1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Support for Sharp SL-Cxx00 Series of PDAs
4 * Models: SL-C3000 (Spitz), SL-C1000 (Akita) and SL-C3100 (Borzoi)
5 *
6 * Copyright (c) 2005 Richard Purdie
7 *
8 * Based on Sharp's 2.4 kernel patches/lubbock.c
9 */
10
11 #include <linux/kernel.h>
12 #include <linux/platform_device.h>
13 #include <linux/delay.h>
14 #include <linux/gpio_keys.h>
15 #include <linux/gpio.h>
16 #include <linux/gpio/machine.h>
17 #include <linux/gpio/property.h>
18 #include <linux/leds.h>
19 #include <linux/i2c.h>
20 #include <linux/platform_data/i2c-pxa.h>
21 #include <linux/platform_data/pca953x.h>
22 #include <linux/property.h>
23 #include <linux/spi/spi.h>
24 #include <linux/spi/ads7846.h>
25 #include <linux/spi/corgi_lcd.h>
26 #include <linux/mtd/sharpsl.h>
27 #include <linux/mtd/physmap.h>
28 #include <linux/input-event-codes.h>
29 #include <linux/input/matrix_keypad.h>
30 #include <linux/regulator/machine.h>
31 #include <linux/io.h>
32 #include <linux/property.h>
33 #include <linux/reboot.h>
34 #include <linux/memblock.h>
35
36 #include <asm/setup.h>
37 #include <asm/mach-types.h>
38 #include <asm/mach/arch.h>
39 #include <asm/mach/sharpsl_param.h>
40 #include <asm/hardware/scoop.h>
41
42 #include "pxa27x.h"
43 #include "pxa27x-udc.h"
44 #include "reset.h"
45 #include <linux/platform_data/mmc-pxamci.h>
46 #include <linux/platform_data/usb-ohci-pxa27x.h>
47 #include <linux/platform_data/video-pxafb.h>
48 #include "spitz.h"
49 #include "sharpsl_pm.h"
50 #include "smemc.h"
51
52 #include "generic.h"
53 #include "devices.h"
54
55 /******************************************************************************
56 * Pin configuration
57 ******************************************************************************/
58 static unsigned long spitz_pin_config[] __initdata = {
59 /* Chip Selects */
60 GPIO78_nCS_2, /* SCOOP #2 */
61 GPIO79_nCS_3, /* NAND */
62 GPIO80_nCS_4, /* SCOOP #1 */
63
64 /* LCD - 16bpp Active TFT */
65 GPIOxx_LCD_TFT_16BPP,
66
67 /* PC Card */
68 GPIO48_nPOE,
69 GPIO49_nPWE,
70 GPIO50_nPIOR,
71 GPIO51_nPIOW,
72 GPIO85_nPCE_1,
73 GPIO54_nPCE_2,
74 GPIO55_nPREG,
75 GPIO56_nPWAIT,
76 GPIO57_nIOIS16,
77 GPIO104_PSKTSEL,
78
79 /* I2S */
80 GPIO28_I2S_BITCLK_OUT,
81 GPIO29_I2S_SDATA_IN,
82 GPIO30_I2S_SDATA_OUT,
83 GPIO31_I2S_SYNC,
84
85 /* MMC */
86 GPIO32_MMC_CLK,
87 GPIO112_MMC_CMD,
88 GPIO92_MMC_DAT_0,
89 GPIO109_MMC_DAT_1,
90 GPIO110_MMC_DAT_2,
91 GPIO111_MMC_DAT_3,
92
93 /* GPIOs */
94 GPIO9_GPIO, /* SPITZ_GPIO_nSD_DETECT */
95 GPIO16_GPIO, /* SPITZ_GPIO_SYNC */
96 GPIO81_GPIO, /* SPITZ_GPIO_nSD_WP */
97 GPIO41_GPIO, /* SPITZ_GPIO_USB_CONNECT */
98 GPIO37_GPIO, /* SPITZ_GPIO_USB_HOST */
99 GPIO35_GPIO, /* SPITZ_GPIO_USB_DEVICE */
100 GPIO22_GPIO, /* SPITZ_GPIO_HSYNC */
101 GPIO94_GPIO, /* SPITZ_GPIO_CF_CD */
102 GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */
103 GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */
104
105 /* GPIO matrix keypad */
106 GPIO88_GPIO, /* column 0 */
107 GPIO23_GPIO, /* column 1 */
108 GPIO24_GPIO, /* column 2 */
109 GPIO25_GPIO, /* column 3 */
110 GPIO26_GPIO, /* column 4 */
111 GPIO27_GPIO, /* column 5 */
112 GPIO52_GPIO, /* column 6 */
113 GPIO103_GPIO, /* column 7 */
114 GPIO107_GPIO, /* column 8 */
115 GPIO108_GPIO, /* column 9 */
116 GPIO114_GPIO, /* column 10 */
117 GPIO12_GPIO, /* row 0 */
118 GPIO17_GPIO, /* row 1 */
119 GPIO91_GPIO, /* row 2 */
120 GPIO34_GPIO, /* row 3 */
121 GPIO36_GPIO, /* row 4 */
122 GPIO38_GPIO, /* row 5 */
123 GPIO39_GPIO, /* row 6 */
124
125 /* I2C */
126 GPIO117_I2C_SCL,
127 GPIO118_I2C_SDA,
128
129 GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, /* SPITZ_GPIO_KEY_INT */
130 GPIO1_GPIO | WAKEUP_ON_EDGE_FALL, /* SPITZ_GPIO_RESET */
131 };
132
133 static const struct software_node spitz_scoop_1_gpiochip_node = {
134 .name = "sharp-scoop.0",
135 };
136
137 /* Only on Spitz */
138 static const struct software_node spitz_scoop_2_gpiochip_node = {
139 .name = "sharp-scoop.1",
140 };
141
142 /* Only on Akita */
143 static const struct software_node akita_max7310_gpiochip_node = {
144 .name = "i2c-max7310",
145 };
146
147 /******************************************************************************
148 * Scoop GPIO expander
149 ******************************************************************************/
150 #if defined(CONFIG_SHARP_SCOOP) || defined(CONFIG_SHARP_SCOOP_MODULE)
151 /* SCOOP Device #1 */
152 static struct resource spitz_scoop_1_resources[] = {
153 [0] = {
154 .start = 0x10800000,
155 .end = 0x10800fff,
156 .flags = IORESOURCE_MEM,
157 },
158 };
159
160 static struct scoop_config spitz_scoop_1_setup = {
161 .io_dir = SPITZ_SCP_IO_DIR,
162 .io_out = SPITZ_SCP_IO_OUT,
163 .suspend_clr = SPITZ_SCP_SUS_CLR,
164 .suspend_set = SPITZ_SCP_SUS_SET,
165 .gpio_base = SPITZ_SCP_GPIO_BASE,
166 };
167
168 struct platform_device spitz_scoop_1_device = {
169 .name = "sharp-scoop",
170 .id = 0,
171 .dev = {
172 .platform_data = &spitz_scoop_1_setup,
173 },
174 .num_resources = ARRAY_SIZE(spitz_scoop_1_resources),
175 .resource = spitz_scoop_1_resources,
176 };
177
178 /* SCOOP Device #2 */
179 static struct resource spitz_scoop_2_resources[] = {
180 [0] = {
181 .start = 0x08800040,
182 .end = 0x08800fff,
183 .flags = IORESOURCE_MEM,
184 },
185 };
186
187 static struct scoop_config spitz_scoop_2_setup = {
188 .io_dir = SPITZ_SCP2_IO_DIR,
189 .io_out = SPITZ_SCP2_IO_OUT,
190 .suspend_clr = SPITZ_SCP2_SUS_CLR,
191 .suspend_set = SPITZ_SCP2_SUS_SET,
192 .gpio_base = SPITZ_SCP2_GPIO_BASE,
193 };
194
195 struct platform_device spitz_scoop_2_device = {
196 .name = "sharp-scoop",
197 .id = 1,
198 .dev = {
199 .platform_data = &spitz_scoop_2_setup,
200 },
201 .num_resources = ARRAY_SIZE(spitz_scoop_2_resources),
202 .resource = spitz_scoop_2_resources,
203 };
204
spitz_scoop_init(void)205 static void __init spitz_scoop_init(void)
206 {
207 platform_device_register(&spitz_scoop_1_device);
208
209 /* Akita doesn't have the second SCOOP chip */
210 if (!machine_is_akita())
211 platform_device_register(&spitz_scoop_2_device);
212 }
213
214 /* Power control is shared with between one of the CF slots and SD */
spitz_card_pwr_ctrl(uint8_t enable,uint8_t new_cpr)215 static void __maybe_unused spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
216 {
217 unsigned short cpr;
218 unsigned long flags;
219
220 if (new_cpr & 0x7) {
221 gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
222 mdelay(5);
223 }
224
225 local_irq_save(flags);
226
227 cpr = read_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR);
228
229 if (enable & new_cpr)
230 cpr |= new_cpr;
231 else
232 cpr &= ~enable;
233
234 write_scoop_reg(&spitz_scoop_1_device.dev, SCOOP_CPR, cpr);
235
236 local_irq_restore(flags);
237
238 if (!(cpr & 0x7)) {
239 mdelay(1);
240 gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
241 }
242 }
243
244 #else
spitz_scoop_init(void)245 static inline void spitz_scoop_init(void) {}
spitz_card_pwr_ctrl(uint8_t enable,uint8_t new_cpr)246 static inline void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr) {}
247 #endif
248
249 /******************************************************************************
250 * PCMCIA
251 ******************************************************************************/
252 #if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
spitz_pcmcia_pwr(struct device * scoop,uint16_t cpr,int nr)253 static void spitz_pcmcia_pwr(struct device *scoop, uint16_t cpr, int nr)
254 {
255 /* Only need to override behaviour for slot 0 */
256 if (nr == 0)
257 spitz_card_pwr_ctrl(
258 cpr & (SCOOP_CPR_CF_3V | SCOOP_CPR_CF_XV), cpr);
259 else
260 write_scoop_reg(scoop, SCOOP_CPR, cpr);
261 }
262
263 static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
264 {
265 .dev = &spitz_scoop_1_device.dev,
266 .irq = SPITZ_IRQ_GPIO_CF_IRQ,
267 .cd_irq = SPITZ_IRQ_GPIO_CF_CD,
268 .cd_irq_str = "PCMCIA0 CD",
269 }, {
270 .dev = &spitz_scoop_2_device.dev,
271 .irq = SPITZ_IRQ_GPIO_CF2_IRQ,
272 .cd_irq = -1,
273 },
274 };
275
276 static struct scoop_pcmcia_config spitz_pcmcia_config = {
277 .devs = &spitz_pcmcia_scoop[0],
278 .num_devs = 2,
279 .power_ctrl = spitz_pcmcia_pwr,
280 };
281
spitz_pcmcia_init(void)282 static void __init spitz_pcmcia_init(void)
283 {
284 /* Akita has only one PCMCIA slot used */
285 if (machine_is_akita())
286 spitz_pcmcia_config.num_devs = 1;
287
288 platform_scoop_config = &spitz_pcmcia_config;
289 }
290 #else
spitz_pcmcia_init(void)291 static inline void spitz_pcmcia_init(void) {}
292 #endif
293
294 /******************************************************************************
295 * GPIO keyboard
296 ******************************************************************************/
297 #if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
298
299 #define SPITZ_KEY_CALENDAR KEY_F1
300 #define SPITZ_KEY_ADDRESS KEY_F2
301 #define SPITZ_KEY_FN KEY_F3
302 #define SPITZ_KEY_CANCEL KEY_F4
303 #define SPITZ_KEY_EXOK KEY_F5
304 #define SPITZ_KEY_EXCANCEL KEY_F6
305 #define SPITZ_KEY_EXJOGDOWN KEY_F7
306 #define SPITZ_KEY_EXJOGUP KEY_F8
307 #define SPITZ_KEY_JAP1 KEY_LEFTALT
308 #define SPITZ_KEY_JAP2 KEY_RIGHTCTRL
309 #define SPITZ_KEY_SYNC KEY_F9
310 #define SPITZ_KEY_MAIL KEY_F10
311 #define SPITZ_KEY_OK KEY_F11
312 #define SPITZ_KEY_MENU KEY_F12
313
314 static const uint32_t spitz_keymap[] = {
315 KEY(0, 0, KEY_LEFTCTRL),
316 KEY(0, 1, KEY_1),
317 KEY(0, 2, KEY_3),
318 KEY(0, 3, KEY_5),
319 KEY(0, 4, KEY_6),
320 KEY(0, 5, KEY_7),
321 KEY(0, 6, KEY_9),
322 KEY(0, 7, KEY_0),
323 KEY(0, 8, KEY_BACKSPACE),
324 KEY(0, 9, SPITZ_KEY_EXOK), /* EXOK */
325 KEY(0, 10, SPITZ_KEY_EXCANCEL), /* EXCANCEL */
326 KEY(1, 1, KEY_2),
327 KEY(1, 2, KEY_4),
328 KEY(1, 3, KEY_R),
329 KEY(1, 4, KEY_Y),
330 KEY(1, 5, KEY_8),
331 KEY(1, 6, KEY_I),
332 KEY(1, 7, KEY_O),
333 KEY(1, 8, KEY_P),
334 KEY(1, 9, SPITZ_KEY_EXJOGDOWN), /* EXJOGDOWN */
335 KEY(1, 10, SPITZ_KEY_EXJOGUP), /* EXJOGUP */
336 KEY(2, 0, KEY_TAB),
337 KEY(2, 1, KEY_Q),
338 KEY(2, 2, KEY_E),
339 KEY(2, 3, KEY_T),
340 KEY(2, 4, KEY_G),
341 KEY(2, 5, KEY_U),
342 KEY(2, 6, KEY_J),
343 KEY(2, 7, KEY_K),
344 KEY(3, 0, SPITZ_KEY_ADDRESS), /* ADDRESS */
345 KEY(3, 1, KEY_W),
346 KEY(3, 2, KEY_S),
347 KEY(3, 3, KEY_F),
348 KEY(3, 4, KEY_V),
349 KEY(3, 5, KEY_H),
350 KEY(3, 6, KEY_M),
351 KEY(3, 7, KEY_L),
352 KEY(3, 9, KEY_RIGHTSHIFT),
353 KEY(4, 0, SPITZ_KEY_CALENDAR), /* CALENDAR */
354 KEY(4, 1, KEY_A),
355 KEY(4, 2, KEY_D),
356 KEY(4, 3, KEY_C),
357 KEY(4, 4, KEY_B),
358 KEY(4, 5, KEY_N),
359 KEY(4, 6, KEY_DOT),
360 KEY(4, 8, KEY_ENTER),
361 KEY(4, 9, KEY_LEFTSHIFT),
362 KEY(5, 0, SPITZ_KEY_MAIL), /* MAIL */
363 KEY(5, 1, KEY_Z),
364 KEY(5, 2, KEY_X),
365 KEY(5, 3, KEY_MINUS),
366 KEY(5, 4, KEY_SPACE),
367 KEY(5, 5, KEY_COMMA),
368 KEY(5, 7, KEY_UP),
369 KEY(5, 10, SPITZ_KEY_FN), /* FN */
370 KEY(6, 0, KEY_SYSRQ),
371 KEY(6, 1, SPITZ_KEY_JAP1), /* JAP1 */
372 KEY(6, 2, SPITZ_KEY_JAP2), /* JAP2 */
373 KEY(6, 3, SPITZ_KEY_CANCEL), /* CANCEL */
374 KEY(6, 4, SPITZ_KEY_OK), /* OK */
375 KEY(6, 5, SPITZ_KEY_MENU), /* MENU */
376 KEY(6, 6, KEY_LEFT),
377 KEY(6, 7, KEY_DOWN),
378 KEY(6, 8, KEY_RIGHT),
379 };
380
381 static const struct software_node_ref_args spitz_mkp_row_gpios[] = {
382 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 12, GPIO_ACTIVE_HIGH),
383 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 17, GPIO_ACTIVE_HIGH),
384 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 91, GPIO_ACTIVE_HIGH),
385 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 34, GPIO_ACTIVE_HIGH),
386 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 36, GPIO_ACTIVE_HIGH),
387 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 38, GPIO_ACTIVE_HIGH),
388 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 39, GPIO_ACTIVE_HIGH),
389 };
390
391 static const struct software_node_ref_args spitz_mkp_col_gpios[] = {
392 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 88, GPIO_ACTIVE_HIGH),
393 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 23, GPIO_ACTIVE_HIGH),
394 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 24, GPIO_ACTIVE_HIGH),
395 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 25, GPIO_ACTIVE_HIGH),
396 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 26, GPIO_ACTIVE_HIGH),
397 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 27, GPIO_ACTIVE_HIGH),
398 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 52, GPIO_ACTIVE_HIGH),
399 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 103, GPIO_ACTIVE_HIGH),
400 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 107, GPIO_ACTIVE_HIGH),
401 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 108, GPIO_ACTIVE_HIGH),
402 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 114, GPIO_ACTIVE_HIGH),
403 };
404
405 static const struct property_entry spitz_mkp_properties[] = {
406 PROPERTY_ENTRY_U32_ARRAY("linux,keymap", spitz_keymap),
407 PROPERTY_ENTRY_REF_ARRAY("row-gpios", spitz_mkp_row_gpios),
408 PROPERTY_ENTRY_REF_ARRAY("col-gpios", spitz_mkp_col_gpios),
409 PROPERTY_ENTRY_U32("col-scan-delay-us", 10),
410 PROPERTY_ENTRY_U32("debounce-delay-ms", 10),
411 PROPERTY_ENTRY_BOOL("wakeup-source"),
412 { }
413 };
414
415 static const struct platform_device_info spitz_mkp_info __initconst = {
416 .name = "matrix-keypad",
417 .id = PLATFORM_DEVID_NONE,
418 .properties = spitz_mkp_properties,
419 };
420
421
spitz_mkp_init(void)422 static void __init spitz_mkp_init(void)
423 {
424 struct platform_device *pd;
425 int err;
426
427 pd = platform_device_register_full(&spitz_mkp_info);
428 err = PTR_ERR_OR_ZERO(pd);
429 if (err)
430 pr_err("failed to create keypad device: %d\n", err);
431 }
432 #else
spitz_mkp_init(void)433 static inline void spitz_mkp_init(void) {}
434 #endif
435
436 /******************************************************************************
437 * GPIO keys
438 ******************************************************************************/
439 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
440 static const struct software_node spitz_gpio_keys_node = {
441 .name = "spitz-gpio-keys",
442 };
443
444 static const struct property_entry spitz_suspend_key_props[] = {
445 PROPERTY_ENTRY_U32("linux,input-type", EV_PWR),
446 PROPERTY_ENTRY_U32("linux,code", KEY_SUSPEND),
447 PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node,
448 SPITZ_GPIO_ON_KEY, GPIO_ACTIVE_HIGH),
449 PROPERTY_ENTRY_STRING("label", "On Off"),
450 PROPERTY_ENTRY_BOOL("wakeup-source"),
451 { }
452 };
453
454 static const struct software_node spitz_suspend_key_node = {
455 .parent = &spitz_gpio_keys_node,
456 .properties = spitz_suspend_key_props,
457 };
458
459 static const struct property_entry spitz_sw1_props[] = {
460 PROPERTY_ENTRY_U32("linux,input-type", EV_SW),
461 PROPERTY_ENTRY_U32("linux,code", 0),
462 PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node,
463 SPITZ_GPIO_SWA, GPIO_ACTIVE_HIGH),
464 PROPERTY_ENTRY_STRING("label", "Display Down"),
465 { }
466 };
467
468 static const struct software_node spitz_sw1_node = {
469 .parent = &spitz_gpio_keys_node,
470 .properties = spitz_sw1_props,
471 };
472
473 static const struct property_entry spitz_sw2_props[] = {
474 PROPERTY_ENTRY_U32("linux,input-type", EV_SW),
475 PROPERTY_ENTRY_U32("linux,code", 1),
476 PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node,
477 SPITZ_GPIO_SWB, GPIO_ACTIVE_HIGH),
478 PROPERTY_ENTRY_STRING("label", "Lid Closed"),
479 { }
480 };
481
482 static const struct software_node spitz_sw2_node = {
483 .parent = &spitz_gpio_keys_node,
484 .properties = spitz_sw2_props,
485 };
486
487 static const struct software_node *spitz_gpio_keys_swnodes[] = {
488 &spitz_gpio_keys_node,
489 &spitz_suspend_key_node,
490 &spitz_sw1_node,
491 &spitz_sw2_node,
492 NULL
493 };
494
spitz_keys_init(void)495 static void __init spitz_keys_init(void)
496 {
497 struct platform_device_info keys_info = {
498 .name = "gpio-keys",
499 .id = PLATFORM_DEVID_NONE,
500 };
501 struct platform_device *pd;
502 int err;
503
504 err = software_node_register_node_group(spitz_gpio_keys_swnodes);
505 if (err) {
506 pr_err("failed to register gpio-keys software nodes: %d\n", err);
507 return;
508 }
509
510 keys_info.fwnode = software_node_fwnode(&spitz_gpio_keys_node);
511
512 pd = platform_device_register_full(&keys_info);
513 err = PTR_ERR_OR_ZERO(pd);
514 if (err)
515 pr_err("failed to create gpio-keys device: %d\n", err);
516 }
517 #else
spitz_keys_init(void)518 static inline void spitz_keys_init(void) {}
519 #endif
520
521 /******************************************************************************
522 * LEDs
523 ******************************************************************************/
524 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
525 static const struct software_node spitz_gpio_leds_node = {
526 .name = "spitz-leds",
527 };
528
529 static const struct property_entry spitz_orange_led_props[] = {
530 PROPERTY_ENTRY_STRING("linux,default-trigger", "sharpsl-charge"),
531 PROPERTY_ENTRY_GPIO("gpios",
532 &spitz_scoop_1_gpiochip_node, 6, GPIO_ACTIVE_HIGH),
533 { }
534 };
535
536 static const struct software_node spitz_orange_led_node = {
537 .name = "spitz:amber:charge",
538 .parent = &spitz_gpio_leds_node,
539 .properties = spitz_orange_led_props,
540 };
541
542 static const struct property_entry spitz_green_led_props[] = {
543 PROPERTY_ENTRY_STRING("linux,default-trigger", "disk-activity"),
544 PROPERTY_ENTRY_GPIO("gpios",
545 &spitz_scoop_1_gpiochip_node, 0, GPIO_ACTIVE_HIGH),
546 { }
547 };
548
549 static const struct software_node spitz_green_led_node = {
550 .name = "spitz:green:hddactivity",
551 .parent = &spitz_gpio_leds_node,
552 .properties = spitz_green_led_props,
553 };
554
555 static const struct software_node *spitz_gpio_leds_swnodes[] = {
556 &spitz_gpio_leds_node,
557 &spitz_orange_led_node,
558 &spitz_green_led_node,
559 NULL
560 };
561
spitz_leds_init(void)562 static void __init spitz_leds_init(void)
563 {
564 struct platform_device_info led_info = {
565 .name = "leds-gpio",
566 .id = PLATFORM_DEVID_NONE,
567 };
568 struct platform_device *led_dev;
569 int err;
570
571 err = software_node_register_node_group(spitz_gpio_leds_swnodes);
572 if (err) {
573 pr_err("failed to register LED software nodes: %d\n", err);
574 return;
575 }
576
577 led_info.fwnode = software_node_fwnode(&spitz_gpio_leds_node);
578
579 led_dev = platform_device_register_full(&led_info);
580 err = PTR_ERR_OR_ZERO(led_dev);
581 if (err)
582 pr_err("failed to create LED device: %d\n", err);
583 }
584 #else
spitz_leds_init(void)585 static inline void spitz_leds_init(void) {}
586 #endif
587
588 /******************************************************************************
589 * SSP Devices
590 ******************************************************************************/
591 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
592
593 static const struct property_entry spitz_ads7846_props[] = {
594 PROPERTY_ENTRY_STRING("compatible", "ti,ads7846"),
595 PROPERTY_ENTRY_U32("touchscreen-max-pressure", 1024),
596 PROPERTY_ENTRY_U16("ti,x-plate-ohms", 419),
597 PROPERTY_ENTRY_U16("ti,y-plate-ohms", 486),
598 PROPERTY_ENTRY_U16("ti,vref-delay-usecs", 100),
599 PROPERTY_ENTRY_GPIO("pendown-gpios", &pxa2xx_gpiochip_node,
600 SPITZ_GPIO_TP_INT, GPIO_ACTIVE_LOW),
601 PROPERTY_ENTRY_GPIO("ti,hsync-gpios", &pxa2xx_gpiochip_node,
602 SPITZ_GPIO_HSYNC, GPIO_ACTIVE_LOW),
603 { }
604 };
605
606 static const struct software_node spitz_ads7846_swnode = {
607 .name = "ads7846",
608 .properties = spitz_ads7846_props,
609 };
610
611 static const struct property_entry spitz_lcdcon_props[] = {
612 PROPERTY_ENTRY_GPIO("BL_CONT-gpios",
613 &spitz_scoop_2_gpiochip_node, 6, GPIO_ACTIVE_LOW),
614 PROPERTY_ENTRY_GPIO("BL_ON-gpios",
615 &spitz_scoop_2_gpiochip_node, 7, GPIO_ACTIVE_HIGH),
616 { }
617 };
618
619 static const struct property_entry akita_lcdcon_props[] = {
620 PROPERTY_ENTRY_GPIO("BL_ON-gpios",
621 &akita_max7310_gpiochip_node, 3, GPIO_ACTIVE_HIGH),
622 PROPERTY_ENTRY_GPIO("BL_CONT-gpios",
623 &akita_max7310_gpiochip_node, 4, GPIO_ACTIVE_LOW),
624 { }
625 };
626
627 static struct software_node spitz_lcdcon_node = {
628 .name = "spitz-lcdcon",
629 };
630
631 static struct corgi_lcd_platform_data spitz_lcdcon_info = {
632 .init_mode = CORGI_LCD_MODE_VGA,
633 .max_intensity = 0x2f,
634 .default_intensity = 0x1f,
635 .limit_mask = 0x0b,
636 .kick_battery = sharpsl_battery_kick,
637 };
638
639 static struct spi_board_info spitz_spi_devices[] = {
640 {
641 .modalias = "ads7846",
642 .max_speed_hz = 1200000,
643 .bus_num = 2,
644 .chip_select = 0,
645 .swnode = &spitz_ads7846_swnode,
646 .irq = PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
647 }, {
648 .modalias = "corgi-lcd",
649 .max_speed_hz = 50000,
650 .bus_num = 2,
651 .chip_select = 1,
652 .platform_data = &spitz_lcdcon_info,
653 .swnode = &spitz_lcdcon_node,
654 }, {
655 .modalias = "max1111",
656 .max_speed_hz = 450000,
657 .bus_num = 2,
658 .chip_select = 2,
659 },
660 };
661
662 static const struct software_node_ref_args spitz_spi_gpio_refs[] = {
663 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_ADS7846_CS,
664 GPIO_ACTIVE_LOW),
665 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_LCDCON_CS,
666 GPIO_ACTIVE_LOW),
667 SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_MAX1111_CS,
668 GPIO_ACTIVE_LOW),
669 };
670
671 static const struct property_entry spitz_spi_properties[] = {
672 PROPERTY_ENTRY_REF_ARRAY("gpios", spitz_spi_gpio_refs),
673 { }
674 };
675
676 static const struct platform_device_info spitz_spi_device_info = {
677 .name = "pxa2xx-spi",
678 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1 */
679 .id = 2,
680 .properties = spitz_spi_properties,
681 };
682
spitz_spi_init(void)683 static void __init spitz_spi_init(void)
684 {
685 struct platform_device *pd;
686 int err;
687
688 pd = platform_device_register_full(&spitz_spi_device_info);
689 err = PTR_ERR_OR_ZERO(pd);
690 if (err)
691 pr_err("pxa2xx-spi: failed to instantiate SPI controller: %d\n",
692 err);
693
694 spitz_lcdcon_node.properties = machine_is_akita() ?
695 akita_lcdcon_props : spitz_lcdcon_props;
696 spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
697 }
698 #else
spitz_spi_init(void)699 static inline void spitz_spi_init(void) {}
700 #endif
701
702 /******************************************************************************
703 * SD/MMC card controller
704 ******************************************************************************/
705 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
706 /*
707 * NOTE: The card detect interrupt isn't debounced so we delay it by 250ms to
708 * give the card a chance to fully insert/eject.
709 */
spitz_mci_setpower(struct device * dev,unsigned int vdd)710 static int spitz_mci_setpower(struct device *dev, unsigned int vdd)
711 {
712 struct pxamci_platform_data* p_d = dev->platform_data;
713
714 if ((1 << vdd) & p_d->ocr_mask)
715 spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, SCOOP_CPR_SD_3V);
716 else
717 spitz_card_pwr_ctrl(SCOOP_CPR_SD_3V, 0x0);
718
719 return 0;
720 }
721
722 static struct pxamci_platform_data spitz_mci_platform_data = {
723 .detect_delay_ms = 250,
724 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
725 .setpower = spitz_mci_setpower,
726 };
727
728 static const struct property_entry spitz_mci_props[] __initconst = {
729 PROPERTY_ENTRY_GPIO("cd-gpios", &pxa2xx_gpiochip_node,
730 SPITZ_GPIO_nSD_DETECT, GPIO_ACTIVE_LOW),
731 PROPERTY_ENTRY_GPIO("wp-gpios", &pxa2xx_gpiochip_node,
732 SPITZ_GPIO_nSD_WP, GPIO_ACTIVE_LOW),
733 { }
734 };
735
spitz_mmc_init(void)736 static void __init spitz_mmc_init(void)
737 {
738 pxa_set_mci_info(&spitz_mci_platform_data, spitz_mci_props);
739 }
740 #else
spitz_mmc_init(void)741 static inline void spitz_mmc_init(void) {}
742 #endif
743
744 /******************************************************************************
745 * USB Host
746 ******************************************************************************/
747 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
spitz_ohci_init(struct device * dev)748 static int spitz_ohci_init(struct device *dev)
749 {
750 int err;
751
752 err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST");
753 if (err)
754 return err;
755
756 /* Only Port 2 is connected, setup USB Port 2 Output Control Register */
757 UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
758
759 return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
760 }
761
spitz_ohci_exit(struct device * dev)762 static void spitz_ohci_exit(struct device *dev)
763 {
764 gpio_free(SPITZ_GPIO_USB_HOST);
765 }
766
767 static struct pxaohci_platform_data spitz_ohci_platform_data = {
768 .port_mode = PMM_NPS_MODE,
769 .init = spitz_ohci_init,
770 .exit = spitz_ohci_exit,
771 .flags = ENABLE_PORT_ALL | NO_OC_PROTECTION,
772 .power_budget = 150,
773 };
774
spitz_uhc_init(void)775 static void __init spitz_uhc_init(void)
776 {
777 pxa_set_ohci_info(&spitz_ohci_platform_data);
778 }
779 #else
spitz_uhc_init(void)780 static inline void spitz_uhc_init(void) {}
781 #endif
782
783 /******************************************************************************
784 * Framebuffer
785 ******************************************************************************/
786 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
787 static struct pxafb_mode_info spitz_pxafb_modes[] = {
788 {
789 .pixclock = 19231,
790 .xres = 480,
791 .yres = 640,
792 .bpp = 16,
793 .hsync_len = 40,
794 .left_margin = 46,
795 .right_margin = 125,
796 .vsync_len = 3,
797 .upper_margin = 1,
798 .lower_margin = 0,
799 .sync = 0,
800 }, {
801 .pixclock = 134617,
802 .xres = 240,
803 .yres = 320,
804 .bpp = 16,
805 .hsync_len = 20,
806 .left_margin = 20,
807 .right_margin = 46,
808 .vsync_len = 2,
809 .upper_margin = 1,
810 .lower_margin = 0,
811 .sync = 0,
812 },
813 };
814
815 static struct pxafb_mach_info spitz_pxafb_info = {
816 .modes = spitz_pxafb_modes,
817 .num_modes = ARRAY_SIZE(spitz_pxafb_modes),
818 .fixed_modes = 1,
819 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
820 };
821
spitz_lcd_init(void)822 static void __init spitz_lcd_init(void)
823 {
824 pxa_set_fb_info(NULL, &spitz_pxafb_info);
825 }
826 #else
spitz_lcd_init(void)827 static inline void spitz_lcd_init(void) {}
828 #endif
829
830 /******************************************************************************
831 * NAND Flash
832 ******************************************************************************/
833 #if defined(CONFIG_MTD_NAND_SHARPSL) || defined(CONFIG_MTD_NAND_SHARPSL_MODULE)
834 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
835
836 static struct nand_bbt_descr spitz_nand_bbt = {
837 .options = 0,
838 .offs = 4,
839 .len = 2,
840 .pattern = scan_ff_pattern
841 };
842
akita_ooblayout_ecc(struct mtd_info * mtd,int section,struct mtd_oob_region * oobregion)843 static int akita_ooblayout_ecc(struct mtd_info *mtd, int section,
844 struct mtd_oob_region *oobregion)
845 {
846 if (section > 12)
847 return -ERANGE;
848
849 switch (section % 3) {
850 case 0:
851 oobregion->offset = 5;
852 oobregion->length = 1;
853 break;
854
855 case 1:
856 oobregion->offset = 1;
857 oobregion->length = 3;
858 break;
859
860 case 2:
861 oobregion->offset = 6;
862 oobregion->length = 2;
863 break;
864 }
865
866 oobregion->offset += (section / 3) * 0x10;
867
868 return 0;
869 }
870
akita_ooblayout_free(struct mtd_info * mtd,int section,struct mtd_oob_region * oobregion)871 static int akita_ooblayout_free(struct mtd_info *mtd, int section,
872 struct mtd_oob_region *oobregion)
873 {
874 if (section)
875 return -ERANGE;
876
877 oobregion->offset = 8;
878 oobregion->length = 9;
879
880 return 0;
881 }
882
883 static const struct mtd_ooblayout_ops akita_ooblayout_ops = {
884 .ecc = akita_ooblayout_ecc,
885 .free = akita_ooblayout_free,
886 };
887
888 static const char * const probes[] = {
889 "cmdlinepart",
890 "ofpart",
891 "sharpslpart",
892 NULL,
893 };
894
895 static struct sharpsl_nand_platform_data spitz_nand_pdata = {
896 .badblock_pattern = &spitz_nand_bbt,
897 .part_parsers = probes,
898 };
899
900 static struct resource spitz_nand_resources[] = {
901 {
902 .start = PXA_CS3_PHYS,
903 .end = PXA_CS3_PHYS + SZ_4K - 1,
904 .flags = IORESOURCE_MEM,
905 },
906 };
907
908 static struct platform_device spitz_nand_device = {
909 .name = "sharpsl-nand",
910 .id = -1,
911 .resource = spitz_nand_resources,
912 .num_resources = ARRAY_SIZE(spitz_nand_resources),
913 .dev = {
914 .platform_data = &spitz_nand_pdata,
915 }
916 };
917
spitz_nand_init(void)918 static void __init spitz_nand_init(void)
919 {
920 if (machine_is_akita() || machine_is_borzoi()) {
921 spitz_nand_bbt.len = 1;
922 spitz_nand_pdata.ecc_layout = &akita_ooblayout_ops;
923 }
924
925 platform_device_register(&spitz_nand_device);
926 }
927 #else
spitz_nand_init(void)928 static inline void spitz_nand_init(void) {}
929 #endif
930
931 /******************************************************************************
932 * NOR Flash
933 ******************************************************************************/
934 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
935 static struct mtd_partition spitz_rom_parts[] = {
936 {
937 .name ="Boot PROM Filesystem",
938 .offset = 0x00140000,
939 .size = MTDPART_SIZ_FULL,
940 },
941 };
942
943 static struct physmap_flash_data spitz_rom_data = {
944 .width = 2,
945 .nr_parts = ARRAY_SIZE(spitz_rom_parts),
946 .parts = spitz_rom_parts,
947 };
948
949 static struct resource spitz_rom_resources[] = {
950 {
951 .start = PXA_CS0_PHYS,
952 .end = PXA_CS0_PHYS + SZ_8M - 1,
953 .flags = IORESOURCE_MEM,
954 },
955 };
956
957 static struct platform_device spitz_rom_device = {
958 .name = "physmap-flash",
959 .id = -1,
960 .resource = spitz_rom_resources,
961 .num_resources = ARRAY_SIZE(spitz_rom_resources),
962 .dev = {
963 .platform_data = &spitz_rom_data,
964 },
965 };
966
spitz_nor_init(void)967 static void __init spitz_nor_init(void)
968 {
969 platform_device_register(&spitz_rom_device);
970 }
971 #else
spitz_nor_init(void)972 static inline void spitz_nor_init(void) {}
973 #endif
974
975 /******************************************************************************
976 * I2C devices
977 ******************************************************************************/
978 #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
979 static struct pca953x_platform_data akita_pca953x_pdata = {
980 .gpio_base = AKITA_IOEXP_GPIO_BASE,
981 };
982
983 static struct i2c_board_info spitz_i2c_devs[] = {
984 {
985 .type = "wm8750",
986 .addr = 0x1b,
987 }, {
988 .type = "max7310",
989 .addr = 0x18,
990 .platform_data = &akita_pca953x_pdata,
991 },
992 };
993
994 static struct regulator_consumer_supply isl6271a_consumers[] = {
995 REGULATOR_SUPPLY("vcc_core", NULL),
996 };
997
998 static struct regulator_init_data isl6271a_info[] = {
999 {
1000 .constraints = {
1001 .name = "vcc_core range",
1002 .min_uV = 850000,
1003 .max_uV = 1600000,
1004 .always_on = 1,
1005 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
1006 },
1007 .consumer_supplies = isl6271a_consumers,
1008 .num_consumer_supplies = ARRAY_SIZE(isl6271a_consumers),
1009 }
1010 };
1011
1012 static struct i2c_board_info spitz_pi2c_devs[] = {
1013 {
1014 .type = "isl6271a",
1015 .addr = 0x0c,
1016 .platform_data = &isl6271a_info,
1017 },
1018 };
1019
spitz_i2c_init(void)1020 static void __init spitz_i2c_init(void)
1021 {
1022 int size = ARRAY_SIZE(spitz_i2c_devs);
1023
1024 /* Only Akita has the max7310 chip */
1025 if (!machine_is_akita())
1026 size--;
1027
1028 pxa_set_i2c_info(NULL);
1029 pxa27x_set_i2c_power_info(NULL);
1030 i2c_register_board_info(0, spitz_i2c_devs, size);
1031 i2c_register_board_info(1, ARRAY_AND_SIZE(spitz_pi2c_devs));
1032 }
1033 #else
spitz_i2c_init(void)1034 static inline void spitz_i2c_init(void) {}
1035 #endif
1036
1037 static const struct property_entry spitz_audio_props[] = {
1038 PROPERTY_ENTRY_GPIO("mute-l-gpios", &spitz_scoop_1_gpiochip_node, 3,
1039 GPIO_ACTIVE_HIGH),
1040 PROPERTY_ENTRY_GPIO("mute-r-gpios", &spitz_scoop_1_gpiochip_node, 4,
1041 GPIO_ACTIVE_HIGH),
1042 PROPERTY_ENTRY_GPIO("mic-gpios", &spitz_scoop_2_gpiochip_node, 8,
1043 GPIO_ACTIVE_HIGH),
1044 { }
1045 };
1046
1047 static const struct property_entry akita_audio_props[] = {
1048 PROPERTY_ENTRY_GPIO("mute-l-gpios", &spitz_scoop_1_gpiochip_node, 3,
1049 GPIO_ACTIVE_HIGH),
1050 PROPERTY_ENTRY_GPIO("mute-r-gpios", &spitz_scoop_1_gpiochip_node, 4,
1051 GPIO_ACTIVE_HIGH),
1052 PROPERTY_ENTRY_GPIO("mic-gpios", &akita_max7310_gpiochip_node, 2,
1053 GPIO_ACTIVE_HIGH),
1054 { }
1055 };
1056
1057 /******************************************************************************
1058 * Audio devices
1059 ******************************************************************************/
spitz_audio_init(void)1060 static inline void spitz_audio_init(void)
1061 {
1062 struct platform_device_info audio_info = {
1063 .name = "spitz-audio",
1064 .id = PLATFORM_DEVID_NONE,
1065 .properties = machine_is_akita() ?
1066 akita_audio_props : spitz_audio_props,
1067 };
1068
1069 platform_device_register_full(&audio_info);
1070 }
1071
1072 /******************************************************************************
1073 * Machine init
1074 ******************************************************************************/
spitz_poweroff(void)1075 static void spitz_poweroff(void)
1076 {
1077 pxa_restart(REBOOT_GPIO, NULL);
1078 }
1079
spitz_restart(enum reboot_mode mode,const char * cmd)1080 static void spitz_restart(enum reboot_mode mode, const char *cmd)
1081 {
1082 uint32_t msc0 = __raw_readl(MSC0);
1083 /* Bootloader magic for a reboot */
1084 if ((msc0 & 0xffff0000) == 0x7ff00000)
1085 __raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
1086
1087 spitz_poweroff();
1088 }
1089
spitz_init(void)1090 static void __init spitz_init(void)
1091 {
1092 software_node_register(&spitz_scoop_1_gpiochip_node);
1093 if (machine_is_akita())
1094 software_node_register(&akita_max7310_gpiochip_node);
1095 else
1096 software_node_register(&spitz_scoop_2_gpiochip_node);
1097
1098 init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
1099 pm_power_off = spitz_poweroff;
1100
1101 PMCR = 0x00;
1102
1103 /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
1104 PCFR |= PCFR_OPDE;
1105
1106 pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
1107
1108 pxa_set_ffuart_info(NULL);
1109 pxa_set_btuart_info(NULL);
1110 pxa_set_stuart_info(NULL);
1111
1112 spitz_spi_init();
1113 spitz_scoop_init();
1114 spitz_mkp_init();
1115 spitz_keys_init();
1116 spitz_leds_init();
1117 spitz_mmc_init();
1118 spitz_pcmcia_init();
1119 spitz_uhc_init();
1120 spitz_lcd_init();
1121 spitz_nor_init();
1122 spitz_nand_init();
1123 spitz_i2c_init();
1124 spitz_audio_init();
1125
1126 regulator_has_full_constraints();
1127 }
1128
spitz_fixup(struct tag * tags,char ** cmdline)1129 static void __init spitz_fixup(struct tag *tags, char **cmdline)
1130 {
1131 sharpsl_save_param();
1132 memblock_add(0xa0000000, SZ_64M);
1133 }
1134
1135 #ifdef CONFIG_MACH_SPITZ
1136 MACHINE_START(SPITZ, "SHARP Spitz")
1137 .fixup = spitz_fixup,
1138 .map_io = pxa27x_map_io,
1139 .nr_irqs = PXA_NR_IRQS,
1140 .init_irq = pxa27x_init_irq,
1141 .init_machine = spitz_init,
1142 .init_time = pxa_timer_init,
1143 .restart = spitz_restart,
1144 MACHINE_END
1145 #endif
1146
1147 #ifdef CONFIG_MACH_BORZOI
1148 MACHINE_START(BORZOI, "SHARP Borzoi")
1149 .fixup = spitz_fixup,
1150 .map_io = pxa27x_map_io,
1151 .nr_irqs = PXA_NR_IRQS,
1152 .init_irq = pxa27x_init_irq,
1153 .init_machine = spitz_init,
1154 .init_time = pxa_timer_init,
1155 .restart = spitz_restart,
1156 MACHINE_END
1157 #endif
1158
1159 #ifdef CONFIG_MACH_AKITA
1160 MACHINE_START(AKITA, "SHARP Akita")
1161 .fixup = spitz_fixup,
1162 .map_io = pxa27x_map_io,
1163 .nr_irqs = PXA_NR_IRQS,
1164 .init_irq = pxa27x_init_irq,
1165 .init_machine = spitz_init,
1166 .init_time = pxa_timer_init,
1167 .restart = spitz_restart,
1168 MACHINE_END
1169 #endif
1170