xref: /linux/arch/mips/sibyte/swarm/setup.c (revision 0ea5c948cb64bab5bc7a5516774eb8536f05aa0d)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation
4  * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
5  */
6 
7 /*
8  * Setup code for the SWARM board
9  */
10 
11 #include <linux/spinlock.h>
12 #include <linux/mm.h>
13 #include <linux/memblock.h>
14 #include <linux/init.h>
15 #include <linux/kernel.h>
16 #include <linux/console.h>
17 #include <linux/screen_info.h>
18 #include <linux/initrd.h>
19 
20 #include <asm/irq.h>
21 #include <asm/io.h>
22 #include <asm/bootinfo.h>
23 #include <asm/mipsregs.h>
24 #include <asm/reboot.h>
25 #include <asm/time.h>
26 #include <asm/traps.h>
27 #include <asm/sibyte/sb1250.h>
28 #ifdef CONFIG_SIBYTE_BCM1x80
29 #include <asm/sibyte/bcm1480_regs.h>
30 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
31 #include <asm/sibyte/sb1250_regs.h>
32 #else
33 #error invalid SiByte board configuration
34 #endif
35 #include <asm/sibyte/sb1250_genbus.h>
36 #include <asm/sibyte/board.h>
37 
38 #ifdef CONFIG_SIBYTE_BCM1x80
39 extern void bcm1480_setup(void);
40 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
41 extern void sb1250_setup(void);
42 #else
43 #error invalid SiByte board configuration
44 #endif
45 
46 extern int xicor_probe(void);
47 extern int xicor_set_time(time64_t);
48 extern time64_t xicor_get_time(void);
49 
50 extern int m41t81_probe(void);
51 extern int m41t81_set_time(time64_t);
52 extern time64_t m41t81_get_time(void);
53 
get_system_type(void)54 const char *get_system_type(void)
55 {
56 	return "SiByte " SIBYTE_BOARD_NAME;
57 }
58 
swarm_be_handler(struct pt_regs * regs,int is_fixup)59 int swarm_be_handler(struct pt_regs *regs, int is_fixup)
60 {
61 	if (!is_fixup && (regs->cp0_cause & 4)) {
62 		/* Data bus error - print PA */
63 		printk("DBE physical address: %010Lx\n",
64 		       __read_64bit_c0_register($26, 1));
65 	}
66 	return is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
67 }
68 
69 enum swarm_rtc_type {
70 	RTC_NONE,
71 	RTC_XICOR,
72 	RTC_M41T81,
73 };
74 
75 enum swarm_rtc_type swarm_rtc_type;
76 
read_persistent_clock64(struct timespec64 * ts)77 void read_persistent_clock64(struct timespec64 *ts)
78 {
79 	time64_t sec;
80 
81 	switch (swarm_rtc_type) {
82 	case RTC_XICOR:
83 		sec = xicor_get_time();
84 		break;
85 
86 	case RTC_M41T81:
87 		sec = m41t81_get_time();
88 		break;
89 
90 	case RTC_NONE:
91 	default:
92 		sec = mktime64(2000, 1, 1, 0, 0, 0);
93 		break;
94 	}
95 	ts->tv_sec = sec;
96 	ts->tv_nsec = 0;
97 }
98 
update_persistent_clock64(struct timespec64 now)99 int update_persistent_clock64(struct timespec64 now)
100 {
101 	time64_t sec = now.tv_sec;
102 
103 	switch (swarm_rtc_type) {
104 	case RTC_XICOR:
105 		return xicor_set_time(sec);
106 
107 	case RTC_M41T81:
108 		return m41t81_set_time(sec);
109 
110 	case RTC_NONE:
111 	default:
112 		return -1;
113 	}
114 }
115 
116 #ifdef CONFIG_VGA_CONSOLE
117 static struct screen_info vgacon_screen_info = {
118 	.orig_video_page	= 52,
119 	.orig_video_mode	= 3,
120 	.orig_video_cols	= 80,
121 	.flags			= 12,
122 	.orig_video_ega_bx	= 3,
123 	.orig_video_lines	= 25,
124 	.orig_video_isVGA	= 0x22,
125 	.orig_video_points	= 16,
126 };
127 #endif
128 
plat_mem_setup(void)129 void __init plat_mem_setup(void)
130 {
131 #ifdef CONFIG_SIBYTE_BCM1x80
132 	bcm1480_setup();
133 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
134 	sb1250_setup();
135 #else
136 #error invalid SiByte board configuration
137 #endif
138 
139 	mips_set_be_handler(swarm_be_handler);
140 
141 	if (xicor_probe())
142 		swarm_rtc_type = RTC_XICOR;
143 	if (m41t81_probe())
144 		swarm_rtc_type = RTC_M41T81;
145 
146 #ifdef CONFIG_VGA_CONSOLE
147 	vgacon_register_screen(&vgacon_screen_info);
148        /* XXXKW for CFE, get lines/cols from environment */
149 #endif
150 }
151 
152 #ifdef LEDS_PHYS
153 
setleds(char * str)154 void setleds(char *str)
155 {
156 	void *reg;
157 	int i;
158 
159 	for (i = 0; i < 4; i++) {
160 		reg = IOADDR(LEDS_PHYS) + 0x20 + ((3 - i) << 3);
161 
162 		if (!str[i])
163 			writeb(' ', reg);
164 		else
165 			writeb(str[i], reg);
166 	}
167 }
168 
169 #endif /* LEDS_PHYS */
170