1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright (C) 2017-2018, Intel Corporation 4 * Copyright (C) 2025, Altera Corporation 5 */ 6 7 #ifndef __STRATIX10_SVC_CLIENT_H 8 #define __STRATIX10_SVC_CLIENT_H 9 10 /* 11 * Service layer driver supports client names 12 * 13 * fpga: for FPGA configuration 14 * rsu: for remote status update 15 * hwmon: for hardware monitoring (voltage and temperature) 16 */ 17 #define SVC_CLIENT_FPGA "fpga" 18 #define SVC_CLIENT_RSU "rsu" 19 #define SVC_CLIENT_FCS "fcs" 20 #define SVC_CLIENT_HWMON "hwmon" 21 22 /* 23 * Status of the sent command, in bit number 24 * 25 * SVC_STATUS_OK: 26 * Secure firmware accepts the request issued by one of service clients. 27 * 28 * SVC_STATUS_BUFFER_SUBMITTED: 29 * Service client successfully submits data buffer to secure firmware. 30 * 31 * SVC_STATUS_BUFFER_DONE: 32 * Secure firmware completes data process, ready to accept the 33 * next WRITE transaction. 34 * 35 * SVC_STATUS_COMPLETED: 36 * Secure firmware completes service request successfully. In case of 37 * FPGA configuration, FPGA should be in user mode. 38 * 39 * SVC_COMMAND_STATUS_BUSY: 40 * Service request is still in process. 41 * 42 * SVC_COMMAND_STATUS_ERROR: 43 * Error encountered during the process of the service request. 44 * 45 * SVC_STATUS_NO_SUPPORT: 46 * Secure firmware doesn't support requested features such as RSU retry 47 * or RSU notify. 48 */ 49 #define SVC_STATUS_OK 0 50 #define SVC_STATUS_BUFFER_SUBMITTED 1 51 #define SVC_STATUS_BUFFER_DONE 2 52 #define SVC_STATUS_COMPLETED 3 53 #define SVC_STATUS_BUSY 4 54 #define SVC_STATUS_ERROR 5 55 #define SVC_STATUS_NO_SUPPORT 6 56 #define SVC_STATUS_INVALID_PARAM 7 57 58 /* 59 * Flag bit for COMMAND_RECONFIG 60 * 61 * COMMAND_RECONFIG_FLAG_PARTIAL: 62 * Set to FPGA configuration type (full or partial). 63 */ 64 #define COMMAND_RECONFIG_FLAG_PARTIAL 0 65 66 /* 67 * Timeout settings for service clients: 68 * timeout value used in Stratix10 FPGA manager driver. 69 * timeout value used in RSU driver 70 */ 71 #define SVC_RECONFIG_REQUEST_TIMEOUT_MS 300 72 #define SVC_RECONFIG_BUFFER_TIMEOUT_MS 720 73 #define SVC_RSU_REQUEST_TIMEOUT_MS 300 74 #define SVC_FCS_REQUEST_TIMEOUT_MS 2000 75 #define SVC_COMPLETED_TIMEOUT_MS 30000 76 #define SVC_HWMON_REQUEST_TIMEOUT_MS 300 77 78 struct stratix10_svc_chan; 79 80 /** 81 * enum stratix10_svc_command_code - supported service commands 82 * 83 * @COMMAND_NOOP: do 'dummy' request for integration/debug/trouble-shooting 84 * 85 * @COMMAND_RECONFIG: ask for FPGA configuration preparation, return status 86 * is SVC_STATUS_OK 87 * 88 * @COMMAND_RECONFIG_DATA_SUBMIT: submit buffer(s) of bit-stream data for the 89 * FPGA configuration, return status is SVC_STATUS_SUBMITTED or SVC_STATUS_ERROR 90 * 91 * @COMMAND_RECONFIG_DATA_CLAIM: check the status of the configuration, return 92 * status is SVC_STATUS_COMPLETED, or SVC_STATUS_BUSY, or SVC_STATUS_ERROR 93 * 94 * @COMMAND_RECONFIG_STATUS: check the status of the configuration, return 95 * status is SVC_STATUS_COMPLETED, or SVC_STATUS_BUSY, or SVC_STATUS_ERROR 96 * 97 * @COMMAND_RSU_STATUS: request remote system update boot log, return status 98 * is log data or SVC_STATUS_RSU_ERROR 99 * 100 * @COMMAND_RSU_UPDATE: set the offset of the bitstream to boot after reboot, 101 * return status is SVC_STATUS_OK or SVC_STATUS_ERROR 102 * 103 * @COMMAND_RSU_NOTIFY: report the status of hard processor system 104 * software to firmware, return status is SVC_STATUS_OK or 105 * SVC_STATUS_ERROR 106 * 107 * @COMMAND_RSU_RETRY: query firmware for the current image's retry counter, 108 * return status is SVC_STATUS_OK or SVC_STATUS_ERROR 109 * 110 * @COMMAND_RSU_MAX_RETRY: query firmware for the max retry value, 111 * return status is SVC_STATUS_OK or SVC_STATUS_ERROR 112 * 113 * @COMMAND_RSU_DCMF_VERSION: query firmware for the DCMF version, return status 114 * is SVC_STATUS_OK or SVC_STATUS_ERROR 115 * 116 * @COMMAND_POLL_SERVICE_STATUS: poll if the service request is complete, 117 * return statis is SVC_STATUS_OK, SVC_STATUS_ERROR or SVC_STATUS_BUSY 118 * 119 * @COMMAND_FIRMWARE_VERSION: query running firmware version, return status 120 * is SVC_STATUS_OK or SVC_STATUS_ERROR 121 * 122 * @COMMAND_SMC_SVC_VERSION: Non-mailbox SMC SVC API Version, 123 * return status is SVC_STATUS_OK 124 * 125 * @COMMAND_MBOX_SEND_CMD: send generic mailbox command, return status is 126 * SVC_STATUS_OK or SVC_STATUS_ERROR 127 * 128 * @COMMAND_RSU_DCMF_STATUS: query firmware for the DCMF status 129 * return status is SVC_STATUS_OK or SVC_STATUS_ERROR 130 * 131 * @COMMAND_RSU_GET_SPT_TABLE: query firmware for SPT table 132 * return status is SVC_STATUS_OK or SVC_STATUS_ERROR 133 * 134 * @COMMAND_FCS_REQUEST_SERVICE: request validation of image from firmware, 135 * return status is SVC_STATUS_OK, SVC_STATUS_INVALID_PARAM 136 * 137 * @COMMAND_FCS_SEND_CERTIFICATE: send a certificate, return status is 138 * SVC_STATUS_OK, SVC_STATUS_INVALID_PARAM, SVC_STATUS_ERROR 139 * 140 * @COMMAND_FCS_GET_PROVISION_DATA: read the provisioning data, return status is 141 * SVC_STATUS_OK, SVC_STATUS_INVALID_PARAM, SVC_STATUS_ERROR 142 * 143 * @COMMAND_FCS_DATA_ENCRYPTION: encrypt the data, return status is 144 * SVC_STATUS_OK, SVC_STATUS_INVALID_PARAM, SVC_STATUS_ERROR 145 * 146 * @COMMAND_FCS_DATA_DECRYPTION: decrypt the data, return status is 147 * SVC_STATUS_OK, SVC_STATUS_INVALID_PARAM, SVC_STATUS_ERROR 148 * 149 * @COMMAND_FCS_RANDOM_NUMBER_GEN: generate a random number, return status 150 * is SVC_STATUS_OK, SVC_STATUS_ERROR 151 * 152 * @COMMAND_HWMON_READTEMP: query the temperature from the hardware monitor, 153 * return status is SVC_STATUS_OK or SVC_STATUS_ERROR 154 * 155 * @COMMAND_HWMON_READVOLT: query the voltage from the hardware monitor, 156 * return status is SVC_STATUS_OK or SVC_STATUS_ERROR 157 */ 158 enum stratix10_svc_command_code { 159 /* for FPGA */ 160 COMMAND_NOOP = 0, 161 COMMAND_RECONFIG, 162 COMMAND_RECONFIG_DATA_SUBMIT, 163 COMMAND_RECONFIG_DATA_CLAIM, 164 COMMAND_RECONFIG_STATUS, 165 /* for RSU */ 166 COMMAND_RSU_STATUS = 10, 167 COMMAND_RSU_UPDATE, 168 COMMAND_RSU_NOTIFY, 169 COMMAND_RSU_RETRY, 170 COMMAND_RSU_MAX_RETRY, 171 COMMAND_RSU_DCMF_VERSION, 172 COMMAND_RSU_DCMF_STATUS, 173 COMMAND_FIRMWARE_VERSION, 174 COMMAND_RSU_GET_SPT_TABLE, 175 /* for FCS */ 176 COMMAND_FCS_REQUEST_SERVICE = 20, 177 COMMAND_FCS_SEND_CERTIFICATE, 178 COMMAND_FCS_GET_PROVISION_DATA, 179 COMMAND_FCS_DATA_ENCRYPTION, 180 COMMAND_FCS_DATA_DECRYPTION, 181 COMMAND_FCS_RANDOM_NUMBER_GEN, 182 /* for general status poll */ 183 COMMAND_POLL_SERVICE_STATUS = 40, 184 /* for generic mailbox send command */ 185 COMMAND_MBOX_SEND_CMD = 100, 186 /* Non-mailbox SMC Call */ 187 COMMAND_SMC_SVC_VERSION = 200, 188 /* for HWMON */ 189 COMMAND_HWMON_READTEMP, 190 COMMAND_HWMON_READVOLT 191 }; 192 193 /** 194 * struct stratix10_svc_client_msg - message sent by client to service 195 * @payload: starting address of data need be processed 196 * @payload_length: to be processed data size in bytes 197 * @payload_output: starting address of processed data 198 * @payload_length_output: processed data size in bytes 199 * @command: service command 200 * @arg: args to be passed via registers and not physically mapped buffers 201 */ 202 struct stratix10_svc_client_msg { 203 void *payload; 204 size_t payload_length; 205 void *payload_output; 206 size_t payload_length_output; 207 enum stratix10_svc_command_code command; 208 u64 arg[3]; 209 }; 210 211 /** 212 * struct stratix10_svc_command_config_type - config type 213 * @flags: flag bit for the type of FPGA configuration 214 */ 215 struct stratix10_svc_command_config_type { 216 u32 flags; 217 }; 218 219 /** 220 * struct stratix10_svc_cb_data - callback data structure from service layer 221 * @status: the status of sent command 222 * @kaddr1: address of 1st completed data block 223 * @kaddr2: address of 2nd completed data block 224 * @kaddr3: address of 3rd completed data block 225 */ 226 struct stratix10_svc_cb_data { 227 u32 status; 228 void *kaddr1; 229 void *kaddr2; 230 void *kaddr3; 231 }; 232 233 /** 234 * struct stratix10_svc_client - service client structure 235 * @dev: the client device 236 * @receive_cb: callback to provide service client the received data 237 * @priv: client private data 238 */ 239 struct stratix10_svc_client { 240 struct device *dev; 241 void (*receive_cb)(struct stratix10_svc_client *client, 242 struct stratix10_svc_cb_data *cb_data); 243 void *priv; 244 }; 245 246 /** 247 * stratix10_svc_request_channel_byname() - request service channel 248 * @client: identity of the client requesting the channel 249 * @name: supporting client name defined above 250 * 251 * Return: a pointer to channel assigned to the client on success, 252 * or ERR_PTR() on error. 253 */ 254 struct stratix10_svc_chan 255 *stratix10_svc_request_channel_byname(struct stratix10_svc_client *client, 256 const char *name); 257 258 /** 259 * stratix10_svc_free_channel() - free service channel. 260 * @chan: service channel to be freed 261 */ 262 void stratix10_svc_free_channel(struct stratix10_svc_chan *chan); 263 264 /** 265 * stratix10_svc_allocate_memory() - allocate the momory 266 * @chan: service channel assigned to the client 267 * @size: number of bytes client requests 268 * 269 * Service layer allocates the requested number of bytes from the memory 270 * pool for the client. 271 * 272 * Return: the starting address of allocated memory on success, or 273 * ERR_PTR() on error. 274 */ 275 void *stratix10_svc_allocate_memory(struct stratix10_svc_chan *chan, 276 size_t size); 277 278 /** 279 * stratix10_svc_free_memory() - free allocated memory 280 * @chan: service channel assigned to the client 281 * @kaddr: starting address of memory to be free back to pool 282 */ 283 void stratix10_svc_free_memory(struct stratix10_svc_chan *chan, void *kaddr); 284 285 /** 286 * stratix10_svc_send() - send a message to the remote 287 * @chan: service channel assigned to the client 288 * @msg: message data to be sent, in the format of 289 * struct stratix10_svc_client_msg 290 * 291 * Return: 0 for success, -ENOMEM or -ENOBUFS on error. 292 */ 293 int stratix10_svc_send(struct stratix10_svc_chan *chan, void *msg); 294 295 /** 296 * stratix10_svc_done() - complete service request 297 * @chan: service channel assigned to the client 298 * 299 * This function is used by service client to inform service layer that 300 * client's service requests are completed, or there is an error in the 301 * request process. 302 */ 303 void stratix10_svc_done(struct stratix10_svc_chan *chan); 304 305 /** 306 * typedef async_callback_t - A type definition for an asynchronous callback function. 307 * 308 * This type defines a function pointer for an asynchronous callback. 309 * The callback function takes a single argument, which is a pointer to 310 * user-defined data. 311 * 312 * @cb_arg: Argument to be passed to the callback function. 313 */ 314 typedef void (*async_callback_t)(void *cb_arg); 315 316 /** 317 * stratix10_svc_add_async_client - Add an asynchronous client to a Stratix 10 318 * service channel. 319 * @chan: Pointer to the Stratix 10 service channel structure. 320 * @use_unique_clientid: Boolean flag indicating whether to use a unique client ID. 321 * 322 * This function registers an asynchronous client with the specified Stratix 10 323 * service channel. If the use_unique_clientid flag is set to true, a unique client 324 * ID will be assigned to the client. 325 * 326 * Return: 0 on success, or a negative error code on failure: 327 * -EINVAL if the channel is NULL or the async controller is not initialized. 328 * -EALREADY if the async channel is already allocated. 329 * -ENOMEM if memory allocation fails. 330 * Other negative values if ID allocation fails 331 */ 332 int stratix10_svc_add_async_client(struct stratix10_svc_chan *chan, bool use_unique_clientid); 333 334 /** 335 * stratix10_svc_remove_async_client - Remove an asynchronous client from the Stratix 10 336 * service channel. 337 * @chan: Pointer to the Stratix 10 service channel structure. 338 * 339 * This function removes an asynchronous client from the specified Stratix 10 service channel. 340 * It is typically used to clean up and release resources associated with the client. 341 * 342 * Return: 0 on success, -EINVAL if the channel or asynchronous channel is invalid. 343 */ 344 int stratix10_svc_remove_async_client(struct stratix10_svc_chan *chan); 345 346 /** 347 * stratix10_svc_async_send - Send an asynchronous message to the SDM mailbox 348 * in EL3 secure firmware. 349 * @chan: Pointer to the service channel structure. 350 * @msg: Pointer to the message to be sent. 351 * @handler: Pointer to the handler object used by caller to track the transaction. 352 * @cb: Callback function to be called upon completion. 353 * @cb_arg: Argument to be passed to the callback function. 354 * 355 * This function sends a message asynchronously to the SDM mailbox in EL3 secure firmware. 356 * and registers a callback function to be invoked when the operation completes. 357 * 358 * Return: 0 on success,and negative error codes on failure. 359 */ 360 int stratix10_svc_async_send(struct stratix10_svc_chan *chan, void *msg, void **handler, 361 async_callback_t cb, void *cb_arg); 362 363 /** 364 * stratix10_svc_async_poll - Polls the status of an asynchronous service request. 365 * @chan: Pointer to the service channel structure. 366 * @tx_handle: Handle to the transaction being polled. 367 * @data: Pointer to the callback data structure to be filled with the result. 368 * 369 * This function checks the status of an asynchronous service request 370 * and fills the provided callback data structure with the result. 371 * 372 * Return: 0 on success, -EINVAL if any input parameter is invalid or if the 373 * async controller is not initialized, -EAGAIN if the transaction is 374 * still in progress, or other negative error codes on failure. 375 */ 376 int stratix10_svc_async_poll(struct stratix10_svc_chan *chan, void *tx_handle, 377 struct stratix10_svc_cb_data *data); 378 379 /** 380 * stratix10_svc_async_done - Complete an asynchronous transaction 381 * @chan: Pointer to the service channel structure 382 * @tx_handle: Pointer to the transaction handle 383 * 384 * This function completes an asynchronous transaction by removing the 385 * transaction from the hash table and deallocating the associated resources. 386 * 387 * Return: 0 on success, -EINVAL on invalid input or errors. 388 */ 389 int stratix10_svc_async_done(struct stratix10_svc_chan *chan, void *tx_handle); 390 391 #endif 392 393