1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * twl-regulator.c -- support regulators in twl4030/twl6030 family chips
4 *
5 * Copyright (C) 2008 David Brownell
6 */
7
8 #include <linux/module.h>
9 #include <linux/string.h>
10 #include <linux/slab.h>
11 #include <linux/init.h>
12 #include <linux/err.h>
13 #include <linux/platform_device.h>
14 #include <linux/of.h>
15 #include <linux/regulator/driver.h>
16 #include <linux/regulator/machine.h>
17 #include <linux/regulator/of_regulator.h>
18 #include <linux/mfd/twl.h>
19 #include <linux/delay.h>
20
21 /*
22 * The TWL4030/TW5030/TPS659x0 family chips include power management, a
23 * USB OTG transceiver, an RTC, ADC, PWM, and lots more. Some versions
24 * include an audio codec, battery charger, and more voltage regulators.
25 * These chips are often used in OMAP-based systems.
26 *
27 * This driver implements software-based resource control for various
28 * voltage regulators. This is usually augmented with state machine
29 * based control.
30 */
31
32 struct twlreg_info {
33 /* start of regulator's PM_RECEIVER control register bank */
34 u8 base;
35
36 /* twl resource ID, for resource control state machine */
37 u8 id;
38
39 /* voltage in mV = table[VSEL]; table_len must be a power-of-two */
40 u8 table_len;
41 const u16 *table;
42
43 /* State REMAP default configuration */
44 u8 remap;
45
46 /* used by regulator core */
47 struct regulator_desc desc;
48
49 /* chip specific features */
50 unsigned long features;
51
52 /* data passed from board for external get/set voltage */
53 void *data;
54 };
55
56
57 /* LDO control registers ... offset is from the base of its register bank.
58 * The first three registers of all power resource banks help hardware to
59 * manage the various resource groups.
60 */
61 /* Common offset in TWL4030/6030 */
62 #define VREG_GRP 0
63 /* TWL4030 register offsets */
64 #define VREG_TYPE 1
65 #define VREG_REMAP 2
66 #define VREG_DEDICATED 3 /* LDO control */
67 #define VREG_VOLTAGE_SMPS_4030 9
68 /* TWL6030 register offsets */
69 #define VREG_TRANS 1
70 #define VREG_STATE 2
71 #define VREG_VOLTAGE 3
72 #define VREG_VOLTAGE_SMPS 4
73
74 static inline int
twlreg_read(struct twlreg_info * info,unsigned slave_subgp,unsigned offset)75 twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset)
76 {
77 u8 value;
78 int status;
79
80 status = twl_i2c_read_u8(slave_subgp,
81 &value, info->base + offset);
82 return (status < 0) ? status : value;
83 }
84
85 static inline int
twlreg_write(struct twlreg_info * info,unsigned slave_subgp,unsigned offset,u8 value)86 twlreg_write(struct twlreg_info *info, unsigned slave_subgp, unsigned offset,
87 u8 value)
88 {
89 return twl_i2c_write_u8(slave_subgp,
90 value, info->base + offset);
91 }
92
93 /*----------------------------------------------------------------------*/
94
95 /* generic power resource operations, which work on all regulators */
96
twlreg_grp(struct regulator_dev * rdev)97 static int twlreg_grp(struct regulator_dev *rdev)
98 {
99 return twlreg_read(rdev_get_drvdata(rdev), TWL_MODULE_PM_RECEIVER,
100 VREG_GRP);
101 }
102
103 /*
104 * Enable/disable regulators by joining/leaving the P1 (processor) group.
105 * We assume nobody else is updating the DEV_GRP registers.
106 */
107 /* definition for 4030 family */
108 #define P3_GRP_4030 BIT(7) /* "peripherals" */
109 #define P2_GRP_4030 BIT(6) /* secondary processor, modem, etc */
110 #define P1_GRP_4030 BIT(5) /* CPU/Linux */
111 /* definition for 6030 family */
112 #define P3_GRP_6030 BIT(2) /* secondary processor, modem, etc */
113 #define P2_GRP_6030 BIT(1) /* "peripherals" */
114 #define P1_GRP_6030 BIT(0) /* CPU/Linux */
115
twl4030reg_is_enabled(struct regulator_dev * rdev)116 static int twl4030reg_is_enabled(struct regulator_dev *rdev)
117 {
118 int state = twlreg_grp(rdev);
119
120 if (state < 0)
121 return state;
122
123 return state & P1_GRP_4030;
124 }
125
126 #define PB_I2C_BUSY BIT(0)
127 #define PB_I2C_BWEN BIT(1)
128
129 /* Wait until buffer empty/ready to send a word on power bus. */
twl4030_wait_pb_ready(void)130 static int twl4030_wait_pb_ready(void)
131 {
132
133 int ret;
134 int timeout = 10;
135 u8 val;
136
137 do {
138 ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val,
139 TWL4030_PM_MASTER_PB_CFG);
140 if (ret < 0)
141 return ret;
142
143 if (!(val & PB_I2C_BUSY))
144 return 0;
145
146 mdelay(1);
147 timeout--;
148 } while (timeout);
149
150 return -ETIMEDOUT;
151 }
152
153 /* Send a word over the powerbus */
twl4030_send_pb_msg(unsigned msg)154 static int twl4030_send_pb_msg(unsigned msg)
155 {
156 u8 val;
157 int ret;
158
159 /* save powerbus configuration */
160 ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val,
161 TWL4030_PM_MASTER_PB_CFG);
162 if (ret < 0)
163 return ret;
164
165 /* Enable i2c access to powerbus */
166 ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val | PB_I2C_BWEN,
167 TWL4030_PM_MASTER_PB_CFG);
168 if (ret < 0)
169 return ret;
170
171 ret = twl4030_wait_pb_ready();
172 if (ret < 0)
173 return ret;
174
175 ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, msg >> 8,
176 TWL4030_PM_MASTER_PB_WORD_MSB);
177 if (ret < 0)
178 return ret;
179
180 ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, msg & 0xff,
181 TWL4030_PM_MASTER_PB_WORD_LSB);
182 if (ret < 0)
183 return ret;
184
185 ret = twl4030_wait_pb_ready();
186 if (ret < 0)
187 return ret;
188
189 /* Restore powerbus configuration */
190 return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val,
191 TWL4030_PM_MASTER_PB_CFG);
192 }
193
twl4030reg_enable(struct regulator_dev * rdev)194 static int twl4030reg_enable(struct regulator_dev *rdev)
195 {
196 struct twlreg_info *info = rdev_get_drvdata(rdev);
197 int grp;
198
199 grp = twlreg_grp(rdev);
200 if (grp < 0)
201 return grp;
202
203 grp |= P1_GRP_4030;
204
205 return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
206 }
207
twl4030reg_disable(struct regulator_dev * rdev)208 static int twl4030reg_disable(struct regulator_dev *rdev)
209 {
210 struct twlreg_info *info = rdev_get_drvdata(rdev);
211 int grp;
212
213 grp = twlreg_grp(rdev);
214 if (grp < 0)
215 return grp;
216
217 grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030);
218
219 return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
220 }
221
twl4030reg_get_status(struct regulator_dev * rdev)222 static int twl4030reg_get_status(struct regulator_dev *rdev)
223 {
224 int state = twlreg_grp(rdev);
225
226 if (state < 0)
227 return state;
228 state &= 0x0f;
229
230 /* assume state != WARM_RESET; we'd not be running... */
231 if (!state)
232 return REGULATOR_STATUS_OFF;
233 return (state & BIT(3))
234 ? REGULATOR_STATUS_NORMAL
235 : REGULATOR_STATUS_STANDBY;
236 }
237
twl4030reg_set_mode(struct regulator_dev * rdev,unsigned mode)238 static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
239 {
240 struct twlreg_info *info = rdev_get_drvdata(rdev);
241 unsigned message;
242
243 /* We can only set the mode through state machine commands... */
244 switch (mode) {
245 case REGULATOR_MODE_NORMAL:
246 message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_ACTIVE);
247 break;
248 case REGULATOR_MODE_STANDBY:
249 message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_SLEEP);
250 break;
251 default:
252 return -EINVAL;
253 }
254
255 return twl4030_send_pb_msg(message);
256 }
257
twl4030reg_map_mode(unsigned int mode)258 static inline unsigned int twl4030reg_map_mode(unsigned int mode)
259 {
260 switch (mode) {
261 case RES_STATE_ACTIVE:
262 return REGULATOR_MODE_NORMAL;
263 case RES_STATE_SLEEP:
264 return REGULATOR_MODE_STANDBY;
265 default:
266 return REGULATOR_MODE_INVALID;
267 }
268 }
269
270 /*----------------------------------------------------------------------*/
271
272 /*
273 * Support for adjustable-voltage LDOs uses a four bit (or less) voltage
274 * select field in its control register. We use tables indexed by VSEL
275 * to record voltages in milliVolts. (Accuracy is about three percent.)
276 *
277 * Note that VSEL values for VAUX2 changed in twl5030 and newer silicon;
278 * currently handled by listing two slightly different VAUX2 regulators,
279 * only one of which will be configured.
280 *
281 * VSEL values documented as "TI cannot support these values" are flagged
282 * in these tables as UNSUP() values; we normally won't assign them.
283 *
284 * VAUX3 at 3V is incorrectly listed in some TI manuals as unsupported.
285 * TI are revising the twl5030/tps659x0 specs to support that 3.0V setting.
286 */
287 #define UNSUP_MASK 0x8000
288
289 #define UNSUP(x) (UNSUP_MASK | (x))
290 #define IS_UNSUP(info, x) \
291 ((UNSUP_MASK & (x)) && \
292 !((info)->features & TWL4030_ALLOW_UNSUPPORTED))
293 #define LDO_MV(x) (~UNSUP_MASK & (x))
294
295
296 static const u16 VAUX1_VSEL_table[] = {
297 UNSUP(1500), UNSUP(1800), 2500, 2800,
298 3000, 3000, 3000, 3000,
299 };
300 static const u16 VAUX2_4030_VSEL_table[] = {
301 UNSUP(1000), UNSUP(1000), UNSUP(1200), 1300,
302 1500, 1800, UNSUP(1850), 2500,
303 UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
304 UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
305 };
306 static const u16 VAUX2_VSEL_table[] = {
307 1700, 1700, 1900, 1300,
308 1500, 1800, 2000, 2500,
309 2100, 2800, 2200, 2300,
310 2400, 2400, 2400, 2400,
311 };
312 static const u16 VAUX3_VSEL_table[] = {
313 1500, 1800, 2500, 2800,
314 3000, 3000, 3000, 3000,
315 };
316 static const u16 VAUX4_VSEL_table[] = {
317 700, 1000, 1200, UNSUP(1300),
318 1500, 1800, UNSUP(1850), 2500,
319 UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
320 UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
321 };
322 static const u16 VMMC1_VSEL_table[] = {
323 1850, 2850, 3000, 3150,
324 };
325 static const u16 VMMC2_VSEL_table[] = {
326 UNSUP(1000), UNSUP(1000), UNSUP(1200), UNSUP(1300),
327 UNSUP(1500), UNSUP(1800), 1850, UNSUP(2500),
328 2600, 2800, 2850, 3000,
329 3150, 3150, 3150, 3150,
330 };
331 static const u16 VPLL1_VSEL_table[] = {
332 1000, 1200, 1300, 1800,
333 UNSUP(2800), UNSUP(3000), UNSUP(3000), UNSUP(3000),
334 };
335 static const u16 VPLL2_VSEL_table[] = {
336 700, 1000, 1200, 1300,
337 UNSUP(1500), 1800, UNSUP(1850), UNSUP(2500),
338 UNSUP(2600), UNSUP(2800), UNSUP(2850), UNSUP(3000),
339 UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
340 };
341 static const u16 VSIM_VSEL_table[] = {
342 UNSUP(1000), UNSUP(1200), UNSUP(1300), 1800,
343 2800, 3000, 3000, 3000,
344 };
345 static const u16 VDAC_VSEL_table[] = {
346 1200, 1300, 1800, 1800,
347 };
348 static const u16 VIO_VSEL_table[] = {
349 1800, 1850,
350 };
351 static const u16 VINTANA2_VSEL_table[] = {
352 2500, 2750,
353 };
354
355 /* 600mV to 1450mV in 12.5 mV steps */
356 static const struct linear_range VDD1_ranges[] = {
357 REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500)
358 };
359
360 /* 600mV to 1450mV in 12.5 mV steps, everything above = 1500mV */
361 static const struct linear_range VDD2_ranges[] = {
362 REGULATOR_LINEAR_RANGE(600000, 0, 68, 12500),
363 REGULATOR_LINEAR_RANGE(1500000, 69, 69, 12500)
364 };
365
twl4030ldo_list_voltage(struct regulator_dev * rdev,unsigned index)366 static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
367 {
368 struct twlreg_info *info = rdev_get_drvdata(rdev);
369 int mV = info->table[index];
370
371 return IS_UNSUP(info, mV) ? 0 : (LDO_MV(mV) * 1000);
372 }
373
374 static int
twl4030ldo_set_voltage_sel(struct regulator_dev * rdev,unsigned selector)375 twl4030ldo_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
376 {
377 struct twlreg_info *info = rdev_get_drvdata(rdev);
378
379 return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE,
380 selector);
381 }
382
twl4030ldo_get_voltage_sel(struct regulator_dev * rdev)383 static int twl4030ldo_get_voltage_sel(struct regulator_dev *rdev)
384 {
385 struct twlreg_info *info = rdev_get_drvdata(rdev);
386 int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE);
387
388 if (vsel < 0)
389 return vsel;
390
391 vsel &= info->table_len - 1;
392 return vsel;
393 }
394
395 static const struct regulator_ops twl4030ldo_ops = {
396 .list_voltage = twl4030ldo_list_voltage,
397
398 .set_voltage_sel = twl4030ldo_set_voltage_sel,
399 .get_voltage_sel = twl4030ldo_get_voltage_sel,
400
401 .enable = twl4030reg_enable,
402 .disable = twl4030reg_disable,
403 .is_enabled = twl4030reg_is_enabled,
404
405 .set_mode = twl4030reg_set_mode,
406
407 .get_status = twl4030reg_get_status,
408 };
409
410 static int
twl4030smps_set_voltage(struct regulator_dev * rdev,int min_uV,int max_uV,unsigned * selector)411 twl4030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
412 unsigned *selector)
413 {
414 struct twlreg_info *info = rdev_get_drvdata(rdev);
415 int vsel = DIV_ROUND_UP(min_uV - 600000, 12500);
416
417 twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS_4030, vsel);
418
419 return 0;
420 }
421
twl4030smps_get_voltage(struct regulator_dev * rdev)422 static int twl4030smps_get_voltage(struct regulator_dev *rdev)
423 {
424 struct twlreg_info *info = rdev_get_drvdata(rdev);
425 int vsel;
426
427 vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
428 VREG_VOLTAGE_SMPS_4030);
429
430 return vsel * 12500 + 600000;
431 }
432
433 static const struct regulator_ops twl4030smps_ops = {
434 .list_voltage = regulator_list_voltage_linear_range,
435
436 .set_voltage = twl4030smps_set_voltage,
437 .get_voltage = twl4030smps_get_voltage,
438 };
439
440 /*----------------------------------------------------------------------*/
441
442 static const struct regulator_ops twl4030fixed_ops = {
443 .list_voltage = regulator_list_voltage_linear,
444
445 .enable = twl4030reg_enable,
446 .disable = twl4030reg_disable,
447 .is_enabled = twl4030reg_is_enabled,
448
449 .set_mode = twl4030reg_set_mode,
450
451 .get_status = twl4030reg_get_status,
452 };
453
454 /*----------------------------------------------------------------------*/
455
456 #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \
457 static const struct twlreg_info TWL4030_INFO_##label = { \
458 .base = offset, \
459 .id = num, \
460 .table_len = ARRAY_SIZE(label##_VSEL_table), \
461 .table = label##_VSEL_table, \
462 .remap = remap_conf, \
463 .desc = { \
464 .name = #label, \
465 .id = TWL4030_REG_##label, \
466 .n_voltages = ARRAY_SIZE(label##_VSEL_table), \
467 .ops = &twl4030ldo_ops, \
468 .type = REGULATOR_VOLTAGE, \
469 .owner = THIS_MODULE, \
470 .enable_time = turnon_delay, \
471 .of_map_mode = twl4030reg_map_mode, \
472 }, \
473 }
474
475 #define TWL4030_ADJUSTABLE_SMPS(label, offset, num, turnon_delay, remap_conf, \
476 n_volt) \
477 static const struct twlreg_info TWL4030_INFO_##label = { \
478 .base = offset, \
479 .id = num, \
480 .remap = remap_conf, \
481 .desc = { \
482 .name = #label, \
483 .id = TWL4030_REG_##label, \
484 .ops = &twl4030smps_ops, \
485 .type = REGULATOR_VOLTAGE, \
486 .owner = THIS_MODULE, \
487 .enable_time = turnon_delay, \
488 .of_map_mode = twl4030reg_map_mode, \
489 .n_voltages = n_volt, \
490 .n_linear_ranges = ARRAY_SIZE(label ## _ranges), \
491 .linear_ranges = label ## _ranges, \
492 }, \
493 }
494
495 #define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
496 remap_conf) \
497 static const struct twlreg_info TWLFIXED_INFO_##label = { \
498 .base = offset, \
499 .id = num, \
500 .remap = remap_conf, \
501 .desc = { \
502 .name = #label, \
503 .id = TWL4030##_REG_##label, \
504 .n_voltages = 1, \
505 .ops = &twl4030fixed_ops, \
506 .type = REGULATOR_VOLTAGE, \
507 .owner = THIS_MODULE, \
508 .min_uV = mVolts * 1000, \
509 .enable_time = turnon_delay, \
510 .of_map_mode = twl4030reg_map_mode, \
511 }, \
512 }
513
514 /*
515 * We list regulators here if systems need some level of
516 * software control over them after boot.
517 */
518 TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1, 100, 0x08);
519 TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2, 100, 0x08);
520 TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2, 100, 0x08);
521 TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3, 100, 0x08);
522 TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4, 100, 0x08);
523 TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5, 100, 0x08);
524 TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6, 100, 0x08);
525 TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7, 100, 0x00);
526 TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8, 100, 0x08);
527 TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00);
528 TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08);
529 TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08);
530 TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08);
531 TWL4030_ADJUSTABLE_SMPS(VDD1, 0x55, 15, 1000, 0x08, 68);
532 TWL4030_ADJUSTABLE_SMPS(VDD2, 0x63, 16, 1000, 0x08, 69);
533 /* VUSBCP is managed *only* by the USB subchip */
534 TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08);
535 TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08);
536 TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08);
537 TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08);
538 TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08);
539
540 #define TWL_OF_MATCH(comp, family, label) \
541 { \
542 .compatible = comp, \
543 .data = &family##_INFO_##label, \
544 }
545
546 #define TWL4030_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL4030, label)
547 #define TWL6030_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6030, label)
548 #define TWL6032_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWL6032, label)
549 #define TWLFIXED_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLFIXED, label)
550 #define TWLSMPS_OF_MATCH(comp, label) TWL_OF_MATCH(comp, TWLSMPS, label)
551
552 static const struct of_device_id twl_of_match[] = {
553 TWL4030_OF_MATCH("ti,twl4030-vaux1", VAUX1),
554 TWL4030_OF_MATCH("ti,twl4030-vaux2", VAUX2_4030),
555 TWL4030_OF_MATCH("ti,twl5030-vaux2", VAUX2),
556 TWL4030_OF_MATCH("ti,twl4030-vaux3", VAUX3),
557 TWL4030_OF_MATCH("ti,twl4030-vaux4", VAUX4),
558 TWL4030_OF_MATCH("ti,twl4030-vmmc1", VMMC1),
559 TWL4030_OF_MATCH("ti,twl4030-vmmc2", VMMC2),
560 TWL4030_OF_MATCH("ti,twl4030-vpll1", VPLL1),
561 TWL4030_OF_MATCH("ti,twl4030-vpll2", VPLL2),
562 TWL4030_OF_MATCH("ti,twl4030-vsim", VSIM),
563 TWL4030_OF_MATCH("ti,twl4030-vdac", VDAC),
564 TWL4030_OF_MATCH("ti,twl4030-vintana2", VINTANA2),
565 TWL4030_OF_MATCH("ti,twl4030-vio", VIO),
566 TWL4030_OF_MATCH("ti,twl4030-vdd1", VDD1),
567 TWL4030_OF_MATCH("ti,twl4030-vdd2", VDD2),
568 TWLFIXED_OF_MATCH("ti,twl4030-vintana1", VINTANA1),
569 TWLFIXED_OF_MATCH("ti,twl4030-vintdig", VINTDIG),
570 TWLFIXED_OF_MATCH("ti,twl4030-vusb1v5", VUSB1V5),
571 TWLFIXED_OF_MATCH("ti,twl4030-vusb1v8", VUSB1V8),
572 TWLFIXED_OF_MATCH("ti,twl4030-vusb3v1", VUSB3V1),
573 {},
574 };
575 MODULE_DEVICE_TABLE(of, twl_of_match);
576
twlreg_probe(struct platform_device * pdev)577 static int twlreg_probe(struct platform_device *pdev)
578 {
579 int id;
580 struct twlreg_info *info;
581 const struct twlreg_info *template;
582 struct regulator_init_data *initdata;
583 struct regulation_constraints *c;
584 struct regulator_dev *rdev;
585 struct regulator_config config = { };
586
587 template = of_device_get_match_data(&pdev->dev);
588 if (!template)
589 return -ENODEV;
590
591 id = template->desc.id;
592 initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
593 &template->desc);
594 if (!initdata)
595 return -EINVAL;
596
597 info = devm_kmemdup(&pdev->dev, template, sizeof(*info), GFP_KERNEL);
598 if (!info)
599 return -ENOMEM;
600
601 /* Constrain board-specific capabilities according to what
602 * this driver and the chip itself can actually do.
603 */
604 c = &initdata->constraints;
605 c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY;
606 c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE
607 | REGULATOR_CHANGE_MODE
608 | REGULATOR_CHANGE_STATUS;
609 switch (id) {
610 case TWL4030_REG_VIO:
611 case TWL4030_REG_VDD1:
612 case TWL4030_REG_VDD2:
613 case TWL4030_REG_VPLL1:
614 case TWL4030_REG_VINTANA1:
615 case TWL4030_REG_VINTANA2:
616 case TWL4030_REG_VINTDIG:
617 c->always_on = true;
618 break;
619 default:
620 break;
621 }
622
623 config.dev = &pdev->dev;
624 config.init_data = initdata;
625 config.driver_data = info;
626 config.of_node = pdev->dev.of_node;
627
628 rdev = devm_regulator_register(&pdev->dev, &info->desc, &config);
629 if (IS_ERR(rdev)) {
630 dev_err(&pdev->dev, "can't register %s, %ld\n",
631 info->desc.name, PTR_ERR(rdev));
632 return PTR_ERR(rdev);
633 }
634 platform_set_drvdata(pdev, rdev);
635
636 twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP, info->remap);
637
638 /* NOTE: many regulators support short-circuit IRQs (presentable
639 * as REGULATOR_OVER_CURRENT notifications?) configured via:
640 * - SC_CONFIG
641 * - SC_DETECT1 (vintana2, vmmc1/2, vaux1/2/3/4)
642 * - SC_DETECT2 (vusb, vdac, vio, vdd1/2, vpll2)
643 * - IT_CONFIG
644 */
645
646 return 0;
647 }
648
649 MODULE_ALIAS("platform:twl4030_reg");
650
651 static struct platform_driver twlreg_driver = {
652 .probe = twlreg_probe,
653 /* NOTE: short name, to work around driver model truncation of
654 * "twl_regulator.12" (and friends) to "twl_regulator.1".
655 */
656 .driver = {
657 .name = "twl4030_reg",
658 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
659 .of_match_table = of_match_ptr(twl_of_match),
660 },
661 };
662
twlreg_init(void)663 static int __init twlreg_init(void)
664 {
665 return platform_driver_register(&twlreg_driver);
666 }
667 subsys_initcall(twlreg_init);
668
twlreg_exit(void)669 static void __exit twlreg_exit(void)
670 {
671 platform_driver_unregister(&twlreg_driver);
672 }
673 module_exit(twlreg_exit)
674
675 MODULE_DESCRIPTION("TWL4030 regulator driver");
676 MODULE_LICENSE("GPL");
677