xref: /linux/include/linux/regulator/max8973-regulator.h (revision 79790b6818e96c58fe2bffee1b418c16e64e7b80)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * max8973-regulator.h -- MAXIM 8973 regulator
4  *
5  * Interface for regulator driver for MAXIM 8973 DC-DC step-down
6  * switching regulator.
7  *
8  * Copyright (C) 2012 NVIDIA Corporation
9 
10  * Author: Laxman Dewangan <ldewangan@nvidia.com>
11  */
12 
13 #ifndef __LINUX_REGULATOR_MAX8973_H
14 #define __LINUX_REGULATOR_MAX8973_H
15 
16 /*
17  * Control flags for configuration of the device.
18  * Client need to pass this information with ORed
19  */
20 #define MAX8973_CONTROL_REMOTE_SENSE_ENABLE			0x00000001
21 #define MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE		0x00000002
22 #define MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE		0x00000004
23 #define MAX8973_CONTROL_BIAS_ENABLE				0x00000008
24 #define MAX8973_CONTROL_PULL_DOWN_ENABLE			0x00000010
25 #define MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE			0x00000020
26 
27 #define MAX8973_CONTROL_CLKADV_TRIP_DISABLED			0x00000000
28 #define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US			0x00010000
29 #define MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US		0x00020000
30 #define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS	0x00030000
31 
32 #define MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL			0x00000000
33 #define MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER		0x00100000
34 #define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER		0x00200000
35 #define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER		0x00300000
36 
37 /*
38  * struct max8973_regulator_platform_data - max8973 regulator platform data.
39  *
40  * @reg_init_data: The regulator init data.
41  * @control_flags: Control flags which are ORed value of above flags to
42  *		configure device.
43  * @junction_temp_warning: Junction temp in millicelcius on which warning need
44  *			   to be set. Thermal functionality is only supported on
45  *			   MAX77621. The threshold warning supported by MAX77621
46  *			   are 120C and 140C.
47  * @enable_ext_control: Enable the voltage enable/disable through external
48  *		control signal from EN input pin. If it is false then
49  *		voltage output will be enabled/disabled through EN bit of
50  *		device register.
51  * @dvs_def_state: Default state of dvs. 1 if it is high else 0.
52  */
53 struct max8973_regulator_platform_data {
54 	struct regulator_init_data *reg_init_data;
55 	unsigned long control_flags;
56 	unsigned long junction_temp_warning;
57 	bool enable_ext_control;
58 	unsigned dvs_def_state:1;
59 };
60 
61 #endif /* __LINUX_REGULATOR_MAX8973_H */
62