1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * Copyright 2018-2020 Broadcom.
4 */
5
6 #ifndef BCM_VK_H
7 #define BCM_VK_H
8
9 #include <linux/atomic.h>
10 #include <linux/firmware.h>
11 #include <linux/irq.h>
12 #include <linux/kref.h>
13 #include <linux/miscdevice.h>
14 #include <linux/mutex.h>
15 #include <linux/pci.h>
16 #include <linux/poll.h>
17 #include <linux/sched/signal.h>
18 #include <linux/tty.h>
19 #include <linux/uaccess.h>
20 #include <uapi/linux/misc/bcm_vk.h>
21
22 #include "bcm_vk_msg.h"
23
24 #define DRV_MODULE_NAME "bcm-vk"
25
26 /*
27 * Load Image is completed in two stages:
28 *
29 * 1) When the VK device boot-up, M7 CPU runs and executes the BootROM.
30 * The Secure Boot Loader (SBL) as part of the BootROM will run
31 * to open up ITCM for host to push BOOT1 image.
32 * SBL will authenticate the image before jumping to BOOT1 image.
33 *
34 * 2) Because BOOT1 image is a secured image, we also called it the
35 * Secure Boot Image (SBI). At second stage, SBI will initialize DDR
36 * and wait for host to push BOOT2 image to DDR.
37 * SBI will authenticate the image before jumping to BOOT2 image.
38 *
39 */
40 /* Location of registers of interest in BAR0 */
41
42 /* Request register for Secure Boot Loader (SBL) download */
43 #define BAR_CODEPUSH_SBL 0x400
44 /* Start of ITCM */
45 #define CODEPUSH_BOOT1_ENTRY 0x00400000
46 #define CODEPUSH_MASK 0xfffff000
47 #define CODEPUSH_BOOTSTART BIT(0)
48
49 /* Boot Status register */
50 #define BAR_BOOT_STATUS 0x404
51
52 #define SRAM_OPEN BIT(16)
53 #define DDR_OPEN BIT(17)
54
55 /* Firmware loader progress status definitions */
56 #define FW_LOADER_ACK_SEND_MORE_DATA BIT(18)
57 #define FW_LOADER_ACK_IN_PROGRESS BIT(19)
58 #define FW_LOADER_ACK_RCVD_ALL_DATA BIT(20)
59
60 /* Boot1/2 is running in standalone mode */
61 #define BOOT_STDALONE_RUNNING BIT(21)
62
63 /* definitions for boot status register */
64 #define BOOT_STATE_MASK (0xffffffff & \
65 ~(FW_LOADER_ACK_SEND_MORE_DATA | \
66 FW_LOADER_ACK_IN_PROGRESS | \
67 BOOT_STDALONE_RUNNING))
68
69 #define BOOT_ERR_SHIFT 4
70 #define BOOT_ERR_MASK (0xf << BOOT_ERR_SHIFT)
71 #define BOOT_PROG_MASK 0xf
72
73 #define BROM_STATUS_NOT_RUN 0x2
74 #define BROM_NOT_RUN (SRAM_OPEN | BROM_STATUS_NOT_RUN)
75 #define BROM_STATUS_COMPLETE 0x6
76 #define BROM_RUNNING (SRAM_OPEN | BROM_STATUS_COMPLETE)
77 #define BOOT1_STATUS_COMPLETE 0x6
78 #define BOOT1_RUNNING (DDR_OPEN | BOOT1_STATUS_COMPLETE)
79 #define BOOT2_STATUS_COMPLETE 0x6
80 #define BOOT2_RUNNING (FW_LOADER_ACK_RCVD_ALL_DATA | \
81 BOOT2_STATUS_COMPLETE)
82
83 /* Boot request for Secure Boot Image (SBI) */
84 #define BAR_CODEPUSH_SBI 0x408
85 /* 64M mapped to BAR2 */
86 #define CODEPUSH_BOOT2_ENTRY 0x60000000
87
88 #define BAR_CARD_STATUS 0x410
89 /* CARD_STATUS definitions */
90 #define CARD_STATUS_TTYVK0_READY BIT(0)
91 #define CARD_STATUS_TTYVK1_READY BIT(1)
92
93 #define BAR_BOOT1_STDALONE_PROGRESS 0x420
94 #define BOOT1_STDALONE_SUCCESS (BIT(13) | BIT(14))
95 #define BOOT1_STDALONE_PROGRESS_MASK BOOT1_STDALONE_SUCCESS
96
97 #define BAR_METADATA_VERSION 0x440
98 #define BAR_OS_UPTIME 0x444
99 #define BAR_CHIP_ID 0x448
100 #define MAJOR_SOC_REV(_chip_id) (((_chip_id) >> 20) & 0xf)
101
102 #define BAR_CARD_TEMPERATURE 0x45c
103 /* defines for all temperature sensor */
104 #define BCM_VK_TEMP_FIELD_MASK 0xff
105 #define BCM_VK_CPU_TEMP_SHIFT 0
106 #define BCM_VK_DDR0_TEMP_SHIFT 8
107 #define BCM_VK_DDR1_TEMP_SHIFT 16
108
109 #define BAR_CARD_VOLTAGE 0x460
110 /* defines for voltage rail conversion */
111 #define BCM_VK_VOLT_RAIL_MASK 0xffff
112 #define BCM_VK_3P3_VOLT_REG_SHIFT 16
113
114 #define BAR_CARD_ERR_LOG 0x464
115 /* Error log register bit definition - register for error alerts */
116 #define ERR_LOG_UECC BIT(0)
117 #define ERR_LOG_SSIM_BUSY BIT(1)
118 #define ERR_LOG_AFBC_BUSY BIT(2)
119 #define ERR_LOG_HIGH_TEMP_ERR BIT(3)
120 #define ERR_LOG_WDOG_TIMEOUT BIT(4)
121 #define ERR_LOG_SYS_FAULT BIT(5)
122 #define ERR_LOG_RAMDUMP BIT(6)
123 #define ERR_LOG_COP_WDOG_TIMEOUT BIT(7)
124 /* warnings */
125 #define ERR_LOG_MEM_ALLOC_FAIL BIT(8)
126 #define ERR_LOG_LOW_TEMP_WARN BIT(9)
127 #define ERR_LOG_ECC BIT(10)
128 #define ERR_LOG_IPC_DWN BIT(11)
129
130 /* Alert bit definitions detectd on host */
131 #define ERR_LOG_HOST_INTF_V_FAIL BIT(13)
132 #define ERR_LOG_HOST_HB_FAIL BIT(14)
133 #define ERR_LOG_HOST_PCIE_DWN BIT(15)
134
135 #define BAR_CARD_ERR_MEM 0x468
136 /* defines for mem err, all fields have same width */
137 #define BCM_VK_MEM_ERR_FIELD_MASK 0xff
138 #define BCM_VK_ECC_MEM_ERR_SHIFT 0
139 #define BCM_VK_UECC_MEM_ERR_SHIFT 8
140 /* threshold of event occurrence and logs start to come out */
141 #define BCM_VK_ECC_THRESHOLD 10
142 #define BCM_VK_UECC_THRESHOLD 1
143
144 #define BAR_CARD_PWR_AND_THRE 0x46c
145 /* defines for power and temp threshold, all fields have same width */
146 #define BCM_VK_PWR_AND_THRE_FIELD_MASK 0xff
147 #define BCM_VK_LOW_TEMP_THRE_SHIFT 0
148 #define BCM_VK_HIGH_TEMP_THRE_SHIFT 8
149 #define BCM_VK_PWR_STATE_SHIFT 16
150
151 #define BAR_CARD_STATIC_INFO 0x470
152
153 #define BAR_INTF_VER 0x47c
154 #define BAR_INTF_VER_MAJOR_SHIFT 16
155 #define BAR_INTF_VER_MASK 0xffff
156 /*
157 * major and minor semantic version numbers supported
158 * Please update as required on interface changes
159 */
160 #define SEMANTIC_MAJOR 1
161 #define SEMANTIC_MINOR 0
162
163 /*
164 * first door bell reg, ie for queue = 0. Only need the first one, as
165 * we will use the queue number to derive the others
166 */
167 #define VK_BAR0_REGSEG_DB_BASE 0x484
168 #define VK_BAR0_REGSEG_DB_REG_GAP 8 /*
169 * DB register gap,
170 * DB1 at 0x48c and DB2 at 0x494
171 */
172
173 /* reset register and specific values */
174 #define VK_BAR0_RESET_DB_NUM 3
175 #define VK_BAR0_RESET_DB_SOFT 0xffffffff
176 #define VK_BAR0_RESET_DB_HARD 0xfffffffd
177 #define VK_BAR0_RESET_RAMPDUMP 0xa0000000
178
179 #define VK_BAR0_Q_DB_BASE(q_num) (VK_BAR0_REGSEG_DB_BASE + \
180 ((q_num) * VK_BAR0_REGSEG_DB_REG_GAP))
181 #define VK_BAR0_RESET_DB_BASE (VK_BAR0_REGSEG_DB_BASE + \
182 (VK_BAR0_RESET_DB_NUM * VK_BAR0_REGSEG_DB_REG_GAP))
183
184 #define BAR_BOOTSRC_SELECT 0xc78
185 /* BOOTSRC definitions */
186 #define BOOTSRC_SOFT_ENABLE BIT(14)
187
188 /* Card OS Firmware version size */
189 #define BAR_FIRMWARE_TAG_SIZE 50
190 #define FIRMWARE_STATUS_PRE_INIT_DONE 0x1f
191
192 /* VK MSG_ID defines */
193 #define VK_MSG_ID_BITMAP_SIZE 4096
194 #define VK_MSG_ID_BITMAP_MASK (VK_MSG_ID_BITMAP_SIZE - 1)
195 #define VK_MSG_ID_OVERFLOW 0xffff
196
197 /*
198 * BAR1
199 */
200
201 /* BAR1 message q definition */
202
203 /* indicate if msgq ctrl in BAR1 is populated */
204 #define VK_BAR1_MSGQ_DEF_RDY 0x60c0
205 /* ready marker value for the above location, normal boot2 */
206 #define VK_BAR1_MSGQ_RDY_MARKER 0xbeefcafe
207 /* ready marker value for the above location, normal boot2 */
208 #define VK_BAR1_DIAG_RDY_MARKER 0xdeadcafe
209 /* number of msgqs in BAR1 */
210 #define VK_BAR1_MSGQ_NR 0x60c4
211 /* BAR1 queue control structure offset */
212 #define VK_BAR1_MSGQ_CTRL_OFF 0x60c8
213
214 /* BAR1 ucode and boot1 version tag */
215 #define VK_BAR1_UCODE_VER_TAG 0x6170
216 #define VK_BAR1_BOOT1_VER_TAG 0x61b0
217 #define VK_BAR1_VER_TAG_SIZE 64
218
219 /* Memory to hold the DMA buffer memory address allocated for boot2 download */
220 #define VK_BAR1_DMA_BUF_OFF_HI 0x61e0
221 #define VK_BAR1_DMA_BUF_OFF_LO (VK_BAR1_DMA_BUF_OFF_HI + 4)
222 #define VK_BAR1_DMA_BUF_SZ (VK_BAR1_DMA_BUF_OFF_HI + 8)
223
224 /* Scratch memory allocated on host for VK */
225 #define VK_BAR1_SCRATCH_OFF_HI 0x61f0
226 #define VK_BAR1_SCRATCH_OFF_LO (VK_BAR1_SCRATCH_OFF_HI + 4)
227 #define VK_BAR1_SCRATCH_SZ_ADDR (VK_BAR1_SCRATCH_OFF_HI + 8)
228 #define VK_BAR1_SCRATCH_DEF_NR_PAGES 32
229
230 /* BAR1 DAUTH info */
231 #define VK_BAR1_DAUTH_BASE_ADDR 0x6200
232 #define VK_BAR1_DAUTH_STORE_SIZE 0x48
233 #define VK_BAR1_DAUTH_VALID_SIZE 0x8
234 #define VK_BAR1_DAUTH_MAX 4
235 #define VK_BAR1_DAUTH_STORE_ADDR(x) \
236 (VK_BAR1_DAUTH_BASE_ADDR + \
237 (x) * (VK_BAR1_DAUTH_STORE_SIZE + VK_BAR1_DAUTH_VALID_SIZE))
238 #define VK_BAR1_DAUTH_VALID_ADDR(x) \
239 (VK_BAR1_DAUTH_STORE_ADDR(x) + VK_BAR1_DAUTH_STORE_SIZE)
240
241 /* BAR1 SOTP AUTH and REVID info */
242 #define VK_BAR1_SOTP_REVID_BASE_ADDR 0x6340
243 #define VK_BAR1_SOTP_REVID_SIZE 0x10
244 #define VK_BAR1_SOTP_REVID_MAX 2
245 #define VK_BAR1_SOTP_REVID_ADDR(x) \
246 (VK_BAR1_SOTP_REVID_BASE_ADDR + (x) * VK_BAR1_SOTP_REVID_SIZE)
247
248 /* VK device supports a maximum of 3 bars */
249 #define MAX_BAR 3
250
251 /* default number of msg blk for inband SGL */
252 #define BCM_VK_DEF_IB_SGL_BLK_LEN 16
253 #define BCM_VK_IB_SGL_BLK_MAX 24
254
255 enum pci_barno {
256 BAR_0 = 0,
257 BAR_1,
258 BAR_2
259 };
260
261 #ifdef CONFIG_BCM_VK_TTY
262 #define BCM_VK_NUM_TTY 2
263 #else
264 #define BCM_VK_NUM_TTY 0
265 #endif
266
267 struct bcm_vk_tty {
268 struct tty_port port;
269 u32 to_offset; /* bar offset to use */
270 u32 to_size; /* to VK buffer size */
271 u32 wr; /* write offset shadow */
272 u32 from_offset; /* bar offset to use */
273 u32 from_size; /* from VK buffer size */
274 u32 rd; /* read offset shadow */
275 pid_t pid;
276 bool irq_enabled;
277 bool is_opened; /* tracks tty open/close */
278 };
279
280 /* VK device max power state, supports 3, full, reduced and low */
281 #define MAX_OPP 3
282 #define MAX_CARD_INFO_TAG_SIZE 64
283
284 struct bcm_vk_card_info {
285 u32 version;
286 char os_tag[MAX_CARD_INFO_TAG_SIZE];
287 char cmpt_tag[MAX_CARD_INFO_TAG_SIZE];
288 u32 cpu_freq_mhz;
289 u32 cpu_scale[MAX_OPP];
290 u32 ddr_freq_mhz;
291 u32 ddr_size_MB;
292 u32 video_core_freq_mhz;
293 };
294
295 /* DAUTH related info */
296 struct bcm_vk_dauth_key {
297 char store[VK_BAR1_DAUTH_STORE_SIZE];
298 char valid[VK_BAR1_DAUTH_VALID_SIZE];
299 };
300
301 struct bcm_vk_dauth_info {
302 struct bcm_vk_dauth_key keys[VK_BAR1_DAUTH_MAX];
303 };
304
305 /*
306 * Control structure of logging messages from the card. This
307 * buffer is for logmsg that comes from vk
308 */
309 struct bcm_vk_peer_log {
310 u32 rd_idx;
311 u32 wr_idx;
312 u32 buf_size;
313 u32 mask;
314 char data[];
315 };
316
317 /* max buf size allowed */
318 #define BCM_VK_PEER_LOG_BUF_MAX SZ_16K
319 /* max size per line of peer log */
320 #define BCM_VK_PEER_LOG_LINE_MAX 256
321
322 /*
323 * single entry for processing type + utilization
324 */
325 #define BCM_VK_PROC_TYPE_TAG_LEN 8
326 struct bcm_vk_proc_mon_entry_t {
327 char tag[BCM_VK_PROC_TYPE_TAG_LEN];
328 u32 used;
329 u32 max; /**< max capacity */
330 };
331
332 /**
333 * Structure for run time utilization
334 */
335 #define BCM_VK_PROC_MON_MAX 8 /* max entries supported */
336 struct bcm_vk_proc_mon_info {
337 u32 num; /**< no of entries */
338 u32 entry_size; /**< per entry size */
339 struct bcm_vk_proc_mon_entry_t entries[BCM_VK_PROC_MON_MAX];
340 };
341
342 struct bcm_vk_hb_ctrl {
343 struct delayed_work work;
344 u32 last_uptime;
345 u32 lost_cnt;
346 };
347
348 struct bcm_vk_alert {
349 u16 flags;
350 u16 notfs;
351 };
352
353 /* some alert counters that the driver will keep track */
354 struct bcm_vk_alert_cnts {
355 u16 ecc;
356 u16 uecc;
357 };
358
359 struct bcm_vk {
360 struct pci_dev *pdev;
361 void __iomem *bar[MAX_BAR];
362 int num_irqs;
363
364 struct bcm_vk_card_info card_info;
365 struct bcm_vk_proc_mon_info proc_mon_info;
366 struct bcm_vk_dauth_info dauth_info;
367
368 /* mutex to protect the ioctls */
369 struct mutex mutex;
370 struct miscdevice miscdev;
371 int devid; /* dev id allocated */
372
373 #ifdef CONFIG_BCM_VK_TTY
374 struct tty_driver *tty_drv;
375 struct timer_list serial_timer;
376 struct bcm_vk_tty tty[BCM_VK_NUM_TTY];
377 struct workqueue_struct *tty_wq_thread;
378 struct work_struct tty_wq_work;
379 #endif
380
381 /* Reference-counting to handle file operations */
382 struct kref kref;
383
384 spinlock_t msg_id_lock; /* Spinlock for msg_id */
385 u16 msg_id;
386 DECLARE_BITMAP(bmap, VK_MSG_ID_BITMAP_SIZE);
387 spinlock_t ctx_lock; /* Spinlock for component context */
388 struct bcm_vk_ctx ctx[VK_CMPT_CTX_MAX];
389 struct bcm_vk_ht_entry pid_ht[VK_PID_HT_SZ];
390 pid_t reset_pid; /* process that issue reset */
391
392 atomic_t msgq_inited; /* indicate if info has been synced with vk */
393 struct bcm_vk_msg_chan to_v_msg_chan;
394 struct bcm_vk_msg_chan to_h_msg_chan;
395
396 struct workqueue_struct *wq_thread;
397 struct work_struct wq_work; /* work queue for deferred job */
398 unsigned long wq_offload[1]; /* various flags on wq requested */
399 void *tdma_vaddr; /* test dma segment virtual addr */
400 dma_addr_t tdma_addr; /* test dma segment bus addr */
401
402 struct notifier_block panic_nb;
403 u32 ib_sgl_size; /* size allocated for inband sgl insertion */
404
405 /* heart beat mechanism control structure */
406 struct bcm_vk_hb_ctrl hb_ctrl;
407 /* house-keeping variable of error logs */
408 spinlock_t host_alert_lock; /* protection to access host_alert struct */
409 struct bcm_vk_alert host_alert;
410 struct bcm_vk_alert peer_alert; /* bits set by the card */
411 struct bcm_vk_alert_cnts alert_cnts;
412
413 /* offset of the peer log control in BAR2 */
414 u32 peerlog_off;
415 struct bcm_vk_peer_log peerlog_info; /* record of peer log info */
416 /* offset of processing monitoring info in BAR2 */
417 u32 proc_mon_off;
418 };
419
420 /* wq offload work items bits definitions */
421 enum bcm_vk_wq_offload_flags {
422 BCM_VK_WQ_DWNLD_PEND = 0,
423 BCM_VK_WQ_DWNLD_AUTO = 1,
424 BCM_VK_WQ_NOTF_PEND = 2,
425 };
426
427 /* a macro to get an individual field with mask and shift */
428 #define BCM_VK_EXTRACT_FIELD(_field, _reg, _mask, _shift) \
429 (_field = (((_reg) >> (_shift)) & (_mask)))
430
431 struct bcm_vk_entry {
432 const u32 mask;
433 const u32 exp_val;
434 const char *str;
435 };
436
437 /* alerts that could be generated from peer */
438 #define BCM_VK_PEER_ERR_NUM 12
439 extern struct bcm_vk_entry const bcm_vk_peer_err[BCM_VK_PEER_ERR_NUM];
440 /* alerts detected by the host */
441 #define BCM_VK_HOST_ERR_NUM 3
442 extern struct bcm_vk_entry const bcm_vk_host_err[BCM_VK_HOST_ERR_NUM];
443
444 /*
445 * check if PCIe interface is down on read. Use it when it is
446 * certain that _val should never be all ones.
447 */
448 #define BCM_VK_INTF_IS_DOWN(val) ((val) == 0xffffffff)
449
vkread32(struct bcm_vk * vk,enum pci_barno bar,u64 offset)450 static inline u32 vkread32(struct bcm_vk *vk, enum pci_barno bar, u64 offset)
451 {
452 return readl(vk->bar[bar] + offset);
453 }
454
vkwrite32(struct bcm_vk * vk,u32 value,enum pci_barno bar,u64 offset)455 static inline void vkwrite32(struct bcm_vk *vk,
456 u32 value,
457 enum pci_barno bar,
458 u64 offset)
459 {
460 writel(value, vk->bar[bar] + offset);
461 }
462
vkread8(struct bcm_vk * vk,enum pci_barno bar,u64 offset)463 static inline u8 vkread8(struct bcm_vk *vk, enum pci_barno bar, u64 offset)
464 {
465 return readb(vk->bar[bar] + offset);
466 }
467
vkwrite8(struct bcm_vk * vk,u8 value,enum pci_barno bar,u64 offset)468 static inline void vkwrite8(struct bcm_vk *vk,
469 u8 value,
470 enum pci_barno bar,
471 u64 offset)
472 {
473 writeb(value, vk->bar[bar] + offset);
474 }
475
bcm_vk_msgq_marker_valid(struct bcm_vk * vk)476 static inline bool bcm_vk_msgq_marker_valid(struct bcm_vk *vk)
477 {
478 u32 rdy_marker = 0;
479 u32 fw_status;
480
481 fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS);
482
483 if ((fw_status & VK_FWSTS_READY) == VK_FWSTS_READY)
484 rdy_marker = vkread32(vk, BAR_1, VK_BAR1_MSGQ_DEF_RDY);
485
486 return (rdy_marker == VK_BAR1_MSGQ_RDY_MARKER);
487 }
488
489 int bcm_vk_open(struct inode *inode, struct file *p_file);
490 ssize_t bcm_vk_read(struct file *p_file, char __user *buf, size_t count,
491 loff_t *f_pos);
492 ssize_t bcm_vk_write(struct file *p_file, const char __user *buf,
493 size_t count, loff_t *f_pos);
494 __poll_t bcm_vk_poll(struct file *p_file, struct poll_table_struct *wait);
495 int bcm_vk_release(struct inode *inode, struct file *p_file);
496 void bcm_vk_release_data(struct kref *kref);
497 irqreturn_t bcm_vk_msgq_irqhandler(int irq, void *dev_id);
498 irqreturn_t bcm_vk_notf_irqhandler(int irq, void *dev_id);
499 irqreturn_t bcm_vk_tty_irqhandler(int irq, void *dev_id);
500 int bcm_vk_msg_init(struct bcm_vk *vk);
501 void bcm_vk_msg_remove(struct bcm_vk *vk);
502 void bcm_vk_drain_msg_on_reset(struct bcm_vk *vk);
503 int bcm_vk_sync_msgq(struct bcm_vk *vk, bool force_sync);
504 void bcm_vk_blk_drv_access(struct bcm_vk *vk);
505 s32 bcm_to_h_msg_dequeue(struct bcm_vk *vk);
506 int bcm_vk_send_shutdown_msg(struct bcm_vk *vk, u32 shut_type,
507 const pid_t pid, const u32 q_num);
508 void bcm_to_v_q_doorbell(struct bcm_vk *vk, u32 q_num, u32 db_val);
509 int bcm_vk_auto_load_all_images(struct bcm_vk *vk);
510 void bcm_vk_hb_init(struct bcm_vk *vk);
511 void bcm_vk_hb_deinit(struct bcm_vk *vk);
512 void bcm_vk_handle_notf(struct bcm_vk *vk);
513 bool bcm_vk_drv_access_ok(struct bcm_vk *vk);
514 void bcm_vk_set_host_alert(struct bcm_vk *vk, u32 bit_mask);
515
516 #ifdef CONFIG_BCM_VK_TTY
517 int bcm_vk_tty_init(struct bcm_vk *vk, char *name);
518 void bcm_vk_tty_exit(struct bcm_vk *vk);
519 void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk);
520 void bcm_vk_tty_wq_exit(struct bcm_vk *vk);
521
bcm_vk_tty_set_irq_enabled(struct bcm_vk * vk,int index)522 static inline void bcm_vk_tty_set_irq_enabled(struct bcm_vk *vk, int index)
523 {
524 vk->tty[index].irq_enabled = true;
525 }
526 #else
bcm_vk_tty_init(struct bcm_vk * vk,char * name)527 static inline int bcm_vk_tty_init(struct bcm_vk *vk, char *name)
528 {
529 return 0;
530 }
531
bcm_vk_tty_exit(struct bcm_vk * vk)532 static inline void bcm_vk_tty_exit(struct bcm_vk *vk)
533 {
534 }
535
bcm_vk_tty_terminate_tty_user(struct bcm_vk * vk)536 static inline void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk)
537 {
538 }
539
bcm_vk_tty_wq_exit(struct bcm_vk * vk)540 static inline void bcm_vk_tty_wq_exit(struct bcm_vk *vk)
541 {
542 }
543
bcm_vk_tty_set_irq_enabled(struct bcm_vk * vk,int index)544 static inline void bcm_vk_tty_set_irq_enabled(struct bcm_vk *vk, int index)
545 {
546 }
547 #endif /* CONFIG_BCM_VK_TTY */
548
549 #endif
550