1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
4 <http://rt2x00.serialmonkey.com>
5
6 */
7
8 /*
9 Module: rt2x00usb
10 Abstract: Data structures for the rt2x00usb module.
11 */
12
13 #ifndef RT2X00USB_H
14 #define RT2X00USB_H
15
16 #include <linux/usb.h>
17
18 #define to_usb_device_intf(d) \
19 ({ \
20 struct usb_interface *intf = to_usb_interface(d); \
21 interface_to_usbdev(intf); \
22 })
23
24 /*
25 * For USB vendor requests we need to pass a timeout time in ms, for this we
26 * use the REGISTER_TIMEOUT, however when loading firmware or read EEPROM
27 * a higher value is required. In that case we use the REGISTER_TIMEOUT_FIRMWARE
28 * and EEPROM_TIMEOUT.
29 */
30 #define REGISTER_TIMEOUT 100
31 #define REGISTER_TIMEOUT_FIRMWARE 1000
32 #define EEPROM_TIMEOUT 2000
33
34 /*
35 * Cache size
36 */
37 #define CSR_CACHE_SIZE 64
38
39 /*
40 * USB request types.
41 */
42 #define USB_VENDOR_REQUEST ( USB_TYPE_VENDOR | USB_RECIP_DEVICE )
43 #define USB_VENDOR_REQUEST_IN ( USB_DIR_IN | USB_VENDOR_REQUEST )
44 #define USB_VENDOR_REQUEST_OUT ( USB_DIR_OUT | USB_VENDOR_REQUEST )
45
46 /**
47 * enum rt2x00usb_vendor_request: USB vendor commands.
48 */
49 enum rt2x00usb_vendor_request {
50 USB_DEVICE_MODE = 1,
51 USB_SINGLE_WRITE = 2,
52 USB_SINGLE_READ = 3,
53 USB_MULTI_WRITE = 6,
54 USB_MULTI_READ = 7,
55 USB_EEPROM_WRITE = 8,
56 USB_EEPROM_READ = 9,
57 USB_LED_CONTROL = 10, /* RT73USB */
58 USB_RX_CONTROL = 12,
59 };
60
61 /**
62 * enum rt2x00usb_mode_offset: Device modes offset.
63 */
64 enum rt2x00usb_mode_offset {
65 USB_MODE_RESET = 1,
66 USB_MODE_UNPLUG = 2,
67 USB_MODE_FUNCTION = 3,
68 USB_MODE_TEST = 4,
69 USB_MODE_SLEEP = 7, /* RT73USB */
70 USB_MODE_FIRMWARE = 8, /* RT73USB */
71 USB_MODE_WAKEUP = 9, /* RT73USB */
72 USB_MODE_AUTORUN = 17, /* RT2800USB */
73 };
74
75 /**
76 * rt2x00usb_vendor_request - Send register command to device
77 * @rt2x00dev: Pointer to &struct rt2x00_dev
78 * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
79 * @requesttype: Request type &USB_VENDOR_REQUEST_*
80 * @offset: Register offset to perform action on
81 * @value: Value to write to device
82 * @buffer: Buffer where information will be read/written to by device
83 * @buffer_length: Size of &buffer
84 * @timeout: Operation timeout
85 *
86 * This is the main function to communicate with the device,
87 * the &buffer argument _must_ either be NULL or point to
88 * a buffer allocated by kmalloc. Failure to do so can lead
89 * to unexpected behavior depending on the architecture.
90 */
91 int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev,
92 const u8 request, const u8 requesttype,
93 const u16 offset, const u16 value,
94 void *buffer, const u16 buffer_length,
95 const int timeout);
96
97 /**
98 * rt2x00usb_vendor_request_buff - Send register command to device (buffered)
99 * @rt2x00dev: Pointer to &struct rt2x00_dev
100 * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
101 * @requesttype: Request type &USB_VENDOR_REQUEST_*
102 * @offset: Register offset to perform action on
103 * @buffer: Buffer where information will be read/written to by device
104 * @buffer_length: Size of &buffer
105 *
106 * This function will use a previously with kmalloc allocated cache
107 * to communicate with the device. The contents of the buffer pointer
108 * will be copied to this cache when writing, or read from the cache
109 * when reading.
110 * Buffers send to &rt2x00usb_vendor_request _must_ be allocated with
111 * kmalloc. Hence the reason for using a previously allocated cache
112 * which has been allocated properly.
113 */
114 int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
115 const u8 request, const u8 requesttype,
116 const u16 offset, void *buffer,
117 const u16 buffer_length);
118
119 /**
120 * rt2x00usb_vendor_request_buff - Send register command to device (buffered)
121 * @rt2x00dev: Pointer to &struct rt2x00_dev
122 * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
123 * @requesttype: Request type &USB_VENDOR_REQUEST_*
124 * @offset: Register offset to perform action on
125 * @buffer: Buffer where information will be read/written to by device
126 * @buffer_length: Size of &buffer
127 * @timeout: Operation timeout
128 *
129 * A version of &rt2x00usb_vendor_request_buff which must be called
130 * if the usb_cache_mutex is already held.
131 */
132 int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
133 const u8 request, const u8 requesttype,
134 const u16 offset, void *buffer,
135 const u16 buffer_length, const int timeout);
136
137 /**
138 * rt2x00usb_vendor_request_sw - Send single register command to device
139 * @rt2x00dev: Pointer to &struct rt2x00_dev
140 * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
141 * @offset: Register offset to perform action on
142 * @value: Value to write to device
143 * @timeout: Operation timeout
144 *
145 * Simple wrapper around rt2x00usb_vendor_request to write a single
146 * command to the device. Since we don't use the buffer argument we
147 * don't have to worry about kmalloc here.
148 */
rt2x00usb_vendor_request_sw(struct rt2x00_dev * rt2x00dev,const u8 request,const u16 offset,const u16 value,const int timeout)149 static inline int rt2x00usb_vendor_request_sw(struct rt2x00_dev *rt2x00dev,
150 const u8 request,
151 const u16 offset,
152 const u16 value,
153 const int timeout)
154 {
155 return rt2x00usb_vendor_request(rt2x00dev, request,
156 USB_VENDOR_REQUEST_OUT, offset,
157 value, NULL, 0, timeout);
158 }
159
160 /**
161 * rt2x00usb_eeprom_read - Read eeprom from device
162 * @rt2x00dev: Pointer to &struct rt2x00_dev
163 * @eeprom: Pointer to eeprom array to store the information in
164 * @length: Number of bytes to read from the eeprom
165 *
166 * Simple wrapper around rt2x00usb_vendor_request to read the eeprom
167 * from the device. Note that the eeprom argument _must_ be allocated using
168 * kmalloc for correct handling inside the kernel USB layer.
169 */
rt2x00usb_eeprom_read(struct rt2x00_dev * rt2x00dev,__le16 * eeprom,const u16 length)170 static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev,
171 __le16 *eeprom, const u16 length)
172 {
173 return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ,
174 USB_VENDOR_REQUEST_IN, 0, 0,
175 eeprom, length, EEPROM_TIMEOUT);
176 }
177
178 /**
179 * rt2x00usb_register_read - Read 32bit register word
180 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
181 * @offset: Register offset
182 *
183 * This function is a simple wrapper for 32bit register access
184 * through rt2x00usb_vendor_request_buff().
185 */
rt2x00usb_register_read(struct rt2x00_dev * rt2x00dev,const unsigned int offset)186 static inline u32 rt2x00usb_register_read(struct rt2x00_dev *rt2x00dev,
187 const unsigned int offset)
188 {
189 __le32 reg = 0;
190 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
191 USB_VENDOR_REQUEST_IN, offset,
192 ®, sizeof(reg));
193 return le32_to_cpu(reg);
194 }
195
196 /**
197 * rt2x00usb_register_read_lock - Read 32bit register word
198 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
199 * @offset: Register offset
200 *
201 * This function is a simple wrapper for 32bit register access
202 * through rt2x00usb_vendor_req_buff_lock().
203 */
rt2x00usb_register_read_lock(struct rt2x00_dev * rt2x00dev,const unsigned int offset)204 static inline u32 rt2x00usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
205 const unsigned int offset)
206 {
207 __le32 reg = 0;
208 rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
209 USB_VENDOR_REQUEST_IN, offset,
210 ®, sizeof(reg), REGISTER_TIMEOUT);
211 return le32_to_cpu(reg);
212 }
213
214 /**
215 * rt2x00usb_register_multiread - Read 32bit register words
216 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
217 * @offset: Register offset
218 * @value: Pointer to where register contents should be stored
219 * @length: Length of the data
220 *
221 * This function is a simple wrapper for 32bit register access
222 * through rt2x00usb_vendor_request_buff().
223 */
rt2x00usb_register_multiread(struct rt2x00_dev * rt2x00dev,const unsigned int offset,void * value,const u32 length)224 static inline void rt2x00usb_register_multiread(struct rt2x00_dev *rt2x00dev,
225 const unsigned int offset,
226 void *value, const u32 length)
227 {
228 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
229 USB_VENDOR_REQUEST_IN, offset,
230 value, length);
231 }
232
233 /**
234 * rt2x00usb_register_write - Write 32bit register word
235 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
236 * @offset: Register offset
237 * @value: Data which should be written
238 *
239 * This function is a simple wrapper for 32bit register access
240 * through rt2x00usb_vendor_request_buff().
241 */
rt2x00usb_register_write(struct rt2x00_dev * rt2x00dev,const unsigned int offset,u32 value)242 static inline void rt2x00usb_register_write(struct rt2x00_dev *rt2x00dev,
243 const unsigned int offset,
244 u32 value)
245 {
246 __le32 reg = cpu_to_le32(value);
247 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
248 USB_VENDOR_REQUEST_OUT, offset,
249 ®, sizeof(reg));
250 }
251
252 /**
253 * rt2x00usb_register_write_lock - Write 32bit register word
254 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
255 * @offset: Register offset
256 * @value: Data which should be written
257 *
258 * This function is a simple wrapper for 32bit register access
259 * through rt2x00usb_vendor_req_buff_lock().
260 */
rt2x00usb_register_write_lock(struct rt2x00_dev * rt2x00dev,const unsigned int offset,u32 value)261 static inline void rt2x00usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
262 const unsigned int offset,
263 u32 value)
264 {
265 __le32 reg = cpu_to_le32(value);
266 rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
267 USB_VENDOR_REQUEST_OUT, offset,
268 ®, sizeof(reg), REGISTER_TIMEOUT);
269 }
270
271 /**
272 * rt2x00usb_register_multiwrite - Write 32bit register words
273 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
274 * @offset: Register offset
275 * @value: Data which should be written
276 * @length: Length of the data
277 *
278 * This function is a simple wrapper for 32bit register access
279 * through rt2x00usb_vendor_request_buff().
280 */
rt2x00usb_register_multiwrite(struct rt2x00_dev * rt2x00dev,const unsigned int offset,const void * value,const u32 length)281 static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
282 const unsigned int offset,
283 const void *value,
284 const u32 length)
285 {
286 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
287 USB_VENDOR_REQUEST_OUT, offset,
288 (void *)value, length);
289 }
290
291 /**
292 * rt2x00usb_regbusy_read - Read from register with busy check
293 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
294 * @offset: Register offset
295 * @field: Field to check if register is busy
296 * @reg: Pointer to where register contents should be stored
297 *
298 * This function will read the given register, and checks if the
299 * register is busy. If it is, it will sleep for a couple of
300 * microseconds before reading the register again. If the register
301 * is not read after a certain timeout, this function will return
302 * FALSE.
303 */
304 int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
305 const unsigned int offset,
306 const struct rt2x00_field32 field,
307 u32 *reg);
308
309 /**
310 * rt2x00usb_register_read_async - Asynchronously read 32bit register word
311 * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
312 * @offset: Register offset
313 * @callback: Functon to call when read completes.
314 *
315 * Submit a control URB to read a 32bit register. This safe to
316 * be called from atomic context. The callback will be called
317 * when the URB completes. Otherwise the function is similar
318 * to rt2x00usb_register_read().
319 * When the callback function returns false, the memory will be cleaned up,
320 * when it returns true, the urb will be fired again.
321 */
322 void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev,
323 const unsigned int offset,
324 bool (*callback)(struct rt2x00_dev*, int, u32));
325
326 /*
327 * Radio handlers
328 */
329 void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev);
330
331 /**
332 * struct queue_entry_priv_usb: Per entry USB specific information
333 *
334 * @urb: Urb structure used for device communication.
335 */
336 struct queue_entry_priv_usb {
337 struct urb *urb;
338 };
339
340 /**
341 * struct queue_entry_priv_usb_bcn: Per TX entry USB specific information
342 *
343 * The first section should match &struct queue_entry_priv_usb exactly.
344 * rt2500usb can use this structure to send a guardian byte when working
345 * with beacons.
346 *
347 * @urb: Urb structure used for device communication.
348 * @guardian_data: Set to 0, used for sending the guardian data.
349 * @guardian_urb: Urb structure used to send the guardian data.
350 */
351 struct queue_entry_priv_usb_bcn {
352 struct urb *urb;
353
354 unsigned int guardian_data;
355 struct urb *guardian_urb;
356 };
357
358 /**
359 * rt2x00usb_kick_queue - Kick data queue
360 * @queue: Data queue to kick
361 *
362 * This will walk through all entries of the queue and push all pending
363 * frames to the hardware as a single burst.
364 */
365 void rt2x00usb_kick_queue(struct data_queue *queue);
366
367 /**
368 * rt2x00usb_flush_queue - Flush data queue
369 * @queue: Data queue to stop
370 * @drop: True to drop all pending frames.
371 *
372 * This will walk through all entries of the queue and will optionally
373 * kill all URB's which were send to the device, or at least wait until
374 * they have been returned from the device..
375 */
376 void rt2x00usb_flush_queue(struct data_queue *queue, bool drop);
377
378 /**
379 * rt2x00usb_watchdog - Watchdog for USB communication
380 * @rt2x00dev: Pointer to &struct rt2x00_dev
381 *
382 * Check the health of the USB communication and determine
383 * if timeouts have occurred. If this is the case, this function
384 * will reset all communication to restore functionality again.
385 */
386 void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev);
387
388 /*
389 * Device initialization handlers.
390 */
391 void rt2x00usb_clear_entry(struct queue_entry *entry);
392 int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev);
393 void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev);
394
395 /*
396 * USB driver handlers.
397 */
398 int rt2x00usb_probe(struct usb_interface *usb_intf,
399 const struct rt2x00_ops *ops);
400 void rt2x00usb_disconnect(struct usb_interface *usb_intf);
401 #ifdef CONFIG_PM
402 int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state);
403 int rt2x00usb_resume(struct usb_interface *usb_intf);
404 #else
405 #define rt2x00usb_suspend NULL
406 #define rt2x00usb_resume NULL
407 #endif /* CONFIG_PM */
408
409 #endif /* RT2X00USB_H */
410