1 /* bnx2x_reg.h: Qlogic Everest network driver.
2 *
3 * Copyright (c) 2007-2013 Broadcom Corporation
4 * Copyright (c) 2014 QLogic Corporation
5 * All rights reserved
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation.
10 *
11 * The registers description starts with the register Access type followed
12 * by size in bits. For example [RW 32]. The access types are:
13 * R - Read only
14 * RC - Clear on read
15 * RW - Read/Write
16 * ST - Statistics register (clear on read)
17 * W - Write only
18 * WB - Wide bus register - the size is over 32 bits and it should be
19 * read/write in consecutive 32 bits accesses
20 * WR - Write Clear (write 1 to clear the bit)
21 *
22 */
23 #ifndef BNX2X_REG_H
24 #define BNX2X_REG_H
25
26 #define ATC_ATC_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
27 #define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS (0x1<<2)
28 #define ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU (0x1<<5)
29 #define ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT (0x1<<3)
30 #define ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR (0x1<<4)
31 #define ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND (0x1<<1)
32 /* [RW 1] Initiate the ATC array - reset all the valid bits */
33 #define ATC_REG_ATC_INIT_ARRAY 0x1100b8
34 /* [R 1] ATC initialization done */
35 #define ATC_REG_ATC_INIT_DONE 0x1100bc
36 /* [RC 6] Interrupt register #0 read clear */
37 #define ATC_REG_ATC_INT_STS_CLR 0x1101c0
38 /* [RW 5] Parity mask register #0 read/write */
39 #define ATC_REG_ATC_PRTY_MASK 0x1101d8
40 /* [R 5] Parity register #0 read */
41 #define ATC_REG_ATC_PRTY_STS 0x1101cc
42 /* [RC 5] Parity register #0 read clear */
43 #define ATC_REG_ATC_PRTY_STS_CLR 0x1101d0
44 /* [RW 19] Interrupt mask register #0 read/write */
45 #define BRB1_REG_BRB1_INT_MASK 0x60128
46 /* [R 19] Interrupt register #0 read */
47 #define BRB1_REG_BRB1_INT_STS 0x6011c
48 /* [RW 4] Parity mask register #0 read/write */
49 #define BRB1_REG_BRB1_PRTY_MASK 0x60138
50 /* [R 4] Parity register #0 read */
51 #define BRB1_REG_BRB1_PRTY_STS 0x6012c
52 /* [RC 4] Parity register #0 read clear */
53 #define BRB1_REG_BRB1_PRTY_STS_CLR 0x60130
54 /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
55 * address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
56 * BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning -
57 * following reset the first rbc access to this reg must be write; there can
58 * be no more rbc writes after the first one; there can be any number of rbc
59 * read following the first write; rbc access not following these rules will
60 * result in hang condition. */
61 #define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200
62 /* [RW 10] The number of free blocks below which the full signal to class 0
63 * is asserted */
64 #define BRB1_REG_FULL_0_XOFF_THRESHOLD_0 0x601d0
65 #define BRB1_REG_FULL_0_XOFF_THRESHOLD_1 0x60230
66 /* [RW 11] The number of free blocks above which the full signal to class 0
67 * is de-asserted */
68 #define BRB1_REG_FULL_0_XON_THRESHOLD_0 0x601d4
69 #define BRB1_REG_FULL_0_XON_THRESHOLD_1 0x60234
70 /* [RW 11] The number of free blocks below which the full signal to class 1
71 * is asserted */
72 #define BRB1_REG_FULL_1_XOFF_THRESHOLD_0 0x601d8
73 #define BRB1_REG_FULL_1_XOFF_THRESHOLD_1 0x60238
74 /* [RW 11] The number of free blocks above which the full signal to class 1
75 * is de-asserted */
76 #define BRB1_REG_FULL_1_XON_THRESHOLD_0 0x601dc
77 #define BRB1_REG_FULL_1_XON_THRESHOLD_1 0x6023c
78 /* [RW 11] The number of free blocks below which the full signal to the LB
79 * port is asserted */
80 #define BRB1_REG_FULL_LB_XOFF_THRESHOLD 0x601e0
81 /* [RW 10] The number of free blocks above which the full signal to the LB
82 * port is de-asserted */
83 #define BRB1_REG_FULL_LB_XON_THRESHOLD 0x601e4
84 /* [RW 10] The number of free blocks above which the High_llfc signal to
85 interface #n is de-asserted. */
86 #define BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD_0 0x6014c
87 /* [RW 10] The number of free blocks below which the High_llfc signal to
88 interface #n is asserted. */
89 #define BRB1_REG_HIGH_LLFC_LOW_THRESHOLD_0 0x6013c
90 /* [RW 11] The number of blocks guarantied for the LB port */
91 #define BRB1_REG_LB_GUARANTIED 0x601ec
92 /* [RW 11] The hysteresis on the guarantied buffer space for the Lb port
93 * before signaling XON. */
94 #define BRB1_REG_LB_GUARANTIED_HYST 0x60264
95 /* [RW 24] LL RAM data. */
96 #define BRB1_REG_LL_RAM 0x61000
97 /* [RW 10] The number of free blocks above which the Low_llfc signal to
98 interface #n is de-asserted. */
99 #define BRB1_REG_LOW_LLFC_HIGH_THRESHOLD_0 0x6016c
100 /* [RW 10] The number of free blocks below which the Low_llfc signal to
101 interface #n is asserted. */
102 #define BRB1_REG_LOW_LLFC_LOW_THRESHOLD_0 0x6015c
103 /* [RW 11] The number of blocks guarantied for class 0 in MAC 0. The
104 * register is applicable only when per_class_guaranty_mode is set. */
105 #define BRB1_REG_MAC_0_CLASS_0_GUARANTIED 0x60244
106 /* [RW 11] The hysteresis on the guarantied buffer space for class 0 in MAC
107 * 1 before signaling XON. The register is applicable only when
108 * per_class_guaranty_mode is set. */
109 #define BRB1_REG_MAC_0_CLASS_0_GUARANTIED_HYST 0x60254
110 /* [RW 11] The number of blocks guarantied for class 1 in MAC 0. The
111 * register is applicable only when per_class_guaranty_mode is set. */
112 #define BRB1_REG_MAC_0_CLASS_1_GUARANTIED 0x60248
113 /* [RW 11] The hysteresis on the guarantied buffer space for class 1in MAC 0
114 * before signaling XON. The register is applicable only when
115 * per_class_guaranty_mode is set. */
116 #define BRB1_REG_MAC_0_CLASS_1_GUARANTIED_HYST 0x60258
117 /* [RW 11] The number of blocks guarantied for class 0in MAC1.The register
118 * is applicable only when per_class_guaranty_mode is set. */
119 #define BRB1_REG_MAC_1_CLASS_0_GUARANTIED 0x6024c
120 /* [RW 11] The hysteresis on the guarantied buffer space for class 0 in MAC
121 * 1 before signaling XON. The register is applicable only when
122 * per_class_guaranty_mode is set. */
123 #define BRB1_REG_MAC_1_CLASS_0_GUARANTIED_HYST 0x6025c
124 /* [RW 11] The number of blocks guarantied for class 1 in MAC 1. The
125 * register is applicable only when per_class_guaranty_mode is set. */
126 #define BRB1_REG_MAC_1_CLASS_1_GUARANTIED 0x60250
127 /* [RW 11] The hysteresis on the guarantied buffer space for class 1 in MAC
128 * 1 before signaling XON. The register is applicable only when
129 * per_class_guaranty_mode is set. */
130 #define BRB1_REG_MAC_1_CLASS_1_GUARANTIED_HYST 0x60260
131 /* [RW 11] The number of blocks guarantied for the MAC port. The register is
132 * applicable only when per_class_guaranty_mode is reset. */
133 #define BRB1_REG_MAC_GUARANTIED_0 0x601e8
134 #define BRB1_REG_MAC_GUARANTIED_1 0x60240
135 /* [R 24] The number of full blocks. */
136 #define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090
137 /* [ST 32] The number of cycles that the write_full signal towards MAC #0
138 was asserted. */
139 #define BRB1_REG_NUM_OF_FULL_CYCLES_0 0x600c8
140 #define BRB1_REG_NUM_OF_FULL_CYCLES_1 0x600cc
141 #define BRB1_REG_NUM_OF_FULL_CYCLES_4 0x600d8
142 /* [ST 32] The number of cycles that the pause signal towards MAC #0 was
143 asserted. */
144 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_0 0x600b8
145 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_1 0x600bc
146 /* [RW 10] The number of free blocks below which the pause signal to class 0
147 * is asserted */
148 #define BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 0x601c0
149 #define BRB1_REG_PAUSE_0_XOFF_THRESHOLD_1 0x60220
150 /* [RW 11] The number of free blocks above which the pause signal to class 0
151 * is de-asserted */
152 #define BRB1_REG_PAUSE_0_XON_THRESHOLD_0 0x601c4
153 #define BRB1_REG_PAUSE_0_XON_THRESHOLD_1 0x60224
154 /* [RW 11] The number of free blocks below which the pause signal to class 1
155 * is asserted */
156 #define BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0 0x601c8
157 #define BRB1_REG_PAUSE_1_XOFF_THRESHOLD_1 0x60228
158 /* [RW 11] The number of free blocks above which the pause signal to class 1
159 * is de-asserted */
160 #define BRB1_REG_PAUSE_1_XON_THRESHOLD_0 0x601cc
161 #define BRB1_REG_PAUSE_1_XON_THRESHOLD_1 0x6022c
162 /* [RW 10] Write client 0: De-assert pause threshold. Not Functional */
163 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078
164 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c
165 /* [RW 10] Write client 0: Assert pause threshold. */
166 #define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068
167 /* [RW 1] Indicates if to use per-class guaranty mode (new mode) or per-MAC
168 * guaranty mode (backwards-compatible mode). 0=per-MAC guaranty mode (BC
169 * mode). 1=per-class guaranty mode (new mode). */
170 #define BRB1_REG_PER_CLASS_GUARANTY_MODE 0x60268
171 /* [R 24] The number of full blocks occpied by port. */
172 #define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094
173 /* [RW 1] Reset the design by software. */
174 #define BRB1_REG_SOFT_RESET 0x600dc
175 /* [R 5] Used to read the value of the XX protection CAM occupancy counter. */
176 #define CCM_REG_CAM_OCCUP 0xd0188
177 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
178 acknowledge output is deasserted; all other signals are treated as usual;
179 if 1 - normal activity. */
180 #define CCM_REG_CCM_CFC_IFEN 0xd003c
181 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
182 disregarded; valid is deasserted; all other signals are treated as usual;
183 if 1 - normal activity. */
184 #define CCM_REG_CCM_CQM_IFEN 0xd000c
185 /* [RW 1] If set the Q index; received from the QM is inserted to event ID.
186 Otherwise 0 is inserted. */
187 #define CCM_REG_CCM_CQM_USE_Q 0xd00c0
188 /* [RW 11] Interrupt mask register #0 read/write */
189 #define CCM_REG_CCM_INT_MASK 0xd01e4
190 /* [R 11] Interrupt register #0 read */
191 #define CCM_REG_CCM_INT_STS 0xd01d8
192 /* [RW 27] Parity mask register #0 read/write */
193 #define CCM_REG_CCM_PRTY_MASK 0xd01f4
194 /* [R 27] Parity register #0 read */
195 #define CCM_REG_CCM_PRTY_STS 0xd01e8
196 /* [RC 27] Parity register #0 read clear */
197 #define CCM_REG_CCM_PRTY_STS_CLR 0xd01ec
198 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
199 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
200 Is used to determine the number of the AG context REG-pairs written back;
201 when the input message Reg1WbFlg isn't set. */
202 #define CCM_REG_CCM_REG0_SZ 0xd00c4
203 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
204 disregarded; valid is deasserted; all other signals are treated as usual;
205 if 1 - normal activity. */
206 #define CCM_REG_CCM_STORM0_IFEN 0xd0004
207 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
208 disregarded; valid is deasserted; all other signals are treated as usual;
209 if 1 - normal activity. */
210 #define CCM_REG_CCM_STORM1_IFEN 0xd0008
211 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
212 disregarded; valid output is deasserted; all other signals are treated as
213 usual; if 1 - normal activity. */
214 #define CCM_REG_CDU_AG_RD_IFEN 0xd0030
215 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
216 are disregarded; all other signals are treated as usual; if 1 - normal
217 activity. */
218 #define CCM_REG_CDU_AG_WR_IFEN 0xd002c
219 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
220 disregarded; valid output is deasserted; all other signals are treated as
221 usual; if 1 - normal activity. */
222 #define CCM_REG_CDU_SM_RD_IFEN 0xd0038
223 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
224 input is disregarded; all other signals are treated as usual; if 1 -
225 normal activity. */
226 #define CCM_REG_CDU_SM_WR_IFEN 0xd0034
227 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
228 the initial credit value; read returns the current value of the credit
229 counter. Must be initialized to 1 at start-up. */
230 #define CCM_REG_CFC_INIT_CRD 0xd0204
231 /* [RW 2] Auxiliary counter flag Q number 1. */
232 #define CCM_REG_CNT_AUX1_Q 0xd00c8
233 /* [RW 2] Auxiliary counter flag Q number 2. */
234 #define CCM_REG_CNT_AUX2_Q 0xd00cc
235 /* [RW 28] The CM header value for QM request (primary). */
236 #define CCM_REG_CQM_CCM_HDR_P 0xd008c
237 /* [RW 28] The CM header value for QM request (secondary). */
238 #define CCM_REG_CQM_CCM_HDR_S 0xd0090
239 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
240 acknowledge output is deasserted; all other signals are treated as usual;
241 if 1 - normal activity. */
242 #define CCM_REG_CQM_CCM_IFEN 0xd0014
243 /* [RW 6] QM output initial credit. Max credit available - 32. Write writes
244 the initial credit value; read returns the current value of the credit
245 counter. Must be initialized to 32 at start-up. */
246 #define CCM_REG_CQM_INIT_CRD 0xd020c
247 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
248 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
249 prioritised); 2 stands for weight 2; tc. */
250 #define CCM_REG_CQM_P_WEIGHT 0xd00b8
251 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
252 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
253 prioritised); 2 stands for weight 2; tc. */
254 #define CCM_REG_CQM_S_WEIGHT 0xd00bc
255 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
256 acknowledge output is deasserted; all other signals are treated as usual;
257 if 1 - normal activity. */
258 #define CCM_REG_CSDM_IFEN 0xd0018
259 /* [RC 1] Set when the message length mismatch (relative to last indication)
260 at the SDM interface is detected. */
261 #define CCM_REG_CSDM_LENGTH_MIS 0xd0170
262 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
263 weight 8 (the most prioritised); 1 stands for weight 1(least
264 prioritised); 2 stands for weight 2; tc. */
265 #define CCM_REG_CSDM_WEIGHT 0xd00b4
266 /* [RW 28] The CM header for QM formatting in case of an error in the QM
267 inputs. */
268 #define CCM_REG_ERR_CCM_HDR 0xd0094
269 /* [RW 8] The Event ID in case the input message ErrorFlg is set. */
270 #define CCM_REG_ERR_EVNT_ID 0xd0098
271 /* [RW 8] FIC0 output initial credit. Max credit available - 255. Write
272 writes the initial credit value; read returns the current value of the
273 credit counter. Must be initialized to 64 at start-up. */
274 #define CCM_REG_FIC0_INIT_CRD 0xd0210
275 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
276 writes the initial credit value; read returns the current value of the
277 credit counter. Must be initialized to 64 at start-up. */
278 #define CCM_REG_FIC1_INIT_CRD 0xd0214
279 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
280 - strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr;
281 ~ccm_registers_gr_ld0_pr.gr_ld0_pr and
282 ~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and
283 outputs to STORM: aggregation; load FIC0; load FIC1 and store. */
284 #define CCM_REG_GR_ARB_TYPE 0xd015c
285 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
286 highest priority is 3. It is supposed; that the Store channel priority is
287 the complement to 4 of the rest priorities - Aggregation channel; Load
288 (FIC0) channel and Load (FIC1). */
289 #define CCM_REG_GR_LD0_PR 0xd0164
290 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
291 highest priority is 3. It is supposed; that the Store channel priority is
292 the complement to 4 of the rest priorities - Aggregation channel; Load
293 (FIC0) channel and Load (FIC1). */
294 #define CCM_REG_GR_LD1_PR 0xd0168
295 /* [RW 2] General flags index. */
296 #define CCM_REG_INV_DONE_Q 0xd0108
297 /* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM
298 context and sent to STORM; for a specific connection type. The double
299 REG-pairs are used in order to align to STORM context row size of 128
300 bits. The offset of these data in the STORM context is always 0. Index
301 _(0..15) stands for the connection type (one of 16). */
302 #define CCM_REG_N_SM_CTX_LD_0 0xd004c
303 #define CCM_REG_N_SM_CTX_LD_1 0xd0050
304 #define CCM_REG_N_SM_CTX_LD_2 0xd0054
305 #define CCM_REG_N_SM_CTX_LD_3 0xd0058
306 #define CCM_REG_N_SM_CTX_LD_4 0xd005c
307 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
308 acknowledge output is deasserted; all other signals are treated as usual;
309 if 1 - normal activity. */
310 #define CCM_REG_PBF_IFEN 0xd0028
311 /* [RC 1] Set when the message length mismatch (relative to last indication)
312 at the pbf interface is detected. */
313 #define CCM_REG_PBF_LENGTH_MIS 0xd0180
314 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
315 weight 8 (the most prioritised); 1 stands for weight 1(least
316 prioritised); 2 stands for weight 2; tc. */
317 #define CCM_REG_PBF_WEIGHT 0xd00ac
318 #define CCM_REG_PHYS_QNUM1_0 0xd0134
319 #define CCM_REG_PHYS_QNUM1_1 0xd0138
320 #define CCM_REG_PHYS_QNUM2_0 0xd013c
321 #define CCM_REG_PHYS_QNUM2_1 0xd0140
322 #define CCM_REG_PHYS_QNUM3_0 0xd0144
323 #define CCM_REG_PHYS_QNUM3_1 0xd0148
324 #define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114
325 #define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118
326 #define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c
327 #define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120
328 #define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124
329 #define CCM_REG_QOS_PHYS_QNUM2_1 0xd0128
330 #define CCM_REG_QOS_PHYS_QNUM3_0 0xd012c
331 #define CCM_REG_QOS_PHYS_QNUM3_1 0xd0130
332 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
333 disregarded; acknowledge output is deasserted; all other signals are
334 treated as usual; if 1 - normal activity. */
335 #define CCM_REG_STORM_CCM_IFEN 0xd0010
336 /* [RC 1] Set when the message length mismatch (relative to last indication)
337 at the STORM interface is detected. */
338 #define CCM_REG_STORM_LENGTH_MIS 0xd016c
339 /* [RW 3] The weight of the STORM input in the WRR (Weighted Round robin)
340 mechanism. 0 stands for weight 8 (the most prioritised); 1 stands for
341 weight 1(least prioritised); 2 stands for weight 2 (more prioritised);
342 tc. */
343 #define CCM_REG_STORM_WEIGHT 0xd009c
344 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
345 disregarded; acknowledge output is deasserted; all other signals are
346 treated as usual; if 1 - normal activity. */
347 #define CCM_REG_TSEM_IFEN 0xd001c
348 /* [RC 1] Set when the message length mismatch (relative to last indication)
349 at the tsem interface is detected. */
350 #define CCM_REG_TSEM_LENGTH_MIS 0xd0174
351 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
352 weight 8 (the most prioritised); 1 stands for weight 1(least
353 prioritised); 2 stands for weight 2; tc. */
354 #define CCM_REG_TSEM_WEIGHT 0xd00a0
355 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
356 disregarded; acknowledge output is deasserted; all other signals are
357 treated as usual; if 1 - normal activity. */
358 #define CCM_REG_USEM_IFEN 0xd0024
359 /* [RC 1] Set when message length mismatch (relative to last indication) at
360 the usem interface is detected. */
361 #define CCM_REG_USEM_LENGTH_MIS 0xd017c
362 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
363 weight 8 (the most prioritised); 1 stands for weight 1(least
364 prioritised); 2 stands for weight 2; tc. */
365 #define CCM_REG_USEM_WEIGHT 0xd00a8
366 /* [RW 1] Input xsem Interface enable. If 0 - the valid input is
367 disregarded; acknowledge output is deasserted; all other signals are
368 treated as usual; if 1 - normal activity. */
369 #define CCM_REG_XSEM_IFEN 0xd0020
370 /* [RC 1] Set when the message length mismatch (relative to last indication)
371 at the xsem interface is detected. */
372 #define CCM_REG_XSEM_LENGTH_MIS 0xd0178
373 /* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
374 weight 8 (the most prioritised); 1 stands for weight 1(least
375 prioritised); 2 stands for weight 2; tc. */
376 #define CCM_REG_XSEM_WEIGHT 0xd00a4
377 /* [RW 19] Indirect access to the descriptor table of the XX protection
378 mechanism. The fields are: [5:0] - message length; [12:6] - message
379 pointer; 18:13] - next pointer. */
380 #define CCM_REG_XX_DESCR_TABLE 0xd0300
381 #define CCM_REG_XX_DESCR_TABLE_SIZE 24
382 /* [R 7] Used to read the value of XX protection Free counter. */
383 #define CCM_REG_XX_FREE 0xd0184
384 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
385 of the Input Stage XX protection buffer by the XX protection pending
386 messages. Max credit available - 127. Write writes the initial credit
387 value; read returns the current value of the credit counter. Must be
388 initialized to maximum XX protected message size - 2 at start-up. */
389 #define CCM_REG_XX_INIT_CRD 0xd0220
390 /* [RW 7] The maximum number of pending messages; which may be stored in XX
391 protection. At read the ~ccm_registers_xx_free.xx_free counter is read.
392 At write comprises the start value of the ~ccm_registers_xx_free.xx_free
393 counter. */
394 #define CCM_REG_XX_MSG_NUM 0xd0224
395 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
396 #define CCM_REG_XX_OVFL_EVNT_ID 0xd0044
397 /* [RW 18] Indirect access to the XX table of the XX protection mechanism.
398 The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] -
399 header pointer. */
400 #define CCM_REG_XX_TABLE 0xd0280
401 #define CDU_REG_CDU_CHK_MASK0 0x101000
402 #define CDU_REG_CDU_CHK_MASK1 0x101004
403 #define CDU_REG_CDU_CONTROL0 0x101008
404 #define CDU_REG_CDU_DEBUG 0x101010
405 #define CDU_REG_CDU_GLOBAL_PARAMS 0x101020
406 /* [RW 7] Interrupt mask register #0 read/write */
407 #define CDU_REG_CDU_INT_MASK 0x10103c
408 /* [R 7] Interrupt register #0 read */
409 #define CDU_REG_CDU_INT_STS 0x101030
410 /* [RW 5] Parity mask register #0 read/write */
411 #define CDU_REG_CDU_PRTY_MASK 0x10104c
412 /* [R 5] Parity register #0 read */
413 #define CDU_REG_CDU_PRTY_STS 0x101040
414 /* [RC 5] Parity register #0 read clear */
415 #define CDU_REG_CDU_PRTY_STS_CLR 0x101044
416 /* [RC 32] logging of error data in case of a CDU load error:
417 {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
418 ype_error; ctual_active; ctual_compressed_context}; */
419 #define CDU_REG_ERROR_DATA 0x101014
420 /* [WB 216] L1TT ram access. each entry has the following format :
421 {mrege_regions[7:0]; ffset12[5:0]...offset0[5:0];
422 ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]} */
423 #define CDU_REG_L1TT 0x101800
424 /* [WB 24] MATT ram access. each entry has the following
425 format:{RegionLength[11:0]; egionOffset[11:0]} */
426 #define CDU_REG_MATT 0x101100
427 /* [RW 1] when this bit is set the CDU operates in e1hmf mode */
428 #define CDU_REG_MF_MODE 0x101050
429 /* [R 1] indication the initializing the activity counter by the hardware
430 was done. */
431 #define CFC_REG_AC_INIT_DONE 0x104078
432 /* [RW 13] activity counter ram access */
433 #define CFC_REG_ACTIVITY_COUNTER 0x104400
434 #define CFC_REG_ACTIVITY_COUNTER_SIZE 256
435 /* [R 1] indication the initializing the cams by the hardware was done. */
436 #define CFC_REG_CAM_INIT_DONE 0x10407c
437 /* [RW 2] Interrupt mask register #0 read/write */
438 #define CFC_REG_CFC_INT_MASK 0x104108
439 /* [R 2] Interrupt register #0 read */
440 #define CFC_REG_CFC_INT_STS 0x1040fc
441 /* [RC 2] Interrupt register #0 read clear */
442 #define CFC_REG_CFC_INT_STS_CLR 0x104100
443 /* [RW 4] Parity mask register #0 read/write */
444 #define CFC_REG_CFC_PRTY_MASK 0x104118
445 /* [R 4] Parity register #0 read */
446 #define CFC_REG_CFC_PRTY_STS 0x10410c
447 /* [RC 4] Parity register #0 read clear */
448 #define CFC_REG_CFC_PRTY_STS_CLR 0x104110
449 /* [RW 21] CID cam access (21:1 - Data; alid - 0) */
450 #define CFC_REG_CID_CAM 0x104800
451 #define CFC_REG_CONTROL0 0x104028
452 #define CFC_REG_DEBUG0 0x104050
453 /* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error
454 vector) whether the cfc should be disabled upon it */
455 #define CFC_REG_DISABLE_ON_ERROR 0x104044
456 /* [RC 14] CFC error vector. when the CFC detects an internal error it will
457 set one of these bits. the bit description can be found in CFC
458 specifications */
459 #define CFC_REG_ERROR_VECTOR 0x10403c
460 /* [WB 93] LCID info ram access */
461 #define CFC_REG_INFO_RAM 0x105000
462 #define CFC_REG_INFO_RAM_SIZE 1024
463 #define CFC_REG_INIT_REG 0x10404c
464 #define CFC_REG_INTERFACES 0x104058
465 /* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this
466 field allows changing the priorities of the weighted-round-robin arbiter
467 which selects which CFC load client should be served next */
468 #define CFC_REG_LCREQ_WEIGHTS 0x104084
469 /* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */
470 #define CFC_REG_LINK_LIST 0x104c00
471 #define CFC_REG_LINK_LIST_SIZE 256
472 /* [R 1] indication the initializing the link list by the hardware was done. */
473 #define CFC_REG_LL_INIT_DONE 0x104074
474 /* [R 9] Number of allocated LCIDs which are at empty state */
475 #define CFC_REG_NUM_LCIDS_ALLOC 0x104020
476 /* [R 9] Number of Arriving LCIDs in Link List Block */
477 #define CFC_REG_NUM_LCIDS_ARRIVING 0x104004
478 #define CFC_REG_NUM_LCIDS_INSIDE_PF 0x104120
479 /* [R 9] Number of Leaving LCIDs in Link List Block */
480 #define CFC_REG_NUM_LCIDS_LEAVING 0x104018
481 #define CFC_REG_WEAK_ENABLE_PF 0x104124
482 /* [RW 8] The event id for aggregated interrupt 0 */
483 #define CSDM_REG_AGG_INT_EVENT_0 0xc2038
484 #define CSDM_REG_AGG_INT_EVENT_10 0xc2060
485 #define CSDM_REG_AGG_INT_EVENT_11 0xc2064
486 #define CSDM_REG_AGG_INT_EVENT_12 0xc2068
487 #define CSDM_REG_AGG_INT_EVENT_13 0xc206c
488 #define CSDM_REG_AGG_INT_EVENT_14 0xc2070
489 #define CSDM_REG_AGG_INT_EVENT_15 0xc2074
490 #define CSDM_REG_AGG_INT_EVENT_16 0xc2078
491 #define CSDM_REG_AGG_INT_EVENT_2 0xc2040
492 #define CSDM_REG_AGG_INT_EVENT_3 0xc2044
493 #define CSDM_REG_AGG_INT_EVENT_4 0xc2048
494 #define CSDM_REG_AGG_INT_EVENT_5 0xc204c
495 #define CSDM_REG_AGG_INT_EVENT_6 0xc2050
496 #define CSDM_REG_AGG_INT_EVENT_7 0xc2054
497 #define CSDM_REG_AGG_INT_EVENT_8 0xc2058
498 #define CSDM_REG_AGG_INT_EVENT_9 0xc205c
499 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
500 or auto-mask-mode (1) */
501 #define CSDM_REG_AGG_INT_MODE_10 0xc21e0
502 #define CSDM_REG_AGG_INT_MODE_11 0xc21e4
503 #define CSDM_REG_AGG_INT_MODE_12 0xc21e8
504 #define CSDM_REG_AGG_INT_MODE_13 0xc21ec
505 #define CSDM_REG_AGG_INT_MODE_14 0xc21f0
506 #define CSDM_REG_AGG_INT_MODE_15 0xc21f4
507 #define CSDM_REG_AGG_INT_MODE_16 0xc21f8
508 #define CSDM_REG_AGG_INT_MODE_6 0xc21d0
509 #define CSDM_REG_AGG_INT_MODE_7 0xc21d4
510 #define CSDM_REG_AGG_INT_MODE_8 0xc21d8
511 #define CSDM_REG_AGG_INT_MODE_9 0xc21dc
512 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
513 #define CSDM_REG_CFC_RSP_START_ADDR 0xc2008
514 /* [RW 16] The maximum value of the completion counter #0 */
515 #define CSDM_REG_CMP_COUNTER_MAX0 0xc201c
516 /* [RW 16] The maximum value of the completion counter #1 */
517 #define CSDM_REG_CMP_COUNTER_MAX1 0xc2020
518 /* [RW 16] The maximum value of the completion counter #2 */
519 #define CSDM_REG_CMP_COUNTER_MAX2 0xc2024
520 /* [RW 16] The maximum value of the completion counter #3 */
521 #define CSDM_REG_CMP_COUNTER_MAX3 0xc2028
522 /* [RW 13] The start address in the internal RAM for the completion
523 counters. */
524 #define CSDM_REG_CMP_COUNTER_START_ADDR 0xc200c
525 /* [RW 32] Interrupt mask register #0 read/write */
526 #define CSDM_REG_CSDM_INT_MASK_0 0xc229c
527 #define CSDM_REG_CSDM_INT_MASK_1 0xc22ac
528 /* [R 32] Interrupt register #0 read */
529 #define CSDM_REG_CSDM_INT_STS_0 0xc2290
530 #define CSDM_REG_CSDM_INT_STS_1 0xc22a0
531 /* [RW 11] Parity mask register #0 read/write */
532 #define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
533 /* [R 11] Parity register #0 read */
534 #define CSDM_REG_CSDM_PRTY_STS 0xc22b0
535 /* [RC 11] Parity register #0 read clear */
536 #define CSDM_REG_CSDM_PRTY_STS_CLR 0xc22b4
537 #define CSDM_REG_ENABLE_IN1 0xc2238
538 #define CSDM_REG_ENABLE_IN2 0xc223c
539 #define CSDM_REG_ENABLE_OUT1 0xc2240
540 #define CSDM_REG_ENABLE_OUT2 0xc2244
541 /* [RW 4] The initial number of messages that can be sent to the pxp control
542 interface without receiving any ACK. */
543 #define CSDM_REG_INIT_CREDIT_PXP_CTRL 0xc24bc
544 /* [ST 32] The number of ACK after placement messages received */
545 #define CSDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc227c
546 /* [ST 32] The number of packet end messages received from the parser */
547 #define CSDM_REG_NUM_OF_PKT_END_MSG 0xc2274
548 /* [ST 32] The number of requests received from the pxp async if */
549 #define CSDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc2278
550 /* [ST 32] The number of commands received in queue 0 */
551 #define CSDM_REG_NUM_OF_Q0_CMD 0xc2248
552 /* [ST 32] The number of commands received in queue 10 */
553 #define CSDM_REG_NUM_OF_Q10_CMD 0xc226c
554 /* [ST 32] The number of commands received in queue 11 */
555 #define CSDM_REG_NUM_OF_Q11_CMD 0xc2270
556 /* [ST 32] The number of commands received in queue 1 */
557 #define CSDM_REG_NUM_OF_Q1_CMD 0xc224c
558 /* [ST 32] The number of commands received in queue 3 */
559 #define CSDM_REG_NUM_OF_Q3_CMD 0xc2250
560 /* [ST 32] The number of commands received in queue 4 */
561 #define CSDM_REG_NUM_OF_Q4_CMD 0xc2254
562 /* [ST 32] The number of commands received in queue 5 */
563 #define CSDM_REG_NUM_OF_Q5_CMD 0xc2258
564 /* [ST 32] The number of commands received in queue 6 */
565 #define CSDM_REG_NUM_OF_Q6_CMD 0xc225c
566 /* [ST 32] The number of commands received in queue 7 */
567 #define CSDM_REG_NUM_OF_Q7_CMD 0xc2260
568 /* [ST 32] The number of commands received in queue 8 */
569 #define CSDM_REG_NUM_OF_Q8_CMD 0xc2264
570 /* [ST 32] The number of commands received in queue 9 */
571 #define CSDM_REG_NUM_OF_Q9_CMD 0xc2268
572 /* [RW 13] The start address in the internal RAM for queue counters */
573 #define CSDM_REG_Q_COUNTER_START_ADDR 0xc2010
574 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
575 #define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc2548
576 /* [R 1] parser fifo empty in sdm_sync block */
577 #define CSDM_REG_SYNC_PARSER_EMPTY 0xc2550
578 /* [R 1] parser serial fifo empty in sdm_sync block */
579 #define CSDM_REG_SYNC_SYNC_EMPTY 0xc2558
580 /* [RW 32] Tick for timer counter. Applicable only when
581 ~csdm_registers_timer_tick_enable.timer_tick_enable =1 */
582 #define CSDM_REG_TIMER_TICK 0xc2000
583 /* [RW 5] The number of time_slots in the arbitration cycle */
584 #define CSEM_REG_ARB_CYCLE_SIZE 0x200034
585 /* [RW 3] The source that is associated with arbitration element 0. Source
586 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
587 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
588 #define CSEM_REG_ARB_ELEMENT0 0x200020
589 /* [RW 3] The source that is associated with arbitration element 1. Source
590 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
591 sleeping thread with priority 1; 4- sleeping thread with priority 2.
592 Could not be equal to register ~csem_registers_arb_element0.arb_element0 */
593 #define CSEM_REG_ARB_ELEMENT1 0x200024
594 /* [RW 3] The source that is associated with arbitration element 2. Source
595 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
596 sleeping thread with priority 1; 4- sleeping thread with priority 2.
597 Could not be equal to register ~csem_registers_arb_element0.arb_element0
598 and ~csem_registers_arb_element1.arb_element1 */
599 #define CSEM_REG_ARB_ELEMENT2 0x200028
600 /* [RW 3] The source that is associated with arbitration element 3. Source
601 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
602 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
603 not be equal to register ~csem_registers_arb_element0.arb_element0 and
604 ~csem_registers_arb_element1.arb_element1 and
605 ~csem_registers_arb_element2.arb_element2 */
606 #define CSEM_REG_ARB_ELEMENT3 0x20002c
607 /* [RW 3] The source that is associated with arbitration element 4. Source
608 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
609 sleeping thread with priority 1; 4- sleeping thread with priority 2.
610 Could not be equal to register ~csem_registers_arb_element0.arb_element0
611 and ~csem_registers_arb_element1.arb_element1 and
612 ~csem_registers_arb_element2.arb_element2 and
613 ~csem_registers_arb_element3.arb_element3 */
614 #define CSEM_REG_ARB_ELEMENT4 0x200030
615 /* [RW 32] Interrupt mask register #0 read/write */
616 #define CSEM_REG_CSEM_INT_MASK_0 0x200110
617 #define CSEM_REG_CSEM_INT_MASK_1 0x200120
618 /* [R 32] Interrupt register #0 read */
619 #define CSEM_REG_CSEM_INT_STS_0 0x200104
620 #define CSEM_REG_CSEM_INT_STS_1 0x200114
621 /* [RW 32] Parity mask register #0 read/write */
622 #define CSEM_REG_CSEM_PRTY_MASK_0 0x200130
623 #define CSEM_REG_CSEM_PRTY_MASK_1 0x200140
624 /* [R 32] Parity register #0 read */
625 #define CSEM_REG_CSEM_PRTY_STS_0 0x200124
626 #define CSEM_REG_CSEM_PRTY_STS_1 0x200134
627 /* [RC 32] Parity register #0 read clear */
628 #define CSEM_REG_CSEM_PRTY_STS_CLR_0 0x200128
629 #define CSEM_REG_CSEM_PRTY_STS_CLR_1 0x200138
630 #define CSEM_REG_ENABLE_IN 0x2000a4
631 #define CSEM_REG_ENABLE_OUT 0x2000a8
632 /* [RW 32] This address space contains all registers and memories that are
633 placed in SEM_FAST block. The SEM_FAST registers are described in
634 appendix B. In order to access the sem_fast registers the base address
635 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
636 #define CSEM_REG_FAST_MEMORY 0x220000
637 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
638 by the microcode */
639 #define CSEM_REG_FIC0_DISABLE 0x200224
640 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
641 by the microcode */
642 #define CSEM_REG_FIC1_DISABLE 0x200234
643 /* [RW 15] Interrupt table Read and write access to it is not possible in
644 the middle of the work */
645 #define CSEM_REG_INT_TABLE 0x200400
646 /* [ST 24] Statistics register. The number of messages that entered through
647 FIC0 */
648 #define CSEM_REG_MSG_NUM_FIC0 0x200000
649 /* [ST 24] Statistics register. The number of messages that entered through
650 FIC1 */
651 #define CSEM_REG_MSG_NUM_FIC1 0x200004
652 /* [ST 24] Statistics register. The number of messages that were sent to
653 FOC0 */
654 #define CSEM_REG_MSG_NUM_FOC0 0x200008
655 /* [ST 24] Statistics register. The number of messages that were sent to
656 FOC1 */
657 #define CSEM_REG_MSG_NUM_FOC1 0x20000c
658 /* [ST 24] Statistics register. The number of messages that were sent to
659 FOC2 */
660 #define CSEM_REG_MSG_NUM_FOC2 0x200010
661 /* [ST 24] Statistics register. The number of messages that were sent to
662 FOC3 */
663 #define CSEM_REG_MSG_NUM_FOC3 0x200014
664 /* [RW 1] Disables input messages from the passive buffer May be updated
665 during run_time by the microcode */
666 #define CSEM_REG_PAS_DISABLE 0x20024c
667 /* [WB 128] Debug only. Passive buffer memory */
668 #define CSEM_REG_PASSIVE_BUFFER 0x202000
669 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
670 #define CSEM_REG_PRAM 0x240000
671 /* [R 16] Valid sleeping threads indication have bit per thread */
672 #define CSEM_REG_SLEEP_THREADS_VALID 0x20026c
673 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
674 #define CSEM_REG_SLOW_EXT_STORE_EMPTY 0x2002a0
675 /* [RW 16] List of free threads . There is a bit per thread. */
676 #define CSEM_REG_THREADS_LIST 0x2002e4
677 /* [RW 3] The arbitration scheme of time_slot 0 */
678 #define CSEM_REG_TS_0_AS 0x200038
679 /* [RW 3] The arbitration scheme of time_slot 10 */
680 #define CSEM_REG_TS_10_AS 0x200060
681 /* [RW 3] The arbitration scheme of time_slot 11 */
682 #define CSEM_REG_TS_11_AS 0x200064
683 /* [RW 3] The arbitration scheme of time_slot 12 */
684 #define CSEM_REG_TS_12_AS 0x200068
685 /* [RW 3] The arbitration scheme of time_slot 13 */
686 #define CSEM_REG_TS_13_AS 0x20006c
687 /* [RW 3] The arbitration scheme of time_slot 14 */
688 #define CSEM_REG_TS_14_AS 0x200070
689 /* [RW 3] The arbitration scheme of time_slot 15 */
690 #define CSEM_REG_TS_15_AS 0x200074
691 /* [RW 3] The arbitration scheme of time_slot 16 */
692 #define CSEM_REG_TS_16_AS 0x200078
693 /* [RW 3] The arbitration scheme of time_slot 17 */
694 #define CSEM_REG_TS_17_AS 0x20007c
695 /* [RW 3] The arbitration scheme of time_slot 18 */
696 #define CSEM_REG_TS_18_AS 0x200080
697 /* [RW 3] The arbitration scheme of time_slot 1 */
698 #define CSEM_REG_TS_1_AS 0x20003c
699 /* [RW 3] The arbitration scheme of time_slot 2 */
700 #define CSEM_REG_TS_2_AS 0x200040
701 /* [RW 3] The arbitration scheme of time_slot 3 */
702 #define CSEM_REG_TS_3_AS 0x200044
703 /* [RW 3] The arbitration scheme of time_slot 4 */
704 #define CSEM_REG_TS_4_AS 0x200048
705 /* [RW 3] The arbitration scheme of time_slot 5 */
706 #define CSEM_REG_TS_5_AS 0x20004c
707 /* [RW 3] The arbitration scheme of time_slot 6 */
708 #define CSEM_REG_TS_6_AS 0x200050
709 /* [RW 3] The arbitration scheme of time_slot 7 */
710 #define CSEM_REG_TS_7_AS 0x200054
711 /* [RW 3] The arbitration scheme of time_slot 8 */
712 #define CSEM_REG_TS_8_AS 0x200058
713 /* [RW 3] The arbitration scheme of time_slot 9 */
714 #define CSEM_REG_TS_9_AS 0x20005c
715 /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
716 * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
717 #define CSEM_REG_VFPF_ERR_NUM 0x200380
718 /* [RW 1] Parity mask register #0 read/write */
719 #define DBG_REG_DBG_PRTY_MASK 0xc0a8
720 /* [R 1] Parity register #0 read */
721 #define DBG_REG_DBG_PRTY_STS 0xc09c
722 /* [RC 1] Parity register #0 read clear */
723 #define DBG_REG_DBG_PRTY_STS_CLR 0xc0a0
724 /* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The
725 * function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID=0;
726 * 4.Completion function=0; 5.Error handling=0 */
727 #define DMAE_REG_BACKWARD_COMP_EN 0x10207c
728 /* [RW 32] Commands memory. The address to command X; row Y is to calculated
729 as 14*X+Y. */
730 #define DMAE_REG_CMD_MEM 0x102400
731 #define DMAE_REG_CMD_MEM_SIZE 224
732 /* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c
733 initial value is all ones. */
734 #define DMAE_REG_CRC16C_INIT 0x10201c
735 /* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the
736 CRC-16 T10 initial value is all ones. */
737 #define DMAE_REG_CRC16T10_INIT 0x102020
738 /* [RW 2] Interrupt mask register #0 read/write */
739 #define DMAE_REG_DMAE_INT_MASK 0x102054
740 /* [RW 4] Parity mask register #0 read/write */
741 #define DMAE_REG_DMAE_PRTY_MASK 0x102064
742 /* [R 4] Parity register #0 read */
743 #define DMAE_REG_DMAE_PRTY_STS 0x102058
744 /* [RC 4] Parity register #0 read clear */
745 #define DMAE_REG_DMAE_PRTY_STS_CLR 0x10205c
746 /* [RW 1] Command 0 go. */
747 #define DMAE_REG_GO_C0 0x102080
748 /* [RW 1] Command 1 go. */
749 #define DMAE_REG_GO_C1 0x102084
750 /* [RW 1] Command 10 go. */
751 #define DMAE_REG_GO_C10 0x102088
752 /* [RW 1] Command 11 go. */
753 #define DMAE_REG_GO_C11 0x10208c
754 /* [RW 1] Command 12 go. */
755 #define DMAE_REG_GO_C12 0x102090
756 /* [RW 1] Command 13 go. */
757 #define DMAE_REG_GO_C13 0x102094
758 /* [RW 1] Command 14 go. */
759 #define DMAE_REG_GO_C14 0x102098
760 /* [RW 1] Command 15 go. */
761 #define DMAE_REG_GO_C15 0x10209c
762 /* [RW 1] Command 2 go. */
763 #define DMAE_REG_GO_C2 0x1020a0
764 /* [RW 1] Command 3 go. */
765 #define DMAE_REG_GO_C3 0x1020a4
766 /* [RW 1] Command 4 go. */
767 #define DMAE_REG_GO_C4 0x1020a8
768 /* [RW 1] Command 5 go. */
769 #define DMAE_REG_GO_C5 0x1020ac
770 /* [RW 1] Command 6 go. */
771 #define DMAE_REG_GO_C6 0x1020b0
772 /* [RW 1] Command 7 go. */
773 #define DMAE_REG_GO_C7 0x1020b4
774 /* [RW 1] Command 8 go. */
775 #define DMAE_REG_GO_C8 0x1020b8
776 /* [RW 1] Command 9 go. */
777 #define DMAE_REG_GO_C9 0x1020bc
778 /* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge
779 input is disregarded; valid is deasserted; all other signals are treated
780 as usual; if 1 - normal activity. */
781 #define DMAE_REG_GRC_IFEN 0x102008
782 /* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the
783 acknowledge input is disregarded; valid is deasserted; full is asserted;
784 all other signals are treated as usual; if 1 - normal activity. */
785 #define DMAE_REG_PCI_IFEN 0x102004
786 /* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the
787 initial value to the credit counter; related to the address. Read returns
788 the current value of the counter. */
789 #define DMAE_REG_PXP_REQ_INIT_CRD 0x1020c0
790 /* [RW 8] Aggregation command. */
791 #define DORQ_REG_AGG_CMD0 0x170060
792 /* [RW 8] Aggregation command. */
793 #define DORQ_REG_AGG_CMD1 0x170064
794 /* [RW 8] Aggregation command. */
795 #define DORQ_REG_AGG_CMD2 0x170068
796 /* [RW 8] Aggregation command. */
797 #define DORQ_REG_AGG_CMD3 0x17006c
798 /* [RW 28] UCM Header. */
799 #define DORQ_REG_CMHEAD_RX 0x170050
800 /* [RW 32] Doorbell address for RBC doorbells (function 0). */
801 #define DORQ_REG_DB_ADDR0 0x17008c
802 /* [RW 5] Interrupt mask register #0 read/write */
803 #define DORQ_REG_DORQ_INT_MASK 0x170180
804 /* [R 5] Interrupt register #0 read */
805 #define DORQ_REG_DORQ_INT_STS 0x170174
806 /* [RC 5] Interrupt register #0 read clear */
807 #define DORQ_REG_DORQ_INT_STS_CLR 0x170178
808 /* [RW 2] Parity mask register #0 read/write */
809 #define DORQ_REG_DORQ_PRTY_MASK 0x170190
810 /* [R 2] Parity register #0 read */
811 #define DORQ_REG_DORQ_PRTY_STS 0x170184
812 /* [RC 2] Parity register #0 read clear */
813 #define DORQ_REG_DORQ_PRTY_STS_CLR 0x170188
814 /* [RW 8] The address to write the DPM CID to STORM. */
815 #define DORQ_REG_DPM_CID_ADDR 0x170044
816 /* [RW 5] The DPM mode CID extraction offset. */
817 #define DORQ_REG_DPM_CID_OFST 0x170030
818 /* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */
819 #define DORQ_REG_DQ_FIFO_AFULL_TH 0x17007c
820 /* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */
821 #define DORQ_REG_DQ_FIFO_FULL_TH 0x170078
822 /* [R 13] Current value of the DQ FIFO fill level according to following
823 pointer. The range is 0 - 256 FIFO rows; where each row stands for the
824 doorbell. */
825 #define DORQ_REG_DQ_FILL_LVLF 0x1700a4
826 /* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or
827 equal to full threshold; reset on full clear. */
828 #define DORQ_REG_DQ_FULL_ST 0x1700c0
829 /* [RW 28] The value sent to CM header in the case of CFC load error. */
830 #define DORQ_REG_ERR_CMHEAD 0x170058
831 #define DORQ_REG_IF_EN 0x170004
832 #define DORQ_REG_MAX_RVFID_SIZE 0x1701ec
833 #define DORQ_REG_MODE_ACT 0x170008
834 /* [RW 5] The normal mode CID extraction offset. */
835 #define DORQ_REG_NORM_CID_OFST 0x17002c
836 /* [RW 28] TCM Header when only TCP context is loaded. */
837 #define DORQ_REG_NORM_CMHEAD_TX 0x17004c
838 /* [RW 3] The number of simultaneous outstanding requests to Context Fetch
839 Interface. */
840 #define DORQ_REG_OUTST_REQ 0x17003c
841 #define DORQ_REG_PF_USAGE_CNT 0x1701d0
842 #define DORQ_REG_REGN 0x170038
843 /* [R 4] Current value of response A counter credit. Initial credit is
844 configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
845 register. */
846 #define DORQ_REG_RSPA_CRD_CNT 0x1700ac
847 /* [R 4] Current value of response B counter credit. Initial credit is
848 configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
849 register. */
850 #define DORQ_REG_RSPB_CRD_CNT 0x1700b0
851 /* [RW 4] The initial credit at the Doorbell Response Interface. The write
852 writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The
853 read reads this written value. */
854 #define DORQ_REG_RSP_INIT_CRD 0x170048
855 #define DORQ_REG_RSPB_CRD_CNT 0x1700b0
856 #define DORQ_REG_VF_NORM_CID_BASE 0x1701a0
857 #define DORQ_REG_VF_NORM_CID_OFST 0x1701f4
858 #define DORQ_REG_VF_NORM_CID_WND_SIZE 0x1701a4
859 #define DORQ_REG_VF_NORM_MAX_CID_COUNT 0x1701e4
860 #define DORQ_REG_VF_NORM_VF_BASE 0x1701a8
861 /* [RW 10] VF type validation mask value */
862 #define DORQ_REG_VF_TYPE_MASK_0 0x170218
863 /* [RW 17] VF type validation Min MCID value */
864 #define DORQ_REG_VF_TYPE_MAX_MCID_0 0x1702d8
865 /* [RW 17] VF type validation Max MCID value */
866 #define DORQ_REG_VF_TYPE_MIN_MCID_0 0x170298
867 /* [RW 10] VF type validation comp value */
868 #define DORQ_REG_VF_TYPE_VALUE_0 0x170258
869 #define DORQ_REG_VF_USAGE_CT_LIMIT 0x170340
870
871 extern const u32 dmae_reg_go_c[];
872
873 /* [RW 4] Initial activity counter value on the load request; when the
874 shortcut is done. */
875 #define DORQ_REG_SHRT_ACT_CNT 0x170070
876 /* [RW 28] TCM Header when both ULP and TCP context is loaded. */
877 #define DORQ_REG_SHRT_CMHEAD 0x170054
878 #define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4)
879 #define HC_CONFIG_0_REG_BLOCK_DISABLE_0 (0x1<<0)
880 #define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3)
881 #define HC_CONFIG_0_REG_MSI_ATTN_EN_0 (0x1<<7)
882 #define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2)
883 #define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1)
884 #define HC_CONFIG_1_REG_BLOCK_DISABLE_1 (0x1<<0)
885 #define DORQ_REG_VF_USAGE_CNT 0x170320
886 #define HC_REG_AGG_INT_0 0x108050
887 #define HC_REG_AGG_INT_1 0x108054
888 #define HC_REG_ATTN_BIT 0x108120
889 #define HC_REG_ATTN_IDX 0x108100
890 #define HC_REG_ATTN_MSG0_ADDR_L 0x108018
891 #define HC_REG_ATTN_MSG1_ADDR_L 0x108020
892 #define HC_REG_ATTN_NUM_P0 0x108038
893 #define HC_REG_ATTN_NUM_P1 0x10803c
894 #define HC_REG_COMMAND_REG 0x108180
895 #define HC_REG_CONFIG_0 0x108000
896 #define HC_REG_CONFIG_1 0x108004
897 #define HC_REG_FUNC_NUM_P0 0x1080ac
898 #define HC_REG_FUNC_NUM_P1 0x1080b0
899 /* [RW 3] Parity mask register #0 read/write */
900 #define HC_REG_HC_PRTY_MASK 0x1080a0
901 /* [R 3] Parity register #0 read */
902 #define HC_REG_HC_PRTY_STS 0x108094
903 /* [RC 3] Parity register #0 read clear */
904 #define HC_REG_HC_PRTY_STS_CLR 0x108098
905 #define HC_REG_INT_MASK 0x108108
906 #define HC_REG_LEADING_EDGE_0 0x108040
907 #define HC_REG_LEADING_EDGE_1 0x108048
908 #define HC_REG_MAIN_MEMORY 0x108800
909 #define HC_REG_MAIN_MEMORY_SIZE 152
910 #define HC_REG_P0_PROD_CONS 0x108200
911 #define HC_REG_P1_PROD_CONS 0x108400
912 #define HC_REG_PBA_COMMAND 0x108140
913 #define HC_REG_PCI_CONFIG_0 0x108010
914 #define HC_REG_PCI_CONFIG_1 0x108014
915 #define HC_REG_STATISTIC_COUNTERS 0x109000
916 #define HC_REG_TRAILING_EDGE_0 0x108044
917 #define HC_REG_TRAILING_EDGE_1 0x10804c
918 #define HC_REG_UC_RAM_ADDR_0 0x108028
919 #define HC_REG_UC_RAM_ADDR_1 0x108030
920 #define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068
921 #define HC_REG_VQID_0 0x108008
922 #define HC_REG_VQID_1 0x10800c
923 #define IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN (0x1<<1)
924 #define IGU_BLOCK_CONFIGURATION_REG_BLOCK_ENABLE (0x1<<0)
925 #define IGU_REG_ATTENTION_ACK_BITS 0x130108
926 /* [R 4] Debug: attn_fsm */
927 #define IGU_REG_ATTN_FSM 0x130054
928 #define IGU_REG_ATTN_MSG_ADDR_H 0x13011c
929 #define IGU_REG_ATTN_MSG_ADDR_L 0x130120
930 /* [R 4] Debug: [3] - attention write done message is pending (0-no pending;
931 * 1-pending). [2:0] = PFID. Pending means attention message was sent; but
932 * write done didn't receive. */
933 #define IGU_REG_ATTN_WRITE_DONE_PENDING 0x130030
934 #define IGU_REG_BLOCK_CONFIGURATION 0x130000
935 #define IGU_REG_COMMAND_REG_32LSB_DATA 0x130124
936 #define IGU_REG_COMMAND_REG_CTRL 0x13012c
937 /* [WB_R 32] Cleanup bit status per SB. 1 = cleanup is set. 0 = cleanup bit
938 * is clear. The bits in this registers are set and clear via the producer
939 * command. Data valid only in addresses 0-4. all the rest are zero. */
940 #define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP 0x130200
941 /* [R 5] Debug: ctrl_fsm */
942 #define IGU_REG_CTRL_FSM 0x130064
943 /* [R 1] data available for error memory. If this bit is clear do not red
944 * from error_handling_memory. */
945 #define IGU_REG_ERROR_HANDLING_DATA_VALID 0x130130
946 /* [RW 11] Parity mask register #0 read/write */
947 #define IGU_REG_IGU_PRTY_MASK 0x1300a8
948 /* [R 11] Parity register #0 read */
949 #define IGU_REG_IGU_PRTY_STS 0x13009c
950 /* [RC 11] Parity register #0 read clear */
951 #define IGU_REG_IGU_PRTY_STS_CLR 0x1300a0
952 /* [R 4] Debug: int_handle_fsm */
953 #define IGU_REG_INT_HANDLE_FSM 0x130050
954 #define IGU_REG_LEADING_EDGE_LATCH 0x130134
955 /* [RW 14] mapping CAM; relevant for E2 operating mode only. [0] - valid.
956 * [6:1] - vector number; [13:7] - FID (if VF - [13] = 0; [12:7] = VF
957 * number; if PF - [13] = 1; [12:10] = 0; [9:7] = PF number); */
958 #define IGU_REG_MAPPING_MEMORY 0x131000
959 #define IGU_REG_MAPPING_MEMORY_SIZE 136
960 #define IGU_REG_PBA_STATUS_LSB 0x130138
961 #define IGU_REG_PBA_STATUS_MSB 0x13013c
962 #define IGU_REG_PCI_PF_MSI_EN 0x130140
963 #define IGU_REG_PCI_PF_MSIX_EN 0x130144
964 #define IGU_REG_PCI_PF_MSIX_FUNC_MASK 0x130148
965 /* [WB_R 32] Each bit represent the pending bits status for that SB. 0 = no
966 * pending; 1 = pending. Pendings means interrupt was asserted; and write
967 * done was not received. Data valid only in addresses 0-4. all the rest are
968 * zero. */
969 #define IGU_REG_PENDING_BITS_STATUS 0x130300
970 #define IGU_REG_PF_CONFIGURATION 0x130154
971 /* [RW 20] producers only. E2 mode: address 0-135 match to the mapping
972 * memory; 136 - PF0 default prod; 137 PF1 default prod; 138 - PF2 default
973 * prod; 139 PF3 default prod; 140 - PF0 - ATTN prod; 141 - PF1 - ATTN prod;
974 * 142 - PF2 - ATTN prod; 143 - PF3 - ATTN prod; 144-147 reserved. E1.5 mode
975 * - In backward compatible mode; for non default SB; each even line in the
976 * memory holds the U producer and each odd line hold the C producer. The
977 * first 128 producer are for NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The
978 * last 20 producers are for the DSB for each PF. each PF has five segments
979 * (the order inside each segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
980 * 132-135 C prods; 136-139 X prods; 140-143 T prods; 144-147 ATTN prods; */
981 #define IGU_REG_PROD_CONS_MEMORY 0x132000
982 /* [R 3] Debug: pxp_arb_fsm */
983 #define IGU_REG_PXP_ARB_FSM 0x130068
984 /* [RW 6] Write one for each bit will reset the appropriate memory. When the
985 * memory reset finished the appropriate bit will be clear. Bit 0 - mapping
986 * memory; Bit 1 - SB memory; Bit 2 - SB interrupt and mask register; Bit 3
987 * - MSIX memory; Bit 4 - PBA memory; Bit 5 - statistics; */
988 #define IGU_REG_RESET_MEMORIES 0x130158
989 /* [R 4] Debug: sb_ctrl_fsm */
990 #define IGU_REG_SB_CTRL_FSM 0x13004c
991 #define IGU_REG_SB_INT_BEFORE_MASK_LSB 0x13015c
992 #define IGU_REG_SB_INT_BEFORE_MASK_MSB 0x130160
993 #define IGU_REG_SB_MASK_LSB 0x130164
994 #define IGU_REG_SB_MASK_MSB 0x130168
995 /* [RW 16] Number of command that were dropped without causing an interrupt
996 * due to: read access for WO BAR address; or write access for RO BAR
997 * address or any access for reserved address or PCI function error is set
998 * and address is not MSIX; PBA or cleanup */
999 #define IGU_REG_SILENT_DROP 0x13016c
1000 /* [RW 10] Number of MSI/MSIX/ATTN messages sent for the function: 0-63 -
1001 * number of MSIX messages per VF; 64-67 - number of MSI/MSIX messages per
1002 * PF; 68-71 number of ATTN messages per PF */
1003 #define IGU_REG_STATISTIC_NUM_MESSAGE_SENT 0x130800
1004 /* [RW 32] Number of cycles the timer mask masking the IGU interrupt when a
1005 * timer mask command arrives. Value must be bigger than 100. */
1006 #define IGU_REG_TIMER_MASKING_VALUE 0x13003c
1007 #define IGU_REG_TRAILING_EDGE_LATCH 0x130104
1008 #define IGU_REG_VF_CONFIGURATION 0x130170
1009 /* [WB_R 32] Each bit represent write done pending bits status for that SB
1010 * (MSI/MSIX message was sent and write done was not received yet). 0 =
1011 * clear; 1 = set. Data valid only in addresses 0-4. all the rest are zero. */
1012 #define IGU_REG_WRITE_DONE_PENDING 0x130480
1013 #define MCP_A_REG_MCPR_SCRATCH 0x3a0000
1014 #define MCP_REG_MCPR_ACCESS_LOCK 0x8009c
1015 #define MCP_REG_MCPR_CPU_PROGRAM_COUNTER 0x8501c
1016 #define MCP_REG_MCPR_GP_INPUTS 0x800c0
1017 #define MCP_REG_MCPR_GP_OENABLE 0x800c8
1018 #define MCP_REG_MCPR_GP_OUTPUTS 0x800c4
1019 #define MCP_REG_MCPR_IMC_COMMAND 0x85900
1020 #define MCP_REG_MCPR_IMC_DATAREG0 0x85920
1021 #define MCP_REG_MCPR_IMC_SLAVE_CONTROL 0x85904
1022 #define MCP_REG_MCPR_CPU_PROGRAM_COUNTER 0x8501c
1023 #define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424
1024 #define MCP_REG_MCPR_NVM_ADDR 0x8640c
1025 #define MCP_REG_MCPR_NVM_CFG4 0x8642c
1026 #define MCP_REG_MCPR_NVM_COMMAND 0x86400
1027 #define MCP_REG_MCPR_NVM_READ 0x86410
1028 #define MCP_REG_MCPR_NVM_SW_ARB 0x86420
1029 #define MCP_REG_MCPR_NVM_WRITE 0x86408
1030 #define MCP_REG_MCPR_SCRATCH 0xa0000
1031 #define MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK (0x1<<1)
1032 #define MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK (0x1<<0)
1033 /* [R 32] read first 32 bit after inversion of function 0. mapped as
1034 follows: [0] NIG attention for function0; [1] NIG attention for
1035 function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp;
1036 [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9]
1037 GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE
1038 glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0;
1039 [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16]
1040 MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB
1041 Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw
1042 interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity
1043 error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw
1044 interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF
1045 Parity error; [31] PBF Hw interrupt; */
1046 #define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 0xa42c
1047 #define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1 0xa430
1048 /* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0]
1049 NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
1050 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
1051 [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
1052 PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
1053 function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
1054 Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
1055 mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
1056 BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
1057 Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
1058 interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
1059 Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
1060 interrupt; */
1061 #define MISC_REG_AEU_AFTER_INVERT_1_MCP 0xa434
1062 /* [R 32] read second 32 bit after inversion of function 0. mapped as
1063 follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1064 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1065 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1066 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1067 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1068 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1069 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1070 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1071 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1072 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1073 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1074 interrupt; */
1075 #define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 0xa438
1076 #define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1 0xa43c
1077 /* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0]
1078 PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error;
1079 [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt;
1080 [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9]
1081 XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
1082 DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
1083 error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
1084 PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
1085 [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
1086 [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
1087 [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
1088 [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
1089 #define MISC_REG_AEU_AFTER_INVERT_2_MCP 0xa440
1090 /* [R 32] read third 32 bit after inversion of function 0. mapped as
1091 follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity
1092 error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5]
1093 PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1094 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1095 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1096 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1097 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1098 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1099 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1100 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1101 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1102 attn1; */
1103 #define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 0xa444
1104 #define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1 0xa448
1105 /* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0]
1106 CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP
1107 Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient
1108 Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity
1109 error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw
1110 interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14]
1111 MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17]
1112 Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW
1113 timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3
1114 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1
1115 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW
1116 timers attn_4 func1; [30] General attn0; [31] General attn1; */
1117 #define MISC_REG_AEU_AFTER_INVERT_3_MCP 0xa44c
1118 /* [R 32] read fourth 32 bit after inversion of function 0. mapped as
1119 follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1120 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1121 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1122 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1123 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1124 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1125 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1126 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1127 Latched timeout attention; [27] GRC Latched reserved access attention;
1128 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1129 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1130 #define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 0xa450
1131 #define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1 0xa454
1132 /* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0]
1133 General attn2; [1] General attn3; [2] General attn4; [3] General attn5;
1134 [4] General attn6; [5] General attn7; [6] General attn8; [7] General
1135 attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11]
1136 General attn13; [12] General attn14; [13] General attn15; [14] General
1137 attn16; [15] General attn17; [16] General attn18; [17] General attn19;
1138 [18] General attn20; [19] General attn21; [20] Main power interrupt; [21]
1139 RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24]
1140 RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout
1141 attention; [27] GRC Latched reserved access attention; [28] MCP Latched
1142 rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched
1143 ump_tx_parity; [31] MCP Latched scpad_parity; */
1144 #define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458
1145 /* [R 32] Read fifth 32 bit after inversion of function 0. Mapped as
1146 * follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
1147 * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
1148 * CNIG attention (reserved); [7] CNIG parity (reserved); [31-8] Reserved; */
1149 #define MISC_REG_AEU_AFTER_INVERT_5_FUNC_0 0xa700
1150 /* [W 14] write to this register results with the clear of the latched
1151 signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in
1152 d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP
1153 latch; one in d5 clears GRC Latched timeout attention; one in d6 clears
1154 GRC Latched reserved access attention; one in d7 clears Latched
1155 rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears
1156 Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both
1157 ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears
1158 pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read
1159 from this register return zero */
1160 #define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c
1161 /* [RW 32] first 32b for enabling the output for function 0 output0. mapped
1162 as follows: [0] NIG attention for function0; [1] NIG attention for
1163 function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
1164 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
1165 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1166 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1167 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1168 SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
1169 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
1170 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
1171 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
1172 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
1173 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1174 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c
1175 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c
1176 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c
1177 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c
1178 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5 0xa0bc
1179 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6 0xa0cc
1180 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7 0xa0dc
1181 /* [RW 32] first 32b for enabling the output for function 1 output0. mapped
1182 as follows: [0] NIG attention for function0; [1] NIG attention for
1183 function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function
1184 1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
1185 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1186 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1187 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1188 SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X
1189 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
1190 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
1191 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
1192 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
1193 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1194 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c
1195 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c
1196 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c
1197 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c
1198 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5 0xa15c
1199 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6 0xa16c
1200 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7 0xa17c
1201 /* [RW 32] first 32b for enabling the output for close the gate nig. mapped
1202 as follows: [0] NIG attention for function0; [1] NIG attention for
1203 function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
1204 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
1205 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1206 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1207 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1208 SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
1209 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
1210 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
1211 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
1212 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
1213 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1214 #define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec
1215 #define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c
1216 /* [RW 32] first 32b for enabling the output for close the gate pxp. mapped
1217 as follows: [0] NIG attention for function0; [1] NIG attention for
1218 function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
1219 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
1220 GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1221 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1222 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1223 SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
1224 indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
1225 [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
1226 SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
1227 TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
1228 TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1229 #define MISC_REG_AEU_ENABLE1_PXP_0 0xa0fc
1230 #define MISC_REG_AEU_ENABLE1_PXP_1 0xa19c
1231 /* [RW 32] second 32b for enabling the output for function 0 output0. mapped
1232 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1233 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1234 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1235 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1236 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1237 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1238 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1239 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1240 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1241 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1242 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1243 interrupt; */
1244 #define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0 0xa070
1245 #define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1 0xa080
1246 /* [RW 32] second 32b for enabling the output for function 1 output0. mapped
1247 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1248 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1249 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1250 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1251 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1252 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1253 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1254 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1255 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1256 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1257 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1258 interrupt; */
1259 #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110
1260 #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120
1261 /* [RW 32] second 32b for enabling the output for close the gate nig. mapped
1262 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1263 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1264 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1265 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1266 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1267 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1268 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1269 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1270 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1271 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1272 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1273 interrupt; */
1274 #define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0
1275 #define MISC_REG_AEU_ENABLE2_NIG_1 0xa190
1276 /* [RW 32] second 32b for enabling the output for close the gate pxp. mapped
1277 as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1278 Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1279 interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1280 error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1281 interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1282 NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1283 [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1284 interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1285 Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1286 Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1287 Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1288 interrupt; */
1289 #define MISC_REG_AEU_ENABLE2_PXP_0 0xa100
1290 #define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0
1291 /* [RW 32] third 32b for enabling the output for function 0 output0. mapped
1292 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1293 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1294 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1295 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1296 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1297 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1298 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1299 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1300 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1301 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1302 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1303 attn1; */
1304 #define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0 0xa074
1305 #define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1 0xa084
1306 /* [RW 32] third 32b for enabling the output for function 1 output0. mapped
1307 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1308 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1309 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1310 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1311 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1312 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1313 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1314 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1315 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1316 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1317 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1318 attn1; */
1319 #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114
1320 #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124
1321 /* [RW 32] third 32b for enabling the output for close the gate nig. mapped
1322 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1323 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1324 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1325 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1326 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1327 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1328 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1329 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1330 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1331 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1332 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1333 attn1; */
1334 #define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4
1335 #define MISC_REG_AEU_ENABLE3_NIG_1 0xa194
1336 /* [RW 32] third 32b for enabling the output for close the gate pxp. mapped
1337 as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1338 Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1339 [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1340 interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1341 error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1342 Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1343 pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1344 MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1345 SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1346 timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1347 func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1348 attn1; */
1349 #define MISC_REG_AEU_ENABLE3_PXP_0 0xa104
1350 #define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4
1351 /* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped
1352 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1353 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1354 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1355 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1356 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1357 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1358 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1359 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1360 Latched timeout attention; [27] GRC Latched reserved access attention;
1361 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1362 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1363 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078
1364 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098
1365 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4 0xa0b8
1366 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5 0xa0c8
1367 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6 0xa0d8
1368 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7 0xa0e8
1369 /* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped
1370 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1371 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1372 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1373 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1374 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1375 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1376 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1377 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1378 Latched timeout attention; [27] GRC Latched reserved access attention;
1379 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1380 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1381 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118
1382 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138
1383 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4 0xa158
1384 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5 0xa168
1385 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6 0xa178
1386 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7 0xa188
1387 /* [RW 32] fourth 32b for enabling the output for close the gate nig.mapped
1388 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1389 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1390 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1391 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1392 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1393 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1394 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1395 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1396 Latched timeout attention; [27] GRC Latched reserved access attention;
1397 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1398 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1399 #define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8
1400 #define MISC_REG_AEU_ENABLE4_NIG_1 0xa198
1401 /* [RW 32] fourth 32b for enabling the output for close the gate pxp.mapped
1402 as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1403 General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1404 [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1405 attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1406 [14] General attn16; [15] General attn17; [16] General attn18; [17]
1407 General attn19; [18] General attn20; [19] General attn21; [20] Main power
1408 interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1409 Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1410 Latched timeout attention; [27] GRC Latched reserved access attention;
1411 [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1412 Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1413 #define MISC_REG_AEU_ENABLE4_PXP_0 0xa108
1414 #define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8
1415 /* [RW 32] fifth 32b for enabling the output for function 0 output0. Mapped
1416 * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
1417 * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
1418 * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
1419 * parity; [31-10] Reserved; */
1420 #define MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0 0xa688
1421 /* [RW 32] Fifth 32b for enabling the output for function 1 output0. Mapped
1422 * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
1423 * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
1424 * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
1425 * parity; [31-10] Reserved; */
1426 #define MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 0xa6b0
1427 /* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
1428 128 bit vector */
1429 #define MISC_REG_AEU_GENERAL_ATTN_0 0xa000
1430 #define MISC_REG_AEU_GENERAL_ATTN_1 0xa004
1431 #define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
1432 #define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
1433 #define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
1434 #define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
1435 #define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c
1436 #define MISC_REG_AEU_GENERAL_ATTN_4 0xa010
1437 #define MISC_REG_AEU_GENERAL_ATTN_5 0xa014
1438 #define MISC_REG_AEU_GENERAL_ATTN_6 0xa018
1439 #define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c
1440 #define MISC_REG_AEU_GENERAL_ATTN_8 0xa020
1441 #define MISC_REG_AEU_GENERAL_ATTN_9 0xa024
1442 #define MISC_REG_AEU_GENERAL_MASK 0xa61c
1443 /* [RW 32] first 32b for inverting the input for function 0; for each bit:
1444 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
1445 function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
1446 [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; [7] GPIO2 function 1;
1447 [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1448 function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1449 Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1450 SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication
1451 for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; [20] PRS
1452 Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] SRC Hw
1453 interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] TCM
1454 Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] TSEMI
1455 Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1456 #define MISC_REG_AEU_INVERTER_1_FUNC_0 0xa22c
1457 #define MISC_REG_AEU_INVERTER_1_FUNC_1 0xa23c
1458 /* [RW 32] second 32b for inverting the input for function 0; for each bit:
1459 0= do not invert; 1= invert. mapped as follows: [0] PBClient Parity
1460 error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw
1461 interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM
1462 Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw
1463 interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
1464 DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
1465 error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
1466 PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
1467 [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
1468 [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
1469 [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
1470 [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
1471 #define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230
1472 #define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240
1473 /* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0;
1474 [9:8] = raserved. Zero = mask; one = unmask */
1475 #define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060
1476 #define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064
1477 /* [RW 1] If set a system kill occurred */
1478 #define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610
1479 /* [RW 32] Represent the status of the input vector to the AEU when a system
1480 kill occurred. The register is reset in por reset. Mapped as follows: [0]
1481 NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
1482 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
1483 [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
1484 PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
1485 function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
1486 Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
1487 mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
1488 BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
1489 Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
1490 interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
1491 Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
1492 interrupt; */
1493 #define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600
1494 #define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604
1495 #define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608
1496 #define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c
1497 /* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1
1498 Port. */
1499 #define MISC_REG_BOND_ID 0xa400
1500 /* [R 16] These bits indicate the part number for the chip. */
1501 #define MISC_REG_CHIP_NUM 0xa408
1502 /* [R 4] These bits indicate the base revision of the chip. This value
1503 starts at 0x0 for the A0 tape-out and increments by one for each
1504 all-layer tape-out. */
1505 #define MISC_REG_CHIP_REV 0xa40c
1506 /* [R 14] otp_misc_do[100:0] spare bits collection: 13:11-
1507 * otp_misc_do[100:98]; 10:7 - otp_misc_do[87:84]; 6:3 - otp_misc_do[75:72];
1508 * 2:1 - otp_misc_do[51:50]; 0 - otp_misc_do[1]. */
1509 #define MISC_REG_CHIP_TYPE 0xac60
1510 #define MISC_REG_CHIP_TYPE_57811_MASK (1<<1)
1511 #define MISC_REG_CPMU_LP_DR_ENABLE 0xa858
1512 /* [RW 1] FW EEE LPI Enable. When 1 indicates that EEE LPI mode is enabled
1513 * by FW. When 0 indicates that the EEE LPI mode is disabled by FW. Clk
1514 * 25MHz. Reset on hard reset. */
1515 #define MISC_REG_CPMU_LP_FW_ENABLE_P0 0xa84c
1516 /* [RW 32] EEE LPI Idle Threshold. The threshold value for the idle EEE LPI
1517 * counter. Timer tick is 1 us. Clock 25MHz. Reset on hard reset. */
1518 #define MISC_REG_CPMU_LP_IDLE_THR_P0 0xa8a0
1519 /* [RW 18] LPI entry events mask. [0] - Vmain SM Mask. When 1 indicates that
1520 * the Vmain SM end state is disabled. When 0 indicates that the Vmain SM
1521 * end state is enabled. [1] - FW Queues Empty Mask. When 1 indicates that
1522 * the FW command that all Queues are empty is disabled. When 0 indicates
1523 * that the FW command that all Queues are empty is enabled. [2] - FW Early
1524 * Exit Mask / Reserved (Entry mask). When 1 indicates that the FW Early
1525 * Exit command is disabled. When 0 indicates that the FW Early Exit command
1526 * is enabled. This bit applicable only in the EXIT Events Mask registers.
1527 * [3] - PBF Request Mask. When 1 indicates that the PBF Request indication
1528 * is disabled. When 0 indicates that the PBF Request indication is enabled.
1529 * [4] - Tx Request Mask. When =1 indicates that the Tx other Than PBF
1530 * Request indication is disabled. When 0 indicates that the Tx Other Than
1531 * PBF Request indication is enabled. [5] - Rx EEE LPI Status Mask. When 1
1532 * indicates that the RX EEE LPI Status indication is disabled. When 0
1533 * indicates that the RX EEE LPI Status indication is enabled. In the EXIT
1534 * Events Masks registers; this bit masks the falling edge detect of the LPI
1535 * Status (Rx LPI is on - off). [6] - Tx Pause Mask. When 1 indicates that
1536 * the Tx Pause indication is disabled. When 0 indicates that the Tx Pause
1537 * indication is enabled. [7] - BRB1 Empty Mask. When 1 indicates that the
1538 * BRB1 EMPTY indication is disabled. When 0 indicates that the BRB1 EMPTY
1539 * indication is enabled. [8] - QM Idle Mask. When 1 indicates that the QM
1540 * IDLE indication is disabled. When 0 indicates that the QM IDLE indication
1541 * is enabled. (One bit for both VOQ0 and VOQ1). [9] - QM LB Idle Mask. When
1542 * 1 indicates that the QM IDLE indication for LOOPBACK is disabled. When 0
1543 * indicates that the QM IDLE indication for LOOPBACK is enabled. [10] - L1
1544 * Status Mask. When 1 indicates that the L1 Status indication from the PCIE
1545 * CORE is disabled. When 0 indicates that the RX EEE LPI Status indication
1546 * from the PCIE CORE is enabled. In the EXIT Events Masks registers; this
1547 * bit masks the falling edge detect of the L1 status (L1 is on - off). [11]
1548 * - P0 E0 EEE EEE LPI REQ Mask. When =1 indicates that the P0 E0 EEE EEE
1549 * LPI REQ indication is disabled. When =0 indicates that the P0 E0 EEE LPI
1550 * REQ indication is enabled. [12] - P1 E0 EEE LPI REQ Mask. When =1
1551 * indicates that the P0 EEE LPI REQ indication is disabled. When =0
1552 * indicates that the P0 EEE LPI REQ indication is enabled. [13] - P0 E1 EEE
1553 * LPI REQ Mask. When =1 indicates that the P0 EEE LPI REQ indication is
1554 * disabled. When =0 indicates that the P0 EEE LPI REQ indication is
1555 * enabled. [14] - P1 E1 EEE LPI REQ Mask. When =1 indicates that the P0 EEE
1556 * LPI REQ indication is disabled. When =0 indicates that the P0 EEE LPI REQ
1557 * indication is enabled. [15] - L1 REQ Mask. When =1 indicates that the L1
1558 * REQ indication is disabled. When =0 indicates that the L1 indication is
1559 * enabled. [16] - Rx EEE LPI Status Edge Detect Mask. When =1 indicates
1560 * that the RX EEE LPI Status Falling Edge Detect indication is disabled (Rx
1561 * EEE LPI is on - off). When =0 indicates that the RX EEE LPI Status
1562 * Falling Edge Detec indication is enabled (Rx EEE LPI is on - off). This
1563 * bit is applicable only in the EXIT Events Masks registers. [17] - L1
1564 * Status Edge Detect Mask. When =1 indicates that the L1 Status Falling
1565 * Edge Detect indication from the PCIE CORE is disabled (L1 is on - off).
1566 * When =0 indicates that the L1 Status Falling Edge Detect indication from
1567 * the PCIE CORE is enabled (L1 is on - off). This bit is applicable only in
1568 * the EXIT Events Masks registers. Clock 25MHz. Reset on hard reset. */
1569 #define MISC_REG_CPMU_LP_MASK_ENT_P0 0xa880
1570 /* [RW 18] EEE LPI exit events mask. [0] - Vmain SM Mask. When 1 indicates
1571 * that the Vmain SM end state is disabled. When 0 indicates that the Vmain
1572 * SM end state is enabled. [1] - FW Queues Empty Mask. When 1 indicates
1573 * that the FW command that all Queues are empty is disabled. When 0
1574 * indicates that the FW command that all Queues are empty is enabled. [2] -
1575 * FW Early Exit Mask / Reserved (Entry mask). When 1 indicates that the FW
1576 * Early Exit command is disabled. When 0 indicates that the FW Early Exit
1577 * command is enabled. This bit applicable only in the EXIT Events Mask
1578 * registers. [3] - PBF Request Mask. When 1 indicates that the PBF Request
1579 * indication is disabled. When 0 indicates that the PBF Request indication
1580 * is enabled. [4] - Tx Request Mask. When =1 indicates that the Tx other
1581 * Than PBF Request indication is disabled. When 0 indicates that the Tx
1582 * Other Than PBF Request indication is enabled. [5] - Rx EEE LPI Status
1583 * Mask. When 1 indicates that the RX EEE LPI Status indication is disabled.
1584 * When 0 indicates that the RX LPI Status indication is enabled. In the
1585 * EXIT Events Masks registers; this bit masks the falling edge detect of
1586 * the EEE LPI Status (Rx EEE LPI is on - off). [6] - Tx Pause Mask. When 1
1587 * indicates that the Tx Pause indication is disabled. When 0 indicates that
1588 * the Tx Pause indication is enabled. [7] - BRB1 Empty Mask. When 1
1589 * indicates that the BRB1 EMPTY indication is disabled. When 0 indicates
1590 * that the BRB1 EMPTY indication is enabled. [8] - QM Idle Mask. When 1
1591 * indicates that the QM IDLE indication is disabled. When 0 indicates that
1592 * the QM IDLE indication is enabled. (One bit for both VOQ0 and VOQ1). [9]
1593 * - QM LB Idle Mask. When 1 indicates that the QM IDLE indication for
1594 * LOOPBACK is disabled. When 0 indicates that the QM IDLE indication for
1595 * LOOPBACK is enabled. [10] - L1 Status Mask. When 1 indicates that the L1
1596 * Status indication from the PCIE CORE is disabled. When 0 indicates that
1597 * the RX EEE LPI Status indication from the PCIE CORE is enabled. In the
1598 * EXIT Events Masks registers; this bit masks the falling edge detect of
1599 * the L1 status (L1 is on - off). [11] - P0 E0 EEE EEE LPI REQ Mask. When
1600 * =1 indicates that the P0 E0 EEE EEE LPI REQ indication is disabled. When
1601 * =0 indicates that the P0 E0 EEE LPI REQ indication is enabled. [12] - P1
1602 * E0 EEE LPI REQ Mask. When =1 indicates that the P0 EEE LPI REQ indication
1603 * is disabled. When =0 indicates that the P0 EEE LPI REQ indication is
1604 * enabled. [13] - P0 E1 EEE LPI REQ Mask. When =1 indicates that the P0 EEE
1605 * LPI REQ indication is disabled. When =0 indicates that the P0 EEE LPI REQ
1606 * indication is enabled. [14] - P1 E1 EEE LPI REQ Mask. When =1 indicates
1607 * that the P0 EEE LPI REQ indication is disabled. When =0 indicates that
1608 * the P0 EEE LPI REQ indication is enabled. [15] - L1 REQ Mask. When =1
1609 * indicates that the L1 REQ indication is disabled. When =0 indicates that
1610 * the L1 indication is enabled. [16] - Rx EEE LPI Status Edge Detect Mask.
1611 * When =1 indicates that the RX EEE LPI Status Falling Edge Detect
1612 * indication is disabled (Rx EEE LPI is on - off). When =0 indicates that
1613 * the RX EEE LPI Status Falling Edge Detec indication is enabled (Rx EEE
1614 * LPI is on - off). This bit is applicable only in the EXIT Events Masks
1615 * registers. [17] - L1 Status Edge Detect Mask. When =1 indicates that the
1616 * L1 Status Falling Edge Detect indication from the PCIE CORE is disabled
1617 * (L1 is on - off). When =0 indicates that the L1 Status Falling Edge
1618 * Detect indication from the PCIE CORE is enabled (L1 is on - off). This
1619 * bit is applicable only in the EXIT Events Masks registers.Clock 25MHz.
1620 * Reset on hard reset. */
1621 #define MISC_REG_CPMU_LP_MASK_EXT_P0 0xa888
1622 /* [RW 16] EEE LPI Entry Events Counter. A statistic counter with the number
1623 * of counts that the SM entered the EEE LPI state. Clock 25MHz. Read only
1624 * register. Reset on hard reset. */
1625 #define MISC_REG_CPMU_LP_SM_ENT_CNT_P0 0xa8b8
1626 /* [RW 16] EEE LPI Entry Events Counter. A statistic counter with the number
1627 * of counts that the SM entered the EEE LPI state. Clock 25MHz. Read only
1628 * register. Reset on hard reset. */
1629 #define MISC_REG_CPMU_LP_SM_ENT_CNT_P1 0xa8bc
1630 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1631 32 clients. Each client can be controlled by one driver only. One in each
1632 bit represent that this driver control the appropriate client (Ex: bit 5
1633 is set means this driver control client number 5). addr1 = set; addr0 =
1634 clear; read from both addresses will give the same result = status. write
1635 to address 1 will set a request to control all the clients that their
1636 appropriate bit (in the write command) is set. if the client is free (the
1637 appropriate bit in all the other drivers is clear) one will be written to
1638 that driver register; if the client isn't free the bit will remain zero.
1639 if the appropriate bit is set (the driver request to gain control on a
1640 client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1641 interrupt will be asserted). write to address 0 will set a request to
1642 free all the clients that their appropriate bit (in the write command) is
1643 set. if the appropriate bit is clear (the driver request to free a client
1644 it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1645 be asserted). */
1646 #define MISC_REG_DRIVER_CONTROL_1 0xa510
1647 #define MISC_REG_DRIVER_CONTROL_7 0xa3c8
1648 /* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
1649 only. */
1650 #define MISC_REG_E1HMF_MODE 0xa5f8
1651 /* [R 1] Status of four port mode path swap input pin. */
1652 #define MISC_REG_FOUR_PORT_PATH_SWAP 0xa75c
1653 /* [RW 2] 4 port path swap overwrite.[0] - Overwrite control; if it is 0 -
1654 the path_swap output is equal to 4 port mode path swap input pin; if it
1655 is 1 - the path_swap output is equal to bit[1] of this register; [1] -
1656 Overwrite value. If bit[0] of this register is 1 this is the value that
1657 receives the path_swap output. Reset on Hard reset. */
1658 #define MISC_REG_FOUR_PORT_PATH_SWAP_OVWR 0xa738
1659 /* [R 1] Status of 4 port mode port swap input pin. */
1660 #define MISC_REG_FOUR_PORT_PORT_SWAP 0xa754
1661 /* [RW 2] 4 port port swap overwrite.[0] - Overwrite control; if it is 0 -
1662 the port_swap output is equal to 4 port mode port swap input pin; if it
1663 is 1 - the port_swap output is equal to bit[1] of this register; [1] -
1664 Overwrite value. If bit[0] of this register is 1 this is the value that
1665 receives the port_swap output. Reset on Hard reset. */
1666 #define MISC_REG_FOUR_PORT_PORT_SWAP_OVWR 0xa734
1667 /* [RW 32] Debug only: spare RW register reset by core reset */
1668 #define MISC_REG_GENERIC_CR_0 0xa460
1669 #define MISC_REG_GENERIC_CR_1 0xa464
1670 /* [RW 32] Debug only: spare RW register reset by por reset */
1671 #define MISC_REG_GENERIC_POR_1 0xa474
1672 /* [RW 32] Bit[0]: EPIO MODE SEL: Setting this bit to 1 will allow SW/FW to
1673 use all of the 32 Extended GPIO pins. Without setting this bit; an EPIO
1674 can not be configured as an output. Each output has its output enable in
1675 the MCP register space; but this bit needs to be set to make use of that.
1676 Bit[3:1] spare. Bit[4]: WCVTMON_PWRDN: Powerdown for Warpcore VTMON. When
1677 set to 1 - Powerdown. Bit[5]: WCVTMON_RESETB: Reset for Warpcore VTMON.
1678 When set to 0 - vTMON is in reset. Bit[6]: setting this bit will change
1679 the i/o to an output and will drive the TimeSync output. Bit[31:7]:
1680 spare. Global register. Reset by hard reset. */
1681 #define MISC_REG_GEN_PURP_HWG 0xa9a0
1682 /* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
1683 these bits is written as a '1'; the corresponding SPIO bit will turn off
1684 it's drivers and become an input. This is the reset state of all GPIO
1685 pins. The read value of these bits will be a '1' if that last command
1686 (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
1687 [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
1688 as a '1'; the corresponding GPIO bit will drive low. The read value of
1689 these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
1690 this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
1691 SET When any of these bits is written as a '1'; the corresponding GPIO
1692 bit will drive high (if it has that capability). The read value of these
1693 bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
1694 bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
1695 RO; These bits indicate the read value of each of the eight GPIO pins.
1696 This is the result value of the pin; not the drive value. Writing these
1697 bits will have not effect. */
1698 #define MISC_REG_GPIO 0xa490
1699 /* [RW 8] These bits enable the GPIO_INTs to signals event to the
1700 IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2]
1701 p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2;
1702 [7] p1_gpio_3; */
1703 #define MISC_REG_GPIO_EVENT_EN 0xa2bc
1704 /* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing a
1705 '1' to these bit clears the corresponding bit in the #OLD_VALUE register.
1706 This will acknowledge an interrupt on the falling edge of corresponding
1707 GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0;
1708 Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE
1709 register. This will acknowledge an interrupt on the rising edge of
1710 corresponding SPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1;
1711 OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input
1712 value. When the ~INT_STATE bit is set; this bit indicates the OLD value
1713 of the pin such that if ~INT_STATE is set and this bit is '0'; then the
1714 interrupt is due to a low to high edge. If ~INT_STATE is set and this bit
1715 is '1'; then the interrupt is due to a high to low edge (reset value 0).
1716 [7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the
1717 current GPIO interrupt state for each GPIO pin. This bit is cleared when
1718 the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is
1719 set when the GPIO input does not match the current value in #OLD_VALUE
1720 (reset value 0). */
1721 #define MISC_REG_GPIO_INT 0xa494
1722 /* [R 28] this field hold the last information that caused reserved
1723 attention. bits [19:0] - address; [22:20] function; [23] reserved;
1724 [27:24] the master that caused the attention - according to the following
1725 encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
1726 dbu; 8 = dmae */
1727 #define MISC_REG_GRC_RSV_ATTN 0xa3c0
1728 /* [R 28] this field hold the last information that caused timeout
1729 attention. bits [19:0] - address; [22:20] function; [23] reserved;
1730 [27:24] the master that caused the attention - according to the following
1731 encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
1732 dbu; 8 = dmae */
1733 #define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4
1734 /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any
1735 access that does not finish within
1736 ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is
1737 cleared; this timeout is disabled. If this timeout occurs; the GRC shall
1738 assert it attention output. */
1739 #define MISC_REG_GRC_TIMEOUT_EN 0xa280
1740 /* [RW 28] 28 LSB of LCPLL first register; reset val = 521. inside order of
1741 the bits is: [2:0] OAC reset value 001) CML output buffer bias control;
1742 111 for +40%; 011 for +20%; 001 for 0%; 000 for -20%. [5:3] Icp_ctrl
1743 (reset value 001) Charge pump current control; 111 for 720u; 011 for
1744 600u; 001 for 480u and 000 for 360u. [7:6] Bias_ctrl (reset value 00)
1745 Global bias control; When bit 7 is high bias current will be 10 0gh; When
1746 bit 6 is high bias will be 100w; Valid values are 00; 10; 01. [10:8]
1747 Pll_observe (reset value 010) Bits to control observability. bit 10 is
1748 for test bias; bit 9 is for test CK; bit 8 is test Vc. [12:11] Vth_ctrl
1749 (reset value 00) Comparator threshold control. 00 for 0.6V; 01 for 0.54V
1750 and 10 for 0.66V. [13] pllSeqStart (reset value 0) Enables VCO tuning
1751 sequencer: 1= sequencer disabled; 0= sequencer enabled (inverted
1752 internally). [14] reserved (reset value 0) Reset for VCO sequencer is
1753 connected to RESET input directly. [15] capRetry_en (reset value 0)
1754 enable retry on cap search failure (inverted). [16] freqMonitor_e (reset
1755 value 0) bit to continuously monitor vco freq (inverted). [17]
1756 freqDetRestart_en (reset value 0) bit to enable restart when not freq
1757 locked (inverted). [18] freqDetRetry_en (reset value 0) bit to enable
1758 retry on freq det failure(inverted). [19] pllForceFdone_en (reset value
1759 0) bit to enable pllForceFdone & pllForceFpass into pllSeq. [20]
1760 pllForceFdone (reset value 0) bit to force freqDone. [21] pllForceFpass
1761 (reset value 0) bit to force freqPass. [22] pllForceDone_en (reset value
1762 0) bit to enable pllForceCapDone. [23] pllForceCapDone (reset value 0)
1763 bit to force capDone. [24] pllForceCapPass_en (reset value 0) bit to
1764 enable pllForceCapPass. [25] pllForceCapPass (reset value 0) bit to force
1765 capPass. [26] capRestart (reset value 0) bit to force cap sequencer to
1766 restart. [27] capSelectM_en (reset value 0) bit to enable cap select
1767 register bits. */
1768 #define MISC_REG_LCPLL_CTRL_1 0xa2a4
1769 #define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8
1770 /* [RW 1] LCPLL power down. Global register. Active High. Reset on POR
1771 * reset. */
1772 #define MISC_REG_LCPLL_E40_PWRDWN 0xaa74
1773 /* [RW 1] LCPLL VCO reset. Global register. Active Low Reset on POR reset. */
1774 #define MISC_REG_LCPLL_E40_RESETB_ANA 0xaa78
1775 /* [RW 1] LCPLL post-divider reset. Global register. Active Low Reset on POR
1776 * reset. */
1777 #define MISC_REG_LCPLL_E40_RESETB_DIG 0xaa7c
1778 /* [RW 4] Interrupt mask register #0 read/write */
1779 #define MISC_REG_MISC_INT_MASK 0xa388
1780 /* [RW 1] Parity mask register #0 read/write */
1781 #define MISC_REG_MISC_PRTY_MASK 0xa398
1782 /* [R 1] Parity register #0 read */
1783 #define MISC_REG_MISC_PRTY_STS 0xa38c
1784 /* [RC 1] Parity register #0 read clear */
1785 #define MISC_REG_MISC_PRTY_STS_CLR 0xa390
1786 #define MISC_REG_NIG_WOL_P0 0xa270
1787 #define MISC_REG_NIG_WOL_P1 0xa274
1788 /* [R 1] If set indicate that the pcie_rst_b was asserted without perst
1789 assertion */
1790 #define MISC_REG_PCIE_HOT_RESET 0xa618
1791 /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911.
1792 inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
1793 divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
1794 divider[3] (reset value 0); [4] P2 divider[0] (reset value 1); [5] P2
1795 divider[1] (reset value 0); [6] P2 divider[2] (reset value 0); [7] P2
1796 divider[3] (reset value 0); [8] ph_det_dis (reset value 1); [9]
1797 freq_det_dis (reset value 0); [10] Icpx[0] (reset value 0); [11] Icpx[1]
1798 (reset value 1); [12] Icpx[2] (reset value 0); [13] Icpx[3] (reset value
1799 1); [14] Icpx[4] (reset value 0); [15] Icpx[5] (reset value 0); [16]
1800 Rx[0] (reset value 1); [17] Rx[1] (reset value 0); [18] vc_en (reset
1801 value 1); [19] vco_rng[0] (reset value 1); [20] vco_rng[1] (reset value
1802 1); [21] Kvco_xf[0] (reset value 0); [22] Kvco_xf[1] (reset value 0);
1803 [23] Kvco_xf[2] (reset value 0); [24] Kvco_xs[0] (reset value 1); [25]
1804 Kvco_xs[1] (reset value 1); [26] Kvco_xs[2] (reset value 1); [27]
1805 testd_en (reset value 0); [28] testd_sel[0] (reset value 0); [29]
1806 testd_sel[1] (reset value 0); [30] testd_sel[2] (reset value 0); [31]
1807 testa_en (reset value 0); */
1808 #define MISC_REG_PLL_STORM_CTRL_1 0xa294
1809 #define MISC_REG_PLL_STORM_CTRL_2 0xa298
1810 #define MISC_REG_PLL_STORM_CTRL_3 0xa29c
1811 #define MISC_REG_PLL_STORM_CTRL_4 0xa2a0
1812 /* [R 1] Status of 4 port mode enable input pin. */
1813 #define MISC_REG_PORT4MODE_EN 0xa750
1814 /* [RW 2] 4 port mode enable overwrite.[0] - Overwrite control; if it is 0 -
1815 * the port4mode_en output is equal to 4 port mode input pin; if it is 1 -
1816 * the port4mode_en output is equal to bit[1] of this register; [1] -
1817 * Overwrite value. If bit[0] of this register is 1 this is the value that
1818 * receives the port4mode_en output . */
1819 #define MISC_REG_PORT4MODE_EN_OVWR 0xa720
1820 /* [RW 32] reset reg#2; rite/read one = the specific block is out of reset;
1821 write/read zero = the specific block is in reset; addr 0-wr- the write
1822 value will be written to the register; addr 1-set - one will be written
1823 to all the bits that have the value of one in the data written (bits that
1824 have the value of zero will not be change) ; addr 2-clear - zero will be
1825 written to all the bits that have the value of one in the data written
1826 (bits that have the value of zero will not be change); addr 3-ignore;
1827 read ignore from all addr except addr 00; inside order of the bits is:
1828 [0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc;
1829 [5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7]
1830 rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn;
1831 [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13]
1832 Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16]
1833 rst_pxp_rq_rd_wr; 31:17] reserved */
1834 #define MISC_REG_RESET_REG_1 0xa580
1835 #define MISC_REG_RESET_REG_2 0xa590
1836 /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
1837 shared with the driver resides */
1838 #define MISC_REG_SHARED_MEM_ADDR 0xa2b4
1839 /* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1';
1840 the corresponding SPIO bit will turn off it's drivers and become an
1841 input. This is the reset state of all SPIO pins. The read value of these
1842 bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
1843 bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
1844 is written as a '1'; the corresponding SPIO bit will drive low. The read
1845 value of these bits will be a '1' if that last command (#SET; #CLR; or
1846 #FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
1847 these bits is written as a '1'; the corresponding SPIO bit will drive
1848 high (if it has that capability). The read value of these bits will be a
1849 '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
1850 (reset value 0). [7-0] VALUE RO; These bits indicate the read value of
1851 each of the eight SPIO pins. This is the result value of the pin; not the
1852 drive value. Writing these bits will have not effect. Each 8 bits field
1853 is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
1854 from VAUX. (This is an output pin only; the FLOAT field is not applicable
1855 for this pin); [1] VAUX Disable; when pulsed low; disables supply form
1856 VAUX. (This is an output pin only; FLOAT field is not applicable for this
1857 pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
1858 select VAUX supply. (This is an output pin only; it is not controlled by
1859 the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
1860 field is not applicable for this pin; only the VALUE fields is relevant -
1861 it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6]
1862 Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
1863 device ID select; read by UMP firmware. */
1864 #define MISC_REG_SPIO 0xa4fc
1865 /* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC.
1866 according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
1867 [7:0] reserved */
1868 #define MISC_REG_SPIO_EVENT_EN 0xa2b8
1869 /* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the
1870 corresponding bit in the #OLD_VALUE register. This will acknowledge an
1871 interrupt on the falling edge of corresponding SPIO input (reset value
1872 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
1873 in the #OLD_VALUE register. This will acknowledge an interrupt on the
1874 rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
1875 RO; These bits indicate the old value of the SPIO input value. When the
1876 ~INT_STATE bit is set; this bit indicates the OLD value of the pin such
1877 that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
1878 to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
1879 interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
1880 RO; These bits indicate the current SPIO interrupt state for each SPIO
1881 pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
1882 command bit is written. This bit is set when the SPIO input does not
1883 match the current value in #OLD_VALUE (reset value 0). */
1884 #define MISC_REG_SPIO_INT 0xa500
1885 /* [RW 32] reload value for counter 4 if reload; the value will be reload if
1886 the counter reached zero and the reload bit
1887 (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
1888 #define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc
1889 /* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
1890 in this register. address 0 - timer 1; address 1 - timer 2, ... address 7 -
1891 timer 8 */
1892 #define MISC_REG_SW_TIMER_VAL 0xa5c0
1893 /* [R 1] Status of two port mode path swap input pin. */
1894 #define MISC_REG_TWO_PORT_PATH_SWAP 0xa758
1895 /* [RW 2] 2 port swap overwrite.[0] - Overwrite control; if it is 0 - the
1896 path_swap output is equal to 2 port mode path swap input pin; if it is 1
1897 - the path_swap output is equal to bit[1] of this register; [1] -
1898 Overwrite value. If bit[0] of this register is 1 this is the value that
1899 receives the path_swap output. Reset on Hard reset. */
1900 #define MISC_REG_TWO_PORT_PATH_SWAP_OVWR 0xa72c
1901 /* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
1902 loaded; 0-prepare; -unprepare */
1903 #define MISC_REG_UNPREPARED 0xa424
1904 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0)
1905 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1)
1906 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4)
1907 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2)
1908 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3)
1909 /* [RW 5] MDIO PHY Address. The WC uses this address to determine whether or
1910 * not it is the recipient of the message on the MDIO interface. The value
1911 * is compared to the value on ctrl_md_devad. Drives output
1912 * misc_xgxs0_phy_addr. Global register. */
1913 #define MISC_REG_WC0_CTRL_PHY_ADDR 0xa9cc
1914 #define MISC_REG_WC0_RESET 0xac30
1915 /* [RW 2] XMAC Core port mode. Indicates the number of ports on the system
1916 side. This should be less than or equal to phy_port_mode; if some of the
1917 ports are not used. This enables reduction of frequency on the core side.
1918 This is a strap input for the XMAC_MP core. 00 - Single Port Mode; 01 -
1919 Dual Port Mode; 10 - Tri Port Mode; 11 - Quad Port Mode. This is a strap
1920 input for the XMAC_MP core; and should be changed only while reset is
1921 held low. Reset on Hard reset. */
1922 #define MISC_REG_XMAC_CORE_PORT_MODE 0xa964
1923 /* [RW 2] XMAC PHY port mode. Indicates the number of ports on the Warp
1924 Core. This is a strap input for the XMAC_MP core. 00 - Single Port Mode;
1925 01 - Dual Port Mode; 1x - Quad Port Mode; This is a strap input for the
1926 XMAC_MP core; and should be changed only while reset is held low. Reset
1927 on Hard reset. */
1928 #define MISC_REG_XMAC_PHY_PORT_MODE 0xa960
1929 /* [RW 32] 1 [47] Packet Size = 64 Write to this register write bits 31:0.
1930 * Reads from this register will clear bits 31:0. */
1931 #define MSTAT_REG_RX_STAT_GR64_LO 0x200
1932 /* [RW 32] 1 [00] Tx Good Packet Count Write to this register write bits
1933 * 31:0. Reads from this register will clear bits 31:0. */
1934 #define MSTAT_REG_TX_STAT_GTXPOK_LO 0
1935 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0)
1936 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1)
1937 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4)
1938 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2)
1939 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3)
1940 #define NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN (0x1<<0)
1941 #define NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN (0x1<<0)
1942 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0)
1943 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9)
1944 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15)
1945 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS (0xf<<18)
1946 /* [RW 1] Input enable for RX_BMAC0 IF */
1947 #define NIG_REG_BMAC0_IN_EN 0x100ac
1948 /* [RW 1] output enable for TX_BMAC0 IF */
1949 #define NIG_REG_BMAC0_OUT_EN 0x100e0
1950 /* [RW 1] output enable for TX BMAC pause port 0 IF */
1951 #define NIG_REG_BMAC0_PAUSE_OUT_EN 0x10110
1952 /* [RW 1] output enable for RX_BMAC0_REGS IF */
1953 #define NIG_REG_BMAC0_REGS_OUT_EN 0x100e8
1954 /* [RW 1] output enable for RX BRB1 port0 IF */
1955 #define NIG_REG_BRB0_OUT_EN 0x100f8
1956 /* [RW 1] Input enable for TX BRB1 pause port 0 IF */
1957 #define NIG_REG_BRB0_PAUSE_IN_EN 0x100c4
1958 /* [RW 1] output enable for RX BRB1 port1 IF */
1959 #define NIG_REG_BRB1_OUT_EN 0x100fc
1960 /* [RW 1] Input enable for TX BRB1 pause port 1 IF */
1961 #define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8
1962 /* [RW 1] output enable for RX BRB1 LP IF */
1963 #define NIG_REG_BRB_LB_OUT_EN 0x10100
1964 /* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64]
1965 error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush;
1966 72:73]-vnic_num; 81:74]-sideband_info */
1967 #define NIG_REG_DEBUG_PACKET_LB 0x10800
1968 /* [RW 1] Input enable for TX Debug packet */
1969 #define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc
1970 /* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all
1971 packets from PBFare not forwarded to the MAC and just deleted from FIFO.
1972 First packet may be deleted from the middle. And last packet will be
1973 always deleted till the end. */
1974 #define NIG_REG_EGRESS_DRAIN0_MODE 0x10060
1975 /* [RW 1] Output enable to EMAC0 */
1976 #define NIG_REG_EGRESS_EMAC0_OUT_EN 0x10120
1977 /* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs
1978 to emac for port0; other way to bmac for port0 */
1979 #define NIG_REG_EGRESS_EMAC0_PORT 0x10058
1980 /* [RW 1] Input enable for TX PBF user packet port0 IF */
1981 #define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc
1982 /* [RW 1] Input enable for TX PBF user packet port1 IF */
1983 #define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0
1984 /* [RW 1] Input enable for TX UMP management packet port0 IF */
1985 #define NIG_REG_EGRESS_UMP0_IN_EN 0x100d4
1986 /* [RW 1] Input enable for RX_EMAC0 IF */
1987 #define NIG_REG_EMAC0_IN_EN 0x100a4
1988 /* [RW 1] output enable for TX EMAC pause port 0 IF */
1989 #define NIG_REG_EMAC0_PAUSE_OUT_EN 0x10118
1990 /* [R 1] status from emac0. This bit is set when MDINT from either the
1991 EXT_MDINT pin or from the Copper PHY is driven low. This condition must
1992 be cleared in the attached PHY device that is driving the MINT pin. */
1993 #define NIG_REG_EMAC0_STATUS_MISC_MI_INT 0x10494
1994 /* [WB 48] This address space contains BMAC0 registers. The BMAC registers
1995 are described in appendix A. In order to access the BMAC0 registers; the
1996 base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be
1997 added to each BMAC register offset */
1998 #define NIG_REG_INGRESS_BMAC0_MEM 0x10c00
1999 /* [WB 48] This address space contains BMAC1 registers. The BMAC registers
2000 are described in appendix A. In order to access the BMAC0 registers; the
2001 base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be
2002 added to each BMAC register offset */
2003 #define NIG_REG_INGRESS_BMAC1_MEM 0x11000
2004 /* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */
2005 #define NIG_REG_INGRESS_EOP_LB_EMPTY 0x104e0
2006 /* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data
2007 packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */
2008 #define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4
2009 /* [RW 27] 0 - must be active for Everest A0; 1- for Everest B0 when latch
2010 logic for interrupts must be used. Enable per bit of interrupt of
2011 ~latch_status.latch_status */
2012 #define NIG_REG_LATCH_BC_0 0x16210
2013 /* [RW 27] Latch for each interrupt from Unicore.b[0]
2014 status_emac0_misc_mi_int; b[1] status_emac0_misc_mi_complete;
2015 b[2]status_emac0_misc_cfg_change; b[3]status_emac0_misc_link_status;
2016 b[4]status_emac0_misc_link_change; b[5]status_emac0_misc_attn;
2017 b[6]status_serdes0_mac_crs; b[7]status_serdes0_autoneg_complete;
2018 b[8]status_serdes0_fiber_rxact; b[9]status_serdes0_link_status;
2019 b[10]status_serdes0_mr_page_rx; b[11]status_serdes0_cl73_an_complete;
2020 b[12]status_serdes0_cl73_mr_page_rx; b[13]status_serdes0_rx_sigdet;
2021 b[14]status_xgxs0_remotemdioreq; b[15]status_xgxs0_link10g;
2022 b[16]status_xgxs0_autoneg_complete; b[17]status_xgxs0_fiber_rxact;
2023 b[21:18]status_xgxs0_link_status; b[22]status_xgxs0_mr_page_rx;
2024 b[23]status_xgxs0_cl73_an_complete; b[24]status_xgxs0_cl73_mr_page_rx;
2025 b[25]status_xgxs0_rx_sigdet; b[26]status_xgxs0_mac_crs */
2026 #define NIG_REG_LATCH_STATUS_0 0x18000
2027 /* [RW 1] led 10g for port 0 */
2028 #define NIG_REG_LED_10G_P0 0x10320
2029 /* [RW 1] led 10g for port 1 */
2030 #define NIG_REG_LED_10G_P1 0x10324
2031 /* [RW 1] Port0: This bit is set to enable the use of the
2032 ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field
2033 defined below. If this bit is cleared; then the blink rate will be about
2034 8Hz. */
2035 #define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 0x10318
2036 /* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for
2037 Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field
2038 is reset to 0x080; giving a default blink period of approximately 8Hz. */
2039 #define NIG_REG_LED_CONTROL_BLINK_RATE_P0 0x10310
2040 /* [RW 1] Port0: If set along with the
2041 ~nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0
2042 bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED
2043 bit; the Traffic LED will blink with the blink rate specified in
2044 ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
2045 ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
2046 fields. */
2047 #define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 0x10308
2048 /* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The
2049 Traffic LED will then be controlled via bit ~nig_registers_
2050 led_control_traffic_p0.led_control_traffic_p0 and bit
2051 ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0 */
2052 #define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 0x102f8
2053 /* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit;
2054 turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also
2055 set; the LED will blink with blink rate specified in
2056 ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
2057 ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
2058 fields. */
2059 #define NIG_REG_LED_CONTROL_TRAFFIC_P0 0x10300
2060 /* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3;
2061 9-11PHY7; 12 MAC4; 13-15 PHY10; */
2062 #define NIG_REG_LED_MODE_P0 0x102f0
2063 /* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1-
2064 tsdm enable; b2- usdm enable */
2065 #define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 0x16070
2066 #define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 0x16074
2067 /* [RW 1] SAFC enable for port0. This register may get 1 only when
2068 ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same
2069 port */
2070 #define NIG_REG_LLFC_ENABLE_0 0x16208
2071 #define NIG_REG_LLFC_ENABLE_1 0x1620c
2072 /* [RW 16] classes are high-priority for port0 */
2073 #define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058
2074 #define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 0x1605c
2075 /* [RW 16] classes are low-priority for port0 */
2076 #define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060
2077 #define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 0x16064
2078 /* [RW 1] Output enable of message to LLFC BMAC IF for port0 */
2079 #define NIG_REG_LLFC_OUT_EN_0 0x160c8
2080 #define NIG_REG_LLFC_OUT_EN_1 0x160cc
2081 #define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c
2082 #define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154
2083 #define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244
2084 #define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048
2085 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
2086 #define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c
2087 /* [RW 2] Determine the classification participants. 0: no classification.1:
2088 classification upon VLAN id. 2: classification upon MAC address. 3:
2089 classification upon both VLAN id & MAC addr. */
2090 #define NIG_REG_LLH0_CLS_TYPE 0x16080
2091 /* [RW 32] cm header for llh0 */
2092 #define NIG_REG_LLH0_CM_HEADER 0x1007c
2093 #define NIG_REG_LLH0_DEST_IP_0_1 0x101dc
2094 #define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0
2095 /* [RW 16] destination TCP address 1. The LLH will look for this address in
2096 all incoming packets. */
2097 #define NIG_REG_LLH0_DEST_TCP_0 0x10220
2098 /* [RW 16] destination UDP address 1 The LLH will look for this address in
2099 all incoming packets. */
2100 #define NIG_REG_LLH0_DEST_UDP_0 0x10214
2101 #define NIG_REG_LLH0_ERROR_MASK 0x1008c
2102 /* [RW 8] event id for llh0 */
2103 #define NIG_REG_LLH0_EVENT_ID 0x10084
2104 #define NIG_REG_LLH0_FUNC_EN 0x160fc
2105 #define NIG_REG_LLH0_FUNC_MEM 0x16180
2106 #define NIG_REG_LLH0_FUNC_MEM_ENABLE 0x16140
2107 #define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100
2108 /* [RW 1] Determine the IP version to look for in
2109 ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */
2110 #define NIG_REG_LLH0_IPV4_IPV6_0 0x10208
2111 /* [RW 1] t bit for llh0 */
2112 #define NIG_REG_LLH0_T_BIT 0x10074
2113 /* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */
2114 #define NIG_REG_LLH0_VLAN_ID_0 0x1022c
2115 /* [RW 8] init credit counter for port0 in LLH */
2116 #define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554
2117 #define NIG_REG_LLH0_XCM_MASK 0x10130
2118 #define NIG_REG_LLH1_BRB1_DRV_MASK 0x10248
2119 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
2120 #define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc
2121 /* [RW 2] Determine the classification participants. 0: no classification.1:
2122 classification upon VLAN id. 2: classification upon MAC address. 3:
2123 classification upon both VLAN id & MAC addr. */
2124 #define NIG_REG_LLH1_CLS_TYPE 0x16084
2125 /* [RW 32] cm header for llh1 */
2126 #define NIG_REG_LLH1_CM_HEADER 0x10080
2127 #define NIG_REG_LLH1_ERROR_MASK 0x10090
2128 /* [RW 8] event id for llh1 */
2129 #define NIG_REG_LLH1_EVENT_ID 0x10088
2130 #define NIG_REG_LLH1_FUNC_EN 0x16104
2131 #define NIG_REG_LLH1_FUNC_MEM 0x161c0
2132 #define NIG_REG_LLH1_FUNC_MEM_ENABLE 0x16160
2133 #define NIG_REG_LLH1_FUNC_MEM_SIZE 16
2134 /* [RW 1] When this bit is set; the LLH will classify the packet before
2135 * sending it to the BRB or calculating WoL on it. This bit controls port 1
2136 * only. The legacy llh_multi_function_mode bit controls port 0. */
2137 #define NIG_REG_LLH1_MF_MODE 0x18614
2138 /* [RW 8] init credit counter for port1 in LLH */
2139 #define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564
2140 #define NIG_REG_LLH1_XCM_MASK 0x10134
2141 /* [RW 1] When this bit is set; the LLH will expect all packets to be with
2142 e1hov */
2143 #define NIG_REG_LLH_E1HOV_MODE 0x160d8
2144 /* [RW 16] Outer VLAN type identifier for multi-function mode. In non
2145 * multi-function mode; it will hold the inner VLAN type. Typically 0x8100.
2146 */
2147 #define NIG_REG_LLH_E1HOV_TYPE_1 0x16028
2148 /* [RW 1] When this bit is set; the LLH will classify the packet before
2149 sending it to the BRB or calculating WoL on it. */
2150 #define NIG_REG_LLH_MF_MODE 0x16024
2151 #define NIG_REG_MASK_INTERRUPT_PORT0 0x10330
2152 #define NIG_REG_MASK_INTERRUPT_PORT1 0x10334
2153 /* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */
2154 #define NIG_REG_NIG_EMAC0_EN 0x1003c
2155 /* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */
2156 #define NIG_REG_NIG_EMAC1_EN 0x10040
2157 /* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the
2158 EMAC0 to strip the CRC from the ingress packets. */
2159 #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044
2160 /* [R 32] Interrupt register #0 read */
2161 #define NIG_REG_NIG_INT_STS_0 0x103b0
2162 #define NIG_REG_NIG_INT_STS_1 0x103c0
2163 /* [RC 32] Interrupt register #0 read clear */
2164 #define NIG_REG_NIG_INT_STS_CLR_0 0x103b4
2165 /* [R 32] Legacy E1 and E1H location for parity error mask register. */
2166 #define NIG_REG_NIG_PRTY_MASK 0x103dc
2167 /* [RW 32] Parity mask register #0 read/write */
2168 #define NIG_REG_NIG_PRTY_MASK_0 0x183c8
2169 #define NIG_REG_NIG_PRTY_MASK_1 0x183d8
2170 /* [R 32] Legacy E1 and E1H location for parity error status register. */
2171 #define NIG_REG_NIG_PRTY_STS 0x103d0
2172 /* [R 32] Parity register #0 read */
2173 #define NIG_REG_NIG_PRTY_STS_0 0x183bc
2174 #define NIG_REG_NIG_PRTY_STS_1 0x183cc
2175 /* [R 32] Legacy E1 and E1H location for parity error status clear register. */
2176 #define NIG_REG_NIG_PRTY_STS_CLR 0x103d4
2177 /* [RC 32] Parity register #0 read clear */
2178 #define NIG_REG_NIG_PRTY_STS_CLR_0 0x183c0
2179 #define NIG_REG_NIG_PRTY_STS_CLR_1 0x183d0
2180 #define MCPR_IMC_COMMAND_ENABLE (1L<<31)
2181 #define MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT 16
2182 #define MCPR_IMC_COMMAND_OPERATION_BITSHIFT 28
2183 #define MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT 8
2184 /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
2185 * Ethernet header. */
2186 #define NIG_REG_P0_HDRS_AFTER_BASIC 0x18038
2187 /* [RW 1] HW PFC enable bit. Set this bit to enable the PFC functionality in
2188 * the NIG. Other flow control modes such as PAUSE and SAFC/LLFC should be
2189 * disabled when this bit is set. */
2190 #define NIG_REG_P0_HWPFC_ENABLE 0x18078
2191 #define NIG_REG_P0_LLH_FUNC_MEM2 0x18480
2192 #define NIG_REG_P0_LLH_FUNC_MEM2_ENABLE 0x18440
2193 /* [RW 17] Packet TimeSync information that is buffered in 1-deep FIFOs for
2194 * the host. Bits [15:0] return the sequence ID of the packet. Bit 16
2195 * indicates the validity of the data in the buffer. Writing a 1 to bit 16
2196 * will clear the buffer.
2197 */
2198 #define NIG_REG_P0_LLH_PTP_HOST_BUF_SEQID 0x1875c
2199 /* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
2200 * the host. This location returns the lower 32 bits of timestamp value.
2201 */
2202 #define NIG_REG_P0_LLH_PTP_HOST_BUF_TS_LSB 0x18754
2203 /* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
2204 * the host. This location returns the upper 32 bits of timestamp value.
2205 */
2206 #define NIG_REG_P0_LLH_PTP_HOST_BUF_TS_MSB 0x18758
2207 /* [RW 11] Mask register for the various parameters used in determining PTP
2208 * packet presence. Set each bit to 1 to mask out the particular parameter.
2209 * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
2210 * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
2211 * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
2212 * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
2213 * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
2214 * MAC DA 2. The reset default is set to mask out all parameters.
2215 */
2216 #define NIG_REG_P0_LLH_PTP_PARAM_MASK 0x187a0
2217 /* [RW 14] Mask register for the rules used in detecting PTP packets. Set
2218 * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
2219 * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
2220 * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
2221 * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
2222 * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
2223 * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
2224 * default is to mask out all of the rules. Note that rules 0-3 are for IPv4
2225 * packets only and require that the packet is IPv4 for the rules to match.
2226 * Note that rules 4-7 are for IPv6 packets only and require that the packet
2227 * is IPv6 for the rules to match.
2228 */
2229 #define NIG_REG_P0_LLH_PTP_RULE_MASK 0x187a4
2230 /* [RW 1] Set to 1 to enable PTP packets to be forwarded to the host. */
2231 #define NIG_REG_P0_LLH_PTP_TO_HOST 0x187ac
2232 /* [RW 1] Input enable for RX MAC interface. */
2233 #define NIG_REG_P0_MAC_IN_EN 0x185ac
2234 /* [RW 1] Output enable for TX MAC interface */
2235 #define NIG_REG_P0_MAC_OUT_EN 0x185b0
2236 /* [RW 1] Output enable for TX PAUSE signal to the MAC. */
2237 #define NIG_REG_P0_MAC_PAUSE_OUT_EN 0x185b4
2238 /* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
2239 * future expansion) each priorty is to be mapped to. Bits 3:0 specify the
2240 * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
2241 * priority field is extracted from the outer-most VLAN in receive packet.
2242 * Only COS 0 and COS 1 are supported in E2. */
2243 #define NIG_REG_P0_PKT_PRIORITY_TO_COS 0x18054
2244 /* [RW 6] Enable for TimeSync feature. Bits [2:0] are for RX side. Bits
2245 * [5:3] are for TX side. Bit 0 enables TimeSync on RX side. Bit 1 enables
2246 * V1 frame format in timesync event detection on RX side. Bit 2 enables V2
2247 * frame format in timesync event detection on RX side. Bit 3 enables
2248 * TimeSync on TX side. Bit 4 enables V1 frame format in timesync event
2249 * detection on TX side. Bit 5 enables V2 frame format in timesync event
2250 * detection on TX side. Note that for HW to detect PTP packet and extract
2251 * data from the packet, at least one of the version bits of that traffic
2252 * direction has to be enabled.
2253 */
2254 #define NIG_REG_P0_PTP_EN 0x18788
2255 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A
2256 * priority is mapped to COS 0 when the corresponding mask bit is 1. More
2257 * than one bit may be set; allowing multiple priorities to be mapped to one
2258 * COS. */
2259 #define NIG_REG_P0_RX_COS0_PRIORITY_MASK 0x18058
2260 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A
2261 * priority is mapped to COS 1 when the corresponding mask bit is 1. More
2262 * than one bit may be set; allowing multiple priorities to be mapped to one
2263 * COS. */
2264 #define NIG_REG_P0_RX_COS1_PRIORITY_MASK 0x1805c
2265 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 2. A
2266 * priority is mapped to COS 2 when the corresponding mask bit is 1. More
2267 * than one bit may be set; allowing multiple priorities to be mapped to one
2268 * COS. */
2269 #define NIG_REG_P0_RX_COS2_PRIORITY_MASK 0x186b0
2270 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 3. A
2271 * priority is mapped to COS 3 when the corresponding mask bit is 1. More
2272 * than one bit may be set; allowing multiple priorities to be mapped to one
2273 * COS. */
2274 #define NIG_REG_P0_RX_COS3_PRIORITY_MASK 0x186b4
2275 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 4. A
2276 * priority is mapped to COS 4 when the corresponding mask bit is 1. More
2277 * than one bit may be set; allowing multiple priorities to be mapped to one
2278 * COS. */
2279 #define NIG_REG_P0_RX_COS4_PRIORITY_MASK 0x186b8
2280 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 5. A
2281 * priority is mapped to COS 5 when the corresponding mask bit is 1. More
2282 * than one bit may be set; allowing multiple priorities to be mapped to one
2283 * COS. */
2284 #define NIG_REG_P0_RX_COS5_PRIORITY_MASK 0x186bc
2285 /* [R 1] RX FIFO for receiving data from MAC is empty. */
2286 /* [RW 15] Specify which of the credit registers the client is to be mapped
2287 * to. Bits[2:0] are for client 0; bits [14:12] are for client 4. For
2288 * clients that are not subject to WFQ credit blocking - their
2289 * specifications here are not used. */
2290 #define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP 0x180f0
2291 /* [RW 32] Specify which of the credit registers the client is to be mapped
2292 * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are
2293 * for client 0; bits [35:32] are for client 8. For clients that are not
2294 * subject to WFQ credit blocking - their specifications here are not used.
2295 * This is a new register (with 2_) added in E3 B0 to accommodate the 9
2296 * input clients to ETS arbiter. The reset default is set for management and
2297 * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
2298 * use credit registers 0-5 respectively (0x543210876). Note that credit
2299 * registers can not be shared between clients. */
2300 #define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_LSB 0x18688
2301 /* [RW 4] Specify which of the credit registers the client is to be mapped
2302 * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are
2303 * for client 0; bits [35:32] are for client 8. For clients that are not
2304 * subject to WFQ credit blocking - their specifications here are not used.
2305 * This is a new register (with 2_) added in E3 B0 to accommodate the 9
2306 * input clients to ETS arbiter. The reset default is set for management and
2307 * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
2308 * use credit registers 0-5 respectively (0x543210876). Note that credit
2309 * registers can not be shared between clients. */
2310 #define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP2_MSB 0x1868c
2311 /* [RW 5] Specify whether the client competes directly in the strict
2312 * priority arbiter. The bits are mapped according to client ID (client IDs
2313 * are defined in tx_arb_priority_client). Default value is set to enable
2314 * strict priorities for clients 0-2 -- management and debug traffic. */
2315 #define NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT 0x180e8
2316 /* [RW 5] Specify whether the client is subject to WFQ credit blocking. The
2317 * bits are mapped according to client ID (client IDs are defined in
2318 * tx_arb_priority_client). Default value is 0 for not using WFQ credit
2319 * blocking. */
2320 #define NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x180ec
2321 /* [RW 32] Specify the upper bound that credit register 0 is allowed to
2322 * reach. */
2323 #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0 0x1810c
2324 #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1 0x18110
2325 #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_2 0x18114
2326 #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_3 0x18118
2327 #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_4 0x1811c
2328 #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_5 0x186a0
2329 #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_6 0x186a4
2330 #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_7 0x186a8
2331 #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_8 0x186ac
2332 /* [RW 32] Specify the weight (in bytes) to be added to credit register 0
2333 * when it is time to increment. */
2334 #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0 0x180f8
2335 #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1 0x180fc
2336 #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_2 0x18100
2337 #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_3 0x18104
2338 #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_4 0x18108
2339 #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_5 0x18690
2340 #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_6 0x18694
2341 #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_7 0x18698
2342 #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_8 0x1869c
2343 /* [RW 12] Specify the number of strict priority arbitration slots between
2344 * two round-robin arbitration slots to avoid starvation. A value of 0 means
2345 * no strict priority cycles - the strict priority with anti-starvation
2346 * arbiter becomes a round-robin arbiter. */
2347 #define NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS 0x180f4
2348 /* [RW 15] Specify the client number to be assigned to each priority of the
2349 * strict priority arbiter. Priority 0 is the highest priority. Bits [2:0]
2350 * are for priority 0 client; bits [14:12] are for priority 4 client. The
2351 * clients are assigned the following IDs: 0-management; 1-debug traffic
2352 * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1
2353 * traffic. The reset value[14:0] is set to 0x4688 (15'b100_011_010_001_000)
2354 * for management at priority 0; debug traffic at priorities 1 and 2; COS0
2355 * traffic at priority 3; and COS1 traffic at priority 4. */
2356 #define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT 0x180e4
2357 /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
2358 * Ethernet header. */
2359 #define NIG_REG_P1_HDRS_AFTER_BASIC 0x1818c
2360 #define NIG_REG_P1_LLH_FUNC_MEM2 0x184c0
2361 #define NIG_REG_P1_LLH_FUNC_MEM2_ENABLE 0x18460a
2362 /* [RW 17] Packet TimeSync information that is buffered in 1-deep FIFOs for
2363 * the host. Bits [15:0] return the sequence ID of the packet. Bit 16
2364 * indicates the validity of the data in the buffer. Writing a 1 to bit 16
2365 * will clear the buffer.
2366 */
2367 #define NIG_REG_P1_LLH_PTP_HOST_BUF_SEQID 0x18774
2368 /* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
2369 * the host. This location returns the lower 32 bits of timestamp value.
2370 */
2371 #define NIG_REG_P1_LLH_PTP_HOST_BUF_TS_LSB 0x1876c
2372 /* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
2373 * the host. This location returns the upper 32 bits of timestamp value.
2374 */
2375 #define NIG_REG_P1_LLH_PTP_HOST_BUF_TS_MSB 0x18770
2376 /* [RW 11] Mask register for the various parameters used in determining PTP
2377 * packet presence. Set each bit to 1 to mask out the particular parameter.
2378 * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
2379 * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
2380 * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
2381 * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
2382 * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
2383 * MAC DA 2. The reset default is set to mask out all parameters.
2384 */
2385 #define NIG_REG_P1_LLH_PTP_PARAM_MASK 0x187c8
2386 /* [RW 14] Mask register for the rules used in detecting PTP packets. Set
2387 * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
2388 * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
2389 * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
2390 * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
2391 * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
2392 * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
2393 * default is to mask out all of the rules. Note that rules 0-3 are for IPv4
2394 * packets only and require that the packet is IPv4 for the rules to match.
2395 * Note that rules 4-7 are for IPv6 packets only and require that the packet
2396 * is IPv6 for the rules to match.
2397 */
2398 #define NIG_REG_P1_LLH_PTP_RULE_MASK 0x187cc
2399 /* [RW 1] Set to 1 to enable PTP packets to be forwarded to the host. */
2400 #define NIG_REG_P1_LLH_PTP_TO_HOST 0x187d4
2401 /* [RW 32] Specify the client number to be assigned to each priority of the
2402 * strict priority arbiter. This register specifies bits 31:0 of the 36-bit
2403 * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
2404 * client; bits [35-32] are for priority 8 client. The clients are assigned
2405 * the following IDs: 0-management; 1-debug traffic from this port; 2-debug
2406 * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic;
2407 * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is
2408 * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
2409 * accommodate the 9 input clients to ETS arbiter. */
2410 #define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_LSB 0x18680
2411 /* [RW 4] Specify the client number to be assigned to each priority of the
2412 * strict priority arbiter. This register specifies bits 35:32 of the 36-bit
2413 * value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
2414 * client; bits [35-32] are for priority 8 client. The clients are assigned
2415 * the following IDs: 0-management; 1-debug traffic from this port; 2-debug
2416 * traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic;
2417 * 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is
2418 * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
2419 * accommodate the 9 input clients to ETS arbiter. */
2420 #define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB 0x18684
2421 /* [RW 1] MCP-to-host path enable. Set this bit to enable the routing of MCP
2422 * packets to BRB LB interface to forward the packet to the host. All
2423 * packets from MCP are forwarded to the network when this bit is cleared -
2424 * regardless of the configured destination in tx_mng_destination register.
2425 * When MCP-to-host paths for both ports 0 and 1 are disabled - the arbiter
2426 * for BRB LB interface is bypassed and PBF LB traffic is always selected to
2427 * send to BRB LB.
2428 */
2429 #define NIG_REG_P0_TX_MNG_HOST_ENABLE 0x182f4
2430 #define NIG_REG_P1_HWPFC_ENABLE 0x181d0
2431 #define NIG_REG_P1_MAC_IN_EN 0x185c0
2432 /* [RW 1] Output enable for TX MAC interface */
2433 #define NIG_REG_P1_MAC_OUT_EN 0x185c4
2434 /* [RW 1] Output enable for TX PAUSE signal to the MAC. */
2435 #define NIG_REG_P1_MAC_PAUSE_OUT_EN 0x185c8
2436 /* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
2437 * future expansion) each priorty is to be mapped to. Bits 3:0 specify the
2438 * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
2439 * priority field is extracted from the outer-most VLAN in receive packet.
2440 * Only COS 0 and COS 1 are supported in E2. */
2441 #define NIG_REG_P1_PKT_PRIORITY_TO_COS 0x181a8
2442 /* [RW 6] Enable for TimeSync feature. Bits [2:0] are for RX side. Bits
2443 * [5:3] are for TX side. Bit 0 enables TimeSync on RX side. Bit 1 enables
2444 * V1 frame format in timesync event detection on RX side. Bit 2 enables V2
2445 * frame format in timesync event detection on RX side. Bit 3 enables
2446 * TimeSync on TX side. Bit 4 enables V1 frame format in timesync event
2447 * detection on TX side. Bit 5 enables V2 frame format in timesync event
2448 * detection on TX side. Note that for HW to detect PTP packet and extract
2449 * data from the packet, at least one of the version bits of that traffic
2450 * direction has to be enabled.
2451 */
2452 #define NIG_REG_P1_PTP_EN 0x187b0
2453 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A
2454 * priority is mapped to COS 0 when the corresponding mask bit is 1. More
2455 * than one bit may be set; allowing multiple priorities to be mapped to one
2456 * COS. */
2457 #define NIG_REG_P1_RX_COS0_PRIORITY_MASK 0x181ac
2458 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A
2459 * priority is mapped to COS 1 when the corresponding mask bit is 1. More
2460 * than one bit may be set; allowing multiple priorities to be mapped to one
2461 * COS. */
2462 #define NIG_REG_P1_RX_COS1_PRIORITY_MASK 0x181b0
2463 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 2. A
2464 * priority is mapped to COS 2 when the corresponding mask bit is 1. More
2465 * than one bit may be set; allowing multiple priorities to be mapped to one
2466 * COS. */
2467 #define NIG_REG_P1_RX_COS2_PRIORITY_MASK 0x186f8
2468 /* [R 1] RX FIFO for receiving data from MAC is empty. */
2469 #define NIG_REG_P1_RX_MACFIFO_EMPTY 0x1858c
2470 /* [R 1] TLLH FIFO is empty. */
2471 #define NIG_REG_P1_TLLH_FIFO_EMPTY 0x18338
2472 /* [RW 19] Packet TimeSync information that is buffered in 1-deep FIFOs for
2473 * TX side. Bits [15:0] reflect the sequence ID of the packet. Bit 16
2474 * indicates the validity of the data in the buffer. Bit 17 indicates that
2475 * the sequence ID is valid and it is waiting for the TX timestamp value.
2476 * Bit 18 indicates whether the timestamp is from a SW request (value of 1)
2477 * or HW request (value of 0). Writing a 1 to bit 16 will clear the buffer.
2478 */
2479 #define NIG_REG_P0_TLLH_PTP_BUF_SEQID 0x187e0
2480 /* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
2481 * MCP. This location returns the lower 32 bits of timestamp value.
2482 */
2483 #define NIG_REG_P0_TLLH_PTP_BUF_TS_LSB 0x187d8
2484 /* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
2485 * MCP. This location returns the upper 32 bits of timestamp value.
2486 */
2487 #define NIG_REG_P0_TLLH_PTP_BUF_TS_MSB 0x187dc
2488 /* [RW 11] Mask register for the various parameters used in determining PTP
2489 * packet presence. Set each bit to 1 to mask out the particular parameter.
2490 * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
2491 * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
2492 * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
2493 * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
2494 * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
2495 * MAC DA 2. The reset default is set to mask out all parameters.
2496 */
2497 #define NIG_REG_P0_TLLH_PTP_PARAM_MASK 0x187f0
2498 /* [RW 14] Mask register for the rules used in detecting PTP packets. Set
2499 * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
2500 * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
2501 * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
2502 * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
2503 * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
2504 * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
2505 * default is to mask out all of the rules.
2506 */
2507 #define NIG_REG_P0_TLLH_PTP_RULE_MASK 0x187f4
2508 /* [RW 19] Packet TimeSync information that is buffered in 1-deep FIFOs for
2509 * TX side. Bits [15:0] reflect the sequence ID of the packet. Bit 16
2510 * indicates the validity of the data in the buffer. Bit 17 indicates that
2511 * the sequence ID is valid and it is waiting for the TX timestamp value.
2512 * Bit 18 indicates whether the timestamp is from a SW request (value of 1)
2513 * or HW request (value of 0). Writing a 1 to bit 16 will clear the buffer.
2514 */
2515 #define NIG_REG_P1_TLLH_PTP_BUF_SEQID 0x187ec
2516 /* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
2517 * MCP. This location returns the lower 32 bits of timestamp value.
2518 */
2519 #define NIG_REG_P1_TLLH_PTP_BUF_TS_LSB 0x187e4
2520 /* [R 32] Packet TimeSync information that is buffered in 1-deep FIFOs for
2521 * MCP. This location returns the upper 32 bits of timestamp value.
2522 */
2523 #define NIG_REG_P1_TLLH_PTP_BUF_TS_MSB 0x187e8
2524 /* [RW 11] Mask register for the various parameters used in determining PTP
2525 * packet presence. Set each bit to 1 to mask out the particular parameter.
2526 * 0-IPv4 DA 0 of 224.0.1.129. 1-IPv4 DA 1 of 224.0.0.107. 2-IPv6 DA 0 of
2527 * 0xFF0*:0:0:0:0:0:0:181. 3-IPv6 DA 1 of 0xFF02:0:0:0:0:0:0:6B. 4-UDP
2528 * destination port 0 of 319. 5-UDP destination port 1 of 320. 6-MAC
2529 * Ethertype 0 of 0x88F7. 7-configurable MAC Ethertype 1. 8-MAC DA 0 of
2530 * 0x01-1B-19-00-00-00. 9-MAC DA 1 of 0x01-80-C2-00-00-0E. 10-configurable
2531 * MAC DA 2. The reset default is set to mask out all parameters.
2532 */
2533 #define NIG_REG_P1_TLLH_PTP_PARAM_MASK 0x187f8
2534 /* [RW 14] Mask register for the rules used in detecting PTP packets. Set
2535 * each bit to 1 to mask out that particular rule. 0-{IPv4 DA 0; UDP DP 0} .
2536 * 1-{IPv4 DA 0; UDP DP 1} . 2-{IPv4 DA 1; UDP DP 0} . 3-{IPv4 DA 1; UDP DP
2537 * 1} . 4-{IPv6 DA 0; UDP DP 0} . 5-{IPv6 DA 0; UDP DP 1} . 6-{IPv6 DA 1;
2538 * UDP DP 0} . 7-{IPv6 DA 1; UDP DP 1} . 8-{MAC DA 0; Ethertype 0} . 9-{MAC
2539 * DA 1; Ethertype 0} . 10-{MAC DA 0; Ethertype 1} . 11-{MAC DA 1; Ethertype
2540 * 1} . 12-{MAC DA 2; Ethertype 0} . 13-{MAC DA 2; Ethertype 1} . The reset
2541 * default is to mask out all of the rules.
2542 */
2543 #define NIG_REG_P1_TLLH_PTP_RULE_MASK 0x187fc
2544 /* [RW 32] Specify which of the credit registers the client is to be mapped
2545 * to. This register specifies bits 31:0 of the 36-bit value. Bits[3:0] are
2546 * for client 0; bits [35:32] are for client 8. For clients that are not
2547 * subject to WFQ credit blocking - their specifications here are not used.
2548 * This is a new register (with 2_) added in E3 B0 to accommodate the 9
2549 * input clients to ETS arbiter. The reset default is set for management and
2550 * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
2551 * use credit registers 0-5 respectively (0x543210876). Note that credit
2552 * registers can not be shared between clients. Note also that there are
2553 * only COS0-2 in port 1- there is a total of 6 clients in port 1. Only
2554 * credit registers 0-5 are valid. This register should be configured
2555 * appropriately before enabling WFQ. */
2556 #define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_LSB 0x186e8
2557 /* [RW 4] Specify which of the credit registers the client is to be mapped
2558 * to. This register specifies bits 35:32 of the 36-bit value. Bits[3:0] are
2559 * for client 0; bits [35:32] are for client 8. For clients that are not
2560 * subject to WFQ credit blocking - their specifications here are not used.
2561 * This is a new register (with 2_) added in E3 B0 to accommodate the 9
2562 * input clients to ETS arbiter. The reset default is set for management and
2563 * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
2564 * use credit registers 0-5 respectively (0x543210876). Note that credit
2565 * registers can not be shared between clients. Note also that there are
2566 * only COS0-2 in port 1- there is a total of 6 clients in port 1. Only
2567 * credit registers 0-5 are valid. This register should be configured
2568 * appropriately before enabling WFQ. */
2569 #define NIG_REG_P1_TX_ARB_CLIENT_CREDIT_MAP2_MSB 0x186ec
2570 /* [RW 9] Specify whether the client competes directly in the strict
2571 * priority arbiter. The bits are mapped according to client ID (client IDs
2572 * are defined in tx_arb_priority_client2): 0-management; 1-debug traffic
2573 * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1
2574 * traffic; 5-COS2 traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic.
2575 * Default value is set to enable strict priorities for all clients. */
2576 #define NIG_REG_P1_TX_ARB_CLIENT_IS_STRICT 0x18234
2577 /* [RW 9] Specify whether the client is subject to WFQ credit blocking. The
2578 * bits are mapped according to client ID (client IDs are defined in
2579 * tx_arb_priority_client2): 0-management; 1-debug traffic from this port;
2580 * 2-debug traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2
2581 * traffic; 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. Default value is
2582 * 0 for not using WFQ credit blocking. */
2583 #define NIG_REG_P1_TX_ARB_CLIENT_IS_SUBJECT2WFQ 0x18238
2584 #define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_0 0x18258
2585 #define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_1 0x1825c
2586 #define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_2 0x18260
2587 #define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_3 0x18264
2588 #define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_4 0x18268
2589 #define NIG_REG_P1_TX_ARB_CREDIT_UPPER_BOUND_5 0x186f4
2590 /* [RW 32] Specify the weight (in bytes) to be added to credit register 0
2591 * when it is time to increment. */
2592 #define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_0 0x18244
2593 #define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_1 0x18248
2594 #define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_2 0x1824c
2595 #define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_3 0x18250
2596 #define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_4 0x18254
2597 #define NIG_REG_P1_TX_ARB_CREDIT_WEIGHT_5 0x186f0
2598 /* [RW 12] Specify the number of strict priority arbitration slots between
2599 two round-robin arbitration slots to avoid starvation. A value of 0 means
2600 no strict priority cycles - the strict priority with anti-starvation
2601 arbiter becomes a round-robin arbiter. */
2602 #define NIG_REG_P1_TX_ARB_NUM_STRICT_ARB_SLOTS 0x18240
2603 /* [RW 32] Specify the client number to be assigned to each priority of the
2604 strict priority arbiter. This register specifies bits 31:0 of the 36-bit
2605 value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
2606 client; bits [35-32] are for priority 8 client. The clients are assigned
2607 the following IDs: 0-management; 1-debug traffic from this port; 2-debug
2608 traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic;
2609 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is
2610 set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
2611 accommodate the 9 input clients to ETS arbiter. Note that this register
2612 is the same as the one for port 0, except that port 1 only has COS 0-2
2613 traffic. There is no traffic for COS 3-5 of port 1. */
2614 #define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_LSB 0x186e0
2615 /* [RW 4] Specify the client number to be assigned to each priority of the
2616 strict priority arbiter. This register specifies bits 35:32 of the 36-bit
2617 value. Priority 0 is the highest priority. Bits [3:0] are for priority 0
2618 client; bits [35-32] are for priority 8 client. The clients are assigned
2619 the following IDs: 0-management; 1-debug traffic from this port; 2-debug
2620 traffic from other port; 3-COS0 traffic; 4-COS1 traffic; 5-COS2 traffic;
2621 6-COS3 traffic; 7-COS4 traffic; 8-COS5 traffic. The reset value[35:0] is
2622 set to 0x345678021. This is a new register (with 2_) added in E3 B0 to
2623 accommodate the 9 input clients to ETS arbiter. Note that this register
2624 is the same as the one for port 0, except that port 1 only has COS 0-2
2625 traffic. There is no traffic for COS 3-5 of port 1. */
2626 #define NIG_REG_P1_TX_ARB_PRIORITY_CLIENT2_MSB 0x186e4
2627 /* [R 1] TX FIFO for transmitting data to MAC is empty. */
2628 #define NIG_REG_P1_TX_MACFIFO_EMPTY 0x18594
2629 /* [RW 1] MCP-to-host path enable. Set this bit to enable the routing of MCP
2630 * packets to BRB LB interface to forward the packet to the host. All
2631 * packets from MCP are forwarded to the network when this bit is cleared -
2632 * regardless of the configured destination in tx_mng_destination register.
2633 */
2634 #define NIG_REG_P1_TX_MNG_HOST_ENABLE 0x182f8
2635 /* [R 1] FIFO empty status of the MCP TX FIFO used for storing MCP packets
2636 forwarded to the host. */
2637 #define NIG_REG_P1_TX_MNG_HOST_FIFO_EMPTY 0x182b8
2638 /* [RW 32] Specify the upper bound that credit register 0 is allowed to
2639 * reach. */
2640 /* [RW 1] Pause enable for port0. This register may get 1 only when
2641 ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same
2642 port */
2643 #define NIG_REG_PAUSE_ENABLE_0 0x160c0
2644 #define NIG_REG_PAUSE_ENABLE_1 0x160c4
2645 /* [RW 1] Input enable for RX PBF LP IF */
2646 #define NIG_REG_PBF_LB_IN_EN 0x100b4
2647 /* [RW 1] Value of this register will be transmitted to port swap when
2648 ~nig_registers_strap_override.strap_override =1 */
2649 #define NIG_REG_PORT_SWAP 0x10394
2650 /* [RW 1] PPP enable for port0. This register may get 1 only when
2651 * ~safc_enable.safc_enable = 0 and pause_enable.pause_enable =0 for the
2652 * same port */
2653 #define NIG_REG_PPP_ENABLE_0 0x160b0
2654 #define NIG_REG_PPP_ENABLE_1 0x160b4
2655 /* [RW 1] output enable for RX parser descriptor IF */
2656 #define NIG_REG_PRS_EOP_OUT_EN 0x10104
2657 /* [RW 1] Input enable for RX parser request IF */
2658 #define NIG_REG_PRS_REQ_IN_EN 0x100b8
2659 /* [RW 5] control to serdes - CL45 DEVAD */
2660 #define NIG_REG_SERDES0_CTRL_MD_DEVAD 0x10370
2661 /* [RW 1] control to serdes; 0 - clause 45; 1 - clause 22 */
2662 #define NIG_REG_SERDES0_CTRL_MD_ST 0x1036c
2663 /* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */
2664 #define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374
2665 /* [R 1] status from serdes0 that inputs to interrupt logic of link status */
2666 #define NIG_REG_SERDES0_STATUS_LINK_STATUS 0x10578
2667 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
2668 for port0 */
2669 #define NIG_REG_STAT0_BRB_DISCARD 0x105f0
2670 /* [R 32] Rx statistics : In user packets truncated due to BRB backpressure
2671 for port0 */
2672 #define NIG_REG_STAT0_BRB_TRUNCATE 0x105f8
2673 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
2674 between 1024 and 1522 bytes for port0 */
2675 #define NIG_REG_STAT0_EGRESS_MAC_PKT0 0x10750
2676 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
2677 between 1523 bytes and above for port0 */
2678 #define NIG_REG_STAT0_EGRESS_MAC_PKT1 0x10760
2679 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
2680 for port1 */
2681 #define NIG_REG_STAT1_BRB_DISCARD 0x10628
2682 /* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
2683 between 1024 and 1522 bytes for port1 */
2684 #define NIG_REG_STAT1_EGRESS_MAC_PKT0 0x107a0
2685 /* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
2686 between 1523 bytes and above for port1 */
2687 #define NIG_REG_STAT1_EGRESS_MAC_PKT1 0x107b0
2688 /* [WB_R 64] Rx statistics : User octets received for LP */
2689 #define NIG_REG_STAT2_BRB_OCTET 0x107e0
2690 #define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328
2691 #define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c
2692 /* [RW 1] port swap mux selection. If this register equal to 0 then port
2693 swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
2694 ort swap is equal to ~nig_registers_port_swap.port_swap */
2695 #define NIG_REG_STRAP_OVERRIDE 0x10398
2696 /* [WB 64] Addresses for TimeSync related registers in the timesync
2697 * generator sub-module.
2698 */
2699 #define NIG_REG_TIMESYNC_GEN_REG 0x18800
2700 /* [RW 1] output enable for RX_XCM0 IF */
2701 #define NIG_REG_XCM0_OUT_EN 0x100f0
2702 /* [RW 1] output enable for RX_XCM1 IF */
2703 #define NIG_REG_XCM1_OUT_EN 0x100f4
2704 /* [RW 1] control to xgxs - remote PHY in-band MDIO */
2705 #define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348
2706 /* [RW 5] control to xgxs - CL45 DEVAD */
2707 #define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c
2708 /* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */
2709 #define NIG_REG_XGXS0_CTRL_MD_ST 0x10338
2710 /* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */
2711 #define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340
2712 /* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */
2713 #define NIG_REG_XGXS0_STATUS_LINK10G 0x10680
2714 /* [R 4] status from xgxs0 that inputs to interrupt logic of link status */
2715 #define NIG_REG_XGXS0_STATUS_LINK_STATUS 0x10684
2716 /* [RW 2] selection for XGXS lane of port 0 in NIG_MUX block */
2717 #define NIG_REG_XGXS_LANE_SEL_P0 0x102e8
2718 /* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */
2719 #define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0
2720 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT (0x1<<0)
2721 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9)
2722 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15)
2723 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18)
2724 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18
2725 /* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter. */
2726 #define PBF_REG_COS0_UPPER_BOUND 0x15c05c
2727 /* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter
2728 * of port 0. */
2729 #define PBF_REG_COS0_UPPER_BOUND_P0 0x15c2cc
2730 /* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter
2731 * of port 1. */
2732 #define PBF_REG_COS0_UPPER_BOUND_P1 0x15c2e4
2733 /* [RW 31] The weight of COS0 in the ETS command arbiter. */
2734 #define PBF_REG_COS0_WEIGHT 0x15c054
2735 /* [RW 31] The weight of COS0 in port 0 ETS command arbiter. */
2736 #define PBF_REG_COS0_WEIGHT_P0 0x15c2a8
2737 /* [RW 31] The weight of COS0 in port 1 ETS command arbiter. */
2738 #define PBF_REG_COS0_WEIGHT_P1 0x15c2c0
2739 /* [RW 31] The upper bound of the weight of COS1 in the ETS command arbiter. */
2740 #define PBF_REG_COS1_UPPER_BOUND 0x15c060
2741 /* [RW 31] The weight of COS1 in the ETS command arbiter. */
2742 #define PBF_REG_COS1_WEIGHT 0x15c058
2743 /* [RW 31] The weight of COS1 in port 0 ETS command arbiter. */
2744 #define PBF_REG_COS1_WEIGHT_P0 0x15c2ac
2745 /* [RW 31] The weight of COS1 in port 1 ETS command arbiter. */
2746 #define PBF_REG_COS1_WEIGHT_P1 0x15c2c4
2747 /* [RW 31] The weight of COS2 in port 0 ETS command arbiter. */
2748 #define PBF_REG_COS2_WEIGHT_P0 0x15c2b0
2749 /* [RW 31] The weight of COS2 in port 1 ETS command arbiter. */
2750 #define PBF_REG_COS2_WEIGHT_P1 0x15c2c8
2751 /* [RW 31] The weight of COS3 in port 0 ETS command arbiter. */
2752 #define PBF_REG_COS3_WEIGHT_P0 0x15c2b4
2753 /* [RW 31] The weight of COS4 in port 0 ETS command arbiter. */
2754 #define PBF_REG_COS4_WEIGHT_P0 0x15c2b8
2755 /* [RW 31] The weight of COS5 in port 0 ETS command arbiter. */
2756 #define PBF_REG_COS5_WEIGHT_P0 0x15c2bc
2757 /* [R 11] Current credit for the LB queue in the tx port buffers in 16 byte
2758 * lines. */
2759 #define PBF_REG_CREDIT_LB_Q 0x140338
2760 /* [R 11] Current credit for queue 0 in the tx port buffers in 16 byte
2761 * lines. */
2762 #define PBF_REG_CREDIT_Q0 0x14033c
2763 /* [R 11] Current credit for queue 1 in the tx port buffers in 16 byte
2764 * lines. */
2765 #define PBF_REG_CREDIT_Q1 0x140340
2766 /* [RW 1] Disable processing further tasks from port 0 (after ending the
2767 current task in process). */
2768 #define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c
2769 /* [RW 1] Disable processing further tasks from port 1 (after ending the
2770 current task in process). */
2771 #define PBF_REG_DISABLE_NEW_TASK_PROC_P1 0x140060
2772 /* [RW 1] Disable processing further tasks from port 4 (after ending the
2773 current task in process). */
2774 #define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c
2775 #define PBF_REG_DISABLE_PF 0x1402e8
2776 #define PBF_REG_DISABLE_VF 0x1402ec
2777 /* [RW 18] For port 0: For each client that is subject to WFQ (the
2778 * corresponding bit is 1); indicates to which of the credit registers this
2779 * client is mapped. For clients which are not credit blocked; their mapping
2780 * is dont care. */
2781 #define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P0 0x15c288
2782 /* [RW 9] For port 1: For each client that is subject to WFQ (the
2783 * corresponding bit is 1); indicates to which of the credit registers this
2784 * client is mapped. For clients which are not credit blocked; their mapping
2785 * is dont care. */
2786 #define PBF_REG_ETS_ARB_CLIENT_CREDIT_MAP_P1 0x15c28c
2787 /* [RW 6] For port 0: Bit per client to indicate if the client competes in
2788 * the strict priority arbiter directly (corresponding bit = 1); or first
2789 * goes to the RR arbiter (corresponding bit = 0); and then competes in the
2790 * lowest priority in the strict-priority arbiter. */
2791 #define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P0 0x15c278
2792 /* [RW 3] For port 1: Bit per client to indicate if the client competes in
2793 * the strict priority arbiter directly (corresponding bit = 1); or first
2794 * goes to the RR arbiter (corresponding bit = 0); and then competes in the
2795 * lowest priority in the strict-priority arbiter. */
2796 #define PBF_REG_ETS_ARB_CLIENT_IS_STRICT_P1 0x15c27c
2797 /* [RW 6] For port 0: Bit per client to indicate if the client is subject to
2798 * WFQ credit blocking (corresponding bit = 1). */
2799 #define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P0 0x15c280
2800 /* [RW 3] For port 0: Bit per client to indicate if the client is subject to
2801 * WFQ credit blocking (corresponding bit = 1). */
2802 #define PBF_REG_ETS_ARB_CLIENT_IS_SUBJECT2WFQ_P1 0x15c284
2803 /* [RW 16] For port 0: The number of strict priority arbitration slots
2804 * between 2 RR arbitration slots. A value of 0 means no strict priority
2805 * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR
2806 * arbiter. */
2807 #define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P0 0x15c2a0
2808 /* [RW 16] For port 1: The number of strict priority arbitration slots
2809 * between 2 RR arbitration slots. A value of 0 means no strict priority
2810 * cycles; i.e. the strict-priority w/ anti-starvation arbiter is a RR
2811 * arbiter. */
2812 #define PBF_REG_ETS_ARB_NUM_STRICT_ARB_SLOTS_P1 0x15c2a4
2813 /* [RW 18] For port 0: Indicates which client is connected to each priority
2814 * in the strict-priority arbiter. Priority 0 is the highest priority, and
2815 * priority 5 is the lowest; to which the RR output is connected to (this is
2816 * not configurable). */
2817 #define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P0 0x15c270
2818 /* [RW 9] For port 1: Indicates which client is connected to each priority
2819 * in the strict-priority arbiter. Priority 0 is the highest priority, and
2820 * priority 5 is the lowest; to which the RR output is connected to (this is
2821 * not configurable). */
2822 #define PBF_REG_ETS_ARB_PRIORITY_CLIENT_P1 0x15c274
2823 /* [RW 1] Indicates that ETS is performed between the COSes in the command
2824 * arbiter. If reset strict priority w/ anti-starvation will be performed
2825 * w/o WFQ. */
2826 #define PBF_REG_ETS_ENABLED 0x15c050
2827 /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
2828 * Ethernet header. */
2829 #define PBF_REG_HDRS_AFTER_BASIC 0x15c0a8
2830 /* [RW 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 */
2831 #define PBF_REG_HDRS_AFTER_TAG_0 0x15c0b8
2832 /* [R 1] Removed for E3 B0 - Indicates which COS is conncted to the highest
2833 * priority in the command arbiter. */
2834 #define PBF_REG_HIGH_PRIORITY_COS_NUM 0x15c04c
2835 #define PBF_REG_IF_ENABLE_REG 0x140044
2836 /* [RW 1] Init bit. When set the initial credits are copied to the credit
2837 registers (except the port credits). Should be set and then reset after
2838 the configuration of the block has ended. */
2839 #define PBF_REG_INIT 0x140000
2840 /* [RW 11] Initial credit for the LB queue in the tx port buffers in 16 byte
2841 * lines. */
2842 #define PBF_REG_INIT_CRD_LB_Q 0x15c248
2843 /* [RW 11] Initial credit for queue 0 in the tx port buffers in 16 byte
2844 * lines. */
2845 #define PBF_REG_INIT_CRD_Q0 0x15c230
2846 /* [RW 11] Initial credit for queue 1 in the tx port buffers in 16 byte
2847 * lines. */
2848 #define PBF_REG_INIT_CRD_Q1 0x15c234
2849 /* [RW 1] Init bit for port 0. When set the initial credit of port 0 is
2850 copied to the credit register. Should be set and then reset after the
2851 configuration of the port has ended. */
2852 #define PBF_REG_INIT_P0 0x140004
2853 /* [RW 1] Init bit for port 1. When set the initial credit of port 1 is
2854 copied to the credit register. Should be set and then reset after the
2855 configuration of the port has ended. */
2856 #define PBF_REG_INIT_P1 0x140008
2857 /* [RW 1] Init bit for port 4. When set the initial credit of port 4 is
2858 copied to the credit register. Should be set and then reset after the
2859 configuration of the port has ended. */
2860 #define PBF_REG_INIT_P4 0x14000c
2861 /* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
2862 * the LB queue. Reset upon init. */
2863 #define PBF_REG_INTERNAL_CRD_FREED_CNT_LB_Q 0x140354
2864 /* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
2865 * queue 0. Reset upon init. */
2866 #define PBF_REG_INTERNAL_CRD_FREED_CNT_Q0 0x140358
2867 /* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
2868 * queue 1. Reset upon init. */
2869 #define PBF_REG_INTERNAL_CRD_FREED_CNT_Q1 0x14035c
2870 /* [RW 1] Enable for mac interface 0. */
2871 #define PBF_REG_MAC_IF0_ENABLE 0x140030
2872 /* [RW 1] Enable for mac interface 1. */
2873 #define PBF_REG_MAC_IF1_ENABLE 0x140034
2874 /* [RW 1] Enable for the loopback interface. */
2875 #define PBF_REG_MAC_LB_ENABLE 0x140040
2876 /* [RW 6] Bit-map indicating which headers must appear in the packet */
2877 #define PBF_REG_MUST_HAVE_HDRS 0x15c0c4
2878 /* [RW 16] The number of strict priority arbitration slots between 2 RR
2879 * arbitration slots. A value of 0 means no strict priority cycles; i.e. the
2880 * strict-priority w/ anti-starvation arbiter is a RR arbiter. */
2881 #define PBF_REG_NUM_STRICT_ARB_SLOTS 0x15c064
2882 /* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause
2883 not suppoterd. */
2884 #define PBF_REG_P0_ARB_THRSH 0x1400e4
2885 /* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */
2886 #define PBF_REG_P0_CREDIT 0x140200
2887 /* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byte
2888 lines. */
2889 #define PBF_REG_P0_INIT_CRD 0x1400d0
2890 /* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
2891 * port 0. Reset upon init. */
2892 #define PBF_REG_P0_INTERNAL_CRD_FREED_CNT 0x140308
2893 /* [R 1] Removed for E3 B0 - Indication that pause is enabled for port 0. */
2894 #define PBF_REG_P0_PAUSE_ENABLE 0x140014
2895 /* [R 8] Removed for E3 B0 - Number of tasks in port 0 task queue. */
2896 #define PBF_REG_P0_TASK_CNT 0x140204
2897 /* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines
2898 * freed from the task queue of port 0. Reset upon init. */
2899 #define PBF_REG_P0_TQ_LINES_FREED_CNT 0x1402f0
2900 /* [R 12] Number of 8 bytes lines occupied in the task queue of port 0. */
2901 #define PBF_REG_P0_TQ_OCCUPANCY 0x1402fc
2902 /* [R 11] Removed for E3 B0 - Current credit for port 1 in the tx port
2903 * buffers in 16 byte lines. */
2904 #define PBF_REG_P1_CREDIT 0x140208
2905 /* [R 11] Removed for E3 B0 - Initial credit for port 0 in the tx port
2906 * buffers in 16 byte lines. */
2907 #define PBF_REG_P1_INIT_CRD 0x1400d4
2908 /* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
2909 * port 1. Reset upon init. */
2910 #define PBF_REG_P1_INTERNAL_CRD_FREED_CNT 0x14030c
2911 /* [R 8] Removed for E3 B0 - Number of tasks in port 1 task queue. */
2912 #define PBF_REG_P1_TASK_CNT 0x14020c
2913 /* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines
2914 * freed from the task queue of port 1. Reset upon init. */
2915 #define PBF_REG_P1_TQ_LINES_FREED_CNT 0x1402f4
2916 /* [R 12] Number of 8 bytes lines occupied in the task queue of port 1. */
2917 #define PBF_REG_P1_TQ_OCCUPANCY 0x140300
2918 /* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */
2919 #define PBF_REG_P4_CREDIT 0x140210
2920 /* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byte
2921 lines. */
2922 #define PBF_REG_P4_INIT_CRD 0x1400e0
2923 /* [R 32] Cyclic counter for the amount credits in 16 bytes lines added for
2924 * port 4. Reset upon init. */
2925 #define PBF_REG_P4_INTERNAL_CRD_FREED_CNT 0x140310
2926 /* [R 8] Removed for E3 B0 - Number of tasks in port 4 task queue. */
2927 #define PBF_REG_P4_TASK_CNT 0x140214
2928 /* [R 32] Removed for E3 B0 - Cyclic counter for number of 8 byte lines
2929 * freed from the task queue of port 4. Reset upon init. */
2930 #define PBF_REG_P4_TQ_LINES_FREED_CNT 0x1402f8
2931 /* [R 12] Number of 8 bytes lines occupied in the task queue of port 4. */
2932 #define PBF_REG_P4_TQ_OCCUPANCY 0x140304
2933 /* [RW 5] Interrupt mask register #0 read/write */
2934 #define PBF_REG_PBF_INT_MASK 0x1401d4
2935 /* [R 5] Interrupt register #0 read */
2936 #define PBF_REG_PBF_INT_STS 0x1401c8
2937 /* [RW 20] Parity mask register #0 read/write */
2938 #define PBF_REG_PBF_PRTY_MASK 0x1401e4
2939 /* [R 28] Parity register #0 read */
2940 #define PBF_REG_PBF_PRTY_STS 0x1401d8
2941 /* [RC 20] Parity register #0 read clear */
2942 #define PBF_REG_PBF_PRTY_STS_CLR 0x1401dc
2943 /* [RW 16] The Ethernet type value for L2 tag 0 */
2944 #define PBF_REG_TAG_ETHERTYPE_0 0x15c090
2945 /* [RW 4] The length of the info field for L2 tag 0. The length is between
2946 * 2B and 14B; in 2B granularity */
2947 #define PBF_REG_TAG_LEN_0 0x15c09c
2948 /* [R 32] Cyclic counter for number of 8 byte lines freed from the LB task
2949 * queue. Reset upon init. */
2950 #define PBF_REG_TQ_LINES_FREED_CNT_LB_Q 0x14038c
2951 /* [R 32] Cyclic counter for number of 8 byte lines freed from the task
2952 * queue 0. Reset upon init. */
2953 #define PBF_REG_TQ_LINES_FREED_CNT_Q0 0x140390
2954 /* [R 32] Cyclic counter for number of 8 byte lines freed from task queue 1.
2955 * Reset upon init. */
2956 #define PBF_REG_TQ_LINES_FREED_CNT_Q1 0x140394
2957 /* [R 13] Number of 8 bytes lines occupied in the task queue of the LB
2958 * queue. */
2959 #define PBF_REG_TQ_OCCUPANCY_LB_Q 0x1403a8
2960 /* [R 13] Number of 8 bytes lines occupied in the task queue of queue 0. */
2961 #define PBF_REG_TQ_OCCUPANCY_Q0 0x1403ac
2962 /* [R 13] Number of 8 bytes lines occupied in the task queue of queue 1. */
2963 #define PBF_REG_TQ_OCCUPANCY_Q1 0x1403b0
2964 /* [RW 16] One of 8 values that should be compared to type in Ethernet
2965 * parsing. If there is a match; the field after Ethernet is the first VLAN.
2966 * Reset value is 0x8100 which is the standard VLAN type. Note that when
2967 * checking second VLAN; type is compared only to 0x8100.
2968 */
2969 #define PBF_REG_VLAN_TYPE_0 0x15c06c
2970 /* [RW 2] Interrupt mask register #0 read/write */
2971 #define PB_REG_PB_INT_MASK 0x28
2972 /* [R 2] Interrupt register #0 read */
2973 #define PB_REG_PB_INT_STS 0x1c
2974 /* [RW 4] Parity mask register #0 read/write */
2975 #define PB_REG_PB_PRTY_MASK 0x38
2976 /* [R 4] Parity register #0 read */
2977 #define PB_REG_PB_PRTY_STS 0x2c
2978 /* [RC 4] Parity register #0 read clear */
2979 #define PB_REG_PB_PRTY_STS_CLR 0x30
2980 #define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
2981 #define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW (0x1<<8)
2982 #define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR (0x1<<1)
2983 #define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN (0x1<<6)
2984 #define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN (0x1<<7)
2985 #define PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN (0x1<<4)
2986 #define PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN (0x1<<3)
2987 #define PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN (0x1<<5)
2988 #define PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN (0x1<<2)
2989 /* [R 8] Config space A attention dirty bits. Each bit indicates that the
2990 * corresponding PF generates config space A attention. Set by PXP. Reset by
2991 * MCP writing 1 to icfg_space_a_request_clr. Note: register contains bits
2992 * from both paths. */
2993 #define PGLUE_B_REG_CFG_SPACE_A_REQUEST 0x9010
2994 /* [R 8] Config space B attention dirty bits. Each bit indicates that the
2995 * corresponding PF generates config space B attention. Set by PXP. Reset by
2996 * MCP writing 1 to icfg_space_b_request_clr. Note: register contains bits
2997 * from both paths. */
2998 #define PGLUE_B_REG_CFG_SPACE_B_REQUEST 0x9014
2999 /* [RW 1] Type A PF enable inbound interrupt table for CSDM. 0 - disable; 1
3000 * - enable. */
3001 #define PGLUE_B_REG_CSDM_INB_INT_A_PF_ENABLE 0x9194
3002 /* [RW 18] Type B VF inbound interrupt table for CSDM: bits[17:9]-mask;
3003 * its[8:0]-address. Bits [1:0] must be zero (DW resolution address). */
3004 #define PGLUE_B_REG_CSDM_INB_INT_B_VF 0x916c
3005 /* [RW 1] Type B VF enable inbound interrupt table for CSDM. 0 - disable; 1
3006 * - enable. */
3007 #define PGLUE_B_REG_CSDM_INB_INT_B_VF_ENABLE 0x919c
3008 /* [RW 16] Start offset of CSDM zone A (queue zone) in the internal RAM */
3009 #define PGLUE_B_REG_CSDM_START_OFFSET_A 0x9100
3010 /* [RW 16] Start offset of CSDM zone B (legacy zone) in the internal RAM */
3011 #define PGLUE_B_REG_CSDM_START_OFFSET_B 0x9108
3012 /* [RW 5] VF Shift of CSDM zone B (legacy zone) in the internal RAM */
3013 #define PGLUE_B_REG_CSDM_VF_SHIFT_B 0x9110
3014 /* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */
3015 #define PGLUE_B_REG_CSDM_ZONE_A_SIZE_PF 0x91ac
3016 /* [R 8] FLR request attention dirty bits for PFs 0 to 7. Each bit indicates
3017 * that the FLR register of the corresponding PF was set. Set by PXP. Reset
3018 * by MCP writing 1 to flr_request_pf_7_0_clr. Note: register contains bits
3019 * from both paths. */
3020 #define PGLUE_B_REG_FLR_REQUEST_PF_7_0 0x9028
3021 /* [W 8] FLR request attention dirty bits clear for PFs 0 to 7. MCP writes 1
3022 * to a bit in this register in order to clear the corresponding bit in
3023 * flr_request_pf_7_0 register. Note: register contains bits from both
3024 * paths. */
3025 #define PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR 0x9418
3026 /* [R 32] FLR request attention dirty bits for VFs 96 to 127. Each bit
3027 * indicates that the FLR register of the corresponding VF was set. Set by
3028 * PXP. Reset by MCP writing 1 to flr_request_vf_127_96_clr. */
3029 #define PGLUE_B_REG_FLR_REQUEST_VF_127_96 0x9024
3030 /* [R 32] FLR request attention dirty bits for VFs 0 to 31. Each bit
3031 * indicates that the FLR register of the corresponding VF was set. Set by
3032 * PXP. Reset by MCP writing 1 to flr_request_vf_31_0_clr. */
3033 #define PGLUE_B_REG_FLR_REQUEST_VF_31_0 0x9018
3034 /* [R 32] FLR request attention dirty bits for VFs 32 to 63. Each bit
3035 * indicates that the FLR register of the corresponding VF was set. Set by
3036 * PXP. Reset by MCP writing 1 to flr_request_vf_63_32_clr. */
3037 #define PGLUE_B_REG_FLR_REQUEST_VF_63_32 0x901c
3038 /* [R 32] FLR request attention dirty bits for VFs 64 to 95. Each bit
3039 * indicates that the FLR register of the corresponding VF was set. Set by
3040 * PXP. Reset by MCP writing 1 to flr_request_vf_95_64_clr. */
3041 #define PGLUE_B_REG_FLR_REQUEST_VF_95_64 0x9020
3042 /* [R 8] Each bit indicates an incorrect behavior in user RX interface. Bit
3043 * 0 - Target memory read arrived with a correctable error. Bit 1 - Target
3044 * memory read arrived with an uncorrectable error. Bit 2 - Configuration RW
3045 * arrived with a correctable error. Bit 3 - Configuration RW arrived with
3046 * an uncorrectable error. Bit 4 - Completion with Configuration Request
3047 * Retry Status. Bit 5 - Expansion ROM access received with a write request.
3048 * Bit 6 - Completion with pcie_rx_err of 0000; CMPL_STATUS of non-zero; and
3049 * pcie_rx_last not asserted. Bit 7 - Completion with pcie_rx_err of 1010;
3050 * and pcie_rx_last not asserted. */
3051 #define PGLUE_B_REG_INCORRECT_RCV_DETAILS 0x9068
3052 #define PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER 0x942c
3053 #define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ 0x9430
3054 #define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_WRITE 0x9434
3055 #define PGLUE_B_REG_INTERNAL_VFID_ENABLE 0x9438
3056 /* [W 7] Writing 1 to each bit in this register clears a corresponding error
3057 * details register and enables logging new error details. Bit 0 - clears
3058 * INCORRECT_RCV_DETAILS; Bit 1 - clears RX_ERR_DETAILS; Bit 2 - clears
3059 * TX_ERR_WR_ADD_31_0 TX_ERR_WR_ADD_63_32 TX_ERR_WR_DETAILS
3060 * TX_ERR_WR_DETAILS2 TX_ERR_RD_ADD_31_0 TX_ERR_RD_ADD_63_32
3061 * TX_ERR_RD_DETAILS TX_ERR_RD_DETAILS2 TX_ERR_WR_DETAILS_ICPL; Bit 3 -
3062 * clears VF_LENGTH_VIOLATION_DETAILS. Bit 4 - clears
3063 * VF_GRC_SPACE_VIOLATION_DETAILS. Bit 5 - clears RX_TCPL_ERR_DETAILS. Bit 6
3064 * - clears TCPL_IN_TWO_RCBS_DETAILS. */
3065 #define PGLUE_B_REG_LATCHED_ERRORS_CLR 0x943c
3066
3067 /* [R 9] Interrupt register #0 read */
3068 #define PGLUE_B_REG_PGLUE_B_INT_STS 0x9298
3069 /* [RC 9] Interrupt register #0 read clear */
3070 #define PGLUE_B_REG_PGLUE_B_INT_STS_CLR 0x929c
3071 /* [RW 2] Parity mask register #0 read/write */
3072 #define PGLUE_B_REG_PGLUE_B_PRTY_MASK 0x92b4
3073 /* [R 2] Parity register #0 read */
3074 #define PGLUE_B_REG_PGLUE_B_PRTY_STS 0x92a8
3075 /* [RC 2] Parity register #0 read clear */
3076 #define PGLUE_B_REG_PGLUE_B_PRTY_STS_CLR 0x92ac
3077 /* [R 13] Details of first request received with error. [2:0] - PFID. [3] -
3078 * VF_VALID. [9:4] - VFID. [11:10] - Error Code - 0 - Indicates Completion
3079 * Timeout of a User Tx non-posted request. 1 - unsupported request. 2 -
3080 * completer abort. 3 - Illegal value for this field. [12] valid - indicates
3081 * if there was a completion error since the last time this register was
3082 * cleared. */
3083 #define PGLUE_B_REG_RX_ERR_DETAILS 0x9080
3084 /* [R 18] Details of first ATS Translation Completion request received with
3085 * error. [2:0] - PFID. [3] - VF_VALID. [9:4] - VFID. [11:10] - Error Code -
3086 * 0 - Indicates Completion Timeout of a User Tx non-posted request. 1 -
3087 * unsupported request. 2 - completer abort. 3 - Illegal value for this
3088 * field. [16:12] - ATC OTB EntryID. [17] valid - indicates if there was a
3089 * completion error since the last time this register was cleared. */
3090 #define PGLUE_B_REG_RX_TCPL_ERR_DETAILS 0x9084
3091 /* [W 8] Debug only - Shadow BME bits clear for PFs 0 to 7. MCP writes 1 to
3092 * a bit in this register in order to clear the corresponding bit in
3093 * shadow_bme_pf_7_0 register. MCP should never use this unless a
3094 * work-around is needed. Note: register contains bits from both paths. */
3095 #define PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR 0x9458
3096 /* [R 8] SR IOV disabled attention dirty bits. Each bit indicates that the
3097 * VF enable register of the corresponding PF is written to 0 and was
3098 * previously 1. Set by PXP. Reset by MCP writing 1 to
3099 * sr_iov_disabled_request_clr. Note: register contains bits from both
3100 * paths. */
3101 #define PGLUE_B_REG_SR_IOV_DISABLED_REQUEST 0x9030
3102 /* [R 32] Indicates the status of tags 32-63. 0 - tags is used - read
3103 * completion did not return yet. 1 - tag is unused. Same functionality as
3104 * pxp2_registers_pgl_exp_rom_data2 for tags 0-31. */
3105 #define PGLUE_B_REG_TAGS_63_32 0x9244
3106 /* [RW 1] Type A PF enable inbound interrupt table for TSDM. 0 - disable; 1
3107 * - enable. */
3108 #define PGLUE_B_REG_TSDM_INB_INT_A_PF_ENABLE 0x9170
3109 /* [RW 16] Start offset of TSDM zone A (queue zone) in the internal RAM */
3110 #define PGLUE_B_REG_TSDM_START_OFFSET_A 0x90c4
3111 /* [RW 16] Start offset of TSDM zone B (legacy zone) in the internal RAM */
3112 #define PGLUE_B_REG_TSDM_START_OFFSET_B 0x90cc
3113 /* [RW 5] VF Shift of TSDM zone B (legacy zone) in the internal RAM */
3114 #define PGLUE_B_REG_TSDM_VF_SHIFT_B 0x90d4
3115 /* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */
3116 #define PGLUE_B_REG_TSDM_ZONE_A_SIZE_PF 0x91a0
3117 /* [R 32] Address [31:0] of first read request not submitted due to error */
3118 #define PGLUE_B_REG_TX_ERR_RD_ADD_31_0 0x9098
3119 /* [R 32] Address [63:32] of first read request not submitted due to error */
3120 #define PGLUE_B_REG_TX_ERR_RD_ADD_63_32 0x909c
3121 /* [R 31] Details of first read request not submitted due to error. [4:0]
3122 * VQID. [5] TREQ. 1 - Indicates the request is a Translation Request.
3123 * [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] -
3124 * VFID. */
3125 #define PGLUE_B_REG_TX_ERR_RD_DETAILS 0x90a0
3126 /* [R 26] Details of first read request not submitted due to error. [15:0]
3127 * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type -
3128 * [21] - Indicates was_error was set; [22] - Indicates BME was cleared;
3129 * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent
3130 * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid -
3131 * indicates if there was a request not submitted due to error since the
3132 * last time this register was cleared. */
3133 #define PGLUE_B_REG_TX_ERR_RD_DETAILS2 0x90a4
3134 /* [R 32] Address [31:0] of first write request not submitted due to error */
3135 #define PGLUE_B_REG_TX_ERR_WR_ADD_31_0 0x9088
3136 /* [R 32] Address [63:32] of first write request not submitted due to error */
3137 #define PGLUE_B_REG_TX_ERR_WR_ADD_63_32 0x908c
3138 /* [R 31] Details of first write request not submitted due to error. [4:0]
3139 * VQID. [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25]
3140 * - VFID. */
3141 #define PGLUE_B_REG_TX_ERR_WR_DETAILS 0x9090
3142 /* [R 26] Details of first write request not submitted due to error. [15:0]
3143 * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type -
3144 * [21] - Indicates was_error was set; [22] - Indicates BME was cleared;
3145 * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent
3146 * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid -
3147 * indicates if there was a request not submitted due to error since the
3148 * last time this register was cleared. */
3149 #define PGLUE_B_REG_TX_ERR_WR_DETAILS2 0x9094
3150 /* [RW 10] Type A PF/VF inbound interrupt table for USDM: bits[9:5]-mask;
3151 * its[4:0]-address relative to start_offset_a. Bits [1:0] can have any
3152 * value (Byte resolution address). */
3153 #define PGLUE_B_REG_USDM_INB_INT_A_0 0x9128
3154 #define PGLUE_B_REG_USDM_INB_INT_A_1 0x912c
3155 #define PGLUE_B_REG_USDM_INB_INT_A_2 0x9130
3156 #define PGLUE_B_REG_USDM_INB_INT_A_3 0x9134
3157 #define PGLUE_B_REG_USDM_INB_INT_A_4 0x9138
3158 #define PGLUE_B_REG_USDM_INB_INT_A_5 0x913c
3159 #define PGLUE_B_REG_USDM_INB_INT_A_6 0x9140
3160 /* [RW 1] Type A PF enable inbound interrupt table for USDM. 0 - disable; 1
3161 * - enable. */
3162 #define PGLUE_B_REG_USDM_INB_INT_A_PF_ENABLE 0x917c
3163 /* [RW 1] Type A VF enable inbound interrupt table for USDM. 0 - disable; 1
3164 * - enable. */
3165 #define PGLUE_B_REG_USDM_INB_INT_A_VF_ENABLE 0x9180
3166 /* [RW 1] Type B VF enable inbound interrupt table for USDM. 0 - disable; 1
3167 * - enable. */
3168 #define PGLUE_B_REG_USDM_INB_INT_B_VF_ENABLE 0x9184
3169 /* [RW 16] Start offset of USDM zone A (queue zone) in the internal RAM */
3170 #define PGLUE_B_REG_USDM_START_OFFSET_A 0x90d8
3171 /* [RW 16] Start offset of USDM zone B (legacy zone) in the internal RAM */
3172 #define PGLUE_B_REG_USDM_START_OFFSET_B 0x90e0
3173 /* [RW 5] VF Shift of USDM zone B (legacy zone) in the internal RAM */
3174 #define PGLUE_B_REG_USDM_VF_SHIFT_B 0x90e8
3175 /* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */
3176 #define PGLUE_B_REG_USDM_ZONE_A_SIZE_PF 0x91a4
3177 /* [R 26] Details of first target VF request accessing VF GRC space that
3178 * failed permission check. [14:0] Address. [15] w_nr: 0 - Read; 1 - Write.
3179 * [21:16] VFID. [24:22] - PFID. [25] valid - indicates if there was a
3180 * request accessing VF GRC space that failed permission check since the
3181 * last time this register was cleared. Permission checks are: function
3182 * permission; R/W permission; address range permission. */
3183 #define PGLUE_B_REG_VF_GRC_SPACE_VIOLATION_DETAILS 0x9234
3184 /* [R 31] Details of first target VF request with length violation (too many
3185 * DWs) accessing BAR0. [12:0] Address in DWs (bits [14:2] of byte address).
3186 * [14:13] BAR. [20:15] VFID. [23:21] - PFID. [29:24] - Length in DWs. [30]
3187 * valid - indicates if there was a request with length violation since the
3188 * last time this register was cleared. Length violations: length of more
3189 * than 2DWs; length of 2DWs and address not QW aligned; window is GRC and
3190 * length is more than 1 DW. */
3191 #define PGLUE_B_REG_VF_LENGTH_VIOLATION_DETAILS 0x9230
3192 /* [R 8] Was_error indication dirty bits for PFs 0 to 7. Each bit indicates
3193 * that there was a completion with uncorrectable error for the
3194 * corresponding PF. Set by PXP. Reset by MCP writing 1 to
3195 * was_error_pf_7_0_clr. */
3196 #define PGLUE_B_REG_WAS_ERROR_PF_7_0 0x907c
3197 /* [W 8] Was_error indication dirty bits clear for PFs 0 to 7. MCP writes 1
3198 * to a bit in this register in order to clear the corresponding bit in
3199 * flr_request_pf_7_0 register. */
3200 #define PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR 0x9470
3201 /* [R 32] Was_error indication dirty bits for VFs 96 to 127. Each bit
3202 * indicates that there was a completion with uncorrectable error for the
3203 * corresponding VF. Set by PXP. Reset by MCP writing 1 to
3204 * was_error_vf_127_96_clr. */
3205 #define PGLUE_B_REG_WAS_ERROR_VF_127_96 0x9078
3206 /* [W 32] Was_error indication dirty bits clear for VFs 96 to 127. MCP
3207 * writes 1 to a bit in this register in order to clear the corresponding
3208 * bit in was_error_vf_127_96 register. */
3209 #define PGLUE_B_REG_WAS_ERROR_VF_127_96_CLR 0x9474
3210 /* [R 32] Was_error indication dirty bits for VFs 0 to 31. Each bit
3211 * indicates that there was a completion with uncorrectable error for the
3212 * corresponding VF. Set by PXP. Reset by MCP writing 1 to
3213 * was_error_vf_31_0_clr. */
3214 #define PGLUE_B_REG_WAS_ERROR_VF_31_0 0x906c
3215 /* [W 32] Was_error indication dirty bits clear for VFs 0 to 31. MCP writes
3216 * 1 to a bit in this register in order to clear the corresponding bit in
3217 * was_error_vf_31_0 register. */
3218 #define PGLUE_B_REG_WAS_ERROR_VF_31_0_CLR 0x9478
3219 /* [R 32] Was_error indication dirty bits for VFs 32 to 63. Each bit
3220 * indicates that there was a completion with uncorrectable error for the
3221 * corresponding VF. Set by PXP. Reset by MCP writing 1 to
3222 * was_error_vf_63_32_clr. */
3223 #define PGLUE_B_REG_WAS_ERROR_VF_63_32 0x9070
3224 /* [W 32] Was_error indication dirty bits clear for VFs 32 to 63. MCP writes
3225 * 1 to a bit in this register in order to clear the corresponding bit in
3226 * was_error_vf_63_32 register. */
3227 #define PGLUE_B_REG_WAS_ERROR_VF_63_32_CLR 0x947c
3228 /* [R 32] Was_error indication dirty bits for VFs 64 to 95. Each bit
3229 * indicates that there was a completion with uncorrectable error for the
3230 * corresponding VF. Set by PXP. Reset by MCP writing 1 to
3231 * was_error_vf_95_64_clr. */
3232 #define PGLUE_B_REG_WAS_ERROR_VF_95_64 0x9074
3233 /* [W 32] Was_error indication dirty bits clear for VFs 64 to 95. MCP writes
3234 * 1 to a bit in this register in order to clear the corresponding bit in
3235 * was_error_vf_95_64 register. */
3236 #define PGLUE_B_REG_WAS_ERROR_VF_95_64_CLR 0x9480
3237 /* [RW 1] Type A PF enable inbound interrupt table for XSDM. 0 - disable; 1
3238 * - enable. */
3239 #define PGLUE_B_REG_XSDM_INB_INT_A_PF_ENABLE 0x9188
3240 /* [RW 16] Start offset of XSDM zone A (queue zone) in the internal RAM */
3241 #define PGLUE_B_REG_XSDM_START_OFFSET_A 0x90ec
3242 /* [RW 16] Start offset of XSDM zone B (legacy zone) in the internal RAM */
3243 #define PGLUE_B_REG_XSDM_START_OFFSET_B 0x90f4
3244 /* [RW 5] VF Shift of XSDM zone B (legacy zone) in the internal RAM */
3245 #define PGLUE_B_REG_XSDM_VF_SHIFT_B 0x90fc
3246 /* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */
3247 #define PGLUE_B_REG_XSDM_ZONE_A_SIZE_PF 0x91a8
3248 #define PRS_REG_A_PRSU_20 0x40134
3249 /* [R 8] debug only: CFC load request current credit. Transaction based. */
3250 #define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164
3251 /* [R 8] debug only: CFC search request current credit. Transaction based. */
3252 #define PRS_REG_CFC_SEARCH_CURRENT_CREDIT 0x40168
3253 /* [RW 6] The initial credit for the search message to the CFC interface.
3254 Credit is transaction based. */
3255 #define PRS_REG_CFC_SEARCH_INITIAL_CREDIT 0x4011c
3256 /* [RW 24] CID for port 0 if no match */
3257 #define PRS_REG_CID_PORT_0 0x400fc
3258 /* [RW 32] The CM header for flush message where 'load existed' bit in CFC
3259 load response is reset and packet type is 0. Used in packet start message
3260 to TCM. */
3261 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0 0x400dc
3262 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1 0x400e0
3263 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4
3264 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8
3265 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec
3266 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5 0x400f0
3267 /* [RW 32] The CM header for flush message where 'load existed' bit in CFC
3268 load response is set and packet type is 0. Used in packet start message
3269 to TCM. */
3270 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0 0x400bc
3271 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1 0x400c0
3272 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4
3273 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8
3274 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc
3275 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5 0x400d0
3276 /* [RW 32] The CM header for a match and packet type 1 for loopback port.
3277 Used in packet start message to TCM. */
3278 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c
3279 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_2 0x400a0
3280 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_3 0x400a4
3281 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_4 0x400a8
3282 /* [RW 32] The CM header for a match and packet type 0. Used in packet start
3283 message to TCM. */
3284 #define PRS_REG_CM_HDR_TYPE_0 0x40078
3285 #define PRS_REG_CM_HDR_TYPE_1 0x4007c
3286 #define PRS_REG_CM_HDR_TYPE_2 0x40080
3287 #define PRS_REG_CM_HDR_TYPE_3 0x40084
3288 #define PRS_REG_CM_HDR_TYPE_4 0x40088
3289 /* [RW 32] The CM header in case there was not a match on the connection */
3290 #define PRS_REG_CM_NO_MATCH_HDR 0x400b8
3291 /* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */
3292 #define PRS_REG_E1HOV_MODE 0x401c8
3293 /* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet
3294 start message to TCM. */
3295 #define PRS_REG_EVENT_ID_1 0x40054
3296 #define PRS_REG_EVENT_ID_2 0x40058
3297 #define PRS_REG_EVENT_ID_3 0x4005c
3298 /* [RW 16] The Ethernet type value for FCoE */
3299 #define PRS_REG_FCOE_TYPE 0x401d0
3300 /* [RW 8] Context region for flush packet with packet type 0. Used in CFC
3301 load request message. */
3302 #define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004
3303 #define PRS_REG_FLUSH_REGIONS_TYPE_1 0x40008
3304 #define PRS_REG_FLUSH_REGIONS_TYPE_2 0x4000c
3305 #define PRS_REG_FLUSH_REGIONS_TYPE_3 0x40010
3306 #define PRS_REG_FLUSH_REGIONS_TYPE_4 0x40014
3307 #define PRS_REG_FLUSH_REGIONS_TYPE_5 0x40018
3308 #define PRS_REG_FLUSH_REGIONS_TYPE_6 0x4001c
3309 #define PRS_REG_FLUSH_REGIONS_TYPE_7 0x40020
3310 /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
3311 * Ethernet header. */
3312 #define PRS_REG_HDRS_AFTER_BASIC 0x40238
3313 /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
3314 * Ethernet header for port 0 packets. */
3315 #define PRS_REG_HDRS_AFTER_BASIC_PORT_0 0x40270
3316 #define PRS_REG_HDRS_AFTER_BASIC_PORT_1 0x40290
3317 /* [R 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 */
3318 #define PRS_REG_HDRS_AFTER_TAG_0 0x40248
3319 /* [RW 6] Bit-map indicating which L2 hdrs may appear after L2 tag 0 for
3320 * port 0 packets */
3321 #define PRS_REG_HDRS_AFTER_TAG_0_PORT_0 0x40280
3322 #define PRS_REG_HDRS_AFTER_TAG_0_PORT_1 0x402a0
3323 /* [RW 4] The increment value to send in the CFC load request message */
3324 #define PRS_REG_INC_VALUE 0x40048
3325 /* [RW 6] Bit-map indicating which headers must appear in the packet */
3326 #define PRS_REG_MUST_HAVE_HDRS 0x40254
3327 /* [RW 6] Bit-map indicating which headers must appear in the packet for
3328 * port 0 packets */
3329 #define PRS_REG_MUST_HAVE_HDRS_PORT_0 0x4028c
3330 #define PRS_REG_MUST_HAVE_HDRS_PORT_1 0x402ac
3331 #define PRS_REG_NIC_MODE 0x40138
3332 /* [RW 8] The 8-bit event ID for cases where there is no match on the
3333 connection. Used in packet start message to TCM. */
3334 #define PRS_REG_NO_MATCH_EVENT_ID 0x40070
3335 /* [ST 24] The number of input CFC flush packets */
3336 #define PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES 0x40128
3337 /* [ST 32] The number of cycles the Parser halted its operation since it
3338 could not allocate the next serial number */
3339 #define PRS_REG_NUM_OF_DEAD_CYCLES 0x40130
3340 /* [ST 24] The number of input packets */
3341 #define PRS_REG_NUM_OF_PACKETS 0x40124
3342 /* [ST 24] The number of input transparent flush packets */
3343 #define PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES 0x4012c
3344 /* [RW 8] Context region for received Ethernet packet with a match and
3345 packet type 0. Used in CFC load request message */
3346 #define PRS_REG_PACKET_REGIONS_TYPE_0 0x40028
3347 #define PRS_REG_PACKET_REGIONS_TYPE_1 0x4002c
3348 #define PRS_REG_PACKET_REGIONS_TYPE_2 0x40030
3349 #define PRS_REG_PACKET_REGIONS_TYPE_3 0x40034
3350 #define PRS_REG_PACKET_REGIONS_TYPE_4 0x40038
3351 #define PRS_REG_PACKET_REGIONS_TYPE_5 0x4003c
3352 #define PRS_REG_PACKET_REGIONS_TYPE_6 0x40040
3353 #define PRS_REG_PACKET_REGIONS_TYPE_7 0x40044
3354 /* [R 2] debug only: Number of pending requests for CAC on port 0. */
3355 #define PRS_REG_PENDING_BRB_CAC0_RQ 0x40174
3356 /* [R 2] debug only: Number of pending requests for header parsing. */
3357 #define PRS_REG_PENDING_BRB_PRS_RQ 0x40170
3358 /* [R 1] Interrupt register #0 read */
3359 #define PRS_REG_PRS_INT_STS 0x40188
3360 /* [RW 8] Parity mask register #0 read/write */
3361 #define PRS_REG_PRS_PRTY_MASK 0x401a4
3362 /* [R 8] Parity register #0 read */
3363 #define PRS_REG_PRS_PRTY_STS 0x40198
3364 /* [RC 8] Parity register #0 read clear */
3365 #define PRS_REG_PRS_PRTY_STS_CLR 0x4019c
3366 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load
3367 request message */
3368 #define PRS_REG_PURE_REGIONS 0x40024
3369 /* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this
3370 serail number was released by SDM but cannot be used because a previous
3371 serial number was not released. */
3372 #define PRS_REG_SERIAL_NUM_STATUS_LSB 0x40154
3373 /* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this
3374 serail number was released by SDM but cannot be used because a previous
3375 serial number was not released. */
3376 #define PRS_REG_SERIAL_NUM_STATUS_MSB 0x40158
3377 /* [R 4] debug only: SRC current credit. Transaction based. */
3378 #define PRS_REG_SRC_CURRENT_CREDIT 0x4016c
3379 /* [RW 16] The Ethernet type value for L2 tag 0 */
3380 #define PRS_REG_TAG_ETHERTYPE_0 0x401d4
3381 /* [RW 4] The length of the info field for L2 tag 0. The length is between
3382 * 2B and 14B; in 2B granularity */
3383 #define PRS_REG_TAG_LEN_0 0x4022c
3384 /* [R 8] debug only: TCM current credit. Cycle based. */
3385 #define PRS_REG_TCM_CURRENT_CREDIT 0x40160
3386 /* [R 8] debug only: TSDM current credit. Transaction based. */
3387 #define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c
3388 /* [RW 16] One of 8 values that should be compared to type in Ethernet
3389 * parsing. If there is a match; the field after Ethernet is the first VLAN.
3390 * Reset value is 0x8100 which is the standard VLAN type. Note that when
3391 * checking second VLAN; type is compared only to 0x8100.
3392 */
3393 #define PRS_REG_VLAN_TYPE_0 0x401a8
3394 #define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT (0x1<<19)
3395 #define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF (0x1<<20)
3396 #define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN (0x1<<22)
3397 #define PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED (0x1<<23)
3398 #define PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED (0x1<<24)
3399 #define PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR (0x1<<7)
3400 #define PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR (0x1<<7)
3401 /* [R 6] Debug only: Number of used entries in the data FIFO */
3402 #define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c
3403 /* [R 7] Debug only: Number of used entries in the header FIFO */
3404 #define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478
3405 #define PXP2_REG_PGL_ADDR_88_F0 0x120534
3406 /* [R 32] GRC address for configuration access to PCIE config address 0x88.
3407 * any write to this PCIE address will cause a GRC write access to the
3408 * address that's in t this register */
3409 #define PXP2_REG_PGL_ADDR_88_F1 0x120544
3410 #define PXP2_REG_PGL_ADDR_8C_F0 0x120538
3411 /* [R 32] GRC address for configuration access to PCIE config address 0x8c.
3412 * any write to this PCIE address will cause a GRC write access to the
3413 * address that's in t this register */
3414 #define PXP2_REG_PGL_ADDR_8C_F1 0x120548
3415 #define PXP2_REG_PGL_ADDR_90_F0 0x12053c
3416 /* [R 32] GRC address for configuration access to PCIE config address 0x90.
3417 * any write to this PCIE address will cause a GRC write access to the
3418 * address that's in t this register */
3419 #define PXP2_REG_PGL_ADDR_90_F1 0x12054c
3420 #define PXP2_REG_PGL_ADDR_94_F0 0x120540
3421 /* [R 32] GRC address for configuration access to PCIE config address 0x94.
3422 * any write to this PCIE address will cause a GRC write access to the
3423 * address that's in t this register */
3424 #define PXP2_REG_PGL_ADDR_94_F1 0x120550
3425 #define PXP2_REG_PGL_CONTROL0 0x120490
3426 #define PXP2_REG_PGL_CONTROL1 0x120514
3427 #define PXP2_REG_PGL_DEBUG 0x120520
3428 /* [RW 32] third dword data of expansion rom request. this register is
3429 special. reading from it provides a vector outstanding read requests. if
3430 a bit is zero it means that a read request on the corresponding tag did
3431 not finish yet (not all completions have arrived for it) */
3432 #define PXP2_REG_PGL_EXP_ROM2 0x120808
3433 /* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask;
3434 its[15:0]-address */
3435 #define PXP2_REG_PGL_INT_CSDM_0 0x1204f4
3436 #define PXP2_REG_PGL_INT_CSDM_1 0x1204f8
3437 #define PXP2_REG_PGL_INT_CSDM_2 0x1204fc
3438 #define PXP2_REG_PGL_INT_CSDM_3 0x120500
3439 #define PXP2_REG_PGL_INT_CSDM_4 0x120504
3440 #define PXP2_REG_PGL_INT_CSDM_5 0x120508
3441 #define PXP2_REG_PGL_INT_CSDM_6 0x12050c
3442 #define PXP2_REG_PGL_INT_CSDM_7 0x120510
3443 /* [RW 32] Inbound interrupt table for TSDM: bits[31:16]-mask;
3444 its[15:0]-address */
3445 #define PXP2_REG_PGL_INT_TSDM_0 0x120494
3446 #define PXP2_REG_PGL_INT_TSDM_1 0x120498
3447 #define PXP2_REG_PGL_INT_TSDM_2 0x12049c
3448 #define PXP2_REG_PGL_INT_TSDM_3 0x1204a0
3449 #define PXP2_REG_PGL_INT_TSDM_4 0x1204a4
3450 #define PXP2_REG_PGL_INT_TSDM_5 0x1204a8
3451 #define PXP2_REG_PGL_INT_TSDM_6 0x1204ac
3452 #define PXP2_REG_PGL_INT_TSDM_7 0x1204b0
3453 /* [RW 32] Inbound interrupt table for USDM: bits[31:16]-mask;
3454 its[15:0]-address */
3455 #define PXP2_REG_PGL_INT_USDM_0 0x1204b4
3456 #define PXP2_REG_PGL_INT_USDM_1 0x1204b8
3457 #define PXP2_REG_PGL_INT_USDM_2 0x1204bc
3458 #define PXP2_REG_PGL_INT_USDM_3 0x1204c0
3459 #define PXP2_REG_PGL_INT_USDM_4 0x1204c4
3460 #define PXP2_REG_PGL_INT_USDM_5 0x1204c8
3461 #define PXP2_REG_PGL_INT_USDM_6 0x1204cc
3462 #define PXP2_REG_PGL_INT_USDM_7 0x1204d0
3463 /* [RW 32] Inbound interrupt table for XSDM: bits[31:16]-mask;
3464 its[15:0]-address */
3465 #define PXP2_REG_PGL_INT_XSDM_0 0x1204d4
3466 #define PXP2_REG_PGL_INT_XSDM_1 0x1204d8
3467 #define PXP2_REG_PGL_INT_XSDM_2 0x1204dc
3468 #define PXP2_REG_PGL_INT_XSDM_3 0x1204e0
3469 #define PXP2_REG_PGL_INT_XSDM_4 0x1204e4
3470 #define PXP2_REG_PGL_INT_XSDM_5 0x1204e8
3471 #define PXP2_REG_PGL_INT_XSDM_6 0x1204ec
3472 #define PXP2_REG_PGL_INT_XSDM_7 0x1204f0
3473 /* [RW 3] this field allows one function to pretend being another function
3474 when accessing any BAR mapped resource within the device. the value of
3475 the field is the number of the function that will be accessed
3476 effectively. after software write to this bit it must read it in order to
3477 know that the new value is updated */
3478 #define PXP2_REG_PGL_PRETEND_FUNC_F0 0x120674
3479 #define PXP2_REG_PGL_PRETEND_FUNC_F1 0x120678
3480 #define PXP2_REG_PGL_PRETEND_FUNC_F2 0x12067c
3481 #define PXP2_REG_PGL_PRETEND_FUNC_F3 0x120680
3482 #define PXP2_REG_PGL_PRETEND_FUNC_F4 0x120684
3483 #define PXP2_REG_PGL_PRETEND_FUNC_F5 0x120688
3484 #define PXP2_REG_PGL_PRETEND_FUNC_F6 0x12068c
3485 #define PXP2_REG_PGL_PRETEND_FUNC_F7 0x120690
3486 /* [R 1] this bit indicates that a read request was blocked because of
3487 bus_master_en was deasserted */
3488 #define PXP2_REG_PGL_READ_BLOCKED 0x120568
3489 #define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8
3490 /* [R 18] debug only */
3491 #define PXP2_REG_PGL_TXW_CDTS 0x12052c
3492 /* [R 1] this bit indicates that a write request was blocked because of
3493 bus_master_en was deasserted */
3494 #define PXP2_REG_PGL_WRITE_BLOCKED 0x120564
3495 #define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0
3496 #define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
3497 #define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
3498 #define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4
3499 #define PXP2_REG_PSWRQ_BW_ADD28 0x120228
3500 #define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8
3501 #define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4
3502 #define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8
3503 #define PXP2_REG_PSWRQ_BW_ADD8 0x1201dc
3504 #define PXP2_REG_PSWRQ_BW_ADD9 0x1201e0
3505 #define PXP2_REG_PSWRQ_BW_CREDIT 0x12032c
3506 #define PXP2_REG_PSWRQ_BW_L1 0x1202b0
3507 #define PXP2_REG_PSWRQ_BW_L10 0x1202d4
3508 #define PXP2_REG_PSWRQ_BW_L11 0x1202d8
3509 #define PXP2_REG_PSWRQ_BW_L2 0x1202b4
3510 #define PXP2_REG_PSWRQ_BW_L28 0x120318
3511 #define PXP2_REG_PSWRQ_BW_L3 0x1202b8
3512 #define PXP2_REG_PSWRQ_BW_L6 0x1202c4
3513 #define PXP2_REG_PSWRQ_BW_L7 0x1202c8
3514 #define PXP2_REG_PSWRQ_BW_L8 0x1202cc
3515 #define PXP2_REG_PSWRQ_BW_L9 0x1202d0
3516 #define PXP2_REG_PSWRQ_BW_RD 0x120324
3517 #define PXP2_REG_PSWRQ_BW_UB1 0x120238
3518 #define PXP2_REG_PSWRQ_BW_UB10 0x12025c
3519 #define PXP2_REG_PSWRQ_BW_UB11 0x120260
3520 #define PXP2_REG_PSWRQ_BW_UB2 0x12023c
3521 #define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
3522 #define PXP2_REG_PSWRQ_BW_UB3 0x120240
3523 #define PXP2_REG_PSWRQ_BW_UB6 0x12024c
3524 #define PXP2_REG_PSWRQ_BW_UB7 0x120250
3525 #define PXP2_REG_PSWRQ_BW_UB8 0x120254
3526 #define PXP2_REG_PSWRQ_BW_UB9 0x120258
3527 #define PXP2_REG_PSWRQ_BW_WR 0x120328
3528 #define PXP2_REG_PSWRQ_CDU0_L2P 0x120000
3529 #define PXP2_REG_PSWRQ_QM0_L2P 0x120038
3530 #define PXP2_REG_PSWRQ_SRC0_L2P 0x120054
3531 #define PXP2_REG_PSWRQ_TM0_L2P 0x12001c
3532 #define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0
3533 /* [RW 32] Interrupt mask register #0 read/write */
3534 #define PXP2_REG_PXP2_INT_MASK_0 0x120578
3535 /* [R 32] Interrupt register #0 read */
3536 #define PXP2_REG_PXP2_INT_STS_0 0x12056c
3537 #define PXP2_REG_PXP2_INT_STS_1 0x120608
3538 /* [RC 32] Interrupt register #0 read clear */
3539 #define PXP2_REG_PXP2_INT_STS_CLR_0 0x120570
3540 /* [RW 32] Parity mask register #0 read/write */
3541 #define PXP2_REG_PXP2_PRTY_MASK_0 0x120588
3542 #define PXP2_REG_PXP2_PRTY_MASK_1 0x120598
3543 /* [R 32] Parity register #0 read */
3544 #define PXP2_REG_PXP2_PRTY_STS_0 0x12057c
3545 #define PXP2_REG_PXP2_PRTY_STS_1 0x12058c
3546 /* [RC 32] Parity register #0 read clear */
3547 #define PXP2_REG_PXP2_PRTY_STS_CLR_0 0x120580
3548 #define PXP2_REG_PXP2_PRTY_STS_CLR_1 0x120590
3549 /* [R 1] Debug only: The 'almost full' indication from each fifo (gives
3550 indication about backpressure) */
3551 #define PXP2_REG_RD_ALMOST_FULL_0 0x120424
3552 /* [R 8] Debug only: The blocks counter - number of unused block ids */
3553 #define PXP2_REG_RD_BLK_CNT 0x120418
3554 /* [RW 8] Debug only: Total number of available blocks in Tetris Buffer.
3555 Must be bigger than 6. Normally should not be changed. */
3556 #define PXP2_REG_RD_BLK_NUM_CFG 0x12040c
3557 /* [RW 2] CDU byte swapping mode configuration for master read requests */
3558 #define PXP2_REG_RD_CDURD_SWAP_MODE 0x120404
3559 /* [RW 1] When '1'; inputs to the PSWRD block are ignored */
3560 #define PXP2_REG_RD_DISABLE_INPUTS 0x120374
3561 /* [R 1] PSWRD internal memories initialization is done */
3562 #define PXP2_REG_RD_INIT_DONE 0x120370
3563 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
3564 allocated for vq10 */
3565 #define PXP2_REG_RD_MAX_BLKS_VQ10 0x1203a0
3566 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
3567 allocated for vq11 */
3568 #define PXP2_REG_RD_MAX_BLKS_VQ11 0x1203a4
3569 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
3570 allocated for vq17 */
3571 #define PXP2_REG_RD_MAX_BLKS_VQ17 0x1203bc
3572 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
3573 allocated for vq18 */
3574 #define PXP2_REG_RD_MAX_BLKS_VQ18 0x1203c0
3575 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
3576 allocated for vq19 */
3577 #define PXP2_REG_RD_MAX_BLKS_VQ19 0x1203c4
3578 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
3579 allocated for vq22 */
3580 #define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0
3581 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
3582 allocated for vq25 */
3583 #define PXP2_REG_RD_MAX_BLKS_VQ25 0x1203dc
3584 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
3585 allocated for vq6 */
3586 #define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390
3587 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
3588 allocated for vq9 */
3589 #define PXP2_REG_RD_MAX_BLKS_VQ9 0x12039c
3590 /* [RW 2] PBF byte swapping mode configuration for master read requests */
3591 #define PXP2_REG_RD_PBF_SWAP_MODE 0x1203f4
3592 /* [R 1] Debug only: Indication if delivery ports are idle */
3593 #define PXP2_REG_RD_PORT_IS_IDLE_0 0x12041c
3594 #define PXP2_REG_RD_PORT_IS_IDLE_1 0x120420
3595 /* [RW 2] QM byte swapping mode configuration for master read requests */
3596 #define PXP2_REG_RD_QM_SWAP_MODE 0x1203f8
3597 /* [R 7] Debug only: The SR counter - number of unused sub request ids */
3598 #define PXP2_REG_RD_SR_CNT 0x120414
3599 /* [RW 2] SRC byte swapping mode configuration for master read requests */
3600 #define PXP2_REG_RD_SRC_SWAP_MODE 0x120400
3601 /* [RW 7] Debug only: Total number of available PCI read sub-requests. Must
3602 be bigger than 1. Normally should not be changed. */
3603 #define PXP2_REG_RD_SR_NUM_CFG 0x120408
3604 /* [RW 1] Signals the PSWRD block to start initializing internal memories */
3605 #define PXP2_REG_RD_START_INIT 0x12036c
3606 /* [RW 2] TM byte swapping mode configuration for master read requests */
3607 #define PXP2_REG_RD_TM_SWAP_MODE 0x1203fc
3608 /* [RW 10] Bandwidth addition to VQ0 write requests */
3609 #define PXP2_REG_RQ_BW_RD_ADD0 0x1201bc
3610 /* [RW 10] Bandwidth addition to VQ12 read requests */
3611 #define PXP2_REG_RQ_BW_RD_ADD12 0x1201ec
3612 /* [RW 10] Bandwidth addition to VQ13 read requests */
3613 #define PXP2_REG_RQ_BW_RD_ADD13 0x1201f0
3614 /* [RW 10] Bandwidth addition to VQ14 read requests */
3615 #define PXP2_REG_RQ_BW_RD_ADD14 0x1201f4
3616 /* [RW 10] Bandwidth addition to VQ15 read requests */
3617 #define PXP2_REG_RQ_BW_RD_ADD15 0x1201f8
3618 /* [RW 10] Bandwidth addition to VQ16 read requests */
3619 #define PXP2_REG_RQ_BW_RD_ADD16 0x1201fc
3620 /* [RW 10] Bandwidth addition to VQ17 read requests */
3621 #define PXP2_REG_RQ_BW_RD_ADD17 0x120200
3622 /* [RW 10] Bandwidth addition to VQ18 read requests */
3623 #define PXP2_REG_RQ_BW_RD_ADD18 0x120204
3624 /* [RW 10] Bandwidth addition to VQ19 read requests */
3625 #define PXP2_REG_RQ_BW_RD_ADD19 0x120208
3626 /* [RW 10] Bandwidth addition to VQ20 read requests */
3627 #define PXP2_REG_RQ_BW_RD_ADD20 0x12020c
3628 /* [RW 10] Bandwidth addition to VQ22 read requests */
3629 #define PXP2_REG_RQ_BW_RD_ADD22 0x120210
3630 /* [RW 10] Bandwidth addition to VQ23 read requests */
3631 #define PXP2_REG_RQ_BW_RD_ADD23 0x120214
3632 /* [RW 10] Bandwidth addition to VQ24 read requests */
3633 #define PXP2_REG_RQ_BW_RD_ADD24 0x120218
3634 /* [RW 10] Bandwidth addition to VQ25 read requests */
3635 #define PXP2_REG_RQ_BW_RD_ADD25 0x12021c
3636 /* [RW 10] Bandwidth addition to VQ26 read requests */
3637 #define PXP2_REG_RQ_BW_RD_ADD26 0x120220
3638 /* [RW 10] Bandwidth addition to VQ27 read requests */
3639 #define PXP2_REG_RQ_BW_RD_ADD27 0x120224
3640 /* [RW 10] Bandwidth addition to VQ4 read requests */
3641 #define PXP2_REG_RQ_BW_RD_ADD4 0x1201cc
3642 /* [RW 10] Bandwidth addition to VQ5 read requests */
3643 #define PXP2_REG_RQ_BW_RD_ADD5 0x1201d0
3644 /* [RW 10] Bandwidth Typical L for VQ0 Read requests */
3645 #define PXP2_REG_RQ_BW_RD_L0 0x1202ac
3646 /* [RW 10] Bandwidth Typical L for VQ12 Read requests */
3647 #define PXP2_REG_RQ_BW_RD_L12 0x1202dc
3648 /* [RW 10] Bandwidth Typical L for VQ13 Read requests */
3649 #define PXP2_REG_RQ_BW_RD_L13 0x1202e0
3650 /* [RW 10] Bandwidth Typical L for VQ14 Read requests */
3651 #define PXP2_REG_RQ_BW_RD_L14 0x1202e4
3652 /* [RW 10] Bandwidth Typical L for VQ15 Read requests */
3653 #define PXP2_REG_RQ_BW_RD_L15 0x1202e8
3654 /* [RW 10] Bandwidth Typical L for VQ16 Read requests */
3655 #define PXP2_REG_RQ_BW_RD_L16 0x1202ec
3656 /* [RW 10] Bandwidth Typical L for VQ17 Read requests */
3657 #define PXP2_REG_RQ_BW_RD_L17 0x1202f0
3658 /* [RW 10] Bandwidth Typical L for VQ18 Read requests */
3659 #define PXP2_REG_RQ_BW_RD_L18 0x1202f4
3660 /* [RW 10] Bandwidth Typical L for VQ19 Read requests */
3661 #define PXP2_REG_RQ_BW_RD_L19 0x1202f8
3662 /* [RW 10] Bandwidth Typical L for VQ20 Read requests */
3663 #define PXP2_REG_RQ_BW_RD_L20 0x1202fc
3664 /* [RW 10] Bandwidth Typical L for VQ22 Read requests */
3665 #define PXP2_REG_RQ_BW_RD_L22 0x120300
3666 /* [RW 10] Bandwidth Typical L for VQ23 Read requests */
3667 #define PXP2_REG_RQ_BW_RD_L23 0x120304
3668 /* [RW 10] Bandwidth Typical L for VQ24 Read requests */
3669 #define PXP2_REG_RQ_BW_RD_L24 0x120308
3670 /* [RW 10] Bandwidth Typical L for VQ25 Read requests */
3671 #define PXP2_REG_RQ_BW_RD_L25 0x12030c
3672 /* [RW 10] Bandwidth Typical L for VQ26 Read requests */
3673 #define PXP2_REG_RQ_BW_RD_L26 0x120310
3674 /* [RW 10] Bandwidth Typical L for VQ27 Read requests */
3675 #define PXP2_REG_RQ_BW_RD_L27 0x120314
3676 /* [RW 10] Bandwidth Typical L for VQ4 Read requests */
3677 #define PXP2_REG_RQ_BW_RD_L4 0x1202bc
3678 /* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */
3679 #define PXP2_REG_RQ_BW_RD_L5 0x1202c0
3680 /* [RW 7] Bandwidth upper bound for VQ0 read requests */
3681 #define PXP2_REG_RQ_BW_RD_UBOUND0 0x120234
3682 /* [RW 7] Bandwidth upper bound for VQ12 read requests */
3683 #define PXP2_REG_RQ_BW_RD_UBOUND12 0x120264
3684 /* [RW 7] Bandwidth upper bound for VQ13 read requests */
3685 #define PXP2_REG_RQ_BW_RD_UBOUND13 0x120268
3686 /* [RW 7] Bandwidth upper bound for VQ14 read requests */
3687 #define PXP2_REG_RQ_BW_RD_UBOUND14 0x12026c
3688 /* [RW 7] Bandwidth upper bound for VQ15 read requests */
3689 #define PXP2_REG_RQ_BW_RD_UBOUND15 0x120270
3690 /* [RW 7] Bandwidth upper bound for VQ16 read requests */
3691 #define PXP2_REG_RQ_BW_RD_UBOUND16 0x120274
3692 /* [RW 7] Bandwidth upper bound for VQ17 read requests */
3693 #define PXP2_REG_RQ_BW_RD_UBOUND17 0x120278
3694 /* [RW 7] Bandwidth upper bound for VQ18 read requests */
3695 #define PXP2_REG_RQ_BW_RD_UBOUND18 0x12027c
3696 /* [RW 7] Bandwidth upper bound for VQ19 read requests */
3697 #define PXP2_REG_RQ_BW_RD_UBOUND19 0x120280
3698 /* [RW 7] Bandwidth upper bound for VQ20 read requests */
3699 #define PXP2_REG_RQ_BW_RD_UBOUND20 0x120284
3700 /* [RW 7] Bandwidth upper bound for VQ22 read requests */
3701 #define PXP2_REG_RQ_BW_RD_UBOUND22 0x120288
3702 /* [RW 7] Bandwidth upper bound for VQ23 read requests */
3703 #define PXP2_REG_RQ_BW_RD_UBOUND23 0x12028c
3704 /* [RW 7] Bandwidth upper bound for VQ24 read requests */
3705 #define PXP2_REG_RQ_BW_RD_UBOUND24 0x120290
3706 /* [RW 7] Bandwidth upper bound for VQ25 read requests */
3707 #define PXP2_REG_RQ_BW_RD_UBOUND25 0x120294
3708 /* [RW 7] Bandwidth upper bound for VQ26 read requests */
3709 #define PXP2_REG_RQ_BW_RD_UBOUND26 0x120298
3710 /* [RW 7] Bandwidth upper bound for VQ27 read requests */
3711 #define PXP2_REG_RQ_BW_RD_UBOUND27 0x12029c
3712 /* [RW 7] Bandwidth upper bound for VQ4 read requests */
3713 #define PXP2_REG_RQ_BW_RD_UBOUND4 0x120244
3714 /* [RW 7] Bandwidth upper bound for VQ5 read requests */
3715 #define PXP2_REG_RQ_BW_RD_UBOUND5 0x120248
3716 /* [RW 10] Bandwidth addition to VQ29 write requests */
3717 #define PXP2_REG_RQ_BW_WR_ADD29 0x12022c
3718 /* [RW 10] Bandwidth addition to VQ30 write requests */
3719 #define PXP2_REG_RQ_BW_WR_ADD30 0x120230
3720 /* [RW 10] Bandwidth Typical L for VQ29 Write requests */
3721 #define PXP2_REG_RQ_BW_WR_L29 0x12031c
3722 /* [RW 10] Bandwidth Typical L for VQ30 Write requests */
3723 #define PXP2_REG_RQ_BW_WR_L30 0x120320
3724 /* [RW 7] Bandwidth upper bound for VQ29 */
3725 #define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4
3726 /* [RW 7] Bandwidth upper bound for VQ30 */
3727 #define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8
3728 /* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */
3729 #define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008
3730 /* [RW 2] Endian mode for cdu */
3731 #define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0
3732 #define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c
3733 #define PXP2_REG_RQ_CDU_LAST_ILT 0x120620
3734 /* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k;
3735 -128k */
3736 #define PXP2_REG_RQ_CDU_P_SIZE 0x120018
3737 /* [R 1] 1' indicates that the requester has finished its internal
3738 configuration */
3739 #define PXP2_REG_RQ_CFG_DONE 0x1201b4
3740 /* [RW 2] Endian mode for debug */
3741 #define PXP2_REG_RQ_DBG_ENDIAN_M 0x1201a4
3742 /* [RW 1] When '1'; requests will enter input buffers but wont get out
3743 towards the glue */
3744 #define PXP2_REG_RQ_DISABLE_INPUTS 0x120330
3745 /* [RW 4] Determines alignment of write SRs when a request is split into
3746 * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B
3747 * aligned. 4 - 512B aligned. */
3748 #define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0
3749 /* [RW 4] Determines alignment of read SRs when a request is split into
3750 * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B
3751 * aligned. 4 - 512B aligned. */
3752 #define PXP2_REG_RQ_DRAM_ALIGN_RD 0x12092c
3753 /* [RW 1] when set the new alignment method (E2) will be applied; when reset
3754 * the original alignment method (E1 E1H) will be applied */
3755 #define PXP2_REG_RQ_DRAM_ALIGN_SEL 0x120930
3756 /* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will
3757 be asserted */
3758 #define PXP2_REG_RQ_ELT_DISABLE 0x12066c
3759 /* [RW 2] Endian mode for hc */
3760 #define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8
3761 /* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for back
3762 compatibility needs; Note that different registers are used per mode */
3763 #define PXP2_REG_RQ_ILT_MODE 0x1205b4
3764 /* [WB 53] Onchip address table */
3765 #define PXP2_REG_RQ_ONCHIP_AT 0x122000
3766 /* [WB 53] Onchip address table - B0 */
3767 #define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000
3768 /* [RW 13] Pending read limiter threshold; in Dwords */
3769 #define PXP2_REG_RQ_PDR_LIMIT 0x12033c
3770 /* [RW 2] Endian mode for qm */
3771 #define PXP2_REG_RQ_QM_ENDIAN_M 0x120194
3772 #define PXP2_REG_RQ_QM_FIRST_ILT 0x120634
3773 #define PXP2_REG_RQ_QM_LAST_ILT 0x120638
3774 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
3775 -128k */
3776 #define PXP2_REG_RQ_QM_P_SIZE 0x120050
3777 /* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
3778 #define PXP2_REG_RQ_RBC_DONE 0x1201b0
3779 /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
3780 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
3781 #define PXP2_REG_RQ_RD_MBS0 0x120160
3782 /* [RW 3] Max burst size filed for read requests port 1; 000 - 128B;
3783 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
3784 #define PXP2_REG_RQ_RD_MBS1 0x120168
3785 /* [RW 2] Endian mode for src */
3786 #define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c
3787 #define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c
3788 #define PXP2_REG_RQ_SRC_LAST_ILT 0x120640
3789 /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
3790 -128k */
3791 #define PXP2_REG_RQ_SRC_P_SIZE 0x12006c
3792 /* [RW 2] Endian mode for tm */
3793 #define PXP2_REG_RQ_TM_ENDIAN_M 0x120198
3794 #define PXP2_REG_RQ_TM_FIRST_ILT 0x120644
3795 #define PXP2_REG_RQ_TM_LAST_ILT 0x120648
3796 /* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k;
3797 -128k */
3798 #define PXP2_REG_RQ_TM_P_SIZE 0x120034
3799 /* [R 5] Number of entries in the ufifo; his fifo has l2p completions */
3800 #define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c
3801 /* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */
3802 #define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094
3803 /* [R 8] Number of entries occupied by vq 0 in pswrq memory */
3804 #define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810
3805 /* [R 8] Number of entries occupied by vq 10 in pswrq memory */
3806 #define PXP2_REG_RQ_VQ10_ENTRY_CNT 0x120818
3807 /* [R 8] Number of entries occupied by vq 11 in pswrq memory */
3808 #define PXP2_REG_RQ_VQ11_ENTRY_CNT 0x120820
3809 /* [R 8] Number of entries occupied by vq 12 in pswrq memory */
3810 #define PXP2_REG_RQ_VQ12_ENTRY_CNT 0x120828
3811 /* [R 8] Number of entries occupied by vq 13 in pswrq memory */
3812 #define PXP2_REG_RQ_VQ13_ENTRY_CNT 0x120830
3813 /* [R 8] Number of entries occupied by vq 14 in pswrq memory */
3814 #define PXP2_REG_RQ_VQ14_ENTRY_CNT 0x120838
3815 /* [R 8] Number of entries occupied by vq 15 in pswrq memory */
3816 #define PXP2_REG_RQ_VQ15_ENTRY_CNT 0x120840
3817 /* [R 8] Number of entries occupied by vq 16 in pswrq memory */
3818 #define PXP2_REG_RQ_VQ16_ENTRY_CNT 0x120848
3819 /* [R 8] Number of entries occupied by vq 17 in pswrq memory */
3820 #define PXP2_REG_RQ_VQ17_ENTRY_CNT 0x120850
3821 /* [R 8] Number of entries occupied by vq 18 in pswrq memory */
3822 #define PXP2_REG_RQ_VQ18_ENTRY_CNT 0x120858
3823 /* [R 8] Number of entries occupied by vq 19 in pswrq memory */
3824 #define PXP2_REG_RQ_VQ19_ENTRY_CNT 0x120860
3825 /* [R 8] Number of entries occupied by vq 1 in pswrq memory */
3826 #define PXP2_REG_RQ_VQ1_ENTRY_CNT 0x120868
3827 /* [R 8] Number of entries occupied by vq 20 in pswrq memory */
3828 #define PXP2_REG_RQ_VQ20_ENTRY_CNT 0x120870
3829 /* [R 8] Number of entries occupied by vq 21 in pswrq memory */
3830 #define PXP2_REG_RQ_VQ21_ENTRY_CNT 0x120878
3831 /* [R 8] Number of entries occupied by vq 22 in pswrq memory */
3832 #define PXP2_REG_RQ_VQ22_ENTRY_CNT 0x120880
3833 /* [R 8] Number of entries occupied by vq 23 in pswrq memory */
3834 #define PXP2_REG_RQ_VQ23_ENTRY_CNT 0x120888
3835 /* [R 8] Number of entries occupied by vq 24 in pswrq memory */
3836 #define PXP2_REG_RQ_VQ24_ENTRY_CNT 0x120890
3837 /* [R 8] Number of entries occupied by vq 25 in pswrq memory */
3838 #define PXP2_REG_RQ_VQ25_ENTRY_CNT 0x120898
3839 /* [R 8] Number of entries occupied by vq 26 in pswrq memory */
3840 #define PXP2_REG_RQ_VQ26_ENTRY_CNT 0x1208a0
3841 /* [R 8] Number of entries occupied by vq 27 in pswrq memory */
3842 #define PXP2_REG_RQ_VQ27_ENTRY_CNT 0x1208a8
3843 /* [R 8] Number of entries occupied by vq 28 in pswrq memory */
3844 #define PXP2_REG_RQ_VQ28_ENTRY_CNT 0x1208b0
3845 /* [R 8] Number of entries occupied by vq 29 in pswrq memory */
3846 #define PXP2_REG_RQ_VQ29_ENTRY_CNT 0x1208b8
3847 /* [R 8] Number of entries occupied by vq 2 in pswrq memory */
3848 #define PXP2_REG_RQ_VQ2_ENTRY_CNT 0x1208c0
3849 /* [R 8] Number of entries occupied by vq 30 in pswrq memory */
3850 #define PXP2_REG_RQ_VQ30_ENTRY_CNT 0x1208c8
3851 /* [R 8] Number of entries occupied by vq 31 in pswrq memory */
3852 #define PXP2_REG_RQ_VQ31_ENTRY_CNT 0x1208d0
3853 /* [R 8] Number of entries occupied by vq 3 in pswrq memory */
3854 #define PXP2_REG_RQ_VQ3_ENTRY_CNT 0x1208d8
3855 /* [R 8] Number of entries occupied by vq 4 in pswrq memory */
3856 #define PXP2_REG_RQ_VQ4_ENTRY_CNT 0x1208e0
3857 /* [R 8] Number of entries occupied by vq 5 in pswrq memory */
3858 #define PXP2_REG_RQ_VQ5_ENTRY_CNT 0x1208e8
3859 /* [R 8] Number of entries occupied by vq 6 in pswrq memory */
3860 #define PXP2_REG_RQ_VQ6_ENTRY_CNT 0x1208f0
3861 /* [R 8] Number of entries occupied by vq 7 in pswrq memory */
3862 #define PXP2_REG_RQ_VQ7_ENTRY_CNT 0x1208f8
3863 /* [R 8] Number of entries occupied by vq 8 in pswrq memory */
3864 #define PXP2_REG_RQ_VQ8_ENTRY_CNT 0x120900
3865 /* [R 8] Number of entries occupied by vq 9 in pswrq memory */
3866 #define PXP2_REG_RQ_VQ9_ENTRY_CNT 0x120908
3867 /* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
3868 001:256B; 010: 512B; */
3869 #define PXP2_REG_RQ_WR_MBS0 0x12015c
3870 /* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
3871 001:256B; 010: 512B; */
3872 #define PXP2_REG_RQ_WR_MBS1 0x120164
3873 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
3874 buffer reaches this number has_payload will be asserted */
3875 #define PXP2_REG_WR_CDU_MPS 0x1205f0
3876 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
3877 buffer reaches this number has_payload will be asserted */
3878 #define PXP2_REG_WR_CSDM_MPS 0x1205d0
3879 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
3880 buffer reaches this number has_payload will be asserted */
3881 #define PXP2_REG_WR_DBG_MPS 0x1205e8
3882 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
3883 buffer reaches this number has_payload will be asserted */
3884 #define PXP2_REG_WR_DMAE_MPS 0x1205ec
3885 /* [RW 10] if Number of entries in dmae fifo will be higher than this
3886 threshold then has_payload indication will be asserted; the default value
3887 should be equal to > write MBS size! */
3888 #define PXP2_REG_WR_DMAE_TH 0x120368
3889 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
3890 buffer reaches this number has_payload will be asserted */
3891 #define PXP2_REG_WR_HC_MPS 0x1205c8
3892 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
3893 buffer reaches this number has_payload will be asserted */
3894 #define PXP2_REG_WR_QM_MPS 0x1205dc
3895 /* [RW 1] 0 - working in A0 mode; - working in B0 mode */
3896 #define PXP2_REG_WR_REV_MODE 0x120670
3897 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
3898 buffer reaches this number has_payload will be asserted */
3899 #define PXP2_REG_WR_SRC_MPS 0x1205e4
3900 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
3901 buffer reaches this number has_payload will be asserted */
3902 #define PXP2_REG_WR_TM_MPS 0x1205e0
3903 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
3904 buffer reaches this number has_payload will be asserted */
3905 #define PXP2_REG_WR_TSDM_MPS 0x1205d4
3906 /* [RW 10] if Number of entries in usdmdp fifo will be higher than this
3907 threshold then has_payload indication will be asserted; the default value
3908 should be equal to > write MBS size! */
3909 #define PXP2_REG_WR_USDMDP_TH 0x120348
3910 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
3911 buffer reaches this number has_payload will be asserted */
3912 #define PXP2_REG_WR_USDM_MPS 0x1205cc
3913 /* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in the
3914 buffer reaches this number has_payload will be asserted */
3915 #define PXP2_REG_WR_XSDM_MPS 0x1205d8
3916 /* [R 1] debug only: Indication if PSWHST arbiter is idle */
3917 #define PXP_REG_HST_ARB_IS_IDLE 0x103004
3918 /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
3919 this client is waiting for the arbiter. */
3920 #define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008
3921 /* [RW 1] When 1; doorbells are discarded and not passed to doorbell queue
3922 block. Should be used for close the gates. */
3923 #define PXP_REG_HST_DISCARD_DOORBELLS 0x1030a4
3924 /* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit
3925 should update according to 'hst_discard_doorbells' register when the state
3926 machine is idle */
3927 #define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0
3928 /* [RW 1] When 1; new internal writes arriving to the block are discarded.
3929 Should be used for close the gates. */
3930 #define PXP_REG_HST_DISCARD_INTERNAL_WRITES 0x1030a8
3931 /* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1'
3932 means this PSWHST is discarding inputs from this client. Each bit should
3933 update according to 'hst_discard_internal_writes' register when the state
3934 machine is idle. */
3935 #define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c
3936 /* [WB 160] Used for initialization of the inbound interrupts memory */
3937 #define PXP_REG_HST_INBOUND_INT 0x103800
3938 /* [RW 7] Indirect access to the permission table. The fields are : {Valid;
3939 * VFID[5:0]}
3940 */
3941 #define PXP_REG_HST_ZONE_PERMISSION_TABLE 0x103400
3942 /* [RW 32] Interrupt mask register #0 read/write */
3943 #define PXP_REG_PXP_INT_MASK_0 0x103074
3944 #define PXP_REG_PXP_INT_MASK_1 0x103084
3945 /* [R 32] Interrupt register #0 read */
3946 #define PXP_REG_PXP_INT_STS_0 0x103068
3947 #define PXP_REG_PXP_INT_STS_1 0x103078
3948 /* [RC 32] Interrupt register #0 read clear */
3949 #define PXP_REG_PXP_INT_STS_CLR_0 0x10306c
3950 #define PXP_REG_PXP_INT_STS_CLR_1 0x10307c
3951 /* [RW 27] Parity mask register #0 read/write */
3952 #define PXP_REG_PXP_PRTY_MASK 0x103094
3953 /* [R 26] Parity register #0 read */
3954 #define PXP_REG_PXP_PRTY_STS 0x103088
3955 /* [RC 27] Parity register #0 read clear */
3956 #define PXP_REG_PXP_PRTY_STS_CLR 0x10308c
3957 /* [RW 4] The activity counter initial increment value sent in the load
3958 request */
3959 #define QM_REG_ACTCTRINITVAL_0 0x168040
3960 #define QM_REG_ACTCTRINITVAL_1 0x168044
3961 #define QM_REG_ACTCTRINITVAL_2 0x168048
3962 #define QM_REG_ACTCTRINITVAL_3 0x16804c
3963 /* [RW 32] The base logical address (in bytes) of each physical queue. The
3964 index I represents the physical queue number. The 12 lsbs are ignore and
3965 considered zero so practically there are only 20 bits in this register;
3966 queues 63-0 */
3967 #define QM_REG_BASEADDR 0x168900
3968 /* [RW 32] The base logical address (in bytes) of each physical queue. The
3969 index I represents the physical queue number. The 12 lsbs are ignore and
3970 considered zero so practically there are only 20 bits in this register;
3971 queues 127-64 */
3972 #define QM_REG_BASEADDR_EXT_A 0x16e100
3973 /* [RW 16] The byte credit cost for each task. This value is for both ports */
3974 #define QM_REG_BYTECRDCOST 0x168234
3975 /* [RW 16] The initial byte credit value for both ports. */
3976 #define QM_REG_BYTECRDINITVAL 0x168238
3977 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
3978 queue uses port 0 else it uses port 1; queues 31-0 */
3979 #define QM_REG_BYTECRDPORT_LSB 0x168228
3980 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
3981 queue uses port 0 else it uses port 1; queues 95-64 */
3982 #define QM_REG_BYTECRDPORT_LSB_EXT_A 0x16e520
3983 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
3984 queue uses port 0 else it uses port 1; queues 63-32 */
3985 #define QM_REG_BYTECRDPORT_MSB 0x168224
3986 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
3987 queue uses port 0 else it uses port 1; queues 127-96 */
3988 #define QM_REG_BYTECRDPORT_MSB_EXT_A 0x16e51c
3989 /* [RW 16] The byte credit value that if above the QM is considered almost
3990 full */
3991 #define QM_REG_BYTECREDITAFULLTHR 0x168094
3992 /* [RW 4] The initial credit for interface */
3993 #define QM_REG_CMINITCRD_0 0x1680cc
3994 #define QM_REG_BYTECRDCMDQ_0 0x16e6e8
3995 #define QM_REG_CMINITCRD_1 0x1680d0
3996 #define QM_REG_CMINITCRD_2 0x1680d4
3997 #define QM_REG_CMINITCRD_3 0x1680d8
3998 #define QM_REG_CMINITCRD_4 0x1680dc
3999 #define QM_REG_CMINITCRD_5 0x1680e0
4000 #define QM_REG_CMINITCRD_6 0x1680e4
4001 #define QM_REG_CMINITCRD_7 0x1680e8
4002 /* [RW 8] A mask bit per CM interface. If this bit is 0 then this interface
4003 is masked */
4004 #define QM_REG_CMINTEN 0x1680ec
4005 /* [RW 12] A bit vector which indicates which one of the queues are tied to
4006 interface 0 */
4007 #define QM_REG_CMINTVOQMASK_0 0x1681f4
4008 #define QM_REG_CMINTVOQMASK_1 0x1681f8
4009 #define QM_REG_CMINTVOQMASK_2 0x1681fc
4010 #define QM_REG_CMINTVOQMASK_3 0x168200
4011 #define QM_REG_CMINTVOQMASK_4 0x168204
4012 #define QM_REG_CMINTVOQMASK_5 0x168208
4013 #define QM_REG_CMINTVOQMASK_6 0x16820c
4014 #define QM_REG_CMINTVOQMASK_7 0x168210
4015 /* [RW 20] The number of connections divided by 16 which dictates the size
4016 of each queue which belongs to even function number. */
4017 #define QM_REG_CONNNUM_0 0x168020
4018 /* [R 6] Keep the fill level of the fifo from write client 4 */
4019 #define QM_REG_CQM_WRC_FIFOLVL 0x168018
4020 /* [RW 8] The context regions sent in the CFC load request */
4021 #define QM_REG_CTXREG_0 0x168030
4022 #define QM_REG_CTXREG_1 0x168034
4023 #define QM_REG_CTXREG_2 0x168038
4024 #define QM_REG_CTXREG_3 0x16803c
4025 /* [RW 12] The VOQ mask used to select the VOQs which needs to be full for
4026 bypass enable */
4027 #define QM_REG_ENBYPVOQMASK 0x16823c
4028 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
4029 physical queue uses the byte credit; queues 31-0 */
4030 #define QM_REG_ENBYTECRD_LSB 0x168220
4031 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
4032 physical queue uses the byte credit; queues 95-64 */
4033 #define QM_REG_ENBYTECRD_LSB_EXT_A 0x16e518
4034 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
4035 physical queue uses the byte credit; queues 63-32 */
4036 #define QM_REG_ENBYTECRD_MSB 0x16821c
4037 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
4038 physical queue uses the byte credit; queues 127-96 */
4039 #define QM_REG_ENBYTECRD_MSB_EXT_A 0x16e514
4040 /* [RW 4] If cleared then the secondary interface will not be served by the
4041 RR arbiter */
4042 #define QM_REG_ENSEC 0x1680f0
4043 /* [RW 32] NA */
4044 #define QM_REG_FUNCNUMSEL_LSB 0x168230
4045 /* [RW 32] NA */
4046 #define QM_REG_FUNCNUMSEL_MSB 0x16822c
4047 /* [RW 32] A mask register to mask the Almost empty signals which will not
4048 be use for the almost empty indication to the HW block; queues 31:0 */
4049 #define QM_REG_HWAEMPTYMASK_LSB 0x168218
4050 /* [RW 32] A mask register to mask the Almost empty signals which will not
4051 be use for the almost empty indication to the HW block; queues 95-64 */
4052 #define QM_REG_HWAEMPTYMASK_LSB_EXT_A 0x16e510
4053 /* [RW 32] A mask register to mask the Almost empty signals which will not
4054 be use for the almost empty indication to the HW block; queues 63:32 */
4055 #define QM_REG_HWAEMPTYMASK_MSB 0x168214
4056 /* [RW 32] A mask register to mask the Almost empty signals which will not
4057 be use for the almost empty indication to the HW block; queues 127-96 */
4058 #define QM_REG_HWAEMPTYMASK_MSB_EXT_A 0x16e50c
4059 /* [RW 4] The number of outstanding request to CFC */
4060 #define QM_REG_OUTLDREQ 0x168804
4061 /* [RC 1] A flag to indicate that overflow error occurred in one of the
4062 queues. */
4063 #define QM_REG_OVFERROR 0x16805c
4064 /* [RC 7] the Q where the overflow occurs */
4065 #define QM_REG_OVFQNUM 0x168058
4066 /* [R 16] Pause state for physical queues 15-0 */
4067 #define QM_REG_PAUSESTATE0 0x168410
4068 /* [R 16] Pause state for physical queues 31-16 */
4069 #define QM_REG_PAUSESTATE1 0x168414
4070 /* [R 16] Pause state for physical queues 47-32 */
4071 #define QM_REG_PAUSESTATE2 0x16e684
4072 /* [R 16] Pause state for physical queues 63-48 */
4073 #define QM_REG_PAUSESTATE3 0x16e688
4074 /* [R 16] Pause state for physical queues 79-64 */
4075 #define QM_REG_PAUSESTATE4 0x16e68c
4076 /* [R 16] Pause state for physical queues 95-80 */
4077 #define QM_REG_PAUSESTATE5 0x16e690
4078 /* [R 16] Pause state for physical queues 111-96 */
4079 #define QM_REG_PAUSESTATE6 0x16e694
4080 /* [R 16] Pause state for physical queues 127-112 */
4081 #define QM_REG_PAUSESTATE7 0x16e698
4082 /* [RW 2] The PCI attributes field used in the PCI request. */
4083 #define QM_REG_PCIREQAT 0x168054
4084 #define QM_REG_PF_EN 0x16e70c
4085 /* [R 24] The number of tasks stored in the QM for the PF. only even
4086 * functions are valid in E2 (odd I registers will be hard wired to 0) */
4087 #define QM_REG_PF_USG_CNT_0 0x16e040
4088 /* [R 16] NOT USED */
4089 #define QM_REG_PORT0BYTECRD 0x168300
4090 /* [R 16] The byte credit of port 1 */
4091 #define QM_REG_PORT1BYTECRD 0x168304
4092 /* [RW 3] pci function number of queues 15-0 */
4093 #define QM_REG_PQ2PCIFUNC_0 0x16e6bc
4094 #define QM_REG_PQ2PCIFUNC_1 0x16e6c0
4095 #define QM_REG_PQ2PCIFUNC_2 0x16e6c4
4096 #define QM_REG_PQ2PCIFUNC_3 0x16e6c8
4097 #define QM_REG_PQ2PCIFUNC_4 0x16e6cc
4098 #define QM_REG_PQ2PCIFUNC_5 0x16e6d0
4099 #define QM_REG_PQ2PCIFUNC_6 0x16e6d4
4100 #define QM_REG_PQ2PCIFUNC_7 0x16e6d8
4101 /* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow:
4102 ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
4103 bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
4104 #define QM_REG_PTRTBL 0x168a00
4105 /* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow:
4106 ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
4107 bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
4108 #define QM_REG_PTRTBL_EXT_A 0x16e200
4109 /* [RW 2] Interrupt mask register #0 read/write */
4110 #define QM_REG_QM_INT_MASK 0x168444
4111 /* [R 2] Interrupt register #0 read */
4112 #define QM_REG_QM_INT_STS 0x168438
4113 /* [RW 12] Parity mask register #0 read/write */
4114 #define QM_REG_QM_PRTY_MASK 0x168454
4115 /* [R 12] Parity register #0 read */
4116 #define QM_REG_QM_PRTY_STS 0x168448
4117 /* [RC 12] Parity register #0 read clear */
4118 #define QM_REG_QM_PRTY_STS_CLR 0x16844c
4119 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */
4120 #define QM_REG_QSTATUS_HIGH 0x16802c
4121 /* [R 32] Current queues in pipeline: Queues from 96 to 127 */
4122 #define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408
4123 /* [R 32] Current queues in pipeline: Queues from 0 to 31 */
4124 #define QM_REG_QSTATUS_LOW 0x168028
4125 /* [R 32] Current queues in pipeline: Queues from 64 to 95 */
4126 #define QM_REG_QSTATUS_LOW_EXT_A 0x16e404
4127 /* [R 24] The number of tasks queued for each queue; queues 63-0 */
4128 #define QM_REG_QTASKCTR_0 0x168308
4129 /* [R 24] The number of tasks queued for each queue; queues 127-64 */
4130 #define QM_REG_QTASKCTR_EXT_A_0 0x16e584
4131 /* [RW 4] Queue tied to VOQ */
4132 #define QM_REG_QVOQIDX_0 0x1680f4
4133 #define QM_REG_QVOQIDX_10 0x16811c
4134 #define QM_REG_QVOQIDX_100 0x16e49c
4135 #define QM_REG_QVOQIDX_101 0x16e4a0
4136 #define QM_REG_QVOQIDX_102 0x16e4a4
4137 #define QM_REG_QVOQIDX_103 0x16e4a8
4138 #define QM_REG_QVOQIDX_104 0x16e4ac
4139 #define QM_REG_QVOQIDX_105 0x16e4b0
4140 #define QM_REG_QVOQIDX_106 0x16e4b4
4141 #define QM_REG_QVOQIDX_107 0x16e4b8
4142 #define QM_REG_QVOQIDX_108 0x16e4bc
4143 #define QM_REG_QVOQIDX_109 0x16e4c0
4144 #define QM_REG_QVOQIDX_11 0x168120
4145 #define QM_REG_QVOQIDX_110 0x16e4c4
4146 #define QM_REG_QVOQIDX_111 0x16e4c8
4147 #define QM_REG_QVOQIDX_112 0x16e4cc
4148 #define QM_REG_QVOQIDX_113 0x16e4d0
4149 #define QM_REG_QVOQIDX_114 0x16e4d4
4150 #define QM_REG_QVOQIDX_115 0x16e4d8
4151 #define QM_REG_QVOQIDX_116 0x16e4dc
4152 #define QM_REG_QVOQIDX_117 0x16e4e0
4153 #define QM_REG_QVOQIDX_118 0x16e4e4
4154 #define QM_REG_QVOQIDX_119 0x16e4e8
4155 #define QM_REG_QVOQIDX_12 0x168124
4156 #define QM_REG_QVOQIDX_120 0x16e4ec
4157 #define QM_REG_QVOQIDX_121 0x16e4f0
4158 #define QM_REG_QVOQIDX_122 0x16e4f4
4159 #define QM_REG_QVOQIDX_123 0x16e4f8
4160 #define QM_REG_QVOQIDX_124 0x16e4fc
4161 #define QM_REG_QVOQIDX_125 0x16e500
4162 #define QM_REG_QVOQIDX_126 0x16e504
4163 #define QM_REG_QVOQIDX_127 0x16e508
4164 #define QM_REG_QVOQIDX_13 0x168128
4165 #define QM_REG_QVOQIDX_14 0x16812c
4166 #define QM_REG_QVOQIDX_15 0x168130
4167 #define QM_REG_QVOQIDX_16 0x168134
4168 #define QM_REG_QVOQIDX_17 0x168138
4169 #define QM_REG_QVOQIDX_21 0x168148
4170 #define QM_REG_QVOQIDX_22 0x16814c
4171 #define QM_REG_QVOQIDX_23 0x168150
4172 #define QM_REG_QVOQIDX_24 0x168154
4173 #define QM_REG_QVOQIDX_25 0x168158
4174 #define QM_REG_QVOQIDX_26 0x16815c
4175 #define QM_REG_QVOQIDX_27 0x168160
4176 #define QM_REG_QVOQIDX_28 0x168164
4177 #define QM_REG_QVOQIDX_29 0x168168
4178 #define QM_REG_QVOQIDX_30 0x16816c
4179 #define QM_REG_QVOQIDX_31 0x168170
4180 #define QM_REG_QVOQIDX_32 0x168174
4181 #define QM_REG_QVOQIDX_33 0x168178
4182 #define QM_REG_QVOQIDX_34 0x16817c
4183 #define QM_REG_QVOQIDX_35 0x168180
4184 #define QM_REG_QVOQIDX_36 0x168184
4185 #define QM_REG_QVOQIDX_37 0x168188
4186 #define QM_REG_QVOQIDX_38 0x16818c
4187 #define QM_REG_QVOQIDX_39 0x168190
4188 #define QM_REG_QVOQIDX_40 0x168194
4189 #define QM_REG_QVOQIDX_41 0x168198
4190 #define QM_REG_QVOQIDX_42 0x16819c
4191 #define QM_REG_QVOQIDX_43 0x1681a0
4192 #define QM_REG_QVOQIDX_44 0x1681a4
4193 #define QM_REG_QVOQIDX_45 0x1681a8
4194 #define QM_REG_QVOQIDX_46 0x1681ac
4195 #define QM_REG_QVOQIDX_47 0x1681b0
4196 #define QM_REG_QVOQIDX_48 0x1681b4
4197 #define QM_REG_QVOQIDX_49 0x1681b8
4198 #define QM_REG_QVOQIDX_5 0x168108
4199 #define QM_REG_QVOQIDX_50 0x1681bc
4200 #define QM_REG_QVOQIDX_51 0x1681c0
4201 #define QM_REG_QVOQIDX_52 0x1681c4
4202 #define QM_REG_QVOQIDX_53 0x1681c8
4203 #define QM_REG_QVOQIDX_54 0x1681cc
4204 #define QM_REG_QVOQIDX_55 0x1681d0
4205 #define QM_REG_QVOQIDX_56 0x1681d4
4206 #define QM_REG_QVOQIDX_57 0x1681d8
4207 #define QM_REG_QVOQIDX_58 0x1681dc
4208 #define QM_REG_QVOQIDX_59 0x1681e0
4209 #define QM_REG_QVOQIDX_6 0x16810c
4210 #define QM_REG_QVOQIDX_60 0x1681e4
4211 #define QM_REG_QVOQIDX_61 0x1681e8
4212 #define QM_REG_QVOQIDX_62 0x1681ec
4213 #define QM_REG_QVOQIDX_63 0x1681f0
4214 #define QM_REG_QVOQIDX_64 0x16e40c
4215 #define QM_REG_QVOQIDX_65 0x16e410
4216 #define QM_REG_QVOQIDX_69 0x16e420
4217 #define QM_REG_QVOQIDX_7 0x168110
4218 #define QM_REG_QVOQIDX_70 0x16e424
4219 #define QM_REG_QVOQIDX_71 0x16e428
4220 #define QM_REG_QVOQIDX_72 0x16e42c
4221 #define QM_REG_QVOQIDX_73 0x16e430
4222 #define QM_REG_QVOQIDX_74 0x16e434
4223 #define QM_REG_QVOQIDX_75 0x16e438
4224 #define QM_REG_QVOQIDX_76 0x16e43c
4225 #define QM_REG_QVOQIDX_77 0x16e440
4226 #define QM_REG_QVOQIDX_78 0x16e444
4227 #define QM_REG_QVOQIDX_79 0x16e448
4228 #define QM_REG_QVOQIDX_8 0x168114
4229 #define QM_REG_QVOQIDX_80 0x16e44c
4230 #define QM_REG_QVOQIDX_81 0x16e450
4231 #define QM_REG_QVOQIDX_85 0x16e460
4232 #define QM_REG_QVOQIDX_86 0x16e464
4233 #define QM_REG_QVOQIDX_87 0x16e468
4234 #define QM_REG_QVOQIDX_88 0x16e46c
4235 #define QM_REG_QVOQIDX_89 0x16e470
4236 #define QM_REG_QVOQIDX_9 0x168118
4237 #define QM_REG_QVOQIDX_90 0x16e474
4238 #define QM_REG_QVOQIDX_91 0x16e478
4239 #define QM_REG_QVOQIDX_92 0x16e47c
4240 #define QM_REG_QVOQIDX_93 0x16e480
4241 #define QM_REG_QVOQIDX_94 0x16e484
4242 #define QM_REG_QVOQIDX_95 0x16e488
4243 #define QM_REG_QVOQIDX_96 0x16e48c
4244 #define QM_REG_QVOQIDX_97 0x16e490
4245 #define QM_REG_QVOQIDX_98 0x16e494
4246 #define QM_REG_QVOQIDX_99 0x16e498
4247 /* [RW 1] Initialization bit command */
4248 #define QM_REG_SOFT_RESET 0x168428
4249 /* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
4250 #define QM_REG_TASKCRDCOST_0 0x16809c
4251 #define QM_REG_TASKCRDCOST_1 0x1680a0
4252 #define QM_REG_TASKCRDCOST_2 0x1680a4
4253 #define QM_REG_TASKCRDCOST_4 0x1680ac
4254 #define QM_REG_TASKCRDCOST_5 0x1680b0
4255 /* [R 6] Keep the fill level of the fifo from write client 3 */
4256 #define QM_REG_TQM_WRC_FIFOLVL 0x168010
4257 /* [R 6] Keep the fill level of the fifo from write client 2 */
4258 #define QM_REG_UQM_WRC_FIFOLVL 0x168008
4259 /* [RC 32] Credit update error register */
4260 #define QM_REG_VOQCRDERRREG 0x168408
4261 /* [R 16] The credit value for each VOQ */
4262 #define QM_REG_VOQCREDIT_0 0x1682d0
4263 #define QM_REG_VOQCREDIT_1 0x1682d4
4264 #define QM_REG_VOQCREDIT_4 0x1682e0
4265 /* [RW 16] The credit value that if above the QM is considered almost full */
4266 #define QM_REG_VOQCREDITAFULLTHR 0x168090
4267 /* [RW 16] The init and maximum credit for each VoQ */
4268 #define QM_REG_VOQINITCREDIT_0 0x168060
4269 #define QM_REG_VOQINITCREDIT_1 0x168064
4270 #define QM_REG_VOQINITCREDIT_2 0x168068
4271 #define QM_REG_VOQINITCREDIT_4 0x168070
4272 #define QM_REG_VOQINITCREDIT_5 0x168074
4273 /* [RW 1] The port of which VOQ belongs */
4274 #define QM_REG_VOQPORT_0 0x1682a0
4275 #define QM_REG_VOQPORT_1 0x1682a4
4276 #define QM_REG_VOQPORT_2 0x1682a8
4277 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
4278 #define QM_REG_VOQQMASK_0_LSB 0x168240
4279 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
4280 #define QM_REG_VOQQMASK_0_LSB_EXT_A 0x16e524
4281 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
4282 #define QM_REG_VOQQMASK_0_MSB 0x168244
4283 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
4284 #define QM_REG_VOQQMASK_0_MSB_EXT_A 0x16e528
4285 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
4286 #define QM_REG_VOQQMASK_10_LSB 0x168290
4287 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
4288 #define QM_REG_VOQQMASK_10_LSB_EXT_A 0x16e574
4289 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
4290 #define QM_REG_VOQQMASK_10_MSB 0x168294
4291 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
4292 #define QM_REG_VOQQMASK_10_MSB_EXT_A 0x16e578
4293 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
4294 #define QM_REG_VOQQMASK_11_LSB 0x168298
4295 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
4296 #define QM_REG_VOQQMASK_11_LSB_EXT_A 0x16e57c
4297 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
4298 #define QM_REG_VOQQMASK_11_MSB 0x16829c
4299 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
4300 #define QM_REG_VOQQMASK_11_MSB_EXT_A 0x16e580
4301 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
4302 #define QM_REG_VOQQMASK_1_LSB 0x168248
4303 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
4304 #define QM_REG_VOQQMASK_1_LSB_EXT_A 0x16e52c
4305 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
4306 #define QM_REG_VOQQMASK_1_MSB 0x16824c
4307 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
4308 #define QM_REG_VOQQMASK_1_MSB_EXT_A 0x16e530
4309 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
4310 #define QM_REG_VOQQMASK_2_LSB 0x168250
4311 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
4312 #define QM_REG_VOQQMASK_2_LSB_EXT_A 0x16e534
4313 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
4314 #define QM_REG_VOQQMASK_2_MSB 0x168254
4315 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
4316 #define QM_REG_VOQQMASK_2_MSB_EXT_A 0x16e538
4317 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
4318 #define QM_REG_VOQQMASK_3_LSB 0x168258
4319 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
4320 #define QM_REG_VOQQMASK_3_LSB_EXT_A 0x16e53c
4321 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
4322 #define QM_REG_VOQQMASK_3_MSB_EXT_A 0x16e540
4323 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
4324 #define QM_REG_VOQQMASK_4_LSB 0x168260
4325 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
4326 #define QM_REG_VOQQMASK_4_LSB_EXT_A 0x16e544
4327 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
4328 #define QM_REG_VOQQMASK_4_MSB 0x168264
4329 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
4330 #define QM_REG_VOQQMASK_4_MSB_EXT_A 0x16e548
4331 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
4332 #define QM_REG_VOQQMASK_5_LSB 0x168268
4333 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
4334 #define QM_REG_VOQQMASK_5_LSB_EXT_A 0x16e54c
4335 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
4336 #define QM_REG_VOQQMASK_5_MSB 0x16826c
4337 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
4338 #define QM_REG_VOQQMASK_5_MSB_EXT_A 0x16e550
4339 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
4340 #define QM_REG_VOQQMASK_6_LSB 0x168270
4341 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
4342 #define QM_REG_VOQQMASK_6_LSB_EXT_A 0x16e554
4343 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
4344 #define QM_REG_VOQQMASK_6_MSB 0x168274
4345 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
4346 #define QM_REG_VOQQMASK_6_MSB_EXT_A 0x16e558
4347 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
4348 #define QM_REG_VOQQMASK_7_LSB 0x168278
4349 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
4350 #define QM_REG_VOQQMASK_7_LSB_EXT_A 0x16e55c
4351 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
4352 #define QM_REG_VOQQMASK_7_MSB 0x16827c
4353 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
4354 #define QM_REG_VOQQMASK_7_MSB_EXT_A 0x16e560
4355 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
4356 #define QM_REG_VOQQMASK_8_LSB 0x168280
4357 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
4358 #define QM_REG_VOQQMASK_8_LSB_EXT_A 0x16e564
4359 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
4360 #define QM_REG_VOQQMASK_8_MSB 0x168284
4361 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
4362 #define QM_REG_VOQQMASK_8_MSB_EXT_A 0x16e568
4363 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
4364 #define QM_REG_VOQQMASK_9_LSB 0x168288
4365 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
4366 #define QM_REG_VOQQMASK_9_LSB_EXT_A 0x16e56c
4367 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
4368 #define QM_REG_VOQQMASK_9_MSB_EXT_A 0x16e570
4369 /* [RW 32] Wrr weights */
4370 #define QM_REG_WRRWEIGHTS_0 0x16880c
4371 #define QM_REG_WRRWEIGHTS_1 0x168810
4372 #define QM_REG_WRRWEIGHTS_10 0x168814
4373 #define QM_REG_WRRWEIGHTS_11 0x168818
4374 #define QM_REG_WRRWEIGHTS_12 0x16881c
4375 #define QM_REG_WRRWEIGHTS_13 0x168820
4376 #define QM_REG_WRRWEIGHTS_14 0x168824
4377 #define QM_REG_WRRWEIGHTS_15 0x168828
4378 #define QM_REG_WRRWEIGHTS_16 0x16e000
4379 #define QM_REG_WRRWEIGHTS_17 0x16e004
4380 #define QM_REG_WRRWEIGHTS_18 0x16e008
4381 #define QM_REG_WRRWEIGHTS_19 0x16e00c
4382 #define QM_REG_WRRWEIGHTS_2 0x16882c
4383 #define QM_REG_WRRWEIGHTS_20 0x16e010
4384 #define QM_REG_WRRWEIGHTS_21 0x16e014
4385 #define QM_REG_WRRWEIGHTS_22 0x16e018
4386 #define QM_REG_WRRWEIGHTS_23 0x16e01c
4387 #define QM_REG_WRRWEIGHTS_24 0x16e020
4388 #define QM_REG_WRRWEIGHTS_25 0x16e024
4389 #define QM_REG_WRRWEIGHTS_26 0x16e028
4390 #define QM_REG_WRRWEIGHTS_27 0x16e02c
4391 #define QM_REG_WRRWEIGHTS_28 0x16e030
4392 #define QM_REG_WRRWEIGHTS_29 0x16e034
4393 #define QM_REG_WRRWEIGHTS_3 0x168830
4394 #define QM_REG_WRRWEIGHTS_30 0x16e038
4395 #define QM_REG_WRRWEIGHTS_31 0x16e03c
4396 #define QM_REG_WRRWEIGHTS_4 0x168834
4397 #define QM_REG_WRRWEIGHTS_5 0x168838
4398 #define QM_REG_WRRWEIGHTS_6 0x16883c
4399 #define QM_REG_WRRWEIGHTS_7 0x168840
4400 #define QM_REG_WRRWEIGHTS_8 0x168844
4401 #define QM_REG_WRRWEIGHTS_9 0x168848
4402 /* [R 6] Keep the fill level of the fifo from write client 1 */
4403 #define QM_REG_XQM_WRC_FIFOLVL 0x168000
4404 /* [W 1] reset to parity interrupt */
4405 #define SEM_FAST_REG_PARITY_RST 0x18840
4406 #define SRC_REG_COUNTFREE0 0x40500
4407 /* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
4408 ports. If set the searcher support 8 functions. */
4409 #define SRC_REG_E1HMF_ENABLE 0x404cc
4410 #define SRC_REG_FIRSTFREE0 0x40510
4411 #define SRC_REG_KEYRSS0_0 0x40408
4412 #define SRC_REG_KEYRSS0_7 0x40424
4413 #define SRC_REG_KEYRSS1_9 0x40454
4414 #define SRC_REG_KEYSEARCH_0 0x40458
4415 #define SRC_REG_KEYSEARCH_1 0x4045c
4416 #define SRC_REG_KEYSEARCH_2 0x40460
4417 #define SRC_REG_KEYSEARCH_3 0x40464
4418 #define SRC_REG_KEYSEARCH_4 0x40468
4419 #define SRC_REG_KEYSEARCH_5 0x4046c
4420 #define SRC_REG_KEYSEARCH_6 0x40470
4421 #define SRC_REG_KEYSEARCH_7 0x40474
4422 #define SRC_REG_KEYSEARCH_8 0x40478
4423 #define SRC_REG_KEYSEARCH_9 0x4047c
4424 #define SRC_REG_LASTFREE0 0x40530
4425 #define SRC_REG_NUMBER_HASH_BITS0 0x40400
4426 /* [RW 1] Reset internal state machines. */
4427 #define SRC_REG_SOFT_RST 0x4049c
4428 /* [R 3] Interrupt register #0 read */
4429 #define SRC_REG_SRC_INT_STS 0x404ac
4430 /* [RW 3] Parity mask register #0 read/write */
4431 #define SRC_REG_SRC_PRTY_MASK 0x404c8
4432 /* [R 3] Parity register #0 read */
4433 #define SRC_REG_SRC_PRTY_STS 0x404bc
4434 /* [RC 3] Parity register #0 read clear */
4435 #define SRC_REG_SRC_PRTY_STS_CLR 0x404c0
4436 /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
4437 #define TCM_REG_CAM_OCCUP 0x5017c
4438 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
4439 disregarded; valid output is deasserted; all other signals are treated as
4440 usual; if 1 - normal activity. */
4441 #define TCM_REG_CDU_AG_RD_IFEN 0x50034
4442 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
4443 are disregarded; all other signals are treated as usual; if 1 - normal
4444 activity. */
4445 #define TCM_REG_CDU_AG_WR_IFEN 0x50030
4446 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
4447 disregarded; valid output is deasserted; all other signals are treated as
4448 usual; if 1 - normal activity. */
4449 #define TCM_REG_CDU_SM_RD_IFEN 0x5003c
4450 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
4451 input is disregarded; all other signals are treated as usual; if 1 -
4452 normal activity. */
4453 #define TCM_REG_CDU_SM_WR_IFEN 0x50038
4454 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
4455 the initial credit value; read returns the current value of the credit
4456 counter. Must be initialized to 1 at start-up. */
4457 #define TCM_REG_CFC_INIT_CRD 0x50204
4458 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
4459 weight 8 (the most prioritised); 1 stands for weight 1(least
4460 prioritised); 2 stands for weight 2; tc. */
4461 #define TCM_REG_CP_WEIGHT 0x500c0
4462 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
4463 disregarded; acknowledge output is deasserted; all other signals are
4464 treated as usual; if 1 - normal activity. */
4465 #define TCM_REG_CSEM_IFEN 0x5002c
4466 /* [RC 1] Message length mismatch (relative to last indication) at the In#9
4467 interface. */
4468 #define TCM_REG_CSEM_LENGTH_MIS 0x50174
4469 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
4470 weight 8 (the most prioritised); 1 stands for weight 1(least
4471 prioritised); 2 stands for weight 2; tc. */
4472 #define TCM_REG_CSEM_WEIGHT 0x500bc
4473 /* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */
4474 #define TCM_REG_ERR_EVNT_ID 0x500a0
4475 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
4476 #define TCM_REG_ERR_TCM_HDR 0x5009c
4477 /* [RW 8] The Event ID for Timers expiration. */
4478 #define TCM_REG_EXPR_EVNT_ID 0x500a4
4479 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
4480 writes the initial credit value; read returns the current value of the
4481 credit counter. Must be initialized to 64 at start-up. */
4482 #define TCM_REG_FIC0_INIT_CRD 0x5020c
4483 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
4484 writes the initial credit value; read returns the current value of the
4485 credit counter. Must be initialized to 64 at start-up. */
4486 #define TCM_REG_FIC1_INIT_CRD 0x50210
4487 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
4488 - strict priority defined by ~tcm_registers_gr_ag_pr.gr_ag_pr;
4489 ~tcm_registers_gr_ld0_pr.gr_ld0_pr and
4490 ~tcm_registers_gr_ld1_pr.gr_ld1_pr. */
4491 #define TCM_REG_GR_ARB_TYPE 0x50114
4492 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
4493 highest priority is 3. It is supposed that the Store channel is the
4494 complement of the other 3 groups. */
4495 #define TCM_REG_GR_LD0_PR 0x5011c
4496 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
4497 highest priority is 3. It is supposed that the Store channel is the
4498 complement of the other 3 groups. */
4499 #define TCM_REG_GR_LD1_PR 0x50120
4500 /* [RW 4] The number of double REG-pairs; loaded from the STORM context and
4501 sent to STORM; for a specific connection type. The double REG-pairs are
4502 used to align to STORM context row size of 128 bits. The offset of these
4503 data in the STORM context is always 0. Index _i stands for the connection
4504 type (one of 16). */
4505 #define TCM_REG_N_SM_CTX_LD_0 0x50050
4506 #define TCM_REG_N_SM_CTX_LD_1 0x50054
4507 #define TCM_REG_N_SM_CTX_LD_2 0x50058
4508 #define TCM_REG_N_SM_CTX_LD_3 0x5005c
4509 #define TCM_REG_N_SM_CTX_LD_4 0x50060
4510 #define TCM_REG_N_SM_CTX_LD_5 0x50064
4511 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
4512 acknowledge output is deasserted; all other signals are treated as usual;
4513 if 1 - normal activity. */
4514 #define TCM_REG_PBF_IFEN 0x50024
4515 /* [RC 1] Message length mismatch (relative to last indication) at the In#7
4516 interface. */
4517 #define TCM_REG_PBF_LENGTH_MIS 0x5016c
4518 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
4519 weight 8 (the most prioritised); 1 stands for weight 1(least
4520 prioritised); 2 stands for weight 2; tc. */
4521 #define TCM_REG_PBF_WEIGHT 0x500b4
4522 #define TCM_REG_PHYS_QNUM0_0 0x500e0
4523 #define TCM_REG_PHYS_QNUM0_1 0x500e4
4524 #define TCM_REG_PHYS_QNUM1_0 0x500e8
4525 #define TCM_REG_PHYS_QNUM1_1 0x500ec
4526 #define TCM_REG_PHYS_QNUM2_0 0x500f0
4527 #define TCM_REG_PHYS_QNUM2_1 0x500f4
4528 #define TCM_REG_PHYS_QNUM3_0 0x500f8
4529 #define TCM_REG_PHYS_QNUM3_1 0x500fc
4530 /* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded;
4531 acknowledge output is deasserted; all other signals are treated as usual;
4532 if 1 - normal activity. */
4533 #define TCM_REG_PRS_IFEN 0x50020
4534 /* [RC 1] Message length mismatch (relative to last indication) at the In#6
4535 interface. */
4536 #define TCM_REG_PRS_LENGTH_MIS 0x50168
4537 /* [RW 3] The weight of the input prs in the WRR mechanism. 0 stands for
4538 weight 8 (the most prioritised); 1 stands for weight 1(least
4539 prioritised); 2 stands for weight 2; tc. */
4540 #define TCM_REG_PRS_WEIGHT 0x500b0
4541 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
4542 #define TCM_REG_STOP_EVNT_ID 0x500a8
4543 /* [RC 1] Message length mismatch (relative to last indication) at the STORM
4544 interface. */
4545 #define TCM_REG_STORM_LENGTH_MIS 0x50160
4546 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
4547 disregarded; acknowledge output is deasserted; all other signals are
4548 treated as usual; if 1 - normal activity. */
4549 #define TCM_REG_STORM_TCM_IFEN 0x50010
4550 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
4551 weight 8 (the most prioritised); 1 stands for weight 1(least
4552 prioritised); 2 stands for weight 2; tc. */
4553 #define TCM_REG_STORM_WEIGHT 0x500ac
4554 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
4555 acknowledge output is deasserted; all other signals are treated as usual;
4556 if 1 - normal activity. */
4557 #define TCM_REG_TCM_CFC_IFEN 0x50040
4558 /* [RW 11] Interrupt mask register #0 read/write */
4559 #define TCM_REG_TCM_INT_MASK 0x501dc
4560 /* [R 11] Interrupt register #0 read */
4561 #define TCM_REG_TCM_INT_STS 0x501d0
4562 /* [RW 27] Parity mask register #0 read/write */
4563 #define TCM_REG_TCM_PRTY_MASK 0x501ec
4564 /* [R 27] Parity register #0 read */
4565 #define TCM_REG_TCM_PRTY_STS 0x501e0
4566 /* [RC 27] Parity register #0 read clear */
4567 #define TCM_REG_TCM_PRTY_STS_CLR 0x501e4
4568 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
4569 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
4570 Is used to determine the number of the AG context REG-pairs written back;
4571 when the input message Reg1WbFlg isn't set. */
4572 #define TCM_REG_TCM_REG0_SZ 0x500d8
4573 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
4574 disregarded; valid is deasserted; all other signals are treated as usual;
4575 if 1 - normal activity. */
4576 #define TCM_REG_TCM_STORM0_IFEN 0x50004
4577 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
4578 disregarded; valid is deasserted; all other signals are treated as usual;
4579 if 1 - normal activity. */
4580 #define TCM_REG_TCM_STORM1_IFEN 0x50008
4581 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
4582 disregarded; valid is deasserted; all other signals are treated as usual;
4583 if 1 - normal activity. */
4584 #define TCM_REG_TCM_TQM_IFEN 0x5000c
4585 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
4586 #define TCM_REG_TCM_TQM_USE_Q 0x500d4
4587 /* [RW 28] The CM header for Timers expiration command. */
4588 #define TCM_REG_TM_TCM_HDR 0x50098
4589 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
4590 disregarded; acknowledge output is deasserted; all other signals are
4591 treated as usual; if 1 - normal activity. */
4592 #define TCM_REG_TM_TCM_IFEN 0x5001c
4593 /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
4594 weight 8 (the most prioritised); 1 stands for weight 1(least
4595 prioritised); 2 stands for weight 2; tc. */
4596 #define TCM_REG_TM_WEIGHT 0x500d0
4597 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
4598 the initial credit value; read returns the current value of the credit
4599 counter. Must be initialized to 32 at start-up. */
4600 #define TCM_REG_TQM_INIT_CRD 0x5021c
4601 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
4602 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4603 prioritised); 2 stands for weight 2; tc. */
4604 #define TCM_REG_TQM_P_WEIGHT 0x500c8
4605 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
4606 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4607 prioritised); 2 stands for weight 2; tc. */
4608 #define TCM_REG_TQM_S_WEIGHT 0x500cc
4609 /* [RW 28] The CM header value for QM request (primary). */
4610 #define TCM_REG_TQM_TCM_HDR_P 0x50090
4611 /* [RW 28] The CM header value for QM request (secondary). */
4612 #define TCM_REG_TQM_TCM_HDR_S 0x50094
4613 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
4614 acknowledge output is deasserted; all other signals are treated as usual;
4615 if 1 - normal activity. */
4616 #define TCM_REG_TQM_TCM_IFEN 0x50014
4617 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
4618 acknowledge output is deasserted; all other signals are treated as usual;
4619 if 1 - normal activity. */
4620 #define TCM_REG_TSDM_IFEN 0x50018
4621 /* [RC 1] Message length mismatch (relative to last indication) at the SDM
4622 interface. */
4623 #define TCM_REG_TSDM_LENGTH_MIS 0x50164
4624 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
4625 weight 8 (the most prioritised); 1 stands for weight 1(least
4626 prioritised); 2 stands for weight 2; tc. */
4627 #define TCM_REG_TSDM_WEIGHT 0x500c4
4628 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
4629 disregarded; acknowledge output is deasserted; all other signals are
4630 treated as usual; if 1 - normal activity. */
4631 #define TCM_REG_USEM_IFEN 0x50028
4632 /* [RC 1] Message length mismatch (relative to last indication) at the In#8
4633 interface. */
4634 #define TCM_REG_USEM_LENGTH_MIS 0x50170
4635 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
4636 weight 8 (the most prioritised); 1 stands for weight 1(least
4637 prioritised); 2 stands for weight 2; tc. */
4638 #define TCM_REG_USEM_WEIGHT 0x500b8
4639 /* [RW 21] Indirect access to the descriptor table of the XX protection
4640 mechanism. The fields are: [5:0] - length of the message; 15:6] - message
4641 pointer; 20:16] - next pointer. */
4642 #define TCM_REG_XX_DESCR_TABLE 0x50280
4643 #define TCM_REG_XX_DESCR_TABLE_SIZE 29
4644 /* [R 6] Use to read the value of XX protection Free counter. */
4645 #define TCM_REG_XX_FREE 0x50178
4646 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
4647 of the Input Stage XX protection buffer by the XX protection pending
4648 messages. Max credit available - 127.Write writes the initial credit
4649 value; read returns the current value of the credit counter. Must be
4650 initialized to 19 at start-up. */
4651 #define TCM_REG_XX_INIT_CRD 0x50220
4652 /* [RW 6] Maximum link list size (messages locked) per connection in the XX
4653 protection. */
4654 #define TCM_REG_XX_MAX_LL_SZ 0x50044
4655 /* [RW 6] The maximum number of pending messages; which may be stored in XX
4656 protection. ~tcm_registers_xx_free.xx_free is read on read. */
4657 #define TCM_REG_XX_MSG_NUM 0x50224
4658 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
4659 #define TCM_REG_XX_OVFL_EVNT_ID 0x50048
4660 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
4661 The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
4662 header pointer. */
4663 #define TCM_REG_XX_TABLE 0x50240
4664 /* [RW 4] Load value for cfc ac credit cnt. */
4665 #define TM_REG_CFC_AC_CRDCNT_VAL 0x164208
4666 /* [RW 4] Load value for cfc cld credit cnt. */
4667 #define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210
4668 /* [RW 8] Client0 context region. */
4669 #define TM_REG_CL0_CONT_REGION 0x164030
4670 /* [RW 8] Client1 context region. */
4671 #define TM_REG_CL1_CONT_REGION 0x164034
4672 /* [RW 8] Client2 context region. */
4673 #define TM_REG_CL2_CONT_REGION 0x164038
4674 /* [RW 2] Client in High priority client number. */
4675 #define TM_REG_CLIN_PRIOR0_CLIENT 0x164024
4676 /* [RW 4] Load value for clout0 cred cnt. */
4677 #define TM_REG_CLOUT_CRDCNT0_VAL 0x164220
4678 /* [RW 4] Load value for clout1 cred cnt. */
4679 #define TM_REG_CLOUT_CRDCNT1_VAL 0x164228
4680 /* [RW 4] Load value for clout2 cred cnt. */
4681 #define TM_REG_CLOUT_CRDCNT2_VAL 0x164230
4682 /* [RW 1] Enable client0 input. */
4683 #define TM_REG_EN_CL0_INPUT 0x164008
4684 /* [RW 1] Enable client1 input. */
4685 #define TM_REG_EN_CL1_INPUT 0x16400c
4686 /* [RW 1] Enable client2 input. */
4687 #define TM_REG_EN_CL2_INPUT 0x164010
4688 #define TM_REG_EN_LINEAR0_TIMER 0x164014
4689 /* [RW 1] Enable real time counter. */
4690 #define TM_REG_EN_REAL_TIME_CNT 0x1640d8
4691 /* [RW 1] Enable for Timers state machines. */
4692 #define TM_REG_EN_TIMERS 0x164000
4693 /* [RW 4] Load value for expiration credit cnt. CFC max number of
4694 outstanding load requests for timers (expiration) context loading. */
4695 #define TM_REG_EXP_CRDCNT_VAL 0x164238
4696 /* [RW 32] Linear0 logic address. */
4697 #define TM_REG_LIN0_LOGIC_ADDR 0x164240
4698 /* [RW 18] Linear0 Max active cid (in banks of 32 entries). */
4699 #define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048
4700 /* [ST 16] Linear0 Number of scans counter. */
4701 #define TM_REG_LIN0_NUM_SCANS 0x1640a0
4702 /* [WB 64] Linear0 phy address. */
4703 #define TM_REG_LIN0_PHY_ADDR 0x164270
4704 /* [RW 1] Linear0 physical address valid. */
4705 #define TM_REG_LIN0_PHY_ADDR_VALID 0x164248
4706 #define TM_REG_LIN0_SCAN_ON 0x1640d0
4707 /* [RW 24] Linear0 array scan timeout. */
4708 #define TM_REG_LIN0_SCAN_TIME 0x16403c
4709 #define TM_REG_LIN0_VNIC_UC 0x164128
4710 /* [RW 32] Linear1 logic address. */
4711 #define TM_REG_LIN1_LOGIC_ADDR 0x164250
4712 /* [WB 64] Linear1 phy address. */
4713 #define TM_REG_LIN1_PHY_ADDR 0x164280
4714 /* [RW 1] Linear1 physical address valid. */
4715 #define TM_REG_LIN1_PHY_ADDR_VALID 0x164258
4716 /* [RW 6] Linear timer set_clear fifo threshold. */
4717 #define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070
4718 /* [RW 2] Load value for pci arbiter credit cnt. */
4719 #define TM_REG_PCIARB_CRDCNT_VAL 0x164260
4720 /* [RW 20] The amount of hardware cycles for each timer tick. */
4721 #define TM_REG_TIMER_TICK_SIZE 0x16401c
4722 /* [RW 8] Timers Context region. */
4723 #define TM_REG_TM_CONTEXT_REGION 0x164044
4724 /* [RW 1] Interrupt mask register #0 read/write */
4725 #define TM_REG_TM_INT_MASK 0x1640fc
4726 /* [R 1] Interrupt register #0 read */
4727 #define TM_REG_TM_INT_STS 0x1640f0
4728 /* [RW 7] Parity mask register #0 read/write */
4729 #define TM_REG_TM_PRTY_MASK 0x16410c
4730 /* [R 7] Parity register #0 read */
4731 #define TM_REG_TM_PRTY_STS 0x164100
4732 /* [RC 7] Parity register #0 read clear */
4733 #define TM_REG_TM_PRTY_STS_CLR 0x164104
4734 /* [RW 8] The event id for aggregated interrupt 0 */
4735 #define TSDM_REG_AGG_INT_EVENT_0 0x42038
4736 #define TSDM_REG_AGG_INT_EVENT_1 0x4203c
4737 #define TSDM_REG_AGG_INT_EVENT_2 0x42040
4738 #define TSDM_REG_AGG_INT_EVENT_3 0x42044
4739 #define TSDM_REG_AGG_INT_EVENT_4 0x42048
4740 /* [RW 1] The T bit for aggregated interrupt 0 */
4741 #define TSDM_REG_AGG_INT_T_0 0x420b8
4742 #define TSDM_REG_AGG_INT_T_1 0x420bc
4743 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
4744 #define TSDM_REG_CFC_RSP_START_ADDR 0x42008
4745 /* [RW 16] The maximum value of the completion counter #0 */
4746 #define TSDM_REG_CMP_COUNTER_MAX0 0x4201c
4747 /* [RW 16] The maximum value of the completion counter #1 */
4748 #define TSDM_REG_CMP_COUNTER_MAX1 0x42020
4749 /* [RW 16] The maximum value of the completion counter #2 */
4750 #define TSDM_REG_CMP_COUNTER_MAX2 0x42024
4751 /* [RW 16] The maximum value of the completion counter #3 */
4752 #define TSDM_REG_CMP_COUNTER_MAX3 0x42028
4753 /* [RW 13] The start address in the internal RAM for the completion
4754 counters. */
4755 #define TSDM_REG_CMP_COUNTER_START_ADDR 0x4200c
4756 #define TSDM_REG_ENABLE_IN1 0x42238
4757 #define TSDM_REG_ENABLE_IN2 0x4223c
4758 #define TSDM_REG_ENABLE_OUT1 0x42240
4759 #define TSDM_REG_ENABLE_OUT2 0x42244
4760 /* [RW 4] The initial number of messages that can be sent to the pxp control
4761 interface without receiving any ACK. */
4762 #define TSDM_REG_INIT_CREDIT_PXP_CTRL 0x424bc
4763 /* [ST 32] The number of ACK after placement messages received */
4764 #define TSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x4227c
4765 /* [ST 32] The number of packet end messages received from the parser */
4766 #define TSDM_REG_NUM_OF_PKT_END_MSG 0x42274
4767 /* [ST 32] The number of requests received from the pxp async if */
4768 #define TSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x42278
4769 /* [ST 32] The number of commands received in queue 0 */
4770 #define TSDM_REG_NUM_OF_Q0_CMD 0x42248
4771 /* [ST 32] The number of commands received in queue 10 */
4772 #define TSDM_REG_NUM_OF_Q10_CMD 0x4226c
4773 /* [ST 32] The number of commands received in queue 11 */
4774 #define TSDM_REG_NUM_OF_Q11_CMD 0x42270
4775 /* [ST 32] The number of commands received in queue 1 */
4776 #define TSDM_REG_NUM_OF_Q1_CMD 0x4224c
4777 /* [ST 32] The number of commands received in queue 3 */
4778 #define TSDM_REG_NUM_OF_Q3_CMD 0x42250
4779 /* [ST 32] The number of commands received in queue 4 */
4780 #define TSDM_REG_NUM_OF_Q4_CMD 0x42254
4781 /* [ST 32] The number of commands received in queue 5 */
4782 #define TSDM_REG_NUM_OF_Q5_CMD 0x42258
4783 /* [ST 32] The number of commands received in queue 6 */
4784 #define TSDM_REG_NUM_OF_Q6_CMD 0x4225c
4785 /* [ST 32] The number of commands received in queue 7 */
4786 #define TSDM_REG_NUM_OF_Q7_CMD 0x42260
4787 /* [ST 32] The number of commands received in queue 8 */
4788 #define TSDM_REG_NUM_OF_Q8_CMD 0x42264
4789 /* [ST 32] The number of commands received in queue 9 */
4790 #define TSDM_REG_NUM_OF_Q9_CMD 0x42268
4791 /* [RW 13] The start address in the internal RAM for the packet end message */
4792 #define TSDM_REG_PCK_END_MSG_START_ADDR 0x42014
4793 /* [RW 13] The start address in the internal RAM for queue counters */
4794 #define TSDM_REG_Q_COUNTER_START_ADDR 0x42010
4795 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
4796 #define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x42548
4797 /* [R 1] parser fifo empty in sdm_sync block */
4798 #define TSDM_REG_SYNC_PARSER_EMPTY 0x42550
4799 /* [R 1] parser serial fifo empty in sdm_sync block */
4800 #define TSDM_REG_SYNC_SYNC_EMPTY 0x42558
4801 /* [RW 32] Tick for timer counter. Applicable only when
4802 ~tsdm_registers_timer_tick_enable.timer_tick_enable =1 */
4803 #define TSDM_REG_TIMER_TICK 0x42000
4804 /* [RW 32] Interrupt mask register #0 read/write */
4805 #define TSDM_REG_TSDM_INT_MASK_0 0x4229c
4806 #define TSDM_REG_TSDM_INT_MASK_1 0x422ac
4807 /* [R 32] Interrupt register #0 read */
4808 #define TSDM_REG_TSDM_INT_STS_0 0x42290
4809 #define TSDM_REG_TSDM_INT_STS_1 0x422a0
4810 /* [RW 11] Parity mask register #0 read/write */
4811 #define TSDM_REG_TSDM_PRTY_MASK 0x422bc
4812 /* [R 11] Parity register #0 read */
4813 #define TSDM_REG_TSDM_PRTY_STS 0x422b0
4814 /* [RC 11] Parity register #0 read clear */
4815 #define TSDM_REG_TSDM_PRTY_STS_CLR 0x422b4
4816 /* [RW 5] The number of time_slots in the arbitration cycle */
4817 #define TSEM_REG_ARB_CYCLE_SIZE 0x180034
4818 /* [RW 3] The source that is associated with arbitration element 0. Source
4819 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4820 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
4821 #define TSEM_REG_ARB_ELEMENT0 0x180020
4822 /* [RW 3] The source that is associated with arbitration element 1. Source
4823 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4824 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4825 Could not be equal to register ~tsem_registers_arb_element0.arb_element0 */
4826 #define TSEM_REG_ARB_ELEMENT1 0x180024
4827 /* [RW 3] The source that is associated with arbitration element 2. Source
4828 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4829 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4830 Could not be equal to register ~tsem_registers_arb_element0.arb_element0
4831 and ~tsem_registers_arb_element1.arb_element1 */
4832 #define TSEM_REG_ARB_ELEMENT2 0x180028
4833 /* [RW 3] The source that is associated with arbitration element 3. Source
4834 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4835 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
4836 not be equal to register ~tsem_registers_arb_element0.arb_element0 and
4837 ~tsem_registers_arb_element1.arb_element1 and
4838 ~tsem_registers_arb_element2.arb_element2 */
4839 #define TSEM_REG_ARB_ELEMENT3 0x18002c
4840 /* [RW 3] The source that is associated with arbitration element 4. Source
4841 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4842 sleeping thread with priority 1; 4- sleeping thread with priority 2.
4843 Could not be equal to register ~tsem_registers_arb_element0.arb_element0
4844 and ~tsem_registers_arb_element1.arb_element1 and
4845 ~tsem_registers_arb_element2.arb_element2 and
4846 ~tsem_registers_arb_element3.arb_element3 */
4847 #define TSEM_REG_ARB_ELEMENT4 0x180030
4848 #define TSEM_REG_ENABLE_IN 0x1800a4
4849 #define TSEM_REG_ENABLE_OUT 0x1800a8
4850 /* [RW 32] This address space contains all registers and memories that are
4851 placed in SEM_FAST block. The SEM_FAST registers are described in
4852 appendix B. In order to access the sem_fast registers the base address
4853 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
4854 #define TSEM_REG_FAST_MEMORY 0x1a0000
4855 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
4856 by the microcode */
4857 #define TSEM_REG_FIC0_DISABLE 0x180224
4858 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
4859 by the microcode */
4860 #define TSEM_REG_FIC1_DISABLE 0x180234
4861 /* [RW 15] Interrupt table Read and write access to it is not possible in
4862 the middle of the work */
4863 #define TSEM_REG_INT_TABLE 0x180400
4864 /* [ST 24] Statistics register. The number of messages that entered through
4865 FIC0 */
4866 #define TSEM_REG_MSG_NUM_FIC0 0x180000
4867 /* [ST 24] Statistics register. The number of messages that entered through
4868 FIC1 */
4869 #define TSEM_REG_MSG_NUM_FIC1 0x180004
4870 /* [ST 24] Statistics register. The number of messages that were sent to
4871 FOC0 */
4872 #define TSEM_REG_MSG_NUM_FOC0 0x180008
4873 /* [ST 24] Statistics register. The number of messages that were sent to
4874 FOC1 */
4875 #define TSEM_REG_MSG_NUM_FOC1 0x18000c
4876 /* [ST 24] Statistics register. The number of messages that were sent to
4877 FOC2 */
4878 #define TSEM_REG_MSG_NUM_FOC2 0x180010
4879 /* [ST 24] Statistics register. The number of messages that were sent to
4880 FOC3 */
4881 #define TSEM_REG_MSG_NUM_FOC3 0x180014
4882 /* [RW 1] Disables input messages from the passive buffer May be updated
4883 during run_time by the microcode */
4884 #define TSEM_REG_PAS_DISABLE 0x18024c
4885 /* [WB 128] Debug only. Passive buffer memory */
4886 #define TSEM_REG_PASSIVE_BUFFER 0x181000
4887 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
4888 #define TSEM_REG_PRAM 0x1c0000
4889 /* [R 8] Valid sleeping threads indication have bit per thread */
4890 #define TSEM_REG_SLEEP_THREADS_VALID 0x18026c
4891 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
4892 #define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0
4893 /* [RW 8] List of free threads . There is a bit per thread. */
4894 #define TSEM_REG_THREADS_LIST 0x1802e4
4895 /* [RC 32] Parity register #0 read clear */
4896 #define TSEM_REG_TSEM_PRTY_STS_CLR_0 0x180118
4897 #define TSEM_REG_TSEM_PRTY_STS_CLR_1 0x180128
4898 /* [RW 3] The arbitration scheme of time_slot 0 */
4899 #define TSEM_REG_TS_0_AS 0x180038
4900 /* [RW 3] The arbitration scheme of time_slot 10 */
4901 #define TSEM_REG_TS_10_AS 0x180060
4902 /* [RW 3] The arbitration scheme of time_slot 11 */
4903 #define TSEM_REG_TS_11_AS 0x180064
4904 /* [RW 3] The arbitration scheme of time_slot 12 */
4905 #define TSEM_REG_TS_12_AS 0x180068
4906 /* [RW 3] The arbitration scheme of time_slot 13 */
4907 #define TSEM_REG_TS_13_AS 0x18006c
4908 /* [RW 3] The arbitration scheme of time_slot 14 */
4909 #define TSEM_REG_TS_14_AS 0x180070
4910 /* [RW 3] The arbitration scheme of time_slot 15 */
4911 #define TSEM_REG_TS_15_AS 0x180074
4912 /* [RW 3] The arbitration scheme of time_slot 16 */
4913 #define TSEM_REG_TS_16_AS 0x180078
4914 /* [RW 3] The arbitration scheme of time_slot 17 */
4915 #define TSEM_REG_TS_17_AS 0x18007c
4916 /* [RW 3] The arbitration scheme of time_slot 18 */
4917 #define TSEM_REG_TS_18_AS 0x180080
4918 /* [RW 3] The arbitration scheme of time_slot 1 */
4919 #define TSEM_REG_TS_1_AS 0x18003c
4920 /* [RW 3] The arbitration scheme of time_slot 2 */
4921 #define TSEM_REG_TS_2_AS 0x180040
4922 /* [RW 3] The arbitration scheme of time_slot 3 */
4923 #define TSEM_REG_TS_3_AS 0x180044
4924 /* [RW 3] The arbitration scheme of time_slot 4 */
4925 #define TSEM_REG_TS_4_AS 0x180048
4926 /* [RW 3] The arbitration scheme of time_slot 5 */
4927 #define TSEM_REG_TS_5_AS 0x18004c
4928 /* [RW 3] The arbitration scheme of time_slot 6 */
4929 #define TSEM_REG_TS_6_AS 0x180050
4930 /* [RW 3] The arbitration scheme of time_slot 7 */
4931 #define TSEM_REG_TS_7_AS 0x180054
4932 /* [RW 3] The arbitration scheme of time_slot 8 */
4933 #define TSEM_REG_TS_8_AS 0x180058
4934 /* [RW 3] The arbitration scheme of time_slot 9 */
4935 #define TSEM_REG_TS_9_AS 0x18005c
4936 /* [RW 32] Interrupt mask register #0 read/write */
4937 #define TSEM_REG_TSEM_INT_MASK_0 0x180100
4938 #define TSEM_REG_TSEM_INT_MASK_1 0x180110
4939 /* [R 32] Interrupt register #0 read */
4940 #define TSEM_REG_TSEM_INT_STS_0 0x1800f4
4941 #define TSEM_REG_TSEM_INT_STS_1 0x180104
4942 /* [RW 32] Parity mask register #0 read/write */
4943 #define TSEM_REG_TSEM_PRTY_MASK_0 0x180120
4944 #define TSEM_REG_TSEM_PRTY_MASK_1 0x180130
4945 /* [R 32] Parity register #0 read */
4946 #define TSEM_REG_TSEM_PRTY_STS_0 0x180114
4947 #define TSEM_REG_TSEM_PRTY_STS_1 0x180124
4948 /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
4949 * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
4950 #define TSEM_REG_VFPF_ERR_NUM 0x180380
4951 /* [RW 32] Indirect access to AG context with 32-bits granularity. The bits
4952 * [10:8] of the address should be the offset within the accessed LCID
4953 * context; the bits [7:0] are the accessed LCID.Example: to write to REG10
4954 * LCID100. The RBC address should be 12'ha64. */
4955 #define UCM_REG_AG_CTX 0xe2000
4956 /* [R 5] Used to read the XX protection CAM occupancy counter. */
4957 #define UCM_REG_CAM_OCCUP 0xe0170
4958 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
4959 disregarded; valid output is deasserted; all other signals are treated as
4960 usual; if 1 - normal activity. */
4961 #define UCM_REG_CDU_AG_RD_IFEN 0xe0038
4962 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
4963 are disregarded; all other signals are treated as usual; if 1 - normal
4964 activity. */
4965 #define UCM_REG_CDU_AG_WR_IFEN 0xe0034
4966 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
4967 disregarded; valid output is deasserted; all other signals are treated as
4968 usual; if 1 - normal activity. */
4969 #define UCM_REG_CDU_SM_RD_IFEN 0xe0040
4970 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
4971 input is disregarded; all other signals are treated as usual; if 1 -
4972 normal activity. */
4973 #define UCM_REG_CDU_SM_WR_IFEN 0xe003c
4974 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
4975 the initial credit value; read returns the current value of the credit
4976 counter. Must be initialized to 1 at start-up. */
4977 #define UCM_REG_CFC_INIT_CRD 0xe0204
4978 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
4979 weight 8 (the most prioritised); 1 stands for weight 1(least
4980 prioritised); 2 stands for weight 2; tc. */
4981 #define UCM_REG_CP_WEIGHT 0xe00c4
4982 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
4983 disregarded; acknowledge output is deasserted; all other signals are
4984 treated as usual; if 1 - normal activity. */
4985 #define UCM_REG_CSEM_IFEN 0xe0028
4986 /* [RC 1] Set when the message length mismatch (relative to last indication)
4987 at the csem interface is detected. */
4988 #define UCM_REG_CSEM_LENGTH_MIS 0xe0160
4989 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
4990 weight 8 (the most prioritised); 1 stands for weight 1(least
4991 prioritised); 2 stands for weight 2; tc. */
4992 #define UCM_REG_CSEM_WEIGHT 0xe00b8
4993 /* [RW 1] Input dorq Interface enable. If 0 - the valid input is
4994 disregarded; acknowledge output is deasserted; all other signals are
4995 treated as usual; if 1 - normal activity. */
4996 #define UCM_REG_DORQ_IFEN 0xe0030
4997 /* [RC 1] Set when the message length mismatch (relative to last indication)
4998 at the dorq interface is detected. */
4999 #define UCM_REG_DORQ_LENGTH_MIS 0xe0168
5000 /* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for
5001 weight 8 (the most prioritised); 1 stands for weight 1(least
5002 prioritised); 2 stands for weight 2; tc. */
5003 #define UCM_REG_DORQ_WEIGHT 0xe00c0
5004 /* [RW 8] The Event ID in case ErrorFlg input message bit is set. */
5005 #define UCM_REG_ERR_EVNT_ID 0xe00a4
5006 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
5007 #define UCM_REG_ERR_UCM_HDR 0xe00a0
5008 /* [RW 8] The Event ID for Timers expiration. */
5009 #define UCM_REG_EXPR_EVNT_ID 0xe00a8
5010 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
5011 writes the initial credit value; read returns the current value of the
5012 credit counter. Must be initialized to 64 at start-up. */
5013 #define UCM_REG_FIC0_INIT_CRD 0xe020c
5014 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
5015 writes the initial credit value; read returns the current value of the
5016 credit counter. Must be initialized to 64 at start-up. */
5017 #define UCM_REG_FIC1_INIT_CRD 0xe0210
5018 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
5019 - strict priority defined by ~ucm_registers_gr_ag_pr.gr_ag_pr;
5020 ~ucm_registers_gr_ld0_pr.gr_ld0_pr and
5021 ~ucm_registers_gr_ld1_pr.gr_ld1_pr. */
5022 #define UCM_REG_GR_ARB_TYPE 0xe0144
5023 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
5024 highest priority is 3. It is supposed that the Store channel group is
5025 complement to the others. */
5026 #define UCM_REG_GR_LD0_PR 0xe014c
5027 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
5028 highest priority is 3. It is supposed that the Store channel group is
5029 complement to the others. */
5030 #define UCM_REG_GR_LD1_PR 0xe0150
5031 /* [RW 2] The queue index for invalidate counter flag decision. */
5032 #define UCM_REG_INV_CFLG_Q 0xe00e4
5033 /* [RW 5] The number of double REG-pairs; loaded from the STORM context and
5034 sent to STORM; for a specific connection type. the double REG-pairs are
5035 used in order to align to STORM context row size of 128 bits. The offset
5036 of these data in the STORM context is always 0. Index _i stands for the
5037 connection type (one of 16). */
5038 #define UCM_REG_N_SM_CTX_LD_0 0xe0054
5039 #define UCM_REG_N_SM_CTX_LD_1 0xe0058
5040 #define UCM_REG_N_SM_CTX_LD_2 0xe005c
5041 #define UCM_REG_N_SM_CTX_LD_3 0xe0060
5042 #define UCM_REG_N_SM_CTX_LD_4 0xe0064
5043 #define UCM_REG_N_SM_CTX_LD_5 0xe0068
5044 #define UCM_REG_PHYS_QNUM0_0 0xe0110
5045 #define UCM_REG_PHYS_QNUM0_1 0xe0114
5046 #define UCM_REG_PHYS_QNUM1_0 0xe0118
5047 #define UCM_REG_PHYS_QNUM1_1 0xe011c
5048 #define UCM_REG_PHYS_QNUM2_0 0xe0120
5049 #define UCM_REG_PHYS_QNUM2_1 0xe0124
5050 #define UCM_REG_PHYS_QNUM3_0 0xe0128
5051 #define UCM_REG_PHYS_QNUM3_1 0xe012c
5052 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
5053 #define UCM_REG_STOP_EVNT_ID 0xe00ac
5054 /* [RC 1] Set when the message length mismatch (relative to last indication)
5055 at the STORM interface is detected. */
5056 #define UCM_REG_STORM_LENGTH_MIS 0xe0154
5057 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
5058 disregarded; acknowledge output is deasserted; all other signals are
5059 treated as usual; if 1 - normal activity. */
5060 #define UCM_REG_STORM_UCM_IFEN 0xe0010
5061 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
5062 weight 8 (the most prioritised); 1 stands for weight 1(least
5063 prioritised); 2 stands for weight 2; tc. */
5064 #define UCM_REG_STORM_WEIGHT 0xe00b0
5065 /* [RW 4] Timers output initial credit. Max credit available - 15.Write
5066 writes the initial credit value; read returns the current value of the
5067 credit counter. Must be initialized to 4 at start-up. */
5068 #define UCM_REG_TM_INIT_CRD 0xe021c
5069 /* [RW 28] The CM header for Timers expiration command. */
5070 #define UCM_REG_TM_UCM_HDR 0xe009c
5071 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
5072 disregarded; acknowledge output is deasserted; all other signals are
5073 treated as usual; if 1 - normal activity. */
5074 #define UCM_REG_TM_UCM_IFEN 0xe001c
5075 /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
5076 weight 8 (the most prioritised); 1 stands for weight 1(least
5077 prioritised); 2 stands for weight 2; tc. */
5078 #define UCM_REG_TM_WEIGHT 0xe00d4
5079 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
5080 disregarded; acknowledge output is deasserted; all other signals are
5081 treated as usual; if 1 - normal activity. */
5082 #define UCM_REG_TSEM_IFEN 0xe0024
5083 /* [RC 1] Set when the message length mismatch (relative to last indication)
5084 at the tsem interface is detected. */
5085 #define UCM_REG_TSEM_LENGTH_MIS 0xe015c
5086 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
5087 weight 8 (the most prioritised); 1 stands for weight 1(least
5088 prioritised); 2 stands for weight 2; tc. */
5089 #define UCM_REG_TSEM_WEIGHT 0xe00b4
5090 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
5091 acknowledge output is deasserted; all other signals are treated as usual;
5092 if 1 - normal activity. */
5093 #define UCM_REG_UCM_CFC_IFEN 0xe0044
5094 /* [RW 11] Interrupt mask register #0 read/write */
5095 #define UCM_REG_UCM_INT_MASK 0xe01d4
5096 /* [R 11] Interrupt register #0 read */
5097 #define UCM_REG_UCM_INT_STS 0xe01c8
5098 /* [RW 27] Parity mask register #0 read/write */
5099 #define UCM_REG_UCM_PRTY_MASK 0xe01e4
5100 /* [R 27] Parity register #0 read */
5101 #define UCM_REG_UCM_PRTY_STS 0xe01d8
5102 /* [RC 27] Parity register #0 read clear */
5103 #define UCM_REG_UCM_PRTY_STS_CLR 0xe01dc
5104 /* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS
5105 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
5106 Is used to determine the number of the AG context REG-pairs written back;
5107 when the Reg1WbFlg isn't set. */
5108 #define UCM_REG_UCM_REG0_SZ 0xe00dc
5109 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
5110 disregarded; valid is deasserted; all other signals are treated as usual;
5111 if 1 - normal activity. */
5112 #define UCM_REG_UCM_STORM0_IFEN 0xe0004
5113 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
5114 disregarded; valid is deasserted; all other signals are treated as usual;
5115 if 1 - normal activity. */
5116 #define UCM_REG_UCM_STORM1_IFEN 0xe0008
5117 /* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
5118 disregarded; acknowledge output is deasserted; all other signals are
5119 treated as usual; if 1 - normal activity. */
5120 #define UCM_REG_UCM_TM_IFEN 0xe0020
5121 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
5122 disregarded; valid is deasserted; all other signals are treated as usual;
5123 if 1 - normal activity. */
5124 #define UCM_REG_UCM_UQM_IFEN 0xe000c
5125 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
5126 #define UCM_REG_UCM_UQM_USE_Q 0xe00d8
5127 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
5128 the initial credit value; read returns the current value of the credit
5129 counter. Must be initialized to 32 at start-up. */
5130 #define UCM_REG_UQM_INIT_CRD 0xe0220
5131 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
5132 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
5133 prioritised); 2 stands for weight 2; tc. */
5134 #define UCM_REG_UQM_P_WEIGHT 0xe00cc
5135 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
5136 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
5137 prioritised); 2 stands for weight 2; tc. */
5138 #define UCM_REG_UQM_S_WEIGHT 0xe00d0
5139 /* [RW 28] The CM header value for QM request (primary). */
5140 #define UCM_REG_UQM_UCM_HDR_P 0xe0094
5141 /* [RW 28] The CM header value for QM request (secondary). */
5142 #define UCM_REG_UQM_UCM_HDR_S 0xe0098
5143 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
5144 acknowledge output is deasserted; all other signals are treated as usual;
5145 if 1 - normal activity. */
5146 #define UCM_REG_UQM_UCM_IFEN 0xe0014
5147 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
5148 acknowledge output is deasserted; all other signals are treated as usual;
5149 if 1 - normal activity. */
5150 #define UCM_REG_USDM_IFEN 0xe0018
5151 /* [RC 1] Set when the message length mismatch (relative to last indication)
5152 at the SDM interface is detected. */
5153 #define UCM_REG_USDM_LENGTH_MIS 0xe0158
5154 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
5155 weight 8 (the most prioritised); 1 stands for weight 1(least
5156 prioritised); 2 stands for weight 2; tc. */
5157 #define UCM_REG_USDM_WEIGHT 0xe00c8
5158 /* [RW 1] Input xsem Interface enable. If 0 - the valid input is
5159 disregarded; acknowledge output is deasserted; all other signals are
5160 treated as usual; if 1 - normal activity. */
5161 #define UCM_REG_XSEM_IFEN 0xe002c
5162 /* [RC 1] Set when the message length mismatch (relative to last indication)
5163 at the xsem interface isdetected. */
5164 #define UCM_REG_XSEM_LENGTH_MIS 0xe0164
5165 /* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
5166 weight 8 (the most prioritised); 1 stands for weight 1(least
5167 prioritised); 2 stands for weight 2; tc. */
5168 #define UCM_REG_XSEM_WEIGHT 0xe00bc
5169 /* [RW 20] Indirect access to the descriptor table of the XX protection
5170 mechanism. The fields are:[5:0] - message length; 14:6] - message
5171 pointer; 19:15] - next pointer. */
5172 #define UCM_REG_XX_DESCR_TABLE 0xe0280
5173 #define UCM_REG_XX_DESCR_TABLE_SIZE 27
5174 /* [R 6] Use to read the XX protection Free counter. */
5175 #define UCM_REG_XX_FREE 0xe016c
5176 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
5177 of the Input Stage XX protection buffer by the XX protection pending
5178 messages. Write writes the initial credit value; read returns the current
5179 value of the credit counter. Must be initialized to 12 at start-up. */
5180 #define UCM_REG_XX_INIT_CRD 0xe0224
5181 /* [RW 6] The maximum number of pending messages; which may be stored in XX
5182 protection. ~ucm_registers_xx_free.xx_free read on read. */
5183 #define UCM_REG_XX_MSG_NUM 0xe0228
5184 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
5185 #define UCM_REG_XX_OVFL_EVNT_ID 0xe004c
5186 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
5187 The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] -
5188 header pointer. */
5189 #define UCM_REG_XX_TABLE 0xe0300
5190 #define UMAC_COMMAND_CONFIG_REG_HD_ENA (0x1<<10)
5191 #define UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE (0x1<<28)
5192 #define UMAC_COMMAND_CONFIG_REG_LOOP_ENA (0x1<<15)
5193 #define UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK (0x1<<24)
5194 #define UMAC_COMMAND_CONFIG_REG_PAD_EN (0x1<<5)
5195 #define UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE (0x1<<8)
5196 #define UMAC_COMMAND_CONFIG_REG_PROMIS_EN (0x1<<4)
5197 #define UMAC_COMMAND_CONFIG_REG_RX_ENA (0x1<<1)
5198 #define UMAC_COMMAND_CONFIG_REG_SW_RESET (0x1<<13)
5199 #define UMAC_COMMAND_CONFIG_REG_TX_ENA (0x1<<0)
5200 #define UMAC_REG_COMMAND_CONFIG 0x8
5201 /* [RW 16] This is the duration for which MAC must wait to go back to ACTIVE
5202 * state from LPI state when it receives packet for transmission. The
5203 * decrement unit is 1 micro-second. */
5204 #define UMAC_REG_EEE_WAKE_TIMER 0x6c
5205 /* [RW 32] Register Bit 0 refers to Bit 16 of the MAC address; Bit 1 refers
5206 * to bit 17 of the MAC address etc. */
5207 #define UMAC_REG_MAC_ADDR0 0xc
5208 /* [RW 16] Register Bit 0 refers to Bit 0 of the MAC address; Register Bit 1
5209 * refers to Bit 1 of the MAC address etc. Bits 16 to 31 are reserved. */
5210 #define UMAC_REG_MAC_ADDR1 0x10
5211 /* [RW 14] Defines a 14-Bit maximum frame length used by the MAC receive
5212 * logic to check frames. */
5213 #define UMAC_REG_MAXFR 0x14
5214 #define UMAC_REG_UMAC_EEE_CTRL 0x64
5215 #define UMAC_UMAC_EEE_CTRL_REG_EEE_EN (0x1<<3)
5216 /* [RW 8] The event id for aggregated interrupt 0 */
5217 #define USDM_REG_AGG_INT_EVENT_0 0xc4038
5218 #define USDM_REG_AGG_INT_EVENT_1 0xc403c
5219 #define USDM_REG_AGG_INT_EVENT_2 0xc4040
5220 #define USDM_REG_AGG_INT_EVENT_4 0xc4048
5221 #define USDM_REG_AGG_INT_EVENT_5 0xc404c
5222 #define USDM_REG_AGG_INT_EVENT_6 0xc4050
5223 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
5224 or auto-mask-mode (1) */
5225 #define USDM_REG_AGG_INT_MODE_0 0xc41b8
5226 #define USDM_REG_AGG_INT_MODE_1 0xc41bc
5227 #define USDM_REG_AGG_INT_MODE_4 0xc41c8
5228 #define USDM_REG_AGG_INT_MODE_5 0xc41cc
5229 #define USDM_REG_AGG_INT_MODE_6 0xc41d0
5230 /* [RW 1] The T bit for aggregated interrupt 5 */
5231 #define USDM_REG_AGG_INT_T_5 0xc40cc
5232 #define USDM_REG_AGG_INT_T_6 0xc40d0
5233 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
5234 #define USDM_REG_CFC_RSP_START_ADDR 0xc4008
5235 /* [RW 16] The maximum value of the completion counter #0 */
5236 #define USDM_REG_CMP_COUNTER_MAX0 0xc401c
5237 /* [RW 16] The maximum value of the completion counter #1 */
5238 #define USDM_REG_CMP_COUNTER_MAX1 0xc4020
5239 /* [RW 16] The maximum value of the completion counter #2 */
5240 #define USDM_REG_CMP_COUNTER_MAX2 0xc4024
5241 /* [RW 16] The maximum value of the completion counter #3 */
5242 #define USDM_REG_CMP_COUNTER_MAX3 0xc4028
5243 /* [RW 13] The start address in the internal RAM for the completion
5244 counters. */
5245 #define USDM_REG_CMP_COUNTER_START_ADDR 0xc400c
5246 #define USDM_REG_ENABLE_IN1 0xc4238
5247 #define USDM_REG_ENABLE_IN2 0xc423c
5248 #define USDM_REG_ENABLE_OUT1 0xc4240
5249 #define USDM_REG_ENABLE_OUT2 0xc4244
5250 /* [RW 4] The initial number of messages that can be sent to the pxp control
5251 interface without receiving any ACK. */
5252 #define USDM_REG_INIT_CREDIT_PXP_CTRL 0xc44c0
5253 /* [ST 32] The number of ACK after placement messages received */
5254 #define USDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc4280
5255 /* [ST 32] The number of packet end messages received from the parser */
5256 #define USDM_REG_NUM_OF_PKT_END_MSG 0xc4278
5257 /* [ST 32] The number of requests received from the pxp async if */
5258 #define USDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc427c
5259 /* [ST 32] The number of commands received in queue 0 */
5260 #define USDM_REG_NUM_OF_Q0_CMD 0xc4248
5261 /* [ST 32] The number of commands received in queue 10 */
5262 #define USDM_REG_NUM_OF_Q10_CMD 0xc4270
5263 /* [ST 32] The number of commands received in queue 11 */
5264 #define USDM_REG_NUM_OF_Q11_CMD 0xc4274
5265 /* [ST 32] The number of commands received in queue 1 */
5266 #define USDM_REG_NUM_OF_Q1_CMD 0xc424c
5267 /* [ST 32] The number of commands received in queue 2 */
5268 #define USDM_REG_NUM_OF_Q2_CMD 0xc4250
5269 /* [ST 32] The number of commands received in queue 3 */
5270 #define USDM_REG_NUM_OF_Q3_CMD 0xc4254
5271 /* [ST 32] The number of commands received in queue 4 */
5272 #define USDM_REG_NUM_OF_Q4_CMD 0xc4258
5273 /* [ST 32] The number of commands received in queue 5 */
5274 #define USDM_REG_NUM_OF_Q5_CMD 0xc425c
5275 /* [ST 32] The number of commands received in queue 6 */
5276 #define USDM_REG_NUM_OF_Q6_CMD 0xc4260
5277 /* [ST 32] The number of commands received in queue 7 */
5278 #define USDM_REG_NUM_OF_Q7_CMD 0xc4264
5279 /* [ST 32] The number of commands received in queue 8 */
5280 #define USDM_REG_NUM_OF_Q8_CMD 0xc4268
5281 /* [ST 32] The number of commands received in queue 9 */
5282 #define USDM_REG_NUM_OF_Q9_CMD 0xc426c
5283 /* [RW 13] The start address in the internal RAM for the packet end message */
5284 #define USDM_REG_PCK_END_MSG_START_ADDR 0xc4014
5285 /* [RW 13] The start address in the internal RAM for queue counters */
5286 #define USDM_REG_Q_COUNTER_START_ADDR 0xc4010
5287 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
5288 #define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc4550
5289 /* [R 1] parser fifo empty in sdm_sync block */
5290 #define USDM_REG_SYNC_PARSER_EMPTY 0xc4558
5291 /* [R 1] parser serial fifo empty in sdm_sync block */
5292 #define USDM_REG_SYNC_SYNC_EMPTY 0xc4560
5293 /* [RW 32] Tick for timer counter. Applicable only when
5294 ~usdm_registers_timer_tick_enable.timer_tick_enable =1 */
5295 #define USDM_REG_TIMER_TICK 0xc4000
5296 /* [RW 32] Interrupt mask register #0 read/write */
5297 #define USDM_REG_USDM_INT_MASK_0 0xc42a0
5298 #define USDM_REG_USDM_INT_MASK_1 0xc42b0
5299 /* [R 32] Interrupt register #0 read */
5300 #define USDM_REG_USDM_INT_STS_0 0xc4294
5301 #define USDM_REG_USDM_INT_STS_1 0xc42a4
5302 /* [RW 11] Parity mask register #0 read/write */
5303 #define USDM_REG_USDM_PRTY_MASK 0xc42c0
5304 /* [R 11] Parity register #0 read */
5305 #define USDM_REG_USDM_PRTY_STS 0xc42b4
5306 /* [RC 11] Parity register #0 read clear */
5307 #define USDM_REG_USDM_PRTY_STS_CLR 0xc42b8
5308 /* [RW 5] The number of time_slots in the arbitration cycle */
5309 #define USEM_REG_ARB_CYCLE_SIZE 0x300034
5310 /* [RW 3] The source that is associated with arbitration element 0. Source
5311 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
5312 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
5313 #define USEM_REG_ARB_ELEMENT0 0x300020
5314 /* [RW 3] The source that is associated with arbitration element 1. Source
5315 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
5316 sleeping thread with priority 1; 4- sleeping thread with priority 2.
5317 Could not be equal to register ~usem_registers_arb_element0.arb_element0 */
5318 #define USEM_REG_ARB_ELEMENT1 0x300024
5319 /* [RW 3] The source that is associated with arbitration element 2. Source
5320 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
5321 sleeping thread with priority 1; 4- sleeping thread with priority 2.
5322 Could not be equal to register ~usem_registers_arb_element0.arb_element0
5323 and ~usem_registers_arb_element1.arb_element1 */
5324 #define USEM_REG_ARB_ELEMENT2 0x300028
5325 /* [RW 3] The source that is associated with arbitration element 3. Source
5326 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
5327 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
5328 not be equal to register ~usem_registers_arb_element0.arb_element0 and
5329 ~usem_registers_arb_element1.arb_element1 and
5330 ~usem_registers_arb_element2.arb_element2 */
5331 #define USEM_REG_ARB_ELEMENT3 0x30002c
5332 /* [RW 3] The source that is associated with arbitration element 4. Source
5333 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
5334 sleeping thread with priority 1; 4- sleeping thread with priority 2.
5335 Could not be equal to register ~usem_registers_arb_element0.arb_element0
5336 and ~usem_registers_arb_element1.arb_element1 and
5337 ~usem_registers_arb_element2.arb_element2 and
5338 ~usem_registers_arb_element3.arb_element3 */
5339 #define USEM_REG_ARB_ELEMENT4 0x300030
5340 #define USEM_REG_ENABLE_IN 0x3000a4
5341 #define USEM_REG_ENABLE_OUT 0x3000a8
5342 /* [RW 32] This address space contains all registers and memories that are
5343 placed in SEM_FAST block. The SEM_FAST registers are described in
5344 appendix B. In order to access the sem_fast registers the base address
5345 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
5346 #define USEM_REG_FAST_MEMORY 0x320000
5347 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
5348 by the microcode */
5349 #define USEM_REG_FIC0_DISABLE 0x300224
5350 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
5351 by the microcode */
5352 #define USEM_REG_FIC1_DISABLE 0x300234
5353 /* [RW 15] Interrupt table Read and write access to it is not possible in
5354 the middle of the work */
5355 #define USEM_REG_INT_TABLE 0x300400
5356 /* [ST 24] Statistics register. The number of messages that entered through
5357 FIC0 */
5358 #define USEM_REG_MSG_NUM_FIC0 0x300000
5359 /* [ST 24] Statistics register. The number of messages that entered through
5360 FIC1 */
5361 #define USEM_REG_MSG_NUM_FIC1 0x300004
5362 /* [ST 24] Statistics register. The number of messages that were sent to
5363 FOC0 */
5364 #define USEM_REG_MSG_NUM_FOC0 0x300008
5365 /* [ST 24] Statistics register. The number of messages that were sent to
5366 FOC1 */
5367 #define USEM_REG_MSG_NUM_FOC1 0x30000c
5368 /* [ST 24] Statistics register. The number of messages that were sent to
5369 FOC2 */
5370 #define USEM_REG_MSG_NUM_FOC2 0x300010
5371 /* [ST 24] Statistics register. The number of messages that were sent to
5372 FOC3 */
5373 #define USEM_REG_MSG_NUM_FOC3 0x300014
5374 /* [RW 1] Disables input messages from the passive buffer May be updated
5375 during run_time by the microcode */
5376 #define USEM_REG_PAS_DISABLE 0x30024c
5377 /* [WB 128] Debug only. Passive buffer memory */
5378 #define USEM_REG_PASSIVE_BUFFER 0x302000
5379 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
5380 #define USEM_REG_PRAM 0x340000
5381 /* [R 16] Valid sleeping threads indication have bit per thread */
5382 #define USEM_REG_SLEEP_THREADS_VALID 0x30026c
5383 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
5384 #define USEM_REG_SLOW_EXT_STORE_EMPTY 0x3002a0
5385 /* [RW 16] List of free threads . There is a bit per thread. */
5386 #define USEM_REG_THREADS_LIST 0x3002e4
5387 /* [RW 3] The arbitration scheme of time_slot 0 */
5388 #define USEM_REG_TS_0_AS 0x300038
5389 /* [RW 3] The arbitration scheme of time_slot 10 */
5390 #define USEM_REG_TS_10_AS 0x300060
5391 /* [RW 3] The arbitration scheme of time_slot 11 */
5392 #define USEM_REG_TS_11_AS 0x300064
5393 /* [RW 3] The arbitration scheme of time_slot 12 */
5394 #define USEM_REG_TS_12_AS 0x300068
5395 /* [RW 3] The arbitration scheme of time_slot 13 */
5396 #define USEM_REG_TS_13_AS 0x30006c
5397 /* [RW 3] The arbitration scheme of time_slot 14 */
5398 #define USEM_REG_TS_14_AS 0x300070
5399 /* [RW 3] The arbitration scheme of time_slot 15 */
5400 #define USEM_REG_TS_15_AS 0x300074
5401 /* [RW 3] The arbitration scheme of time_slot 16 */
5402 #define USEM_REG_TS_16_AS 0x300078
5403 /* [RW 3] The arbitration scheme of time_slot 17 */
5404 #define USEM_REG_TS_17_AS 0x30007c
5405 /* [RW 3] The arbitration scheme of time_slot 18 */
5406 #define USEM_REG_TS_18_AS 0x300080
5407 /* [RW 3] The arbitration scheme of time_slot 1 */
5408 #define USEM_REG_TS_1_AS 0x30003c
5409 /* [RW 3] The arbitration scheme of time_slot 2 */
5410 #define USEM_REG_TS_2_AS 0x300040
5411 /* [RW 3] The arbitration scheme of time_slot 3 */
5412 #define USEM_REG_TS_3_AS 0x300044
5413 /* [RW 3] The arbitration scheme of time_slot 4 */
5414 #define USEM_REG_TS_4_AS 0x300048
5415 /* [RW 3] The arbitration scheme of time_slot 5 */
5416 #define USEM_REG_TS_5_AS 0x30004c
5417 /* [RW 3] The arbitration scheme of time_slot 6 */
5418 #define USEM_REG_TS_6_AS 0x300050
5419 /* [RW 3] The arbitration scheme of time_slot 7 */
5420 #define USEM_REG_TS_7_AS 0x300054
5421 /* [RW 3] The arbitration scheme of time_slot 8 */
5422 #define USEM_REG_TS_8_AS 0x300058
5423 /* [RW 3] The arbitration scheme of time_slot 9 */
5424 #define USEM_REG_TS_9_AS 0x30005c
5425 /* [RW 32] Interrupt mask register #0 read/write */
5426 #define USEM_REG_USEM_INT_MASK_0 0x300110
5427 #define USEM_REG_USEM_INT_MASK_1 0x300120
5428 /* [R 32] Interrupt register #0 read */
5429 #define USEM_REG_USEM_INT_STS_0 0x300104
5430 #define USEM_REG_USEM_INT_STS_1 0x300114
5431 /* [RW 32] Parity mask register #0 read/write */
5432 #define USEM_REG_USEM_PRTY_MASK_0 0x300130
5433 #define USEM_REG_USEM_PRTY_MASK_1 0x300140
5434 /* [R 32] Parity register #0 read */
5435 #define USEM_REG_USEM_PRTY_STS_0 0x300124
5436 #define USEM_REG_USEM_PRTY_STS_1 0x300134
5437 /* [RC 32] Parity register #0 read clear */
5438 #define USEM_REG_USEM_PRTY_STS_CLR_0 0x300128
5439 #define USEM_REG_USEM_PRTY_STS_CLR_1 0x300138
5440 /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
5441 * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
5442 #define USEM_REG_VFPF_ERR_NUM 0x300380
5443 #define VFC_MEMORIES_RST_REG_CAM_RST (0x1<<0)
5444 #define VFC_MEMORIES_RST_REG_RAM_RST (0x1<<1)
5445 #define VFC_REG_MEMORIES_RST 0x1943c
5446 /* [RW 32] Indirect access to AG context with 32-bits granularity. The bits
5447 * [12:8] of the address should be the offset within the accessed LCID
5448 * context; the bits [7:0] are the accessed LCID.Example: to write to REG10
5449 * LCID100. The RBC address should be 13'ha64. */
5450 #define XCM_REG_AG_CTX 0x28000
5451 /* [RW 2] The queue index for registration on Aux1 counter flag. */
5452 #define XCM_REG_AUX1_Q 0x20134
5453 /* [RW 2] Per each decision rule the queue index to register to. */
5454 #define XCM_REG_AUX_CNT_FLG_Q_19 0x201b0
5455 /* [R 5] Used to read the XX protection CAM occupancy counter. */
5456 #define XCM_REG_CAM_OCCUP 0x20244
5457 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
5458 disregarded; valid output is deasserted; all other signals are treated as
5459 usual; if 1 - normal activity. */
5460 #define XCM_REG_CDU_AG_RD_IFEN 0x20044
5461 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
5462 are disregarded; all other signals are treated as usual; if 1 - normal
5463 activity. */
5464 #define XCM_REG_CDU_AG_WR_IFEN 0x20040
5465 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
5466 disregarded; valid output is deasserted; all other signals are treated as
5467 usual; if 1 - normal activity. */
5468 #define XCM_REG_CDU_SM_RD_IFEN 0x2004c
5469 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
5470 input is disregarded; all other signals are treated as usual; if 1 -
5471 normal activity. */
5472 #define XCM_REG_CDU_SM_WR_IFEN 0x20048
5473 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
5474 the initial credit value; read returns the current value of the credit
5475 counter. Must be initialized to 1 at start-up. */
5476 #define XCM_REG_CFC_INIT_CRD 0x20404
5477 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
5478 weight 8 (the most prioritised); 1 stands for weight 1(least
5479 prioritised); 2 stands for weight 2; tc. */
5480 #define XCM_REG_CP_WEIGHT 0x200dc
5481 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
5482 disregarded; acknowledge output is deasserted; all other signals are
5483 treated as usual; if 1 - normal activity. */
5484 #define XCM_REG_CSEM_IFEN 0x20028
5485 /* [RC 1] Set at message length mismatch (relative to last indication) at
5486 the csem interface. */
5487 #define XCM_REG_CSEM_LENGTH_MIS 0x20228
5488 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
5489 weight 8 (the most prioritised); 1 stands for weight 1(least
5490 prioritised); 2 stands for weight 2; tc. */
5491 #define XCM_REG_CSEM_WEIGHT 0x200c4
5492 /* [RW 1] Input dorq Interface enable. If 0 - the valid input is
5493 disregarded; acknowledge output is deasserted; all other signals are
5494 treated as usual; if 1 - normal activity. */
5495 #define XCM_REG_DORQ_IFEN 0x20030
5496 /* [RC 1] Set at message length mismatch (relative to last indication) at
5497 the dorq interface. */
5498 #define XCM_REG_DORQ_LENGTH_MIS 0x20230
5499 /* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for
5500 weight 8 (the most prioritised); 1 stands for weight 1(least
5501 prioritised); 2 stands for weight 2; tc. */
5502 #define XCM_REG_DORQ_WEIGHT 0x200cc
5503 /* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */
5504 #define XCM_REG_ERR_EVNT_ID 0x200b0
5505 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
5506 #define XCM_REG_ERR_XCM_HDR 0x200ac
5507 /* [RW 8] The Event ID for Timers expiration. */
5508 #define XCM_REG_EXPR_EVNT_ID 0x200b4
5509 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
5510 writes the initial credit value; read returns the current value of the
5511 credit counter. Must be initialized to 64 at start-up. */
5512 #define XCM_REG_FIC0_INIT_CRD 0x2040c
5513 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
5514 writes the initial credit value; read returns the current value of the
5515 credit counter. Must be initialized to 64 at start-up. */
5516 #define XCM_REG_FIC1_INIT_CRD 0x20410
5517 #define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118
5518 #define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c
5519 #define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108
5520 #define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c
5521 /* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1
5522 - strict priority defined by ~xcm_registers_gr_ag_pr.gr_ag_pr;
5523 ~xcm_registers_gr_ld0_pr.gr_ld0_pr and
5524 ~xcm_registers_gr_ld1_pr.gr_ld1_pr. */
5525 #define XCM_REG_GR_ARB_TYPE 0x2020c
5526 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
5527 highest priority is 3. It is supposed that the Channel group is the
5528 complement of the other 3 groups. */
5529 #define XCM_REG_GR_LD0_PR 0x20214
5530 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
5531 highest priority is 3. It is supposed that the Channel group is the
5532 complement of the other 3 groups. */
5533 #define XCM_REG_GR_LD1_PR 0x20218
5534 /* [RW 1] Input nig0 Interface enable. If 0 - the valid input is
5535 disregarded; acknowledge output is deasserted; all other signals are
5536 treated as usual; if 1 - normal activity. */
5537 #define XCM_REG_NIG0_IFEN 0x20038
5538 /* [RC 1] Set at message length mismatch (relative to last indication) at
5539 the nig0 interface. */
5540 #define XCM_REG_NIG0_LENGTH_MIS 0x20238
5541 /* [RW 3] The weight of the input nig0 in the WRR mechanism. 0 stands for
5542 weight 8 (the most prioritised); 1 stands for weight 1(least
5543 prioritised); 2 stands for weight 2; tc. */
5544 #define XCM_REG_NIG0_WEIGHT 0x200d4
5545 /* [RW 1] Input nig1 Interface enable. If 0 - the valid input is
5546 disregarded; acknowledge output is deasserted; all other signals are
5547 treated as usual; if 1 - normal activity. */
5548 #define XCM_REG_NIG1_IFEN 0x2003c
5549 /* [RC 1] Set at message length mismatch (relative to last indication) at
5550 the nig1 interface. */
5551 #define XCM_REG_NIG1_LENGTH_MIS 0x2023c
5552 /* [RW 5] The number of double REG-pairs; loaded from the STORM context and
5553 sent to STORM; for a specific connection type. The double REG-pairs are
5554 used in order to align to STORM context row size of 128 bits. The offset
5555 of these data in the STORM context is always 0. Index _i stands for the
5556 connection type (one of 16). */
5557 #define XCM_REG_N_SM_CTX_LD_0 0x20060
5558 #define XCM_REG_N_SM_CTX_LD_1 0x20064
5559 #define XCM_REG_N_SM_CTX_LD_2 0x20068
5560 #define XCM_REG_N_SM_CTX_LD_3 0x2006c
5561 #define XCM_REG_N_SM_CTX_LD_4 0x20070
5562 #define XCM_REG_N_SM_CTX_LD_5 0x20074
5563 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
5564 acknowledge output is deasserted; all other signals are treated as usual;
5565 if 1 - normal activity. */
5566 #define XCM_REG_PBF_IFEN 0x20034
5567 /* [RC 1] Set at message length mismatch (relative to last indication) at
5568 the pbf interface. */
5569 #define XCM_REG_PBF_LENGTH_MIS 0x20234
5570 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
5571 weight 8 (the most prioritised); 1 stands for weight 1(least
5572 prioritised); 2 stands for weight 2; tc. */
5573 #define XCM_REG_PBF_WEIGHT 0x200d0
5574 #define XCM_REG_PHYS_QNUM3_0 0x20100
5575 #define XCM_REG_PHYS_QNUM3_1 0x20104
5576 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
5577 #define XCM_REG_STOP_EVNT_ID 0x200b8
5578 /* [RC 1] Set at message length mismatch (relative to last indication) at
5579 the STORM interface. */
5580 #define XCM_REG_STORM_LENGTH_MIS 0x2021c
5581 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
5582 weight 8 (the most prioritised); 1 stands for weight 1(least
5583 prioritised); 2 stands for weight 2; tc. */
5584 #define XCM_REG_STORM_WEIGHT 0x200bc
5585 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
5586 disregarded; acknowledge output is deasserted; all other signals are
5587 treated as usual; if 1 - normal activity. */
5588 #define XCM_REG_STORM_XCM_IFEN 0x20010
5589 /* [RW 4] Timers output initial credit. Max credit available - 15.Write
5590 writes the initial credit value; read returns the current value of the
5591 credit counter. Must be initialized to 4 at start-up. */
5592 #define XCM_REG_TM_INIT_CRD 0x2041c
5593 /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
5594 weight 8 (the most prioritised); 1 stands for weight 1(least
5595 prioritised); 2 stands for weight 2; tc. */
5596 #define XCM_REG_TM_WEIGHT 0x200ec
5597 /* [RW 28] The CM header for Timers expiration command. */
5598 #define XCM_REG_TM_XCM_HDR 0x200a8
5599 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
5600 disregarded; acknowledge output is deasserted; all other signals are
5601 treated as usual; if 1 - normal activity. */
5602 #define XCM_REG_TM_XCM_IFEN 0x2001c
5603 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
5604 disregarded; acknowledge output is deasserted; all other signals are
5605 treated as usual; if 1 - normal activity. */
5606 #define XCM_REG_TSEM_IFEN 0x20024
5607 /* [RC 1] Set at message length mismatch (relative to last indication) at
5608 the tsem interface. */
5609 #define XCM_REG_TSEM_LENGTH_MIS 0x20224
5610 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
5611 weight 8 (the most prioritised); 1 stands for weight 1(least
5612 prioritised); 2 stands for weight 2; tc. */
5613 #define XCM_REG_TSEM_WEIGHT 0x200c0
5614 /* [RW 2] The queue index for registration on UNA greater NXT decision rule. */
5615 #define XCM_REG_UNA_GT_NXT_Q 0x20120
5616 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
5617 disregarded; acknowledge output is deasserted; all other signals are
5618 treated as usual; if 1 - normal activity. */
5619 #define XCM_REG_USEM_IFEN 0x2002c
5620 /* [RC 1] Message length mismatch (relative to last indication) at the usem
5621 interface. */
5622 #define XCM_REG_USEM_LENGTH_MIS 0x2022c
5623 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
5624 weight 8 (the most prioritised); 1 stands for weight 1(least
5625 prioritised); 2 stands for weight 2; tc. */
5626 #define XCM_REG_USEM_WEIGHT 0x200c8
5627 #define XCM_REG_WU_DA_CNT_CMD00 0x201d4
5628 #define XCM_REG_WU_DA_CNT_CMD01 0x201d8
5629 #define XCM_REG_WU_DA_CNT_CMD10 0x201dc
5630 #define XCM_REG_WU_DA_CNT_CMD11 0x201e0
5631 #define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4
5632 #define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8
5633 #define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec
5634 #define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0
5635 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4
5636 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8
5637 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc
5638 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0
5639 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
5640 acknowledge output is deasserted; all other signals are treated as usual;
5641 if 1 - normal activity. */
5642 #define XCM_REG_XCM_CFC_IFEN 0x20050
5643 /* [RW 14] Interrupt mask register #0 read/write */
5644 #define XCM_REG_XCM_INT_MASK 0x202b4
5645 /* [R 14] Interrupt register #0 read */
5646 #define XCM_REG_XCM_INT_STS 0x202a8
5647 /* [RW 30] Parity mask register #0 read/write */
5648 #define XCM_REG_XCM_PRTY_MASK 0x202c4
5649 /* [R 30] Parity register #0 read */
5650 #define XCM_REG_XCM_PRTY_STS 0x202b8
5651 /* [RC 30] Parity register #0 read clear */
5652 #define XCM_REG_XCM_PRTY_STS_CLR 0x202bc
5653
5654 /* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS
5655 REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
5656 Is used to determine the number of the AG context REG-pairs written back;
5657 when the Reg1WbFlg isn't set. */
5658 #define XCM_REG_XCM_REG0_SZ 0x200f4
5659 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
5660 disregarded; valid is deasserted; all other signals are treated as usual;
5661 if 1 - normal activity. */
5662 #define XCM_REG_XCM_STORM0_IFEN 0x20004
5663 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
5664 disregarded; valid is deasserted; all other signals are treated as usual;
5665 if 1 - normal activity. */
5666 #define XCM_REG_XCM_STORM1_IFEN 0x20008
5667 /* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
5668 disregarded; acknowledge output is deasserted; all other signals are
5669 treated as usual; if 1 - normal activity. */
5670 #define XCM_REG_XCM_TM_IFEN 0x20020
5671 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
5672 disregarded; valid is deasserted; all other signals are treated as usual;
5673 if 1 - normal activity. */
5674 #define XCM_REG_XCM_XQM_IFEN 0x2000c
5675 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
5676 #define XCM_REG_XCM_XQM_USE_Q 0x200f0
5677 /* [RW 4] The value by which CFC updates the activity counter at QM bypass. */
5678 #define XCM_REG_XQM_BYP_ACT_UPD 0x200fc
5679 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
5680 the initial credit value; read returns the current value of the credit
5681 counter. Must be initialized to 32 at start-up. */
5682 #define XCM_REG_XQM_INIT_CRD 0x20420
5683 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
5684 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
5685 prioritised); 2 stands for weight 2; tc. */
5686 #define XCM_REG_XQM_P_WEIGHT 0x200e4
5687 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
5688 stands for weight 8 (the most prioritised); 1 stands for weight 1(least
5689 prioritised); 2 stands for weight 2; tc. */
5690 #define XCM_REG_XQM_S_WEIGHT 0x200e8
5691 /* [RW 28] The CM header value for QM request (primary). */
5692 #define XCM_REG_XQM_XCM_HDR_P 0x200a0
5693 /* [RW 28] The CM header value for QM request (secondary). */
5694 #define XCM_REG_XQM_XCM_HDR_S 0x200a4
5695 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
5696 acknowledge output is deasserted; all other signals are treated as usual;
5697 if 1 - normal activity. */
5698 #define XCM_REG_XQM_XCM_IFEN 0x20014
5699 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
5700 acknowledge output is deasserted; all other signals are treated as usual;
5701 if 1 - normal activity. */
5702 #define XCM_REG_XSDM_IFEN 0x20018
5703 /* [RC 1] Set at message length mismatch (relative to last indication) at
5704 the SDM interface. */
5705 #define XCM_REG_XSDM_LENGTH_MIS 0x20220
5706 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
5707 weight 8 (the most prioritised); 1 stands for weight 1(least
5708 prioritised); 2 stands for weight 2; tc. */
5709 #define XCM_REG_XSDM_WEIGHT 0x200e0
5710 /* [RW 17] Indirect access to the descriptor table of the XX protection
5711 mechanism. The fields are: [5:0] - message length; 11:6] - message
5712 pointer; 16:12] - next pointer. */
5713 #define XCM_REG_XX_DESCR_TABLE 0x20480
5714 #define XCM_REG_XX_DESCR_TABLE_SIZE 32
5715 /* [R 6] Used to read the XX protection Free counter. */
5716 #define XCM_REG_XX_FREE 0x20240
5717 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
5718 of the Input Stage XX protection buffer by the XX protection pending
5719 messages. Max credit available - 3.Write writes the initial credit value;
5720 read returns the current value of the credit counter. Must be initialized
5721 to 2 at start-up. */
5722 #define XCM_REG_XX_INIT_CRD 0x20424
5723 /* [RW 6] The maximum number of pending messages; which may be stored in XX
5724 protection. ~xcm_registers_xx_free.xx_free read on read. */
5725 #define XCM_REG_XX_MSG_NUM 0x20428
5726 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
5727 #define XCM_REG_XX_OVFL_EVNT_ID 0x20058
5728 #define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS (0x1<<0)
5729 #define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS (0x1<<1)
5730 #define XMAC_CTRL_REG_LINE_LOCAL_LPBK (0x1<<2)
5731 #define XMAC_CTRL_REG_RX_EN (0x1<<1)
5732 #define XMAC_CTRL_REG_SOFT_RESET (0x1<<6)
5733 #define XMAC_CTRL_REG_TX_EN (0x1<<0)
5734 #define XMAC_CTRL_REG_XLGMII_ALIGN_ENB (0x1<<7)
5735 #define XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN (0x1<<18)
5736 #define XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN (0x1<<17)
5737 #define XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON (0x1<<1)
5738 #define XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN (0x1<<0)
5739 #define XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN (0x1<<3)
5740 #define XMAC_PFC_CTRL_HI_REG_RX_PFC_EN (0x1<<4)
5741 #define XMAC_PFC_CTRL_HI_REG_TX_PFC_EN (0x1<<5)
5742 #define XMAC_REG_CLEAR_RX_LSS_STATUS 0x60
5743 #define XMAC_REG_CTRL 0
5744 /* [RW 16] Upper 48 bits of ctrl_sa register. Used as the SA in PAUSE/PFC
5745 * packets transmitted by the MAC */
5746 #define XMAC_REG_CTRL_SA_HI 0x2c
5747 /* [RW 32] Lower 48 bits of ctrl_sa register. Used as the SA in PAUSE/PFC
5748 * packets transmitted by the MAC */
5749 #define XMAC_REG_CTRL_SA_LO 0x28
5750 #define XMAC_REG_EEE_CTRL 0xd8
5751 #define XMAC_REG_EEE_TIMERS_HI 0xe4
5752 #define XMAC_REG_PAUSE_CTRL 0x68
5753 #define XMAC_REG_PFC_CTRL 0x70
5754 #define XMAC_REG_PFC_CTRL_HI 0x74
5755 #define XMAC_REG_RX_LSS_CTRL 0x50
5756 #define XMAC_REG_RX_LSS_STATUS 0x58
5757 /* [RW 14] Maximum packet size in receive direction; exclusive of preamble &
5758 * CRC in strip mode */
5759 #define XMAC_REG_RX_MAX_SIZE 0x40
5760 #define XMAC_REG_TX_CTRL 0x20
5761 #define XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE (0x1<<0)
5762 #define XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE (0x1<<1)
5763 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
5764 The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] -
5765 header pointer. */
5766 #define XCM_REG_XX_TABLE 0x20500
5767 /* [RW 8] The event id for aggregated interrupt 0 */
5768 #define XSDM_REG_AGG_INT_EVENT_0 0x166038
5769 #define XSDM_REG_AGG_INT_EVENT_1 0x16603c
5770 #define XSDM_REG_AGG_INT_EVENT_10 0x166060
5771 #define XSDM_REG_AGG_INT_EVENT_11 0x166064
5772 #define XSDM_REG_AGG_INT_EVENT_12 0x166068
5773 #define XSDM_REG_AGG_INT_EVENT_13 0x16606c
5774 #define XSDM_REG_AGG_INT_EVENT_14 0x166070
5775 #define XSDM_REG_AGG_INT_EVENT_2 0x166040
5776 #define XSDM_REG_AGG_INT_EVENT_3 0x166044
5777 #define XSDM_REG_AGG_INT_EVENT_4 0x166048
5778 #define XSDM_REG_AGG_INT_EVENT_5 0x16604c
5779 #define XSDM_REG_AGG_INT_EVENT_6 0x166050
5780 #define XSDM_REG_AGG_INT_EVENT_7 0x166054
5781 #define XSDM_REG_AGG_INT_EVENT_8 0x166058
5782 #define XSDM_REG_AGG_INT_EVENT_9 0x16605c
5783 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
5784 or auto-mask-mode (1) */
5785 #define XSDM_REG_AGG_INT_MODE_0 0x1661b8
5786 #define XSDM_REG_AGG_INT_MODE_1 0x1661bc
5787 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
5788 #define XSDM_REG_CFC_RSP_START_ADDR 0x166008
5789 /* [RW 16] The maximum value of the completion counter #0 */
5790 #define XSDM_REG_CMP_COUNTER_MAX0 0x16601c
5791 /* [RW 16] The maximum value of the completion counter #1 */
5792 #define XSDM_REG_CMP_COUNTER_MAX1 0x166020
5793 /* [RW 16] The maximum value of the completion counter #2 */
5794 #define XSDM_REG_CMP_COUNTER_MAX2 0x166024
5795 /* [RW 16] The maximum value of the completion counter #3 */
5796 #define XSDM_REG_CMP_COUNTER_MAX3 0x166028
5797 /* [RW 13] The start address in the internal RAM for the completion
5798 counters. */
5799 #define XSDM_REG_CMP_COUNTER_START_ADDR 0x16600c
5800 #define XSDM_REG_ENABLE_IN1 0x166238
5801 #define XSDM_REG_ENABLE_IN2 0x16623c
5802 #define XSDM_REG_ENABLE_OUT1 0x166240
5803 #define XSDM_REG_ENABLE_OUT2 0x166244
5804 /* [RW 4] The initial number of messages that can be sent to the pxp control
5805 interface without receiving any ACK. */
5806 #define XSDM_REG_INIT_CREDIT_PXP_CTRL 0x1664bc
5807 /* [ST 32] The number of ACK after placement messages received */
5808 #define XSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x16627c
5809 /* [ST 32] The number of packet end messages received from the parser */
5810 #define XSDM_REG_NUM_OF_PKT_END_MSG 0x166274
5811 /* [ST 32] The number of requests received from the pxp async if */
5812 #define XSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x166278
5813 /* [ST 32] The number of commands received in queue 0 */
5814 #define XSDM_REG_NUM_OF_Q0_CMD 0x166248
5815 /* [ST 32] The number of commands received in queue 10 */
5816 #define XSDM_REG_NUM_OF_Q10_CMD 0x16626c
5817 /* [ST 32] The number of commands received in queue 11 */
5818 #define XSDM_REG_NUM_OF_Q11_CMD 0x166270
5819 /* [ST 32] The number of commands received in queue 1 */
5820 #define XSDM_REG_NUM_OF_Q1_CMD 0x16624c
5821 /* [ST 32] The number of commands received in queue 3 */
5822 #define XSDM_REG_NUM_OF_Q3_CMD 0x166250
5823 /* [ST 32] The number of commands received in queue 4 */
5824 #define XSDM_REG_NUM_OF_Q4_CMD 0x166254
5825 /* [ST 32] The number of commands received in queue 5 */
5826 #define XSDM_REG_NUM_OF_Q5_CMD 0x166258
5827 /* [ST 32] The number of commands received in queue 6 */
5828 #define XSDM_REG_NUM_OF_Q6_CMD 0x16625c
5829 /* [ST 32] The number of commands received in queue 7 */
5830 #define XSDM_REG_NUM_OF_Q7_CMD 0x166260
5831 /* [ST 32] The number of commands received in queue 8 */
5832 #define XSDM_REG_NUM_OF_Q8_CMD 0x166264
5833 /* [ST 32] The number of commands received in queue 9 */
5834 #define XSDM_REG_NUM_OF_Q9_CMD 0x166268
5835 /* [RW 13] The start address in the internal RAM for queue counters */
5836 #define XSDM_REG_Q_COUNTER_START_ADDR 0x166010
5837 /* [W 17] Generate an operation after completion; bit-16 is
5838 * AggVectIdx_valid; bits 15:8 are AggVectIdx; bits 7:5 are the TRIG and
5839 * bits 4:0 are the T124Param[4:0] */
5840 #define XSDM_REG_OPERATION_GEN 0x1664c4
5841 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
5842 #define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x166548
5843 /* [R 1] parser fifo empty in sdm_sync block */
5844 #define XSDM_REG_SYNC_PARSER_EMPTY 0x166550
5845 /* [R 1] parser serial fifo empty in sdm_sync block */
5846 #define XSDM_REG_SYNC_SYNC_EMPTY 0x166558
5847 /* [RW 32] Tick for timer counter. Applicable only when
5848 ~xsdm_registers_timer_tick_enable.timer_tick_enable =1 */
5849 #define XSDM_REG_TIMER_TICK 0x166000
5850 /* [RW 32] Interrupt mask register #0 read/write */
5851 #define XSDM_REG_XSDM_INT_MASK_0 0x16629c
5852 #define XSDM_REG_XSDM_INT_MASK_1 0x1662ac
5853 /* [R 32] Interrupt register #0 read */
5854 #define XSDM_REG_XSDM_INT_STS_0 0x166290
5855 #define XSDM_REG_XSDM_INT_STS_1 0x1662a0
5856 /* [RW 11] Parity mask register #0 read/write */
5857 #define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
5858 /* [R 11] Parity register #0 read */
5859 #define XSDM_REG_XSDM_PRTY_STS 0x1662b0
5860 /* [RC 11] Parity register #0 read clear */
5861 #define XSDM_REG_XSDM_PRTY_STS_CLR 0x1662b4
5862 /* [RW 5] The number of time_slots in the arbitration cycle */
5863 #define XSEM_REG_ARB_CYCLE_SIZE 0x280034
5864 /* [RW 3] The source that is associated with arbitration element 0. Source
5865 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
5866 sleeping thread with priority 1; 4- sleeping thread with priority 2 */
5867 #define XSEM_REG_ARB_ELEMENT0 0x280020
5868 /* [RW 3] The source that is associated with arbitration element 1. Source
5869 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
5870 sleeping thread with priority 1; 4- sleeping thread with priority 2.
5871 Could not be equal to register ~xsem_registers_arb_element0.arb_element0 */
5872 #define XSEM_REG_ARB_ELEMENT1 0x280024
5873 /* [RW 3] The source that is associated with arbitration element 2. Source
5874 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
5875 sleeping thread with priority 1; 4- sleeping thread with priority 2.
5876 Could not be equal to register ~xsem_registers_arb_element0.arb_element0
5877 and ~xsem_registers_arb_element1.arb_element1 */
5878 #define XSEM_REG_ARB_ELEMENT2 0x280028
5879 /* [RW 3] The source that is associated with arbitration element 3. Source
5880 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
5881 sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
5882 not be equal to register ~xsem_registers_arb_element0.arb_element0 and
5883 ~xsem_registers_arb_element1.arb_element1 and
5884 ~xsem_registers_arb_element2.arb_element2 */
5885 #define XSEM_REG_ARB_ELEMENT3 0x28002c
5886 /* [RW 3] The source that is associated with arbitration element 4. Source
5887 decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
5888 sleeping thread with priority 1; 4- sleeping thread with priority 2.
5889 Could not be equal to register ~xsem_registers_arb_element0.arb_element0
5890 and ~xsem_registers_arb_element1.arb_element1 and
5891 ~xsem_registers_arb_element2.arb_element2 and
5892 ~xsem_registers_arb_element3.arb_element3 */
5893 #define XSEM_REG_ARB_ELEMENT4 0x280030
5894 #define XSEM_REG_ENABLE_IN 0x2800a4
5895 #define XSEM_REG_ENABLE_OUT 0x2800a8
5896 /* [RW 32] This address space contains all registers and memories that are
5897 placed in SEM_FAST block. The SEM_FAST registers are described in
5898 appendix B. In order to access the sem_fast registers the base address
5899 ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
5900 #define XSEM_REG_FAST_MEMORY 0x2a0000
5901 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
5902 by the microcode */
5903 #define XSEM_REG_FIC0_DISABLE 0x280224
5904 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
5905 by the microcode */
5906 #define XSEM_REG_FIC1_DISABLE 0x280234
5907 /* [RW 15] Interrupt table Read and write access to it is not possible in
5908 the middle of the work */
5909 #define XSEM_REG_INT_TABLE 0x280400
5910 /* [ST 24] Statistics register. The number of messages that entered through
5911 FIC0 */
5912 #define XSEM_REG_MSG_NUM_FIC0 0x280000
5913 /* [ST 24] Statistics register. The number of messages that entered through
5914 FIC1 */
5915 #define XSEM_REG_MSG_NUM_FIC1 0x280004
5916 /* [ST 24] Statistics register. The number of messages that were sent to
5917 FOC0 */
5918 #define XSEM_REG_MSG_NUM_FOC0 0x280008
5919 /* [ST 24] Statistics register. The number of messages that were sent to
5920 FOC1 */
5921 #define XSEM_REG_MSG_NUM_FOC1 0x28000c
5922 /* [ST 24] Statistics register. The number of messages that were sent to
5923 FOC2 */
5924 #define XSEM_REG_MSG_NUM_FOC2 0x280010
5925 /* [ST 24] Statistics register. The number of messages that were sent to
5926 FOC3 */
5927 #define XSEM_REG_MSG_NUM_FOC3 0x280014
5928 /* [RW 1] Disables input messages from the passive buffer May be updated
5929 during run_time by the microcode */
5930 #define XSEM_REG_PAS_DISABLE 0x28024c
5931 /* [WB 128] Debug only. Passive buffer memory */
5932 #define XSEM_REG_PASSIVE_BUFFER 0x282000
5933 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
5934 #define XSEM_REG_PRAM 0x2c0000
5935 /* [R 16] Valid sleeping threads indication have bit per thread */
5936 #define XSEM_REG_SLEEP_THREADS_VALID 0x28026c
5937 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
5938 #define XSEM_REG_SLOW_EXT_STORE_EMPTY 0x2802a0
5939 /* [RW 16] List of free threads . There is a bit per thread. */
5940 #define XSEM_REG_THREADS_LIST 0x2802e4
5941 /* [RW 3] The arbitration scheme of time_slot 0 */
5942 #define XSEM_REG_TS_0_AS 0x280038
5943 /* [RW 3] The arbitration scheme of time_slot 10 */
5944 #define XSEM_REG_TS_10_AS 0x280060
5945 /* [RW 3] The arbitration scheme of time_slot 11 */
5946 #define XSEM_REG_TS_11_AS 0x280064
5947 /* [RW 3] The arbitration scheme of time_slot 12 */
5948 #define XSEM_REG_TS_12_AS 0x280068
5949 /* [RW 3] The arbitration scheme of time_slot 13 */
5950 #define XSEM_REG_TS_13_AS 0x28006c
5951 /* [RW 3] The arbitration scheme of time_slot 14 */
5952 #define XSEM_REG_TS_14_AS 0x280070
5953 /* [RW 3] The arbitration scheme of time_slot 15 */
5954 #define XSEM_REG_TS_15_AS 0x280074
5955 /* [RW 3] The arbitration scheme of time_slot 16 */
5956 #define XSEM_REG_TS_16_AS 0x280078
5957 /* [RW 3] The arbitration scheme of time_slot 17 */
5958 #define XSEM_REG_TS_17_AS 0x28007c
5959 /* [RW 3] The arbitration scheme of time_slot 18 */
5960 #define XSEM_REG_TS_18_AS 0x280080
5961 /* [RW 3] The arbitration scheme of time_slot 1 */
5962 #define XSEM_REG_TS_1_AS 0x28003c
5963 /* [RW 3] The arbitration scheme of time_slot 2 */
5964 #define XSEM_REG_TS_2_AS 0x280040
5965 /* [RW 3] The arbitration scheme of time_slot 3 */
5966 #define XSEM_REG_TS_3_AS 0x280044
5967 /* [RW 3] The arbitration scheme of time_slot 4 */
5968 #define XSEM_REG_TS_4_AS 0x280048
5969 /* [RW 3] The arbitration scheme of time_slot 5 */
5970 #define XSEM_REG_TS_5_AS 0x28004c
5971 /* [RW 3] The arbitration scheme of time_slot 6 */
5972 #define XSEM_REG_TS_6_AS 0x280050
5973 /* [RW 3] The arbitration scheme of time_slot 7 */
5974 #define XSEM_REG_TS_7_AS 0x280054
5975 /* [RW 3] The arbitration scheme of time_slot 8 */
5976 #define XSEM_REG_TS_8_AS 0x280058
5977 /* [RW 3] The arbitration scheme of time_slot 9 */
5978 #define XSEM_REG_TS_9_AS 0x28005c
5979 /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
5980 * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
5981 #define XSEM_REG_VFPF_ERR_NUM 0x280380
5982 /* [RW 32] Interrupt mask register #0 read/write */
5983 #define XSEM_REG_XSEM_INT_MASK_0 0x280110
5984 #define XSEM_REG_XSEM_INT_MASK_1 0x280120
5985 /* [R 32] Interrupt register #0 read */
5986 #define XSEM_REG_XSEM_INT_STS_0 0x280104
5987 #define XSEM_REG_XSEM_INT_STS_1 0x280114
5988 /* [RW 32] Parity mask register #0 read/write */
5989 #define XSEM_REG_XSEM_PRTY_MASK_0 0x280130
5990 #define XSEM_REG_XSEM_PRTY_MASK_1 0x280140
5991 /* [R 32] Parity register #0 read */
5992 #define XSEM_REG_XSEM_PRTY_STS_0 0x280124
5993 #define XSEM_REG_XSEM_PRTY_STS_1 0x280134
5994 /* [RC 32] Parity register #0 read clear */
5995 #define XSEM_REG_XSEM_PRTY_STS_CLR_0 0x280128
5996 #define XSEM_REG_XSEM_PRTY_STS_CLR_1 0x280138
5997 #define MCPR_ACCESS_LOCK_LOCK (1L<<31)
5998 #define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
5999 #define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
6000 #define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
6001 #define MCPR_NVM_CFG4_FLASH_SIZE (0x7L<<0)
6002 #define MCPR_NVM_COMMAND_DOIT (1L<<4)
6003 #define MCPR_NVM_COMMAND_DONE (1L<<3)
6004 #define MCPR_NVM_COMMAND_FIRST (1L<<7)
6005 #define MCPR_NVM_COMMAND_LAST (1L<<8)
6006 #define MCPR_NVM_COMMAND_WR (1L<<5)
6007 #define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9)
6008 #define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5)
6009 #define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1)
6010 #define BIGMAC_REGISTER_BMAC_CONTROL (0x00<<3)
6011 #define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01<<3)
6012 #define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05<<3)
6013 #define BIGMAC_REGISTER_RX_CONTROL (0x21<<3)
6014 #define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46<<3)
6015 #define BIGMAC_REGISTER_RX_LSS_STATUS (0x43<<3)
6016 #define BIGMAC_REGISTER_RX_MAX_SIZE (0x23<<3)
6017 #define BIGMAC_REGISTER_RX_STAT_GR64 (0x26<<3)
6018 #define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42<<3)
6019 #define BIGMAC_REGISTER_TX_CONTROL (0x07<<3)
6020 #define BIGMAC_REGISTER_TX_MAX_SIZE (0x09<<3)
6021 #define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A<<3)
6022 #define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3)
6023 #define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3)
6024 #define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3)
6025 #define BIGMAC2_REGISTER_BMAC_CONTROL (0x00<<3)
6026 #define BIGMAC2_REGISTER_BMAC_XGXS_CONTROL (0x01<<3)
6027 #define BIGMAC2_REGISTER_CNT_MAX_SIZE (0x05<<3)
6028 #define BIGMAC2_REGISTER_PFC_CONTROL (0x06<<3)
6029 #define BIGMAC2_REGISTER_RX_CONTROL (0x3A<<3)
6030 #define BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS (0x62<<3)
6031 #define BIGMAC2_REGISTER_RX_LSS_STAT (0x3E<<3)
6032 #define BIGMAC2_REGISTER_RX_MAX_SIZE (0x3C<<3)
6033 #define BIGMAC2_REGISTER_RX_STAT_GR64 (0x40<<3)
6034 #define BIGMAC2_REGISTER_RX_STAT_GRIPJ (0x5f<<3)
6035 #define BIGMAC2_REGISTER_RX_STAT_GRPP (0x51<<3)
6036 #define BIGMAC2_REGISTER_TX_CONTROL (0x1C<<3)
6037 #define BIGMAC2_REGISTER_TX_MAX_SIZE (0x1E<<3)
6038 #define BIGMAC2_REGISTER_TX_PAUSE_CONTROL (0x20<<3)
6039 #define BIGMAC2_REGISTER_TX_SOURCE_ADDR (0x1D<<3)
6040 #define BIGMAC2_REGISTER_TX_STAT_GTBYT (0x39<<3)
6041 #define BIGMAC2_REGISTER_TX_STAT_GTPOK (0x22<<3)
6042 #define BIGMAC2_REGISTER_TX_STAT_GTPP (0x24<<3)
6043 #define EMAC_LED_1000MB_OVERRIDE (1L<<1)
6044 #define EMAC_LED_100MB_OVERRIDE (1L<<2)
6045 #define EMAC_LED_10MB_OVERRIDE (1L<<3)
6046 #define EMAC_LED_2500MB_OVERRIDE (1L<<12)
6047 #define EMAC_LED_OVERRIDE (1L<<0)
6048 #define EMAC_LED_TRAFFIC (1L<<6)
6049 #define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26)
6050 #define EMAC_MDIO_COMM_COMMAND_READ_22 (2L<<26)
6051 #define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26)
6052 #define EMAC_MDIO_COMM_COMMAND_WRITE_22 (1L<<26)
6053 #define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26)
6054 #define EMAC_MDIO_COMM_DATA (0xffffL<<0)
6055 #define EMAC_MDIO_COMM_START_BUSY (1L<<29)
6056 #define EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
6057 #define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31)
6058 #define EMAC_MDIO_MODE_CLOCK_CNT (0x3ffL<<16)
6059 #define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16
6060 #define EMAC_MDIO_STATUS_10MB (1L<<1)
6061 #define EMAC_MODE_25G_MODE (1L<<5)
6062 #define EMAC_MODE_HALF_DUPLEX (1L<<1)
6063 #define EMAC_MODE_PORT_GMII (2L<<2)
6064 #define EMAC_MODE_PORT_MII (1L<<2)
6065 #define EMAC_MODE_PORT_MII_10M (3L<<2)
6066 #define EMAC_MODE_RESET (1L<<0)
6067 #define EMAC_REG_EMAC_LED 0xc
6068 #define EMAC_REG_EMAC_MAC_MATCH 0x10
6069 #define EMAC_REG_EMAC_MDIO_COMM 0xac
6070 #define EMAC_REG_EMAC_MDIO_MODE 0xb4
6071 #define EMAC_REG_EMAC_MDIO_STATUS 0xb0
6072 #define EMAC_REG_EMAC_MODE 0x0
6073 #define EMAC_REG_EMAC_RX_MODE 0xc8
6074 #define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c
6075 #define EMAC_REG_EMAC_RX_STAT_AC 0x180
6076 #define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4
6077 #define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23
6078 #define EMAC_REG_EMAC_TX_MODE 0xbc
6079 #define EMAC_REG_EMAC_TX_STAT_AC 0x280
6080 #define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22
6081 #define EMAC_REG_RX_PFC_MODE 0x320
6082 #define EMAC_REG_RX_PFC_MODE_PRIORITIES (1L<<2)
6083 #define EMAC_REG_RX_PFC_MODE_RX_EN (1L<<1)
6084 #define EMAC_REG_RX_PFC_MODE_TX_EN (1L<<0)
6085 #define EMAC_REG_RX_PFC_PARAM 0x324
6086 #define EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT 0
6087 #define EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT 16
6088 #define EMAC_REG_RX_PFC_STATS_XOFF_RCVD 0x328
6089 #define EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT (0xffff<<0)
6090 #define EMAC_REG_RX_PFC_STATS_XOFF_SENT 0x330
6091 #define EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT (0xffff<<0)
6092 #define EMAC_REG_RX_PFC_STATS_XON_RCVD 0x32c
6093 #define EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT (0xffff<<0)
6094 #define EMAC_REG_RX_PFC_STATS_XON_SENT 0x334
6095 #define EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT (0xffff<<0)
6096 #define EMAC_RX_MODE_FLOW_EN (1L<<2)
6097 #define EMAC_RX_MODE_KEEP_MAC_CONTROL (1L<<3)
6098 #define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10)
6099 #define EMAC_RX_MODE_PROMISCUOUS (1L<<8)
6100 #define EMAC_RX_MODE_RESET (1L<<0)
6101 #define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31)
6102 #define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
6103 #define EMAC_TX_MODE_FLOW_EN (1L<<4)
6104 #define EMAC_TX_MODE_RESET (1L<<0)
6105 #define MISC_REGISTERS_GPIO_0 0
6106 #define MISC_REGISTERS_GPIO_1 1
6107 #define MISC_REGISTERS_GPIO_2 2
6108 #define MISC_REGISTERS_GPIO_3 3
6109 #define MISC_REGISTERS_GPIO_CLR_POS 16
6110 #define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24)
6111 #define MISC_REGISTERS_GPIO_FLOAT_POS 24
6112 #define MISC_REGISTERS_GPIO_HIGH 1
6113 #define MISC_REGISTERS_GPIO_INPUT_HI_Z 2
6114 #define MISC_REGISTERS_GPIO_INT_CLR_POS 24
6115 #define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR 0
6116 #define MISC_REGISTERS_GPIO_INT_OUTPUT_SET 1
6117 #define MISC_REGISTERS_GPIO_INT_SET_POS 16
6118 #define MISC_REGISTERS_GPIO_LOW 0
6119 #define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1
6120 #define MISC_REGISTERS_GPIO_OUTPUT_LOW 0
6121 #define MISC_REGISTERS_GPIO_PORT_SHIFT 4
6122 #define MISC_REGISTERS_GPIO_SET_POS 8
6123 #define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588
6124 #define MISC_REGISTERS_RESET_REG_1_RST_BRB1 (0x1<<0)
6125 #define MISC_REGISTERS_RESET_REG_1_RST_DORQ (0x1<<19)
6126 #define MISC_REGISTERS_RESET_REG_1_RST_HC (0x1<<29)
6127 #define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7)
6128 #define MISC_REGISTERS_RESET_REG_1_RST_PXP (0x1<<26)
6129 #define MISC_REGISTERS_RESET_REG_1_RST_PXPV (0x1<<27)
6130 #define MISC_REGISTERS_RESET_REG_1_RST_XSEM (0x1<<22)
6131 #define MISC_REGISTERS_RESET_REG_1_SET 0x584
6132 #define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598
6133 #define MISC_REGISTERS_RESET_REG_2_MSTAT0 (0x1<<24)
6134 #define MISC_REGISTERS_RESET_REG_2_MSTAT1 (0x1<<25)
6135 #define MISC_REGISTERS_RESET_REG_2_PGLC (0x1<<19)
6136 #define MISC_REGISTERS_RESET_REG_2_RST_ATC (0x1<<17)
6137 #define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0)
6138 #define MISC_REGISTERS_RESET_REG_2_RST_BMAC1 (0x1<<1)
6139 #define MISC_REGISTERS_RESET_REG_2_RST_EMAC0 (0x1<<2)
6140 #define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE (0x1<<14)
6141 #define MISC_REGISTERS_RESET_REG_2_RST_EMAC1 (0x1<<3)
6142 #define MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE (0x1<<15)
6143 #define MISC_REGISTERS_RESET_REG_2_RST_GRC (0x1<<4)
6144 #define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B (0x1<<6)
6145 #define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CORE (0x1<<8)
6146 #define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_CMN_CPU (0x1<<7)
6147 #define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE (0x1<<5)
6148 #define MISC_REGISTERS_RESET_REG_2_RST_MDIO (0x1<<13)
6149 #define MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE (0x1<<11)
6150 #define MISC_REGISTERS_RESET_REG_2_RST_PCI_MDIO (0x1<<13)
6151 #define MISC_REGISTERS_RESET_REG_2_RST_RBCN (0x1<<9)
6152 #define MISC_REGISTERS_RESET_REG_2_SET 0x594
6153 #define MISC_REGISTERS_RESET_REG_2_UMAC0 (0x1<<20)
6154 #define MISC_REGISTERS_RESET_REG_2_UMAC1 (0x1<<21)
6155 #define MISC_REGISTERS_RESET_REG_2_XMAC (0x1<<22)
6156 #define MISC_REGISTERS_RESET_REG_2_XMAC_SOFT (0x1<<23)
6157 #define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8
6158 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1<<1)
6159 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1<<2)
6160 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3)
6161 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1<<0)
6162 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1<<5)
6163 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1<<6)
6164 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1<<7)
6165 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4)
6166 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
6167 #define MISC_REGISTERS_RESET_REG_3_SET 0x5a4
6168 #define MISC_REGISTERS_SPIO_4 4
6169 #define MISC_REGISTERS_SPIO_5 5
6170 #define MISC_REGISTERS_SPIO_7 7
6171 #define MISC_REGISTERS_SPIO_CLR_POS 16
6172 #define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24)
6173 #define MISC_REGISTERS_SPIO_FLOAT_POS 24
6174 #define MISC_REGISTERS_SPIO_INPUT_HI_Z 2
6175 #define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16
6176 #define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1
6177 #define MISC_REGISTERS_SPIO_OUTPUT_LOW 0
6178 #define MISC_REGISTERS_SPIO_SET_POS 8
6179 #define MISC_SPIO_CLR_POS 16
6180 #define MISC_SPIO_FLOAT (0xffL<<24)
6181 #define MISC_SPIO_FLOAT_POS 24
6182 #define MISC_SPIO_INPUT_HI_Z 2
6183 #define MISC_SPIO_INT_OLD_SET_POS 16
6184 #define MISC_SPIO_OUTPUT_HIGH 1
6185 #define MISC_SPIO_OUTPUT_LOW 0
6186 #define MISC_SPIO_SET_POS 8
6187 #define MISC_SPIO_SPIO4 0x10
6188 #define MISC_SPIO_SPIO5 0x20
6189 #define HW_LOCK_MAX_RESOURCE_VALUE 31
6190 #define HW_LOCK_RESOURCE_DCBX_ADMIN_MIB 13
6191 #define HW_LOCK_RESOURCE_DRV_FLAGS 10
6192 #define HW_LOCK_RESOURCE_GPIO 1
6193 #define HW_LOCK_RESOURCE_MDIO 0
6194 #define HW_LOCK_RESOURCE_NVRAM 12
6195 #define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3
6196 #define HW_LOCK_RESOURCE_RECOVERY_LEADER_0 8
6197 #define HW_LOCK_RESOURCE_RECOVERY_LEADER_1 9
6198 #define HW_LOCK_RESOURCE_RECOVERY_REG 11
6199 #define HW_LOCK_RESOURCE_RESET 5
6200 #define HW_LOCK_RESOURCE_SPIO 2
6201 #define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4)
6202 #define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5)
6203 #define AEU_INPUTS_ATTN_BITS_BRB_HW_INTERRUPT (0x1<<19)
6204 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18)
6205 #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (0x1<<31)
6206 #define AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR (0x1<<30)
6207 #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (0x1<<9)
6208 #define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (0x1<<8)
6209 #define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (0x1<<7)
6210 #define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (0x1<<6)
6211 #define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (0x1<<29)
6212 #define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (0x1<<28)
6213 #define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (0x1<<1)
6214 #define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (0x1<<0)
6215 #define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (0x1<<18)
6216 #define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (0x1<<11)
6217 #define AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR (0x1<<10)
6218 #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (0x1<<13)
6219 #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (0x1<<12)
6220 #define AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 (0x1<<2)
6221 #define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (0x1<<12)
6222 #define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY (0x1<<28)
6223 #define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY (0x1U<<31)
6224 #define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY (0x1<<29)
6225 #define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY (0x1<<30)
6226 #define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (0x1<<15)
6227 #define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (0x1<<14)
6228 #define AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR (0x1<<14)
6229 #define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (0x1<<20)
6230 #define AEU_INPUTS_ATTN_BITS_PBCLIENT_HW_INTERRUPT (0x1<<31)
6231 #define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (0x1<<30)
6232 #define AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR (0x1<<0)
6233 #define AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT (0x1<<2)
6234 #define AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR (0x1<<3)
6235 #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (0x1<<5)
6236 #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (0x1<<4)
6237 #define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (0x1<<3)
6238 #define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (0x1<<2)
6239 #define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (0x1<<3)
6240 #define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (0x1<<2)
6241 #define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (0x1<<22)
6242 #define AEU_INPUTS_ATTN_BITS_SPIO5 (0x1<<15)
6243 #define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (0x1<<27)
6244 #define AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR (0x1<<26)
6245 #define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (0x1<<5)
6246 #define AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR (0x1<<4)
6247 #define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (0x1<<25)
6248 #define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (0x1<<24)
6249 #define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (0x1<<29)
6250 #define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (0x1<<28)
6251 #define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (0x1<<23)
6252 #define AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR (0x1<<22)
6253 #define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (0x1<<27)
6254 #define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (0x1<<26)
6255 #define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (0x1<<21)
6256 #define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (0x1<<20)
6257 #define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (0x1<<25)
6258 #define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (0x1<<24)
6259 #define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (0x1<<16)
6260 #define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (0x1<<9)
6261 #define AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR (0x1<<8)
6262 #define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (0x1<<7)
6263 #define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (0x1<<6)
6264 #define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (0x1<<11)
6265 #define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (0x1<<10)
6266
6267 #define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 (0x1<<5)
6268 #define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 (0x1<<9)
6269
6270 #define RESERVED_GENERAL_ATTENTION_BIT_0 0
6271
6272 #define EVEREST_GEN_ATTN_IN_USE_MASK 0x7ffe0
6273 #define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000
6274
6275 #define RESERVED_GENERAL_ATTENTION_BIT_6 6
6276 #define RESERVED_GENERAL_ATTENTION_BIT_7 7
6277 #define RESERVED_GENERAL_ATTENTION_BIT_8 8
6278 #define RESERVED_GENERAL_ATTENTION_BIT_9 9
6279 #define RESERVED_GENERAL_ATTENTION_BIT_10 10
6280 #define RESERVED_GENERAL_ATTENTION_BIT_11 11
6281 #define RESERVED_GENERAL_ATTENTION_BIT_12 12
6282 #define RESERVED_GENERAL_ATTENTION_BIT_13 13
6283 #define RESERVED_GENERAL_ATTENTION_BIT_14 14
6284 #define RESERVED_GENERAL_ATTENTION_BIT_15 15
6285 #define RESERVED_GENERAL_ATTENTION_BIT_16 16
6286 #define RESERVED_GENERAL_ATTENTION_BIT_17 17
6287 #define RESERVED_GENERAL_ATTENTION_BIT_18 18
6288 #define RESERVED_GENERAL_ATTENTION_BIT_19 19
6289 #define RESERVED_GENERAL_ATTENTION_BIT_20 20
6290 #define RESERVED_GENERAL_ATTENTION_BIT_21 21
6291
6292 /* storm asserts attention bits */
6293 #define TSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_7
6294 #define USTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_8
6295 #define CSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_9
6296 #define XSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_10
6297
6298 /* mcp error attention bit */
6299 #define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11
6300
6301 /*E1H NIG status sync attention mapped to group 4-7*/
6302 #define LINK_SYNC_ATTENTION_BIT_FUNC_0 RESERVED_GENERAL_ATTENTION_BIT_12
6303 #define LINK_SYNC_ATTENTION_BIT_FUNC_1 RESERVED_GENERAL_ATTENTION_BIT_13
6304 #define LINK_SYNC_ATTENTION_BIT_FUNC_2 RESERVED_GENERAL_ATTENTION_BIT_14
6305 #define LINK_SYNC_ATTENTION_BIT_FUNC_3 RESERVED_GENERAL_ATTENTION_BIT_15
6306 #define LINK_SYNC_ATTENTION_BIT_FUNC_4 RESERVED_GENERAL_ATTENTION_BIT_16
6307 #define LINK_SYNC_ATTENTION_BIT_FUNC_5 RESERVED_GENERAL_ATTENTION_BIT_17
6308 #define LINK_SYNC_ATTENTION_BIT_FUNC_6 RESERVED_GENERAL_ATTENTION_BIT_18
6309 #define LINK_SYNC_ATTENTION_BIT_FUNC_7 RESERVED_GENERAL_ATTENTION_BIT_19
6310
6311
6312 #define LATCHED_ATTN_RBCR 23
6313 #define LATCHED_ATTN_RBCT 24
6314 #define LATCHED_ATTN_RBCN 25
6315 #define LATCHED_ATTN_RBCU 26
6316 #define LATCHED_ATTN_RBCP 27
6317 #define LATCHED_ATTN_TIMEOUT_GRC 28
6318 #define LATCHED_ATTN_RSVD_GRC 29
6319 #define LATCHED_ATTN_ROM_PARITY_MCP 30
6320 #define LATCHED_ATTN_UM_RX_PARITY_MCP 31
6321 #define LATCHED_ATTN_UM_TX_PARITY_MCP 32
6322 #define LATCHED_ATTN_SCPAD_PARITY_MCP 33
6323
6324 #define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32)
6325 #define GENERAL_ATTEN_OFFSET(atten_name)\
6326 (1UL << ((94 + atten_name) % 32))
6327 /*
6328 * This file defines GRC base address for every block.
6329 * This file is included by chipsim, asm microcode and cpp microcode.
6330 * These values are used in Design.xml on regBase attribute
6331 * Use the base with the generated offsets of specific registers.
6332 */
6333
6334 #define GRCBASE_PXPCS 0x000000
6335 #define GRCBASE_PCICONFIG 0x002000
6336 #define GRCBASE_PCIREG 0x002400
6337 #define GRCBASE_EMAC0 0x008000
6338 #define GRCBASE_EMAC1 0x008400
6339 #define GRCBASE_DBU 0x008800
6340 #define GRCBASE_MISC 0x00A000
6341 #define GRCBASE_DBG 0x00C000
6342 #define GRCBASE_NIG 0x010000
6343 #define GRCBASE_XCM 0x020000
6344 #define GRCBASE_PRS 0x040000
6345 #define GRCBASE_SRCH 0x040400
6346 #define GRCBASE_TSDM 0x042000
6347 #define GRCBASE_TCM 0x050000
6348 #define GRCBASE_BRB1 0x060000
6349 #define GRCBASE_MCP 0x080000
6350 #define GRCBASE_UPB 0x0C1000
6351 #define GRCBASE_CSDM 0x0C2000
6352 #define GRCBASE_USDM 0x0C4000
6353 #define GRCBASE_CCM 0x0D0000
6354 #define GRCBASE_UCM 0x0E0000
6355 #define GRCBASE_CDU 0x101000
6356 #define GRCBASE_DMAE 0x102000
6357 #define GRCBASE_PXP 0x103000
6358 #define GRCBASE_CFC 0x104000
6359 #define GRCBASE_HC 0x108000
6360 #define GRCBASE_PXP2 0x120000
6361 #define GRCBASE_PBF 0x140000
6362 #define GRCBASE_UMAC0 0x160000
6363 #define GRCBASE_UMAC1 0x160400
6364 #define GRCBASE_XPB 0x161000
6365 #define GRCBASE_MSTAT0 0x162000
6366 #define GRCBASE_MSTAT1 0x162800
6367 #define GRCBASE_XMAC0 0x163000
6368 #define GRCBASE_XMAC1 0x163800
6369 #define GRCBASE_TIMERS 0x164000
6370 #define GRCBASE_XSDM 0x166000
6371 #define GRCBASE_QM 0x168000
6372 #define GRCBASE_DQ 0x170000
6373 #define GRCBASE_TSEM 0x180000
6374 #define GRCBASE_CSEM 0x200000
6375 #define GRCBASE_XSEM 0x280000
6376 #define GRCBASE_USEM 0x300000
6377 #define GRCBASE_MISC_AEU GRCBASE_MISC
6378
6379
6380 /* offset of configuration space in the pci core register */
6381 #define PCICFG_OFFSET 0x2000
6382 #define PCICFG_VENDOR_ID_OFFSET 0x00
6383 #define PCICFG_DEVICE_ID_OFFSET 0x02
6384 #define PCICFG_COMMAND_OFFSET 0x04
6385 #define PCICFG_COMMAND_IO_SPACE (1<<0)
6386 #define PCICFG_COMMAND_MEM_SPACE (1<<1)
6387 #define PCICFG_COMMAND_BUS_MASTER (1<<2)
6388 #define PCICFG_COMMAND_SPECIAL_CYCLES (1<<3)
6389 #define PCICFG_COMMAND_MWI_CYCLES (1<<4)
6390 #define PCICFG_COMMAND_VGA_SNOOP (1<<5)
6391 #define PCICFG_COMMAND_PERR_ENA (1<<6)
6392 #define PCICFG_COMMAND_STEPPING (1<<7)
6393 #define PCICFG_COMMAND_SERR_ENA (1<<8)
6394 #define PCICFG_COMMAND_FAST_B2B (1<<9)
6395 #define PCICFG_COMMAND_INT_DISABLE (1<<10)
6396 #define PCICFG_COMMAND_RESERVED (0x1f<<11)
6397 #define PCICFG_STATUS_OFFSET 0x06
6398 #define PCICFG_REVISION_ID_OFFSET 0x08
6399 #define PCICFG_REVESION_ID_MASK 0xff
6400 #define PCICFG_REVESION_ID_ERROR_VAL 0xff
6401 #define PCICFG_CACHE_LINE_SIZE 0x0c
6402 #define PCICFG_LATENCY_TIMER 0x0d
6403 #define PCICFG_BAR_1_LOW 0x10
6404 #define PCICFG_BAR_1_HIGH 0x14
6405 #define PCICFG_BAR_2_LOW 0x18
6406 #define PCICFG_BAR_2_HIGH 0x1c
6407 #define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c
6408 #define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e
6409 #define PCICFG_INT_LINE 0x3c
6410 #define PCICFG_INT_PIN 0x3d
6411 #define PCICFG_PM_CAPABILITY 0x48
6412 #define PCICFG_PM_CAPABILITY_VERSION (0x3<<16)
6413 #define PCICFG_PM_CAPABILITY_CLOCK (1<<19)
6414 #define PCICFG_PM_CAPABILITY_RESERVED (1<<20)
6415 #define PCICFG_PM_CAPABILITY_DSI (1<<21)
6416 #define PCICFG_PM_CAPABILITY_AUX_CURRENT (0x7<<22)
6417 #define PCICFG_PM_CAPABILITY_D1_SUPPORT (1<<25)
6418 #define PCICFG_PM_CAPABILITY_D2_SUPPORT (1<<26)
6419 #define PCICFG_PM_CAPABILITY_PME_IN_D0 (1<<27)
6420 #define PCICFG_PM_CAPABILITY_PME_IN_D1 (1<<28)
6421 #define PCICFG_PM_CAPABILITY_PME_IN_D2 (1<<29)
6422 #define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT (1<<30)
6423 #define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD (1<<31)
6424 #define PCICFG_PM_CSR_OFFSET 0x4c
6425 #define PCICFG_PM_CSR_STATE (0x3<<0)
6426 #define PCICFG_PM_CSR_PME_ENABLE (1<<8)
6427 #define PCICFG_PM_CSR_PME_STATUS (1<<15)
6428 #define PCICFG_MSI_CAP_ID_OFFSET 0x58
6429 #define PCICFG_MSI_CONTROL_ENABLE (0x1<<16)
6430 #define PCICFG_MSI_CONTROL_MCAP (0x7<<17)
6431 #define PCICFG_MSI_CONTROL_MENA (0x7<<20)
6432 #define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP (0x1<<23)
6433 #define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE (0x1<<24)
6434 #define PCICFG_GRC_ADDRESS 0x78
6435 #define PCICFG_GRC_DATA 0x80
6436 #define PCICFG_ME_REGISTER 0x98
6437 #define PCICFG_MSIX_CAP_ID_OFFSET 0xa0
6438 #define PCICFG_MSIX_CONTROL_TABLE_SIZE (0x7ff<<16)
6439 #define PCICFG_MSIX_CONTROL_RESERVED (0x7<<27)
6440 #define PCICFG_MSIX_CONTROL_FUNC_MASK (0x1<<30)
6441 #define PCICFG_MSIX_CONTROL_MSIX_ENABLE (0x1<<31)
6442
6443 #define PCICFG_DEVICE_CONTROL 0xb4
6444 #define PCICFG_DEVICE_STATUS 0xb6
6445 #define PCICFG_DEVICE_STATUS_CORR_ERR_DET (1<<0)
6446 #define PCICFG_DEVICE_STATUS_NON_FATAL_ERR_DET (1<<1)
6447 #define PCICFG_DEVICE_STATUS_FATAL_ERR_DET (1<<2)
6448 #define PCICFG_DEVICE_STATUS_UNSUP_REQ_DET (1<<3)
6449 #define PCICFG_DEVICE_STATUS_AUX_PWR_DET (1<<4)
6450 #define PCICFG_DEVICE_STATUS_NO_PEND (1<<5)
6451 #define PCICFG_LINK_CONTROL 0xbc
6452
6453
6454 #define BAR_USTRORM_INTMEM 0x400000
6455 #define BAR_CSTRORM_INTMEM 0x410000
6456 #define BAR_XSTRORM_INTMEM 0x420000
6457 #define BAR_TSTRORM_INTMEM 0x430000
6458
6459 /* for accessing the IGU in case of status block ACK */
6460 #define BAR_IGU_INTMEM 0x440000
6461
6462 #define BAR_DOORBELL_OFFSET 0x800000
6463
6464 #define BAR_ME_REGISTER 0x450000
6465
6466 /* config_2 offset */
6467 #define GRC_CONFIG_2_SIZE_REG 0x408
6468 #define PCI_CONFIG_2_BAR1_SIZE (0xfL<<0)
6469 #define PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0)
6470 #define PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0)
6471 #define PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0)
6472 #define PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0)
6473 #define PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0)
6474 #define PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0)
6475 #define PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0)
6476 #define PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0)
6477 #define PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0)
6478 #define PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0)
6479 #define PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0)
6480 #define PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0)
6481 #define PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0)
6482 #define PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0)
6483 #define PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0)
6484 #define PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0)
6485 #define PCI_CONFIG_2_BAR1_64ENA (1L<<4)
6486 #define PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5)
6487 #define PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6)
6488 #define PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7)
6489 #define PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8)
6490 #define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8)
6491 #define PCI_CONFIG_2_EXP_ROM_SIZE_2K (1L<<8)
6492 #define PCI_CONFIG_2_EXP_ROM_SIZE_4K (2L<<8)
6493 #define PCI_CONFIG_2_EXP_ROM_SIZE_8K (3L<<8)
6494 #define PCI_CONFIG_2_EXP_ROM_SIZE_16K (4L<<8)
6495 #define PCI_CONFIG_2_EXP_ROM_SIZE_32K (5L<<8)
6496 #define PCI_CONFIG_2_EXP_ROM_SIZE_64K (6L<<8)
6497 #define PCI_CONFIG_2_EXP_ROM_SIZE_128K (7L<<8)
6498 #define PCI_CONFIG_2_EXP_ROM_SIZE_256K (8L<<8)
6499 #define PCI_CONFIG_2_EXP_ROM_SIZE_512K (9L<<8)
6500 #define PCI_CONFIG_2_EXP_ROM_SIZE_1M (10L<<8)
6501 #define PCI_CONFIG_2_EXP_ROM_SIZE_2M (11L<<8)
6502 #define PCI_CONFIG_2_EXP_ROM_SIZE_4M (12L<<8)
6503 #define PCI_CONFIG_2_EXP_ROM_SIZE_8M (13L<<8)
6504 #define PCI_CONFIG_2_EXP_ROM_SIZE_16M (14L<<8)
6505 #define PCI_CONFIG_2_EXP_ROM_SIZE_32M (15L<<8)
6506 #define PCI_CONFIG_2_BAR_PREFETCH (1L<<16)
6507 #define PCI_CONFIG_2_RESERVED0 (0x7fffL<<17)
6508
6509 /* config_3 offset */
6510 #define GRC_CONFIG_3_SIZE_REG 0x40c
6511 #define PCI_CONFIG_3_STICKY_BYTE (0xffL<<0)
6512 #define PCI_CONFIG_3_FORCE_PME (1L<<24)
6513 #define PCI_CONFIG_3_PME_STATUS (1L<<25)
6514 #define PCI_CONFIG_3_PME_ENABLE (1L<<26)
6515 #define PCI_CONFIG_3_PM_STATE (0x3L<<27)
6516 #define PCI_CONFIG_3_VAUX_PRESET (1L<<30)
6517 #define PCI_CONFIG_3_PCI_POWER (1L<<31)
6518
6519 #define GRC_BAR2_CONFIG 0x4e0
6520 #define PCI_CONFIG_2_BAR2_SIZE (0xfL<<0)
6521 #define PCI_CONFIG_2_BAR2_SIZE_DISABLED (0L<<0)
6522 #define PCI_CONFIG_2_BAR2_SIZE_64K (1L<<0)
6523 #define PCI_CONFIG_2_BAR2_SIZE_128K (2L<<0)
6524 #define PCI_CONFIG_2_BAR2_SIZE_256K (3L<<0)
6525 #define PCI_CONFIG_2_BAR2_SIZE_512K (4L<<0)
6526 #define PCI_CONFIG_2_BAR2_SIZE_1M (5L<<0)
6527 #define PCI_CONFIG_2_BAR2_SIZE_2M (6L<<0)
6528 #define PCI_CONFIG_2_BAR2_SIZE_4M (7L<<0)
6529 #define PCI_CONFIG_2_BAR2_SIZE_8M (8L<<0)
6530 #define PCI_CONFIG_2_BAR2_SIZE_16M (9L<<0)
6531 #define PCI_CONFIG_2_BAR2_SIZE_32M (10L<<0)
6532 #define PCI_CONFIG_2_BAR2_SIZE_64M (11L<<0)
6533 #define PCI_CONFIG_2_BAR2_SIZE_128M (12L<<0)
6534 #define PCI_CONFIG_2_BAR2_SIZE_256M (13L<<0)
6535 #define PCI_CONFIG_2_BAR2_SIZE_512M (14L<<0)
6536 #define PCI_CONFIG_2_BAR2_SIZE_1G (15L<<0)
6537 #define PCI_CONFIG_2_BAR2_64ENA (1L<<4)
6538
6539 #define PCI_PM_DATA_A 0x410
6540 #define PCI_PM_DATA_B 0x414
6541 #define PCI_ID_VAL1 0x434
6542 #define PCI_ID_VAL2 0x438
6543 #define PCI_ID_VAL3 0x43c
6544
6545 #define GRC_CONFIG_REG_VF_MSIX_CONTROL 0x61C
6546 #define GRC_CONFIG_REG_PF_INIT_VF 0x624
6547 #define GRC_CR_PF_INIT_VF_PF_FIRST_VF_NUM_MASK 0xf
6548 /* First VF_NUM for PF is encoded in this register.
6549 * The number of VFs assigned to a PF is assumed to be a multiple of 8.
6550 * Software should program these bits based on Total Number of VFs \
6551 * programmed for each PF.
6552 * Since registers from 0x000-0x7ff are split across functions, each PF will
6553 * have the same location for the same 4 bits
6554 */
6555
6556 #define PXPCS_TL_CONTROL_5 0x814
6557 #define PXPCS_TL_CONTROL_5_UNKNOWNTYPE_ERR_ATTN (1 << 29) /*WC*/
6558 #define PXPCS_TL_CONTROL_5_BOUNDARY4K_ERR_ATTN (1 << 28) /*WC*/
6559 #define PXPCS_TL_CONTROL_5_MRRS_ERR_ATTN (1 << 27) /*WC*/
6560 #define PXPCS_TL_CONTROL_5_MPS_ERR_ATTN (1 << 26) /*WC*/
6561 #define PXPCS_TL_CONTROL_5_TTX_BRIDGE_FORWARD_ERR (1 << 25) /*WC*/
6562 #define PXPCS_TL_CONTROL_5_TTX_TXINTF_OVERFLOW (1 << 24) /*WC*/
6563 #define PXPCS_TL_CONTROL_5_PHY_ERR_ATTN (1 << 23) /*RO*/
6564 #define PXPCS_TL_CONTROL_5_DL_ERR_ATTN (1 << 22) /*RO*/
6565 #define PXPCS_TL_CONTROL_5_TTX_ERR_NP_TAG_IN_USE (1 << 21) /*WC*/
6566 #define PXPCS_TL_CONTROL_5_TRX_ERR_UNEXP_RTAG (1 << 20) /*WC*/
6567 #define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT1 (1 << 19) /*WC*/
6568 #define PXPCS_TL_CONTROL_5_ERR_UNSPPORT1 (1 << 18) /*WC*/
6569 #define PXPCS_TL_CONTROL_5_ERR_ECRC1 (1 << 17) /*WC*/
6570 #define PXPCS_TL_CONTROL_5_ERR_MALF_TLP1 (1 << 16) /*WC*/
6571 #define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW1 (1 << 15) /*WC*/
6572 #define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL1 (1 << 14) /*WC*/
6573 #define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT1 (1 << 13) /*WC*/
6574 #define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT1 (1 << 12) /*WC*/
6575 #define PXPCS_TL_CONTROL_5_ERR_FC_PRTL1 (1 << 11) /*WC*/
6576 #define PXPCS_TL_CONTROL_5_ERR_PSND_TLP1 (1 << 10) /*WC*/
6577 #define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT (1 << 9) /*WC*/
6578 #define PXPCS_TL_CONTROL_5_ERR_UNSPPORT (1 << 8) /*WC*/
6579 #define PXPCS_TL_CONTROL_5_ERR_ECRC (1 << 7) /*WC*/
6580 #define PXPCS_TL_CONTROL_5_ERR_MALF_TLP (1 << 6) /*WC*/
6581 #define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW (1 << 5) /*WC*/
6582 #define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL (1 << 4) /*WC*/
6583 #define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT (1 << 3) /*WC*/
6584 #define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT (1 << 2) /*WC*/
6585 #define PXPCS_TL_CONTROL_5_ERR_FC_PRTL (1 << 1) /*WC*/
6586 #define PXPCS_TL_CONTROL_5_ERR_PSND_TLP (1 << 0) /*WC*/
6587
6588
6589 #define PXPCS_TL_FUNC345_STAT 0x854
6590 #define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT4 (1 << 29) /* WC */
6591 #define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4\
6592 (1 << 28) /* Unsupported Request Error Status in function4, if \
6593 set, generate pcie_err_attn output when this error is seen. WC */
6594 #define PXPCS_TL_FUNC345_STAT_ERR_ECRC4\
6595 (1 << 27) /* ECRC Error TLP Status Status in function 4, if set, \
6596 generate pcie_err_attn output when this error is seen.. WC */
6597 #define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP4\
6598 (1 << 26) /* Malformed TLP Status Status in function 4, if set, \
6599 generate pcie_err_attn output when this error is seen.. WC */
6600 #define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW4\
6601 (1 << 25) /* Receiver Overflow Status Status in function 4, if \
6602 set, generate pcie_err_attn output when this error is seen.. WC \
6603 */
6604 #define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL4\
6605 (1 << 24) /* Unexpected Completion Status Status in function 4, \
6606 if set, generate pcie_err_attn output when this error is seen. WC \
6607 */
6608 #define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT4\
6609 (1 << 23) /* Receive UR Statusin function 4. If set, generate \
6610 pcie_err_attn output when this error is seen. WC */
6611 #define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT4\
6612 (1 << 22) /* Completer Timeout Status Status in function 4, if \
6613 set, generate pcie_err_attn output when this error is seen. WC */
6614 #define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL4\
6615 (1 << 21) /* Flow Control Protocol Error Status Status in \
6616 function 4, if set, generate pcie_err_attn output when this error \
6617 is seen. WC */
6618 #define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP4\
6619 (1 << 20) /* Poisoned Error Status Status in function 4, if set, \
6620 generate pcie_err_attn output when this error is seen.. WC */
6621 #define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT3 (1 << 19) /* WC */
6622 #define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3\
6623 (1 << 18) /* Unsupported Request Error Status in function3, if \
6624 set, generate pcie_err_attn output when this error is seen. WC */
6625 #define PXPCS_TL_FUNC345_STAT_ERR_ECRC3\
6626 (1 << 17) /* ECRC Error TLP Status Status in function 3, if set, \
6627 generate pcie_err_attn output when this error is seen.. WC */
6628 #define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP3\
6629 (1 << 16) /* Malformed TLP Status Status in function 3, if set, \
6630 generate pcie_err_attn output when this error is seen.. WC */
6631 #define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW3\
6632 (1 << 15) /* Receiver Overflow Status Status in function 3, if \
6633 set, generate pcie_err_attn output when this error is seen.. WC \
6634 */
6635 #define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL3\
6636 (1 << 14) /* Unexpected Completion Status Status in function 3, \
6637 if set, generate pcie_err_attn output when this error is seen. WC \
6638 */
6639 #define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT3\
6640 (1 << 13) /* Receive UR Statusin function 3. If set, generate \
6641 pcie_err_attn output when this error is seen. WC */
6642 #define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT3\
6643 (1 << 12) /* Completer Timeout Status Status in function 3, if \
6644 set, generate pcie_err_attn output when this error is seen. WC */
6645 #define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL3\
6646 (1 << 11) /* Flow Control Protocol Error Status Status in \
6647 function 3, if set, generate pcie_err_attn output when this error \
6648 is seen. WC */
6649 #define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP3\
6650 (1 << 10) /* Poisoned Error Status Status in function 3, if set, \
6651 generate pcie_err_attn output when this error is seen.. WC */
6652 #define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT2 (1 << 9) /* WC */
6653 #define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2\
6654 (1 << 8) /* Unsupported Request Error Status for Function 2, if \
6655 set, generate pcie_err_attn output when this error is seen. WC */
6656 #define PXPCS_TL_FUNC345_STAT_ERR_ECRC2\
6657 (1 << 7) /* ECRC Error TLP Status Status for Function 2, if set, \
6658 generate pcie_err_attn output when this error is seen.. WC */
6659 #define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP2\
6660 (1 << 6) /* Malformed TLP Status Status for Function 2, if set, \
6661 generate pcie_err_attn output when this error is seen.. WC */
6662 #define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW2\
6663 (1 << 5) /* Receiver Overflow Status Status for Function 2, if \
6664 set, generate pcie_err_attn output when this error is seen.. WC \
6665 */
6666 #define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL2\
6667 (1 << 4) /* Unexpected Completion Status Status for Function 2, \
6668 if set, generate pcie_err_attn output when this error is seen. WC \
6669 */
6670 #define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT2\
6671 (1 << 3) /* Receive UR Statusfor Function 2. If set, generate \
6672 pcie_err_attn output when this error is seen. WC */
6673 #define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT2\
6674 (1 << 2) /* Completer Timeout Status Status for Function 2, if \
6675 set, generate pcie_err_attn output when this error is seen. WC */
6676 #define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL2\
6677 (1 << 1) /* Flow Control Protocol Error Status Status for \
6678 Function 2, if set, generate pcie_err_attn output when this error \
6679 is seen. WC */
6680 #define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP2\
6681 (1 << 0) /* Poisoned Error Status Status for Function 2, if set, \
6682 generate pcie_err_attn output when this error is seen.. WC */
6683
6684
6685 #define PXPCS_TL_FUNC678_STAT 0x85C
6686 #define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT7 (1 << 29) /* WC */
6687 #define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7\
6688 (1 << 28) /* Unsupported Request Error Status in function7, if \
6689 set, generate pcie_err_attn output when this error is seen. WC */
6690 #define PXPCS_TL_FUNC678_STAT_ERR_ECRC7\
6691 (1 << 27) /* ECRC Error TLP Status Status in function 7, if set, \
6692 generate pcie_err_attn output when this error is seen.. WC */
6693 #define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP7\
6694 (1 << 26) /* Malformed TLP Status Status in function 7, if set, \
6695 generate pcie_err_attn output when this error is seen.. WC */
6696 #define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW7\
6697 (1 << 25) /* Receiver Overflow Status Status in function 7, if \
6698 set, generate pcie_err_attn output when this error is seen.. WC \
6699 */
6700 #define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL7\
6701 (1 << 24) /* Unexpected Completion Status Status in function 7, \
6702 if set, generate pcie_err_attn output when this error is seen. WC \
6703 */
6704 #define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT7\
6705 (1 << 23) /* Receive UR Statusin function 7. If set, generate \
6706 pcie_err_attn output when this error is seen. WC */
6707 #define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT7\
6708 (1 << 22) /* Completer Timeout Status Status in function 7, if \
6709 set, generate pcie_err_attn output when this error is seen. WC */
6710 #define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL7\
6711 (1 << 21) /* Flow Control Protocol Error Status Status in \
6712 function 7, if set, generate pcie_err_attn output when this error \
6713 is seen. WC */
6714 #define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP7\
6715 (1 << 20) /* Poisoned Error Status Status in function 7, if set, \
6716 generate pcie_err_attn output when this error is seen.. WC */
6717 #define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT6 (1 << 19) /* WC */
6718 #define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6\
6719 (1 << 18) /* Unsupported Request Error Status in function6, if \
6720 set, generate pcie_err_attn output when this error is seen. WC */
6721 #define PXPCS_TL_FUNC678_STAT_ERR_ECRC6\
6722 (1 << 17) /* ECRC Error TLP Status Status in function 6, if set, \
6723 generate pcie_err_attn output when this error is seen.. WC */
6724 #define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP6\
6725 (1 << 16) /* Malformed TLP Status Status in function 6, if set, \
6726 generate pcie_err_attn output when this error is seen.. WC */
6727 #define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW6\
6728 (1 << 15) /* Receiver Overflow Status Status in function 6, if \
6729 set, generate pcie_err_attn output when this error is seen.. WC \
6730 */
6731 #define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL6\
6732 (1 << 14) /* Unexpected Completion Status Status in function 6, \
6733 if set, generate pcie_err_attn output when this error is seen. WC \
6734 */
6735 #define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT6\
6736 (1 << 13) /* Receive UR Statusin function 6. If set, generate \
6737 pcie_err_attn output when this error is seen. WC */
6738 #define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT6\
6739 (1 << 12) /* Completer Timeout Status Status in function 6, if \
6740 set, generate pcie_err_attn output when this error is seen. WC */
6741 #define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL6\
6742 (1 << 11) /* Flow Control Protocol Error Status Status in \
6743 function 6, if set, generate pcie_err_attn output when this error \
6744 is seen. WC */
6745 #define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP6\
6746 (1 << 10) /* Poisoned Error Status Status in function 6, if set, \
6747 generate pcie_err_attn output when this error is seen.. WC */
6748 #define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT5 (1 << 9) /* WC */
6749 #define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5\
6750 (1 << 8) /* Unsupported Request Error Status for Function 5, if \
6751 set, generate pcie_err_attn output when this error is seen. WC */
6752 #define PXPCS_TL_FUNC678_STAT_ERR_ECRC5\
6753 (1 << 7) /* ECRC Error TLP Status Status for Function 5, if set, \
6754 generate pcie_err_attn output when this error is seen.. WC */
6755 #define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP5\
6756 (1 << 6) /* Malformed TLP Status Status for Function 5, if set, \
6757 generate pcie_err_attn output when this error is seen.. WC */
6758 #define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW5\
6759 (1 << 5) /* Receiver Overflow Status Status for Function 5, if \
6760 set, generate pcie_err_attn output when this error is seen.. WC \
6761 */
6762 #define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL5\
6763 (1 << 4) /* Unexpected Completion Status Status for Function 5, \
6764 if set, generate pcie_err_attn output when this error is seen. WC \
6765 */
6766 #define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT5\
6767 (1 << 3) /* Receive UR Statusfor Function 5. If set, generate \
6768 pcie_err_attn output when this error is seen. WC */
6769 #define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT5\
6770 (1 << 2) /* Completer Timeout Status Status for Function 5, if \
6771 set, generate pcie_err_attn output when this error is seen. WC */
6772 #define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL5\
6773 (1 << 1) /* Flow Control Protocol Error Status Status for \
6774 Function 5, if set, generate pcie_err_attn output when this error \
6775 is seen. WC */
6776 #define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP5\
6777 (1 << 0) /* Poisoned Error Status Status for Function 5, if set, \
6778 generate pcie_err_attn output when this error is seen.. WC */
6779
6780
6781 #define BAR_USTRORM_INTMEM 0x400000
6782 #define BAR_CSTRORM_INTMEM 0x410000
6783 #define BAR_XSTRORM_INTMEM 0x420000
6784 #define BAR_TSTRORM_INTMEM 0x430000
6785
6786 /* for accessing the IGU in case of status block ACK */
6787 #define BAR_IGU_INTMEM 0x440000
6788
6789 #define BAR_DOORBELL_OFFSET 0x800000
6790
6791 #define BAR_ME_REGISTER 0x450000
6792 #define ME_REG_PF_NUM_SHIFT 0
6793 #define ME_REG_PF_NUM\
6794 (7L<<ME_REG_PF_NUM_SHIFT) /* Relative PF Num */
6795 #define ME_REG_VF_VALID (1<<8)
6796 #define ME_REG_VF_NUM_SHIFT 9
6797 #define ME_REG_VF_NUM_MASK (0x3f<<ME_REG_VF_NUM_SHIFT)
6798 #define ME_REG_VF_ERR (0x1<<3)
6799 #define ME_REG_ABS_PF_NUM_SHIFT 16
6800 #define ME_REG_ABS_PF_NUM\
6801 (7L<<ME_REG_ABS_PF_NUM_SHIFT) /* Absolute PF Num */
6802
6803
6804 #define PXP_VF_ADDR_IGU_START 0
6805 #define PXP_VF_ADDR_IGU_SIZE 0x3000
6806 #define PXP_VF_ADDR_IGU_END\
6807 ((PXP_VF_ADDR_IGU_START) + (PXP_VF_ADDR_IGU_SIZE) - 1)
6808
6809 #define PXP_VF_ADDR_USDM_QUEUES_START 0x3000
6810 #define PXP_VF_ADDR_USDM_QUEUES_SIZE\
6811 (PXP_VF_ADRR_NUM_QUEUES * PXP_ADDR_QUEUE_SIZE)
6812 #define PXP_VF_ADDR_USDM_QUEUES_END\
6813 ((PXP_VF_ADDR_USDM_QUEUES_START) + (PXP_VF_ADDR_USDM_QUEUES_SIZE) - 1)
6814
6815 #define PXP_VF_ADDR_CSDM_GLOBAL_START 0x7600
6816 #define PXP_VF_ADDR_CSDM_GLOBAL_SIZE (PXP_ADDR_REG_SIZE)
6817 #define PXP_VF_ADDR_CSDM_GLOBAL_END\
6818 ((PXP_VF_ADDR_CSDM_GLOBAL_START) + (PXP_VF_ADDR_CSDM_GLOBAL_SIZE) - 1)
6819
6820 #define PXP_VF_ADDR_DB_START 0x7c00
6821 #define PXP_VF_ADDR_DB_SIZE 0x200
6822 #define PXP_VF_ADDR_DB_END\
6823 ((PXP_VF_ADDR_DB_START) + (PXP_VF_ADDR_DB_SIZE) - 1)
6824
6825 #define MDIO_REG_BANK_CL73_IEEEB0 0x0
6826 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0
6827 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200
6828 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000
6829 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000
6830
6831 #define MDIO_REG_BANK_CL73_IEEEB1 0x10
6832 #define MDIO_CL73_IEEEB1_AN_ADV1 0x00
6833 #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE 0x0400
6834 #define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC 0x0800
6835 #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH 0x0C00
6836 #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK 0x0C00
6837 #define MDIO_CL73_IEEEB1_AN_ADV2 0x01
6838 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000
6839 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020
6840 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040
6841 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080
6842 #define MDIO_CL73_IEEEB1_AN_LP_ADV1 0x03
6843 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE 0x0400
6844 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC 0x0800
6845 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH 0x0C00
6846 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK 0x0C00
6847 #define MDIO_CL73_IEEEB1_AN_LP_ADV2 0x04
6848
6849 #define MDIO_REG_BANK_RX0 0x80b0
6850 #define MDIO_RX0_RX_STATUS 0x10
6851 #define MDIO_RX0_RX_STATUS_SIGDET 0x8000
6852 #define MDIO_RX0_RX_STATUS_RX_SEQ_DONE 0x1000
6853 #define MDIO_RX0_RX_EQ_BOOST 0x1c
6854 #define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
6855 #define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10
6856
6857 #define MDIO_REG_BANK_RX1 0x80c0
6858 #define MDIO_RX1_RX_EQ_BOOST 0x1c
6859 #define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
6860 #define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10
6861
6862 #define MDIO_REG_BANK_RX2 0x80d0
6863 #define MDIO_RX2_RX_EQ_BOOST 0x1c
6864 #define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
6865 #define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10
6866
6867 #define MDIO_REG_BANK_RX3 0x80e0
6868 #define MDIO_RX3_RX_EQ_BOOST 0x1c
6869 #define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
6870 #define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10
6871
6872 #define MDIO_REG_BANK_RX_ALL 0x80f0
6873 #define MDIO_RX_ALL_RX_EQ_BOOST 0x1c
6874 #define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
6875 #define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10
6876
6877 #define MDIO_REG_BANK_TX0 0x8060
6878 #define MDIO_TX0_TX_DRIVER 0x17
6879 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
6880 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
6881 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
6882 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
6883 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
6884 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
6885 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
6886 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
6887 #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
6888
6889 #define MDIO_REG_BANK_TX1 0x8070
6890 #define MDIO_TX1_TX_DRIVER 0x17
6891 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
6892 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
6893 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
6894 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
6895 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
6896 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
6897 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
6898 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
6899 #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
6900
6901 #define MDIO_REG_BANK_TX2 0x8080
6902 #define MDIO_TX2_TX_DRIVER 0x17
6903 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
6904 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
6905 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
6906 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
6907 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
6908 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
6909 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
6910 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
6911 #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
6912
6913 #define MDIO_REG_BANK_TX3 0x8090
6914 #define MDIO_TX3_TX_DRIVER 0x17
6915 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
6916 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
6917 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
6918 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
6919 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
6920 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
6921 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
6922 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
6923 #define MDIO_TX0_TX_DRIVER_ICBUF1T 1
6924
6925 #define MDIO_REG_BANK_XGXS_BLOCK0 0x8000
6926 #define MDIO_BLOCK0_XGXS_CONTROL 0x10
6927
6928 #define MDIO_REG_BANK_XGXS_BLOCK1 0x8010
6929 #define MDIO_BLOCK1_LANE_CTRL0 0x15
6930 #define MDIO_BLOCK1_LANE_CTRL1 0x16
6931 #define MDIO_BLOCK1_LANE_CTRL2 0x17
6932 #define MDIO_BLOCK1_LANE_PRBS 0x19
6933
6934 #define MDIO_REG_BANK_XGXS_BLOCK2 0x8100
6935 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10
6936 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000
6937 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000
6938 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
6939 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000
6940 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14
6941 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001
6942 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010
6943 #define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
6944
6945 #define MDIO_REG_BANK_GP_STATUS 0x8120
6946 #define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B
6947 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001
6948 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002
6949 #define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004
6950 #define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008
6951 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010
6952 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020
6953 #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040
6954 #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080
6955 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00
6956 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000
6957 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100
6958 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200
6959 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300
6960 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400
6961 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500
6962 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600
6963 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700
6964 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800
6965 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900
6966 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00
6967 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00
6968 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00
6969 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00
6970 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00
6971 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR 0x0F00
6972 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI 0x1B00
6973 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS 0x1E00
6974 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI 0x1F00
6975 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2 0x3900
6976
6977
6978 #define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130
6979 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS 0x10
6980 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK 0x8000
6981 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11
6982 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1
6983 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13
6984 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1)
6985
6986 #define MDIO_REG_BANK_SERDES_DIGITAL 0x8300
6987 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10
6988 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001
6989 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002
6990 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004
6991 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008
6992 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010
6993 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020
6994 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11
6995 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001
6996 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040
6997 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14
6998 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SGMII 0x0001
6999 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_LINK 0x0002
7000 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004
7001 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018
7002 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3
7003 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018
7004 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010
7005 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008
7006 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000
7007 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS2 0x15
7008 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED 0x0002
7009 #define MDIO_SERDES_DIGITAL_MISC1 0x18
7010 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000
7011 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000
7012 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000
7013 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000
7014 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000
7015 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000
7016 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010
7017 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f
7018 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000
7019 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001
7020 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002
7021 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003
7022 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004
7023 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005
7024 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006
7025 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007
7026 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008
7027 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009
7028
7029 #define MDIO_REG_BANK_OVER_1G 0x8320
7030 #define MDIO_OVER_1G_DIGCTL_3_4 0x14
7031 #define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0
7032 #define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5
7033 #define MDIO_OVER_1G_UP1 0x19
7034 #define MDIO_OVER_1G_UP1_2_5G 0x0001
7035 #define MDIO_OVER_1G_UP1_5G 0x0002
7036 #define MDIO_OVER_1G_UP1_6G 0x0004
7037 #define MDIO_OVER_1G_UP1_10G 0x0010
7038 #define MDIO_OVER_1G_UP1_10GH 0x0008
7039 #define MDIO_OVER_1G_UP1_12G 0x0020
7040 #define MDIO_OVER_1G_UP1_12_5G 0x0040
7041 #define MDIO_OVER_1G_UP1_13G 0x0080
7042 #define MDIO_OVER_1G_UP1_15G 0x0100
7043 #define MDIO_OVER_1G_UP1_16G 0x0200
7044 #define MDIO_OVER_1G_UP2 0x1A
7045 #define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007
7046 #define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038
7047 #define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0
7048 #define MDIO_OVER_1G_UP3 0x1B
7049 #define MDIO_OVER_1G_UP3_HIGIG2 0x0001
7050 #define MDIO_OVER_1G_LP_UP1 0x1C
7051 #define MDIO_OVER_1G_LP_UP2 0x1D
7052 #define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff
7053 #define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780
7054 #define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7
7055 #define MDIO_OVER_1G_LP_UP3 0x1E
7056
7057 #define MDIO_REG_BANK_REMOTE_PHY 0x8330
7058 #define MDIO_REMOTE_PHY_MISC_RX_STATUS 0x10
7059 #define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG 0x0010
7060 #define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG 0x0600
7061
7062 #define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350
7063 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10
7064 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001
7065 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002
7066
7067 #define MDIO_REG_BANK_CL73_USERB0 0x8370
7068 #define MDIO_CL73_USERB0_CL73_UCTRL 0x10
7069 #define MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL 0x0002
7070 #define MDIO_CL73_USERB0_CL73_USTAT1 0x11
7071 #define MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK 0x0100
7072 #define MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37 0x0400
7073 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12
7074 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000
7075 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000
7076 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000
7077 #define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14
7078 #define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001
7079
7080 #define MDIO_REG_BANK_AER_BLOCK 0xFFD0
7081 #define MDIO_AER_BLOCK_AER_REG 0x1E
7082
7083 #define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0
7084 #define MDIO_COMBO_IEEE0_MII_CONTROL 0x10
7085 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040
7086 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000
7087 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000
7088 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040
7089 #define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100
7090 #define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200
7091 #define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000
7092 #define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000
7093 #define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000
7094 #define MDIO_COMBO_IEEE0_MII_STATUS 0x11
7095 #define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004
7096 #define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020
7097 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14
7098 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020
7099 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040
7100 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180
7101 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000
7102 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080
7103 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100
7104 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180
7105 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000
7106 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15
7107 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000
7108 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000
7109 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180
7110 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE 0x0000
7111 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH 0x0180
7112 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040
7113 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020
7114 /*WhenthelinkpartnerisinSGMIImode(bit0=1),then
7115 bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge.
7116 Theotherbitsarereservedandshouldbezero*/
7117 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001
7118
7119
7120 #define MDIO_PMA_DEVAD 0x1
7121 /*ieee*/
7122 #define MDIO_PMA_REG_CTRL 0x0
7123 #define MDIO_PMA_REG_STATUS 0x1
7124 #define MDIO_PMA_REG_10G_CTRL2 0x7
7125 #define MDIO_PMA_REG_TX_DISABLE 0x0009
7126 #define MDIO_PMA_REG_RX_SD 0xa
7127 /*bcm*/
7128 #define MDIO_PMA_REG_BCM_CTRL 0x0096
7129 #define MDIO_PMA_REG_FEC_CTRL 0x00ab
7130 #define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800
7131 #define MDIO_PMA_REG_DIGITAL_CTRL 0xc808
7132 #define MDIO_PMA_REG_DIGITAL_STATUS 0xc809
7133 #define MDIO_PMA_REG_TX_POWER_DOWN 0xca02
7134 #define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09
7135 #define MDIO_PMA_REG_MISC_CTRL 0xca0a
7136 #define MDIO_PMA_REG_GEN_CTRL 0xca10
7137 #define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188
7138 #define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a
7139 #define MDIO_PMA_REG_M8051_MSGIN_REG 0xca12
7140 #define MDIO_PMA_REG_M8051_MSGOUT_REG 0xca13
7141 #define MDIO_PMA_REG_ROM_VER1 0xca19
7142 #define MDIO_PMA_REG_ROM_VER2 0xca1a
7143 #define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b
7144 #define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d
7145 #define MDIO_PMA_REG_PLL_CTRL 0xca1e
7146 #define MDIO_PMA_REG_MISC_CTRL0 0xca23
7147 #define MDIO_PMA_REG_LRM_MODE 0xca3f
7148 #define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46
7149 #define MDIO_PMA_REG_MISC_CTRL1 0xca85
7150
7151 #define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL 0x8000
7152 #define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK 0x000c
7153 #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE 0x0000
7154 #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE 0x0004
7155 #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS 0x0008
7156 #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED 0x000c
7157 #define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT 0x8002
7158 #define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR 0x8003
7159 #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820
7160 #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff
7161 #define MDIO_PMA_REG_8726_TX_CTRL1 0xca01
7162 #define MDIO_PMA_REG_8726_TX_CTRL2 0xca05
7163
7164 #define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005
7165 #define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007
7166 #define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff
7167 #define MDIO_PMA_REG_8727_TX_CTRL1 0xca02
7168 #define MDIO_PMA_REG_8727_TX_CTRL2 0xca05
7169 #define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808
7170 #define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e
7171 #define MDIO_PMA_REG_8727_PCS_GP 0xc842
7172 #define MDIO_PMA_REG_8727_OPT_CFG_REG 0xc8e4
7173
7174 #define MDIO_AN_REG_8727_MISC_CTRL 0x8309
7175
7176 #define MDIO_PMA_REG_8073_CHIP_REV 0xc801
7177 #define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820
7178 #define MDIO_PMA_REG_8073_XAUI_WA 0xc841
7179 #define MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL 0xcd08
7180
7181 #define MDIO_PMA_REG_7101_RESET 0xc000
7182 #define MDIO_PMA_REG_7107_LED_CNTL 0xc007
7183 #define MDIO_PMA_REG_7107_LINK_LED_CNTL 0xc009
7184 #define MDIO_PMA_REG_7101_VER1 0xc026
7185 #define MDIO_PMA_REG_7101_VER2 0xc027
7186
7187 #define MDIO_PMA_REG_8481_PMD_SIGNAL 0xa811
7188 #define MDIO_PMA_REG_8481_LED1_MASK 0xa82c
7189 #define MDIO_PMA_REG_8481_LED2_MASK 0xa82f
7190 #define MDIO_PMA_REG_8481_LED3_MASK 0xa832
7191 #define MDIO_PMA_REG_8481_LED3_BLINK 0xa834
7192 #define MDIO_PMA_REG_8481_LED5_MASK 0xa838
7193 #define MDIO_PMA_REG_8481_SIGNAL_MASK 0xa835
7194 #define MDIO_PMA_REG_8481_LINK_SIGNAL 0xa83b
7195 #define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK 0x800
7196 #define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT 11
7197
7198
7199 #define MDIO_WIS_DEVAD 0x2
7200 /*bcm*/
7201 #define MDIO_WIS_REG_LASI_CNTL 0x9002
7202 #define MDIO_WIS_REG_LASI_STATUS 0x9005
7203
7204 #define MDIO_PCS_DEVAD 0x3
7205 #define MDIO_PCS_REG_STATUS 0x0020
7206 #define MDIO_PCS_REG_LASI_STATUS 0x9005
7207 #define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000
7208 #define MDIO_PCS_REG_7101_SPI_MUX 0xD008
7209 #define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A
7210 #define MDIO_PCS_REG_7101_SPI_RESET_BIT (5)
7211 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A
7212 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6)
7213 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7)
7214 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2)
7215 #define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028
7216
7217
7218 #define MDIO_XS_DEVAD 0x4
7219 #define MDIO_XS_PLL_SEQUENCER 0x8000
7220 #define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a
7221
7222 #define MDIO_XS_8706_REG_BANK_RX0 0x80bc
7223 #define MDIO_XS_8706_REG_BANK_RX1 0x80cc
7224 #define MDIO_XS_8706_REG_BANK_RX2 0x80dc
7225 #define MDIO_XS_8706_REG_BANK_RX3 0x80ec
7226 #define MDIO_XS_8706_REG_BANK_RXA 0x80fc
7227
7228 #define MDIO_XS_REG_8073_RX_CTRL_PCIE 0x80FA
7229
7230 #define MDIO_AN_DEVAD 0x7
7231 /*ieee*/
7232 #define MDIO_AN_REG_CTRL 0x0000
7233 #define MDIO_AN_REG_STATUS 0x0001
7234 #define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020
7235 #define MDIO_AN_REG_ADV_PAUSE 0x0010
7236 #define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400
7237 #define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800
7238 #define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00
7239 #define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00
7240 #define MDIO_AN_REG_ADV 0x0011
7241 #define MDIO_AN_REG_ADV2 0x0012
7242 #define MDIO_AN_REG_LP_AUTO_NEG 0x0013
7243 #define MDIO_AN_REG_LP_AUTO_NEG2 0x0014
7244 #define MDIO_AN_REG_MASTER_STATUS 0x0021
7245 #define MDIO_AN_REG_EEE_ADV 0x003c
7246 #define MDIO_AN_REG_LP_EEE_ADV 0x003d
7247 /*bcm*/
7248 #define MDIO_AN_REG_LINK_STATUS 0x8304
7249 #define MDIO_AN_REG_CL37_CL73 0x8370
7250 #define MDIO_AN_REG_CL37_AN 0xffe0
7251 #define MDIO_AN_REG_CL37_FC_LD 0xffe4
7252 #define MDIO_AN_REG_CL37_FC_LP 0xffe5
7253 #define MDIO_AN_REG_1000T_STATUS 0xffea
7254
7255 #define MDIO_AN_REG_8073_2_5G 0x8329
7256 #define MDIO_AN_REG_8073_BAM 0x8350
7257
7258 #define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL 0x0020
7259 #define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0
7260 #define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G 0x40
7261 #define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1
7262 #define MDIO_AN_REG_848xx_ID_MSB 0xffe2
7263 #define BCM84858_PHY_ID 0x600d
7264 #define MDIO_AN_REG_848xx_ID_LSB 0xffe3
7265 #define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4
7266 #define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6
7267 #define MDIO_AN_REG_8481_1000T_CTRL 0xffe9
7268 #define MDIO_AN_REG_8481_1G_100T_EXT_CTRL 0xfff0
7269 #define MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF 0x0008
7270 #define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5
7271 #define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7
7272 #define MDIO_AN_REG_8481_AUX_CTRL 0xfff8
7273 #define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc
7274
7275 /* BCM84823 only */
7276 #define MDIO_CTL_DEVAD 0x1e
7277 #define MDIO_CTL_REG_84823_MEDIA 0x401a
7278 #define MDIO_CTL_REG_84823_MEDIA_MAC_MASK 0x0018
7279 /* These pins configure the BCM84823 interface to MAC after reset. */
7280 #define MDIO_CTL_REG_84823_CTRL_MAC_XFI 0x0008
7281 #define MDIO_CTL_REG_84823_MEDIA_MAC_XAUI_M 0x0010
7282 /* These pins configure the BCM84823 interface to Line after reset. */
7283 #define MDIO_CTL_REG_84823_MEDIA_LINE_MASK 0x0060
7284 #define MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L 0x0020
7285 #define MDIO_CTL_REG_84823_MEDIA_LINE_XFI 0x0040
7286 /* When this pin is active high during reset, 10GBASE-T core is power
7287 * down, When it is active low the 10GBASE-T is power up
7288 */
7289 #define MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN 0x0080
7290 #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK 0x0100
7291 #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000
7292 #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100
7293 #define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000
7294 #define MDIO_CTL_REG_84823_USER_CTRL_REG 0x4005
7295 #define MDIO_CTL_REG_84823_USER_CTRL_CMS 0x0080
7296 #define MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH 0xa82b
7297 #define MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ 0x2f
7298 #define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3
7299 #define MDIO_PMA_REG_84833_CTL_LED_CTL_1 0xa8ec
7300 #define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080
7301 /* BCM84858 only */
7302 #define MDIO_PMA_REG_84858_ALLOW_GPHY_ACT 0x8000
7303
7304 /* BCM84833 only */
7305 #define MDIO_84833_TOP_CFG_FW_REV 0x400f
7306 #define MDIO_84833_TOP_CFG_FW_EEE 0x10b1
7307 #define MDIO_84833_TOP_CFG_FW_NO_EEE 0x1f81
7308 #define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a
7309 #define MDIO_84833_SUPER_ISOLATE 0x8000
7310 /* These are mailbox register set used by 84833/84858. */
7311 #define MDIO_848xx_TOP_CFG_SCRATCH_REG0 0x4005
7312 #define MDIO_848xx_TOP_CFG_SCRATCH_REG1 0x4006
7313 #define MDIO_848xx_TOP_CFG_SCRATCH_REG2 0x4007
7314 #define MDIO_848xx_TOP_CFG_SCRATCH_REG3 0x4008
7315 #define MDIO_848xx_TOP_CFG_SCRATCH_REG4 0x4009
7316 #define MDIO_848xx_TOP_CFG_SCRATCH_REG26 0x4037
7317 #define MDIO_848xx_TOP_CFG_SCRATCH_REG27 0x4038
7318 #define MDIO_848xx_TOP_CFG_SCRATCH_REG28 0x4039
7319 #define MDIO_848xx_TOP_CFG_SCRATCH_REG29 0x403a
7320 #define MDIO_848xx_TOP_CFG_SCRATCH_REG30 0x403b
7321 #define MDIO_848xx_TOP_CFG_SCRATCH_REG31 0x403c
7322 #define MDIO_848xx_CMD_HDLR_COMMAND (MDIO_848xx_TOP_CFG_SCRATCH_REG0)
7323 #define MDIO_848xx_CMD_HDLR_STATUS (MDIO_848xx_TOP_CFG_SCRATCH_REG26)
7324 #define MDIO_848xx_CMD_HDLR_DATA1 (MDIO_848xx_TOP_CFG_SCRATCH_REG27)
7325 #define MDIO_848xx_CMD_HDLR_DATA2 (MDIO_848xx_TOP_CFG_SCRATCH_REG28)
7326 #define MDIO_848xx_CMD_HDLR_DATA3 (MDIO_848xx_TOP_CFG_SCRATCH_REG29)
7327 #define MDIO_848xx_CMD_HDLR_DATA4 (MDIO_848xx_TOP_CFG_SCRATCH_REG30)
7328 #define MDIO_848xx_CMD_HDLR_DATA5 (MDIO_848xx_TOP_CFG_SCRATCH_REG31)
7329
7330 /* Mailbox command set used by 84833/84858 */
7331 #define PHY848xx_CMD_SET_PAIR_SWAP 0x8001
7332 #define PHY848xx_CMD_GET_EEE_MODE 0x8008
7333 #define PHY848xx_CMD_SET_EEE_MODE 0x8009
7334 /* Mailbox status set used by 84833 only */
7335 #define PHY84833_STATUS_CMD_RECEIVED 0x0001
7336 #define PHY84833_STATUS_CMD_IN_PROGRESS 0x0002
7337 #define PHY84833_STATUS_CMD_COMPLETE_PASS 0x0004
7338 #define PHY84833_STATUS_CMD_COMPLETE_ERROR 0x0008
7339 #define PHY84833_STATUS_CMD_OPEN_FOR_CMDS 0x0010
7340 #define PHY84833_STATUS_CMD_SYSTEM_BOOT 0x0020
7341 #define PHY84833_STATUS_CMD_NOT_OPEN_FOR_CMDS 0x0040
7342 #define PHY84833_STATUS_CMD_CLEAR_COMPLETE 0x0080
7343 #define PHY84833_STATUS_CMD_OPEN_OVERRIDE 0xa5a5
7344 /* Mailbox Process */
7345 #define PHY84833_MB_PROCESS1 1
7346 #define PHY84833_MB_PROCESS2 2
7347 #define PHY84833_MB_PROCESS3 3
7348
7349 /* Mailbox status set used by 84858 only */
7350 #define PHY84858_STATUS_CMD_RECEIVED 0x0001
7351 #define PHY84858_STATUS_CMD_IN_PROGRESS 0x0002
7352 #define PHY84858_STATUS_CMD_COMPLETE_PASS 0x0004
7353 #define PHY84858_STATUS_CMD_COMPLETE_ERROR 0x0008
7354 #define PHY84858_STATUS_CMD_SYSTEM_BUSY 0xbbbb
7355
7356
7357 /* Warpcore clause 45 addressing */
7358 #define MDIO_WC_DEVAD 0x3
7359 #define MDIO_WC_REG_IEEE0BLK_MIICNTL 0x0
7360 #define MDIO_WC_REG_IEEE0BLK_AUTONEGNP 0x7
7361 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT0 0x10
7362 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1 0x11
7363 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2 0x12
7364 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY 0x4000
7365 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ 0x8000
7366 #define MDIO_WC_REG_PCS_STATUS2 0x0021
7367 #define MDIO_WC_REG_PMD_KR_CONTROL 0x0096
7368 #define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL 0x8000
7369 #define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1 0x800e
7370 #define MDIO_WC_REG_XGXSBLK1_DESKEW 0x8010
7371 #define MDIO_WC_REG_XGXSBLK1_LANECTRL0 0x8015
7372 #define MDIO_WC_REG_XGXSBLK1_LANECTRL1 0x8016
7373 #define MDIO_WC_REG_XGXSBLK1_LANECTRL2 0x8017
7374 #define MDIO_WC_REG_TX0_ANA_CTRL0 0x8061
7375 #define MDIO_WC_REG_TX1_ANA_CTRL0 0x8071
7376 #define MDIO_WC_REG_TX2_ANA_CTRL0 0x8081
7377 #define MDIO_WC_REG_TX3_ANA_CTRL0 0x8091
7378 #define MDIO_WC_REG_TX0_TX_DRIVER 0x8067
7379 #define MDIO_WC_REG_TX0_TX_DRIVER_IFIR_OFFSET 0x01
7380 #define MDIO_WC_REG_TX0_TX_DRIVER_IFIR_MASK 0x000e
7381 #define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET 0x04
7382 #define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_MASK 0x00f0
7383 #define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET 0x08
7384 #define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
7385 #define MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET 0x0c
7386 #define MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_MASK 0x7000
7387 #define MDIO_WC_REG_TX1_TX_DRIVER 0x8077
7388 #define MDIO_WC_REG_TX2_TX_DRIVER 0x8087
7389 #define MDIO_WC_REG_TX3_TX_DRIVER 0x8097
7390 #define MDIO_WC_REG_RX0_ANARXCONTROL1G 0x80b9
7391 #define MDIO_WC_REG_RX2_ANARXCONTROL1G 0x80d9
7392 #define MDIO_WC_REG_RX0_PCI_CTRL 0x80ba
7393 #define MDIO_WC_REG_RX1_PCI_CTRL 0x80ca
7394 #define MDIO_WC_REG_RX2_PCI_CTRL 0x80da
7395 #define MDIO_WC_REG_RX3_PCI_CTRL 0x80ea
7396 #define MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI 0x80fa
7397 #define MDIO_WC_REG_XGXSBLK2_UNICORE_MODE_10G 0x8104
7398 #define MDIO_WC_REG_XGXS_STATUS3 0x8129
7399 #define MDIO_WC_REG_PAR_DET_10G_STATUS 0x8130
7400 #define MDIO_WC_REG_PAR_DET_10G_CTRL 0x8131
7401 #define MDIO_WC_REG_XGXS_X2_CONTROL2 0x8141
7402 #define MDIO_WC_REG_XGXS_X2_CONTROL3 0x8142
7403 #define MDIO_WC_REG_XGXS_RX_LN_SWAP1 0x816B
7404 #define MDIO_WC_REG_XGXS_TX_LN_SWAP1 0x8169
7405 #define MDIO_WC_REG_GP2_STATUS_GP_2_0 0x81d0
7406 #define MDIO_WC_REG_GP2_STATUS_GP_2_1 0x81d1
7407 #define MDIO_WC_REG_GP2_STATUS_GP_2_2 0x81d2
7408 #define MDIO_WC_REG_GP2_STATUS_GP_2_3 0x81d3
7409 #define MDIO_WC_REG_GP2_STATUS_GP_2_4 0x81d4
7410 #define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL 0x1000
7411 #define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CMPL 0x0100
7412 #define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP 0x0010
7413 #define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CAP 0x1
7414 #define MDIO_WC_REG_UC_INFO_B0_DEAD_TRAP 0x81EE
7415 #define MDIO_WC_REG_UC_INFO_B1_VERSION 0x81F0
7416 #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE 0x81F2
7417 #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE0_OFFSET 0x0
7418 #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT 0x0
7419 #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_OPT_LR 0x1
7420 #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC 0x2
7421 #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_XLAUI 0x3
7422 #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_LONG_CH_6G 0x4
7423 #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE1_OFFSET 0x4
7424 #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE2_OFFSET 0x8
7425 #define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE3_OFFSET 0xc
7426 #define MDIO_WC_REG_UC_INFO_B1_CRC 0x81FE
7427 #define MDIO_WC_REG_DSC_SMC 0x8213
7428 #define MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0 0x821e
7429 #define MDIO_WC_REG_TX_FIR_TAP 0x82e2
7430 #define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET 0x00
7431 #define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_MASK 0x000f
7432 #define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET 0x04
7433 #define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_MASK 0x03f0
7434 #define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET 0x0a
7435 #define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_MASK 0x7c00
7436 #define MDIO_WC_REG_TX_FIR_TAP_ENABLE 0x8000
7437 #define MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP 0x82e2
7438 #define MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL 0x82e3
7439 #define MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL 0x82e6
7440 #define MDIO_WC_REG_CL72_USERB0_CL72_BR_DEF_CTRL 0x82e7
7441 #define MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL 0x82e8
7442 #define MDIO_WC_REG_CL72_USERB0_CL72_MISC4_CONTROL 0x82ec
7443 #define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1 0x8300
7444 #define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2 0x8301
7445 #define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3 0x8302
7446 #define MDIO_WC_REG_SERDESDIGITAL_STATUS1000X1 0x8304
7447 #define MDIO_WC_REG_SERDESDIGITAL_MISC1 0x8308
7448 #define MDIO_WC_REG_SERDESDIGITAL_MISC2 0x8309
7449 #define MDIO_WC_REG_DIGITAL3_UP1 0x8329
7450 #define MDIO_WC_REG_DIGITAL3_LP_UP1 0x832c
7451 #define MDIO_WC_REG_DIGITAL4_MISC3 0x833c
7452 #define MDIO_WC_REG_DIGITAL4_MISC5 0x833e
7453 #define MDIO_WC_REG_DIGITAL5_MISC6 0x8345
7454 #define MDIO_WC_REG_DIGITAL5_MISC7 0x8349
7455 #define MDIO_WC_REG_DIGITAL5_LINK_STATUS 0x834d
7456 #define MDIO_WC_REG_DIGITAL5_ACTUAL_SPEED 0x834e
7457 #define MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL 0x8350
7458 #define MDIO_WC_REG_CL49_USERB0_CTRL 0x8368
7459 #define MDIO_WC_REG_CL73_USERB0_CTRL 0x8370
7460 #define MDIO_WC_REG_CL73_USERB0_USTAT 0x8371
7461 #define MDIO_WC_REG_CL73_BAM_CTRL1 0x8372
7462 #define MDIO_WC_REG_CL73_BAM_CTRL2 0x8373
7463 #define MDIO_WC_REG_CL73_BAM_CTRL3 0x8374
7464 #define MDIO_WC_REG_CL73_BAM_CODE_FIELD 0x837b
7465 #define MDIO_WC_REG_EEE_COMBO_CONTROL0 0x8390
7466 #define MDIO_WC_REG_TX66_CONTROL 0x83b0
7467 #define MDIO_WC_REG_RX66_CONTROL 0x83c0
7468 #define MDIO_WC_REG_RX66_SCW0 0x83c2
7469 #define MDIO_WC_REG_RX66_SCW1 0x83c3
7470 #define MDIO_WC_REG_RX66_SCW2 0x83c4
7471 #define MDIO_WC_REG_RX66_SCW3 0x83c5
7472 #define MDIO_WC_REG_RX66_SCW0_MASK 0x83c6
7473 #define MDIO_WC_REG_RX66_SCW1_MASK 0x83c7
7474 #define MDIO_WC_REG_RX66_SCW2_MASK 0x83c8
7475 #define MDIO_WC_REG_RX66_SCW3_MASK 0x83c9
7476 #define MDIO_WC_REG_FX100_CTRL1 0x8400
7477 #define MDIO_WC_REG_FX100_CTRL3 0x8402
7478 #define MDIO_WC_REG_CL82_USERB1_TX_CTRL5 0x8436
7479 #define MDIO_WC_REG_CL82_USERB1_TX_CTRL6 0x8437
7480 #define MDIO_WC_REG_CL82_USERB1_TX_CTRL7 0x8438
7481 #define MDIO_WC_REG_CL82_USERB1_TX_CTRL9 0x8439
7482 #define MDIO_WC_REG_CL82_USERB1_RX_CTRL10 0x843a
7483 #define MDIO_WC_REG_CL82_USERB1_RX_CTRL11 0x843b
7484 #define MDIO_WC_REG_ETA_CL73_OUI1 0x8453
7485 #define MDIO_WC_REG_ETA_CL73_OUI2 0x8454
7486 #define MDIO_WC_REG_ETA_CL73_OUI3 0x8455
7487 #define MDIO_WC_REG_ETA_CL73_LD_BAM_CODE 0x8456
7488 #define MDIO_WC_REG_ETA_CL73_LD_UD_CODE 0x8457
7489 #define MDIO_WC_REG_MICROBLK_CMD 0xffc2
7490 #define MDIO_WC_REG_MICROBLK_DL_STATUS 0xffc5
7491 #define MDIO_WC_REG_MICROBLK_CMD3 0xffcc
7492
7493 #define MDIO_WC_REG_AERBLK_AER 0xffde
7494 #define MDIO_WC_REG_COMBO_IEEE0_MIICTRL 0xffe0
7495 #define MDIO_WC_REG_COMBO_IEEE0_MIIISTAT 0xffe1
7496
7497 #define MDIO_WC0_XGXS_BLK2_LANE_RESET 0x810A
7498 #define MDIO_WC0_XGXS_BLK2_LANE_RESET_RX_BITSHIFT 0
7499 #define MDIO_WC0_XGXS_BLK2_LANE_RESET_TX_BITSHIFT 4
7500
7501 #define MDIO_WC0_XGXS_BLK6_XGXS_X2_CONTROL2 0x8141
7502
7503 #define DIGITAL5_ACTUAL_SPEED_TX_MASK 0x003f
7504
7505 /* 54618se */
7506 #define MDIO_REG_GPHY_PHYID_LSB 0x3
7507 #define MDIO_REG_GPHY_ID_54618SE 0x5cd5
7508 #define MDIO_REG_GPHY_CL45_ADDR_REG 0xd
7509 #define MDIO_REG_GPHY_CL45_DATA_REG 0xe
7510 #define MDIO_REG_GPHY_EEE_RESOLVED 0x803e
7511 #define MDIO_REG_GPHY_EXP_ACCESS_GATE 0x15
7512 #define MDIO_REG_GPHY_EXP_ACCESS 0x17
7513 #define MDIO_REG_GPHY_EXP_ACCESS_TOP 0xd00
7514 #define MDIO_REG_GPHY_EXP_TOP_2K_BUF 0x40
7515 #define MDIO_REG_GPHY_AUX_STATUS 0x19
7516 #define MDIO_REG_INTR_STATUS 0x1a
7517 #define MDIO_REG_INTR_MASK 0x1b
7518 #define MDIO_REG_INTR_MASK_LINK_STATUS (0x1 << 1)
7519 #define MDIO_REG_GPHY_SHADOW 0x1c
7520 #define MDIO_REG_GPHY_SHADOW_LED_SEL1 (0x0d << 10)
7521 #define MDIO_REG_GPHY_SHADOW_LED_SEL2 (0x0e << 10)
7522 #define MDIO_REG_GPHY_SHADOW_WR_ENA (0x1 << 15)
7523 #define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED (0x1e << 10)
7524 #define MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD (0x1 << 8)
7525
7526 #define IGU_FUNC_BASE 0x0400
7527
7528 #define IGU_ADDR_MSIX 0x0000
7529 #define IGU_ADDR_INT_ACK 0x0200
7530 #define IGU_ADDR_PROD_UPD 0x0201
7531 #define IGU_ADDR_ATTN_BITS_UPD 0x0202
7532 #define IGU_ADDR_ATTN_BITS_SET 0x0203
7533 #define IGU_ADDR_ATTN_BITS_CLR 0x0204
7534 #define IGU_ADDR_COALESCE_NOW 0x0205
7535 #define IGU_ADDR_SIMD_MASK 0x0206
7536 #define IGU_ADDR_SIMD_NOMASK 0x0207
7537 #define IGU_ADDR_MSI_CTL 0x0210
7538 #define IGU_ADDR_MSI_ADDR_LO 0x0211
7539 #define IGU_ADDR_MSI_ADDR_HI 0x0212
7540 #define IGU_ADDR_MSI_DATA 0x0213
7541
7542 #define IGU_USE_REGISTER_ustorm_type_0_sb_cleanup 0
7543 #define IGU_USE_REGISTER_ustorm_type_1_sb_cleanup 1
7544 #define IGU_USE_REGISTER_cstorm_type_0_sb_cleanup 2
7545 #define IGU_USE_REGISTER_cstorm_type_1_sb_cleanup 3
7546
7547 #define COMMAND_REG_INT_ACK 0x0
7548 #define COMMAND_REG_PROD_UPD 0x4
7549 #define COMMAND_REG_ATTN_BITS_UPD 0x8
7550 #define COMMAND_REG_ATTN_BITS_SET 0xc
7551 #define COMMAND_REG_ATTN_BITS_CLR 0x10
7552 #define COMMAND_REG_COALESCE_NOW 0x14
7553 #define COMMAND_REG_SIMD_MASK 0x18
7554 #define COMMAND_REG_SIMD_NOMASK 0x1c
7555
7556
7557 #define IGU_MEM_BASE 0x0000
7558
7559 #define IGU_MEM_MSIX_BASE 0x0000
7560 #define IGU_MEM_MSIX_UPPER 0x007f
7561 #define IGU_MEM_MSIX_RESERVED_UPPER 0x01ff
7562
7563 #define IGU_MEM_PBA_MSIX_BASE 0x0200
7564 #define IGU_MEM_PBA_MSIX_UPPER 0x0200
7565
7566 #define IGU_CMD_BACKWARD_COMP_PROD_UPD 0x0201
7567 #define IGU_MEM_PBA_MSIX_RESERVED_UPPER 0x03ff
7568
7569 #define IGU_CMD_INT_ACK_BASE 0x0400
7570 #define IGU_CMD_INT_ACK_UPPER\
7571 (IGU_CMD_INT_ACK_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
7572 #define IGU_CMD_INT_ACK_RESERVED_UPPER 0x04ff
7573
7574 #define IGU_CMD_E2_PROD_UPD_BASE 0x0500
7575 #define IGU_CMD_E2_PROD_UPD_UPPER\
7576 (IGU_CMD_E2_PROD_UPD_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
7577 #define IGU_CMD_E2_PROD_UPD_RESERVED_UPPER 0x059f
7578
7579 #define IGU_CMD_ATTN_BIT_UPD_UPPER 0x05a0
7580 #define IGU_CMD_ATTN_BIT_SET_UPPER 0x05a1
7581 #define IGU_CMD_ATTN_BIT_CLR_UPPER 0x05a2
7582
7583 #define IGU_REG_SISR_MDPC_WMASK_UPPER 0x05a3
7584 #define IGU_REG_SISR_MDPC_WMASK_LSB_UPPER 0x05a4
7585 #define IGU_REG_SISR_MDPC_WMASK_MSB_UPPER 0x05a5
7586 #define IGU_REG_SISR_MDPC_WOMASK_UPPER 0x05a6
7587
7588 #define IGU_REG_RESERVED_UPPER 0x05ff
7589 /* Fields of IGU PF CONFIGURATION REGISTER */
7590 #define IGU_PF_CONF_FUNC_EN (0x1<<0) /* function enable */
7591 #define IGU_PF_CONF_MSI_MSIX_EN (0x1<<1) /* MSI/MSIX enable */
7592 #define IGU_PF_CONF_INT_LINE_EN (0x1<<2) /* INT enable */
7593 #define IGU_PF_CONF_ATTN_BIT_EN (0x1<<3) /* attention enable */
7594 #define IGU_PF_CONF_SINGLE_ISR_EN (0x1<<4) /* single ISR mode enable */
7595 #define IGU_PF_CONF_SIMD_MODE (0x1<<5) /* simd all ones mode */
7596
7597 /* Fields of IGU VF CONFIGURATION REGISTER */
7598 #define IGU_VF_CONF_FUNC_EN (0x1<<0) /* function enable */
7599 #define IGU_VF_CONF_MSI_MSIX_EN (0x1<<1) /* MSI/MSIX enable */
7600 #define IGU_VF_CONF_PARENT_MASK (0x3<<2) /* Parent PF */
7601 #define IGU_VF_CONF_PARENT_SHIFT 2 /* Parent PF */
7602 #define IGU_VF_CONF_SINGLE_ISR_EN (0x1<<4) /* single ISR mode enable */
7603
7604
7605 #define IGU_BC_DSB_NUM_SEGS 5
7606 #define IGU_BC_NDSB_NUM_SEGS 2
7607 #define IGU_NORM_DSB_NUM_SEGS 2
7608 #define IGU_NORM_NDSB_NUM_SEGS 1
7609 #define IGU_BC_BASE_DSB_PROD 128
7610 #define IGU_NORM_BASE_DSB_PROD 136
7611
7612 /* FID (if VF - [6] = 0; [5:0] = VF number; if PF - [6] = 1; \
7613 [5:2] = 0; [1:0] = PF number) */
7614 #define IGU_FID_ENCODE_IS_PF (0x1<<6)
7615 #define IGU_FID_ENCODE_IS_PF_SHIFT 6
7616 #define IGU_FID_VF_NUM_MASK (0x3f)
7617 #define IGU_FID_PF_NUM_MASK (0x7)
7618
7619 #define IGU_REG_MAPPING_MEMORY_VALID (1<<0)
7620 #define IGU_REG_MAPPING_MEMORY_VECTOR_MASK (0x3F<<1)
7621 #define IGU_REG_MAPPING_MEMORY_VECTOR_SHIFT 1
7622 #define IGU_REG_MAPPING_MEMORY_FID_MASK (0x7F<<7)
7623 #define IGU_REG_MAPPING_MEMORY_FID_SHIFT 7
7624
7625
7626 #define CDU_REGION_NUMBER_XCM_AG 2
7627 #define CDU_REGION_NUMBER_UCM_AG 4
7628
7629
7630 /* String-to-compress [31:8] = CID (all 24 bits)
7631 * String-to-compress [7:4] = Region
7632 * String-to-compress [3:0] = Type
7633 */
7634 #define CDU_VALID_DATA(_cid, _region, _type)\
7635 (((_cid) << 8) | (((_region)&0xf)<<4) | (((_type)&0xf)))
7636 #define CDU_CRC8(_cid, _region, _type)\
7637 (calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff))
7638 #define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type)\
7639 (0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f))
7640 #define CDU_RSRVD_VALUE_TYPE_B(_crc, _type)\
7641 (0x80 | ((_type)&0xf << 3) | ((CDU_CRC8(_cid, _region, _type)) & 0x7))
7642 #define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80)
7643
7644 /* IdleChk registers */
7645 #define PXP_REG_HST_VF_DISABLED_ERROR_VALID 0x1030bc
7646 #define PXP_REG_HST_VF_DISABLED_ERROR_DATA 0x1030b8
7647 #define PXP_REG_HST_PER_VIOLATION_VALID 0x1030e0
7648 #define PXP_REG_HST_INCORRECT_ACCESS_VALID 0x1030cc
7649 #define PXP2_REG_RD_CPL_ERR_DETAILS 0x120778
7650 #define PXP2_REG_RD_CPL_ERR_DETAILS2 0x12077c
7651 #define PXP2_REG_RQ_GARB 0x120748
7652 #define PBF_REG_DISABLE_NEW_TASK_PROC_Q0 0x15c1bc
7653 #define PBF_REG_DISABLE_NEW_TASK_PROC_Q1 0x15c1c0
7654 #define PBF_REG_DISABLE_NEW_TASK_PROC_Q2 0x15c1c4
7655 #define PBF_REG_DISABLE_NEW_TASK_PROC_Q3 0x15c1c8
7656 #define PBF_REG_DISABLE_NEW_TASK_PROC_Q4 0x15c1cc
7657 #define PBF_REG_DISABLE_NEW_TASK_PROC_Q5 0x15c1d0
7658 #define PBF_REG_CREDIT_Q2 0x140344
7659 #define PBF_REG_CREDIT_Q3 0x140348
7660 #define PBF_REG_CREDIT_Q4 0x14034c
7661 #define PBF_REG_CREDIT_Q5 0x140350
7662 #define PBF_REG_INIT_CRD_Q2 0x15c238
7663 #define PBF_REG_INIT_CRD_Q3 0x15c23c
7664 #define PBF_REG_INIT_CRD_Q4 0x15c240
7665 #define PBF_REG_INIT_CRD_Q5 0x15c244
7666 #define PBF_REG_TASK_CNT_Q0 0x140374
7667 #define PBF_REG_TASK_CNT_Q1 0x140378
7668 #define PBF_REG_TASK_CNT_Q2 0x14037c
7669 #define PBF_REG_TASK_CNT_Q3 0x140380
7670 #define PBF_REG_TASK_CNT_Q4 0x140384
7671 #define PBF_REG_TASK_CNT_Q5 0x140388
7672 #define PBF_REG_TASK_CNT_LB_Q 0x140370
7673 #define QM_REG_BYTECRD0 0x16e6fc
7674 #define QM_REG_BYTECRD1 0x16e700
7675 #define QM_REG_BYTECRD2 0x16e704
7676 #define QM_REG_BYTECRD3 0x16e7ac
7677 #define QM_REG_BYTECRD4 0x16e7b0
7678 #define QM_REG_BYTECRD5 0x16e7b4
7679 #define QM_REG_BYTECRD6 0x16e7b8
7680 #define QM_REG_BYTECRDCMDQ_0 0x16e6e8
7681 #define QM_REG_BYTECRDERRREG 0x16e708
7682 #define MISC_REG_GRC_TIMEOUT_ATTN_FULL_FID 0xa714
7683 #define QM_REG_VOQCREDIT_2 0x1682d8
7684 #define QM_REG_VOQCREDIT_3 0x1682dc
7685 #define QM_REG_VOQCREDIT_5 0x1682e4
7686 #define QM_REG_VOQCREDIT_6 0x1682e8
7687 #define QM_REG_VOQINITCREDIT_3 0x16806c
7688 #define QM_REG_VOQINITCREDIT_6 0x168078
7689 #define QM_REG_FWVOQ0TOHWVOQ 0x16e7bc
7690 #define QM_REG_FWVOQ1TOHWVOQ 0x16e7c0
7691 #define QM_REG_FWVOQ2TOHWVOQ 0x16e7c4
7692 #define QM_REG_FWVOQ3TOHWVOQ 0x16e7c8
7693 #define QM_REG_FWVOQ4TOHWVOQ 0x16e7cc
7694 #define QM_REG_FWVOQ5TOHWVOQ 0x16e7d0
7695 #define QM_REG_FWVOQ6TOHWVOQ 0x16e7d4
7696 #define QM_REG_FWVOQ7TOHWVOQ 0x16e7d8
7697 #define NIG_REG_INGRESS_EOP_PORT0_EMPTY 0x104ec
7698 #define NIG_REG_INGRESS_EOP_PORT1_EMPTY 0x104f8
7699 #define NIG_REG_INGRESS_RMP0_DSCR_EMPTY 0x10530
7700 #define NIG_REG_INGRESS_RMP1_DSCR_EMPTY 0x10538
7701 #define NIG_REG_INGRESS_LB_PBF_DELAY_EMPTY 0x10508
7702 #define NIG_REG_EGRESS_MNG0_FIFO_EMPTY 0x10460
7703 #define NIG_REG_EGRESS_MNG1_FIFO_EMPTY 0x10474
7704 #define NIG_REG_EGRESS_DEBUG_FIFO_EMPTY 0x10418
7705 #define NIG_REG_EGRESS_DELAY0_EMPTY 0x10420
7706 #define NIG_REG_EGRESS_DELAY1_EMPTY 0x10428
7707 #define NIG_REG_LLH0_FIFO_EMPTY 0x10548
7708 #define NIG_REG_LLH1_FIFO_EMPTY 0x10558
7709 #define NIG_REG_P0_TX_MNG_HOST_FIFO_EMPTY 0x182a8
7710 #define NIG_REG_P0_TLLH_FIFO_EMPTY 0x18308
7711 #define NIG_REG_P0_HBUF_DSCR_EMPTY 0x18318
7712 #define NIG_REG_P1_HBUF_DSCR_EMPTY 0x18348
7713 #define NIG_REG_P0_RX_MACFIFO_EMPTY 0x18570
7714 #define NIG_REG_P0_TX_MACFIFO_EMPTY 0x18578
7715 #define NIG_REG_EGRESS_DELAY2_EMPTY 0x1862c
7716 #define NIG_REG_EGRESS_DELAY3_EMPTY 0x18630
7717 #define NIG_REG_EGRESS_DELAY4_EMPTY 0x18634
7718 #define NIG_REG_EGRESS_DELAY5_EMPTY 0x18638
7719
7720 /******************************************************************************
7721 * Description:
7722 * Calculates crc 8 on a word value: polynomial 0-1-2-8
7723 * Code was translated from Verilog.
7724 * Return:
7725 *****************************************************************************/
calc_crc8(u32 data,u8 crc)7726 static inline u8 calc_crc8(u32 data, u8 crc)
7727 {
7728 u8 D[32];
7729 u8 NewCRC[8];
7730 u8 C[8];
7731 u8 crc_res;
7732 u8 i;
7733
7734 /* split the data into 31 bits */
7735 for (i = 0; i < 32; i++) {
7736 D[i] = (u8)(data & 1);
7737 data = data >> 1;
7738 }
7739
7740 /* split the crc into 8 bits */
7741 for (i = 0; i < 8; i++) {
7742 C[i] = crc & 1;
7743 crc = crc >> 1;
7744 }
7745
7746 NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
7747 D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
7748 C[6] ^ C[7];
7749 NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
7750 D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
7751 D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^
7752 C[6];
7753 NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
7754 D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
7755 C[0] ^ C[1] ^ C[4] ^ C[5];
7756 NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
7757 D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
7758 C[1] ^ C[2] ^ C[5] ^ C[6];
7759 NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
7760 D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
7761 C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
7762 NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
7763 D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
7764 C[3] ^ C[4] ^ C[7];
7765 NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
7766 D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
7767 C[5];
7768 NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
7769 D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
7770 C[6];
7771
7772 crc_res = 0;
7773 for (i = 0; i < 8; i++)
7774 crc_res |= (NewCRC[i] << i);
7775
7776 return crc_res;
7777 }
7778 #endif /* BNX2X_REG_H */
7779