1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * TI 3410/5052 USB Serial Driver
4 *
5 * Copyright (C) 2004 Texas Instruments
6 *
7 * This driver is based on the Linux io_ti driver, which is
8 * Copyright (C) 2000-2002 Inside Out Networks
9 * Copyright (C) 2001-2002 Greg Kroah-Hartman
10 *
11 * For questions or problems with this driver, contact Texas Instruments
12 * technical support, or Al Borchers <alborchers@steinerpoint.com>, or
13 * Peter Berger <pberger@brimson.com>.
14 */
15
16 #include <linux/kernel.h>
17 #include <linux/errno.h>
18 #include <linux/firmware.h>
19 #include <linux/slab.h>
20 #include <linux/tty.h>
21 #include <linux/tty_driver.h>
22 #include <linux/tty_flip.h>
23 #include <linux/module.h>
24 #include <linux/spinlock.h>
25 #include <linux/ioctl.h>
26 #include <linux/serial.h>
27 #include <linux/kfifo.h>
28 #include <linux/mutex.h>
29 #include <linux/uaccess.h>
30 #include <linux/usb.h>
31 #include <linux/usb/serial.h>
32
33 /* Configuration ids */
34 #define TI_BOOT_CONFIG 1
35 #define TI_ACTIVE_CONFIG 2
36
37 /* Vendor and product ids */
38 #define TI_VENDOR_ID 0x0451
39 #define IBM_VENDOR_ID 0x04b3
40 #define STARTECH_VENDOR_ID 0x14b0
41 #define TI_3410_PRODUCT_ID 0x3410
42 #define IBM_4543_PRODUCT_ID 0x4543
43 #define IBM_454B_PRODUCT_ID 0x454b
44 #define IBM_454C_PRODUCT_ID 0x454c
45 #define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */
46 #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */
47 #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */
48 #define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */
49 #define TI_5052_FIRMWARE_PRODUCT_ID 0x505F /* firmware is running */
50 #define FRI2_PRODUCT_ID 0x5053 /* Fish River Island II */
51
52 /* Multi-Tech vendor and product ids */
53 #define MTS_VENDOR_ID 0x06E0
54 #define MTS_GSM_NO_FW_PRODUCT_ID 0xF108
55 #define MTS_CDMA_NO_FW_PRODUCT_ID 0xF109
56 #define MTS_CDMA_PRODUCT_ID 0xF110
57 #define MTS_GSM_PRODUCT_ID 0xF111
58 #define MTS_EDGE_PRODUCT_ID 0xF112
59 #define MTS_MT9234MU_PRODUCT_ID 0xF114
60 #define MTS_MT9234ZBA_PRODUCT_ID 0xF115
61 #define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319
62
63 /* Abbott Diabetics vendor and product ids */
64 #define ABBOTT_VENDOR_ID 0x1a61
65 #define ABBOTT_STEREO_PLUG_ID 0x3410
66 #define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID
67 #define ABBOTT_STRIP_PORT_ID 0x3420
68
69 /* Honeywell vendor and product IDs */
70 #define HONEYWELL_VENDOR_ID 0x10ac
71 #define HONEYWELL_HGI80_PRODUCT_ID 0x0102 /* Honeywell HGI80 */
72
73 /* Moxa UPORT 11x0 vendor and product IDs */
74 #define MXU1_VENDOR_ID 0x110a
75 #define MXU1_1110_PRODUCT_ID 0x1110
76 #define MXU1_1130_PRODUCT_ID 0x1130
77 #define MXU1_1150_PRODUCT_ID 0x1150
78 #define MXU1_1151_PRODUCT_ID 0x1151
79 #define MXU1_1131_PRODUCT_ID 0x1131
80
81 /* Commands */
82 #define TI_GET_VERSION 0x01
83 #define TI_GET_PORT_STATUS 0x02
84 #define TI_GET_PORT_DEV_INFO 0x03
85 #define TI_GET_CONFIG 0x04
86 #define TI_SET_CONFIG 0x05
87 #define TI_OPEN_PORT 0x06
88 #define TI_CLOSE_PORT 0x07
89 #define TI_START_PORT 0x08
90 #define TI_STOP_PORT 0x09
91 #define TI_TEST_PORT 0x0A
92 #define TI_PURGE_PORT 0x0B
93 #define TI_RESET_EXT_DEVICE 0x0C
94 #define TI_WRITE_DATA 0x80
95 #define TI_READ_DATA 0x81
96 #define TI_REQ_TYPE_CLASS 0x82
97
98 /* Module identifiers */
99 #define TI_I2C_PORT 0x01
100 #define TI_IEEE1284_PORT 0x02
101 #define TI_UART1_PORT 0x03
102 #define TI_UART2_PORT 0x04
103 #define TI_RAM_PORT 0x05
104
105 /* Modem status */
106 #define TI_MSR_DELTA_CTS 0x01
107 #define TI_MSR_DELTA_DSR 0x02
108 #define TI_MSR_DELTA_RI 0x04
109 #define TI_MSR_DELTA_CD 0x08
110 #define TI_MSR_CTS 0x10
111 #define TI_MSR_DSR 0x20
112 #define TI_MSR_RI 0x40
113 #define TI_MSR_CD 0x80
114 #define TI_MSR_DELTA_MASK 0x0F
115 #define TI_MSR_MASK 0xF0
116
117 /* Line status */
118 #define TI_LSR_OVERRUN_ERROR 0x01
119 #define TI_LSR_PARITY_ERROR 0x02
120 #define TI_LSR_FRAMING_ERROR 0x04
121 #define TI_LSR_BREAK 0x08
122 #define TI_LSR_ERROR 0x0F
123 #define TI_LSR_RX_FULL 0x10
124 #define TI_LSR_TX_EMPTY 0x20
125 #define TI_LSR_TX_EMPTY_BOTH 0x40
126
127 /* Line control */
128 #define TI_LCR_BREAK 0x40
129
130 /* Modem control */
131 #define TI_MCR_LOOP 0x04
132 #define TI_MCR_DTR 0x10
133 #define TI_MCR_RTS 0x20
134
135 /* Mask settings */
136 #define TI_UART_ENABLE_RTS_IN 0x0001
137 #define TI_UART_DISABLE_RTS 0x0002
138 #define TI_UART_ENABLE_PARITY_CHECKING 0x0008
139 #define TI_UART_ENABLE_DSR_OUT 0x0010
140 #define TI_UART_ENABLE_CTS_OUT 0x0020
141 #define TI_UART_ENABLE_X_OUT 0x0040
142 #define TI_UART_ENABLE_XA_OUT 0x0080
143 #define TI_UART_ENABLE_X_IN 0x0100
144 #define TI_UART_ENABLE_DTR_IN 0x0800
145 #define TI_UART_DISABLE_DTR 0x1000
146 #define TI_UART_ENABLE_MS_INTS 0x2000
147 #define TI_UART_ENABLE_AUTO_START_DMA 0x4000
148
149 /* Parity */
150 #define TI_UART_NO_PARITY 0x00
151 #define TI_UART_ODD_PARITY 0x01
152 #define TI_UART_EVEN_PARITY 0x02
153 #define TI_UART_MARK_PARITY 0x03
154 #define TI_UART_SPACE_PARITY 0x04
155
156 /* Stop bits */
157 #define TI_UART_1_STOP_BITS 0x00
158 #define TI_UART_1_5_STOP_BITS 0x01
159 #define TI_UART_2_STOP_BITS 0x02
160
161 /* Bits per character */
162 #define TI_UART_5_DATA_BITS 0x00
163 #define TI_UART_6_DATA_BITS 0x01
164 #define TI_UART_7_DATA_BITS 0x02
165 #define TI_UART_8_DATA_BITS 0x03
166
167 /* 232/485 modes */
168 #define TI_UART_232 0x00
169 #define TI_UART_485_RECEIVER_DISABLED 0x01
170 #define TI_UART_485_RECEIVER_ENABLED 0x02
171
172 /* Pipe transfer mode and timeout */
173 #define TI_PIPE_MODE_CONTINUOUS 0x01
174 #define TI_PIPE_MODE_MASK 0x03
175 #define TI_PIPE_TIMEOUT_MASK 0x7C
176 #define TI_PIPE_TIMEOUT_ENABLE 0x80
177
178 /* Config struct */
179 struct ti_uart_config {
180 __be16 wBaudRate;
181 __be16 wFlags;
182 u8 bDataBits;
183 u8 bParity;
184 u8 bStopBits;
185 char cXon;
186 char cXoff;
187 u8 bUartMode;
188 };
189
190 /* Get port status */
191 struct ti_port_status {
192 u8 bCmdCode;
193 u8 bModuleId;
194 u8 bErrorCode;
195 u8 bMSR;
196 u8 bLSR;
197 };
198
199 /* Purge modes */
200 #define TI_PURGE_OUTPUT 0x00
201 #define TI_PURGE_INPUT 0x80
202
203 /* Read/Write data */
204 #define TI_RW_DATA_ADDR_SFR 0x10
205 #define TI_RW_DATA_ADDR_IDATA 0x20
206 #define TI_RW_DATA_ADDR_XDATA 0x30
207 #define TI_RW_DATA_ADDR_CODE 0x40
208 #define TI_RW_DATA_ADDR_GPIO 0x50
209 #define TI_RW_DATA_ADDR_I2C 0x60
210 #define TI_RW_DATA_ADDR_FLASH 0x70
211 #define TI_RW_DATA_ADDR_DSP 0x80
212
213 #define TI_RW_DATA_UNSPECIFIED 0x00
214 #define TI_RW_DATA_BYTE 0x01
215 #define TI_RW_DATA_WORD 0x02
216 #define TI_RW_DATA_DOUBLE_WORD 0x04
217
218 struct ti_write_data_bytes {
219 u8 bAddrType;
220 u8 bDataType;
221 u8 bDataCounter;
222 __be16 wBaseAddrHi;
223 __be16 wBaseAddrLo;
224 u8 bData[];
225 } __packed;
226
227 struct ti_read_data_request {
228 u8 bAddrType;
229 u8 bDataType;
230 u8 bDataCounter;
231 __be16 wBaseAddrHi;
232 __be16 wBaseAddrLo;
233 } __packed;
234
235 struct ti_read_data_bytes {
236 u8 bCmdCode;
237 u8 bModuleId;
238 u8 bErrorCode;
239 u8 bData[];
240 };
241
242 /* Interrupt struct */
243 struct ti_interrupt {
244 u8 bICode;
245 u8 bIInfo;
246 };
247
248 /* Interrupt codes */
249 #define TI_CODE_HARDWARE_ERROR 0xFF
250 #define TI_CODE_DATA_ERROR 0x03
251 #define TI_CODE_MODEM_STATUS 0x04
252
253 /* Download firmware max packet size */
254 #define TI_DOWNLOAD_MAX_PACKET_SIZE 64
255
256 /* Firmware image header */
257 struct ti_firmware_header {
258 __le16 wLength;
259 u8 bCheckSum;
260 } __packed;
261
262 /* UART addresses */
263 #define TI_UART1_BASE_ADDR 0xFFA0 /* UART 1 base address */
264 #define TI_UART2_BASE_ADDR 0xFFB0 /* UART 2 base address */
265 #define TI_UART_OFFSET_LCR 0x0002 /* UART MCR register offset */
266 #define TI_UART_OFFSET_MCR 0x0004 /* UART MCR register offset */
267
268 #define TI_DRIVER_AUTHOR "Al Borchers <alborchers@steinerpoint.com>"
269 #define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver"
270
271 #define TI_FIRMWARE_BUF_SIZE 16284
272
273 #define TI_TRANSFER_TIMEOUT 2
274
275 /* read urb states */
276 #define TI_READ_URB_RUNNING 0
277 #define TI_READ_URB_STOPPING 1
278 #define TI_READ_URB_STOPPED 2
279
280 #define TI_EXTRA_VID_PID_COUNT 5
281
282 struct ti_port {
283 int tp_is_open;
284 u8 tp_msr;
285 u8 tp_shadow_mcr;
286 u8 tp_uart_mode; /* 232 or 485 modes */
287 unsigned int tp_uart_base_addr;
288 struct ti_device *tp_tdev;
289 struct usb_serial_port *tp_port;
290 spinlock_t tp_lock;
291 int tp_read_urb_state;
292 int tp_write_urb_in_use;
293 };
294
295 struct ti_device {
296 struct mutex td_open_close_lock;
297 int td_open_port_count;
298 struct usb_serial *td_serial;
299 int td_is_3410;
300 bool td_rs485_only;
301 };
302
303 static int ti_startup(struct usb_serial *serial);
304 static void ti_release(struct usb_serial *serial);
305 static int ti_port_probe(struct usb_serial_port *port);
306 static void ti_port_remove(struct usb_serial_port *port);
307 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
308 static void ti_close(struct usb_serial_port *port);
309 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
310 const unsigned char *data, int count);
311 static unsigned int ti_write_room(struct tty_struct *tty);
312 static unsigned int ti_chars_in_buffer(struct tty_struct *tty);
313 static bool ti_tx_empty(struct usb_serial_port *port);
314 static void ti_throttle(struct tty_struct *tty);
315 static void ti_unthrottle(struct tty_struct *tty);
316 static void ti_set_termios(struct tty_struct *tty,
317 struct usb_serial_port *port,
318 const struct ktermios *old_termios);
319 static int ti_tiocmget(struct tty_struct *tty);
320 static int ti_tiocmset(struct tty_struct *tty,
321 unsigned int set, unsigned int clear);
322 static int ti_break(struct tty_struct *tty, int break_state);
323 static void ti_interrupt_callback(struct urb *urb);
324 static void ti_bulk_in_callback(struct urb *urb);
325 static void ti_bulk_out_callback(struct urb *urb);
326
327 static void ti_recv(struct usb_serial_port *port, unsigned char *data,
328 int length);
329 static void ti_send(struct ti_port *tport);
330 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
331 static int ti_get_lsr(struct ti_port *tport, u8 *lsr);
332 static void ti_get_serial_info(struct tty_struct *tty, struct serial_struct *ss);
333 static void ti_handle_new_msr(struct ti_port *tport, u8 msr);
334
335 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty);
336 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty);
337
338 static int ti_command_out_sync(struct usb_device *udev, u8 command,
339 u16 moduleid, u16 value, void *data, int size);
340 static int ti_command_in_sync(struct usb_device *udev, u8 command,
341 u16 moduleid, u16 value, void *data, int size);
342 static int ti_port_cmd_out(struct usb_serial_port *port, u8 command,
343 u16 value, void *data, int size);
344 static int ti_port_cmd_in(struct usb_serial_port *port, u8 command,
345 u16 value, void *data, int size);
346
347 static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev,
348 unsigned long addr, u8 mask, u8 byte);
349
350 static int ti_download_firmware(struct ti_device *tdev);
351
352 static const struct usb_device_id ti_id_table_3410[] = {
353 { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
354 { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
355 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
356 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
357 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
358 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
359 { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
360 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
361 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
362 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
363 { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
364 { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
365 { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
366 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) },
367 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
368 { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
369 { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
370 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
371 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
372 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
373 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
374 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
375 { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
376 { } /* terminator */
377 };
378
379 static const struct usb_device_id ti_id_table_5052[] = {
380 { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
381 { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
382 { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
383 { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
384 { }
385 };
386
387 static const struct usb_device_id ti_id_table_combined[] = {
388 { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
389 { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
390 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
391 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
392 { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
393 { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
394 { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
395 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
396 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
397 { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
398 { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
399 { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
400 { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
401 { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
402 { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
403 { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
404 { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
405 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
406 { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) },
407 { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) },
408 { USB_DEVICE(HONEYWELL_VENDOR_ID, HONEYWELL_HGI80_PRODUCT_ID) },
409 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
410 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
411 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
412 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
413 { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
414 { USB_DEVICE(STARTECH_VENDOR_ID, TI_3410_PRODUCT_ID) },
415 { } /* terminator */
416 };
417
418 static struct usb_serial_driver ti_1port_device = {
419 .driver = {
420 .name = "ti_usb_3410_5052_1",
421 },
422 .description = "TI USB 3410 1 port adapter",
423 .id_table = ti_id_table_3410,
424 .num_ports = 1,
425 .num_bulk_out = 1,
426 .attach = ti_startup,
427 .release = ti_release,
428 .port_probe = ti_port_probe,
429 .port_remove = ti_port_remove,
430 .open = ti_open,
431 .close = ti_close,
432 .write = ti_write,
433 .write_room = ti_write_room,
434 .chars_in_buffer = ti_chars_in_buffer,
435 .tx_empty = ti_tx_empty,
436 .throttle = ti_throttle,
437 .unthrottle = ti_unthrottle,
438 .get_serial = ti_get_serial_info,
439 .set_termios = ti_set_termios,
440 .tiocmget = ti_tiocmget,
441 .tiocmset = ti_tiocmset,
442 .tiocmiwait = usb_serial_generic_tiocmiwait,
443 .get_icount = usb_serial_generic_get_icount,
444 .break_ctl = ti_break,
445 .read_int_callback = ti_interrupt_callback,
446 .read_bulk_callback = ti_bulk_in_callback,
447 .write_bulk_callback = ti_bulk_out_callback,
448 };
449
450 static struct usb_serial_driver ti_2port_device = {
451 .driver = {
452 .name = "ti_usb_3410_5052_2",
453 },
454 .description = "TI USB 5052 2 port adapter",
455 .id_table = ti_id_table_5052,
456 .num_ports = 2,
457 .num_bulk_out = 1,
458 .attach = ti_startup,
459 .release = ti_release,
460 .port_probe = ti_port_probe,
461 .port_remove = ti_port_remove,
462 .open = ti_open,
463 .close = ti_close,
464 .write = ti_write,
465 .write_room = ti_write_room,
466 .chars_in_buffer = ti_chars_in_buffer,
467 .tx_empty = ti_tx_empty,
468 .throttle = ti_throttle,
469 .unthrottle = ti_unthrottle,
470 .get_serial = ti_get_serial_info,
471 .set_termios = ti_set_termios,
472 .tiocmget = ti_tiocmget,
473 .tiocmset = ti_tiocmset,
474 .tiocmiwait = usb_serial_generic_tiocmiwait,
475 .get_icount = usb_serial_generic_get_icount,
476 .break_ctl = ti_break,
477 .read_int_callback = ti_interrupt_callback,
478 .read_bulk_callback = ti_bulk_in_callback,
479 .write_bulk_callback = ti_bulk_out_callback,
480 };
481
482 static struct usb_serial_driver * const serial_drivers[] = {
483 &ti_1port_device, &ti_2port_device, NULL
484 };
485
486 MODULE_AUTHOR(TI_DRIVER_AUTHOR);
487 MODULE_DESCRIPTION(TI_DRIVER_DESC);
488 MODULE_LICENSE("GPL");
489
490 MODULE_FIRMWARE("ti_3410.fw");
491 MODULE_FIRMWARE("ti_5052.fw");
492 MODULE_FIRMWARE("mts_cdma.fw");
493 MODULE_FIRMWARE("mts_gsm.fw");
494 MODULE_FIRMWARE("mts_edge.fw");
495 MODULE_FIRMWARE("mts_mt9234mu.fw");
496 MODULE_FIRMWARE("mts_mt9234zba.fw");
497 MODULE_FIRMWARE("moxa/moxa-1110.fw");
498 MODULE_FIRMWARE("moxa/moxa-1130.fw");
499 MODULE_FIRMWARE("moxa/moxa-1131.fw");
500 MODULE_FIRMWARE("moxa/moxa-1150.fw");
501 MODULE_FIRMWARE("moxa/moxa-1151.fw");
502
503 MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
504
505 module_usb_serial_driver(serial_drivers, ti_id_table_combined);
506
ti_startup(struct usb_serial * serial)507 static int ti_startup(struct usb_serial *serial)
508 {
509 struct ti_device *tdev;
510 struct usb_device *dev = serial->dev;
511 struct usb_host_interface *cur_altsetting;
512 int num_endpoints;
513 u16 vid, pid;
514 int status;
515
516 dev_dbg(&dev->dev,
517 "%s - product 0x%4X, num configurations %d, configuration value %d\n",
518 __func__, le16_to_cpu(dev->descriptor.idProduct),
519 dev->descriptor.bNumConfigurations,
520 dev->actconfig->desc.bConfigurationValue);
521
522 tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
523 if (!tdev)
524 return -ENOMEM;
525
526 mutex_init(&tdev->td_open_close_lock);
527 tdev->td_serial = serial;
528 usb_set_serial_data(serial, tdev);
529
530 /* determine device type */
531 if (serial->type == &ti_1port_device)
532 tdev->td_is_3410 = 1;
533 dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
534 tdev->td_is_3410 ? "3410" : "5052");
535
536 vid = le16_to_cpu(dev->descriptor.idVendor);
537 pid = le16_to_cpu(dev->descriptor.idProduct);
538 if (vid == MXU1_VENDOR_ID) {
539 switch (pid) {
540 case MXU1_1130_PRODUCT_ID:
541 case MXU1_1131_PRODUCT_ID:
542 tdev->td_rs485_only = true;
543 break;
544 }
545 }
546
547 cur_altsetting = serial->interface->cur_altsetting;
548 num_endpoints = cur_altsetting->desc.bNumEndpoints;
549
550 /* if we have only 1 configuration and 1 endpoint, download firmware */
551 if (dev->descriptor.bNumConfigurations == 1 && num_endpoints == 1) {
552 status = ti_download_firmware(tdev);
553
554 if (status != 0)
555 goto free_tdev;
556
557 /* 3410 must be reset, 5052 resets itself */
558 if (tdev->td_is_3410) {
559 msleep_interruptible(100);
560 usb_reset_device(dev);
561 }
562
563 status = -ENODEV;
564 goto free_tdev;
565 }
566
567 /* the second configuration must be set */
568 if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
569 status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
570 status = status ? status : -ENODEV;
571 goto free_tdev;
572 }
573
574 if (serial->num_bulk_in < serial->num_ports ||
575 serial->num_bulk_out < serial->num_ports) {
576 dev_err(&serial->interface->dev, "missing endpoints\n");
577 status = -ENODEV;
578 goto free_tdev;
579 }
580
581 return 0;
582
583 free_tdev:
584 kfree(tdev);
585 usb_set_serial_data(serial, NULL);
586 return status;
587 }
588
589
ti_release(struct usb_serial * serial)590 static void ti_release(struct usb_serial *serial)
591 {
592 struct ti_device *tdev = usb_get_serial_data(serial);
593
594 kfree(tdev);
595 }
596
ti_port_probe(struct usb_serial_port * port)597 static int ti_port_probe(struct usb_serial_port *port)
598 {
599 struct ti_port *tport;
600
601 tport = kzalloc(sizeof(*tport), GFP_KERNEL);
602 if (!tport)
603 return -ENOMEM;
604
605 spin_lock_init(&tport->tp_lock);
606 if (port == port->serial->port[0])
607 tport->tp_uart_base_addr = TI_UART1_BASE_ADDR;
608 else
609 tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
610 tport->tp_port = port;
611 tport->tp_tdev = usb_get_serial_data(port->serial);
612
613 if (tport->tp_tdev->td_rs485_only)
614 tport->tp_uart_mode = TI_UART_485_RECEIVER_DISABLED;
615 else
616 tport->tp_uart_mode = TI_UART_232;
617
618 usb_set_serial_port_data(port, tport);
619
620 /*
621 * The TUSB5052 LSR does not tell when the transmitter shift register
622 * has emptied so add a one-character drain delay.
623 */
624 if (!tport->tp_tdev->td_is_3410)
625 port->port.drain_delay = 1;
626
627 return 0;
628 }
629
ti_port_remove(struct usb_serial_port * port)630 static void ti_port_remove(struct usb_serial_port *port)
631 {
632 struct ti_port *tport;
633
634 tport = usb_get_serial_port_data(port);
635 kfree(tport);
636 }
637
ti_open(struct tty_struct * tty,struct usb_serial_port * port)638 static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
639 {
640 struct ti_port *tport = usb_get_serial_port_data(port);
641 struct ti_device *tdev;
642 struct usb_device *dev;
643 struct urb *urb;
644 int status;
645 u16 open_settings;
646
647 open_settings = (TI_PIPE_MODE_CONTINUOUS |
648 TI_PIPE_TIMEOUT_ENABLE |
649 (TI_TRANSFER_TIMEOUT << 2));
650
651 dev = port->serial->dev;
652 tdev = tport->tp_tdev;
653
654 /* only one open on any port on a device at a time */
655 if (mutex_lock_interruptible(&tdev->td_open_close_lock))
656 return -ERESTARTSYS;
657
658 tport->tp_msr = 0;
659 tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR);
660
661 /* start interrupt urb the first time a port is opened on this device */
662 if (tdev->td_open_port_count == 0) {
663 dev_dbg(&port->dev, "%s - start interrupt in urb\n", __func__);
664 urb = tdev->td_serial->port[0]->interrupt_in_urb;
665 if (!urb) {
666 dev_err(&port->dev, "%s - no interrupt urb\n", __func__);
667 status = -EINVAL;
668 goto release_lock;
669 }
670 urb->context = tdev;
671 status = usb_submit_urb(urb, GFP_KERNEL);
672 if (status) {
673 dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status);
674 goto release_lock;
675 }
676 }
677
678 if (tty)
679 ti_set_termios(tty, port, &tty->termios);
680
681 status = ti_port_cmd_out(port, TI_OPEN_PORT, open_settings, NULL, 0);
682 if (status) {
683 dev_err(&port->dev, "%s - cannot send open command, %d\n",
684 __func__, status);
685 goto unlink_int_urb;
686 }
687
688 status = ti_port_cmd_out(port, TI_START_PORT, 0, NULL, 0);
689 if (status) {
690 dev_err(&port->dev, "%s - cannot send start command, %d\n",
691 __func__, status);
692 goto unlink_int_urb;
693 }
694
695 status = ti_port_cmd_out(port, TI_PURGE_PORT, TI_PURGE_INPUT, NULL, 0);
696 if (status) {
697 dev_err(&port->dev, "%s - cannot clear input buffers, %d\n",
698 __func__, status);
699 goto unlink_int_urb;
700 }
701 status = ti_port_cmd_out(port, TI_PURGE_PORT, TI_PURGE_OUTPUT, NULL, 0);
702 if (status) {
703 dev_err(&port->dev, "%s - cannot clear output buffers, %d\n",
704 __func__, status);
705 goto unlink_int_urb;
706 }
707
708 /* reset the data toggle on the bulk endpoints to work around bug in
709 * host controllers where things get out of sync some times */
710 usb_clear_halt(dev, port->write_urb->pipe);
711 usb_clear_halt(dev, port->read_urb->pipe);
712
713 if (tty)
714 ti_set_termios(tty, port, &tty->termios);
715
716 status = ti_port_cmd_out(port, TI_OPEN_PORT, open_settings, NULL, 0);
717 if (status) {
718 dev_err(&port->dev, "%s - cannot send open command (2), %d\n",
719 __func__, status);
720 goto unlink_int_urb;
721 }
722
723 status = ti_port_cmd_out(port, TI_START_PORT, 0, NULL, 0);
724 if (status) {
725 dev_err(&port->dev, "%s - cannot send start command (2), %d\n",
726 __func__, status);
727 goto unlink_int_urb;
728 }
729
730 /* start read urb */
731 urb = port->read_urb;
732 if (!urb) {
733 dev_err(&port->dev, "%s - no read urb\n", __func__);
734 status = -EINVAL;
735 goto unlink_int_urb;
736 }
737 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
738 urb->context = tport;
739 status = usb_submit_urb(urb, GFP_KERNEL);
740 if (status) {
741 dev_err(&port->dev, "%s - submit read urb failed, %d\n",
742 __func__, status);
743 goto unlink_int_urb;
744 }
745
746 tport->tp_is_open = 1;
747 ++tdev->td_open_port_count;
748
749 goto release_lock;
750
751 unlink_int_urb:
752 if (tdev->td_open_port_count == 0)
753 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
754 release_lock:
755 mutex_unlock(&tdev->td_open_close_lock);
756 return status;
757 }
758
759
ti_close(struct usb_serial_port * port)760 static void ti_close(struct usb_serial_port *port)
761 {
762 struct ti_device *tdev;
763 struct ti_port *tport;
764 int status;
765 unsigned long flags;
766
767 tdev = usb_get_serial_data(port->serial);
768 tport = usb_get_serial_port_data(port);
769
770 tport->tp_is_open = 0;
771
772 usb_kill_urb(port->read_urb);
773 usb_kill_urb(port->write_urb);
774 tport->tp_write_urb_in_use = 0;
775 spin_lock_irqsave(&tport->tp_lock, flags);
776 kfifo_reset_out(&port->write_fifo);
777 spin_unlock_irqrestore(&tport->tp_lock, flags);
778
779 status = ti_port_cmd_out(port, TI_CLOSE_PORT, 0, NULL, 0);
780 if (status)
781 dev_err(&port->dev,
782 "%s - cannot send close port command, %d\n"
783 , __func__, status);
784
785 mutex_lock(&tdev->td_open_close_lock);
786 --tdev->td_open_port_count;
787 if (tdev->td_open_port_count == 0) {
788 /* last port is closed, shut down interrupt urb */
789 usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
790 }
791 mutex_unlock(&tdev->td_open_close_lock);
792 }
793
794
ti_write(struct tty_struct * tty,struct usb_serial_port * port,const unsigned char * data,int count)795 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
796 const unsigned char *data, int count)
797 {
798 struct ti_port *tport = usb_get_serial_port_data(port);
799
800 if (count == 0) {
801 return 0;
802 }
803
804 if (!tport->tp_is_open)
805 return -ENODEV;
806
807 count = kfifo_in_locked(&port->write_fifo, data, count,
808 &tport->tp_lock);
809 ti_send(tport);
810
811 return count;
812 }
813
814
ti_write_room(struct tty_struct * tty)815 static unsigned int ti_write_room(struct tty_struct *tty)
816 {
817 struct usb_serial_port *port = tty->driver_data;
818 struct ti_port *tport = usb_get_serial_port_data(port);
819 unsigned int room;
820 unsigned long flags;
821
822 spin_lock_irqsave(&tport->tp_lock, flags);
823 room = kfifo_avail(&port->write_fifo);
824 spin_unlock_irqrestore(&tport->tp_lock, flags);
825
826 dev_dbg(&port->dev, "%s - returns %u\n", __func__, room);
827 return room;
828 }
829
830
ti_chars_in_buffer(struct tty_struct * tty)831 static unsigned int ti_chars_in_buffer(struct tty_struct *tty)
832 {
833 struct usb_serial_port *port = tty->driver_data;
834 struct ti_port *tport = usb_get_serial_port_data(port);
835 unsigned int chars;
836 unsigned long flags;
837
838 spin_lock_irqsave(&tport->tp_lock, flags);
839 chars = kfifo_len(&port->write_fifo);
840 spin_unlock_irqrestore(&tport->tp_lock, flags);
841
842 dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);
843 return chars;
844 }
845
ti_tx_empty(struct usb_serial_port * port)846 static bool ti_tx_empty(struct usb_serial_port *port)
847 {
848 struct ti_port *tport = usb_get_serial_port_data(port);
849 u8 lsr, mask;
850 int ret;
851
852 /*
853 * TUSB5052 does not have the TEMT bit to tell if the shift register
854 * is empty.
855 */
856 if (tport->tp_tdev->td_is_3410)
857 mask = TI_LSR_TX_EMPTY_BOTH;
858 else
859 mask = TI_LSR_TX_EMPTY;
860
861 ret = ti_get_lsr(tport, &lsr);
862 if (!ret && !(lsr & mask))
863 return false;
864
865 return true;
866 }
867
ti_throttle(struct tty_struct * tty)868 static void ti_throttle(struct tty_struct *tty)
869 {
870 struct usb_serial_port *port = tty->driver_data;
871 struct ti_port *tport = usb_get_serial_port_data(port);
872
873 if (I_IXOFF(tty) || C_CRTSCTS(tty))
874 ti_stop_read(tport, tty);
875
876 }
877
878
ti_unthrottle(struct tty_struct * tty)879 static void ti_unthrottle(struct tty_struct *tty)
880 {
881 struct usb_serial_port *port = tty->driver_data;
882 struct ti_port *tport = usb_get_serial_port_data(port);
883 int status;
884
885 if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
886 status = ti_restart_read(tport, tty);
887 if (status)
888 dev_err(&port->dev, "%s - cannot restart read, %d\n",
889 __func__, status);
890 }
891 }
892
ti_set_termios(struct tty_struct * tty,struct usb_serial_port * port,const struct ktermios * old_termios)893 static void ti_set_termios(struct tty_struct *tty,
894 struct usb_serial_port *port,
895 const struct ktermios *old_termios)
896 {
897 struct ti_port *tport = usb_get_serial_port_data(port);
898 struct ti_uart_config *config;
899 int baud;
900 int status;
901 unsigned int mcr;
902 u16 wbaudrate;
903 u16 wflags = 0;
904
905 config = kmalloc(sizeof(*config), GFP_KERNEL);
906 if (!config)
907 return;
908
909 /* these flags must be set */
910 wflags |= TI_UART_ENABLE_MS_INTS;
911 wflags |= TI_UART_ENABLE_AUTO_START_DMA;
912 config->bUartMode = tport->tp_uart_mode;
913
914 switch (C_CSIZE(tty)) {
915 case CS5:
916 config->bDataBits = TI_UART_5_DATA_BITS;
917 break;
918 case CS6:
919 config->bDataBits = TI_UART_6_DATA_BITS;
920 break;
921 case CS7:
922 config->bDataBits = TI_UART_7_DATA_BITS;
923 break;
924 default:
925 case CS8:
926 config->bDataBits = TI_UART_8_DATA_BITS;
927 break;
928 }
929
930 /* CMSPAR isn't supported by this driver */
931 tty->termios.c_cflag &= ~CMSPAR;
932
933 if (C_PARENB(tty)) {
934 if (C_PARODD(tty)) {
935 wflags |= TI_UART_ENABLE_PARITY_CHECKING;
936 config->bParity = TI_UART_ODD_PARITY;
937 } else {
938 wflags |= TI_UART_ENABLE_PARITY_CHECKING;
939 config->bParity = TI_UART_EVEN_PARITY;
940 }
941 } else {
942 wflags &= ~TI_UART_ENABLE_PARITY_CHECKING;
943 config->bParity = TI_UART_NO_PARITY;
944 }
945
946 if (C_CSTOPB(tty))
947 config->bStopBits = TI_UART_2_STOP_BITS;
948 else
949 config->bStopBits = TI_UART_1_STOP_BITS;
950
951 if (C_CRTSCTS(tty)) {
952 /* RTS flow control must be off to drop RTS for baud rate B0 */
953 if ((C_BAUD(tty)) != B0)
954 wflags |= TI_UART_ENABLE_RTS_IN;
955 wflags |= TI_UART_ENABLE_CTS_OUT;
956 } else {
957 ti_restart_read(tport, tty);
958 }
959
960 if (I_IXOFF(tty) || I_IXON(tty)) {
961 config->cXon = START_CHAR(tty);
962 config->cXoff = STOP_CHAR(tty);
963
964 if (I_IXOFF(tty))
965 wflags |= TI_UART_ENABLE_X_IN;
966 else
967 ti_restart_read(tport, tty);
968
969 if (I_IXON(tty))
970 wflags |= TI_UART_ENABLE_X_OUT;
971 }
972
973 baud = tty_get_baud_rate(tty);
974 if (!baud)
975 baud = 9600;
976 if (tport->tp_tdev->td_is_3410)
977 wbaudrate = (923077 + baud/2) / baud;
978 else
979 wbaudrate = (461538 + baud/2) / baud;
980
981 /* FIXME: Should calculate resulting baud here and report it back */
982 if ((C_BAUD(tty)) != B0)
983 tty_encode_baud_rate(tty, baud, baud);
984
985 dev_dbg(&port->dev,
986 "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
987 __func__, baud, wbaudrate, wflags,
988 config->bDataBits, config->bParity, config->bStopBits,
989 config->cXon, config->cXoff, config->bUartMode);
990
991 config->wBaudRate = cpu_to_be16(wbaudrate);
992 config->wFlags = cpu_to_be16(wflags);
993
994 status = ti_port_cmd_out(port, TI_SET_CONFIG, 0, config,
995 sizeof(*config));
996 if (status)
997 dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
998 __func__, port->port_number, status);
999
1000 /* SET_CONFIG asserts RTS and DTR, reset them correctly */
1001 mcr = tport->tp_shadow_mcr;
1002 /* if baud rate is B0, clear RTS and DTR */
1003 if (C_BAUD(tty) == B0)
1004 mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
1005 status = ti_set_mcr(tport, mcr);
1006 if (status)
1007 dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n",
1008 __func__, port->port_number, status);
1009
1010 kfree(config);
1011 }
1012
1013
ti_tiocmget(struct tty_struct * tty)1014 static int ti_tiocmget(struct tty_struct *tty)
1015 {
1016 struct usb_serial_port *port = tty->driver_data;
1017 struct ti_port *tport = usb_get_serial_port_data(port);
1018 unsigned int result;
1019 unsigned int msr;
1020 unsigned int mcr;
1021 unsigned long flags;
1022
1023 spin_lock_irqsave(&tport->tp_lock, flags);
1024 msr = tport->tp_msr;
1025 mcr = tport->tp_shadow_mcr;
1026 spin_unlock_irqrestore(&tport->tp_lock, flags);
1027
1028 result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0)
1029 | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0)
1030 | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0)
1031 | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0)
1032 | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0)
1033 | ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
1034 | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
1035
1036 dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
1037
1038 return result;
1039 }
1040
1041
ti_tiocmset(struct tty_struct * tty,unsigned int set,unsigned int clear)1042 static int ti_tiocmset(struct tty_struct *tty,
1043 unsigned int set, unsigned int clear)
1044 {
1045 struct usb_serial_port *port = tty->driver_data;
1046 struct ti_port *tport = usb_get_serial_port_data(port);
1047 unsigned int mcr;
1048 unsigned long flags;
1049
1050 spin_lock_irqsave(&tport->tp_lock, flags);
1051 mcr = tport->tp_shadow_mcr;
1052
1053 if (set & TIOCM_RTS)
1054 mcr |= TI_MCR_RTS;
1055 if (set & TIOCM_DTR)
1056 mcr |= TI_MCR_DTR;
1057 if (set & TIOCM_LOOP)
1058 mcr |= TI_MCR_LOOP;
1059
1060 if (clear & TIOCM_RTS)
1061 mcr &= ~TI_MCR_RTS;
1062 if (clear & TIOCM_DTR)
1063 mcr &= ~TI_MCR_DTR;
1064 if (clear & TIOCM_LOOP)
1065 mcr &= ~TI_MCR_LOOP;
1066 spin_unlock_irqrestore(&tport->tp_lock, flags);
1067
1068 return ti_set_mcr(tport, mcr);
1069 }
1070
1071
ti_break(struct tty_struct * tty,int break_state)1072 static int ti_break(struct tty_struct *tty, int break_state)
1073 {
1074 struct usb_serial_port *port = tty->driver_data;
1075 struct ti_port *tport = usb_get_serial_port_data(port);
1076 int status;
1077
1078 dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state);
1079
1080 status = ti_write_byte(port, tport->tp_tdev,
1081 tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
1082 TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
1083
1084 if (status) {
1085 dev_dbg(&port->dev, "%s - error setting break, %d\n", __func__, status);
1086 return status;
1087 }
1088
1089 return 0;
1090 }
1091
ti_get_port_from_code(unsigned char code)1092 static int ti_get_port_from_code(unsigned char code)
1093 {
1094 return (code >> 6) & 0x01;
1095 }
1096
ti_get_func_from_code(unsigned char code)1097 static int ti_get_func_from_code(unsigned char code)
1098 {
1099 return code & 0x0f;
1100 }
1101
ti_interrupt_callback(struct urb * urb)1102 static void ti_interrupt_callback(struct urb *urb)
1103 {
1104 struct ti_device *tdev = urb->context;
1105 struct usb_serial_port *port;
1106 struct usb_serial *serial = tdev->td_serial;
1107 struct ti_port *tport;
1108 struct device *dev = &urb->dev->dev;
1109 unsigned char *data = urb->transfer_buffer;
1110 int length = urb->actual_length;
1111 int port_number;
1112 int function;
1113 int status = urb->status;
1114 int retval;
1115 u8 msr;
1116
1117 switch (status) {
1118 case 0:
1119 break;
1120 case -ECONNRESET:
1121 case -ENOENT:
1122 case -ESHUTDOWN:
1123 dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
1124 return;
1125 default:
1126 dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status);
1127 goto exit;
1128 }
1129
1130 if (length != 2) {
1131 dev_dbg(dev, "%s - bad packet size, %d\n", __func__, length);
1132 goto exit;
1133 }
1134
1135 if (data[0] == TI_CODE_HARDWARE_ERROR) {
1136 dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]);
1137 goto exit;
1138 }
1139
1140 port_number = ti_get_port_from_code(data[0]);
1141 function = ti_get_func_from_code(data[0]);
1142
1143 dev_dbg(dev, "%s - port_number %d, function %d, data 0x%02X\n",
1144 __func__, port_number, function, data[1]);
1145
1146 if (port_number >= serial->num_ports) {
1147 dev_err(dev, "%s - bad port number, %d\n",
1148 __func__, port_number);
1149 goto exit;
1150 }
1151
1152 port = serial->port[port_number];
1153
1154 tport = usb_get_serial_port_data(port);
1155 if (!tport)
1156 goto exit;
1157
1158 switch (function) {
1159 case TI_CODE_DATA_ERROR:
1160 dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n",
1161 __func__, port_number, data[1]);
1162 break;
1163
1164 case TI_CODE_MODEM_STATUS:
1165 msr = data[1];
1166 dev_dbg(dev, "%s - port %d, msr 0x%02X\n", __func__, port_number, msr);
1167 ti_handle_new_msr(tport, msr);
1168 break;
1169
1170 default:
1171 dev_err(dev, "%s - unknown interrupt code, 0x%02X\n",
1172 __func__, data[1]);
1173 break;
1174 }
1175
1176 exit:
1177 retval = usb_submit_urb(urb, GFP_ATOMIC);
1178 if (retval)
1179 dev_err(dev, "%s - resubmit interrupt urb failed, %d\n",
1180 __func__, retval);
1181 }
1182
1183
ti_bulk_in_callback(struct urb * urb)1184 static void ti_bulk_in_callback(struct urb *urb)
1185 {
1186 struct ti_port *tport = urb->context;
1187 struct usb_serial_port *port = tport->tp_port;
1188 struct device *dev = &urb->dev->dev;
1189 int status = urb->status;
1190 unsigned long flags;
1191 int retval = 0;
1192
1193 switch (status) {
1194 case 0:
1195 break;
1196 case -ECONNRESET:
1197 case -ENOENT:
1198 case -ESHUTDOWN:
1199 dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
1200 return;
1201 default:
1202 dev_err(dev, "%s - nonzero urb status, %d\n",
1203 __func__, status);
1204 }
1205
1206 if (status == -EPIPE)
1207 goto exit;
1208
1209 if (status) {
1210 dev_err(dev, "%s - stopping read!\n", __func__);
1211 return;
1212 }
1213
1214 if (urb->actual_length) {
1215 usb_serial_debug_data(dev, __func__, urb->actual_length,
1216 urb->transfer_buffer);
1217
1218 if (!tport->tp_is_open)
1219 dev_dbg(dev, "%s - port closed, dropping data\n",
1220 __func__);
1221 else
1222 ti_recv(port, urb->transfer_buffer, urb->actual_length);
1223 spin_lock_irqsave(&tport->tp_lock, flags);
1224 port->icount.rx += urb->actual_length;
1225 spin_unlock_irqrestore(&tport->tp_lock, flags);
1226 }
1227
1228 exit:
1229 /* continue to read unless stopping */
1230 spin_lock_irqsave(&tport->tp_lock, flags);
1231 if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1232 retval = usb_submit_urb(urb, GFP_ATOMIC);
1233 else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING)
1234 tport->tp_read_urb_state = TI_READ_URB_STOPPED;
1235
1236 spin_unlock_irqrestore(&tport->tp_lock, flags);
1237 if (retval)
1238 dev_err(dev, "%s - resubmit read urb failed, %d\n",
1239 __func__, retval);
1240 }
1241
1242
ti_bulk_out_callback(struct urb * urb)1243 static void ti_bulk_out_callback(struct urb *urb)
1244 {
1245 struct ti_port *tport = urb->context;
1246 struct usb_serial_port *port = tport->tp_port;
1247 int status = urb->status;
1248
1249 tport->tp_write_urb_in_use = 0;
1250
1251 switch (status) {
1252 case 0:
1253 break;
1254 case -ECONNRESET:
1255 case -ENOENT:
1256 case -ESHUTDOWN:
1257 dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status);
1258 return;
1259 default:
1260 dev_err_console(port, "%s - nonzero urb status, %d\n",
1261 __func__, status);
1262 }
1263
1264 /* send any buffered data */
1265 ti_send(tport);
1266 }
1267
1268
ti_recv(struct usb_serial_port * port,unsigned char * data,int length)1269 static void ti_recv(struct usb_serial_port *port, unsigned char *data,
1270 int length)
1271 {
1272 int cnt;
1273
1274 do {
1275 cnt = tty_insert_flip_string(&port->port, data, length);
1276 if (cnt < length) {
1277 dev_err(&port->dev, "%s - dropping data, %d bytes lost\n",
1278 __func__, length - cnt);
1279 if (cnt == 0)
1280 break;
1281 }
1282 tty_flip_buffer_push(&port->port);
1283 data += cnt;
1284 length -= cnt;
1285 } while (length > 0);
1286 }
1287
1288
ti_send(struct ti_port * tport)1289 static void ti_send(struct ti_port *tport)
1290 {
1291 int count, result;
1292 struct usb_serial_port *port = tport->tp_port;
1293 unsigned long flags;
1294
1295 spin_lock_irqsave(&tport->tp_lock, flags);
1296
1297 if (tport->tp_write_urb_in_use)
1298 goto unlock;
1299
1300 count = kfifo_out(&port->write_fifo,
1301 port->write_urb->transfer_buffer,
1302 port->bulk_out_size);
1303
1304 if (count == 0)
1305 goto unlock;
1306
1307 tport->tp_write_urb_in_use = 1;
1308
1309 spin_unlock_irqrestore(&tport->tp_lock, flags);
1310
1311 usb_serial_debug_data(&port->dev, __func__, count,
1312 port->write_urb->transfer_buffer);
1313
1314 usb_fill_bulk_urb(port->write_urb, port->serial->dev,
1315 usb_sndbulkpipe(port->serial->dev,
1316 port->bulk_out_endpointAddress),
1317 port->write_urb->transfer_buffer, count,
1318 ti_bulk_out_callback, tport);
1319
1320 result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
1321 if (result) {
1322 dev_err_console(port, "%s - submit write urb failed, %d\n",
1323 __func__, result);
1324 tport->tp_write_urb_in_use = 0;
1325 /* TODO: reschedule ti_send */
1326 } else {
1327 spin_lock_irqsave(&tport->tp_lock, flags);
1328 port->icount.tx += count;
1329 spin_unlock_irqrestore(&tport->tp_lock, flags);
1330 }
1331
1332 /* more room in the buffer for new writes, wakeup */
1333 tty_port_tty_wakeup(&port->port);
1334
1335 return;
1336 unlock:
1337 spin_unlock_irqrestore(&tport->tp_lock, flags);
1338 return;
1339 }
1340
1341
ti_set_mcr(struct ti_port * tport,unsigned int mcr)1342 static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
1343 {
1344 unsigned long flags;
1345 int status;
1346
1347 status = ti_write_byte(tport->tp_port, tport->tp_tdev,
1348 tport->tp_uart_base_addr + TI_UART_OFFSET_MCR,
1349 TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr);
1350
1351 spin_lock_irqsave(&tport->tp_lock, flags);
1352 if (!status)
1353 tport->tp_shadow_mcr = mcr;
1354 spin_unlock_irqrestore(&tport->tp_lock, flags);
1355
1356 return status;
1357 }
1358
1359
ti_get_lsr(struct ti_port * tport,u8 * lsr)1360 static int ti_get_lsr(struct ti_port *tport, u8 *lsr)
1361 {
1362 int size, status;
1363 struct usb_serial_port *port = tport->tp_port;
1364 struct ti_port_status *data;
1365
1366 size = sizeof(struct ti_port_status);
1367 data = kmalloc(size, GFP_KERNEL);
1368 if (!data)
1369 return -ENOMEM;
1370
1371 status = ti_port_cmd_in(port, TI_GET_PORT_STATUS, 0, data, size);
1372 if (status) {
1373 dev_err(&port->dev,
1374 "%s - get port status command failed, %d\n",
1375 __func__, status);
1376 goto free_data;
1377 }
1378
1379 dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR);
1380
1381 *lsr = data->bLSR;
1382
1383 free_data:
1384 kfree(data);
1385 return status;
1386 }
1387
1388
ti_get_serial_info(struct tty_struct * tty,struct serial_struct * ss)1389 static void ti_get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
1390 {
1391 struct usb_serial_port *port = tty->driver_data;
1392 struct ti_port *tport = usb_get_serial_port_data(port);
1393
1394 ss->baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
1395 }
1396
1397
ti_handle_new_msr(struct ti_port * tport,u8 msr)1398 static void ti_handle_new_msr(struct ti_port *tport, u8 msr)
1399 {
1400 struct async_icount *icount;
1401 struct tty_struct *tty;
1402 unsigned long flags;
1403
1404 dev_dbg(&tport->tp_port->dev, "%s - msr 0x%02X\n", __func__, msr);
1405
1406 if (msr & TI_MSR_DELTA_MASK) {
1407 spin_lock_irqsave(&tport->tp_lock, flags);
1408 icount = &tport->tp_port->icount;
1409 if (msr & TI_MSR_DELTA_CTS)
1410 icount->cts++;
1411 if (msr & TI_MSR_DELTA_DSR)
1412 icount->dsr++;
1413 if (msr & TI_MSR_DELTA_CD)
1414 icount->dcd++;
1415 if (msr & TI_MSR_DELTA_RI)
1416 icount->rng++;
1417 wake_up_interruptible(&tport->tp_port->port.delta_msr_wait);
1418 spin_unlock_irqrestore(&tport->tp_lock, flags);
1419 }
1420
1421 tport->tp_msr = msr & TI_MSR_MASK;
1422
1423 /* handle CTS flow control */
1424 tty = tty_port_tty_get(&tport->tp_port->port);
1425 if (tty && C_CRTSCTS(tty)) {
1426 if (msr & TI_MSR_CTS)
1427 tty_wakeup(tty);
1428 }
1429 tty_kref_put(tty);
1430 }
1431
1432
ti_stop_read(struct ti_port * tport,struct tty_struct * tty)1433 static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty)
1434 {
1435 unsigned long flags;
1436
1437 spin_lock_irqsave(&tport->tp_lock, flags);
1438
1439 if (tport->tp_read_urb_state == TI_READ_URB_RUNNING)
1440 tport->tp_read_urb_state = TI_READ_URB_STOPPING;
1441
1442 spin_unlock_irqrestore(&tport->tp_lock, flags);
1443 }
1444
1445
ti_restart_read(struct ti_port * tport,struct tty_struct * tty)1446 static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty)
1447 {
1448 struct urb *urb;
1449 int status = 0;
1450 unsigned long flags;
1451
1452 spin_lock_irqsave(&tport->tp_lock, flags);
1453
1454 if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) {
1455 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1456 urb = tport->tp_port->read_urb;
1457 spin_unlock_irqrestore(&tport->tp_lock, flags);
1458 urb->context = tport;
1459 status = usb_submit_urb(urb, GFP_KERNEL);
1460 } else {
1461 tport->tp_read_urb_state = TI_READ_URB_RUNNING;
1462 spin_unlock_irqrestore(&tport->tp_lock, flags);
1463 }
1464
1465 return status;
1466 }
1467
ti_command_out_sync(struct usb_device * udev,u8 command,u16 moduleid,u16 value,void * data,int size)1468 static int ti_command_out_sync(struct usb_device *udev, u8 command,
1469 u16 moduleid, u16 value, void *data, int size)
1470 {
1471 int status;
1472
1473 status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), command,
1474 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
1475 value, moduleid, data, size, 1000);
1476 if (status < 0)
1477 return status;
1478
1479 return 0;
1480 }
1481
ti_command_in_sync(struct usb_device * udev,u8 command,u16 moduleid,u16 value,void * data,int size)1482 static int ti_command_in_sync(struct usb_device *udev, u8 command,
1483 u16 moduleid, u16 value, void *data, int size)
1484 {
1485 int status;
1486
1487 status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), command,
1488 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
1489 value, moduleid, data, size, 1000);
1490 if (status == size)
1491 status = 0;
1492 else if (status >= 0)
1493 status = -ECOMM;
1494
1495 return status;
1496 }
1497
ti_port_cmd_out(struct usb_serial_port * port,u8 command,u16 value,void * data,int size)1498 static int ti_port_cmd_out(struct usb_serial_port *port, u8 command,
1499 u16 value, void *data, int size)
1500 {
1501 return ti_command_out_sync(port->serial->dev, command,
1502 TI_UART1_PORT + port->port_number,
1503 value, data, size);
1504 }
1505
ti_port_cmd_in(struct usb_serial_port * port,u8 command,u16 value,void * data,int size)1506 static int ti_port_cmd_in(struct usb_serial_port *port, u8 command,
1507 u16 value, void *data, int size)
1508 {
1509 return ti_command_in_sync(port->serial->dev, command,
1510 TI_UART1_PORT + port->port_number,
1511 value, data, size);
1512 }
1513
ti_write_byte(struct usb_serial_port * port,struct ti_device * tdev,unsigned long addr,u8 mask,u8 byte)1514 static int ti_write_byte(struct usb_serial_port *port,
1515 struct ti_device *tdev, unsigned long addr,
1516 u8 mask, u8 byte)
1517 {
1518 int status;
1519 unsigned int size;
1520 struct ti_write_data_bytes *data;
1521
1522 dev_dbg(&port->dev, "%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X\n", __func__,
1523 addr, mask, byte);
1524
1525 size = sizeof(struct ti_write_data_bytes) + 2;
1526 data = kmalloc(size, GFP_KERNEL);
1527 if (!data)
1528 return -ENOMEM;
1529
1530 data->bAddrType = TI_RW_DATA_ADDR_XDATA;
1531 data->bDataType = TI_RW_DATA_BYTE;
1532 data->bDataCounter = 1;
1533 data->wBaseAddrHi = cpu_to_be16(addr>>16);
1534 data->wBaseAddrLo = cpu_to_be16(addr);
1535 data->bData[0] = mask;
1536 data->bData[1] = byte;
1537
1538 status = ti_command_out_sync(port->serial->dev, TI_WRITE_DATA,
1539 TI_RAM_PORT, 0, data, size);
1540 if (status < 0)
1541 dev_err(&port->dev, "%s - failed, %d\n", __func__, status);
1542
1543 kfree(data);
1544
1545 return status;
1546 }
1547
ti_do_download(struct usb_device * dev,int pipe,u8 * buffer,int size)1548 static int ti_do_download(struct usb_device *dev, int pipe,
1549 u8 *buffer, int size)
1550 {
1551 int pos;
1552 u8 cs = 0;
1553 int done;
1554 struct ti_firmware_header *header;
1555 int status = 0;
1556 int len;
1557
1558 for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
1559 cs = (u8)(cs + buffer[pos]);
1560
1561 header = (struct ti_firmware_header *)buffer;
1562 header->wLength = cpu_to_le16(size - sizeof(*header));
1563 header->bCheckSum = cs;
1564
1565 dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
1566 for (pos = 0; pos < size; pos += done) {
1567 len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
1568 status = usb_bulk_msg(dev, pipe, buffer + pos, len,
1569 &done, 1000);
1570 if (status)
1571 break;
1572 }
1573 return status;
1574 }
1575
ti_download_firmware(struct ti_device * tdev)1576 static int ti_download_firmware(struct ti_device *tdev)
1577 {
1578 int status;
1579 int buffer_size;
1580 u8 *buffer;
1581 struct usb_device *dev = tdev->td_serial->dev;
1582 unsigned int pipe = usb_sndbulkpipe(dev,
1583 tdev->td_serial->port[0]->bulk_out_endpointAddress);
1584 const struct firmware *fw_p;
1585 char buf[32];
1586
1587 if (le16_to_cpu(dev->descriptor.idVendor) == MXU1_VENDOR_ID) {
1588 snprintf(buf,
1589 sizeof(buf),
1590 "moxa/moxa-%04x.fw",
1591 le16_to_cpu(dev->descriptor.idProduct));
1592
1593 status = request_firmware(&fw_p, buf, &dev->dev);
1594 goto check_firmware;
1595 }
1596
1597 /* try ID specific firmware first, then try generic firmware */
1598 sprintf(buf, "ti_usb-v%04x-p%04x.fw",
1599 le16_to_cpu(dev->descriptor.idVendor),
1600 le16_to_cpu(dev->descriptor.idProduct));
1601 status = request_firmware(&fw_p, buf, &dev->dev);
1602
1603 if (status != 0) {
1604 buf[0] = '\0';
1605 if (le16_to_cpu(dev->descriptor.idVendor) == MTS_VENDOR_ID) {
1606 switch (le16_to_cpu(dev->descriptor.idProduct)) {
1607 case MTS_CDMA_PRODUCT_ID:
1608 strcpy(buf, "mts_cdma.fw");
1609 break;
1610 case MTS_GSM_PRODUCT_ID:
1611 strcpy(buf, "mts_gsm.fw");
1612 break;
1613 case MTS_EDGE_PRODUCT_ID:
1614 strcpy(buf, "mts_edge.fw");
1615 break;
1616 case MTS_MT9234MU_PRODUCT_ID:
1617 strcpy(buf, "mts_mt9234mu.fw");
1618 break;
1619 case MTS_MT9234ZBA_PRODUCT_ID:
1620 strcpy(buf, "mts_mt9234zba.fw");
1621 break;
1622 case MTS_MT9234ZBAOLD_PRODUCT_ID:
1623 strcpy(buf, "mts_mt9234zba.fw");
1624 break; }
1625 }
1626 if (buf[0] == '\0') {
1627 if (tdev->td_is_3410)
1628 strcpy(buf, "ti_3410.fw");
1629 else
1630 strcpy(buf, "ti_5052.fw");
1631 }
1632 status = request_firmware(&fw_p, buf, &dev->dev);
1633 }
1634
1635 check_firmware:
1636 if (status) {
1637 dev_err(&dev->dev, "%s - firmware not found\n", __func__);
1638 return -ENOENT;
1639 }
1640 if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
1641 dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
1642 release_firmware(fw_p);
1643 return -ENOENT;
1644 }
1645
1646 buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
1647 buffer = kmalloc(buffer_size, GFP_KERNEL);
1648 if (buffer) {
1649 memcpy(buffer, fw_p->data, fw_p->size);
1650 memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
1651 status = ti_do_download(dev, pipe, buffer, fw_p->size);
1652 kfree(buffer);
1653 } else {
1654 status = -ENOMEM;
1655 }
1656 release_firmware(fw_p);
1657 if (status) {
1658 dev_err(&dev->dev, "%s - error downloading firmware, %d\n",
1659 __func__, status);
1660 return status;
1661 }
1662
1663 dev_dbg(&dev->dev, "%s - download successful\n", __func__);
1664
1665 return 0;
1666 }
1667