNOWN = 16,
1992 MODE_MAX = 16
1993 };
1994
ath10k_wmi_phymode_str(enum wmi_phy_mode mode)1995 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1996 {
1997 switch (mode) {
1998 case MODE_11A:
1999 return "11a";
2000 case MODE_11G:
2001 return "11g";
2002 case MODE_11B:
2003 return "11b";
2004 case MODE_11GONLY:
2005 return "11gonly";
2006 case MODE_11NA_HT20:
2007 return "11na-ht20";
2008 case MODE_11NG_HT20:
2009 return "11ng-ht20";
2010 case MODE_11NA_HT40:
2011 return "11na-ht40";
2012 case MODE_11NG_HT40:
2013 return "11ng-ht40";
2014 case MODE_11AC_VHT20:
2015 return "11ac-vht20";
2016 case MODE_11AC_VHT40:
2017 return "11ac-vht40";
2018 case MODE_11AC_VHT80:
2019 return "11ac-vht80";
2020 case MODE_11AC_VHT160:
2021 return "11ac-vht160";
2022 case MODE_11AC_VHT80_80:
2023 return "11ac-vht80+80";
2024 case MODE_11AC_VHT20_2G:
2025 return "11ac-vht20-2g";
2026 case MODE_11AC_VHT40_2G:
2027 return "11ac-vht40-2g";
2028 case MODE_11AC_VHT80_2G:
2029 return "11ac-vht80-2g";
2030 case MODE_UNKNOWN:
2031 /* skip */
2032 break;
2033
2034 /* no default handler to allow compiler to check that the
2035 * enum is fully handled
2036 */
2037 }
2038
2039 return "<unknown>";
2040 }
2041
2042 #define WMI_CHAN_LIST_TAG 0x1
2043 #define WMI_SSID_LIST_TAG 0x2
2044 #define WMI_BSSID_LIST_TAG 0x3
2045 #define WMI_IE_TAG 0x4
2046
2047 struct wmi_channel {
2048 __le32 mhz;
2049 __le32 band_center_freq1;
2050 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
2051 union {
2052 __le32 flags; /* WMI_CHAN_FLAG_ */
2053 struct {
2054 u8 mode; /* only 6 LSBs */
2055 } __packed;
2056 } __packed;
2057 union {
2058 __le32 reginfo0;
2059 struct {
2060 /* note: power unit is 0.5 dBm */
2061 u8 min_power;
2062 u8 max_power;
2063 u8 reg_power;
2064 u8 reg_classid;
2065 } __packed;
2066 } __packed;
2067 union {
2068 __le32 reginfo1;
2069 struct {
2070 /* note: power unit is 1 dBm */
2071 u8 antenna_max;
2072 /* note: power unit is 0.5 dBm */
2073 u8 max_tx_power;
2074 } __packed;
2075 } __packed;
2076 } __packed;
2077
2078 struct wmi_channel_arg {
2079 u32 freq;
2080 u32 band_center_freq1;
2081 u32 band_center_freq2;
2082 bool passive;
2083 bool allow_ibss;
2084 bool allow_ht;
2085 bool allow_vht;
2086 bool ht40plus;
2087 bool chan_radar;
2088 /* note: power unit is 0.5 dBm */
2089 u32 min_power;
2090 u32 max_power;
2091 u32 max_reg_power;
2092 /* note: power unit is 1 dBm */
2093 u32 max_antenna_gain;
2094 u32 reg_class_id;
2095 enum wmi_phy_mode mode;
2096 };
2097
2098 enum wmi_channel_change_cause {
2099 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
2100 WMI_CHANNEL_CHANGE_CAUSE_CSA,
2101 };
2102
2103 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6)
2104 #define WMI_CHAN_FLAG_PASSIVE (1 << 7)
2105 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8)
2106 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9)
2107 #define WMI_CHAN_FLAG_DFS (1 << 10)
2108 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11)
2109 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12)
2110
2111 /* Indicate reason for channel switch */
2112 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
2113 /* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/
2114 #define WMI_CHAN_FLAG_DFS_CFREQ2 (1 << 15)
2115 #define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */
2116
2117 /* HT Capabilities*/
2118 #define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */
2119 #define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */
2120 #define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */
2121 #define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */
2122 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3
2123 #define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */
2124 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4
2125 #define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */
2126 #define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */
2127 #define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */
2128 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
2129 #define WMI_HT_CAP_HT40_SGI 0x0800
2130 #define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */
2131 #define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */
2132
2133 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \
2134 WMI_HT_CAP_HT20_SGI | \
2135 WMI_HT_CAP_HT40_SGI | \
2136 WMI_HT_CAP_TX_STBC | \
2137 WMI_HT_CAP_RX_STBC | \
2138 WMI_HT_CAP_LDPC)
2139
2140 /*
2141 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
2142 * field. The fields not defined here are not supported, or reserved.
2143 * Do not change these masks and if you have to add new one follow the
2144 * bitmask as specified by 802.11ac draft.
2145 */
2146
2147 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003
2148 #define WMI_VHT_CAP_RX_LDPC 0x00000010
2149 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020
2150 #define WMI_VHT_CAP_SGI_160MHZ 0x00000040
2151 #define WMI_VHT_CAP_TX_STBC 0x00000080
2152 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300
2153 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8
2154 #define WMI_VHT_CAP_SU_BFER 0x00000800
2155 #define WMI_VHT_CAP_SU_BFEE 0x00001000
2156 #define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000
2157 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13
2158 #define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000
2159 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16
2160 #define WMI_VHT_CAP_MU_BFER 0x00080000
2161 #define WMI_VHT_CAP_MU_BFEE 0x00100000
2162 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000
2163 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23
2164 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000
2165 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000
2166
2167 /* The following also refer for max HT AMSDU */
2168 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000
2169 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001
2170 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002
2171
2172 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \
2173 WMI_VHT_CAP_RX_LDPC | \
2174 WMI_VHT_CAP_SGI_80MHZ | \
2175 WMI_VHT_CAP_TX_STBC | \
2176 WMI_VHT_CAP_RX_STBC_MASK | \
2177 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \
2178 WMI_VHT_CAP_RX_FIXED_ANT | \
2179 WMI_VHT_CAP_TX_FIXED_ANT)
2180
2181 /*
2182 * Interested readers refer to Rx/Tx MCS Map definition as defined in
2183 * 802.11ac
2184 */
2185 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1))
2186 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000
2187 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16
2188
2189 enum {
2190 REGDMN_MODE_11A = 0x00001, /* 11a channels */
2191 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */
2192 REGDMN_MODE_11B = 0x00004, /* 11b channels */
2193 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */
2194 REGDMN_MODE_11G = 0x00008, /* XXX historical */
2195 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */
2196 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */
2197 REGDMN_MODE_XR = 0x00100, /* XR channels */
2198 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */
2199 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
2200 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */
2201 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */
2202 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */
2203 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */
2204 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */
2205 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */
2206 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */
2207 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */
2208 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */
2209 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */
2210 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */
2211 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */
2212 REGDMN_MODE_ALL = 0xffffffff
2213 };
2214
2215 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001
2216 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002
2217 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004
2218
2219 /* regulatory capabilities */
2220 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040
2221 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080
2222 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100
2223 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200
2224 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400
2225 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800
2226
2227 struct hal_reg_capabilities {
2228 /* regdomain value specified in EEPROM */
2229 __le32 eeprom_rd;
2230 /*regdomain */
2231 __le32 eeprom_rd_ext;
2232 /* CAP1 capabilities bit map. */
2233 __le32 regcap1;
2234 /* REGDMN EEPROM CAP. */
2235 __le32 regcap2;
2236 /* REGDMN MODE */
2237 __le32 wireless_modes;
2238 __le32 low_2ghz_chan;
2239 __le32 high_2ghz_chan;
2240 __le32 low_5ghz_chan;
2241 __le32 high_5ghz_chan;
2242 } __packed;
2243
2244 enum wlan_mode_capability {
2245 WHAL_WLAN_11A_CAPABILITY = 0x1,
2246 WHAL_WLAN_11G_CAPABILITY = 0x2,
2247 WHAL_WLAN_11AG_CAPABILITY = 0x3,
2248 };
2249
2250 /* structure used by FW for requesting host memory */
2251 struct wlan_host_mem_req {
2252 /* ID of the request */
2253 __le32 req_id;
2254 /* size of the of each unit */
2255 __le32 unit_size;
2256 /* flags to indicate that
2257 * the number units is dependent
2258 * on number of resources(num vdevs num peers .. etc)
2259 */
2260 __le32 num_unit_info;
2261 /*
2262 * actual number of units to allocate . if flags in the num_unit_info
2263 * indicate that number of units is tied to number of a particular
2264 * resource to allocate then num_units filed is set to 0 and host
2265 * will derive the number units from number of the resources it is
2266 * requesting.
2267 */
2268 __le32 num_units;
2269 } __packed;
2270
2271 /*
2272 * The following struct holds optional payload for
2273 * wmi_service_ready_event,e.g., 11ac pass some of the
2274 * device capability to the host.
2275 */
2276 struct wmi_service_ready_event {
2277 __le32 sw_version;
2278 __le32 sw_version_1;
2279 __le32 abi_version;
2280 /* WMI_PHY_CAPABILITY */
2281 __le32 phy_capability;
2282 /* Maximum number of frag table entries that SW will populate less 1 */
2283 __le32 max_frag_entry;
2284 __le32 wmi_service_bitmap[16];
2285 __le32 num_rf_chains;
2286 /*
2287 * The following field is only valid for service type
2288 * WMI_SERVICE_11AC
2289 */
2290 __le32 ht_cap_info; /* WMI HT Capability */
2291 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2292 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2293 __le32 hw_min_tx_power;
2294 __le32 hw_max_tx_power;
2295 struct hal_reg_capabilities hal_reg_capabilities;
2296 __le32 sys_cap_info;
2297 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2298 /*
2299 * Max beacon and Probe Response IE offload size
2300 * (includes optional P2P IEs)
2301 */
2302 __le32 max_bcn_ie_size;
2303 /*
2304 * request to host to allocate a chuck of memory and pss it down to FW
2305 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2306 * data structures. Only valid for low latency interfaces like PCIE
2307 * where FW can access this memory directly (or) by DMA.
2308 */
2309 __le32 num_mem_reqs;
2310 struct wlan_host_mem_req mem_reqs[];
2311 } __packed;
2312
2313 /* This is the definition from 10.X firmware branch */
2314 struct wmi_10x_service_ready_event {
2315 __le32 sw_version;
2316 __le32 abi_version;
2317
2318 /* WMI_PHY_CAPABILITY */
2319 __le32 phy_capability;
2320
2321 /* Maximum number of frag table entries that SW will populate less 1 */
2322 __le32 max_frag_entry;
2323 __le32 wmi_service_bitmap[16];
2324 __le32 num_rf_chains;
2325
2326 /*
2327 * The following field is only valid for service type
2328 * WMI_SERVICE_11AC
2329 */
2330 __le32 ht_cap_info; /* WMI HT Capability */
2331 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2332 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2333 __le32 hw_min_tx_power;
2334 __le32 hw_max_tx_power;
2335
2336 struct hal_reg_capabilities hal_reg_capabilities;
2337
2338 __le32 sys_cap_info;
2339 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2340
2341 /*
2342 * request to host to allocate a chuck of memory and pss it down to FW
2343 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2344 * data structures. Only valid for low latency interfaces like PCIE
2345 * where FW can access this memory directly (or) by DMA.
2346 */
2347 __le32 num_mem_reqs;
2348
2349 struct wlan_host_mem_req mem_reqs[];
2350 } __packed;
2351
2352 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
2353 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
2354
2355 struct wmi_ready_event {
2356 __le32 sw_version;
2357 __le32 abi_version;
2358 struct wmi_mac_addr mac_addr;
2359 __le32 status;
2360 } __packed;
2361
2362 struct wmi_resource_config {
2363 /* number of virtual devices (VAPs) to support */
2364 __le32 num_vdevs;
2365
2366 /* number of peer nodes to support */
2367 __le32 num_peers;
2368
2369 /*
2370 * In offload mode target supports features like WOW, chatter and
2371 * other protocol offloads. In order to support them some
2372 * functionalities like reorder buffering, PN checking need to be
2373 * done in target. This determines maximum number of peers supported
2374 * by target in offload mode
2375 */
2376 __le32 num_offload_peers;
2377
2378 /* For target-based RX reordering */
2379 __le32 num_offload_reorder_bufs;
2380
2381 /* number of keys per peer */
2382 __le32 num_peer_keys;
2383
2384 /* total number of TX/RX data TIDs */
2385 __le32 num_tids;
2386
2387 /*
2388 * max skid for resolving hash collisions
2389 *
2390 * The address search table is sparse, so that if two MAC addresses
2391 * result in the same hash value, the second of these conflicting
2392 * entries can slide to the next index in the address search table,
2393 * and use it, if it is unoccupied. This ast_skid_limit parameter
2394 * specifies the upper bound on how many subsequent indices to search
2395 * over to find an unoccupied space.
2396 */
2397 __le32 ast_skid_limit;
2398
2399 /*
2400 * the nominal chain mask for transmit
2401 *
2402 * The chain mask may be modified dynamically, e.g. to operate AP
2403 * tx with a reduced number of chains if no clients are associated.
2404 * This configuration parameter specifies the nominal chain-mask that
2405 * should be used when not operating with a reduced set of tx chains.
2406 */
2407 __le32 tx_chain_mask;
2408
2409 /*
2410 * the nominal chain mask for receive
2411 *
2412 * The chain mask may be modified dynamically, e.g. for a client
2413 * to use a reduced number of chains for receive if the traffic to
2414 * the client is low enough that it doesn't require downlink MIMO
2415 * or antenna diversity.
2416 * This configuration parameter specifies the nominal chain-mask that
2417 * should be used when not operating with a reduced set of rx chains.
2418 */
2419 __le32 rx_chain_mask;
2420
2421 /*
2422 * what rx reorder timeout (ms) to use for the AC
2423 *
2424 * Each WMM access class (voice, video, best-effort, background) will
2425 * have its own timeout value to dictate how long to wait for missing
2426 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2427 * already been received.
2428 * This parameter specifies the timeout in milliseconds for each
2429 * class.
2430 */
2431 __le32 rx_timeout_pri_vi;
2432 __le32 rx_timeout_pri_vo;
2433 __le32 rx_timeout_pri_be;
2434 __le32 rx_timeout_pri_bk;
2435
2436 /*
2437 * what mode the rx should decap packets to
2438 *
2439 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2440 * THis setting also determines the default TX behavior, however TX
2441 * behavior can be modified on a per VAP basis during VAP init
2442 */
2443 __le32 rx_decap_mode;
2444
2445 /* what is the maximum number of scan requests that can be queued */
2446 __le32 scan_max_pending_reqs;
2447
2448 /* maximum VDEV that could use BMISS offload */
2449 __le32 bmiss_offload_max_vdev;
2450
2451 /* maximum VDEV that could use offload roaming */
2452 __le32 roam_offload_max_vdev;
2453
2454 /* maximum AP profiles that would push to offload roaming */
2455 __le32 roam_offload_max_ap_profiles;
2456
2457 /*
2458 * how many groups to use for mcast->ucast conversion
2459 *
2460 * The target's WAL maintains a table to hold information regarding
2461 * which peers belong to a given multicast group, so that if
2462 * multicast->unicast conversion is enabled, the target can convert
2463 * multicast tx frames to a series of unicast tx frames, to each
2464 * peer within the multicast group.
2465 This num_mcast_groups configuration parameter tells the target how
2466 * many multicast groups to provide storage for within its multicast
2467 * group membership table.
2468 */
2469 __le32 num_mcast_groups;
2470
2471 /*
2472 * size to alloc for the mcast membership table
2473 *
2474 * This num_mcast_table_elems configuration parameter tells the
2475 * target how many peer elements it needs to provide storage for in
2476 * its multicast group membership table.
2477 * These multicast group membership table elements are shared by the
2478 * multicast groups stored within the table.
2479 */
2480 __le32 num_mcast_table_elems;
2481
2482 /*
2483 * whether/how to do multicast->unicast conversion
2484 *
2485 * This configuration parameter specifies whether the target should
2486 * perform multicast --> unicast conversion on transmit, and if so,
2487 * what to do if it finds no entries in its multicast group
2488 * membership table for the multicast IP address in the tx frame.
2489 * Configuration value:
2490 * 0 -> Do not perform multicast to unicast conversion.
2491 * 1 -> Convert multicast frames to unicast, if the IP multicast
2492 * address from the tx frame is found in the multicast group
2493 * membership table. If the IP multicast address is not found,
2494 * drop the frame.
2495 * 2 -> Convert multicast frames to unicast, if the IP multicast
2496 * address from the tx frame is found in the multicast group
2497 * membership table. If the IP multicast address is not found,
2498 * transmit the frame as multicast.
2499 */
2500 __le32 mcast2ucast_mode;
2501
2502 /*
2503 * how much memory to allocate for a tx PPDU dbg log
2504 *
2505 * This parameter controls how much memory the target will allocate
2506 * to store a log of tx PPDU meta-information (how large the PPDU
2507 * was, when it was sent, whether it was successful, etc.)
2508 */
2509 __le32 tx_dbg_log_size;
2510
2511 /* how many AST entries to be allocated for WDS */
2512 __le32 num_wds_entries;
2513
2514 /*
2515 * MAC DMA burst size, e.g., For target PCI limit can be
2516 * 0 -default, 1 256B
2517 */
2518 __le32 dma_burst_size;
2519
2520 /*
2521 * Fixed delimiters to be inserted after every MPDU to
2522 * account for interface latency to avoid underrun.
2523 */
2524 __le32 mac_aggr_delim;
2525
2526 /*
2527 * determine whether target is responsible for detecting duplicate
2528 * non-aggregate MPDU and timing out stale fragments.
2529 *
2530 * A-MPDU reordering is always performed on the target.
2531 *
2532 * 0: target responsible for frag timeout and dup checking
2533 * 1: host responsible for frag timeout and dup checking
2534 */
2535 __le32 rx_skip_defrag_timeout_dup_detection_check;
2536
2537 /*
2538 * Configuration for VoW :
2539 * No of Video Nodes to be supported
2540 * and Max no of descriptors for each Video link (node).
2541 */
2542 __le32 vow_config;
2543
2544 /* maximum VDEV that could use GTK offload */
2545 __le32 gtk_offload_max_vdev;
2546
2547 /* Number of msdu descriptors target should use */
2548 __le32 num_msdu_desc;
2549
2550 /*
2551 * Max. number of Tx fragments per MSDU
2552 * This parameter controls the max number of Tx fragments per MSDU.
2553 * This is sent by the target as part of the WMI_SERVICE_READY event
2554 * and is overridden by the OS shim as required.
2555 */
2556 __le32 max_frag_entries;
2557 } __packed;
2558
2559 struct wmi_resource_config_10x {
2560 /* number of virtual devices (VAPs) to support */
2561 __le32 num_vdevs;
2562
2563 /* number of peer nodes to support */
2564 __le32 num_peers;
2565
2566 /* number of keys per peer */
2567 __le32 num_peer_keys;
2568
2569 /* total number of TX/RX data TIDs */
2570 __le32 num_tids;
2571
2572 /*
2573 * max skid for resolving hash collisions
2574 *
2575 * The address search table is sparse, so that if two MAC addresses
2576 * result in the same hash value, the second of these conflicting
2577 * entries can slide to the next index in the address search table,
2578 * and use it, if it is unoccupied. This ast_skid_limit parameter
2579 * specifies the upper bound on how many subsequent indices to search
2580 * over to find an unoccupied space.
2581 */
2582 __le32 ast_skid_limit;
2583
2584 /*
2585 * the nominal chain mask for transmit
2586 *
2587 * The chain mask may be modified dynamically, e.g. to operate AP
2588 * tx with a reduced number of chains if no clients are associated.
2589 * This configuration parameter specifies the nominal chain-mask that
2590 * should be used when not operating with a reduced set of tx chains.
2591 */
2592 __le32 tx_chain_mask;
2593
2594 /*
2595 * the nominal chain mask for receive
2596 *
2597 * The chain mask may be modified dynamically, e.g. for a client
2598 * to use a reduced number of chains for receive if the traffic to
2599 * the client is low enough that it doesn't require downlink MIMO
2600 * or antenna diversity.
2601 * This configuration parameter specifies the nominal chain-mask that
2602 * should be used when not operating with a reduced set of rx chains.
2603 */
2604 __le32 rx_chain_mask;
2605
2606 /*
2607 * what rx reorder timeout (ms) to use for the AC
2608 *
2609 * Each WMM access class (voice, video, best-effort, background) will
2610 * have its own timeout value to dictate how long to wait for missing
2611 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2612 * already been received.
2613 * This parameter specifies the timeout in milliseconds for each
2614 * class.
2615 */
2616 __le32 rx_timeout_pri_vi;
2617 __le32 rx_timeout_pri_vo;
2618 __le32 rx_timeout_pri_be;
2619 __le32 rx_timeout_pri_bk;
2620
2621 /*
2622 * what mode the rx should decap packets to
2623 *
2624 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2625 * THis setting also determines the default TX behavior, however TX
2626 * behavior can be modified on a per VAP basis during VAP init
2627 */
2628 __le32 rx_decap_mode;
2629
2630 /* what is the maximum number of scan requests that can be queued */
2631 __le32 scan_max_pending_reqs;
2632
2633 /* maximum VDEV that could use BMISS offload */
2634 __le32 bmiss_offload_max_vdev;
2635
2636 /* maximum VDEV that could use offload roaming */
2637 __le32 roam_offload_max_vdev;
2638
2639 /* maximum AP profiles that would push to offload roaming */
2640 __le32 roam_offload_max_ap_profiles;
2641
2642 /*
2643 * how many groups to use for mcast->ucast conversion
2644 *
2645 * The target's WAL maintains a table to hold information regarding
2646 * which peers belong to a given multicast group, so that if
2647 * multicast->unicast conversion is enabled, the target can convert
2648 * multicast tx frames to a series of unicast tx frames, to each
2649 * peer within the multicast group.
2650 This num_mcast_groups configuration parameter tells the target how
2651 * many multicast groups to provide storage for within its multicast
2652 * group membership table.
2653 */
2654 __le32 num_mcast_groups;
2655
2656 /*
2657 * size to alloc for the mcast membership table
2658 *
2659 * This num_mcast_table_elems configuration parameter tells the
2660 * target how many peer elements it needs to provide storage for in
2661 * its multicast group membership table.
2662 * These multicast group membership table elements are shared by the
2663 * multicast groups stored within the table.
2664 */
2665 __le32 num_mcast_table_elems;
2666
2667 /*
2668 * whether/how to do multicast->unicast conversion
2669 *
2670 * This configuration parameter specifies whether the target should
2671 * perform multicast --> unicast conversion on transmit, and if so,
2672 * what to do if it finds no entries in its multicast group
2673 * membership table for the multicast IP address in the tx frame.
2674 * Configuration value:
2675 * 0 -> Do not perform multicast to unicast conversion.
2676 * 1 -> Convert multicast frames to unicast, if the IP multicast
2677 * address from the tx frame is found in the multicast group
2678 * membership table. If the IP multicast address is not found,
2679 * drop the frame.
2680 * 2 -> Convert multicast frames to unicast, if the IP multicast
2681 * address from the tx frame is found in the multicast group
2682 * membership table. If the IP multicast address is not found,
2683 * transmit the frame as multicast.
2684 */
2685 __le32 mcast2ucast_mode;
2686
2687 /*
2688 * how much memory to allocate for a tx PPDU dbg log
2689 *
2690 * This parameter controls how much memory the target will allocate
2691 * to store a log of tx PPDU meta-information (how large the PPDU
2692 * was, when it was sent, whether it was successful, etc.)
2693 */
2694 __le32 tx_dbg_log_size;
2695
2696 /* how many AST entries to be allocated for WDS */
2697 __le32 num_wds_entries;
2698
2699 /*
2700 * MAC DMA burst size, e.g., For target PCI limit can be
2701 * 0 -default, 1 256B
2702 */
2703 __le32 dma_burst_size;
2704
2705 /*
2706 * Fixed delimiters to be inserted after every MPDU to
2707 * account for interface latency to avoid underrun.
2708 */
2709 __le32 mac_aggr_delim;
2710
2711 /*
2712 * determine whether target is responsible for detecting duplicate
2713 * non-aggregate MPDU and timing out stale fragments.
2714 *
2715 * A-MPDU reordering is always performed on the target.
2716 *
2717 * 0: target responsible for frag timeout and dup checking
2718 * 1: host responsible for frag timeout and dup checking
2719 */
2720 __le32 rx_skip_defrag_timeout_dup_detection_check;
2721
2722 /*
2723 * Configuration for VoW :
2724 * No of Video Nodes to be supported
2725 * and Max no of descriptors for each Video link (node).
2726 */
2727 __le32 vow_config;
2728
2729 /* Number of msdu descriptors target should use */
2730 __le32 num_msdu_desc;
2731
2732 /*
2733 * Max. number of Tx fragments per MSDU
2734 * This parameter controls the max number of Tx fragments per MSDU.
2735 * This is sent by the target as part of the WMI_SERVICE_READY event
2736 * and is overridden by the OS shim as required.
2737 */
2738 __le32 max_frag_entries;
2739 } __packed;
2740
2741 enum wmi_10_2_feature_mask {
2742 WMI_10_2_RX_BATCH_MODE = BIT(0),
2743 WMI_10_2_ATF_CONFIG = BIT(1),
2744 WMI_10_2_COEX_GPIO = BIT(3),
2745 WMI_10_2_BSS_CHAN_INFO = BIT(6),
2746 WMI_10_2_PEER_STATS = BIT(7),
2747 };
2748
2749 struct wmi_resource_config_10_2 {
2750 struct wmi_resource_config_10x common;
2751 __le32 max_peer_ext_stats;
2752 __le32 smart_ant_cap; /* 0-disable, 1-enable */
2753 __le32 bk_min_free;
2754 __le32 be_min_free;
2755 __le32 vi_min_free;
2756 __le32 vo_min_free;
2757 __le32 feature_mask;
2758 } __packed;
2759
2760 #define NUM_UNITS_IS_NUM_VDEVS BIT(0)
2761 #define NUM_UNITS_IS_NUM_PEERS BIT(1)
2762 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2)
2763
2764 struct wmi_resource_config_10_4 {
2765 /* Number of virtual devices (VAPs) to support */
2766 __le32 num_vdevs;
2767
2768 /* Number of peer nodes to support */
2769 __le32 num_peers;
2770
2771 /* Number of active peer nodes to support */
2772 __le32 num_active_peers;
2773
2774 /* In offload mode, target supports features like WOW, chatter and other
2775 * protocol offloads. In order to support them some functionalities like
2776 * reorder buffering, PN checking need to be done in target.
2777 * This determines maximum number of peers supported by target in
2778 * offload mode.
2779 */
2780 __le32 num_offload_peers;
2781
2782 /* Number of reorder buffers available for doing target based reorder
2783 * Rx reorder buffering
2784 */
2785 __le32 num_offload_reorder_buffs;
2786
2787 /* Number of keys per peer */
2788 __le32 num_peer_keys;
2789
2790 /* Total number of TX/RX data TIDs */
2791 __le32 num_tids;
2792
2793 /* Max skid for resolving hash collisions.
2794 * The address search table is sparse, so that if two MAC addresses
2795 * result in the same hash value, the second of these conflicting
2796 * entries can slide to the next index in the address search table,
2797 * and use it, if it is unoccupied. This ast_skid_limit parameter
2798 * specifies the upper bound on how many subsequent indices to search
2799 * over to find an unoccupied space.
2800 */
2801 __le32 ast_skid_limit;
2802
2803 /* The nominal chain mask for transmit.
2804 * The chain mask may be modified dynamically, e.g. to operate AP tx
2805 * with a reduced number of chains if no clients are associated.
2806 * This configuration parameter specifies the nominal chain-mask that
2807 * should be used when not operating with a reduced set of tx chains.
2808 */
2809 __le32 tx_chain_mask;
2810
2811 /* The nominal chain mask for receive.
2812 * The chain mask may be modified dynamically, e.g. for a client to use
2813 * a reduced number of chains for receive if the traffic to the client
2814 * is low enough that it doesn't require downlink MIMO or antenna
2815 * diversity. This configuration parameter specifies the nominal
2816 * chain-mask that should be used when not operating with a reduced
2817 * set of rx chains.
2818 */
2819 __le32 rx_chain_mask;
2820
2821 /* What rx reorder timeout (ms) to use for the AC.
2822 * Each WMM access class (voice, video, best-effort, background) will
2823 * have its own timeout value to dictate how long to wait for missing
2824 * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2825 * been received. This parameter specifies the timeout in milliseconds
2826 * for each class.
2827 */
2828 __le32 rx_timeout_pri[4];
2829
2830 /* What mode the rx should decap packets to.
2831 * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2832 * This setting also determines the default TX behavior, however TX
2833 * behavior can be modified on a per VAP basis during VAP init
2834 */
2835 __le32 rx_decap_mode;
2836
2837 __le32 scan_max_pending_req;
2838
2839 __le32 bmiss_offload_max_vdev;
2840
2841 __le32 roam_offload_max_vdev;
2842
2843 __le32 roam_offload_max_ap_profiles;
2844
2845 /* How many groups to use for mcast->ucast conversion.
2846 * The target's WAL maintains a table to hold information regarding
2847 * which peers belong to a given multicast group, so that if
2848 * multicast->unicast conversion is enabled, the target can convert
2849 * multicast tx frames to a series of unicast tx frames, to each peer
2850 * within the multicast group. This num_mcast_groups configuration
2851 * parameter tells the target how many multicast groups to provide
2852 * storage for within its multicast group membership table.
2853 */
2854 __le32 num_mcast_groups;
2855
2856 /* Size to alloc for the mcast membership table.
2857 * This num_mcast_table_elems configuration parameter tells the target
2858 * how many peer elements it needs to provide storage for in its
2859 * multicast group membership table. These multicast group membership
2860 * table elements are shared by the multicast groups stored within
2861 * the table.
2862 */
2863 __le32 num_mcast_table_elems;
2864
2865 /* Whether/how to do multicast->unicast conversion.
2866 * This configuration parameter specifies whether the target should
2867 * perform multicast --> unicast conversion on transmit, and if so,
2868 * what to do if it finds no entries in its multicast group membership
2869 * table for the multicast IP address in the tx frame.
2870 * Configuration value:
2871 * 0 -> Do not perform multicast to unicast conversion.
2872 * 1 -> Convert multicast frames to unicast, if the IP multicast address
2873 * from the tx frame is found in the multicast group membership
2874 * table. If the IP multicast address is not found, drop the frame
2875 * 2 -> Convert multicast frames to unicast, if the IP multicast address
2876 * from the tx frame is found in the multicast group membership
2877 * table. If the IP multicast address is not found, transmit the
2878 * frame as multicast.
2879 */
2880 __le32 mcast2ucast_mode;
2881
2882 /* How much memory to allocate for a tx PPDU dbg log.
2883 * This parameter controls how much memory the target will allocate to
2884 * store a log of tx PPDU meta-information (how large the PPDU was,
2885 * when it was sent, whether it was successful, etc.)
2886 */
2887 __le32 tx_dbg_log_size;
2888
2889 /* How many AST entries to be allocated for WDS */
2890 __le32 num_wds_entries;
2891
2892 /* MAC DMA burst size. 0 -default, 1 -256B */
2893 __le32 dma_burst_size;
2894
2895 /* Fixed delimiters to be inserted after every MPDU to account for
2896 * interface latency to avoid underrun.
2897 */
2898 __le32 mac_aggr_delim;
2899
2900 /* Determine whether target is responsible for detecting duplicate
2901 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2902 * is always performed on the target.
2903 *
2904 * 0: target responsible for frag timeout and dup checking
2905 * 1: host responsible for frag timeout and dup checking
2906 */
2907 __le32 rx_skip_defrag_timeout_dup_detection_check;
2908
2909 /* Configuration for VoW : No of Video nodes to be supported and max
2910 * no of descriptors for each video link (node).
2911 */
2912 __le32 vow_config;
2913
2914 /* Maximum vdev that could use gtk offload */
2915 __le32 gtk_offload_max_vdev;
2916
2917 /* Number of msdu descriptors target should use */
2918 __le32 num_msdu_desc;
2919
2920 /* Max number of tx fragments per MSDU.
2921 * This parameter controls the max number of tx fragments per MSDU.
2922 * This will passed by target as part of the WMI_SERVICE_READY event
2923 * and is overridden by the OS shim as required.
2924 */
2925 __le32 max_frag_entries;
2926
2927 /* Max number of extended peer stats.
2928 * This parameter controls the max number of peers for which extended
2929 * statistics are supported by target
2930 */
2931 __le32 max_peer_ext_stats;
2932
2933 /* Smart antenna capabilities information.
2934 * 1 - Smart antenna is enabled
2935 * 0 - Smart antenna is disabled
2936 * In future this can contain smart antenna specific capabilities.
2937 */
2938 __le32 smart_ant_cap;
2939
2940 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2941 * during init.
2942 */
2943 __le32 bk_minfree;
2944 __le32 be_minfree;
2945 __le32 vi_minfree;
2946 __le32 vo_minfree;
2947
2948 /* Rx batch mode capability.
2949 * 1 - Rx batch mode enabled
2950 * 0 - Rx batch mode disabled
2951 */
2952 __le32 rx_batchmode;
2953
2954 /* Thermal throttling capability.
2955 * 1 - Capable of thermal throttling
2956 * 0 - Not capable of thermal throttling
2957 */
2958 __le32 tt_support;
2959
2960 /* ATF configuration.
2961 * 1 - Enable ATF
2962 * 0 - Disable ATF
2963 */
2964 __le32 atf_config;
2965
2966 /* Configure padding to manage IP header un-alignment
2967 * 1 - Enable padding
2968 * 0 - Disable padding
2969 */
2970 __le32 iphdr_pad_config;
2971
2972 /* qwrap configuration (bits 15-0)
2973 * 1 - This is qwrap configuration
2974 * 0 - This is not qwrap
2975 *
2976 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
2977 * In order to get ack-RSSI reporting and to specify the tx-rate for
2978 * individual frames, this option must be enabled. This uses an extra
2979 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
2980 */
2981 __le32 qwrap_config;
2982 } __packed;
2983
2984 enum wmi_coex_version {
2985 WMI_NO_COEX_VERSION_SUPPORT = 0,
2986 /* 3 wire coex support*/
2987 WMI_COEX_VERSION_1 = 1,
2988 /* 2.5 wire coex support*/
2989 WMI_COEX_VERSION_2 = 2,
2990 /* 2.5 wire coex with duty cycle support */
2991 WMI_COEX_VERSION_3 = 3,
2992 /* 4 wire coex support*/
2993 WMI_COEX_VERSION_4 = 4,
2994 };
2995
2996 /**
2997 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
2998 * @WMI_10_4_LTEU_SUPPORT: LTEU config
2999 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
3000 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
3001 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
3002 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
3003 * @WMI_10_4_PEER_STATS: Per station stats
3004 * @WMI_10_4_VDEV_STATS: Per vdev stats
3005 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
3006 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
3007 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
3008 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
3009 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
3010 * enable/disable
3011 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY: Explicit TDLS mode enable/disable
3012 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
3013 * @WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT: Firmware supports Extended Peer
3014 * TID configuration for QoS related settings
3015 * @WMI_10_4_REPORT_AIRTIME: Firmware supports transmit airtime reporting
3016 */
3017 enum wmi_10_4_feature_mask {
3018 WMI_10_4_LTEU_SUPPORT = BIT(0),
3019 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1),
3020 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2),
3021 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3),
3022 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4),
3023 WMI_10_4_PEER_STATS = BIT(5),
3024 WMI_10_4_VDEV_STATS = BIT(6),
3025 WMI_10_4_TDLS = BIT(7),
3026 WMI_10_4_TDLS_OFFCHAN = BIT(8),
3027 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9),
3028 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10),
3029 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
3030 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12),
3031 WMI_10_4_TX_DATA_ACK_RSSI = BIT(16),
3032 WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17),
3033 WMI_10_4_REPORT_AIRTIME = BIT(18),
3034
3035 };
3036
3037 /* WMI_GPIO_CONFIG_CMDID */
3038 enum {
3039 WMI_GPIO_PULL_NONE,
3040 WMI_GPIO_PULL_UP,
3041 WMI_GPIO_PULL_DOWN,
3042 };
3043
3044 enum {
3045 WMI_GPIO_INTTYPE_DISABLE,
3046 WMI_GPIO_INTTYPE_RISING_EDGE,
3047 WMI_GPIO_INTTYPE_FALLING_EDGE,
3048 WMI_GPIO_INTTYPE_BOTH_EDGE,
3049 WMI_GPIO_INTTYPE_LEVEL_LOW,
3050 WMI_GPIO_INTTYPE_LEVEL_HIGH
3051 };
3052
3053 /* WMI_GPIO_CONFIG_CMDID */
3054 struct wmi_gpio_config_cmd {
3055 __le32 gpio_num; /* GPIO number to be setup */
3056 __le32 input; /* 0 - Output/ 1 - Input */
3057 __le32 pull_type; /* Pull type defined above */
3058 __le32 intr_mode; /* Interrupt mode defined above (Input) */
3059 } __packed;
3060
3061 /* WMI_GPIO_OUTPUT_CMDID */
3062 struct wmi_gpio_output_cmd {
3063 __le32 gpio_num; /* GPIO number to be setup */
3064 __le32 set; /* Set the GPIO pin*/
3065 } __packed;
3066
3067 /* WMI_GPIO_INPUT_EVENTID */
3068 struct wmi_gpio_input_event {
3069 __le32 gpio_num; /* GPIO number which changed state */
3070 } __packed;
3071
3072 struct wmi_ext_resource_config_10_4_cmd {
3073 /* contains enum wmi_host_platform_type */
3074 __le32 host_platform_config;
3075 /* see enum wmi_10_4_feature_mask */
3076 __le32 fw_feature_bitmap;
3077 /* WLAN priority GPIO number */
3078 __le32 wlan_gpio_priority;
3079 /* see enum wmi_coex_version */
3080 __le32 coex_version;
3081 /* COEX GPIO config */
3082 __le32 coex_gpio_pin1;
3083 __le32 coex_gpio_pin2;
3084 __le32 coex_gpio_pin3;
3085 /* number of vdevs allowed to perform tdls */
3086 __le32 num_tdls_vdevs;
3087 /* number of peers to track per TDLS vdev */
3088 __le32 num_tdls_conn_table_entries;
3089 /* number of tdls sleep sta supported */
3090 __le32 max_tdls_concurrent_sleep_sta;
3091 /* number of tdls buffer sta supported */
3092 __le32 max_tdls_concurrent_buffer_sta;
3093 };
3094
3095 /* structure describing host memory chunk. */
3096 struct host_memory_chunk {
3097 /* id of the request that is passed up in service ready */
3098 __le32 req_id;
3099 /* the physical address the memory chunk */
3100 __le32 ptr;
3101 /* size of the chunk */
3102 __le32 size;
3103 } __packed;
3104
3105 #define WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID 8
3106
3107 struct wmi_host_mem_chunks {
3108 __le32 count;
3109 /* some fw revisions require at least 1 chunk regardless of count */
3110 union {
3111 struct host_memory_chunk item;
3112 DECLARE_FLEX_ARRAY(struct host_memory_chunk, items);
3113 };
3114 } __packed;
3115
3116 struct wmi_init_cmd {
3117 struct wmi_resource_config resource_config;
3118 struct wmi_host_mem_chunks mem_chunks;
3119 } __packed;
3120
3121 /* _10x structure is from 10.X FW API */
3122 struct wmi_init_cmd_10x {
3123 struct wmi_resource_config_10x resource_config;
3124 struct wmi_host_mem_chunks mem_chunks;
3125 } __packed;
3126
3127 struct wmi_init_cmd_10_2 {
3128 struct wmi_resource_config_10_2 resource_config;
3129 struct wmi_host_mem_chunks mem_chunks;
3130 } __packed;
3131
3132 struct wmi_init_cmd_10_4 {
3133 struct wmi_resource_config_10_4 resource_config;
3134 struct wmi_host_mem_chunks mem_chunks;
3135 } __packed;
3136
3137 struct wmi_chan_list_entry {
3138 __le16 freq;
3139 u8 phy_mode; /* valid for 10.2 only */
3140 u8 reserved;
3141 } __packed;
3142
3143 /* TLV for channel list */
3144 struct wmi_chan_list {
3145 __le32 tag; /* WMI_CHAN_LIST_TAG */
3146 __le32 num_chan;
3147 struct wmi_chan_list_entry channel_list[];
3148 } __packed;
3149
3150 struct wmi_bssid_list {
3151 __le32 tag; /* WMI_BSSID_LIST_TAG */
3152 __le32 num_bssid;
3153 struct wmi_mac_addr bssid_list[];
3154 } __packed;
3155
3156 struct wmi_ie_data {
3157 __le32 tag; /* WMI_IE_TAG */
3158 __le32 ie_len;
3159 u8 ie_data[];
3160 } __packed;
3161
3162 struct wmi_ssid {
3163 __le32 ssid_len;
3164 u8 ssid[32];
3165 } __packed;
3166
3167 struct wmi_ssid_list {
3168 __le32 tag; /* WMI_SSID_LIST_TAG */
3169 __le32 num_ssids;
3170 struct wmi_ssid ssids[];
3171 } __packed;
3172
3173 /* prefix used by scan requestor ids on the host */
3174 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
3175
3176 /* prefix used by scan request ids generated on the host */
3177 /* host cycles through the lower 12 bits to generate ids */
3178 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
3179
3180 #define WLAN_SCAN_PARAMS_MAX_SSID 16
3181 #define WLAN_SCAN_PARAMS_MAX_BSSID 4
3182 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256
3183
3184 /* Values lower than this may be refused by some firmware revisions with a scan
3185 * completion with a timedout reason.
3186 */
3187 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
3188
3189 /* Scan priority numbers must be sequential, starting with 0 */
3190 enum wmi_scan_priority {
3191 WMI_SCAN_PRIORITY_VERY_LOW = 0,
3192 WMI_SCAN_PRIORITY_LOW,
3193 WMI_SCAN_PRIORITY_MEDIUM,
3194 WMI_SCAN_PRIORITY_HIGH,
3195 WMI_SCAN_PRIORITY_VERY_HIGH,
3196 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */
3197 };
3198
3199 struct wmi_start_scan_common {
3200 /* Scan ID */
3201 __le32 scan_id;
3202 /* Scan requestor ID */
3203 __le32 scan_req_id;
3204 /* VDEV id(interface) that is requesting scan */
3205 __le32 vdev_id;
3206 /* Scan Priority, input to scan scheduler */
3207 __le32 scan_priority;
3208 /* Scan events subscription */
3209 __le32 notify_scan_events;
3210 /* dwell time in msec on active channels */
3211 __le32 dwell_time_active;
3212 /* dwell time in msec on passive channels */
3213 __le32 dwell_time_passive;
3214 /*
3215 * min time in msec on the BSS channel,only valid if at least one
3216 * VDEV is active
3217 */
3218 __le32 min_rest_time;
3219 /*
3220 * max rest time in msec on the BSS channel,only valid if at least
3221 * one VDEV is active
3222 */
3223 /*
3224 * the scanner will rest on the bss channel at least min_rest_time
3225 * after min_rest_time the scanner will start checking for tx/rx
3226 * activity on all VDEVs. if there is no activity the scanner will
3227 * switch to off channel. if there is activity the scanner will let
3228 * the radio on the bss channel until max_rest_time expires.at
3229 * max_rest_time scanner will switch to off channel irrespective of
3230 * activity. activity is determined by the idle_time parameter.
3231 */
3232 __le32 max_rest_time;
3233 /*
3234 * time before sending next set of probe requests.
3235 * The scanner keeps repeating probe requests transmission with
3236 * period specified by repeat_probe_time.
3237 * The number of probe requests specified depends on the ssid_list
3238 * and bssid_list
3239 */
3240 __le32 repeat_probe_time;
3241 /* time in msec between 2 consecutive probe requests with in a set. */
3242 __le32 probe_spacing_time;
3243 /*
3244 * data inactivity time in msec on bss channel that will be used by
3245 * scanner for measuring the inactivity.
3246 */
3247 __le32 idle_time;
3248 /* maximum time in msec allowed for scan */
3249 __le32 max_scan_time;
3250 /*
3251 * delay in msec before sending first probe request after switching
3252 * to a channel
3253 */
3254 __le32 probe_delay;
3255 /* Scan control flags */
3256 __le32 scan_ctrl_flags;
3257 } __packed;
3258
3259 struct wmi_start_scan_cmd {
3260 struct wmi_start_scan_common common;
3261 __le32 burst_duration_ms;
3262 u8 tlvs[];
3263 } __packed;
3264
3265 /* This is the definition from 10.X firmware branch */
3266 struct wmi_10x_start_scan_cmd {
3267 struct wmi_start_scan_common common;
3268 u8 tlvs[];
3269 } __packed;
3270
3271 struct wmi_ssid_arg {
3272 int len;
3273 const u8 *ssid;
3274 };
3275
3276 struct wmi_bssid_arg {
3277 const u8 *bssid;
3278 };
3279
3280 struct wmi_start_scan_arg {
3281 u32 scan_id;
3282 u32 scan_req_id;
3283 u32 vdev_id;
3284 u32 scan_priority;
3285 u32 notify_scan_events;
3286 u32 dwell_time_active;
3287 u32 dwell_time_passive;
3288 u32 min_rest_time;
3289 u32 max_rest_time;
3290 u32 repeat_probe_time;
3291 u32 probe_spacing_time;
3292 u32 idle_time;
3293 u32 max_scan_time;
3294 u32 probe_delay;
3295 u32 scan_ctrl_flags;
3296 u32 burst_duration_ms;
3297
3298 u32 ie_len;
3299 u32 n_channels;
3300 u32 n_ssids;
3301 u32 n_bssids;
3302
3303 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
3304 u16 channels[64];
3305 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
3306 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
3307 struct wmi_mac_addr mac_addr;
3308 struct wmi_mac_addr mac_mask;
3309 };
3310
3311 /* scan control flags */
3312
3313 /* passively scan all channels including active channels */
3314 #define WMI_SCAN_FLAG_PASSIVE 0x1
3315 /* add wild card ssid probe request even though ssid_list is specified. */
3316 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
3317 /* add cck rates to rates/xrate ie for the generated probe request */
3318 #define WMI_SCAN_ADD_CCK_RATES 0x4
3319 /* add ofdm rates to rates/xrate ie for the generated probe request */
3320 #define WMI_SCAN_ADD_OFDM_RATES 0x8
3321 /* To enable indication of Chan load and Noise floor to host */
3322 #define WMI_SCAN_CHAN_STAT_EVENT 0x10
3323 /* Filter Probe request frames */
3324 #define WMI_SCAN_FILTER_PROBE_REQ 0x20
3325 /* When set, DFS channels will not be scanned */
3326 #define WMI_SCAN_BYPASS_DFS_CHN 0x40
3327 /* Different FW scan engine may choose to bail out on errors.
3328 * Allow the driver to have influence over that.
3329 */
3330 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
3331
3332 /* Use random MAC address for TA for Probe Request frame and add
3333 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
3334 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
3335 */
3336 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000
3337
3338 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
3339 #define WMI_SCAN_CLASS_MASK 0xFF000000
3340
3341 enum wmi_stop_scan_type {
3342 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */
3343 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */
3344 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */
3345 };
3346
3347 struct wmi_stop_scan_cmd {
3348 __le32 scan_req_id;
3349 __le32 scan_id;
3350 __le32 req_type;
3351 __le32 vdev_id;
3352 } __packed;
3353
3354 struct wmi_stop_scan_arg {
3355 u32 req_id;
3356 enum wmi_stop_scan_type req_type;
3357 union {
3358 u32 scan_id;
3359 u32 vdev_id;
3360 } u;
3361 };
3362
3363 struct wmi_scan_chan_list_cmd {
3364 __le32 num_scan_chans;
3365 struct wmi_channel chan_info[];
3366 } __packed;
3367
3368 struct wmi_scan_chan_list_arg {
3369 u32 n_channels;
3370 struct wmi_channel_arg *channels;
3371 };
3372
3373 enum wmi_bss_filter {
3374 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */
3375 WMI_BSS_FILTER_ALL, /* all beacons forwarded */
3376 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */
3377 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
3378 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */
3379 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */
3380 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */
3381 WMI_BSS_FILTER_LAST_BSS, /* marker only */
3382 };
3383
3384 enum wmi_scan_event_type {
3385 WMI_SCAN_EVENT_STARTED = BIT(0),
3386 WMI_SCAN_EVENT_COMPLETED = BIT(1),
3387 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2),
3388 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3),
3389 WMI_SCAN_EVENT_DEQUEUED = BIT(4),
3390 /* possibly by high-prio scan */
3391 WMI_SCAN_EVENT_PREEMPTED = BIT(5),
3392 WMI_SCAN_EVENT_START_FAILED = BIT(6),
3393 WMI_SCAN_EVENT_RESTARTED = BIT(7),
3394 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
3395 WMI_SCAN_EVENT_MAX = BIT(15),
3396 };
3397
3398 enum wmi_scan_completion_reason {
3399 WMI_SCAN_REASON_COMPLETED,
3400 WMI_SCAN_REASON_CANCELLED,
3401 WMI_SCAN_REASON_PREEMPTED,
3402 WMI_SCAN_REASON_TIMEDOUT,
3403 WMI_SCAN_REASON_INTERNAL_FAILURE,
3404 WMI_SCAN_REASON_MAX,
3405 };
3406
3407 struct wmi_scan_event {
3408 __le32 event_type; /* %WMI_SCAN_EVENT_ */
3409 __le32 reason; /* %WMI_SCAN_REASON_ */
3410 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
3411 __le32 scan_req_id;
3412 __le32 scan_id;
3413 __le32 vdev_id;
3414 } __packed;
3415
3416 /*
3417 * This defines how much headroom is kept in the
3418 * receive frame between the descriptor and the
3419 * payload, in order for the WMI PHY error and
3420 * management handler to insert header contents.
3421 *
3422 * This is in bytes.
3423 */
3424 #define WMI_MGMT_RX_HDR_HEADROOM 52
3425
3426 /*
3427 * This event will be used for sending scan results
3428 * as well as rx mgmt frames to the host. The rx buffer
3429 * will be sent as part of this WMI event. It would be a
3430 * good idea to pass all the fields in the RX status
3431 * descriptor up to the host.
3432 */
3433 struct wmi_mgmt_rx_hdr_v1 {
3434 __le32 channel;
3435 __le32 snr;
3436 __le32 rate;
3437 __le32 phy_mode;
3438 __le32 buf_len;
3439 __le32 status; /* %WMI_RX_STATUS_ */
3440 } __packed;
3441
3442 struct wmi_mgmt_rx_hdr_v2 {
3443 struct wmi_mgmt_rx_hdr_v1 v1;
3444 __le32 rssi_ctl[4];
3445 } __packed;
3446
3447 struct wmi_mgmt_rx_event_v1 {
3448 struct wmi_mgmt_rx_hdr_v1 hdr;
3449 u8 buf[];
3450 } __packed;
3451
3452 struct wmi_mgmt_rx_event_v2 {
3453 struct wmi_mgmt_rx_hdr_v2 hdr;
3454 u8 buf[];
3455 } __packed;
3456
3457 struct wmi_10_4_mgmt_rx_hdr {
3458 __le32 channel;
3459 __le32 snr;
3460 u8 rssi_ctl[4];
3461 __le32 rate;
3462 __le32 phy_mode;
3463 __le32 buf_len;
3464 __le32 status;
3465 } __packed;
3466
3467 struct wmi_10_4_mgmt_rx_event {
3468 struct wmi_10_4_mgmt_rx_hdr hdr;
3469 u8 buf[];
3470 } __packed;
3471
3472 struct wmi_mgmt_rx_ext_info {
3473 __le64 rx_mac_timestamp;
3474 } __packed __aligned(4);
3475
3476 #define WMI_RX_STATUS_OK 0x00
3477 #define WMI_RX_STATUS_ERR_CRC 0x01
3478 #define WMI_RX_STATUS_ERR_DECRYPT 0x08
3479 #define WMI_RX_STATUS_ERR_MIC 0x10
3480 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20
3481 /* Extension data at the end of mgmt frame */
3482 #define WMI_RX_STATUS_EXT_INFO 0x40
3483
3484 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26
3485 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24
3486 #define PHY_ERROR_GEN_RADAR 0x05
3487
3488 #define PHY_ERROR_10_4_RADAR_MASK 0x4
3489 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000
3490
3491 enum phy_err_type {
3492 PHY_ERROR_UNKNOWN,
3493 PHY_ERROR_SPECTRAL_SCAN,
3494 PHY_ERROR_FALSE_RADAR_EXT,
3495 PHY_ERROR_RADAR
3496 };
3497
3498 struct wmi_phyerr {
3499 __le32 tsf_timestamp;
3500 __le16 freq1;
3501 __le16 freq2;
3502 u8 rssi_combined;
3503 u8 chan_width_mhz;
3504 u8 phy_err_code;
3505 u8 rsvd0;
3506 __le32 rssi_chains[4];
3507 __le16 nf_chains[4];
3508 __le32 buf_len;
3509 u8 buf[];
3510 } __packed;
3511
3512 struct wmi_phyerr_event {
3513 __le32 num_phyerrs;
3514 __le32 tsf_l32;
3515 __le32 tsf_u32;
3516
3517 /* array of struct wmi_phyerr */
3518 u8 phyerrs[];
3519 } __packed;
3520
3521 struct wmi_10_4_phyerr_event {
3522 __le32 tsf_l32;
3523 __le32 tsf_u32;
3524 __le16 freq1;
3525 __le16 freq2;
3526 u8 rssi_combined;
3527 u8 chan_width_mhz;
3528 u8 phy_err_code;
3529 u8 rsvd0;
3530 __le32 rssi_chains[4];
3531 __le16 nf_chains[4];
3532 __le32 phy_err_mask[2];
3533 __le32 tsf_timestamp;
3534 __le32 buf_len;
3535 u8 buf[];
3536 } __packed;
3537
3538 struct wmi_radar_found_info {
3539 __le32 pri_min;
3540 __le32 pri_max;
3541 __le32 width_min;
3542 __le32 width_max;
3543 __le32 sidx_min;
3544 __le32 sidx_max;
3545 } __packed;
3546
3547 enum wmi_radar_confirmation_status {
3548 /* Detected radar was due to SW pulses */
3549 WMI_SW_RADAR_DETECTED = 0,
3550
3551 WMI_RADAR_DETECTION_FAIL = 1,
3552
3553 /* Real radar detected */
3554 WMI_HW_RADAR_DETECTED = 2,
3555 };
3556
3557 #define PHYERR_TLV_SIG 0xBB
3558 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB
3559 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8
3560 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9
3561
3562 struct phyerr_radar_report {
3563 __le32 reg0; /* RADAR_REPORT_REG0_* */
3564 __le32 reg1; /* RADAR_REPORT_REG1_* */
3565 } __packed;
3566
3567 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000
3568 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31
3569
3570 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000
3571 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30
3572
3573 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000
3574 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20
3575
3576 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000
3577 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16
3578
3579 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00
3580 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10
3581
3582 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF
3583 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0
3584
3585 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000
3586 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31
3587
3588 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000
3589 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24
3590
3591 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000
3592 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16
3593
3594 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00
3595 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8
3596
3597 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF
3598 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0
3599
3600 struct phyerr_fft_report {
3601 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3602 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3603 } __packed;
3604
3605 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000
3606 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23
3607
3608 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000
3609 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14
3610
3611 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000
3612 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12
3613
3614 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF
3615 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0
3616
3617 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000
3618 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26
3619
3620 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000
3621 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18
3622
3623 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00
3624 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8
3625
3626 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF
3627 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0
3628
3629 struct phyerr_tlv {
3630 __le16 len;
3631 u8 tag;
3632 u8 sig;
3633 } __packed;
3634
3635 #define DFS_RSSI_POSSIBLY_FALSE 50
3636 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40
3637
3638 struct wmi_mgmt_tx_hdr {
3639 __le32 vdev_id;
3640 struct wmi_mac_addr peer_macaddr;
3641 __le32 tx_rate;
3642 __le32 tx_power;
3643 __le32 buf_len;
3644 } __packed;
3645
3646 struct wmi_mgmt_tx_cmd {
3647 struct wmi_mgmt_tx_hdr hdr;
3648 u8 buf[];
3649 } __packed;
3650
3651 struct wmi_echo_event {
3652 __le32 value;
3653 } __packed;
3654
3655 struct wmi_echo_cmd {
3656 __le32 value;
3657 } __packed;
3658
3659 struct wmi_pdev_set_regdomain_cmd {
3660 __le32 reg_domain;
3661 __le32 reg_domain_2G;
3662 __le32 reg_domain_5G;
3663 __le32 conformance_test_limit_2G;
3664 __le32 conformance_test_limit_5G;
3665 } __packed;
3666
3667 enum wmi_dfs_region {
3668 /* Uninitialized dfs domain */
3669 WMI_UNINIT_DFS_DOMAIN = 0,
3670
3671 /* FCC3 dfs domain */
3672 WMI_FCC_DFS_DOMAIN = 1,
3673
3674 /* ETSI dfs domain */
3675 WMI_ETSI_DFS_DOMAIN = 2,
3676
3677 /*Japan dfs domain */
3678 WMI_MKK4_DFS_DOMAIN = 3,
3679 };
3680
3681 struct wmi_pdev_set_regdomain_cmd_10x {
3682 __le32 reg_domain;
3683 __le32 reg_domain_2G;
3684 __le32 reg_domain_5G;
3685 __le32 conformance_test_limit_2G;
3686 __le32 conformance_test_limit_5G;
3687
3688 /* dfs domain from wmi_dfs_region */
3689 __le32 dfs_domain;
3690 } __packed;
3691
3692 /* Command to set/unset chip in quiet mode */
3693 struct wmi_pdev_set_quiet_cmd {
3694 /* period in TUs */
3695 __le32 period;
3696
3697 /* duration in TUs */
3698 __le32 duration;
3699
3700 /* offset in TUs */
3701 __le32 next_start;
3702
3703 /* enable/disable */
3704 __le32 enabled;
3705 } __packed;
3706
3707 /*
3708 * 802.11g protection mode.
3709 */
3710 enum ath10k_protmode {
3711 ATH10K_PROT_NONE = 0, /* no protection */
3712 ATH10K_PROT_CTSONLY = 1, /* CTS to self */
3713 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */
3714 };
3715
3716 enum wmi_rtscts_profile {
3717 WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3718 WMI_RTSCTS_FOR_SECOND_RATESERIES,
3719 WMI_RTSCTS_ACROSS_SW_RETRIES
3720 };
3721
3722 #define WMI_RTSCTS_ENABLED 1
3723 #define WMI_RTSCTS_SET_MASK 0x0f
3724 #define WMI_RTSCTS_SET_LSB 0
3725
3726 #define WMI_RTSCTS_PROFILE_MASK 0xf0
3727 #define WMI_RTSCTS_PROFILE_LSB 4
3728
3729 enum wmi_beacon_gen_mode {
3730 WMI_BEACON_STAGGERED_MODE = 0,
3731 WMI_BEACON_BURST_MODE = 1
3732 };
3733
3734 enum wmi_csa_event_ies_present_flag {
3735 WMI_CSA_IE_PRESENT = 0x00000001,
3736 WMI_XCSA_IE_PRESENT = 0x00000002,
3737 WMI_WBW_IE_PRESENT = 0x00000004,
3738 WMI_CSWARP_IE_PRESENT = 0x00000008,
3739 };
3740
3741 /* wmi CSA receive event from beacon frame */
3742 struct wmi_csa_event {
3743 __le32 i_fc_dur;
3744 /* Bit 0-15: FC */
3745 /* Bit 16-31: DUR */
3746 struct wmi_mac_addr i_addr1;
3747 struct wmi_mac_addr i_addr2;
3748 __le32 csa_ie[2];
3749 __le32 xcsa_ie[2];
3750 __le32 wb_ie[2];
3751 __le32 cswarp_ie;
3752 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3753 } __packed;
3754
3755 /* the definition of different PDEV parameters */
3756 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3757 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3758 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
3759
3760 struct wmi_pdev_param_map {
3761 u32 tx_chain_mask;
3762 u32 rx_chain_mask;
3763 u32 txpower_limit2g;
3764 u32 txpower_limit5g;
3765 u32 txpower_scale;
3766 u32 beacon_gen_mode;
3767 u32 beacon_tx_mode;
3768 u32 resmgr_offchan_mode;
3769 u32 protection_mode;
3770 u32 dynamic_bw;
3771 u32 non_agg_sw_retry_th;
3772 u32 agg_sw_retry_th;
3773 u32 sta_kickout_th;
3774 u32 ac_aggrsize_scaling;
3775 u32 ltr_enable;
3776 u32 ltr_ac_latency_be;
3777 u32 ltr_ac_latency_bk;
3778 u32 ltr_ac_latency_vi;
3779 u32 ltr_ac_latency_vo;
3780 u32 ltr_ac_latency_timeout;
3781 u32 ltr_sleep_override;
3782 u32 ltr_rx_override;
3783 u32 ltr_tx_activity_timeout;
3784 u32 l1ss_enable;
3785 u32 dsleep_enable;
3786 u32 pcielp_txbuf_flush;
3787 u32 pcielp_txbuf_watermark;
3788 u32 pcielp_txbuf_tmo_en;
3789 u32 pcielp_txbuf_tmo_value;
3790 u32 pdev_stats_update_period;
3791 u32 vdev_stats_update_period;
3792 u32 peer_stats_update_period;
3793 u32 bcnflt_stats_update_period;
3794 u32 pmf_qos;
3795 u32 arp_ac_override;
3796 u32 dcs;
3797 u32 ani_enable;
3798 u32 ani_poll_period;
3799 u32 ani_listen_period;
3800 u32 ani_ofdm_level;
3801 u32 ani_cck_level;
3802 u32 dyntxchain;
3803 u32 proxy_sta;
3804 u32 idle_ps_config;
3805 u32 power_gating_sleep;
3806 u32 fast_channel_reset;
3807 u32 burst_dur;
3808 u32 burst_enable;
3809 u32 cal_period;
3810 u32 aggr_burst;
3811 u32 rx_decap_mode;
3812 u32 smart_antenna_default_antenna;
3813 u32 igmpmld_override;
3814 u32 igmpmld_tid;
3815 u32 antenna_gain;
3816 u32 rx_filter;
3817 u32 set_mcast_to_ucast_tid;
3818 u32 proxy_sta_mode;
3819 u32 set_mcast2ucast_mode;
3820 u32 set_mcast2ucast_buffer;
3821 u32 remove_mcast2ucast_buffer;
3822 u32 peer_sta_ps_statechg_enable;
3823 u32 igmpmld_ac_override;
3824 u32 block_interbss;
3825 u32 set_disable_reset_cmdid;
3826 u32 set_msdu_ttl_cmdid;
3827 u32 set_ppdu_duration_cmdid;
3828 u32 txbf_sound_period_cmdid;
3829 u32 set_promisc_mode_cmdid;
3830 u32 set_burst_mode_cmdid;
3831 u32 en_stats;
3832 u32 mu_group_policy;
3833 u32 noise_detection;
3834 u32 noise_threshold;
3835 u32 dpd_enable;
3836 u32 set_mcast_bcast_echo;
3837 u32 atf_strict_sch;
3838 u32 atf_sched_duration;
3839 u32 ant_plzn;
3840 u32 mgmt_retry_limit;
3841 u32 sensitivity_level;
3842 u32 signed_txpower_2g;
3843 u32 signed_txpower_5g;
3844 u32 enable_per_tid_amsdu;
3845 u32 enable_per_tid_ampdu;
3846 u32 cca_threshold;
3847 u32 rts_fixed_rate;
3848 u32 pdev_reset;
3849 u32 wapi_mbssid_offset;
3850 u32 arp_srcaddr;
3851 u32 arp_dstaddr;
3852 u32 enable_btcoex;
3853 u32 rfkill_config;
3854 u32 rfkill_enable;
3855 u32 peer_stats_info_enable;
3856 };
3857
3858 #define WMI_PDEV_PARAM_UNSUPPORTED 0
3859
3860 enum wmi_pdev_param {
3861 /* TX chain mask */
3862 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3863 /* RX chain mask */
3864 WMI_PDEV_PARAM_RX_CHAIN_MASK,
3865 /* TX power limit for 2G Radio */
3866 WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3867 /* TX power limit for 5G Radio */
3868 WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3869 /* TX power scale */
3870 WMI_PDEV_PARAM_TXPOWER_SCALE,
3871 /* Beacon generation mode . 0: host, 1: target */
3872 WMI_PDEV_PARAM_BEACON_GEN_MODE,
3873 /* Beacon generation mode . 0: staggered 1: bursted */
3874 WMI_PDEV_PARAM_BEACON_TX_MODE,
3875 /*
3876 * Resource manager off chan mode .
3877 * 0: turn off offchan mode. 1: turn on offchan mode
3878 */
3879 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3880 /*
3881 * Protection mode:
3882 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3883 */
3884 WMI_PDEV_PARAM_PROTECTION_MODE,
3885 /*
3886 * Dynamic bandwidth - 0: disable, 1: enable
3887 *
3888 * When enabled HW rate control tries different bandwidths when
3889 * retransmitting frames.
3890 */
3891 WMI_PDEV_PARAM_DYNAMIC_BW,
3892 /* Non aggregate/ 11g sw retry threshold.0-disable */
3893 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3894 /* aggregate sw retry threshold. 0-disable*/
3895 WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3896 /* Station kickout threshold (non of consecutive failures).0-disable */
3897 WMI_PDEV_PARAM_STA_KICKOUT_TH,
3898 /* Aggerate size scaling configuration per AC */
3899 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3900 /* LTR enable */
3901 WMI_PDEV_PARAM_LTR_ENABLE,
3902 /* LTR latency for BE, in us */
3903 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3904 /* LTR latency for BK, in us */
3905 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3906 /* LTR latency for VI, in us */
3907 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3908 /* LTR latency for VO, in us */
3909 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3910 /* LTR AC latency timeout, in ms */
3911 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3912 /* LTR platform latency override, in us */
3913 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3914 /* LTR-RX override, in us */
3915 WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3916 /* Tx activity timeout for LTR, in us */
3917 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3918 /* L1SS state machine enable */
3919 WMI_PDEV_PARAM_L1SS_ENABLE,
3920 /* Deep sleep state machine enable */
3921 WMI_PDEV_PARAM_DSLEEP_ENABLE,
3922 /* RX buffering flush enable */
3923 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3924 /* RX buffering matermark */
3925 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3926 /* RX buffering timeout enable */
3927 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3928 /* RX buffering timeout value */
3929 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3930 /* pdev level stats update period in ms */
3931 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3932 /* vdev level stats update period in ms */
3933 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3934 /* peer level stats update period in ms */
3935 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3936 /* beacon filter status update period */
3937 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3938 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3939 WMI_PDEV_PARAM_PMF_QOS,
3940 /* Access category on which ARP frames are sent */
3941 WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3942 /* DCS configuration */
3943 WMI_PDEV_PARAM_DCS,
3944 /* Enable/Disable ANI on target */
3945 WMI_PDEV_PARAM_ANI_ENABLE,
3946 /* configure the ANI polling period */
3947 WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3948 /* configure the ANI listening period */
3949 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3950 /* configure OFDM immunity level */
3951 WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3952 /* configure CCK immunity level */
3953 WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3954 /* Enable/Disable CDD for 1x1 STAs in rate control module */
3955 WMI_PDEV_PARAM_DYNTXCHAIN,
3956 /* Enable/Disable proxy STA */
3957 WMI_PDEV_PARAM_PROXY_STA,
3958 /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3959 WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3960 /* Enable/Disable power gating sleep */
3961 WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3962 };
3963
3964 enum wmi_10x_pdev_param {
3965 /* TX chian mask */
3966 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3967 /* RX chian mask */
3968 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3969 /* TX power limit for 2G Radio */
3970 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3971 /* TX power limit for 5G Radio */
3972 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3973 /* TX power scale */
3974 WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3975 /* Beacon generation mode . 0: host, 1: target */
3976 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3977 /* Beacon generation mode . 0: staggered 1: bursted */
3978 WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3979 /*
3980 * Resource manager off chan mode .
3981 * 0: turn off offchan mode. 1: turn on offchan mode
3982 */
3983 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3984 /*
3985 * Protection mode:
3986 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3987 */
3988 WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3989 /* Dynamic bandwidth 0: disable 1: enable */
3990 WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3991 /* Non aggregate/ 11g sw retry threshold.0-disable */
3992 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3993 /* aggregate sw retry threshold. 0-disable*/
3994 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3995 /* Station kickout threshold (non of consecutive failures).0-disable */
3996 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3997 /* Aggerate size scaling configuration per AC */
3998 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3999 /* LTR enable */
4000 WMI_10X_PDEV_PARAM_LTR_ENABLE,
4001 /* LTR latency for BE, in us */
4002 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
4003 /* LTR latency for BK, in us */
4004 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
4005 /* LTR latency for VI, in us */
4006 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
4007 /* LTR latency for VO, in us */
4008 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
4009 /* LTR AC latency timeout, in ms */
4010 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4011 /* LTR platform latency override, in us */
4012 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4013 /* LTR-RX override, in us */
4014 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
4015 /* Tx activity timeout for LTR, in us */
4016 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4017 /* L1SS state machine enable */
4018 WMI_10X_PDEV_PARAM_L1SS_ENABLE,
4019 /* Deep sleep state machine enable */
4020 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
4021 /* pdev level stats update period in ms */
4022 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4023 /* vdev level stats update period in ms */
4024 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4025 /* peer level stats update period in ms */
4026 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4027 /* beacon filter status update period */
4028 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4029 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
4030 WMI_10X_PDEV_PARAM_PMF_QOS,
4031 /* Access category on which ARP and DHCP frames are sent */
4032 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
4033 /* DCS configuration */
4034 WMI_10X_PDEV_PARAM_DCS,
4035 /* Enable/Disable ANI on target */
4036 WMI_10X_PDEV_PARAM_ANI_ENABLE,
4037 /* configure the ANI polling period */
4038 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
4039 /* configure the ANI listening period */
4040 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
4041 /* configure OFDM immunity level */
4042 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
4043 /* configure CCK immunity level */
4044 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
4045 /* Enable/Disable CDD for 1x1 STAs in rate control module */
4046 WMI_10X_PDEV_PARAM_DYNTXCHAIN,
4047 /* Enable/Disable Fast channel reset*/
4048 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
4049 /* Set Bursting DUR */
4050 WMI_10X_PDEV_PARAM_BURST_DUR,
4051 /* Set Bursting Enable*/
4052 WMI_10X_PDEV_PARAM_BURST_ENABLE,
4053
4054 /* following are available as of firmware 10.2 */
4055 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4056 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
4057 WMI_10X_PDEV_PARAM_IGMPMLD_TID,
4058 WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
4059 WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
4060 WMI_10X_PDEV_PARAM_RX_FILTER,
4061 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
4062 WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
4063 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4064 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4065 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4066 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
4067 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
4068 WMI_10X_PDEV_PARAM_CAL_PERIOD,
4069 WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,
4070 WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,
4071 WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4072 WMI_10X_PDEV_PARAM_PDEV_RESET
4073 };
4074
4075 enum wmi_10_4_pdev_param {
4076 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
4077 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
4078 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
4079 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
4080 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
4081 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
4082 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
4083 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
4084 WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
4085 WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
4086 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
4087 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
4088 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
4089 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
4090 WMI_10_4_PDEV_PARAM_LTR_ENABLE,
4091 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
4092 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
4093 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
4094 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
4095 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4096 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4097 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
4098 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4099 WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
4100 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
4101 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
4102 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
4103 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
4104 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
4105 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4106 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4107 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4108 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4109 WMI_10_4_PDEV_PARAM_PMF_QOS,
4110 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
4111 WMI_10_4_PDEV_PARAM_DCS,
4112 WMI_10_4_PDEV_PARAM_ANI_ENABLE,
4113 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
4114 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
4115 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
4116 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
4117 WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
4118 WMI_10_4_PDEV_PARAM_PROXY_STA,
4119 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
4120 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
4121 WMI_10_4_PDEV_PARAM_AGGR_BURST,
4122 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
4123 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
4124 WMI_10_4_PDEV_PARAM_BURST_DUR,
4125 WMI_10_4_PDEV_PARAM_BURST_ENABLE,
4126 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4127 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
4128 WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
4129 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
4130 WMI_10_4_PDEV_PARAM_RX_FILTER,
4131 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
4132 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
4133 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4134 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4135 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4136 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
4137 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
4138 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
4139 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
4140 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
4141 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
4142 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
4143 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4144 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
4145 WMI_10_4_PDEV_PARAM_EN_STATS,
4146 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
4147 WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
4148 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
4149 WMI_10_4_PDEV_PARAM_DPD_ENABLE,
4150 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
4151 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
4152 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
4153 WMI_10_4_PDEV_PARAM_ANT_PLZN,
4154 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
4155 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
4156 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
4157 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
4158 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
4159 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
4160 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
4161 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
4162 WMI_10_4_PDEV_PARAM_CAL_PERIOD,
4163 WMI_10_4_PDEV_PARAM_PDEV_RESET,
4164 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
4165 WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
4166 WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
4167 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
4168 WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
4169 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
4170 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
4171 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
4172 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
4173 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
4174 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
4175 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
4176 };
4177
4178 struct wmi_pdev_set_param_cmd {
4179 __le32 param_id;
4180 __le32 param_value;
4181 } __packed;
4182
4183 struct wmi_pdev_set_base_macaddr_cmd {
4184 struct wmi_mac_addr mac_addr;
4185 } __packed;
4186
4187 /* valid period is 1 ~ 60000ms, unit in millisecond */
4188 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
4189
4190 struct wmi_pdev_get_tpc_config_cmd {
4191 /* parameter */
4192 __le32 param;
4193 } __packed;
4194
4195 #define WMI_TPC_CONFIG_PARAM 1
4196 #define WMI_TPC_FINAL_RATE_MAX 240
4197 #define WMI_TPC_TX_N_CHAIN 4
4198 #define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65)
4199 #define WMI_TPC_PREAM_TABLE_MAX 10
4200 #define WMI_TPC_FLAG 3
4201 #define WMI_TPC_BUF_SIZE 10
4202 #define WMI_TPC_BEAMFORMING 2
4203
4204 enum wmi_tpc_table_type {
4205 WMI_TPC_TABLE_TYPE_CDD = 0,
4206 WMI_TPC_TABLE_TYPE_STBC = 1,
4207 WMI_TPC_TABLE_TYPE_TXBF = 2,
4208 };
4209
4210 enum wmi_tpc_config_event_flag {
4211 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1,
4212 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2,
4213 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4,
4214 };
4215
4216 struct wmi_pdev_tpc_config_event {
4217 __le32 reg_domain;
4218 __le32 chan_freq;
4219 __le32 phy_mode;
4220 __le32 twice_antenna_reduction;
4221 __le32 twice_max_rd_power;
4222 a_sle32 twice_antenna_gain;
4223 __le32 power_limit;
4224 __le32 rate_max;
4225 __le32 num_tx_chain;
4226 __le32 ctl;
4227 __le32 flags;
4228 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4229 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4230 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4231 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4232 u8 rates_array[WMI_TPC_RATE_MAX];
4233 } __packed;
4234
4235 /* Transmit power scale factor. */
4236 enum wmi_tp_scale {
4237 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */
4238 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */
4239 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */
4240 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */
4241 WMI_TP_SCALE_MIN = 4, /* min, but still on */
4242 WMI_TP_SCALE_SIZE = 5, /* max num of enum */
4243 };
4244
4245 struct wmi_pdev_tpc_final_table_event {
4246 __le32 reg_domain;
4247 __le32 chan_freq;
4248 __le32 phy_mode;
4249 __le32 twice_antenna_reduction;
4250 __le32 twice_max_rd_power;
4251 a_sle32 twice_antenna_gain;
4252 __le32 power_limit;
4253 __le32 rate_max;
4254 __le32 num_tx_chain;
4255 __le32 ctl;
4256 __le32 flags;
4257 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4258 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4259 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4260 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4261 u8 rates_array[WMI_TPC_FINAL_RATE_MAX];
4262 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]
4263 [WMI_TPC_TX_N_CHAIN];
4264 } __packed;
4265
4266 struct wmi_pdev_get_tpc_table_cmd {
4267 __le32 param;
4268 } __packed;
4269
4270 enum wmi_tpc_pream_2ghz {
4271 WMI_TPC_PREAM_2GHZ_CCK = 0,
4272 WMI_TPC_PREAM_2GHZ_OFDM,
4273 WMI_TPC_PREAM_2GHZ_HT20,
4274 WMI_TPC_PREAM_2GHZ_HT40,
4275 WMI_TPC_PREAM_2GHZ_VHT20,
4276 WMI_TPC_PREAM_2GHZ_VHT40,
4277 WMI_TPC_PREAM_2GHZ_VHT80,
4278 };
4279
4280 enum wmi_tpc_pream_5ghz {
4281 WMI_TPC_PREAM_5GHZ_OFDM = 1,
4282 WMI_TPC_PREAM_5GHZ_HT20,
4283 WMI_TPC_PREAM_5GHZ_HT40,
4284 WMI_TPC_PREAM_5GHZ_VHT20,
4285 WMI_TPC_PREAM_5GHZ_VHT40,
4286 WMI_TPC_PREAM_5GHZ_VHT80,
4287 WMI_TPC_PREAM_5GHZ_HTCUP,
4288 };
4289
4290 #define WMI_PEER_PS_STATE_DISABLED 2
4291
4292 struct wmi_peer_sta_ps_state_chg_event {
4293 struct wmi_mac_addr peer_macaddr;
4294 __le32 peer_ps_state;
4295 } __packed;
4296
4297 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
4298
4299 struct wmi_debug_mesg_event {
4300 /* message buffer, NULL terminated */
4301 char bufp[WMI_MAX_DEBUG_MESG];
4302 } __packed;
4303
4304 enum {
4305 /* P2P device */
4306 VDEV_SUBTYPE_P2PDEV = 0,
4307 /* P2P client */
4308 VDEV_SUBTYPE_P2PCLI,
4309 /* P2P GO */
4310 VDEV_SUBTYPE_P2PGO,
4311 /* BT3.0 HS */
4312 VDEV_SUBTYPE_BT,
4313 };
4314
4315 struct wmi_pdev_set_channel_cmd {
4316 /* idnore power , only use flags , mode and freq */
4317 struct wmi_channel chan;
4318 } __packed;
4319
4320 struct wmi_pdev_pktlog_enable_cmd {
4321 __le32 ev_bitmap;
4322 } __packed;
4323
4324 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
4325 #define WMI_DSCP_MAP_MAX (64)
4326 struct wmi_pdev_set_dscp_tid_map_cmd {
4327 /* map indicating DSCP to TID conversion */
4328 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
4329 } __packed;
4330
4331 enum mcast_bcast_rate_id {
4332 WMI_SET_MCAST_RATE,
4333 WMI_SET_BCAST_RATE
4334 };
4335
4336 struct mcast_bcast_rate {
4337 enum mcast_bcast_rate_id rate_id;
4338 __le32 rate;
4339 } __packed;
4340
4341 struct wmi_wmm_params {
4342 __le32 cwmin;
4343 __le32 cwmax;
4344 __le32 aifs;
4345 __le32 txop;
4346 __le32 acm;
4347 __le32 no_ack;
4348 } __packed;
4349
4350 struct wmi_pdev_set_wmm_params {
4351 struct wmi_wmm_params ac_be;
4352 struct wmi_wmm_params ac_bk;
4353 struct wmi_wmm_params ac_vi;
4354 struct wmi_wmm_params ac_vo;
4355 } __packed;
4356
4357 struct wmi_wmm_params_arg {
4358 u32 cwmin;
4359 u32 cwmax;
4360 u32 aifs;
4361 u32 txop;
4362 u32 acm;
4363 u32 no_ack;
4364 };
4365
4366 struct wmi_wmm_params_all_arg {
4367 struct wmi_wmm_params_arg ac_be;
4368 struct wmi_wmm_params_arg ac_bk;
4369 struct wmi_wmm_params_arg ac_vi;
4370 struct wmi_wmm_params_arg ac_vo;
4371 };
4372
4373 struct wmi_pdev_stats_tx {
4374 /* Num HTT cookies queued to dispatch list */
4375 __le32 comp_queued;
4376
4377 /* Num HTT cookies dispatched */
4378 __le32 comp_delivered;
4379
4380 /* Num MSDU queued to WAL */
4381 __le32 msdu_enqued;
4382
4383 /* Num MPDU queue to WAL */
4384 __le32 mpdu_enqued;
4385
4386 /* Num MSDUs dropped by WMM limit */
4387 __le32 wmm_drop;
4388
4389 /* Num Local frames queued */
4390 __le32 local_enqued;
4391
4392 /* Num Local frames done */
4393 __le32 local_freed;
4394
4395 /* Num queued to HW */
4396 __le32 hw_queued;
4397
4398 /* Num PPDU reaped from HW */
4399 __le32 hw_reaped;
4400
4401 /* Num underruns */
4402 __le32 underrun;
4403
4404 /* Num PPDUs cleaned up in TX abort */
4405 __le32 tx_abort;
4406
4407 /* Num MPDUs requeued by SW */
4408 __le32 mpdus_requeued;
4409
4410 /* excessive retries */
4411 __le32 tx_ko;
4412
4413 /* data hw rate code */
4414 __le32 data_rc;
4415
4416 /* Scheduler self triggers */
4417 __le32 self_triggers;
4418
4419 /* frames dropped due to excessive sw retries */
4420 __le32 sw_retry_failure;
4421
4422 /* illegal rate phy errors */
4423 __le32 illgl_rate_phy_err;
4424
4425 /* wal pdev continuous xretry */
4426 __le32 pdev_cont_xretry;
4427
4428 /* wal pdev continuous xretry */
4429 __le32 pdev_tx_timeout;
4430
4431 /* wal pdev resets */
4432 __le32 pdev_resets;
4433
4434 /* frames dropped due to non-availability of stateless TIDs */
4435 __le32 stateless_tid_alloc_failure;
4436
4437 __le32 phy_underrun;
4438
4439 /* MPDU is more than txop limit */
4440 __le32 txop_ovf;
4441 } __packed;
4442
4443 struct wmi_10_4_pdev_stats_tx {
4444 /* Num HTT cookies queued to dispatch list */
4445 __le32 comp_queued;
4446
4447 /* Num HTT cookies dispatched */
4448 __le32 comp_delivered;
4449
4450 /* Num MSDU queued to WAL */
4451 __le32 msdu_enqued;
4452
4453 /* Num MPDU queue to WAL */
4454 __le32 mpdu_enqued;
4455
4456 /* Num MSDUs dropped by WMM limit */
4457 __le32 wmm_drop;
4458
4459 /* Num Local frames queued */
4460 __le32 local_enqued;
4461
4462 /* Num Local frames done */
4463 __le32 local_freed;
4464
4465 /* Num queued to HW */
4466 __le32 hw_queued;
4467
4468 /* Num PPDU reaped from HW */
4469 __le32 hw_reaped;
4470
4471 /* Num underruns */
4472 __le32 underrun;
4473
4474 /* HW Paused. */
4475 __le32 hw_paused;
4476
4477 /* Num PPDUs cleaned up in TX abort */
4478 __le32 tx_abort;
4479
4480 /* Num MPDUs requeued by SW */
4481 __le32 mpdus_requeued;
4482
4483 /* excessive retries */
4484 __le32 tx_ko;
4485
4486 /* data hw rate code */
4487 __le32 data_rc;
4488
4489 /* Scheduler self triggers */
4490 __le32 self_triggers;
4491
4492 /* frames dropped due to excessive sw retries */
4493 __le32 sw_retry_failure;
4494
4495 /* illegal rate phy errors */
4496 __le32 illgl_rate_phy_err;
4497
4498 /* wal pdev continuous xretry */
4499 __le32 pdev_cont_xretry;
4500
4501 /* wal pdev tx timeouts */
4502 __le32 pdev_tx_timeout;
4503
4504 /* wal pdev resets */
4505 __le32 pdev_resets;
4506
4507 /* frames dropped due to non-availability of stateless TIDs */
4508 __le32 stateless_tid_alloc_failure;
4509
4510 __le32 phy_underrun;
4511
4512 /* MPDU is more than txop limit */
4513 __le32 txop_ovf;
4514
4515 /* Number of Sequences posted */
4516 __le32 seq_posted;
4517
4518 /* Number of Sequences failed queueing */
4519 __le32 seq_failed_queueing;
4520
4521 /* Number of Sequences completed */
4522 __le32 seq_completed;
4523
4524 /* Number of Sequences restarted */
4525 __le32 seq_restarted;
4526
4527 /* Number of MU Sequences posted */
4528 __le32 mu_seq_posted;
4529
4530 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4531 __le32 mpdus_sw_flush;
4532
4533 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4534 __le32 mpdus_hw_filter;
4535
4536 /* Num MPDUs truncated by PDG
4537 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4538 */
4539 __le32 mpdus_truncated;
4540
4541 /* Num MPDUs that was tried but didn't receive ACK or BA */
4542 __le32 mpdus_ack_failed;
4543
4544 /* Num MPDUs that was dropped due to expiry. */
4545 __le32 mpdus_expired;
4546 } __packed;
4547
4548 struct wmi_pdev_stats_rx {
4549 /* Cnts any change in ring routing mid-ppdu */
4550 __le32 mid_ppdu_route_change;
4551
4552 /* Total number of statuses processed */
4553 __le32 status_rcvd;
4554
4555 /* Extra frags on rings 0-3 */
4556 __le32 r0_frags;
4557 __le32 r1_frags;
4558 __le32 r2_frags;
4559 __le32 r3_frags;
4560
4561 /* MSDUs / MPDUs delivered to HTT */
4562 __le32 htt_msdus;
4563 __le32 htt_mpdus;
4564
4565 /* MSDUs / MPDUs delivered to local stack */
4566 __le32 loc_msdus;
4567 __le32 loc_mpdus;
4568
4569 /* AMSDUs that have more MSDUs than the status ring size */
4570 __le32 oversize_amsdu;
4571
4572 /* Number of PHY errors */
4573 __le32 phy_errs;
4574
4575 /* Number of PHY errors drops */
4576 __le32 phy_err_drop;
4577
4578 /* Number of mpdu errors - FCS, MIC, ENC etc. */
4579 __le32 mpdu_errs;
4580 } __packed;
4581
4582 struct wmi_pdev_stats_peer {
4583 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4584 __le32 dummy;
4585 } __packed;
4586
4587 enum wmi_stats_id {
4588 WMI_STAT_PEER = BIT(0),
4589 WMI_STAT_AP = BIT(1),
4590 WMI_STAT_PDEV = BIT(2),
4591 WMI_STAT_VDEV = BIT(3),
4592 WMI_STAT_BCNFLT = BIT(4),
4593 WMI_STAT_VDEV_RATE = BIT(5),
4594 };
4595
4596 enum wmi_10_4_stats_id {
4597 WMI_10_4_STAT_PEER = BIT(0),
4598 WMI_10_4_STAT_AP = BIT(1),
4599 WMI_10_4_STAT_INST = BIT(2),
4600 WMI_10_4_STAT_PEER_EXTD = BIT(3),
4601 WMI_10_4_STAT_VDEV_EXTD = BIT(4),
4602 };
4603
4604 enum wmi_tlv_stats_id {
4605 WMI_TLV_STAT_PEER = BIT(0),
4606 WMI_TLV_STAT_AP = BIT(1),
4607 WMI_TLV_STAT_PDEV = BIT(2),
4608 WMI_TLV_STAT_VDEV = BIT(3),
4609 WMI_TLV_STAT_PEER_EXTD = BIT(10),
4610 };
4611
4612 struct wlan_inst_rssi_args {
4613 __le16 cfg_retry_count;
4614 __le16 retry_count;
4615 };
4616
4617 struct wmi_request_stats_cmd {
4618 __le32 stats_id;
4619
4620 __le32 vdev_id;
4621
4622 /* peer MAC address */
4623 struct wmi_mac_addr peer_macaddr;
4624
4625 /* Instantaneous RSSI arguments */
4626 struct wlan_inst_rssi_args inst_rssi_args;
4627 } __packed;
4628
4629 enum wmi_peer_stats_info_request_type {
4630 /* request stats of one specified peer */
4631 WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01,
4632 /* request stats of all peers belong to specified VDEV */
4633 WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02,
4634 };
4635
4636 /* Suspend option */
4637 enum {
4638 /* suspend */
4639 WMI_PDEV_SUSPEND,
4640
4641 /* suspend and disable all interrupts */
4642 WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4643 };
4644
4645 struct wmi_pdev_suspend_cmd {
4646 /* suspend option sent to target */
4647 __le32 suspend_opt;
4648 } __packed;
4649
4650 struct wmi_stats_event {
4651 __le32 stats_id; /* WMI_STAT_ */
4652 /*
4653 * number of pdev stats event structures
4654 * (wmi_pdev_stats) 0 or 1
4655 */
4656 __le32 num_pdev_stats;
4657 /*
4658 * number of vdev stats event structures
4659 * (wmi_vdev_stats) 0 or max vdevs
4660 */
4661 __le32 num_vdev_stats;
4662 /*
4663 * number of peer stats event structures
4664 * (wmi_peer_stats) 0 or max peers
4665 */
4666 __le32 num_peer_stats;
4667 __le32 num_bcnflt_stats;
4668 /*
4669 * followed by
4670 * num_pdev_stats * size of(struct wmi_pdev_stats)
4671 * num_vdev_stats * size of(struct wmi_vdev_stats)
4672 * num_peer_stats * size of(struct wmi_peer_stats)
4673 *
4674 * By having a zero sized array, the pointer to data area
4675 * becomes available without increasing the struct size
4676 */
4677 u8 data[];
4678 } __packed;
4679
4680 struct wmi_10_2_stats_event {
4681 __le32 stats_id; /* %WMI_REQUEST_ */
4682 __le32 num_pdev_stats;
4683 __le32 num_pdev_ext_stats;
4684 __le32 num_vdev_stats;
4685 __le32 num_peer_stats;
4686 __le32 num_bcnflt_stats;
4687 u8 data[];
4688 } __packed;
4689
4690 /*
4691 * PDEV statistics
4692 * TODO: add all PDEV stats here
4693 */
4694 struct wmi_pdev_stats_base {
4695 __le32 chan_nf;
4696 __le32 tx_frame_count; /* Cycles spent transmitting frames */
4697 __le32 rx_frame_count; /* Cycles spent receiving frames */
4698 __le32 rx_clear_count; /* Total channel busy time, evidently */
4699 __le32 cycle_count; /* Total on-channel time */
4700 __le32 phy_err_count;
4701 __le32 chan_tx_pwr;
4702 } __packed;
4703
4704 struct wmi_pdev_stats {
4705 struct wmi_pdev_stats_base base;
4706 struct wmi_pdev_stats_tx tx;
4707 struct wmi_pdev_stats_rx rx;
4708 struct wmi_pdev_stats_peer peer;
4709 } __packed;
4710
4711 struct wmi_pdev_stats_extra {
4712 __le32 ack_rx_bad;
4713 __le32 rts_bad;
4714 __le32 rts_good;
4715 __le32 fcs_bad;
4716 __le32 no_beacons;
4717 __le32 mib_int_count;
4718 } __packed;
4719
4720 struct wmi_10x_pdev_stats {
4721 struct wmi_pdev_stats_base base;
4722 struct wmi_pdev_stats_tx tx;
4723 struct wmi_pdev_stats_rx rx;
4724 struct wmi_pdev_stats_peer peer;
4725 struct wmi_pdev_stats_extra extra;
4726 } __packed;
4727
4728 struct wmi_pdev_stats_mem {
4729 __le32 dram_free;
4730 __le32 iram_free;
4731 } __packed;
4732
4733 struct wmi_10_2_pdev_stats {
4734 struct wmi_pdev_stats_base base;
4735 struct wmi_pdev_stats_tx tx;
4736 __le32 mc_drop;
4737 struct wmi_pdev_stats_rx rx;
4738 __le32 pdev_rx_timeout;
4739 struct wmi_pdev_stats_mem mem;
4740 struct wmi_pdev_stats_peer peer;
4741 struct wmi_pdev_stats_extra extra;
4742 } __packed;
4743
4744 struct wmi_10_4_pdev_stats {
4745 struct wmi_pdev_stats_base base;
4746 struct wmi_10_4_pdev_stats_tx tx;
4747 struct wmi_pdev_stats_rx rx;
4748 __le32 rx_ovfl_errs;
4749 struct wmi_pdev_stats_mem mem;
4750 __le32 sram_free_size;
4751 struct wmi_pdev_stats_extra extra;
4752 } __packed;
4753
4754 /*
4755 * VDEV statistics
4756 */
4757
4758 #define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31)
4759 #define WMI_VDEV_STATS_FTM_COUNT_LSB 0
4760 #define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff
4761
4762 struct wmi_vdev_stats {
4763 __le32 vdev_id;
4764 } __packed;
4765
4766 struct wmi_vdev_stats_extd {
4767 __le32 vdev_id;
4768 __le32 ppdu_aggr_cnt;
4769 __le32 ppdu_noack;
4770 __le32 mpdu_queued;
4771 __le32 ppdu_nonaggr_cnt;
4772 __le32 mpdu_sw_requeued;
4773 __le32 mpdu_suc_retry;
4774 __le32 mpdu_suc_multitry;
4775 __le32 mpdu_fail_retry;
4776 __le32 tx_ftm_suc;
4777 __le32 tx_ftm_suc_retry;
4778 __le32 tx_ftm_fail;
4779 __le32 rx_ftmr_cnt;
4780 __le32 rx_ftmr_dup_cnt;
4781 __le32 rx_iftmr_cnt;
4782 __le32 rx_iftmr_dup_cnt;
4783 __le32 reserved[6];
4784 } __packed;
4785
4786 /*
4787 * peer statistics.
4788 * TODO: add more stats
4789 */
4790 struct wmi_peer_stats {
4791 struct wmi_mac_addr peer_macaddr;
4792 __le32 peer_rssi;
4793 __le32 peer_tx_rate;
4794 } __packed;
4795
4796 struct wmi_10x_peer_stats {
4797 struct wmi_peer_stats old;
4798 __le32 peer_rx_rate;
4799 } __packed;
4800
4801 struct wmi_10_2_peer_stats {
4802 struct wmi_peer_stats old;
4803 __le32 peer_rx_rate;
4804 __le32 current_per;
4805 __le32 retries;
4806 __le32 tx_rate_count;
4807 __le32 max_4ms_frame_len;
4808 __le32 total_sub_frames;
4809 __le32 tx_bytes;
4810 __le32 num_pkt_loss_overflow[4];
4811 __le32 num_pkt_loss_excess_retry[4];
4812 } __packed;
4813
4814 struct wmi_10_2_4_peer_stats {
4815 struct wmi_10_2_peer_stats common;
4816 __le32 peer_rssi_changed;
4817 } __packed;
4818
4819 struct wmi_10_2_4_ext_peer_stats {
4820 struct wmi_10_2_peer_stats common;
4821 __le32 peer_rssi_changed;
4822 __le32 rx_duration;
4823 } __packed;
4824
4825 struct wmi_10_4_peer_stats {
4826 struct wmi_mac_addr peer_macaddr;
4827 __le32 peer_rssi;
4828 __le32 peer_rssi_seq_num;
4829 __le32 peer_tx_rate;
4830 __le32 peer_rx_rate;
4831 __le32 current_per;
4832 __le32 retries;
4833 __le32 tx_rate_count;
4834 __le32 max_4ms_frame_len;
4835 __le32 total_sub_frames;
4836 __le32 tx_bytes;
4837 __le32 num_pkt_loss_overflow[4];
4838 __le32 num_pkt_loss_excess_retry[4];
4839 __le32 peer_rssi_changed;
4840 } __packed;
4841
4842 struct wmi_10_4_peer_extd_stats {
4843 struct wmi_mac_addr peer_macaddr;
4844 __le32 inactive_time;
4845 __le32 peer_chain_rssi;
4846 __le32 rx_duration;
4847 __le32 reserved[10];
4848 } __packed;
4849
4850 struct wmi_10_4_bss_bcn_stats {
4851 __le32 vdev_id;
4852 __le32 bss_bcns_dropped;
4853 __le32 bss_bcn_delivered;
4854 } __packed;
4855
4856 struct wmi_10_4_bss_bcn_filter_stats {
4857 __le32 bcns_dropped;
4858 __le32 bcns_delivered;
4859 __le32 active_filters;
4860 struct wmi_10_4_bss_bcn_stats bss_stats;
4861 } __packed;
4862
4863 struct wmi_10_2_pdev_ext_stats {
4864 __le32 rx_rssi_comb;
4865 __le32 rx_rssi[4];
4866 __le32 rx_mcs[10];
4867 __le32 tx_mcs[10];
4868 __le32 ack_rssi;
4869 } __packed;
4870
4871 struct wmi_vdev_create_cmd {
4872 __le32 vdev_id;
4873 __le32 vdev_type;
4874 __le32 vdev_subtype;
4875 struct wmi_mac_addr vdev_macaddr;
4876 } __packed;
4877
4878 enum wmi_vdev_type {
4879 WMI_VDEV_TYPE_AP = 1,
4880 WMI_VDEV_TYPE_STA = 2,
4881 WMI_VDEV_TYPE_IBSS = 3,
4882 WMI_VDEV_TYPE_MONITOR = 4,
4883 };
4884
4885 enum wmi_vdev_subtype {
4886 WMI_VDEV_SUBTYPE_NONE,
4887 WMI_VDEV_SUBTYPE_P2P_DEVICE,
4888 WMI_VDEV_SUBTYPE_P2P_CLIENT,
4889 WMI_VDEV_SUBTYPE_P2P_GO,
4890 WMI_VDEV_SUBTYPE_PROXY_STA,
4891 WMI_VDEV_SUBTYPE_MESH_11S,
4892 WMI_VDEV_SUBTYPE_MESH_NON_11S,
4893 };
4894
4895 enum wmi_vdev_subtype_legacy {
4896 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0,
4897 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1,
4898 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2,
4899 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3,
4900 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
4901 };
4902
4903 enum wmi_vdev_subtype_10_2_4 {
4904 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0,
4905 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1,
4906 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2,
4907 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3,
4908 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
4909 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5,
4910 };
4911
4912 enum wmi_vdev_subtype_10_4 {
4913 WMI_VDEV_SUBTYPE_10_4_NONE = 0,
4914 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1,
4915 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2,
4916 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3,
4917 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4,
4918 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
4919 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6,
4920 };
4921
4922 /* values for vdev_subtype */
4923
4924 /* values for vdev_start_request flags */
4925 /*
4926 * Indicates that AP VDEV uses hidden ssid. only valid for
4927 * AP/GO
4928 */
4929 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0)
4930 /*
4931 * Indicates if robust management frame/management frame
4932 * protection is enabled. For GO/AP vdevs, it indicates that
4933 * it may support station/client associations with RMF enabled.
4934 * For STA/client vdevs, it indicates that sta will
4935 * associate with AP with RMF enabled.
4936 */
4937 #define WMI_VDEV_START_PMF_ENABLED (1 << 1)
4938
4939 struct wmi_p2p_noa_descriptor {
4940 __le32 type_count; /* 255: continuous schedule, 0: reserved */
4941 __le32 duration; /* Absent period duration in micro seconds */
4942 __le32 interval; /* Absent period interval in micro seconds */
4943 __le32 start_time; /* 32 bit tsf time when in starts */
4944 } __packed;
4945
4946 struct wmi_vdev_start_request_cmd {
4947 /* WMI channel */
4948 struct wmi_channel chan;
4949 /* unique id identifying the VDEV, generated by the caller */
4950 __le32 vdev_id;
4951 /* requestor id identifying the caller module */
4952 __le32 requestor_id;
4953 /* beacon interval from received beacon */
4954 __le32 beacon_interval;
4955 /* DTIM Period from the received beacon */
4956 __le32 dtim_period;
4957 /* Flags */
4958 __le32 flags;
4959 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4960 struct wmi_ssid ssid;
4961 /* beacon/probe response xmit rate. Applicable for SoftAP. */
4962 __le32 bcn_tx_rate;
4963 /* beacon/probe response xmit power. Applicable for SoftAP. */
4964 __le32 bcn_tx_power;
4965 /* number of p2p NOA descriptor(s) from scan entry */
4966 __le32 num_noa_descriptors;
4967 /*
4968 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4969 * During CAC, Our HW shouldn't ack ditected frames
4970 */
4971 __le32 disable_hw_ack;
4972 /* actual p2p NOA descriptor from scan entry */
4973 struct wmi_p2p_noa_descriptor noa_descriptors[2];
4974 } __packed;
4975
4976 struct wmi_vdev_restart_request_cmd {
4977 struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4978 } __packed;
4979
4980 struct wmi_vdev_start_request_arg {
4981 u32 vdev_id;
4982 struct wmi_channel_arg channel;
4983 u32 bcn_intval;
4984 u32 dtim_period;
4985 u8 *ssid;
4986 u32 ssid_len;
4987 u32 bcn_tx_rate;
4988 u32 bcn_tx_power;
4989 bool disable_hw_ack;
4990 bool hidden_ssid;
4991 bool pmf_enabled;
4992 };
4993
4994 struct wmi_vdev_delete_cmd {
4995 /* unique id identifying the VDEV, generated by the caller */
4996 __le32 vdev_id;
4997 } __packed;
4998
4999 struct wmi_vdev_up_cmd {
5000 __le32 vdev_id;
5001 __le32 vdev_assoc_id;
5002 struct wmi_mac_addr vdev_bssid;
5003 } __packed;
5004
5005 struct wmi_vdev_stop_cmd {
5006 __le32 vdev_id;
5007 } __packed;
5008
5009 struct wmi_vdev_down_cmd {
5010 __le32 vdev_id;
5011 } __packed;
5012
5013 struct wmi_vdev_standby_response_cmd {
5014 /* unique id identifying the VDEV, generated by the caller */
5015 __le32 vdev_id;
5016 } __packed;
5017
5018 struct wmi_vdev_resume_response_cmd {
5019 /* unique id identifying the VDEV, generated by the caller */
5020 __le32 vdev_id;
5021 } __packed;
5022
5023 struct wmi_vdev_set_param_cmd {
5024 __le32 vdev_id;
5025 __le32 param_id;
5026 __le32 param_value;
5027 } __packed;
5028
5029 #define WMI_MAX_KEY_INDEX 3
5030 #define WMI_MAX_KEY_LEN 32
5031
5032 #define WMI_KEY_PAIRWISE 0x00
5033 #define WMI_KEY_GROUP 0x01
5034 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
5035
5036 struct wmi_key_seq_counter {
5037 __le32 key_seq_counter_l;
5038 __le32 key_seq_counter_h;
5039 } __packed;
5040
5041 enum wmi_cipher_suites {
5042 WMI_CIPHER_NONE,
5043 WMI_CIPHER_WEP,
5044 WMI_CIPHER_TKIP,
5045 WMI_CIPHER_AES_OCB,
5046 WMI_CIPHER_AES_CCM,
5047 WMI_CIPHER_WAPI,
5048 WMI_CIPHER_CKIP,
5049 WMI_CIPHER_AES_CMAC,
5050 WMI_CIPHER_AES_GCM,
5051 };
5052
5053 enum wmi_tlv_cipher_suites {
5054 WMI_TLV_CIPHER_NONE,
5055 WMI_TLV_CIPHER_WEP,
5056 WMI_TLV_CIPHER_TKIP,
5057 WMI_TLV_CIPHER_AES_OCB,
5058 WMI_TLV_CIPHER_AES_CCM,
5059 WMI_TLV_CIPHER_WAPI,
5060 WMI_TLV_CIPHER_CKIP,
5061 WMI_TLV_CIPHER_AES_CMAC,
5062 WMI_TLV_CIPHER_ANY,
5063 WMI_TLV_CIPHER_AES_GCM,
5064 };
5065
5066 struct wmi_vdev_install_key_cmd {
5067 __le32 vdev_id;
5068 struct wmi_mac_addr peer_macaddr;
5069 __le32 key_idx;
5070 __le32 key_flags;
5071 __le32 key_cipher; /* %WMI_CIPHER_ */
5072 struct wmi_key_seq_counter key_rsc_counter;
5073 struct wmi_key_seq_counter key_global_rsc_counter;
5074 struct wmi_key_seq_counter key_tsc_counter;
5075 u8 wpi_key_rsc_counter[16];
5076 u8 wpi_key_tsc_counter[16];
5077 __le32 key_len;
5078 __le32 key_txmic_len;
5079 __le32 key_rxmic_len;
5080
5081 /* contains key followed by tx mic followed by rx mic */
5082 u8 key_data[];
5083 } __packed;
5084
5085 struct wmi_vdev_install_key_arg {
5086 u32 vdev_id;
5087 const u8 *macaddr;
5088 u32 key_idx;
5089 u32 key_flags;
5090 u32 key_cipher;
5091 u32 key_len;
5092 u32 key_txmic_len;
5093 u32 key_rxmic_len;
5094 const void *key_data;
5095 };
5096
5097 /*
5098 * vdev fixed rate format:
5099 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
5100 * - nss - b5:b4 - ss number (0 mean 1ss)
5101 * - rate_mcs - b3:b0 - as below
5102 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
5103 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
5104 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
5105 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
5106 * HT/VHT: MCS index
5107 */
5108
5109 /* Preamble types to be used with VDEV fixed rate configuration */
5110 enum wmi_rate_preamble {
5111 WMI_RATE_PREAMBLE_OFDM,
5112 WMI_RATE_PREAMBLE_CCK,
5113 WMI_RATE_PREAMBLE_HT,
5114 WMI_RATE_PREAMBLE_VHT,
5115 };
5116
5117 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3))
5118 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3)
5119 #define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf)
5120 #define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f)
5121 #define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3)
5122 #define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1)
5123 #define ATH10K_HW_RATECODE(rate, nss, preamble) \
5124 (((preamble) << 6) | ((nss) << 4) | (rate))
5125 #define ATH10K_HW_AMPDU(flags) ((flags) & 0x1)
5126 #define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3)
5127 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1)
5128
5129 #define ATH10K_VHT_MCS_NUM 10
5130 #define ATH10K_BW_NUM 6
5131 #define ATH10K_NSS_NUM 4
5132 #define ATH10K_LEGACY_NUM 12
5133 #define ATH10K_GI_NUM 2
5134 #define ATH10K_HT_MCS_NUM 32
5135 #define ATH10K_RATE_TABLE_NUM 320
5136 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2
5137
5138 /* Value to disable fixed rate setting */
5139 #define WMI_FIXED_RATE_NONE (0xff)
5140
5141 struct wmi_peer_param_map {
5142 u32 smps_state;
5143 u32 ampdu;
5144 u32 authorize;
5145 u32 chan_width;
5146 u32 nss;
5147 u32 use_4addr;
5148 u32 membership;
5149 u32 use_fixed_power;
5150 u32 user_pos;
5151 u32 crit_proto_hint_enabled;
5152 u32 tx_fail_cnt_thr;
5153 u32 set_hw_retry_cts2s;
5154 u32 ibss_atim_win_len;
5155 u32 debug;
5156 u32 phymode;
5157 u32 dummy_var;
5158 };
5159
5160 struct wmi_vdev_param_map {
5161 u32 rts_threshold;
5162 u32 fragmentation_threshold;
5163 u32 beacon_interval;
5164 u32 listen_interval;
5165 u32 multicast_rate;
5166 u32 mgmt_tx_rate;
5167 u32 slot_time;
5168 u32 preamble;
5169 u32 swba_time;
5170 u32 wmi_vdev_stats_update_period;
5171 u32 wmi_vdev_pwrsave_ageout_time;
5172 u32 wmi_vdev_host_swba_interval;
5173 u32 dtim_period;
5174 u32 wmi_vdev_oc_scheduler_air_time_limit;
5175 u32 wds;
5176 u32 atim_window;
5177 u32 bmiss_count_max;
5178 u32 bmiss_first_bcnt;
5179 u32 bmiss_final_bcnt;
5180 u32 feature_wmm;
5181 u32 chwidth;
5182 u32 chextoffset;
5183 u32 disable_htprotection;
5184 u32 sta_quickkickout;
5185 u32 mgmt_rate;
5186 u32 protection_mode;
5187 u32 fixed_rate;
5188 u32 sgi;
5189 u32 ldpc;
5190 u32 tx_stbc;
5191 u32 rx_stbc;
5192 u32 intra_bss_fwd;
5193 u32 def_keyid;
5194 u32 nss;
5195 u32 bcast_data_rate;
5196 u32 mcast_data_rate;
5197 u32 mcast_indicate;
5198 u32 dhcp_indicate;
5199 u32 unknown_dest_indicate;
5200 u32 ap_keepalive_min_idle_inactive_time_secs;
5201 u32 ap_keepalive_max_idle_inactive_time_secs;
5202 u32 ap_keepalive_max_unresponsive_time_secs;
5203 u32 ap_enable_nawds;
5204 u32 mcast2ucast_set;
5205 u32 enable_rtscts;
5206 u32 txbf;
5207 u32 packet_powersave;
5208 u32 drop_unencry;
5209 u32 tx_encap_type;
5210 u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
5211 u32 rc_num_retries;
5212 u32 cabq_maxdur;
5213 u32 mfptest_set;
5214 u32 rts_fixed_rate;
5215 u32 vht_sgimask;
5216 u32 vht80_ratemask;
5217 u32 early_rx_adjust_enable;
5218 u32 early_rx_tgt_bmiss_num;
5219 u32 early_rx_bmiss_sample_cycle;
5220 u32 early_rx_slop_step;
5221 u32 early_rx_init_slop;
5222 u32 early_rx_adjust_pause;
5223 u32 proxy_sta;
5224 u32 meru_vc;
5225 u32 rx_decap_type;
5226 u32 bw_nss_ratemask;
5227 u32 inc_tsf;
5228 u32 dec_tsf;
5229 u32 disable_4addr_src_lrn;
5230 u32 rtt_responder_role;
5231 };
5232
5233 #define WMI_VDEV_PARAM_UNSUPPORTED 0
5234
5235 /* the definition of different VDEV parameters */
5236 enum wmi_vdev_param {
5237 /* RTS Threshold */
5238 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5239 /* Fragmentation threshold */
5240 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5241 /* beacon interval in TUs */
5242 WMI_VDEV_PARAM_BEACON_INTERVAL,
5243 /* Listen interval in TUs */
5244 WMI_VDEV_PARAM_LISTEN_INTERVAL,
5245 /* multicast rate in Mbps */
5246 WMI_VDEV_PARAM_MULTICAST_RATE,
5247 /* management frame rate in Mbps */
5248 WMI_VDEV_PARAM_MGMT_TX_RATE,
5249 /* slot time (long vs short) */
5250 WMI_VDEV_PARAM_SLOT_TIME,
5251 /* preamble (long vs short) */
5252 WMI_VDEV_PARAM_PREAMBLE,
5253 /* SWBA time (time before tbtt in msec) */
5254 WMI_VDEV_PARAM_SWBA_TIME,
5255 /* time period for updating VDEV stats */
5256 WMI_VDEV_STATS_UPDATE_PERIOD,
5257 /* age out time in msec for frames queued for station in power save */
5258 WMI_VDEV_PWRSAVE_AGEOUT_TIME,
5259 /*
5260 * Host SWBA interval (time in msec before tbtt for SWBA event
5261 * generation).
5262 */
5263 WMI_VDEV_HOST_SWBA_INTERVAL,
5264 /* DTIM period (specified in units of num beacon intervals) */
5265 WMI_VDEV_PARAM_DTIM_PERIOD,
5266 /*
5267 * scheduler air time limit for this VDEV. used by off chan
5268 * scheduler.
5269 */
5270 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5271 /* enable/disable WDS for this VDEV */
5272 WMI_VDEV_PARAM_WDS,
5273 /* ATIM Window */
5274 WMI_VDEV_PARAM_ATIM_WINDOW,
5275 /* BMISS max */
5276 WMI_VDEV_PARAM_BMISS_COUNT_MAX,
5277 /* BMISS first time */
5278 WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
5279 /* BMISS final time */
5280 WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
5281 /* WMM enables/disabled */
5282 WMI_VDEV_PARAM_FEATURE_WMM,
5283 /* Channel width */
5284 WMI_VDEV_PARAM_CHWIDTH,
5285 /* Channel Offset */
5286 WMI_VDEV_PARAM_CHEXTOFFSET,
5287 /* Disable HT Protection */
5288 WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
5289 /* Quick STA Kickout */
5290 WMI_VDEV_PARAM_STA_QUICKKICKOUT,
5291 /* Rate to be used with Management frames */
5292 WMI_VDEV_PARAM_MGMT_RATE,
5293 /* Protection Mode */
5294 WMI_VDEV_PARAM_PROTECTION_MODE,
5295 /* Fixed rate setting */
5296 WMI_VDEV_PARAM_FIXED_RATE,
5297 /* Short GI Enable/Disable */
5298 WMI_VDEV_PARAM_SGI,
5299 /* Enable LDPC */
5300 WMI_VDEV_PARAM_LDPC,
5301 /* Enable Tx STBC */
5302 WMI_VDEV_PARAM_TX_STBC,
5303 /* Enable Rx STBC */
5304 WMI_VDEV_PARAM_RX_STBC,
5305 /* Intra BSS forwarding */
5306 WMI_VDEV_PARAM_INTRA_BSS_FWD,
5307 /* Setting Default xmit key for Vdev */
5308 WMI_VDEV_PARAM_DEF_KEYID,
5309 /* NSS width */
5310 WMI_VDEV_PARAM_NSS,
5311 /* Set the custom rate for the broadcast data frames */
5312 WMI_VDEV_PARAM_BCAST_DATA_RATE,
5313 /* Set the custom rate (rate-code) for multicast data frames */
5314 WMI_VDEV_PARAM_MCAST_DATA_RATE,
5315 /* Tx multicast packet indicate Enable/Disable */
5316 WMI_VDEV_PARAM_MCAST_INDICATE,
5317 /* Tx DHCP packet indicate Enable/Disable */
5318 WMI_VDEV_PARAM_DHCP_INDICATE,
5319 /* Enable host inspection of Tx unicast packet to unknown destination */
5320 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5321
5322 /* The minimum amount of time AP begins to consider STA inactive */
5323 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5324
5325 /*
5326 * An associated STA is considered inactive when there is no recent
5327 * TX/RX activity and no downlink frames are buffered for it. Once a
5328 * STA exceeds the maximum idle inactive time, the AP will send an
5329 * 802.11 data-null as a keep alive to verify the STA is still
5330 * associated. If the STA does ACK the data-null, or if the data-null
5331 * is buffered and the STA does not retrieve it, the STA will be
5332 * considered unresponsive
5333 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5334 */
5335 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5336
5337 /*
5338 * An associated STA is considered unresponsive if there is no recent
5339 * TX/RX activity and downlink frames are buffered for it. Once a STA
5340 * exceeds the maximum unresponsive time, the AP will send a
5341 * WMI_STA_KICKOUT event to the host so the STA can be deleted.
5342 */
5343 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5344
5345 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5346 WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
5347 /* Enable/Disable RTS-CTS */
5348 WMI_VDEV_PARAM_ENABLE_RTSCTS,
5349 /* Enable TXBFee/er */
5350 WMI_VDEV_PARAM_TXBF,
5351
5352 /* Set packet power save */
5353 WMI_VDEV_PARAM_PACKET_POWERSAVE,
5354
5355 /*
5356 * Drops un-encrypted packets if eceived in an encrypted connection
5357 * otherwise forwards to host.
5358 */
5359 WMI_VDEV_PARAM_DROP_UNENCRY,
5360
5361 /*
5362 * Set the encapsulation type for frames.
5363 */
5364 WMI_VDEV_PARAM_TX_ENCAP_TYPE,
5365 };
5366
5367 /* the definition of different VDEV parameters */
5368 enum wmi_10x_vdev_param {
5369 /* RTS Threshold */
5370 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5371 /* Fragmentation threshold */
5372 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5373 /* beacon interval in TUs */
5374 WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
5375 /* Listen interval in TUs */
5376 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
5377 /* multicast rate in Mbps */
5378 WMI_10X_VDEV_PARAM_MULTICAST_RATE,
5379 /* management frame rate in Mbps */
5380 WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
5381 /* slot time (long vs short) */
5382 WMI_10X_VDEV_PARAM_SLOT_TIME,
5383 /* preamble (long vs short) */
5384 WMI_10X_VDEV_PARAM_PREAMBLE,
5385 /* SWBA time (time before tbtt in msec) */
5386 WMI_10X_VDEV_PARAM_SWBA_TIME,
5387 /* time period for updating VDEV stats */
5388 WMI_10X_VDEV_STATS_UPDATE_PERIOD,
5389 /* age out time in msec for frames queued for station in power save */
5390 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
5391 /*
5392 * Host SWBA interval (time in msec before tbtt for SWBA event
5393 * generation).
5394 */
5395 WMI_10X_VDEV_HOST_SWBA_INTERVAL,
5396 /* DTIM period (specified in units of num beacon intervals) */
5397 WMI_10X_VDEV_PARAM_DTIM_PERIOD,
5398 /*
5399 * scheduler air time limit for this VDEV. used by off chan
5400 * scheduler.
5401 */
5402 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5403 /* enable/disable WDS for this VDEV */
5404 WMI_10X_VDEV_PARAM_WDS,
5405 /* ATIM Window */
5406 WMI_10X_VDEV_PARAM_ATIM_WINDOW,
5407 /* BMISS max */
5408 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
5409 /* WMM enables/disabled */
5410 WMI_10X_VDEV_PARAM_FEATURE_WMM,
5411 /* Channel width */
5412 WMI_10X_VDEV_PARAM_CHWIDTH,
5413 /* Channel Offset */
5414 WMI_10X_VDEV_PARAM_CHEXTOFFSET,
5415 /* Disable HT Protection */
5416 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
5417 /* Quick STA Kickout */
5418 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
5419 /* Rate to be used with Management frames */
5420 WMI_10X_VDEV_PARAM_MGMT_RATE,
5421 /* Protection Mode */
5422 WMI_10X_VDEV_PARAM_PROTECTION_MODE,
5423 /* Fixed rate setting */
5424 WMI_10X_VDEV_PARAM_FIXED_RATE,
5425 /* Short GI Enable/Disable */
5426 WMI_10X_VDEV_PARAM_SGI,
5427 /* Enable LDPC */
5428 WMI_10X_VDEV_PARAM_LDPC,
5429 /* Enable Tx STBC */
5430 WMI_10X_VDEV_PARAM_TX_STBC,
5431 /* Enable Rx STBC */
5432 WMI_10X_VDEV_PARAM_RX_STBC,
5433 /* Intra BSS forwarding */
5434 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
5435 /* Setting Default xmit key for Vdev */
5436 WMI_10X_VDEV_PARAM_DEF_KEYID,
5437 /* NSS width */
5438 WMI_10X_VDEV_PARAM_NSS,
5439 /* Set the custom rate for the broadcast data frames */
5440 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
5441 /* Set the custom rate (rate-code) for multicast data frames */
5442 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
5443 /* Tx multicast packet indicate Enable/Disable */
5444 WMI_10X_VDEV_PARAM_MCAST_INDICATE,
5445 /* Tx DHCP packet indicate Enable/Disable */
5446 WMI_10X_VDEV_PARAM_DHCP_INDICATE,
5447 /* Enable host inspection of Tx unicast packet to unknown destination */
5448 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5449
5450 /* The minimum amount of time AP begins to consider STA inactive */
5451 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5452
5453 /*
5454 * An associated STA is considered inactive when there is no recent
5455 * TX/RX activity and no downlink frames are buffered for it. Once a
5456 * STA exceeds the maximum idle inactive time, the AP will send an
5457 * 802.11 data-null as a keep alive to verify the STA is still
5458 * associated. If the STA does ACK the data-null, or if the data-null
5459 * is buffered and the STA does not retrieve it, the STA will be
5460 * considered unresponsive
5461 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5462 */
5463 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5464
5465 /*
5466 * An associated STA is considered unresponsive if there is no recent
5467 * TX/RX activity and downlink frames are buffered for it. Once a STA
5468 * exceeds the maximum unresponsive time, the AP will send a
5469 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
5470 */
5471 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5472
5473 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5474 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
5475
5476 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
5477 /* Enable/Disable RTS-CTS */
5478 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
5479
5480 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5481
5482 /* following are available as of firmware 10.2 */
5483 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
5484 WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
5485 WMI_10X_VDEV_PARAM_MFPTEST_SET,
5486 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
5487 WMI_10X_VDEV_PARAM_VHT_SGIMASK,
5488 WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
5489 WMI_10X_VDEV_PARAM_TSF_INCREMENT,
5490 };
5491
5492 enum wmi_10_4_vdev_param {
5493 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5494 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5495 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
5496 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
5497 WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
5498 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
5499 WMI_10_4_VDEV_PARAM_SLOT_TIME,
5500 WMI_10_4_VDEV_PARAM_PREAMBLE,
5501 WMI_10_4_VDEV_PARAM_SWBA_TIME,
5502 WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
5503 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
5504 WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
5505 WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
5506 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5507 WMI_10_4_VDEV_PARAM_WDS,
5508 WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
5509 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
5510 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
5511 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
5512 WMI_10_4_VDEV_PARAM_FEATURE_WMM,
5513 WMI_10_4_VDEV_PARAM_CHWIDTH,
5514 WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
5515 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
5516 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
5517 WMI_10_4_VDEV_PARAM_MGMT_RATE,
5518 WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
5519 WMI_10_4_VDEV_PARAM_FIXED_RATE,
5520 WMI_10_4_VDEV_PARAM_SGI,
5521 WMI_10_4_VDEV_PARAM_LDPC,
5522 WMI_10_4_VDEV_PARAM_TX_STBC,
5523 WMI_10_4_VDEV_PARAM_RX_STBC,
5524 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
5525 WMI_10_4_VDEV_PARAM_DEF_KEYID,
5526 WMI_10_4_VDEV_PARAM_NSS,
5527 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
5528 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
5529 WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
5530 WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
5531 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5532 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5533 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5534 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5535 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
5536 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
5537 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
5538 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
5539 WMI_10_4_VDEV_PARAM_TXBF,
5540 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
5541 WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
5542 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
5543 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5544 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
5545 WMI_10_4_VDEV_PARAM_MFPTEST_SET,
5546 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
5547 WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
5548 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
5549 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
5550 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
5551 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
5552 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
5553 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
5554 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
5555 WMI_10_4_VDEV_PARAM_PROXY_STA,
5556 WMI_10_4_VDEV_PARAM_MERU_VC,
5557 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
5558 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
5559 WMI_10_4_VDEV_PARAM_SENSOR_AP,
5560 WMI_10_4_VDEV_PARAM_BEACON_RATE,
5561 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
5562 WMI_10_4_VDEV_PARAM_STA_KICKOUT,
5563 WMI_10_4_VDEV_PARAM_CAPABILITIES,
5564 WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
5565 WMI_10_4_VDEV_PARAM_RX_FILTER,
5566 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
5567 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
5568 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
5569 WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
5570 WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
5571 WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
5572 WMI_10_4_VDEV_PARAM_NSS_VHT160,
5573 WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
5574 WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
5575 WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
5576 WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
5577 WMI_10_4_VDEV_PARAM_TX_POWER,
5578 WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
5579 WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN,
5580 };
5581
5582 #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1
5583
5584 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
5585 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
5586 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
5587 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
5588
5589 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4
5590 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70
5591 #define WMI_TXBF_CONF_IMPLICIT_BF BIT(7)
5592 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8
5593 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00
5594
5595 /* slot time long */
5596 #define WMI_VDEV_SLOT_TIME_LONG 0x1
5597 /* slot time short */
5598 #define WMI_VDEV_SLOT_TIME_SHORT 0x2
5599 /* preablbe long */
5600 #define WMI_VDEV_PREAMBLE_LONG 0x1
5601 /* preablbe short */
5602 #define WMI_VDEV_PREAMBLE_SHORT 0x2
5603
5604 enum wmi_start_event_param {
5605 WMI_VDEV_RESP_START_EVENT = 0,
5606 WMI_VDEV_RESP_RESTART_EVENT,
5607 };
5608
5609 struct wmi_vdev_start_response_event {
5610 __le32 vdev_id;
5611 __le32 req_id;
5612 __le32 resp_type; /* %WMI_VDEV_RESP_ */
5613 __le32 status;
5614 } __packed;
5615
5616 struct wmi_vdev_standby_req_event {
5617 /* unique id identifying the VDEV, generated by the caller */
5618 __le32 vdev_id;
5619 } __packed;
5620
5621 struct wmi_vdev_resume_req_event {
5622 /* unique id identifying the VDEV, generated by the caller */
5623 __le32 vdev_id;
5624 } __packed;
5625
5626 struct wmi_vdev_stopped_event {
5627 /* unique id identifying the VDEV, generated by the caller */
5628 __le32 vdev_id;
5629 } __packed;
5630
5631 /*
5632 * common structure used for simple events
5633 * (stopped, resume_req, standby response)
5634 */
5635 struct wmi_vdev_simple_event {
5636 /* unique id identifying the VDEV, generated by the caller */
5637 __le32 vdev_id;
5638 } __packed;
5639
5640 /* VDEV start response status codes */
5641 /* VDEV successfully started */
5642 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0
5643
5644 /* requested VDEV not found */
5645 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1
5646
5647 /* unsupported VDEV combination */
5648 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2
5649
5650 /* TODO: please add more comments if you have in-depth information */
5651 struct wmi_vdev_spectral_conf_cmd {
5652 __le32 vdev_id;
5653
5654 /* number of fft samples to send (0 for infinite) */
5655 __le32 scan_count;
5656 __le32 scan_period;
5657 __le32 scan_priority;
5658
5659 /* number of bins in the FFT: 2^(fft_size - bin_scale) */
5660 __le32 scan_fft_size;
5661 __le32 scan_gc_ena;
5662 __le32 scan_restart_ena;
5663 __le32 scan_noise_floor_ref;
5664 __le32 scan_init_delay;
5665 __le32 scan_nb_tone_thr;
5666 __le32 scan_str_bin_thr;
5667 __le32 scan_wb_rpt_mode;
5668 __le32 scan_rssi_rpt_mode;
5669 __le32 scan_rssi_thr;
5670 __le32 scan_pwr_format;
5671
5672 /* rpt_mode: Format of FFT report to software for spectral scan
5673 * triggered FFTs:
5674 * 0: No FFT report (only spectral scan summary report)
5675 * 1: 2-dword summary of metrics for each completed FFT + spectral
5676 * scan summary report
5677 * 2: 2-dword summary of metrics for each completed FFT +
5678 * 1x- oversampled bins(in-band) per FFT + spectral scan summary
5679 * report
5680 * 3: 2-dword summary of metrics for each completed FFT +
5681 * 2x- oversampled bins (all) per FFT + spectral scan summary
5682 */
5683 __le32 scan_rpt_mode;
5684 __le32 scan_bin_scale;
5685 __le32 scan_dbm_adj;
5686 __le32 scan_chn_mask;
5687 } __packed;
5688
5689 struct wmi_vdev_spectral_conf_arg {
5690 u32 vdev_id;
5691 u32 scan_count;
5692 u32 scan_period;
5693 u32 scan_priority;
5694 u32 scan_fft_size;
5695 u32 scan_gc_ena;
5696 u32 scan_restart_ena;
5697 u32 scan_noise_floor_ref;
5698 u32 scan_init_delay;
5699 u32 scan_nb_tone_thr;
5700 u32 scan_str_bin_thr;
5701 u32 scan_wb_rpt_mode;
5702 u32 scan_rssi_rpt_mode;
5703 u32 scan_rssi_thr;
5704 u32 scan_pwr_format;
5705 u32 scan_rpt_mode;
5706 u32 scan_bin_scale;
5707 u32 scan_dbm_adj;
5708 u32 scan_chn_mask;
5709 };
5710
5711 #define WMI_SPECTRAL_ENABLE_DEFAULT 0
5712 #define WMI_SPECTRAL_COUNT_DEFAULT 0
5713 #define WMI_SPECTRAL_PERIOD_DEFAULT 35
5714 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1
5715 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7
5716 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1
5717 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0
5718 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96
5719 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80
5720 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12
5721 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8
5722 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0
5723 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0
5724 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0
5725 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0
5726 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2
5727 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1
5728 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1
5729 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1
5730
5731 struct wmi_vdev_spectral_enable_cmd {
5732 __le32 vdev_id;
5733 __le32 trigger_cmd;
5734 __le32 enable_cmd;
5735 } __packed;
5736
5737 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1
5738 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2
5739 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1
5740 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2
5741
5742 /* Beacon processing related command and event structures */
5743 struct wmi_bcn_tx_hdr {
5744 __le32 vdev_id;
5745 __le32 tx_rate;
5746 __le32 tx_power;
5747 __le32 bcn_len;
5748 } __packed;
5749
5750 struct wmi_bcn_tx_cmd {
5751 struct wmi_bcn_tx_hdr hdr;
5752 u8 *bcn[];
5753 } __packed;
5754
5755 struct wmi_bcn_tx_arg {
5756 u32 vdev_id;
5757 u32 tx_rate;
5758 u32 tx_power;
5759 u32 bcn_len;
5760 const void *bcn;
5761 };
5762
5763 enum wmi_bcn_tx_ref_flags {
5764 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5765 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5766 };
5767
5768 /* TODO: It is unclear why "no antenna" works while any other seemingly valid
5769 * chainmask yields no beacons on the air at all.
5770 */
5771 #define WMI_BCN_TX_REF_DEF_ANTENNA 0
5772
5773 struct wmi_bcn_tx_ref_cmd {
5774 __le32 vdev_id;
5775 __le32 data_len;
5776 /* physical address of the frame - dma pointer */
5777 __le32 data_ptr;
5778 /* id for host to track */
5779 __le32 msdu_id;
5780 /* frame ctrl to setup PPDU desc */
5781 __le32 frame_control;
5782 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5783 __le32 flags;
5784 /* introduced in 10.2 */
5785 __le32 antenna_mask;
5786 } __packed;
5787
5788 /* Beacon filter */
5789 #define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */
5790 #define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */
5791 #define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */
5792 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5793 #define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */
5794
5795 struct wmi_bcn_filter_rx_cmd {
5796 /* Filter ID */
5797 __le32 bcn_filter_id;
5798 /* Filter type - wmi_bcn_filter */
5799 __le32 bcn_filter;
5800 /* Buffer len */
5801 __le32 bcn_filter_len;
5802 /* Filter info (threshold, BSSID, RSSI) */
5803 u8 *bcn_filter_buf;
5804 } __packed;
5805
5806 /* Capabilities and IEs to be passed to firmware */
5807 struct wmi_bcn_prb_info {
5808 /* Capabilities */
5809 __le32 caps;
5810 /* ERP info */
5811 __le32 erp;
5812 /* Advanced capabilities */
5813 /* HT capabilities */
5814 /* HT Info */
5815 /* ibss_dfs */
5816 /* wpa Info */
5817 /* rsn Info */
5818 /* rrm info */
5819 /* ath_ext */
5820 /* app IE */
5821 } __packed;
5822
5823 enum wmi_sta_ps_mode {
5824 /* enable power save for the given STA VDEV */
5825 WMI_STA_PS_MODE_DISABLED = 0,
5826 /* disable power save for a given STA VDEV */
5827 WMI_STA_PS_MODE_ENABLED = 1,
5828 };
5829
5830 struct wmi_sta_powersave_mode_cmd {
5831 /* unique id identifying the VDEV, generated by the caller */
5832 __le32 vdev_id;
5833
5834 /*
5835 * Power save mode
5836 * (see enum wmi_sta_ps_mode)
5837 */
5838 __le32 sta_ps_mode;
5839 } __packed;
5840
5841 enum wmi_csa_offload_en {
5842 WMI_CSA_OFFLOAD_DISABLE = 0,
5843 WMI_CSA_OFFLOAD_ENABLE = 1,
5844 };
5845
5846 struct wmi_csa_offload_enable_cmd {
5847 __le32 vdev_id;
5848 __le32 csa_offload_enable;
5849 } __packed;
5850
5851 struct wmi_csa_offload_chanswitch_cmd {
5852 __le32 vdev_id;
5853 struct wmi_channel chan;
5854 } __packed;
5855
5856 /*
5857 * This parameter controls the policy for retrieving frames from AP while the
5858 * STA is in sleep state.
5859 *
5860 * Only takes affect if the sta_ps_mode is enabled
5861 */
5862 enum wmi_sta_ps_param_rx_wake_policy {
5863 /*
5864 * Wake up when ever there is an RX activity on the VDEV. In this mode
5865 * the Power save SM(state machine) will come out of sleep by either
5866 * sending null frame (or) a data frame (with PS==0) in response to TIM
5867 * bit set in the received beacon frame from AP.
5868 */
5869 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5870
5871 /*
5872 * Here the power save state machine will not wakeup in response to TIM
5873 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5874 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all
5875 * access categories are delivery-enabled, the station will send a
5876 * UAPSD trigger frame, otherwise it will send a PS-Poll.
5877 */
5878 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5879 };
5880
5881 /*
5882 * Number of tx frames/beacon that cause the power save SM to wake up.
5883 *
5884 * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5885 * meaning, It will cause the SM to never wake up. This is useful if you want
5886 * to keep the system to sleep all the time for some kind of test mode . host
5887 * can change this parameter any time. It will affect at the next tx frame.
5888 */
5889 enum wmi_sta_ps_param_tx_wake_threshold {
5890 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5891 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5892
5893 /*
5894 * Values greater than one indicate that many TX attempts per beacon
5895 * interval before the STA will wake up
5896 */
5897 };
5898
5899 /*
5900 * The maximum number of PS-Poll frames the FW will send in response to
5901 * traffic advertised in TIM before waking up (by sending a null frame with PS
5902 * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5903 * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5904 * parameter is used when the RX wake policy is
5905 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5906 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5907 */
5908 enum wmi_sta_ps_param_pspoll_count {
5909 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5910 /*
5911 * Values greater than 0 indicate the maximum number of PS-Poll frames
5912 * FW will send before waking up.
5913 */
5914
5915 /* When u-APSD is enabled the firmware will be very reluctant to exit
5916 * STA PS. This could result in very poor Rx performance with STA doing
5917 * PS-Poll for each and every buffered frame. This value is a bit
5918 * arbitrary.
5919 */
5920 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5921 };
5922
5923 /*
5924 * This will include the delivery and trigger enabled state for every AC.
5925 * This is the negotiated state with AP. The host MLME needs to set this based
5926 * on AP capability and the state Set in the association request by the
5927 * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5928 */
5929 #define WMI_UAPSD_AC_TYPE_DELI 0
5930 #define WMI_UAPSD_AC_TYPE_TRIG 1
5931
5932 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5933 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))
5934
5935 enum wmi_sta_ps_param_uapsd {
5936 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5937 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
5938 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5939 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
5940 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5941 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
5942 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5943 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
5944 };
5945
5946 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5947
5948 struct wmi_sta_uapsd_auto_trig_param {
5949 __le32 wmm_ac;
5950 __le32 user_priority;
5951 __le32 service_interval;
5952 __le32 suspend_interval;
5953 __le32 delay_interval;
5954 };
5955
5956 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5957 __le32 vdev_id;
5958 struct wmi_mac_addr peer_macaddr;
5959 __le32 num_ac;
5960 };
5961
5962 struct wmi_sta_uapsd_auto_trig_arg {
5963 u32 wmm_ac;
5964 u32 user_priority;
5965 u32 service_interval;
5966 u32 suspend_interval;
5967 u32 delay_interval;
5968 };
5969
5970 enum wmi_sta_powersave_param {
5971 /*
5972 * Controls how frames are retrievd from AP while STA is sleeping
5973 *
5974 * (see enum wmi_sta_ps_param_rx_wake_policy)
5975 */
5976 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5977
5978 /*
5979 * The STA will go active after this many TX
5980 *
5981 * (see enum wmi_sta_ps_param_tx_wake_threshold)
5982 */
5983 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5984
5985 /*
5986 * Number of PS-Poll to send before STA wakes up
5987 *
5988 * (see enum wmi_sta_ps_param_pspoll_count)
5989 *
5990 */
5991 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5992
5993 /*
5994 * TX/RX inactivity time in msec before going to sleep.
5995 *
5996 * The power save SM will monitor tx/rx activity on the VDEV, if no
5997 * activity for the specified msec of the parameter the Power save
5998 * SM will go to sleep.
5999 */
6000 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
6001
6002 /*
6003 * Set uapsd configuration.
6004 *
6005 * (see enum wmi_sta_ps_param_uapsd)
6006 */
6007 WMI_STA_PS_PARAM_UAPSD = 4,
6008 };
6009
6010 struct wmi_sta_powersave_param_cmd {
6011 __le32 vdev_id;
6012 __le32 param_id; /* %WMI_STA_PS_PARAM_ */
6013 __le32 param_value;
6014 } __packed;
6015
6016 /* No MIMO power save */
6017 #define WMI_STA_MIMO_PS_MODE_DISABLE
6018 /* mimo powersave mode static*/
6019 #define WMI_STA_MIMO_PS_MODE_STATIC
6020 /* mimo powersave mode dynamic */
6021 #define WMI_STA_MIMO_PS_MODE_DYNAMIC
6022
6023 struct wmi_sta_mimo_ps_mode_cmd {
6024 /* unique id identifying the VDEV, generated by the caller */
6025 __le32 vdev_id;
6026 /* mimo powersave mode as defined above */
6027 __le32 mimo_pwrsave_mode;
6028 } __packed;
6029
6030 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */
6031 enum wmi_ap_ps_param_uapsd {
6032 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
6033 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
6034 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
6035 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
6036 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
6037 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
6038 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
6039 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
6040 };
6041
6042 /* U-APSD maximum service period of peer station */
6043 enum wmi_ap_ps_peer_param_max_sp {
6044 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
6045 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
6046 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
6047 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
6048 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
6049 };
6050
6051 /*
6052 * AP power save parameter
6053 * Set a power save specific parameter for a peer station
6054 */
6055 enum wmi_ap_ps_peer_param {
6056 /* Set uapsd configuration for a given peer.
6057 *
6058 * Include the delivery and trigger enabled state for every AC.
6059 * The host MLME needs to set this based on AP capability and stations
6060 * request Set in the association request received from the station.
6061 *
6062 * Lower 8 bits of the value specify the UAPSD configuration.
6063 *
6064 * (see enum wmi_ap_ps_param_uapsd)
6065 * The default value is 0.
6066 */
6067 WMI_AP_PS_PEER_PARAM_UAPSD = 0,
6068
6069 /*
6070 * Set the service period for a UAPSD capable station
6071 *
6072 * The service period from wme ie in the (re)assoc request frame.
6073 *
6074 * (see enum wmi_ap_ps_peer_param_max_sp)
6075 */
6076 WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
6077
6078 /* Time in seconds for aging out buffered frames for STA in PS */
6079 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
6080 };
6081
6082 struct wmi_ap_ps_peer_cmd {
6083 /* unique id identifying the VDEV, generated by the caller */
6084 __le32 vdev_id;
6085
6086 /* peer MAC address */
6087 struct wmi_mac_addr peer_macaddr;
6088
6089 /* AP powersave param (see enum wmi_ap_ps_peer_param) */
6090 __le32 param_id;
6091
6092 /* AP powersave param value */
6093 __le32 param_value;
6094 } __packed;
6095
6096 /* 128 clients = 4 words */
6097 #define WMI_TIM_BITMAP_ARRAY_SIZE 4
6098
6099 struct wmi_tim_info {
6100 __le32 tim_len;
6101 __le32 tim_mcast;
6102 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
6103 __le32 tim_changed;
6104 __le32 tim_num_ps_pending;
6105 } __packed;
6106
6107 struct wmi_tim_info_arg {
6108 __le32 tim_len;
6109 __le32 tim_mcast;
6110 const __le32 *tim_bitmap;
6111 __le32 tim_changed;
6112 __le32 tim_num_ps_pending;
6113 } __packed;
6114
6115 /* Maximum number of NOA Descriptors supported */
6116 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4
6117 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0)
6118 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1
6119 #define WMI_P2P_NOA_CHANGED_BIT BIT(0)
6120
6121 struct wmi_p2p_noa_info {
6122 /* Bit 0 - Flag to indicate an update in NOA schedule
6123 * Bits 7-1 - Reserved
6124 */
6125 u8 changed;
6126 /* NOA index */
6127 u8 index;
6128 /* Bit 0 - Opp PS state of the AP
6129 * Bits 1-7 - Ctwindow in TUs
6130 */
6131 u8 ctwindow_oppps;
6132 /* Number of NOA descriptors */
6133 u8 num_descriptors;
6134
6135 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
6136 } __packed;
6137
6138 struct wmi_bcn_info {
6139 struct wmi_tim_info tim_info;
6140 struct wmi_p2p_noa_info p2p_noa_info;
6141 } __packed;
6142
6143 struct wmi_host_swba_event {
6144 __le32 vdev_map;
6145 struct wmi_bcn_info bcn_info[];
6146 } __packed;
6147
6148 struct wmi_10_2_4_bcn_info {
6149 struct wmi_tim_info tim_info;
6150 /* The 10.2.4 FW doesn't have p2p NOA info */
6151 } __packed;
6152
6153 struct wmi_10_2_4_host_swba_event {
6154 __le32 vdev_map;
6155 struct wmi_10_2_4_bcn_info bcn_info[];
6156 } __packed;
6157
6158 /* 16 words = 512 client + 1 word = for guard */
6159 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
6160
6161 struct wmi_10_4_tim_info {
6162 __le32 tim_len;
6163 __le32 tim_mcast;
6164 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
6165 __le32 tim_changed;
6166 __le32 tim_num_ps_pending;
6167 } __packed;
6168
6169 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
6170
6171 struct wmi_10_4_p2p_noa_info {
6172 /* Bit 0 - Flag to indicate an update in NOA schedule
6173 * Bits 7-1 - Reserved
6174 */
6175 u8 changed;
6176 /* NOA index */
6177 u8 index;
6178 /* Bit 0 - Opp PS state of the AP
6179 * Bits 1-7 - Ctwindow in TUs
6180 */
6181 u8 ctwindow_oppps;
6182 /* Number of NOA descriptors */
6183 u8 num_descriptors;
6184
6185 struct wmi_p2p_noa_descriptor
6186 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
6187 } __packed;
6188
6189 struct wmi_10_4_bcn_info {
6190 struct wmi_10_4_tim_info tim_info;
6191 struct wmi_10_4_p2p_noa_info p2p_noa_info;
6192 } __packed;
6193
6194 struct wmi_10_4_host_swba_event {
6195 __le32 vdev_map;
6196 struct wmi_10_4_bcn_info bcn_info[];
6197 } __packed;
6198
6199 #define WMI_MAX_AP_VDEV 16
6200
6201 struct wmi_tbtt_offset_event {
6202 __le32 vdev_map;
6203 __le32 tbttoffset_list[WMI_MAX_AP_VDEV];
6204 } __packed;
6205
6206 struct wmi_peer_create_cmd {
6207 __le32 vdev_id;
6208 struct wmi_mac_addr peer_macaddr;
6209 __le32 peer_type;
6210 } __packed;
6211
6212 enum wmi_peer_type {
6213 WMI_PEER_TYPE_DEFAULT = 0,
6214 WMI_PEER_TYPE_BSS = 1,
6215 WMI_PEER_TYPE_TDLS = 2,
6216 };
6217
6218 struct wmi_peer_delete_cmd {
6219 __le32 vdev_id;
6220 struct wmi_mac_addr peer_macaddr;
6221 } __packed;
6222
6223 struct wmi_peer_flush_tids_cmd {
6224 __le32 vdev_id;
6225 struct wmi_mac_addr peer_macaddr;
6226 __le32 peer_tid_bitmap;
6227 } __packed;
6228
6229 struct wmi_fixed_rate {
6230 /*
6231 * rate mode . 0: disable fixed rate (auto rate)
6232 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps
6233 * 2: ht20 11n rate specified as mcs index
6234 * 3: ht40 11n rate specified as mcs index
6235 */
6236 __le32 rate_mode;
6237 /*
6238 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
6239 * and series 3 is stored at byte 3 (MSB)
6240 */
6241 __le32 rate_series;
6242 /*
6243 * 4 retry counts for 4 rate series. retry count for rate 0 is stored
6244 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
6245 * (MSB)
6246 */
6247 __le32 rate_retries;
6248 } __packed;
6249
6250 struct wmi_peer_fixed_rate_cmd {
6251 /* unique id identifying the VDEV, generated by the caller */
6252 __le32 vdev_id;
6253 /* peer MAC address */
6254 struct wmi_mac_addr peer_macaddr;
6255 /* fixed rate */
6256 struct wmi_fixed_rate peer_fixed_rate;
6257 } __packed;
6258
6259 #define WMI_MGMT_TID 17
6260
6261 struct wmi_addba_clear_resp_cmd {
6262 /* unique id identifying the VDEV, generated by the caller */
6263 __le32 vdev_id;
6264 /* peer MAC address */
6265 struct wmi_mac_addr peer_macaddr;
6266 } __packed;
6267
6268 struct wmi_addba_send_cmd {
6269 /* unique id identifying the VDEV, generated by the caller */
6270 __le32 vdev_id;
6271 /* peer MAC address */
6272 struct wmi_mac_addr peer_macaddr;
6273 /* Tid number */
6274 __le32 tid;
6275 /* Buffer/Window size*/
6276 __le32 buffersize;
6277 } __packed;
6278
6279 struct wmi_delba_send_cmd {
6280 /* unique id identifying the VDEV, generated by the caller */
6281 __le32 vdev_id;
6282 /* peer MAC address */
6283 struct wmi_mac_addr peer_macaddr;
6284 /* Tid number */
6285 __le32 tid;
6286 /* Is Initiator */
6287 __le32 initiator;
6288 /* Reason code */
6289 __le32 reasoncode;
6290 } __packed;
6291
6292 struct wmi_addba_setresponse_cmd {
6293 /* unique id identifying the vdev, generated by the caller */
6294 __le32 vdev_id;
6295 /* peer mac address */
6296 struct wmi_mac_addr peer_macaddr;
6297 /* Tid number */
6298 __le32 tid;
6299 /* status code */
6300 __le32 statuscode;
6301 } __packed;
6302
6303 struct wmi_send_singleamsdu_cmd {
6304 /* unique id identifying the vdev, generated by the caller */
6305 __le32 vdev_id;
6306 /* peer mac address */
6307 struct wmi_mac_addr peer_macaddr;
6308 /* Tid number */
6309 __le32 tid;
6310 } __packed;
6311
6312 enum wmi_peer_smps_state {
6313 WMI_PEER_SMPS_PS_NONE = 0x0,
6314 WMI_PEER_SMPS_STATIC = 0x1,
6315 WMI_PEER_SMPS_DYNAMIC = 0x2
6316 };
6317
6318 enum wmi_peer_chwidth {
6319 WMI_PEER_CHWIDTH_20MHZ = 0,
6320 WMI_PEER_CHWIDTH_40MHZ = 1,
6321 WMI_PEER_CHWIDTH_80MHZ = 2,
6322 WMI_PEER_CHWIDTH_160MHZ = 3,
6323 };
6324
6325 enum wmi_peer_param {
6326 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
6327 WMI_PEER_AMPDU = 0x2,
6328 WMI_PEER_AUTHORIZE = 0x3,
6329 WMI_PEER_CHAN_WIDTH = 0x4,
6330 WMI_PEER_NSS = 0x5,
6331 WMI_PEER_USE_4ADDR = 0x6,
6332 WMI_PEER_USE_FIXED_PWR = 0x8,
6333 WMI_PEER_PARAM_FIXED_RATE = 0x9,
6334 WMI_PEER_DEBUG = 0xa,
6335 WMI_PEER_PHYMODE = 0xd,
6336 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */
6337 };
6338
6339 struct wmi_peer_set_param_cmd {
6340 __le32 vdev_id;
6341 struct wmi_mac_addr peer_macaddr;
6342 __le32 param_id;
6343 __le32 param_value;
6344 } __packed;
6345
6346 #define MAX_SUPPORTED_RATES 128
6347
6348 struct wmi_rate_set {
6349 /* total number of rates */
6350 __le32 num_rates;
6351 /*
6352 * rates (each 8bit value) packed into a 32 bit word.
6353 * the rates are filled from least significant byte to most
6354 * significant byte.
6355 */
6356 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
6357 } __packed;
6358
6359 struct wmi_rate_set_arg {
6360 unsigned int num_rates;
6361 u8 rates[MAX_SUPPORTED_RATES];
6362 };
6363
6364 /*
6365 * NOTE: It would bea good idea to represent the Tx MCS
6366 * info in one word and Rx in another word. This is split
6367 * into multiple words for convenience
6368 */
6369 struct wmi_vht_rate_set {
6370 __le32 rx_max_rate; /* Max Rx data rate */
6371 __le32 rx_mcs_set; /* Negotiated RX VHT rates */
6372 __le32 tx_max_rate; /* Max Tx data rate */
6373 __le32 tx_mcs_set; /* Negotiated TX VHT rates */
6374 } __packed;
6375
6376 struct wmi_vht_rate_set_arg {
6377 u32 rx_max_rate;
6378 u32 rx_mcs_set;
6379 u32 tx_max_rate;
6380 u32 tx_mcs_set;
6381 };
6382
6383 struct wmi_peer_set_rates_cmd {
6384 /* peer MAC address */
6385 struct wmi_mac_addr peer_macaddr;
6386 /* legacy rate set */
6387 struct wmi_rate_set peer_legacy_rates;
6388 /* ht rate set */
6389 struct wmi_rate_set peer_ht_rates;
6390 } __packed;
6391
6392 struct wmi_peer_set_q_empty_callback_cmd {
6393 /* unique id identifying the VDEV, generated by the caller */
6394 __le32 vdev_id;
6395 /* peer MAC address */
6396 struct wmi_mac_addr peer_macaddr;
6397 __le32 callback_enable;
6398 } __packed;
6399
6400 struct wmi_peer_flags_map {
6401 u32 auth;
6402 u32 qos;
6403 u32 need_ptk_4_way;
6404 u32 need_gtk_2_way;
6405 u32 apsd;
6406 u32 ht;
6407 u32 bw40;
6408 u32 stbc;
6409 u32 ldbc;
6410 u32 dyn_mimops;
6411 u32 static_mimops;
6412 u32 spatial_mux;
6413 u32 vht;
6414 u32 bw80;
6415 u32 vht_2g;
6416 u32 pmf;
6417 u32 bw160;
6418 };
6419
6420 enum wmi_peer_flags {
6421 WMI_PEER_AUTH = 0x00000001,
6422 WMI_PEER_QOS = 0x00000002,
6423 WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
6424 WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
6425 WMI_PEER_APSD = 0x00000800,
6426 WMI_PEER_HT = 0x00001000,
6427 WMI_PEER_40MHZ = 0x00002000,
6428 WMI_PEER_STBC = 0x00008000,
6429 WMI_PEER_LDPC = 0x00010000,
6430 WMI_PEER_DYN_MIMOPS = 0x00020000,
6431 WMI_PEER_STATIC_MIMOPS = 0x00040000,
6432 WMI_PEER_SPATIAL_MUX = 0x00200000,
6433 WMI_PEER_VHT = 0x02000000,
6434 WMI_PEER_80MHZ = 0x04000000,
6435 WMI_PEER_VHT_2G = 0x08000000,
6436 WMI_PEER_PMF = 0x10000000,
6437 WMI_PEER_160MHZ = 0x20000000
6438 };
6439
6440 enum wmi_10x_peer_flags {
6441 WMI_10X_PEER_AUTH = 0x00000001,
6442 WMI_10X_PEER_QOS = 0x00000002,
6443 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
6444 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
6445 WMI_10X_PEER_APSD = 0x00000800,
6446 WMI_10X_PEER_HT = 0x00001000,
6447 WMI_10X_PEER_40MHZ = 0x00002000,
6448 WMI_10X_PEER_STBC = 0x00008000,
6449 WMI_10X_PEER_LDPC = 0x00010000,
6450 WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
6451 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
6452 WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
6453 WMI_10X_PEER_VHT = 0x02000000,
6454 WMI_10X_PEER_80MHZ = 0x04000000,
6455 WMI_10X_PEER_160MHZ = 0x20000000
6456 };
6457
6458 enum wmi_10_2_peer_flags {
6459 WMI_10_2_PEER_AUTH = 0x00000001,
6460 WMI_10_2_PEER_QOS = 0x00000002,
6461 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
6462 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
6463 WMI_10_2_PEER_APSD = 0x00000800,
6464 WMI_10_2_PEER_HT = 0x00001000,
6465 WMI_10_2_PEER_40MHZ = 0x00002000,
6466 WMI_10_2_PEER_STBC = 0x00008000,
6467 WMI_10_2_PEER_LDPC = 0x00010000,
6468 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
6469 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
6470 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
6471 WMI_10_2_PEER_VHT = 0x02000000,
6472 WMI_10_2_PEER_80MHZ = 0x04000000,
6473 WMI_10_2_PEER_VHT_2G = 0x08000000,
6474 WMI_10_2_PEER_PMF = 0x10000000,
6475 WMI_10_2_PEER_160MHZ = 0x20000000
6476 };
6477
6478 /*
6479 * Peer rate capabilities.
6480 *
6481 * This is of interest to the ratecontrol
6482 * module which resides in the firmware. The bit definitions are
6483 * consistent with that defined in if_athrate.c.
6484 */
6485 #define WMI_RC_DS_FLAG 0x01
6486 #define WMI_RC_CW40_FLAG 0x02
6487 #define WMI_RC_SGI_FLAG 0x04
6488 #define WMI_RC_HT_FLAG 0x08
6489 #define WMI_RC_RTSCTS_FLAG 0x10
6490 #define WMI_RC_TX_STBC_FLAG 0x20
6491 #define WMI_RC_RX_STBC_FLAG 0xC0
6492 #define WMI_RC_RX_STBC_FLAG_S 6
6493 #define WMI_RC_WEP_TKIP_FLAG 0x100
6494 #define WMI_RC_TS_FLAG 0x200
6495 #define WMI_RC_UAPSD_FLAG 0x400
6496
6497 /* Maximum listen interval supported by hw in units of beacon interval */
6498 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5
6499
6500 struct wmi_common_peer_assoc_complete_cmd {
6501 struct wmi_mac_addr peer_macaddr;
6502 __le32 vdev_id;
6503 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
6504 __le32 peer_associd; /* 16 LSBs */
6505 __le32 peer_flags;
6506 __le32 peer_caps; /* 16 LSBs */
6507 __le32 peer_listen_intval;
6508 __le32 peer_ht_caps;
6509 __le32 peer_max_mpdu;
6510 __le32 peer_mpdu_density; /* 0..16 */
6511 __le32 peer_rate_caps;
6512 struct wmi_rate_set peer_legacy_rates;
6513 struct wmi_rate_set peer_ht_rates;
6514 __le32 peer_nss; /* num of spatial streams */
6515 __le32 peer_vht_caps;
6516 __le32 peer_phymode;
6517 struct wmi_vht_rate_set peer_vht_rates;
6518 };
6519
6520 struct wmi_main_peer_assoc_complete_cmd {
6521 struct wmi_common_peer_assoc_complete_cmd cmd;
6522
6523 /* HT Operation Element of the peer. Five bytes packed in 2
6524 * INT32 array and filled from lsb to msb.
6525 */
6526 __le32 peer_ht_info[2];
6527 } __packed;
6528
6529 struct wmi_10_1_peer_assoc_complete_cmd {
6530 struct wmi_common_peer_assoc_complete_cmd cmd;
6531 } __packed;
6532
6533 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
6534 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
6535 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
6536 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
6537
6538 struct wmi_10_2_peer_assoc_complete_cmd {
6539 struct wmi_common_peer_assoc_complete_cmd cmd;
6540 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
6541 } __packed;
6542
6543 /* NSS Mapping to FW */
6544 #define WMI_PEER_NSS_MAP_ENABLE BIT(31)
6545 #define WMI_PEER_NSS_160MHZ_MASK GENMASK(2, 0)
6546 #define WMI_PEER_NSS_80_80MHZ_MASK GENMASK(5, 3)
6547
6548 struct wmi_10_4_peer_assoc_complete_cmd {
6549 struct wmi_10_2_peer_assoc_complete_cmd cmd;
6550 __le32 peer_bw_rxnss_override;
6551 } __packed;
6552
6553 struct wmi_peer_assoc_complete_arg {
6554 u8 addr[ETH_ALEN];
6555 u32 vdev_id;
6556 bool peer_reassoc;
6557 u16 peer_aid;
6558 u32 peer_flags; /* see %WMI_PEER_ */
6559 u16 peer_caps;
6560 u32 peer_listen_intval;
6561 u32 peer_ht_caps;
6562 u32 peer_max_mpdu;
6563 u32 peer_mpdu_density; /* 0..16 */
6564 u32 peer_rate_caps; /* see %WMI_RC_ */
6565 struct wmi_rate_set_arg peer_legacy_rates;
6566 struct wmi_rate_set_arg peer_ht_rates;
6567 u32 peer_num_spatial_streams;
6568 u32 peer_vht_caps;
6569 enum wmi_phy_mode peer_phymode;
6570 struct wmi_vht_rate_set_arg peer_vht_rates;
6571 u32 peer_bw_rxnss_override;
6572 };
6573
6574 struct wmi_peer_add_wds_entry_cmd {
6575 /* peer MAC address */
6576 struct wmi_mac_addr peer_macaddr;
6577 /* wds MAC addr */
6578 struct wmi_mac_addr wds_macaddr;
6579 } __packed;
6580
6581 struct wmi_peer_remove_wds_entry_cmd {
6582 /* wds MAC addr */
6583 struct wmi_mac_addr wds_macaddr;
6584 } __packed;
6585
6586 struct wmi_peer_q_empty_callback_event {
6587 /* peer MAC address */
6588 struct wmi_mac_addr peer_macaddr;
6589 } __packed;
6590
6591 /*
6592 * Channel info WMI event
6593 */
6594 struct wmi_chan_info_event {
6595 __le32 err_code;
6596 __le32 freq;
6597 __le32 cmd_flags;
6598 __le32 noise_floor;
6599 __le32 rx_clear_count;
6600 __le32 cycle_count;
6601 } __packed;
6602
6603 struct wmi_10_4_chan_info_event {
6604 __le32 err_code;
6605 __le32 freq;
6606 __le32 cmd_flags;
6607 __le32 noise_floor;
6608 __le32 rx_clear_count;
6609 __le32 cycle_count;
6610 __le32 chan_tx_pwr_range;
6611 __le32 chan_tx_pwr_tp;
6612 __le32 rx_frame_count;
6613 } __packed;
6614
6615 struct wmi_peer_sta_kickout_event {
6616 struct wmi_mac_addr peer_macaddr;
6617 } __packed;
6618
6619 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
6620 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
6621
6622 /* Beacon filter wmi command info */
6623 #define BCN_FLT_MAX_SUPPORTED_IES 256
6624 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32)
6625
6626 struct bss_bcn_stats {
6627 __le32 vdev_id;
6628 __le32 bss_bcnsdropped;
6629 __le32 bss_bcnsdelivered;
6630 } __packed;
6631
6632 struct bcn_filter_stats {
6633 __le32 bcns_dropped;
6634 __le32 bcns_delivered;
6635 __le32 activefilters;
6636 struct bss_bcn_stats bss_stats;
6637 } __packed;
6638
6639 struct wmi_add_bcn_filter_cmd {
6640 u32 vdev_id;
6641 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
6642 } __packed;
6643
6644 enum wmi_sta_keepalive_method {
6645 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
6646 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
6647 };
6648
6649 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
6650
6651 /* Firmware crashes if keepalive interval exceeds this limit */
6652 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
6653
6654 /* note: ip4 addresses are in network byte order, i.e. big endian */
6655 struct wmi_sta_keepalive_arp_resp {
6656 __be32 src_ip4_addr;
6657 __be32 dest_ip4_addr;
6658 struct wmi_mac_addr dest_mac_addr;
6659 } __packed;
6660
6661 struct wmi_sta_keepalive_cmd {
6662 __le32 vdev_id;
6663 __le32 enabled;
6664 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
6665 __le32 interval; /* in seconds */
6666 struct wmi_sta_keepalive_arp_resp arp_resp;
6667 } __packed;
6668
6669 struct wmi_sta_keepalive_arg {
6670 u32 vdev_id;
6671 u32 enabled;
6672 u32 method;
6673 u32 interval;
6674 __be32 src_ip4_addr;
6675 __be32 dest_ip4_addr;
6676 const u8 dest_mac_addr[ETH_ALEN];
6677 };
6678
6679 enum wmi_force_fw_hang_type {
6680 WMI_FORCE_FW_HANG_ASSERT = 1,
6681 WMI_FORCE_FW_HANG_NO_DETECT,
6682 WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6683 WMI_FORCE_FW_HANG_EMPTY_POINT,
6684 WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6685 WMI_FORCE_FW_HANG_INFINITE_LOOP,
6686 };
6687
6688 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6689
6690 struct wmi_force_fw_hang_cmd {
6691 __le32 type;
6692 __le32 delay_ms;
6693 } __packed;
6694
6695 enum wmi_pdev_reset_mode_type {
6696 WMI_RST_MODE_TX_FLUSH = 1,
6697 WMI_RST_MODE_WARM_RESET,
6698 WMI_RST_MODE_COLD_RESET,
6699 WMI_RST_MODE_WARM_RESET_RESTORE_CAL,
6700 WMI_RST_MODE_COLD_RESET_RESTORE_CAL,
6701 WMI_RST_MODE_MAX,
6702 };
6703
6704 enum ath10k_dbglog_level {
6705 ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
6706 ATH10K_DBGLOG_LEVEL_INFO = 1,
6707 ATH10K_DBGLOG_LEVEL_WARN = 2,
6708 ATH10K_DBGLOG_LEVEL_ERR = 3,
6709 };
6710
6711 /* VAP ids to enable dbglog */
6712 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0
6713 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff
6714
6715 /* to enable dbglog in the firmware */
6716 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16
6717 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
6718
6719 /* timestamp resolution */
6720 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17
6721 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000
6722
6723 /* number of queued messages before sending them to the host */
6724 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20
6725 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000
6726
6727 /*
6728 * Log levels to enable. This defines the minimum level to enable, this is
6729 * not a bitmask. See enum ath10k_dbglog_level for the values.
6730 */
6731 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28
6732 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000
6733
6734 /*
6735 * Note: this is a cleaned up version of a struct firmware uses. For
6736 * example, config_valid was hidden inside an array.
6737 */
6738 struct wmi_dbglog_cfg_cmd {
6739 /* bitmask to hold mod id config*/
6740 __le32 module_enable;
6741
6742 /* see ATH10K_DBGLOG_CFG_ */
6743 __le32 config_enable;
6744
6745 /* mask of module id bits to be changed */
6746 __le32 module_valid;
6747
6748 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6749 __le32 config_valid;
6750 } __packed;
6751
6752 struct wmi_10_4_dbglog_cfg_cmd {
6753 /* bitmask to hold mod id config*/
6754 __le64 module_enable;
6755
6756 /* see ATH10K_DBGLOG_CFG_ */
6757 __le32 config_enable;
6758
6759 /* mask of module id bits to be changed */
6760 __le64 module_valid;
6761
6762 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6763 __le32 config_valid;
6764 } __packed;
6765
6766 enum wmi_roam_reason {
6767 WMI_ROAM_REASON_BETTER_AP = 1,
6768 WMI_ROAM_REASON_BEACON_MISS = 2,
6769 WMI_ROAM_REASON_LOW_RSSI = 3,
6770 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
6771 WMI_ROAM_REASON_HO_FAILED = 5,
6772
6773 /* keep last */
6774 WMI_ROAM_REASON_MAX,
6775 };
6776
6777 struct wmi_roam_ev {
6778 __le32 vdev_id;
6779 __le32 reason;
6780 } __packed;
6781
6782 #define ATH10K_FRAGMT_THRESHOLD_MIN 540
6783 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346
6784
6785 #define WMI_MAX_EVENT 0x1000
6786 /* Maximum number of pending TXed WMI packets */
6787 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6788
6789 /* By default disable power save for IBSS */
6790 #define ATH10K_DEFAULT_ATIM 0
6791
6792 #define WMI_MAX_MEM_REQS 16
6793
6794 struct wmi_scan_ev_arg {
6795 __le32 event_type; /* %WMI_SCAN_EVENT_ */
6796 __le32 reason; /* %WMI_SCAN_REASON_ */
6797 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
6798 __le32 scan_req_id;
6799 __le32 scan_id;
6800 __le32 vdev_id;
6801 };
6802
6803 struct mgmt_tx_compl_params {
6804 u32 desc_id;
6805 u32 status;
6806 u32 ppdu_id;
6807 int ack_rssi;
6808 };
6809
6810 struct wmi_tlv_mgmt_tx_compl_ev_arg {
6811 __le32 desc_id;
6812 __le32 status;
6813 __le32 pdev_id;
6814 __le32 ppdu_id;
6815 __le32 ack_rssi;
6816 };
6817
6818 struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg {
6819 __le32 num_reports;
6820 const __le32 *desc_ids;
6821 const __le32 *status;
6822 const __le32 *ppdu_ids;
6823 const __le32 *ack_rssi;
6824 };
6825
6826 struct wmi_peer_delete_resp_ev_arg {
6827 __le32 vdev_id;
6828 struct wmi_mac_addr peer_addr;
6829 };
6830
6831 #define WMI_MGMT_RX_NUM_RSSI 4
6832 struct wmi_mgmt_rx_ev_arg {
6833 __le32 channel;
6834 __le32 snr;
6835 __le32 rate;
6836 __le32 phy_mode;
6837 __le32 buf_len;
6838 __le32 status; /* %WMI_RX_STATUS_ */
6839 struct wmi_mgmt_rx_ext_info ext_info;
6840 __le32 rssi[WMI_MGMT_RX_NUM_RSSI];
6841 };
6842
6843 struct wmi_ch_info_ev_arg {
6844 __le32 err_code;
6845 __le32 freq;
6846 __le32 cmd_flags;
6847 __le32 noise_floor;
6848 __le32 rx_clear_count;
6849 __le32 cycle_count;
6850 __le32 chan_tx_pwr_range;
6851 __le32 chan_tx_pwr_tp;
6852 __le32 rx_frame_count;
6853 __le32 my_bss_rx_cycle_count;
6854 __le32 rx_11b_mode_data_duration;
6855 __le32 tx_frame_cnt;
6856 __le32 mac_clk_mhz;
6857 };
6858
6859 /* From 10.4 firmware, not sure all have the same values. */
6860 enum wmi_vdev_start_status {
6861 WMI_VDEV_START_OK = 0,
6862 WMI_VDEV_START_CHAN_INVALID,
6863 };
6864
6865 struct wmi_vdev_start_ev_arg {
6866 __le32 vdev_id;
6867 __le32 req_id;
6868 __le32 resp_type; /* %WMI_VDEV_RESP_ */
6869 __le32 status; /* See wmi_vdev_start_status enum above */
6870 };
6871
6872 struct wmi_peer_kick_ev_arg {
6873 const u8 *mac_addr;
6874 };
6875
6876 struct wmi_swba_ev_arg {
6877 __le32 vdev_map;
6878 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
6879 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
6880 };
6881
6882 struct wmi_phyerr_ev_arg {
6883 u32 tsf_timestamp;
6884 u16 freq1;
6885 u16 freq2;
6886 u8 rssi_combined;
6887 u8 chan_width_mhz;
6888 u8 phy_err_code;
6889 u16 nf_chains[4];
6890 u32 buf_len;
6891 const u8 *buf;
6892 u8 hdr_len;
6893 };
6894
6895 struct wmi_phyerr_hdr_arg {
6896 u32 num_phyerrs;
6897 u32 tsf_l32;
6898 u32 tsf_u32;
6899 u32 buf_len;
6900 const void *phyerrs;
6901 };
6902
6903 struct wmi_dfs_status_ev_arg {
6904 u32 status;
6905 };
6906
6907 struct wmi_svc_rdy_ev_arg {
6908 __le32 min_tx_power;
6909 __le32 max_tx_power;
6910 __le32 ht_cap;
6911 __le32 vht_cap;
6912 __le32 vht_supp_mcs;
6913 __le32 sw_ver0;
6914 __le32 sw_ver1;
6915 __le32 fw_build;
6916 __le32 phy_capab;
6917 __le32 num_rf_chains;
6918 __le32 eeprom_rd;
6919 __le32 num_mem_reqs;
6920 __le32 low_2ghz_chan;
6921 __le32 high_2ghz_chan;
6922 __le32 low_5ghz_chan;
6923 __le32 high_5ghz_chan;
6924 __le32 sys_cap_info;
6925 const __le32 *service_map;
6926 size_t service_map_len;
6927 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6928 };
6929
6930 struct wmi_svc_avail_ev_arg {
6931 bool service_map_ext_valid;
6932 __le32 service_map_ext_len;
6933 const __le32 *service_map_ext;
6934 };
6935
6936 struct wmi_rdy_ev_arg {
6937 __le32 sw_version;
6938 __le32 abi_version;
6939 __le32 status;
6940 const u8 *mac_addr;
6941 };
6942
6943 struct wmi_roam_ev_arg {
6944 __le32 vdev_id;
6945 __le32 reason;
6946 __le32 rssi;
6947 };
6948
6949 struct wmi_echo_ev_arg {
6950 __le32 value;
6951 };
6952
6953 struct wmi_pdev_temperature_event {
6954 /* temperature value in Celsius degree */
6955 __le32 temperature;
6956 } __packed;
6957
6958 struct wmi_pdev_bss_chan_info_event {
6959 __le32 freq;
6960 __le32 noise_floor;
6961 __le64 cycle_busy;
6962 __le64 cycle_total;
6963 __le64 cycle_tx;
6964 __le64 cycle_rx;
6965 __le64 cycle_rx_bss;
6966 __le32 reserved;
6967 } __packed;
6968
6969 /* WOW structures */
6970 enum wmi_wow_wakeup_event {
6971 WOW_BMISS_EVENT = 0,
6972 WOW_BETTER_AP_EVENT,
6973 WOW_DEAUTH_RECVD_EVENT,
6974 WOW_MAGIC_PKT_RECVD_EVENT,
6975 WOW_GTK_ERR_EVENT,
6976 WOW_FOURWAY_HSHAKE_EVENT,
6977 WOW_EAPOL_RECVD_EVENT,
6978 WOW_NLO_DETECTED_EVENT,
6979 WOW_DISASSOC_RECVD_EVENT,
6980 WOW_PATTERN_MATCH_EVENT,
6981 WOW_CSA_IE_EVENT,
6982 WOW_PROBE_REQ_WPS_IE_EVENT,
6983 WOW_AUTH_REQ_EVENT,
6984 WOW_ASSOC_REQ_EVENT,
6985 WOW_HTT_EVENT,
6986 WOW_RA_MATCH_EVENT,
6987 WOW_HOST_AUTO_SHUTDOWN_EVENT,
6988 WOW_IOAC_MAGIC_EVENT,
6989 WOW_IOAC_SHORT_EVENT,
6990 WOW_IOAC_EXTEND_EVENT,
6991 WOW_IOAC_TIMER_EVENT,
6992 WOW_DFS_PHYERR_RADAR_EVENT,
6993 WOW_BEACON_EVENT,
6994 WOW_CLIENT_KICKOUT_EVENT,
6995 WOW_EVENT_MAX,
6996 };
6997
6998 #define C2S(x) case x: return #x
6999
wow_wakeup_event(enum wmi_wow_wakeup_event ev)7000 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
7001 {
7002 switch (ev) {
7003 C2S(WOW_BMISS_EVENT);
7004 C2S(WOW_BETTER_AP_EVENT);
7005 C2S(WOW_DEAUTH_RECVD_EVENT);
7006 C2S(WOW_MAGIC_PKT_RECVD_EVENT);
7007 C2S(WOW_GTK_ERR_EVENT);
7008 C2S(WOW_FOURWAY_HSHAKE_EVENT);
7009 C2S(WOW_EAPOL_RECVD_EVENT);
7010 C2S(WOW_NLO_DETECTED_EVENT);
7011 C2S(WOW_DISASSOC_RECVD_EVENT);
7012 C2S(WOW_PATTERN_MATCH_EVENT);
7013 C2S(WOW_CSA_IE_EVENT);
7014 C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
7015 C2S(WOW_AUTH_REQ_EVENT);
7016 C2S(WOW_ASSOC_REQ_EVENT);
7017 C2S(WOW_HTT_EVENT);
7018 C2S(WOW_RA_MATCH_EVENT);
7019 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
7020 C2S(WOW_IOAC_MAGIC_EVENT);
7021 C2S(WOW_IOAC_SHORT_EVENT);
7022 C2S(WOW_IOAC_EXTEND_EVENT);
7023 C2S(WOW_IOAC_TIMER_EVENT);
7024 C2S(WOW_DFS_PHYERR_RADAR_EVENT);
7025 C2S(WOW_BEACON_EVENT);
7026 C2S(WOW_CLIENT_KICKOUT_EVENT);
7027 C2S(WOW_EVENT_MAX);
7028 default:
7029 return NULL;
7030 }
7031 }
7032
7033 enum wmi_wow_wake_reason {
7034 WOW_REASON_UNSPECIFIED = -1,
7035 WOW_REASON_NLOD = 0,
7036 WOW_REASON_AP_ASSOC_LOST,
7037 WOW_REASON_LOW_RSSI,
7038 WOW_REASON_DEAUTH_RECVD,
7039 WOW_REASON_DISASSOC_RECVD,
7040 WOW_REASON_GTK_HS_ERR,
7041 WOW_REASON_EAP_REQ,
7042 WOW_REASON_FOURWAY_HS_RECV,
7043 WOW_REASON_TIMER_INTR_RECV,
7044 WOW_REASON_PATTERN_MATCH_FOUND,
7045 WOW_REASON_RECV_MAGIC_PATTERN,
7046 WOW_REASON_P2P_DISC,
7047 WOW_REASON_WLAN_HB,
7048 WOW_REASON_CSA_EVENT,
7049 WOW_REASON_PROBE_REQ_WPS_IE_RECV,
7050 WOW_REASON_AUTH_REQ_RECV,
7051 WOW_REASON_ASSOC_REQ_RECV,
7052 WOW_REASON_HTT_EVENT,
7053 WOW_REASON_RA_MATCH,
7054 WOW_REASON_HOST_AUTO_SHUTDOWN,
7055 WOW_REASON_IOAC_MAGIC_EVENT,
7056 WOW_REASON_IOAC_SHORT_EVENT,
7057 WOW_REASON_IOAC_EXTEND_EVENT,
7058 WOW_REASON_IOAC_TIMER_EVENT,
7059 WOW_REASON_ROAM_HO,
7060 WOW_REASON_DFS_PHYERR_RADADR_EVENT,
7061 WOW_REASON_BEACON_RECV,
7062 WOW_REASON_CLIENT_KICKOUT_EVENT,
7063 WOW_REASON_DEBUG_TEST = 0xFF,
7064 };
7065
wow_reason(enum wmi_wow_wake_reason reason)7066 static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
7067 {
7068 switch (reason) {
7069 C2S(WOW_REASON_UNSPECIFIED);
7070 C2S(WOW_REASON_NLOD);
7071 C2S(WOW_REASON_AP_ASSOC_LOST);
7072 C2S(WOW_REASON_LOW_RSSI);
7073 C2S(WOW_REASON_DEAUTH_RECVD);
7074 C2S(WOW_REASON_DISASSOC_RECVD);
7075 C2S(WOW_REASON_GTK_HS_ERR);
7076 C2S(WOW_REASON_EAP_REQ);
7077 C2S(WOW_REASON_FOURWAY_HS_RECV);
7078 C2S(WOW_REASON_TIMER_INTR_RECV);
7079 C2S(WOW_REASON_PATTERN_MATCH_FOUND);
7080 C2S(WOW_REASON_RECV_MAGIC_PATTERN);
7081 C2S(WOW_REASON_P2P_DISC);
7082 C2S(WOW_REASON_WLAN_HB);
7083 C2S(WOW_REASON_CSA_EVENT);
7084 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
7085 C2S(WOW_REASON_AUTH_REQ_RECV);
7086 C2S(WOW_REASON_ASSOC_REQ_RECV);
7087 C2S(WOW_REASON_HTT_EVENT);
7088 C2S(WOW_REASON_RA_MATCH);
7089 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
7090 C2S(WOW_REASON_IOAC_MAGIC_EVENT);
7091 C2S(WOW_REASON_IOAC_SHORT_EVENT);
7092 C2S(WOW_REASON_IOAC_EXTEND_EVENT);
7093 C2S(WOW_REASON_IOAC_TIMER_EVENT);
7094 C2S(WOW_REASON_ROAM_HO);
7095 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
7096 C2S(WOW_REASON_BEACON_RECV);
7097 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
7098 C2S(WOW_REASON_DEBUG_TEST);
7099 default:
7100 return NULL;
7101 }
7102 }
7103
7104 #undef C2S
7105
7106 struct wmi_wow_ev_arg {
7107 u32 vdev_id;
7108 u32 flag;
7109 enum wmi_wow_wake_reason wake_reason;
7110 u32 data_len;
7111 };
7112
7113 #define WOW_MIN_PATTERN_SIZE 1
7114 #define WOW_MAX_PATTERN_SIZE 148
7115 #define WOW_MAX_PKT_OFFSET 128
7116 #define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \
7117 sizeof(struct rfc1042_hdr))
7118 #define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \
7119 offsetof(struct ieee80211_hdr_3addr, addr1))
7120
7121 enum wmi_tdls_state {
7122 WMI_TDLS_DISABLE,
7123 WMI_TDLS_ENABLE_PASSIVE,
7124 WMI_TDLS_ENABLE_ACTIVE,
7125 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
7126 };
7127
7128 enum wmi_tdls_peer_state {
7129 WMI_TDLS_PEER_STATE_PEERING,
7130 WMI_TDLS_PEER_STATE_CONNECTED,
7131 WMI_TDLS_PEER_STATE_TEARDOWN,
7132 };
7133
7134 struct wmi_tdls_peer_update_cmd_arg {
7135 u32 vdev_id;
7136 enum wmi_tdls_peer_state peer_state;
7137 u8 addr[ETH_ALEN];
7138 };
7139
7140 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
7141
7142 #define WMI_TDLS_PEER_SP_MASK 0x60
7143 #define WMI_TDLS_PEER_SP_LSB 5
7144
7145 enum wmi_tdls_options {
7146 WMI_TDLS_OFFCHAN_EN = BIT(0),
7147 WMI_TDLS_BUFFER_STA_EN = BIT(1),
7148 WMI_TDLS_SLEEP_STA_EN = BIT(2),
7149 };
7150
7151 enum {
7152 WMI_TDLS_PEER_QOS_AC_VO = BIT(0),
7153 WMI_TDLS_PEER_QOS_AC_VI = BIT(1),
7154 WMI_TDLS_PEER_QOS_AC_BK = BIT(2),
7155 WMI_TDLS_PEER_QOS_AC_BE = BIT(3),
7156 };
7157
7158 struct wmi_tdls_peer_capab_arg {
7159 u8 peer_uapsd_queues;
7160 u8 peer_max_sp;
7161 u32 buff_sta_support;
7162 u32 off_chan_support;
7163 u32 peer_curr_operclass;
7164 u32 self_curr_operclass;
7165 u32 peer_chan_len;
7166 u32 peer_operclass_len;
7167 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7168 u32 is_peer_responder;
7169 u32 pref_offchan_num;
7170 u32 pref_offchan_bw;
7171 };
7172
7173 struct wmi_10_4_tdls_set_state_cmd {
7174 __le32 vdev_id;
7175 __le32 state;
7176 __le32 notification_interval_ms;
7177 __le32 tx_discovery_threshold;
7178 __le32 tx_teardown_threshold;
7179 __le32 rssi_teardown_threshold;
7180 __le32 rssi_delta;
7181 __le32 tdls_options;
7182 __le32 tdls_peer_traffic_ind_window;
7183 __le32 tdls_peer_traffic_response_timeout_ms;
7184 __le32 tdls_puapsd_mask;
7185 __le32 tdls_puapsd_inactivity_time_ms;
7186 __le32 tdls_puapsd_rx_frame_threshold;
7187 __le32 teardown_notification_ms;
7188 __le32 tdls_peer_kickout_threshold;
7189 } __packed;
7190
7191 struct wmi_tdls_peer_capabilities {
7192 __le32 peer_qos;
7193 __le32 buff_sta_support;
7194 __le32 off_chan_support;
7195 __le32 peer_curr_operclass;
7196 __le32 self_curr_operclass;
7197 __le32 peer_chan_len;
7198 __le32 peer_operclass_len;
7199 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7200 __le32 is_peer_responder;
7201 __le32 pref_offchan_num;
7202 __le32 pref_offchan_bw;
7203 union {
7204 /* to match legacy implementation allocate room for
7205 * at least one record even if peer_chan_len is 0
7206 */
7207 struct wmi_channel peer_chan_min_allocation;
7208 DECLARE_FLEX_ARRAY(struct wmi_channel, peer_chan_list);
7209 };
7210 } __packed;
7211
7212 struct wmi_10_4_tdls_peer_update_cmd {
7213 __le32 vdev_id;
7214 struct wmi_mac_addr peer_macaddr;
7215 __le32 peer_state;
7216 __le32 reserved[4];
7217 struct wmi_tdls_peer_capabilities peer_capab;
7218 } __packed;
7219
7220 enum wmi_tdls_peer_reason {
7221 WMI_TDLS_TEARDOWN_REASON_TX,
7222 WMI_TDLS_TEARDOWN_REASON_RSSI,
7223 WMI_TDLS_TEARDOWN_REASON_SCAN,
7224 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
7225 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
7226 WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
7227 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
7228 WMI_TDLS_ENTER_BUF_STA,
7229 WMI_TDLS_EXIT_BUF_STA,
7230 WMI_TDLS_ENTER_BT_BUSY_MODE,
7231 WMI_TDLS_EXIT_BT_BUSY_MODE,
7232 WMI_TDLS_SCAN_STARTED_EVENT,
7233 WMI_TDLS_SCAN_COMPLETED_EVENT,
7234 };
7235
7236 enum wmi_tdls_peer_notification {
7237 WMI_TDLS_SHOULD_DISCOVER,
7238 WMI_TDLS_SHOULD_TEARDOWN,
7239 WMI_TDLS_PEER_DISCONNECTED,
7240 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
7241 };
7242
7243 struct wmi_tdls_peer_event {
7244 struct wmi_mac_addr peer_macaddr;
7245 /* see enum wmi_tdls_peer_notification*/
7246 __le32 peer_status;
7247 /* see enum wmi_tdls_peer_reason */
7248 __le32 peer_reason;
7249 __le32 vdev_id;
7250 } __packed;
7251
7252 enum wmi_tid_aggr_control_conf {
7253 WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
7254 WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
7255 WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
7256 };
7257
7258 enum wmi_noack_tid_conf {
7259 WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
7260 WMI_PEER_TID_CONFIG_ACK,
7261 WMI_PEER_TID_CONFIG_NOACK,
7262 };
7263
7264 enum wmi_tid_rate_ctrl_conf {
7265 WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
7266 WMI_TID_CONFIG_RATE_CONTROL_AUTO,
7267 WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
7268 WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
7269 WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
7270 };
7271
7272 enum wmi_tid_rtscts_control_conf {
7273 WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
7274 WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
7275 };
7276
7277 enum wmi_ext_tid_config_map {
7278 WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
7279 };
7280
7281 struct wmi_per_peer_per_tid_cfg_arg {
7282 u32 vdev_id;
7283 struct wmi_mac_addr peer_macaddr;
7284 u32 tid;
7285 enum wmi_noack_tid_conf ack_policy;
7286 enum wmi_tid_aggr_control_conf aggr_control;
7287 u8 rate_ctrl;
7288 u32 retry_count;
7289 u32 rcode_flags;
7290 u32 ext_tid_cfg_bitmap;
7291 u32 rtscts_ctrl;
7292 };
7293
7294 struct wmi_peer_per_tid_cfg_cmd {
7295 __le32 vdev_id;
7296 struct wmi_mac_addr peer_macaddr;
7297 __le32 tid;
7298
7299 /* see enum wmi_noack_tid_conf */
7300 __le32 ack_policy;
7301
7302 /* see enum wmi_tid_aggr_control_conf */
7303 __le32 aggr_control;
7304
7305 /* see enum wmi_tid_rate_ctrl_conf */
7306 __le32 rate_control;
7307 __le32 rcode_flags;
7308 __le32 retry_count;
7309
7310 /* See enum wmi_ext_tid_config_map */
7311 __le32 ext_tid_cfg_bitmap;
7312
7313 /* see enum wmi_tid_rtscts_control_conf */
7314 __le32 rtscts_ctrl;
7315 } __packed;
7316
7317 enum wmi_txbf_conf {
7318 WMI_TXBF_CONF_UNSUPPORTED,
7319 WMI_TXBF_CONF_BEFORE_ASSOC,
7320 WMI_TXBF_CONF_AFTER_ASSOC,
7321 };
7322
7323 #define WMI_CCA_DETECT_LEVEL_AUTO 0
7324 #define WMI_CCA_DETECT_MARGIN_AUTO 0
7325
7326 struct wmi_pdev_set_adaptive_cca_params {
7327 __le32 enable;
7328 __le32 cca_detect_level;
7329 __le32 cca_detect_margin;
7330 } __packed;
7331
7332 #define WMI_PNO_MAX_SCHED_SCAN_PLANS 2
7333 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200
7334 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100
7335 #define WMI_PNO_MAX_NETW_CHANNELS 26
7336 #define WMI_PNO_MAX_NETW_CHANNELS_EX 60
7337 #define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID
7338 #define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN
7339
7340 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/
7341 #define WMI_PNO_MAX_PB_REQ_SIZE 450
7342
7343 #define WMI_PNO_24G_DEFAULT_CH 1
7344 #define WMI_PNO_5G_DEFAULT_CH 36
7345
7346 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40
7347 #define WMI_PASSIVE_MAX_CHANNEL_TIME 110
7348
7349 /* SSID broadcast type */
7350 enum wmi_SSID_bcast_type {
7351 BCAST_UNKNOWN = 0,
7352 BCAST_NORMAL = 1,
7353 BCAST_HIDDEN = 2,
7354 };
7355
7356 struct wmi_network_type {
7357 struct wmi_ssid ssid;
7358 u32 authentication;
7359 u32 encryption;
7360 u32 bcast_nw_type;
7361 u8 channel_count;
7362 u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];
7363 s32 rssi_threshold;
7364 } __packed;
7365
7366 struct wmi_pno_scan_req {
7367 u8 enable;
7368 u8 vdev_id;
7369 u8 uc_networks_count;
7370 struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];
7371 u32 fast_scan_period;
7372 u32 slow_scan_period;
7373 u8 fast_scan_max_cycles;
7374
7375 bool do_passive_scan;
7376
7377 u32 delay_start_time;
7378 u32 active_min_time;
7379 u32 active_max_time;
7380 u32 passive_min_time;
7381 u32 passive_max_time;
7382
7383 /* mac address randomization attributes */
7384 u32 enable_pno_scan_randomization;
7385 u8 mac_addr[ETH_ALEN];
7386 u8 mac_addr_mask[ETH_ALEN];
7387 } __packed;
7388
7389 enum wmi_host_platform_type {
7390 WMI_HOST_PLATFORM_HIGH_PERF,
7391 WMI_HOST_PLATFORM_LOW_PERF,
7392 };
7393
7394 enum wmi_bss_survey_req_type {
7395 WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
7396 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
7397 };
7398
7399 struct wmi_pdev_chan_info_req_cmd {
7400 __le32 type;
7401 __le32 reserved;
7402 } __packed;
7403
7404 /* bb timing register configurations */
7405 struct wmi_bb_timing_cfg_arg {
7406 /* Tx_end to pa off timing */
7407 u32 bb_tx_timing;
7408
7409 /* Tx_end to external pa off timing */
7410 u32 bb_xpa_timing;
7411 };
7412
7413 struct wmi_pdev_bb_timing_cfg_cmd {
7414 /* Tx_end to pa off timing */
7415 __le32 bb_tx_timing;
7416
7417 /* Tx_end to external pa off timing */
7418 __le32 bb_xpa_timing;
7419 } __packed;
7420
7421 struct ath10k;
7422 struct ath10k_vif;
7423 struct ath10k_fw_stats_pdev;
7424 struct ath10k_fw_stats_peer;
7425 struct ath10k_fw_stats;
7426
7427 int ath10k_wmi_attach(struct ath10k *ar);
7428 void ath10k_wmi_detach(struct ath10k *ar);
7429 void ath10k_wmi_free_host_mem(struct ath10k *ar);
7430 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
7431 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
7432
7433 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
7434 int ath10k_wmi_connect(struct ath10k *ar);
7435
7436 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
7437 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
7438 u32 cmd_id);
7439 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);
7440
7441 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
7442 struct ath10k_fw_stats_pdev *dst);
7443 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
7444 struct ath10k_fw_stats_pdev *dst);
7445 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
7446 struct ath10k_fw_stats_pdev *dst);
7447 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
7448 struct ath10k_fw_stats_pdev *dst);
7449 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
7450 struct ath10k_fw_stats_peer *dst);
7451 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
7452 struct wmi_host_mem_chunks *chunks);
7453 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
7454 const struct wmi_start_scan_arg *arg);
7455 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
7456 const struct wmi_wmm_params_arg *arg);
7457 void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
7458 const struct wmi_channel_arg *arg);
7459 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
7460
7461 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
7462 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
7463 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb);
7464 int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb);
7465 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
7466 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
7467 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
7468 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
7469 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
7470 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
7471 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
7472 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
7473 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
7474 void ath10k_wmi_event_dfs(struct ath10k *ar,
7475 struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
7476 void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
7477 struct wmi_phyerr_ev_arg *phyerr,
7478 u64 tsf);
7479 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
7480 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
7481 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
7482 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
7483 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
7484 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
7485 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
7486 struct sk_buff *skb);
7487 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
7488 struct sk_buff *skb);
7489 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
7490 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
7491 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
7492 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
7493 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
7494 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
7495 struct sk_buff *skb);
7496 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
7497 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
7498 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
7499 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
7500 struct sk_buff *skb);
7501 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
7502 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
7503 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
7504 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
7505 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
7506 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb);
7507 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
7508 int left_len, struct wmi_phyerr_ev_arg *arg);
7509 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
7510 struct ath10k_fw_stats *fw_stats,
7511 char *buf);
7512 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
7513 struct ath10k_fw_stats *fw_stats,
7514 char *buf);
7515 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
7516 struct ath10k_fw_stats *fw_stats,
7517 char *buf);
7518 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
7519 enum wmi_vdev_subtype subtype);
7520 int ath10k_wmi_barrier(struct ath10k *ar);
7521 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
7522 u32 num_tx_chain);
7523 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb);
7524
7525 #endif /* _WMI_H_ */
7526