1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * CDC Ethernet based networking peripherals
4 * Copyright (C) 2003-2005 by David Brownell
5 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
6 */
7
8 // #define DEBUG // error path messages, extra info
9 // #define VERBOSE // more; success messages
10
11 #include <linux/module.h>
12 #include <linux/netdevice.h>
13 #include <linux/etherdevice.h>
14 #include <linux/ethtool.h>
15 #include <linux/workqueue.h>
16 #include <linux/mii.h>
17 #include <linux/usb.h>
18 #include <linux/usb/cdc.h>
19 #include <linux/usb/usbnet.h>
20
21
22 #if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
23
is_rndis(struct usb_interface_descriptor * desc)24 static int is_rndis(struct usb_interface_descriptor *desc)
25 {
26 return (desc->bInterfaceClass == USB_CLASS_COMM &&
27 desc->bInterfaceSubClass == 2 &&
28 desc->bInterfaceProtocol == 0xff);
29 }
30
is_activesync(struct usb_interface_descriptor * desc)31 static int is_activesync(struct usb_interface_descriptor *desc)
32 {
33 return (desc->bInterfaceClass == USB_CLASS_MISC &&
34 desc->bInterfaceSubClass == 1 &&
35 desc->bInterfaceProtocol == 1);
36 }
37
is_wireless_rndis(struct usb_interface_descriptor * desc)38 static int is_wireless_rndis(struct usb_interface_descriptor *desc)
39 {
40 return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
41 desc->bInterfaceSubClass == 1 &&
42 desc->bInterfaceProtocol == 3);
43 }
44
is_novatel_rndis(struct usb_interface_descriptor * desc)45 static int is_novatel_rndis(struct usb_interface_descriptor *desc)
46 {
47 return (desc->bInterfaceClass == USB_CLASS_MISC &&
48 desc->bInterfaceSubClass == 4 &&
49 desc->bInterfaceProtocol == 1);
50 }
51
52 #else
53
54 #define is_rndis(desc) 0
55 #define is_activesync(desc) 0
56 #define is_wireless_rndis(desc) 0
57 #define is_novatel_rndis(desc) 0
58
59 #endif
60
61 static const u8 mbm_guid[16] = {
62 0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
63 0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
64 };
65
usbnet_cdc_update_filter(struct usbnet * dev)66 void usbnet_cdc_update_filter(struct usbnet *dev)
67 {
68 struct net_device *net = dev->net;
69
70 u16 cdc_filter = USB_CDC_PACKET_TYPE_DIRECTED
71 | USB_CDC_PACKET_TYPE_BROADCAST;
72
73 /* filtering on the device is an optional feature and not worth
74 * the hassle so we just roughly care about snooping and if any
75 * multicast is requested, we take every multicast
76 */
77 if (net->flags & IFF_PROMISC)
78 cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS;
79 if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI))
80 cdc_filter |= USB_CDC_PACKET_TYPE_ALL_MULTICAST;
81
82 usb_control_msg(dev->udev,
83 usb_sndctrlpipe(dev->udev, 0),
84 USB_CDC_SET_ETHERNET_PACKET_FILTER,
85 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
86 cdc_filter,
87 dev->intf->cur_altsetting->desc.bInterfaceNumber,
88 NULL,
89 0,
90 USB_CTRL_SET_TIMEOUT
91 );
92 }
93 EXPORT_SYMBOL_GPL(usbnet_cdc_update_filter);
94
95 /* We need to override usbnet_*_link_ksettings in bind() */
96 static const struct ethtool_ops cdc_ether_ethtool_ops = {
97 .get_link = usbnet_get_link,
98 .nway_reset = usbnet_nway_reset,
99 .get_drvinfo = usbnet_get_drvinfo,
100 .get_msglevel = usbnet_get_msglevel,
101 .set_msglevel = usbnet_set_msglevel,
102 .get_ts_info = ethtool_op_get_ts_info,
103 .get_link_ksettings = usbnet_get_link_ksettings_internal,
104 .set_link_ksettings = NULL,
105 };
106
107 /* probes control interface, claims data interface, collects the bulk
108 * endpoints, activates data interface (if needed), maybe sets MTU.
109 * all pure cdc, except for certain firmware workarounds, and knowing
110 * that rndis uses one different rule.
111 */
usbnet_generic_cdc_bind(struct usbnet * dev,struct usb_interface * intf)112 int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
113 {
114 u8 *buf = intf->cur_altsetting->extra;
115 int len = intf->cur_altsetting->extralen;
116 struct usb_interface_descriptor *d;
117 struct cdc_state *info = (void *) &dev->data;
118 int status;
119 int rndis;
120 bool android_rndis_quirk = false;
121 struct usb_driver *driver = driver_of(intf);
122 struct usb_cdc_parsed_header header;
123
124 if (sizeof(dev->data) < sizeof(*info))
125 return -EDOM;
126
127 /* expect strict spec conformance for the descriptors, but
128 * cope with firmware which stores them in the wrong place
129 */
130 if (len == 0 && dev->udev->actconfig->extralen) {
131 /* Motorola SB4100 (and others: Brad Hards says it's
132 * from a Broadcom design) put CDC descriptors here
133 */
134 buf = dev->udev->actconfig->extra;
135 len = dev->udev->actconfig->extralen;
136 dev_dbg(&intf->dev, "CDC descriptors on config\n");
137 }
138
139 /* Maybe CDC descriptors are after the endpoint? This bug has
140 * been seen on some 2Wire Inc RNDIS-ish products.
141 */
142 if (len == 0) {
143 struct usb_host_endpoint *hep;
144
145 hep = intf->cur_altsetting->endpoint;
146 if (hep) {
147 buf = hep->extra;
148 len = hep->extralen;
149 }
150 if (len)
151 dev_dbg(&intf->dev,
152 "CDC descriptors on endpoint\n");
153 }
154
155 /* this assumes that if there's a non-RNDIS vendor variant
156 * of cdc-acm, it'll fail RNDIS requests cleanly.
157 */
158 rndis = (is_rndis(&intf->cur_altsetting->desc) ||
159 is_activesync(&intf->cur_altsetting->desc) ||
160 is_wireless_rndis(&intf->cur_altsetting->desc) ||
161 is_novatel_rndis(&intf->cur_altsetting->desc));
162
163 memset(info, 0, sizeof(*info));
164 info->control = intf;
165
166 cdc_parse_cdc_header(&header, intf, buf, len);
167
168 info->u = header.usb_cdc_union_desc;
169 info->header = header.usb_cdc_header_desc;
170 info->ether = header.usb_cdc_ether_desc;
171 if (!info->u) {
172 if (rndis)
173 goto skip;
174 else /* in that case a quirk is mandatory */
175 goto bad_desc;
176 }
177 /* we need a master/control interface (what we're
178 * probed with) and a slave/data interface; union
179 * descriptors sort this all out.
180 */
181 info->control = usb_ifnum_to_if(dev->udev, info->u->bMasterInterface0);
182 info->data = usb_ifnum_to_if(dev->udev, info->u->bSlaveInterface0);
183 if (!info->control || !info->data) {
184 dev_dbg(&intf->dev,
185 "master #%u/%p slave #%u/%p\n",
186 info->u->bMasterInterface0,
187 info->control,
188 info->u->bSlaveInterface0,
189 info->data);
190 /* fall back to hard-wiring for RNDIS */
191 if (rndis) {
192 android_rndis_quirk = true;
193 goto skip;
194 }
195 goto bad_desc;
196 }
197 if (info->control != intf) {
198 dev_dbg(&intf->dev, "bogus CDC Union\n");
199 /* Ambit USB Cable Modem (and maybe others)
200 * interchanges master and slave interface.
201 */
202 if (info->data == intf) {
203 info->data = info->control;
204 info->control = intf;
205 } else
206 goto bad_desc;
207 }
208
209 /* some devices merge these - skip class check */
210 if (info->control == info->data)
211 goto skip;
212
213 /* a data interface altsetting does the real i/o */
214 d = &info->data->cur_altsetting->desc;
215 if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
216 dev_dbg(&intf->dev, "slave class %u\n", d->bInterfaceClass);
217 goto bad_desc;
218 }
219 skip:
220 /* Communication class functions with bmCapabilities are not
221 * RNDIS. But some Wireless class RNDIS functions use
222 * bmCapabilities for their own purpose. The failsafe is
223 * therefore applied only to Communication class RNDIS
224 * functions. The rndis test is redundant, but a cheap
225 * optimization.
226 */
227 if (rndis && is_rndis(&intf->cur_altsetting->desc) &&
228 header.usb_cdc_acm_descriptor &&
229 header.usb_cdc_acm_descriptor->bmCapabilities) {
230 dev_dbg(&intf->dev,
231 "ACM capabilities %02x, not really RNDIS?\n",
232 header.usb_cdc_acm_descriptor->bmCapabilities);
233 goto bad_desc;
234 }
235
236 if (header.usb_cdc_ether_desc && info->ether->wMaxSegmentSize) {
237 dev->hard_mtu = le16_to_cpu(info->ether->wMaxSegmentSize);
238 /* because of Zaurus, we may be ignoring the host
239 * side link address we were given.
240 */
241 }
242
243 if (header.usb_cdc_mdlm_desc &&
244 memcmp(header.usb_cdc_mdlm_desc->bGUID, mbm_guid, 16)) {
245 dev_dbg(&intf->dev, "GUID doesn't match\n");
246 goto bad_desc;
247 }
248
249 if (header.usb_cdc_mdlm_detail_desc &&
250 header.usb_cdc_mdlm_detail_desc->bLength <
251 (sizeof(struct usb_cdc_mdlm_detail_desc) + 1)) {
252 dev_dbg(&intf->dev, "Descriptor too short\n");
253 goto bad_desc;
254 }
255
256
257
258 /* Microsoft ActiveSync based and some regular RNDIS devices lack the
259 * CDC descriptors, so we'll hard-wire the interfaces and not check
260 * for descriptors.
261 *
262 * Some Android RNDIS devices have a CDC Union descriptor pointing
263 * to non-existing interfaces. Ignore that and attempt the same
264 * hard-wired 0 and 1 interfaces.
265 */
266 if (rndis && (!info->u || android_rndis_quirk)) {
267 info->control = usb_ifnum_to_if(dev->udev, 0);
268 info->data = usb_ifnum_to_if(dev->udev, 1);
269 if (!info->control || !info->data || info->control != intf) {
270 dev_dbg(&intf->dev,
271 "rndis: master #0/%p slave #1/%p\n",
272 info->control,
273 info->data);
274 goto bad_desc;
275 }
276
277 } else if (!info->header || (!rndis && !info->ether)) {
278 dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
279 info->header ? "" : "header ",
280 info->u ? "" : "union ",
281 info->ether ? "" : "ether ");
282 goto bad_desc;
283 }
284
285 /* claim data interface and set it up ... with side effects.
286 * network traffic can't flow until an altsetting is enabled.
287 */
288 if (info->data != info->control) {
289 status = usb_driver_claim_interface(driver, info->data, dev);
290 if (status < 0)
291 return status;
292 }
293 status = usbnet_get_endpoints(dev, info->data);
294 if (status < 0) {
295 /* ensure immediate exit from usbnet_disconnect */
296 usb_set_intfdata(info->data, NULL);
297 if (info->data != info->control)
298 usb_driver_release_interface(driver, info->data);
299 return status;
300 }
301
302 /* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
303 if (info->data != info->control)
304 dev->status = NULL;
305 if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
306 struct usb_endpoint_descriptor *desc;
307
308 dev->status = &info->control->cur_altsetting->endpoint[0];
309 desc = &dev->status->desc;
310 if (!usb_endpoint_is_int_in(desc) ||
311 (le16_to_cpu(desc->wMaxPacketSize)
312 < sizeof(struct usb_cdc_notification)) ||
313 !desc->bInterval) {
314 dev_dbg(&intf->dev, "bad notification endpoint\n");
315 dev->status = NULL;
316 }
317 }
318 if (rndis && !dev->status) {
319 dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
320 usb_set_intfdata(info->data, NULL);
321 usb_driver_release_interface(driver, info->data);
322 return -ENODEV;
323 }
324
325 /* override ethtool_ops */
326 dev->net->ethtool_ops = &cdc_ether_ethtool_ops;
327
328 return 0;
329
330 bad_desc:
331 dev_info(&dev->udev->dev, "bad CDC descriptors\n");
332 return -ENODEV;
333 }
334 EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
335
336
337 /* like usbnet_generic_cdc_bind() but handles filter initialization
338 * correctly
339 */
usbnet_ether_cdc_bind(struct usbnet * dev,struct usb_interface * intf)340 int usbnet_ether_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
341 {
342 int rv;
343
344 rv = usbnet_generic_cdc_bind(dev, intf);
345 if (rv < 0)
346 goto bail_out;
347
348 /* Some devices don't initialise properly. In particular
349 * the packet filter is not reset. There are devices that
350 * don't do reset all the way. So the packet filter should
351 * be set to a sane initial value.
352 */
353 usbnet_cdc_update_filter(dev);
354
355 bail_out:
356 return rv;
357 }
358 EXPORT_SYMBOL_GPL(usbnet_ether_cdc_bind);
359
usbnet_cdc_unbind(struct usbnet * dev,struct usb_interface * intf)360 void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
361 {
362 struct cdc_state *info = (void *) &dev->data;
363 struct usb_driver *driver = driver_of(intf);
364
365 /* combined interface - nothing to do */
366 if (info->data == info->control)
367 return;
368
369 /* disconnect master --> disconnect slave */
370 if (intf == info->control && info->data) {
371 /* ensure immediate exit from usbnet_disconnect */
372 usb_set_intfdata(info->data, NULL);
373 usb_driver_release_interface(driver, info->data);
374 info->data = NULL;
375 }
376
377 /* and vice versa (just in case) */
378 else if (intf == info->data && info->control) {
379 /* ensure immediate exit from usbnet_disconnect */
380 usb_set_intfdata(info->control, NULL);
381 usb_driver_release_interface(driver, info->control);
382 info->control = NULL;
383 }
384 }
385 EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
386
387 /* Communications Device Class, Ethernet Control model
388 *
389 * Takes two interfaces. The DATA interface is inactive till an altsetting
390 * is selected. Configuration data includes class descriptors. There's
391 * an optional status endpoint on the control interface.
392 *
393 * This should interop with whatever the 2.4 "CDCEther.c" driver
394 * (by Brad Hards) talked with, with more functionality.
395 */
396
speed_change(struct usbnet * dev,__le32 * speeds)397 static void speed_change(struct usbnet *dev, __le32 *speeds)
398 {
399 dev->tx_speed = __le32_to_cpu(speeds[0]);
400 dev->rx_speed = __le32_to_cpu(speeds[1]);
401 }
402
usbnet_cdc_status(struct usbnet * dev,struct urb * urb)403 void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
404 {
405 struct usb_cdc_notification *event;
406
407 if (urb->actual_length < sizeof(*event))
408 return;
409
410 /* SPEED_CHANGE can get split into two 8-byte packets */
411 if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
412 speed_change(dev, (__le32 *) urb->transfer_buffer);
413 return;
414 }
415
416 event = urb->transfer_buffer;
417 switch (event->bNotificationType) {
418 case USB_CDC_NOTIFY_NETWORK_CONNECTION:
419 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
420 event->wValue ? "on" : "off");
421 if (netif_carrier_ok(dev->net) != !!event->wValue)
422 usbnet_link_change(dev, !!event->wValue, 0);
423 break;
424 case USB_CDC_NOTIFY_SPEED_CHANGE: /* tx/rx rates */
425 netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
426 urb->actual_length);
427 if (urb->actual_length != (sizeof(*event) + 8))
428 set_bit(EVENT_STS_SPLIT, &dev->flags);
429 else
430 speed_change(dev, (__le32 *) &event[1]);
431 break;
432 /* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
433 * but there are no standard formats for the response data.
434 */
435 default:
436 netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
437 event->bNotificationType);
438 break;
439 }
440 }
441 EXPORT_SYMBOL_GPL(usbnet_cdc_status);
442
usbnet_cdc_bind(struct usbnet * dev,struct usb_interface * intf)443 int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
444 {
445 int status;
446 struct cdc_state *info = (void *) &dev->data;
447
448 BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
449 < sizeof(struct cdc_state)));
450
451 status = usbnet_ether_cdc_bind(dev, intf);
452 if (status < 0)
453 return status;
454
455 status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
456 if (status < 0) {
457 usb_set_intfdata(info->data, NULL);
458 usb_driver_release_interface(driver_of(intf), info->data);
459 return status;
460 }
461
462 return 0;
463 }
464 EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
465
usbnet_cdc_zte_bind(struct usbnet * dev,struct usb_interface * intf)466 static int usbnet_cdc_zte_bind(struct usbnet *dev, struct usb_interface *intf)
467 {
468 int status = usbnet_cdc_bind(dev, intf);
469
470 if (!status && (dev->net->dev_addr[0] & 0x02))
471 eth_hw_addr_random(dev->net);
472
473 return status;
474 }
475
476 /* Make sure packets have correct destination MAC address
477 *
478 * A firmware bug observed on some devices (ZTE MF823/831/910) is that the
479 * device sends packets with a static, bogus, random MAC address (event if
480 * device MAC address has been updated). Always set MAC address to that of the
481 * device.
482 */
usbnet_cdc_zte_rx_fixup(struct usbnet * dev,struct sk_buff * skb)483 int usbnet_cdc_zte_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
484 {
485 if (skb->len < ETH_HLEN || !(skb->data[0] & 0x02))
486 return 1;
487
488 skb_reset_mac_header(skb);
489 ether_addr_copy(eth_hdr(skb)->h_dest, dev->net->dev_addr);
490
491 return 1;
492 }
493 EXPORT_SYMBOL_GPL(usbnet_cdc_zte_rx_fixup);
494
495 /* Ensure correct link state
496 *
497 * Some devices (ZTE MF823/831/910) export two carrier on notifications when
498 * connected. This causes the link state to be incorrect. Work around this by
499 * always setting the state to off, then on.
500 */
usbnet_cdc_zte_status(struct usbnet * dev,struct urb * urb)501 static void usbnet_cdc_zte_status(struct usbnet *dev, struct urb *urb)
502 {
503 struct usb_cdc_notification *event;
504
505 if (urb->actual_length < sizeof(*event))
506 return;
507
508 event = urb->transfer_buffer;
509
510 if (event->bNotificationType != USB_CDC_NOTIFY_NETWORK_CONNECTION) {
511 usbnet_cdc_status(dev, urb);
512 return;
513 }
514
515 netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
516 event->wValue ? "on" : "off");
517
518 if (event->wValue &&
519 netif_carrier_ok(dev->net))
520 netif_carrier_off(dev->net);
521
522 usbnet_link_change(dev, !!event->wValue, 0);
523 }
524
525 static const struct driver_info cdc_info = {
526 .description = "CDC Ethernet Device",
527 .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
528 .bind = usbnet_cdc_bind,
529 .unbind = usbnet_cdc_unbind,
530 .status = usbnet_cdc_status,
531 .set_rx_mode = usbnet_cdc_update_filter,
532 .manage_power = usbnet_manage_power,
533 };
534
535 static const struct driver_info zte_cdc_info = {
536 .description = "ZTE CDC Ethernet Device",
537 .flags = FLAG_ETHER | FLAG_POINTTOPOINT,
538 .bind = usbnet_cdc_zte_bind,
539 .unbind = usbnet_cdc_unbind,
540 .status = usbnet_cdc_zte_status,
541 .set_rx_mode = usbnet_cdc_update_filter,
542 .manage_power = usbnet_manage_power,
543 .rx_fixup = usbnet_cdc_zte_rx_fixup,
544 };
545
546 static const struct driver_info wwan_info = {
547 .description = "Mobile Broadband Network Device",
548 .flags = FLAG_WWAN,
549 .bind = usbnet_cdc_bind,
550 .unbind = usbnet_cdc_unbind,
551 .status = usbnet_cdc_status,
552 .set_rx_mode = usbnet_cdc_update_filter,
553 .manage_power = usbnet_manage_power,
554 };
555
556 /*-------------------------------------------------------------------------*/
557
558 #define HUAWEI_VENDOR_ID 0x12D1
559 #define NOVATEL_VENDOR_ID 0x1410
560 #define ZTE_VENDOR_ID 0x19D2
561 #define DELL_VENDOR_ID 0x413C
562 #define REALTEK_VENDOR_ID 0x0bda
563 #define SAMSUNG_VENDOR_ID 0x04e8
564 #define LENOVO_VENDOR_ID 0x17ef
565 #define LINKSYS_VENDOR_ID 0x13b1
566 #define NVIDIA_VENDOR_ID 0x0955
567 #define HP_VENDOR_ID 0x03f0
568 #define MICROSOFT_VENDOR_ID 0x045e
569 #define UBLOX_VENDOR_ID 0x1546
570 #define TPLINK_VENDOR_ID 0x2357
571 #define AQUANTIA_VENDOR_ID 0x2eca
572 #define ASIX_VENDOR_ID 0x0b95
573
574 static const struct usb_device_id products[] = {
575 /* BLACKLIST !!
576 *
577 * First blacklist any products that are egregiously nonconformant
578 * with the CDC Ethernet specs. Minor braindamage we cope with; when
579 * they're not even trying, needing a separate driver is only the first
580 * of the differences to show up.
581 */
582
583 #define ZAURUS_MASTER_INTERFACE \
584 .bInterfaceClass = USB_CLASS_COMM, \
585 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
586 .bInterfaceProtocol = USB_CDC_PROTO_NONE
587
588 #define ZAURUS_FAKE_INTERFACE \
589 .bInterfaceClass = USB_CLASS_COMM, \
590 .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, \
591 .bInterfaceProtocol = USB_CDC_PROTO_NONE
592
593 /* SA-1100 based Sharp Zaurus ("collie"), or compatible;
594 * wire-incompatible with true CDC Ethernet implementations.
595 * (And, it seems, needlessly so...)
596 */
597 {
598 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
599 | USB_DEVICE_ID_MATCH_DEVICE,
600 .idVendor = 0x04DD,
601 .idProduct = 0x8004,
602 ZAURUS_MASTER_INTERFACE,
603 .driver_info = 0,
604 },
605
606 /* PXA-25x based Sharp Zaurii. Note that it seems some of these
607 * (later models especially) may have shipped only with firmware
608 * advertising false "CDC MDLM" compatibility ... but we're not
609 * clear which models did that, so for now let's assume the worst.
610 */
611 {
612 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
613 | USB_DEVICE_ID_MATCH_DEVICE,
614 .idVendor = 0x04DD,
615 .idProduct = 0x8005, /* A-300 */
616 ZAURUS_MASTER_INTERFACE,
617 .driver_info = 0,
618 }, {
619 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
620 | USB_DEVICE_ID_MATCH_DEVICE,
621 .idVendor = 0x04DD,
622 .idProduct = 0x8005, /* A-300 */
623 ZAURUS_FAKE_INTERFACE,
624 .driver_info = 0,
625 }, {
626 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
627 | USB_DEVICE_ID_MATCH_DEVICE,
628 .idVendor = 0x04DD,
629 .idProduct = 0x8006, /* B-500/SL-5600 */
630 ZAURUS_MASTER_INTERFACE,
631 .driver_info = 0,
632 }, {
633 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
634 | USB_DEVICE_ID_MATCH_DEVICE,
635 .idVendor = 0x04DD,
636 .idProduct = 0x8006, /* B-500/SL-5600 */
637 ZAURUS_FAKE_INTERFACE,
638 .driver_info = 0,
639 }, {
640 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
641 | USB_DEVICE_ID_MATCH_DEVICE,
642 .idVendor = 0x04DD,
643 .idProduct = 0x8007, /* C-700 */
644 ZAURUS_MASTER_INTERFACE,
645 .driver_info = 0,
646 }, {
647 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
648 | USB_DEVICE_ID_MATCH_DEVICE,
649 .idVendor = 0x04DD,
650 .idProduct = 0x8007, /* C-700 */
651 ZAURUS_FAKE_INTERFACE,
652 .driver_info = 0,
653 }, {
654 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
655 | USB_DEVICE_ID_MATCH_DEVICE,
656 .idVendor = 0x04DD,
657 .idProduct = 0x9031, /* C-750 C-760 */
658 ZAURUS_MASTER_INTERFACE,
659 .driver_info = 0,
660 }, {
661 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
662 | USB_DEVICE_ID_MATCH_DEVICE,
663 .idVendor = 0x04DD,
664 .idProduct = 0x9032, /* SL-6000 */
665 ZAURUS_MASTER_INTERFACE,
666 .driver_info = 0,
667 }, {
668 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
669 | USB_DEVICE_ID_MATCH_DEVICE,
670 .idVendor = 0x04DD,
671 .idProduct = 0x9032, /* SL-6000 */
672 ZAURUS_FAKE_INTERFACE,
673 .driver_info = 0,
674 }, {
675 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
676 | USB_DEVICE_ID_MATCH_DEVICE,
677 .idVendor = 0x04DD,
678 /* reported with some C860 units */
679 .idProduct = 0x9050, /* C-860 */
680 ZAURUS_MASTER_INTERFACE,
681 .driver_info = 0,
682 },
683
684 /* Olympus has some models with a Zaurus-compatible option.
685 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
686 */
687 {
688 .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
689 | USB_DEVICE_ID_MATCH_DEVICE,
690 .idVendor = 0x07B4,
691 .idProduct = 0x0F02, /* R-1000 */
692 ZAURUS_MASTER_INTERFACE,
693 .driver_info = 0,
694 },
695
696 /* LG Electronics VL600 wants additional headers on every frame */
697 {
698 USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
699 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
700 .driver_info = 0,
701 },
702
703 /* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
704 {
705 USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
706 USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
707 .driver_info = 0,
708 },
709
710 /* Novatel USB551L and MC551 - handled by qmi_wwan */
711 {
712 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
713 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
714 .driver_info = 0,
715 },
716
717 /* Novatel E362 - handled by qmi_wwan */
718 {
719 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
720 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
721 .driver_info = 0,
722 },
723
724 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
725 {
726 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
727 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
728 .driver_info = 0,
729 },
730
731 /* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
732 {
733 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
734 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
735 .driver_info = 0,
736 },
737
738 /* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
739 {
740 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
741 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
742 .driver_info = 0,
743 },
744
745 /* Novatel Expedite E371 - handled by qmi_wwan */
746 {
747 USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
748 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
749 .driver_info = 0,
750 },
751
752 /* HP lt2523 (Novatel E371) - handled by qmi_wwan */
753 {
754 USB_DEVICE_AND_INTERFACE_INFO(HP_VENDOR_ID, 0x421d, USB_CLASS_COMM,
755 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
756 .driver_info = 0,
757 },
758
759 /* AnyDATA ADU960S - handled by qmi_wwan */
760 {
761 USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
762 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
763 .driver_info = 0,
764 },
765
766 /* Huawei E1820 - handled by qmi_wwan */
767 {
768 USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
769 .driver_info = 0,
770 },
771
772 /* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
773 {
774 USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
775 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
776 .driver_info = 0,
777 },
778
779 /* Lenovo Powered USB-C Travel Hub (4X90S92381, based on Realtek RTL8153) */
780 {
781 USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x721e, USB_CLASS_COMM,
782 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
783 .driver_info = 0,
784 },
785
786 /* Aquantia AQtion USB to 5GbE Controller (based on AQC111U) */
787 {
788 USB_DEVICE_AND_INTERFACE_INFO(AQUANTIA_VENDOR_ID, 0xc101,
789 USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
790 USB_CDC_PROTO_NONE),
791 .driver_info = 0,
792 },
793
794 /* ASIX USB 3.1 Gen1 to 5G Multi-Gigabit Ethernet Adapter(based on AQC111U) */
795 {
796 USB_DEVICE_AND_INTERFACE_INFO(ASIX_VENDOR_ID, 0x2790, USB_CLASS_COMM,
797 USB_CDC_SUBCLASS_ETHERNET,
798 USB_CDC_PROTO_NONE),
799 .driver_info = 0,
800 },
801
802 /* ASIX USB 3.1 Gen1 to 2.5G Multi-Gigabit Ethernet Adapter(based on AQC112U) */
803 {
804 USB_DEVICE_AND_INTERFACE_INFO(ASIX_VENDOR_ID, 0x2791, USB_CLASS_COMM,
805 USB_CDC_SUBCLASS_ETHERNET,
806 USB_CDC_PROTO_NONE),
807 .driver_info = 0,
808 },
809
810 /* USB-C 3.1 to 5GBASE-T Ethernet Adapter (based on AQC111U) */
811 {
812 USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0xe05a, USB_CLASS_COMM,
813 USB_CDC_SUBCLASS_ETHERNET,
814 USB_CDC_PROTO_NONE),
815 .driver_info = 0,
816 },
817
818 /* QNAP QNA-UC5G1T USB to 5GbE Adapter (based on AQC111U) */
819 {
820 USB_DEVICE_AND_INTERFACE_INFO(0x1c04, 0x0015, USB_CLASS_COMM,
821 USB_CDC_SUBCLASS_ETHERNET,
822 USB_CDC_PROTO_NONE),
823 .driver_info = 0,
824 },
825
826 /* WHITELIST!!!
827 *
828 * CDC Ether uses two interfaces, not necessarily consecutive.
829 * We match the main interface, ignoring the optional device
830 * class so we could handle devices that aren't exclusively
831 * CDC ether.
832 *
833 * NOTE: this match must come AFTER entries blacklisting devices
834 * because of bugs/quirks in a given product (like Zaurus, above).
835 */
836 {
837 /* ZTE (Vodafone) K3805-Z */
838 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
839 USB_CDC_SUBCLASS_ETHERNET,
840 USB_CDC_PROTO_NONE),
841 .driver_info = (unsigned long)&wwan_info,
842 }, {
843 /* ZTE (Vodafone) K3806-Z */
844 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
845 USB_CDC_SUBCLASS_ETHERNET,
846 USB_CDC_PROTO_NONE),
847 .driver_info = (unsigned long)&wwan_info,
848 }, {
849 /* ZTE (Vodafone) K4510-Z */
850 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
851 USB_CDC_SUBCLASS_ETHERNET,
852 USB_CDC_PROTO_NONE),
853 .driver_info = (unsigned long)&wwan_info,
854 }, {
855 /* ZTE (Vodafone) K3770-Z */
856 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
857 USB_CDC_SUBCLASS_ETHERNET,
858 USB_CDC_PROTO_NONE),
859 .driver_info = (unsigned long)&wwan_info,
860 }, {
861 /* ZTE (Vodafone) K3772-Z */
862 USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
863 USB_CDC_SUBCLASS_ETHERNET,
864 USB_CDC_PROTO_NONE),
865 .driver_info = (unsigned long)&wwan_info,
866 }, {
867 /* Telit modules */
868 USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
869 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
870 .driver_info = (kernel_ulong_t) &wwan_info,
871 }, {
872 /* Dell DW5580 modules */
873 USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x81ba, USB_CLASS_COMM,
874 USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
875 .driver_info = (kernel_ulong_t)&wwan_info,
876 }, {
877 /* Huawei ME906 and ME909 */
878 USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x15c1, USB_CLASS_COMM,
879 USB_CDC_SUBCLASS_ETHERNET,
880 USB_CDC_PROTO_NONE),
881 .driver_info = (unsigned long)&wwan_info,
882 }, {
883 /* ZTE modules */
884 USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, USB_CLASS_COMM,
885 USB_CDC_SUBCLASS_ETHERNET,
886 USB_CDC_PROTO_NONE),
887 .driver_info = (unsigned long)&zte_cdc_info,
888 }, {
889 /* U-blox TOBY-L2 */
890 USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1143, USB_CLASS_COMM,
891 USB_CDC_SUBCLASS_ETHERNET,
892 USB_CDC_PROTO_NONE),
893 .driver_info = (unsigned long)&wwan_info,
894 }, {
895 /* U-blox SARA-U2 */
896 USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1104, USB_CLASS_COMM,
897 USB_CDC_SUBCLASS_ETHERNET,
898 USB_CDC_PROTO_NONE),
899 .driver_info = (unsigned long)&wwan_info,
900 }, {
901 /* U-blox LARA-R6 01B */
902 USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1313, USB_CLASS_COMM,
903 USB_CDC_SUBCLASS_ETHERNET,
904 USB_CDC_PROTO_NONE),
905 .driver_info = (unsigned long)&wwan_info,
906 }, {
907 /* U-blox LARA-L6 */
908 USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1343, USB_CLASS_COMM,
909 USB_CDC_SUBCLASS_ETHERNET,
910 USB_CDC_PROTO_NONE),
911 .driver_info = (unsigned long)&wwan_info,
912 }, {
913 /* Cinterion PLS8 modem by GEMALTO */
914 USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x0061, USB_CLASS_COMM,
915 USB_CDC_SUBCLASS_ETHERNET,
916 USB_CDC_PROTO_NONE),
917 .driver_info = (unsigned long)&wwan_info,
918 }, {
919 /* Cinterion AHS3 modem by GEMALTO */
920 USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x0055, USB_CLASS_COMM,
921 USB_CDC_SUBCLASS_ETHERNET,
922 USB_CDC_PROTO_NONE),
923 .driver_info = (unsigned long)&wwan_info,
924 }, {
925 /* Cinterion PLS62-W modem by GEMALTO/THALES */
926 USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x005b, USB_CLASS_COMM,
927 USB_CDC_SUBCLASS_ETHERNET,
928 USB_CDC_PROTO_NONE),
929 .driver_info = (unsigned long)&wwan_info,
930 }, {
931 /* Cinterion PLS83/PLS63 modem by GEMALTO/THALES */
932 USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x0069, USB_CLASS_COMM,
933 USB_CDC_SUBCLASS_ETHERNET,
934 USB_CDC_PROTO_NONE),
935 .driver_info = (unsigned long)&wwan_info,
936 }, {
937 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
938 USB_CDC_PROTO_NONE),
939 .driver_info = (unsigned long) &cdc_info,
940 }, {
941 USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
942 USB_CDC_PROTO_NONE),
943 .driver_info = (unsigned long)&wwan_info,
944
945 }, {
946 /* Various Huawei modems with a network port like the UMG1831 */
947 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
948 USB_CDC_SUBCLASS_ETHERNET, 255),
949 .driver_info = (unsigned long)&wwan_info,
950 },
951 { }, /* END */
952 };
953 MODULE_DEVICE_TABLE(usb, products);
954
955 static struct usb_driver cdc_driver = {
956 .name = "cdc_ether",
957 .id_table = products,
958 .probe = usbnet_probe,
959 .disconnect = usbnet_disconnect,
960 .suspend = usbnet_suspend,
961 .resume = usbnet_resume,
962 .reset_resume = usbnet_resume,
963 .supports_autosuspend = 1,
964 .disable_hub_initiated_lpm = 1,
965 };
966
967 module_usb_driver(cdc_driver);
968
969 MODULE_AUTHOR("David Brownell");
970 MODULE_DESCRIPTION("USB CDC Ethernet devices");
971 MODULE_LICENSE("GPL");
972