1 /******************************************************************* 2 * This file is part of the Emulex Linux Device Driver for * 3 * Fibre Channel Host Bus Adapters. * 4 * Copyright (C) 2017-2025 Broadcom. All Rights Reserved. The term * 5 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * 6 * Copyright (C) 2004-2013 Emulex. All rights reserved. * 7 * EMULEX and SLI are trademarks of Emulex. * 8 * www.broadcom.com * 9 * * 10 * This program is free software; you can redistribute it and/or * 11 * modify it under the terms of version 2 of the GNU General * 12 * Public License as published by the Free Software Foundation. * 13 * This program is distributed in the hope that it will be useful. * 14 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * 15 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * 16 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * 17 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * 18 * TO BE LEGALLY INVALID. See the GNU General Public License for * 19 * more details, a copy of which can be found in the file COPYING * 20 * included with this package. * 21 *******************************************************************/ 22 23 #define FC_MAX_HOLD_RSCN 32 /* max number of deferred RSCNs */ 24 #define FC_MAX_NS_RSP 64512 /* max size NameServer rsp */ 25 #define FC_MAXLOOP 126 /* max devices supported on a fc loop */ 26 #define LPFC_DISC_FLOGI_TMO 10 /* Discovery FLOGI ratov */ 27 28 29 /* This is the protocol dependent definition for a Node List Entry. 30 * This is used by Fibre Channel protocol to support FCP. 31 */ 32 33 /* worker thread events */ 34 enum lpfc_work_type { 35 LPFC_EVT_ONLINE, 36 LPFC_EVT_OFFLINE_PREP, 37 LPFC_EVT_OFFLINE, 38 LPFC_EVT_WARM_START, 39 LPFC_EVT_KILL, 40 LPFC_EVT_ELS_RETRY, 41 LPFC_EVT_DEV_LOSS, 42 LPFC_EVT_FASTPATH_MGMT_EVT, 43 LPFC_EVT_RESET_HBA, 44 LPFC_EVT_RECOVER_PORT 45 }; 46 47 /* structure used to queue event to the discovery tasklet */ 48 struct lpfc_work_evt { 49 struct list_head evt_listp; 50 void *evt_arg1; 51 void *evt_arg2; 52 enum lpfc_work_type evt; 53 }; 54 55 struct lpfc_scsi_check_condition_event; 56 struct lpfc_scsi_varqueuedepth_event; 57 struct lpfc_scsi_event_header; 58 struct lpfc_fabric_event_header; 59 struct lpfc_fcprdchkerr_event; 60 61 /* structure used for sending events from fast path */ 62 struct lpfc_fast_path_event { 63 struct lpfc_work_evt work_evt; 64 struct lpfc_vport *vport; 65 union { 66 struct lpfc_scsi_check_condition_event check_cond_evt; 67 struct lpfc_scsi_varqueuedepth_event queue_depth_evt; 68 struct lpfc_scsi_event_header scsi_evt; 69 struct lpfc_fabric_event_header fabric_evt; 70 struct lpfc_fcprdchkerr_event read_check_error; 71 } un; 72 }; 73 74 #define LPFC_SLI4_MAX_XRI 1024 /* Used to make the ndlp's xri_bitmap */ 75 #define XRI_BITMAP_ULONGS (LPFC_SLI4_MAX_XRI / BITS_PER_LONG) 76 struct lpfc_node_rrqs { 77 unsigned long xri_bitmap[XRI_BITMAP_ULONGS]; 78 }; 79 80 struct lpfc_enc_info { 81 u8 status; /* encryption status for session */ 82 u8 level; /* CNSA encryption level */ 83 }; 84 85 enum lpfc_fc4_xpt_flags { 86 NLP_XPT_REGD = 0x1, 87 SCSI_XPT_REGD = 0x2, 88 NVME_XPT_REGD = 0x4, 89 NVME_XPT_UNREG_WAIT = 0x8, 90 NLP_XPT_HAS_HH = 0x10 91 }; 92 93 enum lpfc_nlp_save_flags { /* mask bits */ 94 /* devloss occurred during recovery */ 95 NLP_IN_RECOV_POST_DEV_LOSS, 96 /* wait for outstanding LOGO to cmpl */ 97 NLP_WAIT_FOR_LOGO, 98 /* wait for outstanding DA_ID to finish */ 99 NLP_WAIT_FOR_DA_ID 100 }; 101 102 struct lpfc_nodelist { 103 struct list_head nlp_listp; 104 struct serv_parm fc_sparam; /* buffer for service params */ 105 struct lpfc_name nlp_portname; 106 struct lpfc_name nlp_nodename; 107 108 spinlock_t lock; /* Node management lock */ 109 110 unsigned long nlp_flag; /* entry flags */ 111 uint32_t nlp_DID; /* FC D_ID of entry */ 112 uint32_t nlp_last_elscmd; /* Last ELS cmd sent */ 113 uint16_t nlp_type; 114 #define NLP_FC_NODE 0x1 /* entry is an FC node */ 115 #define NLP_FABRIC 0x4 /* entry rep a Fabric entity */ 116 #define NLP_FCP_TARGET 0x8 /* entry is an FCP target */ 117 #define NLP_FCP_INITIATOR 0x10 /* entry is an FCP Initiator */ 118 #define NLP_NVME_TARGET 0x20 /* entry is a NVME Target */ 119 #define NLP_NVME_INITIATOR 0x40 /* entry is a NVME Initiator */ 120 #define NLP_NVME_DISCOVERY 0x80 /* entry has NVME disc srvc */ 121 122 uint16_t nlp_fc4_type; /* FC types node supports. */ 123 /* Assigned from GID_FF, only 124 * FCP (0x8) and NVME (0x28) 125 * supported. 126 */ 127 #define NLP_FC4_NONE 0x0 128 #define NLP_FC4_FCP 0x1 /* FC4 Type FCP (value x8)) */ 129 #define NLP_FC4_NVME 0x2 /* FC4 TYPE NVME (value x28) */ 130 131 uint16_t nlp_rpi; 132 uint16_t nlp_state; /* state transition indicator */ 133 uint16_t nlp_prev_state; /* state transition indicator */ 134 uint16_t nlp_xri; /* output exchange id for RPI */ 135 uint16_t nlp_sid; /* scsi id */ 136 #define NLP_NO_SID 0xffff 137 uint16_t nlp_maxframe; /* Max RCV frame size */ 138 uint8_t nlp_class_sup; /* Supported Classes */ 139 uint8_t nlp_retry; /* used for ELS retries */ 140 uint8_t nlp_fcp_info; /* class info, bits 0-3 */ 141 #define NLP_FCP_2_DEVICE 0x10 /* FCP-2 device */ 142 u8 nlp_nvme_info; /* NVME NSLER Support */ 143 uint8_t vmid_support; /* destination VMID support */ 144 #define NLP_NVME_NSLER 0x1 /* NVME NSLER device */ 145 146 struct lpfc_enc_info nlp_enc_info; /* Encryption information struct */ 147 148 struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */ 149 struct lpfc_hba *phba; 150 struct fc_rport *rport; /* scsi_transport_fc port structure */ 151 struct lpfc_nvme_rport *nrport; /* nvme transport rport struct. */ 152 struct lpfc_vport *vport; 153 struct lpfc_work_evt els_retry_evt; 154 struct lpfc_work_evt dev_loss_evt; 155 struct lpfc_work_evt recovery_evt; 156 struct kref kref; 157 atomic_t cmd_pending; 158 uint32_t cmd_qdepth; 159 unsigned long last_change_time; 160 unsigned long *active_rrqs_xri_bitmap; 161 uint32_t fc4_prli_sent; 162 163 /* flags to keep ndlp alive until special conditions are met */ 164 unsigned long save_flags; 165 166 enum lpfc_fc4_xpt_flags fc4_xpt_flags; 167 168 uint32_t nvme_fb_size; /* NVME target's supported byte cnt */ 169 #define NVME_FB_BIT_SHIFT 9 /* PRLI Rsp first burst in 512B units. */ 170 uint32_t nlp_defer_did; 171 172 /* These wait objects are NPIV specific. These IOs must complete 173 * synchronously. 174 */ 175 wait_queue_head_t *logo_waitq; 176 wait_queue_head_t *da_id_waitq; 177 }; 178 179 struct lpfc_node_rrq { 180 struct list_head list; 181 uint16_t xritag; 182 uint16_t send_rrq; 183 uint16_t rxid; 184 uint32_t nlp_DID; /* FC D_ID of entry */ 185 struct lpfc_vport *vport; 186 unsigned long rrq_stop_time; 187 }; 188 189 #define lpfc_ndlp_check_qdepth(phba, ndlp) \ 190 (ndlp->cmd_qdepth < phba->sli4_hba.max_cfg_param.max_xri) 191 192 /* nlp_flag mask bits */ 193 enum lpfc_nlp_flag { 194 NLP_IGNR_REG_CMPL = 0, /* Rcvd rscn before we cmpl reg login */ 195 NLP_REG_LOGIN_SEND = 1, /* sent reglogin to adapter */ 196 NLP_SUPPRESS_RSP = 4, /* Remote NPort supports suppress rsp */ 197 NLP_PLOGI_SND = 5, /* sent PLOGI request for this entry */ 198 NLP_PRLI_SND = 6, /* sent PRLI request for this entry */ 199 NLP_ADISC_SND = 7, /* sent ADISC request for this entry */ 200 NLP_LOGO_SND = 8, /* sent LOGO request for this entry */ 201 NLP_RNID_SND = 10, /* sent RNID request for this entry */ 202 NLP_NVMET_RECOV = 12, /* NVMET auditing node for recovery. */ 203 NLP_UNREG_INP = 15, /* UNREG_RPI cmd is in progress */ 204 NLP_DROPPED = 16, /* Init ref count has been dropped */ 205 NLP_DELAY_TMO = 17, /* delay timeout is running for node */ 206 NLP_NPR_2B_DISC = 18, /* node is included in num_disc_nodes */ 207 NLP_RCV_PLOGI = 19, /* Rcv'ed PLOGI from remote system */ 208 NLP_LOGO_ACC = 20, /* Process LOGO after ACC completes */ 209 NLP_TGT_NO_SCSIID = 21, /* good PRLI but no binding for scsid */ 210 NLP_ISSUE_LOGO = 22, /* waiting to issue a LOGO */ 211 NLP_IN_DEV_LOSS = 23, /* devloss in progress */ 212 NLP_ACC_REGLOGIN = 24, /* Issue Reg Login after successful 213 ACC */ 214 NLP_NPR_ADISC = 25, /* Issue ADISC when dq'ed from 215 NPR list */ 216 NLP_RM_DFLT_RPI = 26, /* need to remove leftover dflt RPI */ 217 NLP_NODEV_REMOVE = 27, /* Defer removal till discovery ends */ 218 NLP_FLOGI_DFR_ACC = 28, /* FLOGI LS_ACC was Deferred */ 219 NLP_SC_REQ = 29, /* Target requires authentication */ 220 NLP_FIRSTBURST = 30, /* Target supports FirstBurst */ 221 NLP_RPI_REGISTERED = 31 /* nlp_rpi is valid */ 222 }; 223 224 /* There are 4 different double linked lists nodelist entries can reside on. 225 * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used 226 * when Link Up discovery or Registered State Change Notification (RSCN) 227 * processing is needed. Each list holds the nodes that require a PLOGI or 228 * ADISC Extended Link Service (ELS) request. These lists keep track of the 229 * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected 230 * by Link Up) event. The unmapped_list contains all nodes that have 231 * successfully logged into at the Fibre Channel level. The 232 * mapped_list will contain all nodes that are mapped FCP targets. 233 * 234 * The bind list is a list of undiscovered (potentially non-existent) nodes 235 * that we have saved binding information on. This information is used when 236 * nodes transition from the unmapped to the mapped list. 237 */ 238 239 /* Defines for nlp_state */ 240 #define NLP_STE_UNUSED_NODE 0x0 /* node is just allocated */ 241 #define NLP_STE_PLOGI_ISSUE 0x1 /* PLOGI was sent to NL_PORT */ 242 #define NLP_STE_ADISC_ISSUE 0x2 /* ADISC was sent to NL_PORT */ 243 #define NLP_STE_REG_LOGIN_ISSUE 0x3 /* REG_LOGIN was issued for NL_PORT */ 244 #define NLP_STE_PRLI_ISSUE 0x4 /* PRLI was sent to NL_PORT */ 245 #define NLP_STE_LOGO_ISSUE 0x5 /* LOGO was sent to NL_PORT */ 246 #define NLP_STE_UNMAPPED_NODE 0x6 /* PRLI completed from NL_PORT */ 247 #define NLP_STE_MAPPED_NODE 0x7 /* Identified as a FCP Target */ 248 #define NLP_STE_NPR_NODE 0x8 /* NPort disappeared */ 249 #define NLP_STE_MAX_STATE 0x9 250 #define NLP_STE_FREED_NODE 0xff /* node entry was freed to MEM_NLP */ 251 252 /* For UNUSED_NODE state, the node has just been allocated. 253 * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on 254 * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list 255 * and put on the unmapped list. For ADISC processing, the node is taken off 256 * the ADISC list and placed on either the mapped or unmapped list (depending 257 * on its previous state). Once on the unmapped list, a PRLI is issued and the 258 * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is 259 * changed to PRLI_COMPL. If the completion indicates a mapped 260 * node, the node is taken off the unmapped list. The binding list is checked 261 * for a valid binding, or a binding is automatically assigned. If binding 262 * assignment is unsuccessful, the node is left on the unmapped list. If 263 * binding assignment is successful, the associated binding list entry (if 264 * any) is removed, and the node is placed on the mapped list. 265 */ 266 /* 267 * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped 268 * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers 269 * expire, all effected nodes will receive a DEVICE_RM event. 270 */ 271 /* 272 * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists 273 * to either the ADISC or PLOGI list. After a Nameserver query or ALPA loopmap 274 * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to / 275 * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated, 276 * we will first process the ADISC list. 32 entries are processed initially and 277 * ADISC is initited for each one. Completions / Events for each node are 278 * funnelled thru the state machine. As each node finishes ADISC processing, it 279 * starts ADISC for any nodes waiting for ADISC processing. If no nodes are 280 * waiting, and the ADISC list count is identically 0, then we are done. For 281 * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we 282 * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI 283 * list. 32 entries are processed initially and PLOGI is initited for each one. 284 * Completions / Events for each node are funnelled thru the state machine. As 285 * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting 286 * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is 287 * identically 0, then we are done. We have now completed discovery / RSCN 288 * handling. Upon completion, ALL nodes should be on either the mapped or 289 * unmapped lists. 290 */ 291 292 /* Defines for Node List Entry Events that could happen */ 293 #define NLP_EVT_RCV_PLOGI 0x0 /* Rcv'd an ELS PLOGI command */ 294 #define NLP_EVT_RCV_PRLI 0x1 /* Rcv'd an ELS PRLI command */ 295 #define NLP_EVT_RCV_LOGO 0x2 /* Rcv'd an ELS LOGO command */ 296 #define NLP_EVT_RCV_ADISC 0x3 /* Rcv'd an ELS ADISC command */ 297 #define NLP_EVT_RCV_PDISC 0x4 /* Rcv'd an ELS PDISC command */ 298 #define NLP_EVT_RCV_PRLO 0x5 /* Rcv'd an ELS PRLO command */ 299 #define NLP_EVT_CMPL_PLOGI 0x6 /* Sent an ELS PLOGI command */ 300 #define NLP_EVT_CMPL_PRLI 0x7 /* Sent an ELS PRLI command */ 301 #define NLP_EVT_CMPL_LOGO 0x8 /* Sent an ELS LOGO command */ 302 #define NLP_EVT_CMPL_ADISC 0x9 /* Sent an ELS ADISC command */ 303 #define NLP_EVT_CMPL_REG_LOGIN 0xa /* REG_LOGIN mbox cmd completed */ 304 #define NLP_EVT_DEVICE_RM 0xb /* Device not found in NS / ALPAmap */ 305 #define NLP_EVT_DEVICE_RECOVERY 0xc /* Device existence unknown */ 306 #define NLP_EVT_MAX_EVENT 0xd 307 #define NLP_EVT_NOTHING_PENDING 0xff 308