1 /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
2 /*
3 * include/uapi/linux/tipc_config.h: Header for TIPC configuration interface
4 *
5 * Copyright (c) 2003-2006, Ericsson AB
6 * Copyright (c) 2005-2007, 2010-2011, Wind River Systems
7 * All rights reserved.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions are met:
11 *
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. Neither the names of the copyright holders nor the names of its
18 * contributors may be used to endorse or promote products derived from
19 * this software without specific prior written permission.
20 *
21 * Alternatively, this software may be distributed under the terms of the
22 * GNU General Public License ("GPL") version 2 as published by the Free
23 * Software Foundation.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
26 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
28 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
29 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35 * POSSIBILITY OF SUCH DAMAGE.
36 */
37
38 #ifndef _LINUX_TIPC_CONFIG_H_
39 #define _LINUX_TIPC_CONFIG_H_
40
41 #include <linux/types.h>
42 #include <linux/string.h>
43 #include <linux/tipc.h>
44 #include <asm/byteorder.h>
45
46 /*
47 * Configuration
48 *
49 * All configuration management messaging involves sending a request message
50 * to the TIPC configuration service on a node, which sends a reply message
51 * back. (In the future multi-message replies may be supported.)
52 *
53 * Both request and reply messages consist of a transport header and payload.
54 * The transport header contains info about the desired operation;
55 * the payload consists of zero or more type/length/value (TLV) items
56 * which specify parameters or results for the operation.
57 *
58 * For many operations, the request and reply messages have a fixed number
59 * of TLVs (usually zero or one); however, some reply messages may return
60 * a variable number of TLVs. A failed request is denoted by the presence
61 * of an "error string" TLV in the reply message instead of the TLV(s) the
62 * reply should contain if the request succeeds.
63 */
64
65 /*
66 * Public commands:
67 * May be issued by any process.
68 * Accepted by own node, or by remote node only if remote management enabled.
69 */
70
71 #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */
72 #define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */
73 #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */
74 #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */
75 #define TIPC_CMD_GET_LINKS 0x0004 /* tx net_addr, rx link_info(s) */
76 #define TIPC_CMD_SHOW_NAME_TABLE 0x0005 /* tx name_tbl_query, rx ultra_string */
77 #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */
78 #define TIPC_CMD_SHOW_LINK_STATS 0x000B /* tx link_name, rx ultra_string */
79 #define TIPC_CMD_SHOW_STATS 0x000F /* tx unsigned, rx ultra_string */
80
81 /*
82 * Protected commands:
83 * May only be issued by "network administration capable" process.
84 * Accepted by own node, or by remote node only if remote management enabled
85 * and this node is zone manager.
86 */
87
88 #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */
89 #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */
90 #define TIPC_CMD_GET_MAX_PUBL 0x4005 /* obsoleted */
91 #define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* obsoleted */
92 #define TIPC_CMD_GET_MAX_ZONES 0x4007 /* obsoleted */
93 #define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* obsoleted */
94 #define TIPC_CMD_GET_MAX_NODES 0x4009 /* obsoleted */
95 #define TIPC_CMD_GET_MAX_SLAVES 0x400A /* obsoleted */
96 #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */
97
98 #define TIPC_CMD_ENABLE_BEARER 0x4101 /* tx bearer_config, rx none */
99 #define TIPC_CMD_DISABLE_BEARER 0x4102 /* tx bearer_name, rx none */
100 #define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */
101 #define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */
102 #define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */
103 #define TIPC_CMD_SET_LOG_SIZE 0x410A /* obsoleted */
104 #define TIPC_CMD_DUMP_LOG 0x410B /* obsoleted */
105 #define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */
106
107 /*
108 * Private commands:
109 * May only be issued by "network administration capable" process.
110 * Accepted by own node only; cannot be used on a remote node.
111 */
112
113 #define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */
114 #define TIPC_CMD_SET_REMOTE_MNG 0x8003 /* tx unsigned, rx none */
115 #define TIPC_CMD_SET_MAX_PORTS 0x8004 /* tx unsigned, rx none */
116 #define TIPC_CMD_SET_MAX_PUBL 0x8005 /* obsoleted */
117 #define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* obsoleted */
118 #define TIPC_CMD_SET_MAX_ZONES 0x8007 /* obsoleted */
119 #define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* obsoleted */
120 #define TIPC_CMD_SET_MAX_NODES 0x8009 /* obsoleted */
121 #define TIPC_CMD_SET_MAX_SLAVES 0x800A /* obsoleted */
122 #define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */
123
124 /*
125 * Reserved commands:
126 * May not be issued by any process.
127 * Used internally by TIPC.
128 */
129
130 #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */
131
132 /*
133 * TLV types defined for TIPC
134 */
135
136 #define TIPC_TLV_NONE 0 /* no TLV present */
137 #define TIPC_TLV_VOID 1 /* empty TLV (0 data bytes)*/
138 #define TIPC_TLV_UNSIGNED 2 /* 32-bit integer */
139 #define TIPC_TLV_STRING 3 /* char[128] (max) */
140 #define TIPC_TLV_LARGE_STRING 4 /* char[2048] (max) */
141 #define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */
142
143 #define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */
144 #define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */
145 #define TIPC_TLV_MEDIA_NAME 18 /* char[TIPC_MAX_MEDIA_NAME] */
146 #define TIPC_TLV_BEARER_NAME 19 /* char[TIPC_MAX_BEARER_NAME] */
147 #define TIPC_TLV_LINK_NAME 20 /* char[TIPC_MAX_LINK_NAME] */
148 #define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */
149 #define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */
150 #define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */
151 #define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */
152 #define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */
153 #define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */
154
155 /*
156 * Link priority limits (min, default, max, media default)
157 */
158
159 #define TIPC_MIN_LINK_PRI 0
160 #define TIPC_DEF_LINK_PRI 10
161 #define TIPC_MAX_LINK_PRI 31
162 #define TIPC_MEDIA_LINK_PRI (TIPC_MAX_LINK_PRI + 1)
163
164 /*
165 * Link tolerance limits (min, default, max), in ms
166 */
167
168 #define TIPC_MIN_LINK_TOL 50
169 #define TIPC_DEF_LINK_TOL 1500
170 #define TIPC_MAX_LINK_TOL 30000
171
172 #if (TIPC_MIN_LINK_TOL < 16)
173 #error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)"
174 #endif
175
176 /*
177 * Link window limits (min, default, max), in packets
178 */
179
180 #define TIPC_MIN_LINK_WIN 16
181 #define TIPC_DEF_LINK_WIN 50
182 #define TIPC_MAX_LINK_WIN 8191
183
184 /*
185 * Default MTU for UDP media
186 */
187
188 #define TIPC_DEF_LINK_UDP_MTU 14000
189
190 struct tipc_node_info {
191 __be32 addr; /* network address of node */
192 __be32 up; /* 0=down, 1= up */
193 };
194
195 struct tipc_link_info {
196 __be32 dest; /* network address of peer node */
197 __be32 up; /* 0=down, 1=up */
198 char str[TIPC_MAX_LINK_NAME]; /* link name */
199 };
200
201 struct tipc_bearer_config {
202 __be32 priority; /* Range [1,31]. Override per link */
203 __be32 disc_domain; /* <Z.C.N> describing desired nodes */
204 char name[TIPC_MAX_BEARER_NAME];
205 };
206
207 struct tipc_link_config {
208 __be32 value;
209 char name[TIPC_MAX_LINK_NAME];
210 };
211
212 #define TIPC_NTQ_ALLTYPES 0x80000000
213
214 struct tipc_name_table_query {
215 __be32 depth; /* 1:type, 2:+name info, 3:+port info, 4+:+debug info */
216 __be32 type; /* {t,l,u} info ignored if high bit of "depth" is set */
217 __be32 lowbound; /* (i.e. displays all entries of name table) */
218 __be32 upbound;
219 };
220
221 /*
222 * The error string TLV is a null-terminated string describing the cause
223 * of the request failure. To simplify error processing (and to save space)
224 * the first character of the string can be a special error code character
225 * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason.
226 */
227
228 #define TIPC_CFG_TLV_ERROR "\x80" /* request contains incorrect TLV(s) */
229 #define TIPC_CFG_NOT_NET_ADMIN "\x81" /* must be network administrator */
230 #define TIPC_CFG_NOT_ZONE_MSTR "\x82" /* must be zone master */
231 #define TIPC_CFG_NO_REMOTE "\x83" /* remote management not enabled */
232 #define TIPC_CFG_NOT_SUPPORTED "\x84" /* request is not supported by TIPC */
233 #define TIPC_CFG_INVALID_VALUE "\x85" /* request has invalid argument value */
234
235 /*
236 * A TLV consists of a descriptor, followed by the TLV value.
237 * TLV descriptor fields are stored in network byte order;
238 * TLV values must also be stored in network byte order (where applicable).
239 * TLV descriptors must be aligned to addresses which are multiple of 4,
240 * so up to 3 bytes of padding may exist at the end of the TLV value area.
241 * There must not be any padding between the TLV descriptor and its value.
242 */
243
244 struct tlv_desc {
245 __be16 tlv_len; /* TLV length (descriptor + value) */
246 __be16 tlv_type; /* TLV identifier */
247 };
248
249 #define TLV_ALIGNTO 4
250
251 #define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1))
252 #define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen))
253 #define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen)))
254 #define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0)))
255
TLV_OK(const void * tlv,__u16 space)256 static inline int TLV_OK(const void *tlv, __u16 space)
257 {
258 /*
259 * Would also like to check that "tlv" is a multiple of 4,
260 * but don't know how to do this in a portable way.
261 * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler
262 * won't allow binary "&" with a pointer.
263 * - Tried casting "tlv" to integer type, but causes warning about size
264 * mismatch when pointer is bigger than chosen type (int, long, ...).
265 */
266
267 return (space >= TLV_SPACE(0)) &&
268 (__be16_to_cpu(((struct tlv_desc *)tlv)->tlv_len) <= space);
269 }
270
TLV_CHECK(const void * tlv,__u16 space,__u16 exp_type)271 static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type)
272 {
273 return TLV_OK(tlv, space) &&
274 (__be16_to_cpu(((struct tlv_desc *)tlv)->tlv_type) == exp_type);
275 }
276
TLV_GET_LEN(struct tlv_desc * tlv)277 static inline int TLV_GET_LEN(struct tlv_desc *tlv)
278 {
279 return __be16_to_cpu(tlv->tlv_len);
280 }
281
TLV_SET_LEN(struct tlv_desc * tlv,__u16 len)282 static inline void TLV_SET_LEN(struct tlv_desc *tlv, __u16 len)
283 {
284 tlv->tlv_len = __cpu_to_be16(len);
285 }
286
TLV_CHECK_TYPE(struct tlv_desc * tlv,__u16 type)287 static inline int TLV_CHECK_TYPE(struct tlv_desc *tlv, __u16 type)
288 {
289 return (__be16_to_cpu(tlv->tlv_type) == type);
290 }
291
TLV_SET_TYPE(struct tlv_desc * tlv,__u16 type)292 static inline void TLV_SET_TYPE(struct tlv_desc *tlv, __u16 type)
293 {
294 tlv->tlv_type = __cpu_to_be16(type);
295 }
296
TLV_SET(void * tlv,__u16 type,void * data,__u16 len)297 static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len)
298 {
299 struct tlv_desc *tlv_ptr;
300 int tlv_len;
301
302 tlv_len = TLV_LENGTH(len);
303 tlv_ptr = (struct tlv_desc *)tlv;
304 tlv_ptr->tlv_type = __cpu_to_be16(type);
305 tlv_ptr->tlv_len = __cpu_to_be16(tlv_len);
306 if (len && data) {
307 memcpy(TLV_DATA(tlv_ptr), data, len);
308 memset((char *)TLV_DATA(tlv_ptr) + len, 0, TLV_SPACE(len) - tlv_len);
309 }
310 return TLV_SPACE(len);
311 }
312
313 /*
314 * A TLV list descriptor simplifies processing of messages
315 * containing multiple TLVs.
316 */
317
318 struct tlv_list_desc {
319 struct tlv_desc *tlv_ptr; /* ptr to current TLV */
320 __u32 tlv_space; /* # bytes from curr TLV to list end */
321 };
322
TLV_LIST_INIT(struct tlv_list_desc * list,void * data,__u32 space)323 static inline void TLV_LIST_INIT(struct tlv_list_desc *list,
324 void *data, __u32 space)
325 {
326 list->tlv_ptr = (struct tlv_desc *)data;
327 list->tlv_space = space;
328 }
329
TLV_LIST_EMPTY(struct tlv_list_desc * list)330 static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list)
331 {
332 return (list->tlv_space == 0);
333 }
334
TLV_LIST_CHECK(struct tlv_list_desc * list,__u16 exp_type)335 static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type)
336 {
337 return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type);
338 }
339
TLV_LIST_DATA(struct tlv_list_desc * list)340 static inline void *TLV_LIST_DATA(struct tlv_list_desc *list)
341 {
342 return TLV_DATA(list->tlv_ptr);
343 }
344
TLV_LIST_STEP(struct tlv_list_desc * list)345 static inline void TLV_LIST_STEP(struct tlv_list_desc *list)
346 {
347 __u16 tlv_space = TLV_ALIGN(__be16_to_cpu(list->tlv_ptr->tlv_len));
348
349 list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
350 list->tlv_space -= tlv_space;
351 }
352
353 /*
354 * Configuration messages exchanged via NETLINK_GENERIC use the following
355 * family id, name, version and command.
356 */
357 #define TIPC_GENL_NAME "TIPC"
358 #define TIPC_GENL_VERSION 0x1
359 #define TIPC_GENL_CMD 0x1
360
361 /*
362 * TIPC specific header used in NETLINK_GENERIC requests.
363 */
364 struct tipc_genlmsghdr {
365 __u32 dest; /* Destination address */
366 __u16 cmd; /* Command */
367 __u16 reserved; /* Unused */
368 };
369
370 #define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr))
371
372 /*
373 * Configuration messages exchanged via TIPC sockets use the TIPC configuration
374 * message header, which is defined below. This structure is analogous
375 * to the Netlink message header, but fields are stored in network byte order
376 * and no padding is permitted between the header and the message data
377 * that follows.
378 */
379
380 struct tipc_cfg_msg_hdr {
381 __be32 tcm_len; /* Message length (including header) */
382 __be16 tcm_type; /* Command type */
383 __be16 tcm_flags; /* Additional flags */
384 char tcm_reserved[8]; /* Unused */
385 };
386
387 #define TCM_F_REQUEST 0x1 /* Flag: Request message */
388 #define TCM_F_MORE 0x2 /* Flag: Message to be continued */
389
390 #define TCM_ALIGN(datalen) (((datalen)+3) & ~3)
391 #define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen)
392 #define TCM_SPACE(datalen) (TCM_ALIGN(TCM_LENGTH(datalen)))
393 #define TCM_DATA(tcm_hdr) ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0)))
394
TCM_SET(void * msg,__u16 cmd,__u16 flags,void * data,__u16 data_len)395 static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags,
396 void *data, __u16 data_len)
397 {
398 struct tipc_cfg_msg_hdr *tcm_hdr;
399 int msg_len;
400
401 msg_len = TCM_LENGTH(data_len);
402 tcm_hdr = (struct tipc_cfg_msg_hdr *)msg;
403 tcm_hdr->tcm_len = __cpu_to_be32(msg_len);
404 tcm_hdr->tcm_type = __cpu_to_be16(cmd);
405 tcm_hdr->tcm_flags = __cpu_to_be16(flags);
406 if (data_len && data) {
407 memcpy(TCM_DATA(msg), data, data_len);
408 memset((char *)TCM_DATA(msg) + data_len, 0, TCM_SPACE(data_len) - msg_len);
409 }
410 return TCM_SPACE(data_len);
411 }
412
413 #endif
414