xref: /linux/drivers/rtc/rtc-rv3028.c (revision 03c11eb3b16dc0058589751dfd91f254be2be613)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * RTC driver for the Micro Crystal RV3028
4  *
5  * Copyright (C) 2019 Micro Crystal SA
6  *
7  * Alexandre Belloni <alexandre.belloni@bootlin.com>
8  *
9  */
10 
11 #include <linux/clk-provider.h>
12 #include <linux/bcd.h>
13 #include <linux/bitfield.h>
14 #include <linux/bitops.h>
15 #include <linux/i2c.h>
16 #include <linux/interrupt.h>
17 #include <linux/kernel.h>
18 #include <linux/log2.h>
19 #include <linux/module.h>
20 #include <linux/of.h>
21 #include <linux/regmap.h>
22 #include <linux/rtc.h>
23 
24 #define RV3028_SEC			0x00
25 #define RV3028_MIN			0x01
26 #define RV3028_HOUR			0x02
27 #define RV3028_WDAY			0x03
28 #define RV3028_DAY			0x04
29 #define RV3028_MONTH			0x05
30 #define RV3028_YEAR			0x06
31 #define RV3028_ALARM_MIN		0x07
32 #define RV3028_ALARM_HOUR		0x08
33 #define RV3028_ALARM_DAY		0x09
34 #define RV3028_STATUS			0x0E
35 #define RV3028_CTRL1			0x0F
36 #define RV3028_CTRL2			0x10
37 #define RV3028_EVT_CTRL			0x13
38 #define RV3028_TS_COUNT			0x14
39 #define RV3028_TS_SEC			0x15
40 #define RV3028_RAM1			0x1F
41 #define RV3028_EEPROM_ADDR		0x25
42 #define RV3028_EEPROM_DATA		0x26
43 #define RV3028_EEPROM_CMD		0x27
44 #define RV3028_CLKOUT			0x35
45 #define RV3028_OFFSET			0x36
46 #define RV3028_BACKUP			0x37
47 
48 #define RV3028_STATUS_PORF		BIT(0)
49 #define RV3028_STATUS_EVF		BIT(1)
50 #define RV3028_STATUS_AF		BIT(2)
51 #define RV3028_STATUS_TF		BIT(3)
52 #define RV3028_STATUS_UF		BIT(4)
53 #define RV3028_STATUS_BSF		BIT(5)
54 #define RV3028_STATUS_CLKF		BIT(6)
55 #define RV3028_STATUS_EEBUSY		BIT(7)
56 
57 #define RV3028_CLKOUT_FD_MASK		GENMASK(2, 0)
58 #define RV3028_CLKOUT_PORIE		BIT(3)
59 #define RV3028_CLKOUT_CLKSY		BIT(6)
60 #define RV3028_CLKOUT_CLKOE		BIT(7)
61 
62 #define RV3028_CTRL1_EERD		BIT(3)
63 #define RV3028_CTRL1_WADA		BIT(5)
64 
65 #define RV3028_CTRL2_RESET		BIT(0)
66 #define RV3028_CTRL2_12_24		BIT(1)
67 #define RV3028_CTRL2_EIE		BIT(2)
68 #define RV3028_CTRL2_AIE		BIT(3)
69 #define RV3028_CTRL2_TIE		BIT(4)
70 #define RV3028_CTRL2_UIE		BIT(5)
71 #define RV3028_CTRL2_TSE		BIT(7)
72 
73 #define RV3028_EVT_CTRL_TSR		BIT(2)
74 
75 #define RV3028_EEPROM_CMD_UPDATE	0x11
76 #define RV3028_EEPROM_CMD_WRITE		0x21
77 #define RV3028_EEPROM_CMD_READ		0x22
78 
79 #define RV3028_EEBUSY_POLL		10000
80 #define RV3028_EEBUSY_TIMEOUT		100000
81 
82 #define RV3028_BACKUP_TCE		BIT(5)
83 #define RV3028_BACKUP_TCR_MASK		GENMASK(1,0)
84 #define RV3028_BACKUP_BSM		GENMASK(3,2)
85 
86 #define RV3028_BACKUP_BSM_DSM		0x1
87 #define RV3028_BACKUP_BSM_LSM		0x3
88 
89 #define OFFSET_STEP_PPT			953674
90 
91 enum rv3028_type {
92 	rv_3028,
93 };
94 
95 struct rv3028_data {
96 	struct regmap *regmap;
97 	struct rtc_device *rtc;
98 	enum rv3028_type type;
99 #ifdef CONFIG_COMMON_CLK
100 	struct clk_hw clkout_hw;
101 #endif
102 };
103 
104 static u16 rv3028_trickle_resistors[] = {3000, 5000, 9000, 15000};
105 
timestamp0_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)106 static ssize_t timestamp0_store(struct device *dev,
107 				struct device_attribute *attr,
108 				const char *buf, size_t count)
109 {
110 	struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
111 
112 	regmap_update_bits(rv3028->regmap, RV3028_EVT_CTRL, RV3028_EVT_CTRL_TSR,
113 			   RV3028_EVT_CTRL_TSR);
114 
115 	return count;
116 };
117 
timestamp0_show(struct device * dev,struct device_attribute * attr,char * buf)118 static ssize_t timestamp0_show(struct device *dev,
119 			       struct device_attribute *attr, char *buf)
120 {
121 	struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
122 	struct rtc_time tm;
123 	int ret, count;
124 	u8 date[6];
125 
126 	ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count);
127 	if (ret)
128 		return ret;
129 
130 	if (!count)
131 		return 0;
132 
133 	ret = regmap_bulk_read(rv3028->regmap, RV3028_TS_SEC, date,
134 			       sizeof(date));
135 	if (ret)
136 		return ret;
137 
138 	tm.tm_sec = bcd2bin(date[0]);
139 	tm.tm_min = bcd2bin(date[1]);
140 	tm.tm_hour = bcd2bin(date[2]);
141 	tm.tm_mday = bcd2bin(date[3]);
142 	tm.tm_mon = bcd2bin(date[4]) - 1;
143 	tm.tm_year = bcd2bin(date[5]) + 100;
144 
145 	ret = rtc_valid_tm(&tm);
146 	if (ret)
147 		return ret;
148 
149 	return sprintf(buf, "%llu\n",
150 		       (unsigned long long)rtc_tm_to_time64(&tm));
151 };
152 
153 static DEVICE_ATTR_RW(timestamp0);
154 
timestamp0_count_show(struct device * dev,struct device_attribute * attr,char * buf)155 static ssize_t timestamp0_count_show(struct device *dev,
156 				     struct device_attribute *attr, char *buf)
157 {
158 	struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent);
159 	int ret, count;
160 
161 	ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count);
162 	if (ret)
163 		return ret;
164 
165 	return sprintf(buf, "%u\n", count);
166 };
167 
168 static DEVICE_ATTR_RO(timestamp0_count);
169 
170 static struct attribute *rv3028_attrs[] = {
171 	&dev_attr_timestamp0.attr,
172 	&dev_attr_timestamp0_count.attr,
173 	NULL
174 };
175 
176 static const struct attribute_group rv3028_attr_group = {
177 	.attrs	= rv3028_attrs,
178 };
179 
rv3028_exit_eerd(struct rv3028_data * rv3028,u32 eerd)180 static int rv3028_exit_eerd(struct rv3028_data *rv3028, u32 eerd)
181 {
182 	if (eerd)
183 		return 0;
184 
185 	return regmap_update_bits(rv3028->regmap, RV3028_CTRL1, RV3028_CTRL1_EERD, 0);
186 }
187 
rv3028_enter_eerd(struct rv3028_data * rv3028,u32 * eerd)188 static int rv3028_enter_eerd(struct rv3028_data *rv3028, u32 *eerd)
189 {
190 	u32 ctrl1, status;
191 	int ret;
192 
193 	ret = regmap_read(rv3028->regmap, RV3028_CTRL1, &ctrl1);
194 	if (ret)
195 		return ret;
196 
197 	*eerd = ctrl1 & RV3028_CTRL1_EERD;
198 	if (*eerd)
199 		return 0;
200 
201 	ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL1,
202 				 RV3028_CTRL1_EERD, RV3028_CTRL1_EERD);
203 	if (ret)
204 		return ret;
205 
206 	ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
207 				       !(status & RV3028_STATUS_EEBUSY),
208 				       RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
209 	if (ret) {
210 		rv3028_exit_eerd(rv3028, *eerd);
211 
212 		return ret;
213 	}
214 
215 	return 0;
216 }
217 
rv3028_update_eeprom(struct rv3028_data * rv3028,u32 eerd)218 static int rv3028_update_eeprom(struct rv3028_data *rv3028, u32 eerd)
219 {
220 	u32 status;
221 	int ret;
222 
223 	ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0);
224 	if (ret)
225 		goto exit_eerd;
226 
227 	ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, RV3028_EEPROM_CMD_UPDATE);
228 	if (ret)
229 		goto exit_eerd;
230 
231 	usleep_range(63000, RV3028_EEBUSY_TIMEOUT);
232 
233 	ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
234 				       !(status & RV3028_STATUS_EEBUSY),
235 				       RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
236 
237 exit_eerd:
238 	rv3028_exit_eerd(rv3028, eerd);
239 
240 	return ret;
241 }
242 
rv3028_update_cfg(struct rv3028_data * rv3028,unsigned int reg,unsigned int mask,unsigned int val)243 static int rv3028_update_cfg(struct rv3028_data *rv3028, unsigned int reg,
244 			     unsigned int mask, unsigned int val)
245 {
246 	u32 eerd;
247 	int ret;
248 
249 	ret = rv3028_enter_eerd(rv3028, &eerd);
250 	if (ret)
251 		return ret;
252 
253 	ret = regmap_update_bits(rv3028->regmap, reg, mask, val);
254 	if (ret) {
255 		rv3028_exit_eerd(rv3028, eerd);
256 		return ret;
257 	}
258 
259 	return rv3028_update_eeprom(rv3028, eerd);
260 }
261 
rv3028_handle_irq(int irq,void * dev_id)262 static irqreturn_t rv3028_handle_irq(int irq, void *dev_id)
263 {
264 	struct rv3028_data *rv3028 = dev_id;
265 	unsigned long events = 0;
266 	u32 status = 0, ctrl = 0;
267 
268 	if (regmap_read(rv3028->regmap, RV3028_STATUS, &status) < 0 ||
269 	   status == 0) {
270 		return IRQ_NONE;
271 	}
272 
273 	status &= ~RV3028_STATUS_PORF;
274 
275 	if (status & RV3028_STATUS_TF) {
276 		status |= RV3028_STATUS_TF;
277 		ctrl |= RV3028_CTRL2_TIE;
278 		events |= RTC_PF;
279 	}
280 
281 	if (status & RV3028_STATUS_AF) {
282 		status |= RV3028_STATUS_AF;
283 		ctrl |= RV3028_CTRL2_AIE;
284 		events |= RTC_AF;
285 	}
286 
287 	if (status & RV3028_STATUS_UF) {
288 		status |= RV3028_STATUS_UF;
289 		ctrl |= RV3028_CTRL2_UIE;
290 		events |= RTC_UF;
291 	}
292 
293 	if (events) {
294 		rtc_update_irq(rv3028->rtc, 1, events);
295 		regmap_update_bits(rv3028->regmap, RV3028_STATUS, status, 0);
296 		regmap_update_bits(rv3028->regmap, RV3028_CTRL2, ctrl, 0);
297 	}
298 
299 	if (status & RV3028_STATUS_EVF) {
300 		sysfs_notify(&rv3028->rtc->dev.kobj, NULL,
301 			     dev_attr_timestamp0.attr.name);
302 		dev_warn(&rv3028->rtc->dev, "event detected");
303 	}
304 
305 	return IRQ_HANDLED;
306 }
307 
rv3028_get_time(struct device * dev,struct rtc_time * tm)308 static int rv3028_get_time(struct device *dev, struct rtc_time *tm)
309 {
310 	struct rv3028_data *rv3028 = dev_get_drvdata(dev);
311 	u8 date[7];
312 	int ret, status;
313 
314 	ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
315 	if (ret < 0)
316 		return ret;
317 
318 	if (status & RV3028_STATUS_PORF)
319 		return -EINVAL;
320 
321 	ret = regmap_bulk_read(rv3028->regmap, RV3028_SEC, date, sizeof(date));
322 	if (ret)
323 		return ret;
324 
325 	tm->tm_sec  = bcd2bin(date[RV3028_SEC] & 0x7f);
326 	tm->tm_min  = bcd2bin(date[RV3028_MIN] & 0x7f);
327 	tm->tm_hour = bcd2bin(date[RV3028_HOUR] & 0x3f);
328 	tm->tm_wday = date[RV3028_WDAY] & 0x7f;
329 	tm->tm_mday = bcd2bin(date[RV3028_DAY] & 0x3f);
330 	tm->tm_mon  = bcd2bin(date[RV3028_MONTH] & 0x1f) - 1;
331 	tm->tm_year = bcd2bin(date[RV3028_YEAR]) + 100;
332 
333 	return 0;
334 }
335 
rv3028_set_time(struct device * dev,struct rtc_time * tm)336 static int rv3028_set_time(struct device *dev, struct rtc_time *tm)
337 {
338 	struct rv3028_data *rv3028 = dev_get_drvdata(dev);
339 	u8 date[7];
340 	int ret;
341 
342 	date[RV3028_SEC]   = bin2bcd(tm->tm_sec);
343 	date[RV3028_MIN]   = bin2bcd(tm->tm_min);
344 	date[RV3028_HOUR]  = bin2bcd(tm->tm_hour);
345 	date[RV3028_WDAY]  = tm->tm_wday;
346 	date[RV3028_DAY]   = bin2bcd(tm->tm_mday);
347 	date[RV3028_MONTH] = bin2bcd(tm->tm_mon + 1);
348 	date[RV3028_YEAR]  = bin2bcd(tm->tm_year - 100);
349 
350 	/*
351 	 * Writing to the Seconds register has the same effect as setting RESET
352 	 * bit to 1
353 	 */
354 	ret = regmap_bulk_write(rv3028->regmap, RV3028_SEC, date,
355 				sizeof(date));
356 	if (ret)
357 		return ret;
358 
359 	ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
360 				 RV3028_STATUS_PORF, 0);
361 
362 	return ret;
363 }
364 
rv3028_get_alarm(struct device * dev,struct rtc_wkalrm * alrm)365 static int rv3028_get_alarm(struct device *dev, struct rtc_wkalrm *alrm)
366 {
367 	struct rv3028_data *rv3028 = dev_get_drvdata(dev);
368 	u8 alarmvals[3];
369 	int status, ctrl, ret;
370 
371 	ret = regmap_bulk_read(rv3028->regmap, RV3028_ALARM_MIN, alarmvals,
372 			       sizeof(alarmvals));
373 	if (ret)
374 		return ret;
375 
376 	ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
377 	if (ret < 0)
378 		return ret;
379 
380 	ret = regmap_read(rv3028->regmap, RV3028_CTRL2, &ctrl);
381 	if (ret < 0)
382 		return ret;
383 
384 	alrm->time.tm_sec  = 0;
385 	alrm->time.tm_min  = bcd2bin(alarmvals[0] & 0x7f);
386 	alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f);
387 	alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f);
388 
389 	alrm->enabled = !!(ctrl & RV3028_CTRL2_AIE);
390 	alrm->pending = (status & RV3028_STATUS_AF) && alrm->enabled;
391 
392 	return 0;
393 }
394 
rv3028_set_alarm(struct device * dev,struct rtc_wkalrm * alrm)395 static int rv3028_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
396 {
397 	struct rv3028_data *rv3028 = dev_get_drvdata(dev);
398 	u8 alarmvals[3];
399 	u8 ctrl = 0;
400 	int ret;
401 
402 	/* The alarm has no seconds, round up to nearest minute */
403 	if (alrm->time.tm_sec) {
404 		time64_t alarm_time = rtc_tm_to_time64(&alrm->time);
405 
406 		alarm_time += 60 - alrm->time.tm_sec;
407 		rtc_time64_to_tm(alarm_time, &alrm->time);
408 	}
409 
410 	ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
411 				 RV3028_CTRL2_AIE | RV3028_CTRL2_UIE, 0);
412 	if (ret)
413 		return ret;
414 
415 	alarmvals[0] = bin2bcd(alrm->time.tm_min);
416 	alarmvals[1] = bin2bcd(alrm->time.tm_hour);
417 	alarmvals[2] = bin2bcd(alrm->time.tm_mday);
418 
419 	ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
420 				 RV3028_STATUS_AF, 0);
421 	if (ret)
422 		return ret;
423 
424 	ret = regmap_bulk_write(rv3028->regmap, RV3028_ALARM_MIN, alarmvals,
425 				sizeof(alarmvals));
426 	if (ret)
427 		return ret;
428 
429 	if (alrm->enabled) {
430 		if (rv3028->rtc->uie_rtctimer.enabled)
431 			ctrl |= RV3028_CTRL2_UIE;
432 		if (rv3028->rtc->aie_timer.enabled)
433 			ctrl |= RV3028_CTRL2_AIE;
434 	}
435 
436 	ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
437 				 RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl);
438 
439 	return ret;
440 }
441 
rv3028_alarm_irq_enable(struct device * dev,unsigned int enabled)442 static int rv3028_alarm_irq_enable(struct device *dev, unsigned int enabled)
443 {
444 	struct rv3028_data *rv3028 = dev_get_drvdata(dev);
445 	int ctrl = 0, ret;
446 
447 	if (enabled) {
448 		if (rv3028->rtc->uie_rtctimer.enabled)
449 			ctrl |= RV3028_CTRL2_UIE;
450 		if (rv3028->rtc->aie_timer.enabled)
451 			ctrl |= RV3028_CTRL2_AIE;
452 	}
453 
454 	ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
455 				 RV3028_STATUS_AF | RV3028_STATUS_UF, 0);
456 	if (ret)
457 		return ret;
458 
459 	ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
460 				 RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl);
461 	if (ret)
462 		return ret;
463 
464 	return 0;
465 }
466 
rv3028_read_offset(struct device * dev,long * offset)467 static int rv3028_read_offset(struct device *dev, long *offset)
468 {
469 	struct rv3028_data *rv3028 = dev_get_drvdata(dev);
470 	int ret, value, steps;
471 
472 	ret = regmap_read(rv3028->regmap, RV3028_OFFSET, &value);
473 	if (ret < 0)
474 		return ret;
475 
476 	steps = sign_extend32(value << 1, 8);
477 
478 	ret = regmap_read(rv3028->regmap, RV3028_BACKUP, &value);
479 	if (ret < 0)
480 		return ret;
481 
482 	steps += value >> 7;
483 
484 	*offset = DIV_ROUND_CLOSEST(steps * OFFSET_STEP_PPT, 1000);
485 
486 	return 0;
487 }
488 
rv3028_set_offset(struct device * dev,long offset)489 static int rv3028_set_offset(struct device *dev, long offset)
490 {
491 	struct rv3028_data *rv3028 = dev_get_drvdata(dev);
492 	u32 eerd;
493 	int ret;
494 
495 	offset = clamp(offset, -244141L, 243187L) * 1000;
496 	offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT);
497 
498 	ret = rv3028_enter_eerd(rv3028, &eerd);
499 	if (ret)
500 		return ret;
501 
502 	ret = regmap_write(rv3028->regmap, RV3028_OFFSET, offset >> 1);
503 	if (ret < 0)
504 		goto exit_eerd;
505 
506 	ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7),
507 				 offset << 7);
508 	if (ret < 0)
509 		goto exit_eerd;
510 
511 	return rv3028_update_eeprom(rv3028, eerd);
512 
513 exit_eerd:
514 	rv3028_exit_eerd(rv3028, eerd);
515 
516 	return ret;
517 
518 }
519 
rv3028_param_get(struct device * dev,struct rtc_param * param)520 static int rv3028_param_get(struct device *dev, struct rtc_param *param)
521 {
522 	struct rv3028_data *rv3028 = dev_get_drvdata(dev);
523 	int ret;
524 	u32 value;
525 
526 	switch(param->param) {
527 	case RTC_PARAM_BACKUP_SWITCH_MODE:
528 		ret = regmap_read(rv3028->regmap, RV3028_BACKUP, &value);
529 		if (ret < 0)
530 			return ret;
531 
532 		value = FIELD_GET(RV3028_BACKUP_BSM, value);
533 
534 		switch(value) {
535 		case RV3028_BACKUP_BSM_DSM:
536 			param->uvalue = RTC_BSM_DIRECT;
537 			break;
538 		case RV3028_BACKUP_BSM_LSM:
539 			param->uvalue = RTC_BSM_LEVEL;
540 			break;
541 		default:
542 			param->uvalue = RTC_BSM_DISABLED;
543 		}
544 		break;
545 
546 	default:
547 		return -EINVAL;
548 	}
549 
550 	return 0;
551 }
552 
rv3028_param_set(struct device * dev,struct rtc_param * param)553 static int rv3028_param_set(struct device *dev, struct rtc_param *param)
554 {
555 	struct rv3028_data *rv3028 = dev_get_drvdata(dev);
556 	u8 mode;
557 
558 	switch(param->param) {
559 	case RTC_PARAM_BACKUP_SWITCH_MODE:
560 		switch (param->uvalue) {
561 		case RTC_BSM_DISABLED:
562 			mode = 0;
563 			break;
564 		case RTC_BSM_DIRECT:
565 			mode = RV3028_BACKUP_BSM_DSM;
566 			break;
567 		case RTC_BSM_LEVEL:
568 			mode = RV3028_BACKUP_BSM_LSM;
569 			break;
570 		default:
571 			return -EINVAL;
572 		}
573 
574 		return rv3028_update_cfg(rv3028, RV3028_BACKUP, RV3028_BACKUP_BSM,
575 					 FIELD_PREP(RV3028_BACKUP_BSM, mode));
576 
577 	default:
578 		return -EINVAL;
579 	}
580 
581 	return 0;
582 }
583 
rv3028_ioctl(struct device * dev,unsigned int cmd,unsigned long arg)584 static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
585 {
586 	struct rv3028_data *rv3028 = dev_get_drvdata(dev);
587 	int status, ret = 0;
588 
589 	switch (cmd) {
590 	case RTC_VL_READ:
591 		ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
592 		if (ret < 0)
593 			return ret;
594 
595 		status = status & RV3028_STATUS_PORF ? RTC_VL_DATA_INVALID : 0;
596 		return put_user(status, (unsigned int __user *)arg);
597 
598 	default:
599 		return -ENOIOCTLCMD;
600 	}
601 }
602 
rv3028_nvram_write(void * priv,unsigned int offset,void * val,size_t bytes)603 static int rv3028_nvram_write(void *priv, unsigned int offset, void *val,
604 			      size_t bytes)
605 {
606 	return regmap_bulk_write(priv, RV3028_RAM1 + offset, val, bytes);
607 }
608 
rv3028_nvram_read(void * priv,unsigned int offset,void * val,size_t bytes)609 static int rv3028_nvram_read(void *priv, unsigned int offset, void *val,
610 			     size_t bytes)
611 {
612 	return regmap_bulk_read(priv, RV3028_RAM1 + offset, val, bytes);
613 }
614 
rv3028_eeprom_write(void * priv,unsigned int offset,void * val,size_t bytes)615 static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val,
616 			       size_t bytes)
617 {
618 	struct rv3028_data *rv3028 = priv;
619 	u32 status, eerd;
620 	int i, ret;
621 	u8 *buf = val;
622 
623 	ret = rv3028_enter_eerd(rv3028, &eerd);
624 	if (ret)
625 		return ret;
626 
627 	for (i = 0; i < bytes; i++) {
628 		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_ADDR, offset + i);
629 		if (ret)
630 			goto restore_eerd;
631 
632 		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_DATA, buf[i]);
633 		if (ret)
634 			goto restore_eerd;
635 
636 		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0);
637 		if (ret)
638 			goto restore_eerd;
639 
640 		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD,
641 				   RV3028_EEPROM_CMD_WRITE);
642 		if (ret)
643 			goto restore_eerd;
644 
645 		usleep_range(RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT);
646 
647 		ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
648 					       !(status & RV3028_STATUS_EEBUSY),
649 					       RV3028_EEBUSY_POLL,
650 					       RV3028_EEBUSY_TIMEOUT);
651 		if (ret)
652 			goto restore_eerd;
653 	}
654 
655 restore_eerd:
656 	rv3028_exit_eerd(rv3028, eerd);
657 
658 	return ret;
659 }
660 
rv3028_eeprom_read(void * priv,unsigned int offset,void * val,size_t bytes)661 static int rv3028_eeprom_read(void *priv, unsigned int offset, void *val,
662 			      size_t bytes)
663 {
664 	struct rv3028_data *rv3028 = priv;
665 	u32 status, eerd, data;
666 	int i, ret;
667 	u8 *buf = val;
668 
669 	ret = rv3028_enter_eerd(rv3028, &eerd);
670 	if (ret)
671 		return ret;
672 
673 	for (i = 0; i < bytes; i++) {
674 		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_ADDR, offset + i);
675 		if (ret)
676 			goto restore_eerd;
677 
678 		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0);
679 		if (ret)
680 			goto restore_eerd;
681 
682 		ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD,
683 				   RV3028_EEPROM_CMD_READ);
684 		if (ret)
685 			goto restore_eerd;
686 
687 		ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status,
688 					       !(status & RV3028_STATUS_EEBUSY),
689 					       RV3028_EEBUSY_POLL,
690 					       RV3028_EEBUSY_TIMEOUT);
691 		if (ret)
692 			goto restore_eerd;
693 
694 		ret = regmap_read(rv3028->regmap, RV3028_EEPROM_DATA, &data);
695 		if (ret)
696 			goto restore_eerd;
697 		buf[i] = data;
698 	}
699 
700 restore_eerd:
701 	rv3028_exit_eerd(rv3028, eerd);
702 
703 	return ret;
704 }
705 
706 #ifdef CONFIG_COMMON_CLK
707 #define clkout_hw_to_rv3028(hw) container_of(hw, struct rv3028_data, clkout_hw)
708 
709 static int clkout_rates[] = {
710 	32768,
711 	8192,
712 	1024,
713 	64,
714 	32,
715 	1,
716 };
717 
rv3028_clkout_recalc_rate(struct clk_hw * hw,unsigned long parent_rate)718 static unsigned long rv3028_clkout_recalc_rate(struct clk_hw *hw,
719 					       unsigned long parent_rate)
720 {
721 	int clkout, ret;
722 	struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
723 
724 	ret = regmap_read(rv3028->regmap, RV3028_CLKOUT, &clkout);
725 	if (ret < 0)
726 		return 0;
727 
728 	clkout &= RV3028_CLKOUT_FD_MASK;
729 	return clkout_rates[clkout];
730 }
731 
rv3028_clkout_round_rate(struct clk_hw * hw,unsigned long rate,unsigned long * prate)732 static long rv3028_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
733 				     unsigned long *prate)
734 {
735 	int i;
736 
737 	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
738 		if (clkout_rates[i] <= rate)
739 			return clkout_rates[i];
740 
741 	return 0;
742 }
743 
rv3028_clkout_set_rate(struct clk_hw * hw,unsigned long rate,unsigned long parent_rate)744 static int rv3028_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
745 				  unsigned long parent_rate)
746 {
747 	int i, ret;
748 	u32 enabled;
749 	struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
750 
751 	ret = regmap_read(rv3028->regmap, RV3028_CLKOUT, &enabled);
752 	if (ret < 0)
753 		return ret;
754 
755 	ret = regmap_write(rv3028->regmap, RV3028_CLKOUT, 0x0);
756 	if (ret < 0)
757 		return ret;
758 
759 	enabled &= RV3028_CLKOUT_CLKOE;
760 
761 	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
762 		if (clkout_rates[i] == rate)
763 			return rv3028_update_cfg(rv3028, RV3028_CLKOUT, 0xff,
764 						 RV3028_CLKOUT_CLKSY | enabled | i);
765 
766 	return -EINVAL;
767 }
768 
rv3028_clkout_prepare(struct clk_hw * hw)769 static int rv3028_clkout_prepare(struct clk_hw *hw)
770 {
771 	struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
772 
773 	return regmap_write(rv3028->regmap, RV3028_CLKOUT,
774 			    RV3028_CLKOUT_CLKSY | RV3028_CLKOUT_CLKOE);
775 }
776 
rv3028_clkout_unprepare(struct clk_hw * hw)777 static void rv3028_clkout_unprepare(struct clk_hw *hw)
778 {
779 	struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
780 
781 	regmap_write(rv3028->regmap, RV3028_CLKOUT, 0x0);
782 	regmap_update_bits(rv3028->regmap, RV3028_STATUS,
783 			   RV3028_STATUS_CLKF, 0);
784 }
785 
rv3028_clkout_is_prepared(struct clk_hw * hw)786 static int rv3028_clkout_is_prepared(struct clk_hw *hw)
787 {
788 	int clkout, ret;
789 	struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw);
790 
791 	ret = regmap_read(rv3028->regmap, RV3028_CLKOUT, &clkout);
792 	if (ret < 0)
793 		return ret;
794 
795 	return !!(clkout & RV3028_CLKOUT_CLKOE);
796 }
797 
798 static const struct clk_ops rv3028_clkout_ops = {
799 	.prepare = rv3028_clkout_prepare,
800 	.unprepare = rv3028_clkout_unprepare,
801 	.is_prepared = rv3028_clkout_is_prepared,
802 	.recalc_rate = rv3028_clkout_recalc_rate,
803 	.round_rate = rv3028_clkout_round_rate,
804 	.set_rate = rv3028_clkout_set_rate,
805 };
806 
rv3028_clkout_register_clk(struct rv3028_data * rv3028,struct i2c_client * client)807 static int rv3028_clkout_register_clk(struct rv3028_data *rv3028,
808 				      struct i2c_client *client)
809 {
810 	int ret;
811 	struct clk *clk;
812 	struct clk_init_data init;
813 	struct device_node *node = client->dev.of_node;
814 
815 	ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS,
816 				 RV3028_STATUS_CLKF, 0);
817 	if (ret < 0)
818 		return ret;
819 
820 	init.name = "rv3028-clkout";
821 	init.ops = &rv3028_clkout_ops;
822 	init.flags = 0;
823 	init.parent_names = NULL;
824 	init.num_parents = 0;
825 	rv3028->clkout_hw.init = &init;
826 
827 	/* optional override of the clockname */
828 	of_property_read_string(node, "clock-output-names", &init.name);
829 
830 	/* register the clock */
831 	clk = devm_clk_register(&client->dev, &rv3028->clkout_hw);
832 	if (!IS_ERR(clk))
833 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
834 
835 	return 0;
836 }
837 #endif
838 
839 static const struct rtc_class_ops rv3028_rtc_ops = {
840 	.read_time = rv3028_get_time,
841 	.set_time = rv3028_set_time,
842 	.read_alarm = rv3028_get_alarm,
843 	.set_alarm = rv3028_set_alarm,
844 	.alarm_irq_enable = rv3028_alarm_irq_enable,
845 	.read_offset = rv3028_read_offset,
846 	.set_offset = rv3028_set_offset,
847 	.ioctl = rv3028_ioctl,
848 	.param_get = rv3028_param_get,
849 	.param_set = rv3028_param_set,
850 };
851 
852 static const struct regmap_config regmap_config = {
853         .reg_bits = 8,
854         .val_bits = 8,
855         .max_register = 0x37,
856 };
857 
rv3028_set_trickle_charger(struct rv3028_data * rv3028,struct i2c_client * client)858 static u8 rv3028_set_trickle_charger(struct rv3028_data *rv3028,
859 				     struct i2c_client *client)
860 {
861 	int ret, val_old, val;
862 	u32 ohms, chargeable;
863 
864 	ret = regmap_read(rv3028->regmap, RV3028_BACKUP, &val_old);
865 	if (ret < 0)
866 		return ret;
867 
868 	/* mask out only trickle charger bits */
869 	val_old = val_old & (RV3028_BACKUP_TCE | RV3028_BACKUP_TCR_MASK);
870 	val = val_old;
871 
872 	/* setup trickle charger */
873 	if (!device_property_read_u32(&client->dev, "trickle-resistor-ohms",
874 				      &ohms)) {
875 		int i;
876 
877 		for (i = 0; i < ARRAY_SIZE(rv3028_trickle_resistors); i++)
878 			if (ohms == rv3028_trickle_resistors[i])
879 				break;
880 
881 		if (i < ARRAY_SIZE(rv3028_trickle_resistors)) {
882 			/* enable trickle charger and its resistor */
883 			val = RV3028_BACKUP_TCE | i;
884 		} else {
885 			dev_warn(&client->dev, "invalid trickle resistor value\n");
886 		}
887 	}
888 
889 	if (!device_property_read_u32(&client->dev, "aux-voltage-chargeable",
890 				      &chargeable)) {
891 		switch (chargeable) {
892 		case 0:
893 			val &= ~RV3028_BACKUP_TCE;
894 			break;
895 		case 1:
896 			val |= RV3028_BACKUP_TCE;
897 			break;
898 		default:
899 			dev_warn(&client->dev,
900 				 "unsupported aux-voltage-chargeable value\n");
901 			break;
902 		}
903 	}
904 
905 	/* only update EEPROM if changes are necessary */
906 	if (val_old != val) {
907 		ret = rv3028_update_cfg(rv3028, RV3028_BACKUP, RV3028_BACKUP_TCE |
908 						RV3028_BACKUP_TCR_MASK, val);
909 		if (ret)
910 			return ret;
911 	}
912 
913 	return ret;
914 }
915 
rv3028_probe(struct i2c_client * client)916 static int rv3028_probe(struct i2c_client *client)
917 {
918 	struct rv3028_data *rv3028;
919 	int ret, status;
920 	struct nvmem_config nvmem_cfg = {
921 		.name = "rv3028_nvram",
922 		.word_size = 1,
923 		.stride = 1,
924 		.size = 2,
925 		.type = NVMEM_TYPE_BATTERY_BACKED,
926 		.reg_read = rv3028_nvram_read,
927 		.reg_write = rv3028_nvram_write,
928 	};
929 	struct nvmem_config eeprom_cfg = {
930 		.name = "rv3028_eeprom",
931 		.word_size = 1,
932 		.stride = 1,
933 		.size = 43,
934 		.type = NVMEM_TYPE_EEPROM,
935 		.reg_read = rv3028_eeprom_read,
936 		.reg_write = rv3028_eeprom_write,
937 	};
938 
939 	rv3028 = devm_kzalloc(&client->dev, sizeof(struct rv3028_data),
940 			      GFP_KERNEL);
941 	if (!rv3028)
942 		return -ENOMEM;
943 
944 	rv3028->regmap = devm_regmap_init_i2c(client, &regmap_config);
945 	if (IS_ERR(rv3028->regmap))
946 		return PTR_ERR(rv3028->regmap);
947 
948 	i2c_set_clientdata(client, rv3028);
949 
950 	ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status);
951 	if (ret < 0)
952 		return ret;
953 
954 	if (status & RV3028_STATUS_AF)
955 		dev_warn(&client->dev, "An alarm may have been missed.\n");
956 
957 	rv3028->rtc = devm_rtc_allocate_device(&client->dev);
958 	if (IS_ERR(rv3028->rtc))
959 		return PTR_ERR(rv3028->rtc);
960 
961 	if (client->irq > 0) {
962 		unsigned long flags;
963 
964 		/*
965 		 * If flags = 0, devm_request_threaded_irq() will use IRQ flags
966 		 * obtained from device tree.
967 		 */
968 		if (dev_fwnode(&client->dev))
969 			flags = 0;
970 		else
971 			flags = IRQF_TRIGGER_LOW;
972 
973 		ret = devm_request_threaded_irq(&client->dev, client->irq,
974 						NULL, rv3028_handle_irq,
975 						flags | IRQF_ONESHOT,
976 						"rv3028", rv3028);
977 		if (ret) {
978 			dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
979 			client->irq = 0;
980 		}
981 	}
982 	if (!client->irq)
983 		clear_bit(RTC_FEATURE_ALARM, rv3028->rtc->features);
984 
985 	ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL1,
986 				 RV3028_CTRL1_WADA, RV3028_CTRL1_WADA);
987 	if (ret)
988 		return ret;
989 
990 	/* setup timestamping */
991 	ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2,
992 				 RV3028_CTRL2_EIE | RV3028_CTRL2_TSE,
993 				 RV3028_CTRL2_EIE | RV3028_CTRL2_TSE);
994 	if (ret)
995 		return ret;
996 
997 	ret = rv3028_set_trickle_charger(rv3028, client);
998 	if (ret)
999 		return ret;
1000 
1001 	ret = rtc_add_group(rv3028->rtc, &rv3028_attr_group);
1002 	if (ret)
1003 		return ret;
1004 
1005 	set_bit(RTC_FEATURE_BACKUP_SWITCH_MODE, rv3028->rtc->features);
1006 
1007 	rv3028->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
1008 	rv3028->rtc->range_max = RTC_TIMESTAMP_END_2099;
1009 	rv3028->rtc->ops = &rv3028_rtc_ops;
1010 	ret = devm_rtc_register_device(rv3028->rtc);
1011 	if (ret)
1012 		return ret;
1013 
1014 	nvmem_cfg.priv = rv3028->regmap;
1015 	devm_rtc_nvmem_register(rv3028->rtc, &nvmem_cfg);
1016 	eeprom_cfg.priv = rv3028;
1017 	devm_rtc_nvmem_register(rv3028->rtc, &eeprom_cfg);
1018 
1019 	rv3028->rtc->max_user_freq = 1;
1020 
1021 #ifdef CONFIG_COMMON_CLK
1022 	rv3028_clkout_register_clk(rv3028, client);
1023 #endif
1024 	return 0;
1025 }
1026 
1027 static const struct acpi_device_id rv3028_i2c_acpi_match[] = {
1028 	{ "MCRY3028" },
1029 	{ }
1030 };
1031 MODULE_DEVICE_TABLE(acpi, rv3028_i2c_acpi_match);
1032 
1033 static const __maybe_unused struct of_device_id rv3028_of_match[] = {
1034 	{ .compatible = "microcrystal,rv3028", },
1035 	{ }
1036 };
1037 MODULE_DEVICE_TABLE(of, rv3028_of_match);
1038 
1039 static const struct i2c_device_id rv3028_id_table[] = {
1040 	{ .name = "rv3028", },
1041 	{ }
1042 };
1043 MODULE_DEVICE_TABLE(i2c, rv3028_id_table);
1044 
1045 static struct i2c_driver rv3028_driver = {
1046 	.driver = {
1047 		.name = "rtc-rv3028",
1048 		.acpi_match_table = rv3028_i2c_acpi_match,
1049 		.of_match_table = of_match_ptr(rv3028_of_match),
1050 	},
1051 	.id_table	= rv3028_id_table,
1052 	.probe		= rv3028_probe,
1053 };
1054 module_i2c_driver(rv3028_driver);
1055 
1056 MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
1057 MODULE_DESCRIPTION("Micro Crystal RV3028 RTC driver");
1058 MODULE_LICENSE("GPL v2");
1059