1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Micro Crystal RV-3029 / RV-3049 rtc class driver
4 *
5 * Author: Gregory Hermant <gregory.hermant@calao-systems.com>
6 * Michael Buesch <m@bues.ch>
7 *
8 * based on previously existing rtc class drivers
9 */
10
11 #include <linux/module.h>
12 #include <linux/i2c.h>
13 #include <linux/spi/spi.h>
14 #include <linux/bcd.h>
15 #include <linux/rtc.h>
16 #include <linux/delay.h>
17 #include <linux/of.h>
18 #include <linux/hwmon.h>
19 #include <linux/hwmon-sysfs.h>
20 #include <linux/kstrtox.h>
21 #include <linux/regmap.h>
22
23 /* Register map */
24 /* control section */
25 #define RV3029_ONOFF_CTRL 0x00
26 #define RV3029_ONOFF_CTRL_WE BIT(0)
27 #define RV3029_ONOFF_CTRL_TE BIT(1)
28 #define RV3029_ONOFF_CTRL_TAR BIT(2)
29 #define RV3029_ONOFF_CTRL_EERE BIT(3)
30 #define RV3029_ONOFF_CTRL_SRON BIT(4)
31 #define RV3029_ONOFF_CTRL_TD0 BIT(5)
32 #define RV3029_ONOFF_CTRL_TD1 BIT(6)
33 #define RV3029_ONOFF_CTRL_CLKINT BIT(7)
34 #define RV3029_IRQ_CTRL 0x01
35 #define RV3029_IRQ_CTRL_AIE BIT(0)
36 #define RV3029_IRQ_CTRL_TIE BIT(1)
37 #define RV3029_IRQ_CTRL_V1IE BIT(2)
38 #define RV3029_IRQ_CTRL_V2IE BIT(3)
39 #define RV3029_IRQ_CTRL_SRIE BIT(4)
40 #define RV3029_IRQ_FLAGS 0x02
41 #define RV3029_IRQ_FLAGS_AF BIT(0)
42 #define RV3029_IRQ_FLAGS_TF BIT(1)
43 #define RV3029_IRQ_FLAGS_V1IF BIT(2)
44 #define RV3029_IRQ_FLAGS_V2IF BIT(3)
45 #define RV3029_IRQ_FLAGS_SRF BIT(4)
46 #define RV3029_STATUS 0x03
47 #define RV3029_STATUS_VLOW1 BIT(2)
48 #define RV3029_STATUS_VLOW2 BIT(3)
49 #define RV3029_STATUS_SR BIT(4)
50 #define RV3029_STATUS_PON BIT(5)
51 #define RV3029_STATUS_EEBUSY BIT(7)
52 #define RV3029_RST_CTRL 0x04
53 #define RV3029_RST_CTRL_SYSR BIT(4)
54 #define RV3029_CONTROL_SECTION_LEN 0x05
55
56 /* watch section */
57 #define RV3029_W_SEC 0x08
58 #define RV3029_W_MINUTES 0x09
59 #define RV3029_W_HOURS 0x0A
60 #define RV3029_REG_HR_12_24 BIT(6) /* 24h/12h mode */
61 #define RV3029_REG_HR_PM BIT(5) /* PM/AM bit in 12h mode */
62 #define RV3029_W_DATE 0x0B
63 #define RV3029_W_DAYS 0x0C
64 #define RV3029_W_MONTHS 0x0D
65 #define RV3029_W_YEARS 0x0E
66 #define RV3029_WATCH_SECTION_LEN 0x07
67
68 /* alarm section */
69 #define RV3029_A_SC 0x10
70 #define RV3029_A_MN 0x11
71 #define RV3029_A_HR 0x12
72 #define RV3029_A_DT 0x13
73 #define RV3029_A_DW 0x14
74 #define RV3029_A_MO 0x15
75 #define RV3029_A_YR 0x16
76 #define RV3029_A_AE_X BIT(7)
77 #define RV3029_ALARM_SECTION_LEN 0x07
78
79 /* timer section */
80 #define RV3029_TIMER_LOW 0x18
81 #define RV3029_TIMER_HIGH 0x19
82
83 /* temperature section */
84 #define RV3029_TEMP_PAGE 0x20
85
86 /* eeprom data section */
87 #define RV3029_E2P_EEDATA1 0x28
88 #define RV3029_E2P_EEDATA2 0x29
89 #define RV3029_E2PDATA_SECTION_LEN 0x02
90
91 /* eeprom control section */
92 #define RV3029_CONTROL_E2P_EECTRL 0x30
93 #define RV3029_EECTRL_THP BIT(0) /* temp scan interval */
94 #define RV3029_EECTRL_THE BIT(1) /* thermometer enable */
95 #define RV3029_EECTRL_FD0 BIT(2) /* CLKOUT */
96 #define RV3029_EECTRL_FD1 BIT(3) /* CLKOUT */
97 #define RV3029_TRICKLE_1K BIT(4) /* 1.5K resistance */
98 #define RV3029_TRICKLE_5K BIT(5) /* 5K resistance */
99 #define RV3029_TRICKLE_20K BIT(6) /* 20K resistance */
100 #define RV3029_TRICKLE_80K BIT(7) /* 80K resistance */
101 #define RV3029_TRICKLE_MASK (RV3029_TRICKLE_1K |\
102 RV3029_TRICKLE_5K |\
103 RV3029_TRICKLE_20K |\
104 RV3029_TRICKLE_80K)
105 #define RV3029_TRICKLE_SHIFT 4
106 #define RV3029_CONTROL_E2P_XOFFS 0x31 /* XTAL offset */
107 #define RV3029_CONTROL_E2P_XOFFS_SIGN BIT(7) /* Sign: 1->pos, 0->neg */
108 #define RV3029_CONTROL_E2P_QCOEF 0x32 /* XTAL temp drift coef */
109 #define RV3029_CONTROL_E2P_TURNOVER 0x33 /* XTAL turnover temp (in *C) */
110 #define RV3029_CONTROL_E2P_TOV_MASK 0x3F /* XTAL turnover temp mask */
111
112 /* user ram section */
113 #define RV3029_RAM_PAGE 0x38
114 #define RV3029_RAM_SECTION_LEN 8
115
116 struct rv3029_data {
117 struct device *dev;
118 struct rtc_device *rtc;
119 struct regmap *regmap;
120 int irq;
121 };
122
rv3029_eeprom_busywait(struct rv3029_data * rv3029)123 static int rv3029_eeprom_busywait(struct rv3029_data *rv3029)
124 {
125 unsigned int sr;
126 int i, ret;
127
128 for (i = 100; i > 0; i--) {
129 ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
130 if (ret < 0)
131 break;
132 if (!(sr & RV3029_STATUS_EEBUSY))
133 break;
134 usleep_range(1000, 10000);
135 }
136 if (i <= 0) {
137 dev_err(rv3029->dev, "EEPROM busy wait timeout.\n");
138 return -ETIMEDOUT;
139 }
140
141 return ret;
142 }
143
rv3029_eeprom_exit(struct rv3029_data * rv3029)144 static int rv3029_eeprom_exit(struct rv3029_data *rv3029)
145 {
146 /* Re-enable eeprom refresh */
147 return regmap_update_bits(rv3029->regmap, RV3029_ONOFF_CTRL,
148 RV3029_ONOFF_CTRL_EERE,
149 RV3029_ONOFF_CTRL_EERE);
150 }
151
rv3029_eeprom_enter(struct rv3029_data * rv3029)152 static int rv3029_eeprom_enter(struct rv3029_data *rv3029)
153 {
154 unsigned int sr;
155 int ret;
156
157 /* Check whether we are in the allowed voltage range. */
158 ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
159 if (ret < 0)
160 return ret;
161 if (sr & RV3029_STATUS_VLOW2)
162 return -ENODEV;
163 if (sr & RV3029_STATUS_VLOW1) {
164 /* We clear the bits and retry once just in case
165 * we had a brown out in early startup.
166 */
167 ret = regmap_update_bits(rv3029->regmap, RV3029_STATUS,
168 RV3029_STATUS_VLOW1, 0);
169 if (ret < 0)
170 return ret;
171 usleep_range(1000, 10000);
172 ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
173 if (ret < 0)
174 return ret;
175 if (sr & RV3029_STATUS_VLOW1) {
176 dev_err(rv3029->dev,
177 "Supply voltage is too low to safely access the EEPROM.\n");
178 return -ENODEV;
179 }
180 }
181
182 /* Disable eeprom refresh. */
183 ret = regmap_update_bits(rv3029->regmap, RV3029_ONOFF_CTRL,
184 RV3029_ONOFF_CTRL_EERE, 0);
185 if (ret < 0)
186 return ret;
187
188 /* Wait for any previous eeprom accesses to finish. */
189 ret = rv3029_eeprom_busywait(rv3029);
190 if (ret < 0)
191 rv3029_eeprom_exit(rv3029);
192
193 return ret;
194 }
195
rv3029_eeprom_read(struct rv3029_data * rv3029,u8 reg,u8 buf[],size_t len)196 static int rv3029_eeprom_read(struct rv3029_data *rv3029, u8 reg,
197 u8 buf[], size_t len)
198 {
199 int ret, err;
200
201 err = rv3029_eeprom_enter(rv3029);
202 if (err < 0)
203 return err;
204
205 ret = regmap_bulk_read(rv3029->regmap, reg, buf, len);
206
207 err = rv3029_eeprom_exit(rv3029);
208 if (err < 0)
209 return err;
210
211 return ret;
212 }
213
rv3029_eeprom_write(struct rv3029_data * rv3029,u8 reg,u8 const buf[],size_t len)214 static int rv3029_eeprom_write(struct rv3029_data *rv3029, u8 reg,
215 u8 const buf[], size_t len)
216 {
217 unsigned int tmp;
218 int ret, err;
219 size_t i;
220
221 err = rv3029_eeprom_enter(rv3029);
222 if (err < 0)
223 return err;
224
225 for (i = 0; i < len; i++, reg++) {
226 ret = regmap_read(rv3029->regmap, reg, &tmp);
227 if (ret < 0)
228 break;
229 if (tmp != buf[i]) {
230 tmp = buf[i];
231 ret = regmap_write(rv3029->regmap, reg, tmp);
232 if (ret < 0)
233 break;
234 }
235 ret = rv3029_eeprom_busywait(rv3029);
236 if (ret < 0)
237 break;
238 }
239
240 err = rv3029_eeprom_exit(rv3029);
241 if (err < 0)
242 return err;
243
244 return ret;
245 }
246
rv3029_eeprom_update_bits(struct rv3029_data * rv3029,u8 reg,u8 mask,u8 set)247 static int rv3029_eeprom_update_bits(struct rv3029_data *rv3029,
248 u8 reg, u8 mask, u8 set)
249 {
250 u8 buf;
251 int ret;
252
253 ret = rv3029_eeprom_read(rv3029, reg, &buf, 1);
254 if (ret < 0)
255 return ret;
256 buf &= ~mask;
257 buf |= set & mask;
258 ret = rv3029_eeprom_write(rv3029, reg, &buf, 1);
259 if (ret < 0)
260 return ret;
261
262 return 0;
263 }
264
rv3029_handle_irq(int irq,void * dev_id)265 static irqreturn_t rv3029_handle_irq(int irq, void *dev_id)
266 {
267 struct device *dev = dev_id;
268 struct rv3029_data *rv3029 = dev_get_drvdata(dev);
269 unsigned int flags, controls;
270 unsigned long events = 0;
271 int ret;
272
273 rtc_lock(rv3029->rtc);
274
275 ret = regmap_read(rv3029->regmap, RV3029_IRQ_CTRL, &controls);
276 if (ret) {
277 dev_warn(dev, "Read IRQ Control Register error %d\n", ret);
278 rtc_unlock(rv3029->rtc);
279 return IRQ_NONE;
280 }
281
282 ret = regmap_read(rv3029->regmap, RV3029_IRQ_FLAGS, &flags);
283 if (ret) {
284 dev_warn(dev, "Read IRQ Flags Register error %d\n", ret);
285 rtc_unlock(rv3029->rtc);
286 return IRQ_NONE;
287 }
288
289 if (flags & RV3029_IRQ_FLAGS_AF) {
290 flags &= ~RV3029_IRQ_FLAGS_AF;
291 controls &= ~RV3029_IRQ_CTRL_AIE;
292 events |= RTC_AF;
293 }
294
295 if (events) {
296 rtc_update_irq(rv3029->rtc, 1, events);
297 regmap_write(rv3029->regmap, RV3029_IRQ_FLAGS, flags);
298 regmap_write(rv3029->regmap, RV3029_IRQ_CTRL, controls);
299 }
300 rtc_unlock(rv3029->rtc);
301
302 return IRQ_HANDLED;
303 }
304
rv3029_read_time(struct device * dev,struct rtc_time * tm)305 static int rv3029_read_time(struct device *dev, struct rtc_time *tm)
306 {
307 struct rv3029_data *rv3029 = dev_get_drvdata(dev);
308 unsigned int sr;
309 int ret;
310 u8 regs[RV3029_WATCH_SECTION_LEN] = { 0, };
311
312 ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
313 if (ret < 0)
314 return ret;
315
316 if (sr & (RV3029_STATUS_VLOW2 | RV3029_STATUS_PON))
317 return -EINVAL;
318
319 ret = regmap_bulk_read(rv3029->regmap, RV3029_W_SEC, regs,
320 RV3029_WATCH_SECTION_LEN);
321 if (ret < 0)
322 return ret;
323
324 tm->tm_sec = bcd2bin(regs[RV3029_W_SEC - RV3029_W_SEC]);
325 tm->tm_min = bcd2bin(regs[RV3029_W_MINUTES - RV3029_W_SEC]);
326
327 /* HR field has a more complex interpretation */
328 {
329 const u8 _hr = regs[RV3029_W_HOURS - RV3029_W_SEC];
330
331 if (_hr & RV3029_REG_HR_12_24) {
332 /* 12h format */
333 tm->tm_hour = bcd2bin(_hr & 0x1f);
334 if (_hr & RV3029_REG_HR_PM) /* PM flag set */
335 tm->tm_hour += 12;
336 } else /* 24h format */
337 tm->tm_hour = bcd2bin(_hr & 0x3f);
338 }
339
340 tm->tm_mday = bcd2bin(regs[RV3029_W_DATE - RV3029_W_SEC]);
341 tm->tm_mon = bcd2bin(regs[RV3029_W_MONTHS - RV3029_W_SEC]) - 1;
342 tm->tm_year = bcd2bin(regs[RV3029_W_YEARS - RV3029_W_SEC]) + 100;
343 tm->tm_wday = bcd2bin(regs[RV3029_W_DAYS - RV3029_W_SEC]) - 1;
344
345 return 0;
346 }
347
rv3029_read_alarm(struct device * dev,struct rtc_wkalrm * alarm)348 static int rv3029_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
349 {
350 struct rv3029_data *rv3029 = dev_get_drvdata(dev);
351 struct rtc_time *const tm = &alarm->time;
352 unsigned int controls, flags;
353 int ret;
354 u8 regs[8];
355
356 ret = regmap_bulk_read(rv3029->regmap, RV3029_A_SC, regs,
357 RV3029_ALARM_SECTION_LEN);
358 if (ret < 0)
359 return ret;
360
361 ret = regmap_read(rv3029->regmap, RV3029_IRQ_CTRL, &controls);
362 if (ret)
363 return ret;
364
365 ret = regmap_read(rv3029->regmap, RV3029_IRQ_FLAGS, &flags);
366 if (ret < 0)
367 return ret;
368
369 tm->tm_sec = bcd2bin(regs[RV3029_A_SC - RV3029_A_SC] & 0x7f);
370 tm->tm_min = bcd2bin(regs[RV3029_A_MN - RV3029_A_SC] & 0x7f);
371 tm->tm_hour = bcd2bin(regs[RV3029_A_HR - RV3029_A_SC] & 0x3f);
372 tm->tm_mday = bcd2bin(regs[RV3029_A_DT - RV3029_A_SC] & 0x3f);
373 tm->tm_mon = bcd2bin(regs[RV3029_A_MO - RV3029_A_SC] & 0x1f) - 1;
374 tm->tm_year = bcd2bin(regs[RV3029_A_YR - RV3029_A_SC] & 0x7f) + 100;
375 tm->tm_wday = bcd2bin(regs[RV3029_A_DW - RV3029_A_SC] & 0x07) - 1;
376
377 alarm->enabled = !!(controls & RV3029_IRQ_CTRL_AIE);
378 alarm->pending = (flags & RV3029_IRQ_FLAGS_AF) && alarm->enabled;
379
380 return 0;
381 }
382
rv3029_alarm_irq_enable(struct device * dev,unsigned int enable)383 static int rv3029_alarm_irq_enable(struct device *dev, unsigned int enable)
384 {
385 struct rv3029_data *rv3029 = dev_get_drvdata(dev);
386
387 return regmap_update_bits(rv3029->regmap, RV3029_IRQ_CTRL,
388 RV3029_IRQ_CTRL_AIE,
389 enable ? RV3029_IRQ_CTRL_AIE : 0);
390 }
391
rv3029_set_alarm(struct device * dev,struct rtc_wkalrm * alarm)392 static int rv3029_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
393 {
394 struct rv3029_data *rv3029 = dev_get_drvdata(dev);
395 struct rtc_time *const tm = &alarm->time;
396 int ret;
397 u8 regs[8];
398
399 /* Activate all the alarms with AE_x bit */
400 regs[RV3029_A_SC - RV3029_A_SC] = bin2bcd(tm->tm_sec) | RV3029_A_AE_X;
401 regs[RV3029_A_MN - RV3029_A_SC] = bin2bcd(tm->tm_min) | RV3029_A_AE_X;
402 regs[RV3029_A_HR - RV3029_A_SC] = (bin2bcd(tm->tm_hour) & 0x3f)
403 | RV3029_A_AE_X;
404 regs[RV3029_A_DT - RV3029_A_SC] = (bin2bcd(tm->tm_mday) & 0x3f)
405 | RV3029_A_AE_X;
406 regs[RV3029_A_MO - RV3029_A_SC] = (bin2bcd(tm->tm_mon + 1) & 0x1f)
407 | RV3029_A_AE_X;
408 regs[RV3029_A_DW - RV3029_A_SC] = (bin2bcd(tm->tm_wday + 1) & 0x7)
409 | RV3029_A_AE_X;
410 regs[RV3029_A_YR - RV3029_A_SC] = (bin2bcd(tm->tm_year - 100))
411 | RV3029_A_AE_X;
412
413 /* Write the alarm */
414 ret = regmap_bulk_write(rv3029->regmap, RV3029_A_SC, regs,
415 RV3029_ALARM_SECTION_LEN);
416 if (ret < 0)
417 return ret;
418
419 return rv3029_alarm_irq_enable(dev, alarm->enabled);
420 }
421
rv3029_set_time(struct device * dev,struct rtc_time * tm)422 static int rv3029_set_time(struct device *dev, struct rtc_time *tm)
423 {
424 struct rv3029_data *rv3029 = dev_get_drvdata(dev);
425 u8 regs[8];
426 int ret;
427
428 regs[RV3029_W_SEC - RV3029_W_SEC] = bin2bcd(tm->tm_sec);
429 regs[RV3029_W_MINUTES - RV3029_W_SEC] = bin2bcd(tm->tm_min);
430 regs[RV3029_W_HOURS - RV3029_W_SEC] = bin2bcd(tm->tm_hour);
431 regs[RV3029_W_DATE - RV3029_W_SEC] = bin2bcd(tm->tm_mday);
432 regs[RV3029_W_MONTHS - RV3029_W_SEC] = bin2bcd(tm->tm_mon + 1);
433 regs[RV3029_W_DAYS - RV3029_W_SEC] = bin2bcd(tm->tm_wday + 1) & 0x7;
434 regs[RV3029_W_YEARS - RV3029_W_SEC] = bin2bcd(tm->tm_year - 100);
435
436 ret = regmap_bulk_write(rv3029->regmap, RV3029_W_SEC, regs,
437 RV3029_WATCH_SECTION_LEN);
438 if (ret < 0)
439 return ret;
440
441 /* clear PON and VLOW2 bits */
442 return regmap_update_bits(rv3029->regmap, RV3029_STATUS,
443 RV3029_STATUS_PON | RV3029_STATUS_VLOW2, 0);
444 }
445
rv3029_ioctl(struct device * dev,unsigned int cmd,unsigned long arg)446 static int rv3029_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
447 {
448 struct rv3029_data *rv3029 = dev_get_drvdata(dev);
449 unsigned long vl = 0;
450 int sr, ret = 0;
451
452 switch (cmd) {
453 case RTC_VL_READ:
454 ret = regmap_read(rv3029->regmap, RV3029_STATUS, &sr);
455 if (ret < 0)
456 return ret;
457
458 if (sr & RV3029_STATUS_VLOW1)
459 vl = RTC_VL_ACCURACY_LOW;
460
461 if (sr & (RV3029_STATUS_VLOW2 | RV3029_STATUS_PON))
462 vl |= RTC_VL_DATA_INVALID;
463
464 return put_user(vl, (unsigned int __user *)arg);
465
466 case RTC_VL_CLR:
467 return regmap_update_bits(rv3029->regmap, RV3029_STATUS,
468 RV3029_STATUS_VLOW1, 0);
469
470 default:
471 return -ENOIOCTLCMD;
472 }
473 }
474
rv3029_nvram_write(void * priv,unsigned int offset,void * val,size_t bytes)475 static int rv3029_nvram_write(void *priv, unsigned int offset, void *val,
476 size_t bytes)
477 {
478 return regmap_bulk_write(priv, RV3029_RAM_PAGE + offset, val, bytes);
479 }
480
rv3029_nvram_read(void * priv,unsigned int offset,void * val,size_t bytes)481 static int rv3029_nvram_read(void *priv, unsigned int offset, void *val,
482 size_t bytes)
483 {
484 return regmap_bulk_read(priv, RV3029_RAM_PAGE + offset, val, bytes);
485 }
486
487 static const struct rv3029_trickle_tab_elem {
488 u32 r; /* resistance in ohms */
489 u8 conf; /* trickle config bits */
490 } rv3029_trickle_tab[] = {
491 {
492 .r = 1076,
493 .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
494 RV3029_TRICKLE_20K | RV3029_TRICKLE_80K,
495 }, {
496 .r = 1091,
497 .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
498 RV3029_TRICKLE_20K,
499 }, {
500 .r = 1137,
501 .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K |
502 RV3029_TRICKLE_80K,
503 }, {
504 .r = 1154,
505 .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_5K,
506 }, {
507 .r = 1371,
508 .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_20K |
509 RV3029_TRICKLE_80K,
510 }, {
511 .r = 1395,
512 .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_20K,
513 }, {
514 .r = 1472,
515 .conf = RV3029_TRICKLE_1K | RV3029_TRICKLE_80K,
516 }, {
517 .r = 1500,
518 .conf = RV3029_TRICKLE_1K,
519 }, {
520 .r = 3810,
521 .conf = RV3029_TRICKLE_5K | RV3029_TRICKLE_20K |
522 RV3029_TRICKLE_80K,
523 }, {
524 .r = 4000,
525 .conf = RV3029_TRICKLE_5K | RV3029_TRICKLE_20K,
526 }, {
527 .r = 4706,
528 .conf = RV3029_TRICKLE_5K | RV3029_TRICKLE_80K,
529 }, {
530 .r = 5000,
531 .conf = RV3029_TRICKLE_5K,
532 }, {
533 .r = 16000,
534 .conf = RV3029_TRICKLE_20K | RV3029_TRICKLE_80K,
535 }, {
536 .r = 20000,
537 .conf = RV3029_TRICKLE_20K,
538 }, {
539 .r = 80000,
540 .conf = RV3029_TRICKLE_80K,
541 },
542 };
543
rv3029_trickle_config(struct device * dev)544 static void rv3029_trickle_config(struct device *dev)
545 {
546 struct rv3029_data *rv3029 = dev_get_drvdata(dev);
547 struct device_node *of_node = dev->of_node;
548 const struct rv3029_trickle_tab_elem *elem;
549 int i, err;
550 u32 ohms;
551 u8 trickle_set_bits;
552
553 if (!of_node)
554 return;
555
556 /* Configure the trickle charger. */
557 err = of_property_read_u32(of_node, "trickle-resistor-ohms", &ohms);
558 if (err) {
559 /* Disable trickle charger. */
560 trickle_set_bits = 0;
561 } else {
562 /* Enable trickle charger. */
563 for (i = 0; i < ARRAY_SIZE(rv3029_trickle_tab); i++) {
564 elem = &rv3029_trickle_tab[i];
565 if (elem->r >= ohms)
566 break;
567 }
568 trickle_set_bits = elem->conf;
569 dev_info(dev,
570 "Trickle charger enabled at %d ohms resistance.\n",
571 elem->r);
572 }
573 err = rv3029_eeprom_update_bits(rv3029, RV3029_CONTROL_E2P_EECTRL,
574 RV3029_TRICKLE_MASK,
575 trickle_set_bits);
576 if (err < 0)
577 dev_err(dev, "Failed to update trickle charger config\n");
578 }
579
580 #ifdef CONFIG_RTC_DRV_RV3029_HWMON
581
rv3029_read_temp(struct rv3029_data * rv3029,int * temp_mC)582 static int rv3029_read_temp(struct rv3029_data *rv3029, int *temp_mC)
583 {
584 unsigned int temp;
585 int ret;
586
587 ret = regmap_read(rv3029->regmap, RV3029_TEMP_PAGE, &temp);
588 if (ret < 0)
589 return ret;
590
591 *temp_mC = ((int)temp - 60) * 1000;
592
593 return 0;
594 }
595
rv3029_hwmon_show_temp(struct device * dev,struct device_attribute * attr,char * buf)596 static ssize_t rv3029_hwmon_show_temp(struct device *dev,
597 struct device_attribute *attr,
598 char *buf)
599 {
600 struct rv3029_data *rv3029 = dev_get_drvdata(dev);
601 int ret, temp_mC;
602
603 ret = rv3029_read_temp(rv3029, &temp_mC);
604 if (ret < 0)
605 return ret;
606
607 return sprintf(buf, "%d\n", temp_mC);
608 }
609
rv3029_hwmon_set_update_interval(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)610 static ssize_t rv3029_hwmon_set_update_interval(struct device *dev,
611 struct device_attribute *attr,
612 const char *buf,
613 size_t count)
614 {
615 struct rv3029_data *rv3029 = dev_get_drvdata(dev);
616 unsigned int th_set_bits = 0;
617 unsigned long interval_ms;
618 int ret;
619
620 ret = kstrtoul(buf, 10, &interval_ms);
621 if (ret < 0)
622 return ret;
623
624 if (interval_ms != 0) {
625 th_set_bits |= RV3029_EECTRL_THE;
626 if (interval_ms >= 16000)
627 th_set_bits |= RV3029_EECTRL_THP;
628 }
629 ret = rv3029_eeprom_update_bits(rv3029, RV3029_CONTROL_E2P_EECTRL,
630 RV3029_EECTRL_THE | RV3029_EECTRL_THP,
631 th_set_bits);
632 if (ret < 0)
633 return ret;
634
635 return count;
636 }
637
rv3029_hwmon_show_update_interval(struct device * dev,struct device_attribute * attr,char * buf)638 static ssize_t rv3029_hwmon_show_update_interval(struct device *dev,
639 struct device_attribute *attr,
640 char *buf)
641 {
642 struct rv3029_data *rv3029 = dev_get_drvdata(dev);
643 int ret, interval_ms;
644 u8 eectrl;
645
646 ret = rv3029_eeprom_read(rv3029, RV3029_CONTROL_E2P_EECTRL,
647 &eectrl, 1);
648 if (ret < 0)
649 return ret;
650
651 if (eectrl & RV3029_EECTRL_THE) {
652 if (eectrl & RV3029_EECTRL_THP)
653 interval_ms = 16000;
654 else
655 interval_ms = 1000;
656 } else {
657 interval_ms = 0;
658 }
659
660 return sprintf(buf, "%d\n", interval_ms);
661 }
662
663 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, rv3029_hwmon_show_temp,
664 NULL, 0);
665 static SENSOR_DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO,
666 rv3029_hwmon_show_update_interval,
667 rv3029_hwmon_set_update_interval, 0);
668
669 static struct attribute *rv3029_hwmon_attrs[] = {
670 &sensor_dev_attr_temp1_input.dev_attr.attr,
671 &sensor_dev_attr_update_interval.dev_attr.attr,
672 NULL,
673 };
674 ATTRIBUTE_GROUPS(rv3029_hwmon);
675
rv3029_hwmon_register(struct device * dev,const char * name)676 static void rv3029_hwmon_register(struct device *dev, const char *name)
677 {
678 struct rv3029_data *rv3029 = dev_get_drvdata(dev);
679 struct device *hwmon_dev;
680
681 hwmon_dev = devm_hwmon_device_register_with_groups(dev, name, rv3029,
682 rv3029_hwmon_groups);
683 if (IS_ERR(hwmon_dev)) {
684 dev_warn(dev, "unable to register hwmon device %ld\n",
685 PTR_ERR(hwmon_dev));
686 }
687 }
688
689 #else /* CONFIG_RTC_DRV_RV3029_HWMON */
690
rv3029_hwmon_register(struct device * dev,const char * name)691 static void rv3029_hwmon_register(struct device *dev, const char *name)
692 {
693 }
694
695 #endif /* CONFIG_RTC_DRV_RV3029_HWMON */
696
697 static const struct rtc_class_ops rv3029_rtc_ops = {
698 .read_time = rv3029_read_time,
699 .set_time = rv3029_set_time,
700 .ioctl = rv3029_ioctl,
701 .read_alarm = rv3029_read_alarm,
702 .set_alarm = rv3029_set_alarm,
703 .alarm_irq_enable = rv3029_alarm_irq_enable,
704 };
705
rv3029_probe(struct device * dev,struct regmap * regmap,int irq,const char * name)706 static int rv3029_probe(struct device *dev, struct regmap *regmap, int irq,
707 const char *name)
708 {
709 struct rv3029_data *rv3029;
710 struct nvmem_config nvmem_cfg = {
711 .name = "rv3029_nvram",
712 .word_size = 1,
713 .stride = 1,
714 .size = RV3029_RAM_SECTION_LEN,
715 .type = NVMEM_TYPE_BATTERY_BACKED,
716 .reg_read = rv3029_nvram_read,
717 .reg_write = rv3029_nvram_write,
718 };
719 int rc = 0;
720
721 rv3029 = devm_kzalloc(dev, sizeof(*rv3029), GFP_KERNEL);
722 if (!rv3029)
723 return -ENOMEM;
724
725 rv3029->regmap = regmap;
726 rv3029->irq = irq;
727 rv3029->dev = dev;
728 dev_set_drvdata(dev, rv3029);
729
730 rv3029_trickle_config(dev);
731 rv3029_hwmon_register(dev, name);
732
733 rv3029->rtc = devm_rtc_allocate_device(dev);
734 if (IS_ERR(rv3029->rtc))
735 return PTR_ERR(rv3029->rtc);
736
737 if (rv3029->irq > 0) {
738 unsigned long irqflags = IRQF_TRIGGER_LOW;
739
740 if (dev_fwnode(dev))
741 irqflags = 0;
742
743 rc = devm_request_threaded_irq(dev, rv3029->irq,
744 NULL, rv3029_handle_irq,
745 irqflags | IRQF_ONESHOT,
746 "rv3029", dev);
747 if (rc) {
748 dev_warn(dev, "unable to request IRQ, alarms disabled\n");
749 rv3029->irq = 0;
750 }
751 }
752 if (!rv3029->irq)
753 clear_bit(RTC_FEATURE_ALARM, rv3029->rtc->features);
754
755 rv3029->rtc->ops = &rv3029_rtc_ops;
756 rv3029->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
757 rv3029->rtc->range_max = RTC_TIMESTAMP_END_2079;
758
759 rc = devm_rtc_register_device(rv3029->rtc);
760 if (rc)
761 return rc;
762
763 nvmem_cfg.priv = rv3029->regmap;
764 devm_rtc_nvmem_register(rv3029->rtc, &nvmem_cfg);
765
766 return 0;
767 }
768
769 static const struct regmap_range rv3029_holes_range[] = {
770 regmap_reg_range(0x05, 0x07),
771 regmap_reg_range(0x0f, 0x0f),
772 regmap_reg_range(0x17, 0x17),
773 regmap_reg_range(0x1a, 0x1f),
774 regmap_reg_range(0x21, 0x27),
775 regmap_reg_range(0x34, 0x37),
776 };
777
778 static const struct regmap_access_table rv3029_regs = {
779 .no_ranges = rv3029_holes_range,
780 .n_no_ranges = ARRAY_SIZE(rv3029_holes_range),
781 };
782
783 static const struct regmap_config config = {
784 .reg_bits = 8,
785 .val_bits = 8,
786 .rd_table = &rv3029_regs,
787 .wr_table = &rv3029_regs,
788 .max_register = 0x3f,
789 };
790
791 #if IS_ENABLED(CONFIG_I2C)
792
rv3029_i2c_probe(struct i2c_client * client)793 static int rv3029_i2c_probe(struct i2c_client *client)
794 {
795 struct regmap *regmap;
796 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK |
797 I2C_FUNC_SMBUS_BYTE)) {
798 dev_err(&client->dev, "Adapter does not support SMBUS_I2C_BLOCK or SMBUS_I2C_BYTE\n");
799 return -ENODEV;
800 }
801
802 regmap = devm_regmap_init_i2c(client, &config);
803 if (IS_ERR(regmap))
804 return PTR_ERR(regmap);
805
806 return rv3029_probe(&client->dev, regmap, client->irq, client->name);
807 }
808
809 static const struct i2c_device_id rv3029_id[] = {
810 { "rv3029" },
811 { "rv3029c2" },
812 { }
813 };
814 MODULE_DEVICE_TABLE(i2c, rv3029_id);
815
816 static const __maybe_unused struct of_device_id rv3029_of_match[] = {
817 { .compatible = "microcrystal,rv3029" },
818 { }
819 };
820 MODULE_DEVICE_TABLE(of, rv3029_of_match);
821
822 static struct i2c_driver rv3029_driver = {
823 .driver = {
824 .name = "rv3029",
825 .of_match_table = of_match_ptr(rv3029_of_match),
826 },
827 .probe = rv3029_i2c_probe,
828 .id_table = rv3029_id,
829 };
830
rv3029_register_driver(void)831 static int __init rv3029_register_driver(void)
832 {
833 return i2c_add_driver(&rv3029_driver);
834 }
835
rv3029_unregister_driver(void)836 static void rv3029_unregister_driver(void)
837 {
838 i2c_del_driver(&rv3029_driver);
839 }
840
841 #else
842
rv3029_register_driver(void)843 static int __init rv3029_register_driver(void)
844 {
845 return 0;
846 }
847
rv3029_unregister_driver(void)848 static void rv3029_unregister_driver(void)
849 {
850 }
851
852 #endif
853
854 #if IS_ENABLED(CONFIG_SPI_MASTER)
855
rv3049_probe(struct spi_device * spi)856 static int rv3049_probe(struct spi_device *spi)
857 {
858 struct regmap *regmap;
859
860 regmap = devm_regmap_init_spi(spi, &config);
861 if (IS_ERR(regmap))
862 return PTR_ERR(regmap);
863
864 return rv3029_probe(&spi->dev, regmap, spi->irq, "rv3049");
865 }
866
867 static struct spi_driver rv3049_driver = {
868 .driver = {
869 .name = "rv3049",
870 },
871 .probe = rv3049_probe,
872 };
873
rv3049_register_driver(void)874 static int __init rv3049_register_driver(void)
875 {
876 return spi_register_driver(&rv3049_driver);
877 }
878
rv3049_unregister_driver(void)879 static void __exit rv3049_unregister_driver(void)
880 {
881 spi_unregister_driver(&rv3049_driver);
882 }
883
884 #else
885
rv3049_register_driver(void)886 static int __init rv3049_register_driver(void)
887 {
888 return 0;
889 }
890
rv3049_unregister_driver(void)891 static void __exit rv3049_unregister_driver(void)
892 {
893 }
894
895 #endif
896
rv30x9_init(void)897 static int __init rv30x9_init(void)
898 {
899 int ret;
900
901 ret = rv3029_register_driver();
902 if (ret)
903 return ret;
904
905 ret = rv3049_register_driver();
906 if (ret)
907 rv3029_unregister_driver();
908
909 return ret;
910 }
module_init(rv30x9_init)911 module_init(rv30x9_init)
912
913 static void __exit rv30x9_exit(void)
914 {
915 rv3049_unregister_driver();
916 rv3029_unregister_driver();
917 }
918 module_exit(rv30x9_exit)
919
920 MODULE_AUTHOR("Gregory Hermant <gregory.hermant@calao-systems.com>");
921 MODULE_AUTHOR("Michael Buesch <m@bues.ch>");
922 MODULE_DESCRIPTION("Micro Crystal RV3029/RV3049 RTC driver");
923 MODULE_LICENSE("GPL");
924 MODULE_ALIAS("spi:rv3049");
925