xref: /linux/include/uapi/regulator/regulator.h (revision 06d07429858317ded2db7986113a9e0129cd599b)
1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2 /*
3  * Regulator uapi header
4  *
5  * Author: Naresh Solanki <Naresh.Solanki@9elements.com>
6  */
7 
8 #ifndef _UAPI_REGULATOR_H
9 #define _UAPI_REGULATOR_H
10 
11 #ifdef __KERNEL__
12 #include <linux/types.h>
13 #else
14 #include <stdint.h>
15 #endif
16 
17 /*
18  * Regulator notifier events.
19  *
20  * UNDER_VOLTAGE  Regulator output is under voltage.
21  * OVER_CURRENT   Regulator output current is too high.
22  * REGULATION_OUT Regulator output is out of regulation.
23  * FAIL           Regulator output has failed.
24  * OVER_TEMP      Regulator over temp.
25  * FORCE_DISABLE  Regulator forcibly shut down by software.
26  * VOLTAGE_CHANGE Regulator voltage changed.
27  *                Data passed is old voltage cast to (void *).
28  * DISABLE        Regulator was disabled.
29  * PRE_VOLTAGE_CHANGE   Regulator is about to have voltage changed.
30  *                      Data passed is "struct pre_voltage_change_data"
31  * ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason.
32  *                      Data passed is old voltage cast to (void *).
33  * PRE_DISABLE    Regulator is about to be disabled
34  * ABORT_DISABLE  Regulator disable failed for some reason
35  *
36  * NOTE: These events can be OR'ed together when passed into handler.
37  */
38 
39 #define REGULATOR_EVENT_UNDER_VOLTAGE		0x01
40 #define REGULATOR_EVENT_OVER_CURRENT		0x02
41 #define REGULATOR_EVENT_REGULATION_OUT		0x04
42 #define REGULATOR_EVENT_FAIL			0x08
43 #define REGULATOR_EVENT_OVER_TEMP		0x10
44 #define REGULATOR_EVENT_FORCE_DISABLE		0x20
45 #define REGULATOR_EVENT_VOLTAGE_CHANGE		0x40
46 #define REGULATOR_EVENT_DISABLE			0x80
47 #define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE	0x100
48 #define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE	0x200
49 #define REGULATOR_EVENT_PRE_DISABLE		0x400
50 #define REGULATOR_EVENT_ABORT_DISABLE		0x800
51 #define REGULATOR_EVENT_ENABLE			0x1000
52 /*
53  * Following notifications should be emitted only if detected condition
54  * is such that the HW is likely to still be working but consumers should
55  * take a recovery action to prevent problems escalating into errors.
56  */
57 #define REGULATOR_EVENT_UNDER_VOLTAGE_WARN	0x2000
58 #define REGULATOR_EVENT_OVER_CURRENT_WARN	0x4000
59 #define REGULATOR_EVENT_OVER_VOLTAGE_WARN	0x8000
60 #define REGULATOR_EVENT_OVER_TEMP_WARN		0x10000
61 #define REGULATOR_EVENT_WARN_MASK		0x1E000
62 
63 struct reg_genl_event {
64 	char reg_name[32];
65 	uint64_t event;
66 };
67 
68 /* attributes of reg_genl_family */
69 enum {
70 	REG_GENL_ATTR_UNSPEC,
71 	REG_GENL_ATTR_EVENT,	/* reg event info needed by user space */
72 	__REG_GENL_ATTR_MAX,
73 };
74 
75 #define REG_GENL_ATTR_MAX (__REG_GENL_ATTR_MAX - 1)
76 
77 /* commands supported by the reg_genl_family */
78 enum {
79 	REG_GENL_CMD_UNSPEC,
80 	REG_GENL_CMD_EVENT,	/* kernel->user notifications for reg events */
81 	__REG_GENL_CMD_MAX,
82 };
83 
84 #define REG_GENL_CMD_MAX (__REG_GENL_CMD_MAX - 1)
85 
86 #define REG_GENL_FAMILY_NAME		"reg_event"
87 #define REG_GENL_VERSION		0x01
88 #define REG_GENL_MCAST_GROUP_NAME	"reg_mc_group"
89 
90 #endif /* _UAPI_REGULATOR_H */
91