xref: /linux/arch/xtensa/kernel/entry.S (revision 4f2c0a4acffbec01079c28f839422e64ddeff004)
1/*
2 * Low-level exception handling
3 *
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License.  See the file "COPYING" in the main directory of this archive
6 * for more details.
7 *
8 * Copyright (C) 2004 - 2008 by Tensilica Inc.
9 * Copyright (C) 2015 Cadence Design Systems Inc.
10 *
11 * Chris Zankel <chris@zankel.net>
12 *
13 */
14
15#include <linux/linkage.h>
16#include <linux/pgtable.h>
17#include <asm/asm-offsets.h>
18#include <asm/asmmacro.h>
19#include <asm/processor.h>
20#include <asm/coprocessor.h>
21#include <asm/thread_info.h>
22#include <asm/asm-uaccess.h>
23#include <asm/unistd.h>
24#include <asm/ptrace.h>
25#include <asm/current.h>
26#include <asm/page.h>
27#include <asm/signal.h>
28#include <asm/tlbflush.h>
29#include <variant/tie-asm.h>
30
31/*
32 * Macro to find first bit set in WINDOWBASE from the left + 1
33 *
34 * 100....0 -> 1
35 * 010....0 -> 2
36 * 000....1 -> WSBITS
37 */
38
39	.macro ffs_ws bit mask
40
41#if XCHAL_HAVE_NSA
42	nsau    \bit, \mask			# 32-WSBITS ... 31 (32 iff 0)
43	addi    \bit, \bit, WSBITS - 32 + 1   	# uppest bit set -> return 1
44#else
45	movi    \bit, WSBITS
46#if WSBITS > 16
47	_bltui  \mask, 0x10000, 99f
48	addi    \bit, \bit, -16
49	extui   \mask, \mask, 16, 16
50#endif
51#if WSBITS > 8
5299:	_bltui  \mask, 0x100, 99f
53	addi    \bit, \bit, -8
54	srli    \mask, \mask, 8
55#endif
5699:	_bltui  \mask, 0x10, 99f
57	addi    \bit, \bit, -4
58	srli    \mask, \mask, 4
5999:	_bltui  \mask, 0x4, 99f
60	addi    \bit, \bit, -2
61	srli    \mask, \mask, 2
6299:	_bltui  \mask, 0x2, 99f
63	addi    \bit, \bit, -1
6499:
65
66#endif
67	.endm
68
69
70	.macro	irq_save flags tmp
71#if XTENSA_FAKE_NMI
72#if defined(CONFIG_DEBUG_KERNEL) && (LOCKLEVEL | TOPLEVEL) >= XCHAL_DEBUGLEVEL
73	rsr	\flags, ps
74	extui	\tmp, \flags, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
75	bgei	\tmp, LOCKLEVEL, 99f
76	rsil	\tmp, LOCKLEVEL
7799:
78#else
79	movi	\tmp, LOCKLEVEL
80	rsr	\flags, ps
81	or	\flags, \flags, \tmp
82	xsr	\flags, ps
83	rsync
84#endif
85#else
86	rsil	\flags, LOCKLEVEL
87#endif
88	.endm
89
90/* ----------------- DEFAULT FIRST LEVEL EXCEPTION HANDLERS ----------------- */
91
92/*
93 * First-level exception handler for user exceptions.
94 * Save some special registers, extra states and all registers in the AR
95 * register file that were in use in the user task, and jump to the common
96 * exception code.
97 * We save SAR (used to calculate WMASK), and WB and WS (we don't have to
98 * save them for kernel exceptions).
99 *
100 * Entry condition for user_exception:
101 *
102 *   a0:	trashed, original value saved on stack (PT_AREG0)
103 *   a1:	a1
104 *   a2:	new stack pointer, original value in depc
105 *   a3:	a3
106 *   depc:	a2, original value saved on stack (PT_DEPC)
107 *   excsave1:	dispatch table
108 *
109 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
110 *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
111 *
112 * Entry condition for _user_exception:
113 *
114 *   a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC
115 *   excsave has been restored, and
116 *   stack pointer (a1) has been set.
117 *
118 * Note: _user_exception might be at an odd address. Don't use call0..call12
119 */
120	.literal_position
121
122ENTRY(user_exception)
123
124	/* Save a1, a2, a3, and set SP. */
125
126	rsr	a0, depc
127	s32i	a1, a2, PT_AREG1
128	s32i	a0, a2, PT_AREG2
129	s32i	a3, a2, PT_AREG3
130	mov	a1, a2
131
132	.globl _user_exception
133_user_exception:
134
135	/* Save SAR and turn off single stepping */
136
137	movi	a2, 0
138	wsr	a2, depc		# terminate user stack trace with 0
139	rsr	a3, sar
140	xsr	a2, icountlevel
141	s32i	a3, a1, PT_SAR
142	s32i	a2, a1, PT_ICOUNTLEVEL
143
144#if XCHAL_HAVE_THREADPTR
145	rur	a2, threadptr
146	s32i	a2, a1, PT_THREADPTR
147#endif
148
149	/* Rotate ws so that the current windowbase is at bit0. */
150	/* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
151
152#if defined(USER_SUPPORT_WINDOWED)
153	rsr	a2, windowbase
154	rsr	a3, windowstart
155	ssr	a2
156	s32i	a2, a1, PT_WINDOWBASE
157	s32i	a3, a1, PT_WINDOWSTART
158	slli	a2, a3, 32-WSBITS
159	src	a2, a3, a2
160	srli	a2, a2, 32-WSBITS
161	s32i	a2, a1, PT_WMASK	# needed for restoring registers
162#else
163	movi	a2, 0
164	movi	a3, 1
165	s32i	a2, a1, PT_WINDOWBASE
166	s32i	a3, a1, PT_WINDOWSTART
167	s32i	a3, a1, PT_WMASK
168#endif
169
170	/* Save only live registers. */
171
172UABI_W	_bbsi.l	a2, 1, .Lsave_window_registers
173	s32i	a4, a1, PT_AREG4
174	s32i	a5, a1, PT_AREG5
175	s32i	a6, a1, PT_AREG6
176	s32i	a7, a1, PT_AREG7
177UABI_W	_bbsi.l	a2, 2, .Lsave_window_registers
178	s32i	a8, a1, PT_AREG8
179	s32i	a9, a1, PT_AREG9
180	s32i	a10, a1, PT_AREG10
181	s32i	a11, a1, PT_AREG11
182UABI_W	_bbsi.l	a2, 3, .Lsave_window_registers
183	s32i	a12, a1, PT_AREG12
184	s32i	a13, a1, PT_AREG13
185	s32i	a14, a1, PT_AREG14
186	s32i	a15, a1, PT_AREG15
187
188#if defined(USER_SUPPORT_WINDOWED)
189	/* If only one valid frame skip saving regs. */
190
191	beqi	a2, 1, common_exception
192
193	/* Save the remaining registers.
194	 * We have to save all registers up to the first '1' from
195	 * the right, except the current frame (bit 0).
196	 * Assume a2 is:  001001000110001
197	 * All register frames starting from the top field to the marked '1'
198	 * must be saved.
199	 */
200.Lsave_window_registers:
201	addi	a3, a2, -1		# eliminate '1' in bit 0: yyyyxxww0
202	neg	a3, a3			# yyyyxxww0 -> YYYYXXWW1+1
203	and	a3, a3, a2		# max. only one bit is set
204
205	/* Find number of frames to save */
206
207	ffs_ws	a0, a3			# number of frames to the '1' from left
208
209	/* Store information into WMASK:
210	 * bits 0..3: xxx1 masked lower 4 bits of the rotated windowstart,
211	 * bits 4...: number of valid 4-register frames
212	 */
213
214	slli	a3, a0, 4		# number of frames to save in bits 8..4
215	extui	a2, a2, 0, 4		# mask for the first 16 registers
216	or	a2, a3, a2
217	s32i	a2, a1, PT_WMASK	# needed when we restore the reg-file
218
219	/* Save 4 registers at a time */
220
2211:	rotw	-1
222	s32i	a0, a5, PT_AREG_END - 16
223	s32i	a1, a5, PT_AREG_END - 12
224	s32i	a2, a5, PT_AREG_END - 8
225	s32i	a3, a5, PT_AREG_END - 4
226	addi	a0, a4, -1
227	addi	a1, a5, -16
228	_bnez	a0, 1b
229
230	/* WINDOWBASE still in SAR! */
231
232	rsr	a2, sar			# original WINDOWBASE
233	movi	a3, 1
234	ssl	a2
235	sll	a3, a3
236	wsr	a3, windowstart		# set corresponding WINDOWSTART bit
237	wsr	a2, windowbase		# and WINDOWSTART
238	rsync
239
240	/* We are back to the original stack pointer (a1) */
241#endif
242	/* Now, jump to the common exception handler. */
243
244	j	common_exception
245
246ENDPROC(user_exception)
247
248/*
249 * First-level exit handler for kernel exceptions
250 * Save special registers and the live window frame.
251 * Note: Even though we changes the stack pointer, we don't have to do a
252 *	 MOVSP here, as we do that when we return from the exception.
253 *	 (See comment in the kernel exception exit code)
254 *
255 * Entry condition for kernel_exception:
256 *
257 *   a0:	trashed, original value saved on stack (PT_AREG0)
258 *   a1:	a1
259 *   a2:	new stack pointer, original in DEPC
260 *   a3:	a3
261 *   depc:	a2, original value saved on stack (PT_DEPC)
262 *   excsave_1:	dispatch table
263 *
264 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
265 *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
266 *
267 * Entry condition for _kernel_exception:
268 *
269 *   a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC
270 *   excsave has been restored, and
271 *   stack pointer (a1) has been set.
272 *
273 * Note: _kernel_exception might be at an odd address. Don't use call0..call12
274 */
275
276ENTRY(kernel_exception)
277
278	/* Save a1, a2, a3, and set SP. */
279
280	rsr	a0, depc		# get a2
281	s32i	a1, a2, PT_AREG1
282	s32i	a0, a2, PT_AREG2
283	s32i	a3, a2, PT_AREG3
284	mov	a1, a2
285
286	.globl _kernel_exception
287_kernel_exception:
288
289	/* Save SAR and turn off single stepping */
290
291	movi	a2, 0
292	rsr	a3, sar
293	xsr	a2, icountlevel
294	s32i	a3, a1, PT_SAR
295	s32i	a2, a1, PT_ICOUNTLEVEL
296
297#if defined(__XTENSA_WINDOWED_ABI__)
298	/* Rotate ws so that the current windowbase is at bit0. */
299	/* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
300
301	rsr	a2, windowbase		# don't need to save these, we only
302	rsr	a3, windowstart		# need shifted windowstart: windowmask
303	ssr	a2
304	slli	a2, a3, 32-WSBITS
305	src	a2, a3, a2
306	srli	a2, a2, 32-WSBITS
307	s32i	a2, a1, PT_WMASK	# needed for kernel_exception_exit
308#endif
309
310	/* Save only the live window-frame */
311
312KABI_W	_bbsi.l	a2, 1, 1f
313	s32i	a4, a1, PT_AREG4
314	s32i	a5, a1, PT_AREG5
315	s32i	a6, a1, PT_AREG6
316	s32i	a7, a1, PT_AREG7
317KABI_W	_bbsi.l	a2, 2, 1f
318	s32i	a8, a1, PT_AREG8
319	s32i	a9, a1, PT_AREG9
320	s32i	a10, a1, PT_AREG10
321	s32i	a11, a1, PT_AREG11
322KABI_W	_bbsi.l	a2, 3, 1f
323	s32i	a12, a1, PT_AREG12
324	s32i	a13, a1, PT_AREG13
325	s32i	a14, a1, PT_AREG14
326	s32i	a15, a1, PT_AREG15
327
328#ifdef __XTENSA_WINDOWED_ABI__
329	_bnei	a2, 1, 1f
330	/* Copy spill slots of a0 and a1 to imitate movsp
331	 * in order to keep exception stack continuous
332	 */
333	l32i	a3, a1, PT_KERNEL_SIZE
334	l32i	a0, a1, PT_KERNEL_SIZE + 4
335	s32e	a3, a1, -16
336	s32e	a0, a1, -12
337#endif
3381:
339	l32i	a0, a1, PT_AREG0	# restore saved a0
340	wsr	a0, depc
341
342/*
343 * This is the common exception handler.
344 * We get here from the user exception handler or simply by falling through
345 * from the kernel exception handler.
346 * Save the remaining special registers, switch to kernel mode, and jump
347 * to the second-level exception handler.
348 *
349 */
350
351common_exception:
352
353	/* Save some registers, disable loops and clear the syscall flag. */
354
355	rsr	a2, debugcause
356	rsr	a3, epc1
357	s32i	a2, a1, PT_DEBUGCAUSE
358	s32i	a3, a1, PT_PC
359
360	movi	a2, NO_SYSCALL
361	rsr	a3, excvaddr
362	s32i	a2, a1, PT_SYSCALL
363	movi	a2, 0
364	s32i	a3, a1, PT_EXCVADDR
365#if XCHAL_HAVE_LOOPS
366	xsr	a2, lcount
367	s32i	a2, a1, PT_LCOUNT
368#endif
369
370#if XCHAL_HAVE_EXCLUSIVE
371	/* Clear exclusive access monitor set by interrupted code */
372	clrex
373#endif
374
375	/* It is now save to restore the EXC_TABLE_FIXUP variable. */
376
377	rsr	a2, exccause
378	movi	a3, 0
379	rsr	a0, excsave1
380	s32i	a2, a1, PT_EXCCAUSE
381	s32i	a3, a0, EXC_TABLE_FIXUP
382
383	/* All unrecoverable states are saved on stack, now, and a1 is valid.
384	 * Now we can allow exceptions again. In case we've got an interrupt
385	 * PS.INTLEVEL is set to LOCKLEVEL disabling furhter interrupts,
386	 * otherwise it's left unchanged.
387	 *
388	 * Set PS(EXCM = 0, UM = 0, RING = 0, OWB = 0, WOE = 1, INTLEVEL = X)
389	 */
390
391	rsr	a3, ps
392	s32i	a3, a1, PT_PS		# save ps
393
394#if XTENSA_FAKE_NMI
395	/* Correct PS needs to be saved in the PT_PS:
396	 * - in case of exception or level-1 interrupt it's in the PS,
397	 *   and is already saved.
398	 * - in case of medium level interrupt it's in the excsave2.
399	 */
400	movi	a0, EXCCAUSE_MAPPED_NMI
401	extui	a3, a3, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
402	beq	a2, a0, .Lmedium_level_irq
403	bnei	a2, EXCCAUSE_LEVEL1_INTERRUPT, .Lexception
404	beqz	a3, .Llevel1_irq	# level-1 IRQ sets ps.intlevel to 0
405
406.Lmedium_level_irq:
407	rsr	a0, excsave2
408	s32i	a0, a1, PT_PS		# save medium-level interrupt ps
409	bgei	a3, LOCKLEVEL, .Lexception
410
411.Llevel1_irq:
412	movi	a3, LOCKLEVEL
413
414.Lexception:
415KABI_W	movi	a0, PS_WOE_MASK
416KABI_W	or	a3, a3, a0
417#else
418	addi	a2, a2, -EXCCAUSE_LEVEL1_INTERRUPT
419	movi	a0, LOCKLEVEL
420	extui	a3, a3, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
421					# a3 = PS.INTLEVEL
422	moveqz	a3, a0, a2		# a3 = LOCKLEVEL iff interrupt
423KABI_W	movi	a2, PS_WOE_MASK
424KABI_W	or	a3, a3, a2
425#endif
426
427	/* restore return address (or 0 if return to userspace) */
428	rsr	a0, depc
429	wsr	a3, ps
430	rsync				# PS.WOE => rsync => overflow
431
432	/* Save lbeg, lend */
433#if XCHAL_HAVE_LOOPS
434	rsr	a4, lbeg
435	rsr	a3, lend
436	s32i	a4, a1, PT_LBEG
437	s32i	a3, a1, PT_LEND
438#endif
439
440	/* Save SCOMPARE1 */
441
442#if XCHAL_HAVE_S32C1I
443	rsr     a3, scompare1
444	s32i    a3, a1, PT_SCOMPARE1
445#endif
446
447	/* Save optional registers. */
448
449	save_xtregs_opt a1 a3 a4 a5 a6 a7 PT_XTREGS_OPT
450
451#ifdef CONFIG_TRACE_IRQFLAGS
452	rsr		abi_tmp0, ps
453	extui		abi_tmp0, abi_tmp0, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
454	beqz		abi_tmp0, 1f
455	abi_call	trace_hardirqs_off
4561:
457#endif
458#ifdef CONFIG_CONTEXT_TRACKING_USER
459	l32i		abi_tmp0, a1, PT_PS
460	bbci.l		abi_tmp0, PS_UM_BIT, 1f
461	abi_call	user_exit_callable
4621:
463#endif
464
465	/* Go to second-level dispatcher. Set up parameters to pass to the
466	 * exception handler and call the exception handler.
467	 */
468
469	l32i		abi_arg1, a1, PT_EXCCAUSE	# pass EXCCAUSE
470	rsr		abi_tmp0, excsave1
471	addx4		abi_tmp0, abi_arg1, abi_tmp0
472	l32i		abi_tmp0, abi_tmp0, EXC_TABLE_DEFAULT	# load handler
473	mov		abi_arg0, a1			# pass stack frame
474
475	/* Call the second-level handler */
476
477	abi_callx	abi_tmp0
478
479	/* Jump here for exception exit */
480	.global common_exception_return
481common_exception_return:
482
483#if XTENSA_FAKE_NMI
484	l32i		abi_tmp0, a1, PT_EXCCAUSE
485	movi		abi_tmp1, EXCCAUSE_MAPPED_NMI
486	l32i		abi_saved1, a1, PT_PS
487	beq		abi_tmp0, abi_tmp1, .Lrestore_state
488#endif
489.Ltif_loop:
490	irq_save	abi_tmp0, abi_tmp1
491#ifdef CONFIG_TRACE_IRQFLAGS
492	abi_call	trace_hardirqs_off
493#endif
494
495	/* Jump if we are returning from kernel exceptions. */
496
497	l32i		abi_saved1, a1, PT_PS
498	GET_THREAD_INFO(abi_tmp0, a1)
499	l32i		abi_saved0, abi_tmp0, TI_FLAGS
500	_bbci.l		abi_saved1, PS_UM_BIT, .Lexit_tif_loop_kernel
501
502	/* Specific to a user exception exit:
503	 * We need to check some flags for signal handling and rescheduling,
504	 * and have to restore WB and WS, extra states, and all registers
505	 * in the register file that were in use in the user task.
506	 * Note that we don't disable interrupts here.
507	 */
508
509	_bbsi.l		abi_saved0, TIF_NEED_RESCHED, .Lresched
510	movi		abi_tmp0, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL
511	bnone		abi_saved0, abi_tmp0, .Lexit_tif_loop_user
512
513	l32i		abi_tmp0, a1, PT_DEPC
514	bgeui		abi_tmp0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lrestore_state
515
516	/* Call do_signal() */
517
518#ifdef CONFIG_TRACE_IRQFLAGS
519	abi_call	trace_hardirqs_on
520#endif
521	rsil		abi_tmp0, 0
522	mov		abi_arg0, a1
523	abi_call	do_notify_resume	# int do_notify_resume(struct pt_regs*)
524	j		.Ltif_loop
525
526.Lresched:
527#ifdef CONFIG_TRACE_IRQFLAGS
528	abi_call	trace_hardirqs_on
529#endif
530	rsil		abi_tmp0, 0
531	abi_call	schedule	# void schedule (void)
532	j		.Ltif_loop
533
534.Lexit_tif_loop_kernel:
535#ifdef CONFIG_PREEMPTION
536	_bbci.l		abi_saved0, TIF_NEED_RESCHED, .Lrestore_state
537
538	/* Check current_thread_info->preempt_count */
539
540	l32i		abi_tmp1, abi_tmp0, TI_PRE_COUNT
541	bnez		abi_tmp1, .Lrestore_state
542	abi_call	preempt_schedule_irq
543#endif
544	j		.Lrestore_state
545
546.Lexit_tif_loop_user:
547#ifdef CONFIG_CONTEXT_TRACKING_USER
548	abi_call	user_enter_callable
549#endif
550#ifdef CONFIG_HAVE_HW_BREAKPOINT
551	_bbci.l		abi_saved0, TIF_DB_DISABLED, 1f
552	abi_call	restore_dbreak
5531:
554#endif
555#ifdef CONFIG_DEBUG_TLB_SANITY
556	l32i		abi_tmp0, a1, PT_DEPC
557	bgeui		abi_tmp0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lrestore_state
558	abi_call	check_tlb_sanity
559#endif
560
561.Lrestore_state:
562#ifdef CONFIG_TRACE_IRQFLAGS
563	extui		abi_tmp0, abi_saved1, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
564	bgei		abi_tmp0, LOCKLEVEL, 1f
565	abi_call	trace_hardirqs_on
5661:
567#endif
568	/*
569	 * Restore optional registers.
570	 * abi_arg* are used as temporary registers here.
571	 */
572
573	load_xtregs_opt a1 abi_tmp0 abi_arg0 abi_arg1 abi_arg2 abi_arg3 PT_XTREGS_OPT
574
575	/* Restore SCOMPARE1 */
576
577#if XCHAL_HAVE_S32C1I
578	l32i		abi_tmp0, a1, PT_SCOMPARE1
579	wsr		abi_tmp0, scompare1
580#endif
581	wsr		abi_saved1, ps		/* disable interrupts */
582	_bbci.l		abi_saved1, PS_UM_BIT, kernel_exception_exit
583
584user_exception_exit:
585
586	/* Restore the state of the task and return from the exception. */
587
588#if defined(USER_SUPPORT_WINDOWED)
589	/* Switch to the user thread WINDOWBASE. Save SP temporarily in DEPC */
590
591	l32i	a2, a1, PT_WINDOWBASE
592	l32i	a3, a1, PT_WINDOWSTART
593	wsr	a1, depc		# use DEPC as temp storage
594	wsr	a3, windowstart		# restore WINDOWSTART
595	ssr	a2			# preserve user's WB in the SAR
596	wsr	a2, windowbase		# switch to user's saved WB
597	rsync
598	rsr	a1, depc		# restore stack pointer
599	l32i	a2, a1, PT_WMASK	# register frames saved (in bits 4...9)
600	rotw	-1			# we restore a4..a7
601	_bltui	a6, 16, .Lclear_regs	# only have to restore current window?
602
603	/* The working registers are a0 and a3.  We are restoring to
604	 * a4..a7.  Be careful not to destroy what we have just restored.
605	 * Note: wmask has the format YYYYM:
606	 *       Y: number of registers saved in groups of 4
607	 *       M: 4 bit mask of first 16 registers
608	 */
609
610	mov	a2, a6
611	mov	a3, a5
612
6131:	rotw	-1			# a0..a3 become a4..a7
614	addi	a3, a7, -4*4		# next iteration
615	addi	a2, a6, -16		# decrementing Y in WMASK
616	l32i	a4, a3, PT_AREG_END + 0
617	l32i	a5, a3, PT_AREG_END + 4
618	l32i	a6, a3, PT_AREG_END + 8
619	l32i	a7, a3, PT_AREG_END + 12
620	_bgeui	a2, 16, 1b
621
622	/* Clear unrestored registers (don't leak anything to user-land */
623
624.Lclear_regs:
625	rsr	a0, windowbase
626	rsr	a3, sar
627	sub	a3, a0, a3
628	beqz	a3, 2f
629	extui	a3, a3, 0, WBBITS
630
6311:	rotw	-1
632	addi	a3, a7, -1
633	movi	a4, 0
634	movi	a5, 0
635	movi	a6, 0
636	movi	a7, 0
637	bgei	a3, 1, 1b
638
639	/* We are back were we were when we started.
640	 * Note: a2 still contains WMASK (if we've returned to the original
641	 *	 frame where we had loaded a2), or at least the lower 4 bits
642	 *	 (if we have restored WSBITS-1 frames).
643	 */
6442:
645#else
646	movi	a2, 1
647#endif
648#if XCHAL_HAVE_THREADPTR
649	l32i	a3, a1, PT_THREADPTR
650	wur	a3, threadptr
651#endif
652
653	j	common_exception_exit
654
655	/* This is the kernel exception exit.
656	 * We avoided to do a MOVSP when we entered the exception, but we
657	 * have to do it here.
658	 */
659
660kernel_exception_exit:
661
662#if defined(__XTENSA_WINDOWED_ABI__)
663	/* Check if we have to do a movsp.
664	 *
665	 * We only have to do a movsp if the previous window-frame has
666	 * been spilled to the *temporary* exception stack instead of the
667	 * task's stack. This is the case if the corresponding bit in
668	 * WINDOWSTART for the previous window-frame was set before
669	 * (not spilled) but is zero now (spilled).
670	 * If this bit is zero, all other bits except the one for the
671	 * current window frame are also zero. So, we can use a simple test:
672	 * 'and' WINDOWSTART and WINDOWSTART-1:
673	 *
674	 *  (XXXXXX1[0]* - 1) AND XXXXXX1[0]* = XXXXXX0[0]*
675	 *
676	 * The result is zero only if one bit was set.
677	 *
678	 * (Note: We might have gone through several task switches before
679	 *        we come back to the current task, so WINDOWBASE might be
680	 *        different from the time the exception occurred.)
681	 */
682
683	/* Test WINDOWSTART before and after the exception.
684	 * We actually have WMASK, so we only have to test if it is 1 or not.
685	 */
686
687	l32i	a2, a1, PT_WMASK
688	_beqi	a2, 1, common_exception_exit	# Spilled before exception,jump
689
690	/* Test WINDOWSTART now. If spilled, do the movsp */
691
692	rsr     a3, windowstart
693	addi	a0, a3, -1
694	and     a3, a3, a0
695	_bnez	a3, common_exception_exit
696
697	/* Do a movsp (we returned from a call4, so we have at least a0..a7) */
698
699	addi    a0, a1, -16
700	l32i    a3, a0, 0
701	l32i    a4, a0, 4
702	s32i    a3, a1, PT_KERNEL_SIZE + 0
703	s32i    a4, a1, PT_KERNEL_SIZE + 4
704	l32i    a3, a0, 8
705	l32i    a4, a0, 12
706	s32i    a3, a1, PT_KERNEL_SIZE + 8
707	s32i    a4, a1, PT_KERNEL_SIZE + 12
708
709	/* Common exception exit.
710	 * We restore the special register and the current window frame, and
711	 * return from the exception.
712	 *
713	 * Note: We expect a2 to hold PT_WMASK
714	 */
715#else
716	movi	a2, 1
717#endif
718
719common_exception_exit:
720
721	/* Restore address registers. */
722
723	_bbsi.l	a2, 1, 1f
724	l32i	a4,  a1, PT_AREG4
725	l32i	a5,  a1, PT_AREG5
726	l32i	a6,  a1, PT_AREG6
727	l32i	a7,  a1, PT_AREG7
728	_bbsi.l	a2, 2, 1f
729	l32i	a8,  a1, PT_AREG8
730	l32i	a9,  a1, PT_AREG9
731	l32i	a10, a1, PT_AREG10
732	l32i	a11, a1, PT_AREG11
733	_bbsi.l	a2, 3, 1f
734	l32i	a12, a1, PT_AREG12
735	l32i	a13, a1, PT_AREG13
736	l32i	a14, a1, PT_AREG14
737	l32i	a15, a1, PT_AREG15
738
739	/* Restore PC, SAR */
740
7411:	l32i	a2, a1, PT_PC
742	l32i	a3, a1, PT_SAR
743	wsr	a2, epc1
744	wsr	a3, sar
745
746	/* Restore LBEG, LEND, LCOUNT */
747#if XCHAL_HAVE_LOOPS
748	l32i	a2, a1, PT_LBEG
749	l32i	a3, a1, PT_LEND
750	wsr	a2, lbeg
751	l32i	a2, a1, PT_LCOUNT
752	wsr	a3, lend
753	wsr	a2, lcount
754#endif
755
756	/* We control single stepping through the ICOUNTLEVEL register. */
757
758	l32i	a2, a1, PT_ICOUNTLEVEL
759	movi	a3, -2
760	wsr	a2, icountlevel
761	wsr	a3, icount
762
763	/* Check if it was double exception. */
764
765	l32i	a0, a1, PT_DEPC
766	l32i	a3, a1, PT_AREG3
767	l32i	a2, a1, PT_AREG2
768	_bgeui	a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
769
770	/* Restore a0...a3 and return */
771
772	l32i	a0, a1, PT_AREG0
773	l32i	a1, a1, PT_AREG1
774	rfe
775
7761: 	wsr	a0, depc
777	l32i	a0, a1, PT_AREG0
778	l32i	a1, a1, PT_AREG1
779	rfde
780
781ENDPROC(kernel_exception)
782
783/*
784 * Debug exception handler.
785 *
786 * Currently, we don't support KGDB, so only user application can be debugged.
787 *
788 * When we get here,  a0 is trashed and saved to excsave[debuglevel]
789 */
790
791	.literal_position
792
793ENTRY(debug_exception)
794
795	rsr	a0, SREG_EPS + XCHAL_DEBUGLEVEL
796	bbsi.l	a0, PS_EXCM_BIT, .Ldebug_exception_in_exception	# exception mode
797
798	/* Set EPC1 and EXCCAUSE */
799
800	wsr	a2, depc		# save a2 temporarily
801	rsr	a2, SREG_EPC + XCHAL_DEBUGLEVEL
802	wsr	a2, epc1
803
804	movi	a2, EXCCAUSE_MAPPED_DEBUG
805	wsr	a2, exccause
806
807	/* Restore PS to the value before the debug exc but with PS.EXCM set.*/
808
809	movi	a2, 1 << PS_EXCM_BIT
810	or	a2, a0, a2
811	wsr	a2, ps
812
813	/* Switch to kernel/user stack, restore jump vector, and save a0 */
814
815	bbsi.l	a2, PS_UM_BIT, .Ldebug_exception_user	# jump if user mode
816	addi	a2, a1, -16 - PT_KERNEL_SIZE	# assume kernel stack
817
818.Ldebug_exception_continue:
819	l32i	a0, a3, DT_DEBUG_SAVE
820	s32i	a1, a2, PT_AREG1
821	s32i	a0, a2, PT_AREG0
822	movi	a0, 0
823	s32i	a0, a2, PT_DEPC		# mark it as a regular exception
824	xsr	a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
825	xsr	a0, depc
826	s32i	a3, a2, PT_AREG3
827	s32i	a0, a2, PT_AREG2
828	mov	a1, a2
829
830	/* Debug exception is handled as an exception, so interrupts will
831	 * likely be enabled in the common exception handler. Disable
832	 * preemption if we have HW breakpoints to preserve DEBUGCAUSE.DBNUM
833	 * meaning.
834	 */
835#if defined(CONFIG_PREEMPT_COUNT) && defined(CONFIG_HAVE_HW_BREAKPOINT)
836	GET_THREAD_INFO(a2, a1)
837	l32i	a3, a2, TI_PRE_COUNT
838	addi	a3, a3, 1
839	s32i	a3, a2, TI_PRE_COUNT
840#endif
841
842	rsr	a2, ps
843	bbsi.l	a2, PS_UM_BIT, _user_exception
844	j	_kernel_exception
845
846.Ldebug_exception_user:
847	rsr	a2, excsave1
848	l32i	a2, a2, EXC_TABLE_KSTK	# load kernel stack pointer
849	j	.Ldebug_exception_continue
850
851.Ldebug_exception_in_exception:
852#ifdef CONFIG_HAVE_HW_BREAKPOINT
853	/* Debug exception while in exception mode. This may happen when
854	 * window overflow/underflow handler or fast exception handler hits
855	 * data breakpoint, in which case save and disable all data
856	 * breakpoints, single-step faulting instruction and restore data
857	 * breakpoints.
858	 */
859
860	bbci.l	a0, PS_UM_BIT, .Ldebug_exception_in_exception	# jump if kernel mode
861
862	rsr	a0, debugcause
863	bbsi.l	a0, DEBUGCAUSE_DBREAK_BIT, .Ldebug_save_dbreak
864
865	.set	_index, 0
866	.rept	XCHAL_NUM_DBREAK
867	l32i	a0, a3, DT_DBREAKC_SAVE + _index * 4
868	wsr	a0, SREG_DBREAKC + _index
869	.set	_index, _index + 1
870	.endr
871
872	l32i	a0, a3, DT_ICOUNT_LEVEL_SAVE
873	wsr	a0, icountlevel
874
875	l32i	a0, a3, DT_ICOUNT_SAVE
876	xsr	a0, icount
877
878	l32i	a0, a3, DT_DEBUG_SAVE
879	xsr	a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
880	rfi	XCHAL_DEBUGLEVEL
881
882.Ldebug_save_dbreak:
883	.set	_index, 0
884	.rept	XCHAL_NUM_DBREAK
885	movi	a0, 0
886	xsr	a0, SREG_DBREAKC + _index
887	s32i	a0, a3, DT_DBREAKC_SAVE + _index * 4
888	.set	_index, _index + 1
889	.endr
890
891	movi	a0, XCHAL_EXCM_LEVEL + 1
892	xsr	a0, icountlevel
893	s32i	a0, a3, DT_ICOUNT_LEVEL_SAVE
894
895	movi	a0, 0xfffffffe
896	xsr	a0, icount
897	s32i	a0, a3, DT_ICOUNT_SAVE
898
899	l32i	a0, a3, DT_DEBUG_SAVE
900	xsr	a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
901	rfi	XCHAL_DEBUGLEVEL
902#else
903	/* Debug exception while in exception mode. Should not happen. */
904	j	.Ldebug_exception_in_exception	// FIXME!!
905#endif
906
907ENDPROC(debug_exception)
908
909/*
910 * We get here in case of an unrecoverable exception.
911 * The only thing we can do is to be nice and print a panic message.
912 * We only produce a single stack frame for panic, so ???
913 *
914 *
915 * Entry conditions:
916 *
917 *   - a0 contains the caller address; original value saved in excsave1.
918 *   - the original a0 contains a valid return address (backtrace) or 0.
919 *   - a2 contains a valid stackpointer
920 *
921 * Notes:
922 *
923 *   - If the stack pointer could be invalid, the caller has to setup a
924 *     dummy stack pointer (e.g. the stack of the init_task)
925 *
926 *   - If the return address could be invalid, the caller has to set it
927 *     to 0, so the backtrace would stop.
928 *
929 */
930	.align 4
931unrecoverable_text:
932	.ascii "Unrecoverable error in exception handler\0"
933
934	.literal_position
935
936ENTRY(unrecoverable_exception)
937
938#if XCHAL_HAVE_WINDOWED
939	movi	a0, 1
940	movi	a1, 0
941
942	wsr	a0, windowstart
943	wsr	a1, windowbase
944	rsync
945#endif
946
947	movi	a1, KERNEL_PS_WOE_MASK | LOCKLEVEL
948	wsr	a1, ps
949	rsync
950
951	movi	a1, init_task
952	movi	a0, 0
953	addi	a1, a1, PT_REGS_OFFSET
954
955	movi	abi_arg0, unrecoverable_text
956	abi_call	panic
957
9581:	j	1b
959
960ENDPROC(unrecoverable_exception)
961
962/* -------------------------- FAST EXCEPTION HANDLERS ----------------------- */
963
964	__XTENSA_HANDLER
965	.literal_position
966
967#ifdef SUPPORT_WINDOWED
968/*
969 * Fast-handler for alloca exceptions
970 *
971 *  The ALLOCA handler is entered when user code executes the MOVSP
972 *  instruction and the caller's frame is not in the register file.
973 *
974 * This algorithm was taken from the Ross Morley's RTOS Porting Layer:
975 *
976 *    /home/ross/rtos/porting/XtensaRTOS-PortingLayer-20090507/xtensa_vectors.S
977 *
978 * It leverages the existing window spill/fill routines and their support for
979 * double exceptions. The 'movsp' instruction will only cause an exception if
980 * the next window needs to be loaded. In fact this ALLOCA exception may be
981 * replaced at some point by changing the hardware to do a underflow exception
982 * of the proper size instead.
983 *
984 * This algorithm simply backs out the register changes started by the user
985 * exception handler, makes it appear that we have started a window underflow
986 * by rotating the window back and then setting the old window base (OWB) in
987 * the 'ps' register with the rolled back window base. The 'movsp' instruction
988 * will be re-executed and this time since the next window frames is in the
989 * active AR registers it won't cause an exception.
990 *
991 * If the WindowUnderflow code gets a TLB miss the page will get mapped
992 * the partial WindowUnderflow will be handled in the double exception
993 * handler.
994 *
995 * Entry condition:
996 *
997 *   a0:	trashed, original value saved on stack (PT_AREG0)
998 *   a1:	a1
999 *   a2:	new stack pointer, original in DEPC
1000 *   a3:	a3
1001 *   depc:	a2, original value saved on stack (PT_DEPC)
1002 *   excsave_1:	dispatch table
1003 *
1004 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
1005 *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
1006 */
1007
1008ENTRY(fast_alloca)
1009	rsr	a0, windowbase
1010	rotw	-1
1011	rsr	a2, ps
1012	extui	a3, a2, PS_OWB_SHIFT, PS_OWB_WIDTH
1013	xor	a3, a3, a4
1014	l32i	a4, a6, PT_AREG0
1015	l32i	a1, a6, PT_DEPC
1016	rsr	a6, depc
1017	wsr	a1, depc
1018	slli	a3, a3, PS_OWB_SHIFT
1019	xor	a2, a2, a3
1020	wsr	a2, ps
1021	rsync
1022
1023	_bbci.l	a4, 31, 4f
1024	rotw	-1
1025	_bbci.l	a8, 30, 8f
1026	rotw	-1
1027	j	_WindowUnderflow12
10288:	j	_WindowUnderflow8
10294:	j	_WindowUnderflow4
1030ENDPROC(fast_alloca)
1031#endif
1032
1033#ifdef CONFIG_USER_ABI_CALL0_PROBE
1034/*
1035 * fast illegal instruction handler.
1036 *
1037 * This is used to fix up user PS.WOE on the exception caused
1038 * by the first opcode related to register window. If PS.WOE is
1039 * already set it goes directly to the common user exception handler.
1040 *
1041 * Entry condition:
1042 *
1043 *   a0:	trashed, original value saved on stack (PT_AREG0)
1044 *   a1:	a1
1045 *   a2:	new stack pointer, original in DEPC
1046 *   a3:	a3
1047 *   depc:	a2, original value saved on stack (PT_DEPC)
1048 *   excsave_1:	dispatch table
1049 */
1050
1051ENTRY(fast_illegal_instruction_user)
1052
1053	rsr	a0, ps
1054	bbsi.l	a0, PS_WOE_BIT, 1f
1055	s32i	a3, a2, PT_AREG3
1056	movi	a3, PS_WOE_MASK
1057	or	a0, a0, a3
1058	wsr	a0, ps
1059#ifdef CONFIG_USER_ABI_CALL0_PROBE
1060	GET_THREAD_INFO(a3, a2)
1061	rsr	a0, epc1
1062	s32i	a0, a3, TI_PS_WOE_FIX_ADDR
1063#endif
1064	l32i	a3, a2, PT_AREG3
1065	l32i	a0, a2, PT_AREG0
1066	rsr	a2, depc
1067	rfe
10681:
1069	call0	user_exception
1070
1071ENDPROC(fast_illegal_instruction_user)
1072#endif
1073
1074	/*
1075 * fast system calls.
1076 *
1077 * WARNING:  The kernel doesn't save the entire user context before
1078 * handling a fast system call.  These functions are small and short,
1079 * usually offering some functionality not available to user tasks.
1080 *
1081 * BE CAREFUL TO PRESERVE THE USER'S CONTEXT.
1082 *
1083 * Entry condition:
1084 *
1085 *   a0:	trashed, original value saved on stack (PT_AREG0)
1086 *   a1:	a1
1087 *   a2:	new stack pointer, original in DEPC
1088 *   a3:	a3
1089 *   depc:	a2, original value saved on stack (PT_DEPC)
1090 *   excsave_1:	dispatch table
1091 */
1092
1093ENTRY(fast_syscall_user)
1094
1095	/* Skip syscall. */
1096
1097	rsr	a0, epc1
1098	addi	a0, a0, 3
1099	wsr	a0, epc1
1100
1101	l32i	a0, a2, PT_DEPC
1102	bgeui	a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable
1103
1104	rsr	a0, depc			# get syscall-nr
1105	_beqz	a0, fast_syscall_spill_registers
1106	_beqi	a0, __NR_xtensa, fast_syscall_xtensa
1107
1108	call0	user_exception
1109
1110ENDPROC(fast_syscall_user)
1111
1112ENTRY(fast_syscall_unrecoverable)
1113
1114	/* Restore all states. */
1115
1116	l32i    a0, a2, PT_AREG0        # restore a0
1117	xsr     a2, depc                # restore a2, depc
1118
1119	wsr     a0, excsave1
1120	call0	unrecoverable_exception
1121
1122ENDPROC(fast_syscall_unrecoverable)
1123
1124/*
1125 * sysxtensa syscall handler
1126 *
1127 * int sysxtensa (SYS_XTENSA_ATOMIC_SET,     ptr, val,    unused);
1128 * int sysxtensa (SYS_XTENSA_ATOMIC_ADD,     ptr, val,    unused);
1129 * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val,    unused);
1130 * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval);
1131 *        a2            a6                   a3    a4      a5
1132 *
1133 * Entry condition:
1134 *
1135 *   a0:	a2 (syscall-nr), original value saved on stack (PT_AREG0)
1136 *   a1:	a1
1137 *   a2:	new stack pointer, original in a0 and DEPC
1138 *   a3:	a3
1139 *   a4..a15:	unchanged
1140 *   depc:	a2, original value saved on stack (PT_DEPC)
1141 *   excsave_1:	dispatch table
1142 *
1143 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
1144 *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
1145 *
1146 * Note: we don't have to save a2; a2 holds the return value
1147 */
1148
1149	.literal_position
1150
1151#ifdef CONFIG_FAST_SYSCALL_XTENSA
1152
1153ENTRY(fast_syscall_xtensa)
1154
1155	s32i	a7, a2, PT_AREG7	# we need an additional register
1156	movi	a7, 4			# sizeof(unsigned int)
1157	access_ok a3, a7, a0, a2, .Leac	# a0: scratch reg, a2: sp
1158
1159	_bgeui	a6, SYS_XTENSA_COUNT, .Lill
1160	_bnei	a6, SYS_XTENSA_ATOMIC_CMP_SWP, .Lnswp
1161
1162	/* Fall through for ATOMIC_CMP_SWP. */
1163
1164.Lswp:	/* Atomic compare and swap */
1165
1166EX(.Leac) l32i	a0, a3, 0		# read old value
1167	bne	a0, a4, 1f		# same as old value? jump
1168EX(.Leac) s32i	a5, a3, 0		# different, modify value
1169	l32i	a7, a2, PT_AREG7	# restore a7
1170	l32i	a0, a2, PT_AREG0	# restore a0
1171	movi	a2, 1			# and return 1
1172	rfe
1173
11741:	l32i	a7, a2, PT_AREG7	# restore a7
1175	l32i	a0, a2, PT_AREG0	# restore a0
1176	movi	a2, 0			# return 0 (note that we cannot set
1177	rfe
1178
1179.Lnswp:	/* Atomic set, add, and exg_add. */
1180
1181EX(.Leac) l32i	a7, a3, 0		# orig
1182	addi	a6, a6, -SYS_XTENSA_ATOMIC_SET
1183	add	a0, a4, a7		# + arg
1184	moveqz	a0, a4, a6		# set
1185	addi	a6, a6, SYS_XTENSA_ATOMIC_SET
1186EX(.Leac) s32i	a0, a3, 0		# write new value
1187
1188	mov	a0, a2
1189	mov	a2, a7
1190	l32i	a7, a0, PT_AREG7	# restore a7
1191	l32i	a0, a0, PT_AREG0	# restore a0
1192	rfe
1193
1194.Leac:	l32i	a7, a2, PT_AREG7	# restore a7
1195	l32i	a0, a2, PT_AREG0	# restore a0
1196	movi	a2, -EFAULT
1197	rfe
1198
1199.Lill:	l32i	a7, a2, PT_AREG7	# restore a7
1200	l32i	a0, a2, PT_AREG0	# restore a0
1201	movi	a2, -EINVAL
1202	rfe
1203
1204ENDPROC(fast_syscall_xtensa)
1205
1206#else /* CONFIG_FAST_SYSCALL_XTENSA */
1207
1208ENTRY(fast_syscall_xtensa)
1209
1210	l32i    a0, a2, PT_AREG0        # restore a0
1211	movi	a2, -ENOSYS
1212	rfe
1213
1214ENDPROC(fast_syscall_xtensa)
1215
1216#endif /* CONFIG_FAST_SYSCALL_XTENSA */
1217
1218
1219/* fast_syscall_spill_registers.
1220 *
1221 * Entry condition:
1222 *
1223 *   a0:	trashed, original value saved on stack (PT_AREG0)
1224 *   a1:	a1
1225 *   a2:	new stack pointer, original in DEPC
1226 *   a3:	a3
1227 *   depc:	a2, original value saved on stack (PT_DEPC)
1228 *   excsave_1:	dispatch table
1229 *
1230 * Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler.
1231 */
1232
1233#if defined(CONFIG_FAST_SYSCALL_SPILL_REGISTERS) && \
1234		defined(USER_SUPPORT_WINDOWED)
1235
1236ENTRY(fast_syscall_spill_registers)
1237
1238	/* Register a FIXUP handler (pass current wb as a parameter) */
1239
1240	xsr	a3, excsave1
1241	movi	a0, fast_syscall_spill_registers_fixup
1242	s32i	a0, a3, EXC_TABLE_FIXUP
1243	rsr	a0, windowbase
1244	s32i	a0, a3, EXC_TABLE_PARAM
1245	xsr	a3, excsave1		# restore a3 and excsave_1
1246
1247	/* Save a3, a4 and SAR on stack. */
1248
1249	rsr	a0, sar
1250	s32i	a3, a2, PT_AREG3
1251	s32i	a0, a2, PT_SAR
1252
1253	/* The spill routine might clobber a4, a7, a8, a11, a12, and a15. */
1254
1255	s32i	a4, a2, PT_AREG4
1256	s32i	a7, a2, PT_AREG7
1257	s32i	a8, a2, PT_AREG8
1258	s32i	a11, a2, PT_AREG11
1259	s32i	a12, a2, PT_AREG12
1260	s32i	a15, a2, PT_AREG15
1261
1262	/*
1263	 * Rotate ws so that the current windowbase is at bit 0.
1264	 * Assume ws = xxxwww1yy (www1 current window frame).
1265	 * Rotate ws right so that a4 = yyxxxwww1.
1266	 */
1267
1268	rsr	a0, windowbase
1269	rsr	a3, windowstart		# a3 = xxxwww1yy
1270	ssr	a0			# holds WB
1271	slli	a0, a3, WSBITS
1272	or	a3, a3, a0		# a3 = xxxwww1yyxxxwww1yy
1273	srl	a3, a3			# a3 = 00xxxwww1yyxxxwww1
1274
1275	/* We are done if there are no more than the current register frame. */
1276
1277	extui	a3, a3, 1, WSBITS-1	# a3 = 0yyxxxwww
1278	movi	a0, (1 << (WSBITS-1))
1279	_beqz	a3, .Lnospill		# only one active frame? jump
1280
1281	/* We want 1 at the top, so that we return to the current windowbase */
1282
1283	or	a3, a3, a0		# 1yyxxxwww
1284
1285	/* Skip empty frames - get 'oldest' WINDOWSTART-bit. */
1286
1287	wsr	a3, windowstart		# save shifted windowstart
1288	neg	a0, a3
1289	and	a3, a0, a3		# first bit set from right: 000010000
1290
1291	ffs_ws	a0, a3			# a0: shifts to skip empty frames
1292	movi	a3, WSBITS
1293	sub	a0, a3, a0		# WSBITS-a0:number of 0-bits from right
1294	ssr	a0			# save in SAR for later.
1295
1296	rsr	a3, windowbase
1297	add	a3, a3, a0
1298	wsr	a3, windowbase
1299	rsync
1300
1301	rsr	a3, windowstart
1302	srl	a3, a3			# shift windowstart
1303
1304	/* WB is now just one frame below the oldest frame in the register
1305	   window. WS is shifted so the oldest frame is in bit 0, thus, WB
1306	   and WS differ by one 4-register frame. */
1307
1308	/* Save frames. Depending what call was used (call4, call8, call12),
1309	 * we have to save 4,8. or 12 registers.
1310	 */
1311
1312
1313.Lloop: _bbsi.l	a3, 1, .Lc4
1314	_bbci.l	a3, 2, .Lc12
1315
1316.Lc8:	s32e	a4, a13, -16
1317	l32e	a4, a5, -12
1318	s32e	a8, a4, -32
1319	s32e	a5, a13, -12
1320	s32e	a6, a13, -8
1321	s32e	a7, a13, -4
1322	s32e	a9, a4, -28
1323	s32e	a10, a4, -24
1324	s32e	a11, a4, -20
1325	srli	a11, a3, 2		# shift windowbase by 2
1326	rotw	2
1327	_bnei	a3, 1, .Lloop
1328	j	.Lexit
1329
1330.Lc4:	s32e	a4, a9, -16
1331	s32e	a5, a9, -12
1332	s32e	a6, a9, -8
1333	s32e	a7, a9, -4
1334
1335	srli	a7, a3, 1
1336	rotw	1
1337	_bnei	a3, 1, .Lloop
1338	j	.Lexit
1339
1340.Lc12:	_bbci.l	a3, 3, .Linvalid_mask	# bit 2 shouldn't be zero!
1341
1342	/* 12-register frame (call12) */
1343
1344	l32e	a0, a5, -12
1345	s32e	a8, a0, -48
1346	mov	a8, a0
1347
1348	s32e	a9, a8, -44
1349	s32e	a10, a8, -40
1350	s32e	a11, a8, -36
1351	s32e	a12, a8, -32
1352	s32e	a13, a8, -28
1353	s32e	a14, a8, -24
1354	s32e	a15, a8, -20
1355	srli	a15, a3, 3
1356
1357	/* The stack pointer for a4..a7 is out of reach, so we rotate the
1358	 * window, grab the stackpointer, and rotate back.
1359	 * Alternatively, we could also use the following approach, but that
1360	 * makes the fixup routine much more complicated:
1361	 * rotw	1
1362	 * s32e	a0, a13, -16
1363	 * ...
1364	 * rotw 2
1365	 */
1366
1367	rotw	1
1368	mov	a4, a13
1369	rotw	-1
1370
1371	s32e	a4, a8, -16
1372	s32e	a5, a8, -12
1373	s32e	a6, a8, -8
1374	s32e	a7, a8, -4
1375
1376	rotw	3
1377
1378	_beqi	a3, 1, .Lexit
1379	j	.Lloop
1380
1381.Lexit:
1382
1383	/* Done. Do the final rotation and set WS */
1384
1385	rotw	1
1386	rsr	a3, windowbase
1387	ssl	a3
1388	movi	a3, 1
1389	sll	a3, a3
1390	wsr	a3, windowstart
1391.Lnospill:
1392
1393	/* Advance PC, restore registers and SAR, and return from exception. */
1394
1395	l32i	a3, a2, PT_SAR
1396	l32i	a0, a2, PT_AREG0
1397	wsr	a3, sar
1398	l32i	a3, a2, PT_AREG3
1399
1400	/* Restore clobbered registers. */
1401
1402	l32i	a4, a2, PT_AREG4
1403	l32i	a7, a2, PT_AREG7
1404	l32i	a8, a2, PT_AREG8
1405	l32i	a11, a2, PT_AREG11
1406	l32i	a12, a2, PT_AREG12
1407	l32i	a15, a2, PT_AREG15
1408
1409	movi	a2, 0
1410	rfe
1411
1412.Linvalid_mask:
1413
1414	/* We get here because of an unrecoverable error in the window
1415	 * registers, so set up a dummy frame and kill the user application.
1416	 * Note: We assume EXC_TABLE_KSTK contains a valid stack pointer.
1417	 */
1418
1419	movi	a0, 1
1420	movi	a1, 0
1421
1422	wsr	a0, windowstart
1423	wsr	a1, windowbase
1424	rsync
1425
1426	movi	a0, 0
1427
1428	rsr	a3, excsave1
1429	l32i	a1, a3, EXC_TABLE_KSTK
1430
1431	movi	a4, KERNEL_PS_WOE_MASK | LOCKLEVEL
1432	wsr	a4, ps
1433	rsync
1434
1435	movi	abi_arg0, SIGSEGV
1436	abi_call	make_task_dead
1437
1438	/* shouldn't return, so panic */
1439
1440	wsr	a0, excsave1
1441	call0	unrecoverable_exception		# should not return
14421:	j	1b
1443
1444
1445ENDPROC(fast_syscall_spill_registers)
1446
1447/* Fixup handler.
1448 *
1449 * We get here if the spill routine causes an exception, e.g. tlb miss.
1450 * We basically restore WINDOWBASE and WINDOWSTART to the condition when
1451 * we entered the spill routine and jump to the user exception handler.
1452 *
1453 * Note that we only need to restore the bits in windowstart that have not
1454 * been spilled yet by the _spill_register routine. Luckily, a3 contains a
1455 * rotated windowstart with only those bits set for frames that haven't been
1456 * spilled yet. Because a3 is rotated such that bit 0 represents the register
1457 * frame for the current windowbase - 1, we need to rotate a3 left by the
1458 * value of the current windowbase + 1 and move it to windowstart.
1459 *
1460 * a0: value of depc, original value in depc
1461 * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE
1462 * a3: exctable, original value in excsave1
1463 */
1464
1465ENTRY(fast_syscall_spill_registers_fixup)
1466
1467	rsr	a2, windowbase	# get current windowbase (a2 is saved)
1468	xsr	a0, depc	# restore depc and a0
1469	ssl	a2		# set shift (32 - WB)
1470
1471	/* We need to make sure the current registers (a0-a3) are preserved.
1472	 * To do this, we simply set the bit for the current window frame
1473	 * in WS, so that the exception handlers save them to the task stack.
1474	 *
1475	 * Note: we use a3 to set the windowbase, so we take a special care
1476	 * of it, saving it in the original _spill_registers frame across
1477	 * the exception handler call.
1478	 */
1479
1480	xsr	a3, excsave1	# get spill-mask
1481	slli	a3, a3, 1	# shift left by one
1482	addi	a3, a3, 1	# set the bit for the current window frame
1483
1484	slli	a2, a3, 32-WSBITS
1485	src	a2, a3, a2	# a2 = xxwww1yyxxxwww1yy......
1486	wsr	a2, windowstart	# set corrected windowstart
1487
1488	srli	a3, a3, 1
1489	rsr	a2, excsave1
1490	l32i	a2, a2, EXC_TABLE_DOUBLE_SAVE	# restore a2
1491	xsr	a2, excsave1
1492	s32i	a3, a2, EXC_TABLE_DOUBLE_SAVE	# save a3
1493	l32i	a3, a2, EXC_TABLE_PARAM	# original WB (in user task)
1494	xsr	a2, excsave1
1495
1496	/* Return to the original (user task) WINDOWBASE.
1497	 * We leave the following frame behind:
1498	 * a0, a1, a2	same
1499	 * a3:		trashed (saved in EXC_TABLE_DOUBLE_SAVE)
1500	 * depc:	depc (we have to return to that address)
1501	 * excsave_1:	exctable
1502	 */
1503
1504	wsr	a3, windowbase
1505	rsync
1506
1507	/* We are now in the original frame when we entered _spill_registers:
1508	 *  a0: return address
1509	 *  a1: used, stack pointer
1510	 *  a2: kernel stack pointer
1511	 *  a3: available
1512	 *  depc: exception address
1513	 *  excsave: exctable
1514	 * Note: This frame might be the same as above.
1515	 */
1516
1517	/* Setup stack pointer. */
1518
1519	addi	a2, a2, -PT_USER_SIZE
1520	s32i	a0, a2, PT_AREG0
1521
1522	/* Make sure we return to this fixup handler. */
1523
1524	movi	a3, fast_syscall_spill_registers_fixup_return
1525	s32i	a3, a2, PT_DEPC		# setup depc
1526
1527	/* Jump to the exception handler. */
1528
1529	rsr	a3, excsave1
1530	rsr	a0, exccause
1531	addx4	a0, a0, a3              	# find entry in table
1532	l32i	a0, a0, EXC_TABLE_FAST_USER     # load handler
1533	l32i	a3, a3, EXC_TABLE_DOUBLE_SAVE
1534	jx	a0
1535
1536ENDPROC(fast_syscall_spill_registers_fixup)
1537
1538ENTRY(fast_syscall_spill_registers_fixup_return)
1539
1540	/* When we return here, all registers have been restored (a2: DEPC) */
1541
1542	wsr	a2, depc		# exception address
1543
1544	/* Restore fixup handler. */
1545
1546	rsr	a2, excsave1
1547	s32i	a3, a2, EXC_TABLE_DOUBLE_SAVE
1548	movi	a3, fast_syscall_spill_registers_fixup
1549	s32i	a3, a2, EXC_TABLE_FIXUP
1550	rsr	a3, windowbase
1551	s32i	a3, a2, EXC_TABLE_PARAM
1552	l32i	a2, a2, EXC_TABLE_KSTK
1553
1554	/* Load WB at the time the exception occurred. */
1555
1556	rsr	a3, sar			# WB is still in SAR
1557	neg	a3, a3
1558	wsr	a3, windowbase
1559	rsync
1560
1561	rsr	a3, excsave1
1562	l32i	a3, a3, EXC_TABLE_DOUBLE_SAVE
1563
1564	rfde
1565
1566ENDPROC(fast_syscall_spill_registers_fixup_return)
1567
1568#else /* CONFIG_FAST_SYSCALL_SPILL_REGISTERS */
1569
1570ENTRY(fast_syscall_spill_registers)
1571
1572	l32i    a0, a2, PT_AREG0        # restore a0
1573	movi	a2, -ENOSYS
1574	rfe
1575
1576ENDPROC(fast_syscall_spill_registers)
1577
1578#endif /* CONFIG_FAST_SYSCALL_SPILL_REGISTERS */
1579
1580#ifdef CONFIG_MMU
1581/*
1582 * We should never get here. Bail out!
1583 */
1584
1585ENTRY(fast_second_level_miss_double_kernel)
1586
15871:
1588	call0	unrecoverable_exception		# should not return
15891:	j	1b
1590
1591ENDPROC(fast_second_level_miss_double_kernel)
1592
1593/* First-level entry handler for user, kernel, and double 2nd-level
1594 * TLB miss exceptions.  Note that for now, user and kernel miss
1595 * exceptions share the same entry point and are handled identically.
1596 *
1597 * An old, less-efficient C version of this function used to exist.
1598 * We include it below, interleaved as comments, for reference.
1599 *
1600 * Entry condition:
1601 *
1602 *   a0:	trashed, original value saved on stack (PT_AREG0)
1603 *   a1:	a1
1604 *   a2:	new stack pointer, original in DEPC
1605 *   a3:	a3
1606 *   depc:	a2, original value saved on stack (PT_DEPC)
1607 *   excsave_1:	dispatch table
1608 *
1609 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
1610 *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
1611 */
1612
1613ENTRY(fast_second_level_miss)
1614
1615	/* Save a1 and a3. Note: we don't expect a double exception. */
1616
1617	s32i	a1, a2, PT_AREG1
1618	s32i	a3, a2, PT_AREG3
1619
1620	/* We need to map the page of PTEs for the user task.  Find
1621	 * the pointer to that page.  Also, it's possible for tsk->mm
1622	 * to be NULL while tsk->active_mm is nonzero if we faulted on
1623	 * a vmalloc address.  In that rare case, we must use
1624	 * active_mm instead to avoid a fault in this handler.  See
1625	 *
1626	 * http://mail.nl.linux.org/linux-mm/2002-08/msg00258.html
1627	 *   (or search Internet on "mm vs. active_mm")
1628	 *
1629	 *	if (!mm)
1630	 *		mm = tsk->active_mm;
1631	 *	pgd = pgd_offset (mm, regs->excvaddr);
1632	 *	pmd = pmd_offset (pgd, regs->excvaddr);
1633	 *	pmdval = *pmd;
1634	 */
1635
1636	GET_CURRENT(a1,a2)
1637	l32i	a0, a1, TASK_MM		# tsk->mm
1638	beqz	a0, .Lfast_second_level_miss_no_mm
1639
1640.Lfast_second_level_miss_continue:
1641	rsr	a3, excvaddr		# fault address
1642	_PGD_OFFSET(a0, a3, a1)
1643	l32i	a0, a0, 0		# read pmdval
1644	beqz	a0, .Lfast_second_level_miss_no_pmd
1645
1646	/* Read ptevaddr and convert to top of page-table page.
1647	 *
1648	 * 	vpnval = read_ptevaddr_register() & PAGE_MASK;
1649	 * 	vpnval += DTLB_WAY_PGTABLE;
1650	 *	pteval = mk_pte (virt_to_page(pmd_val(pmdval)), PAGE_KERNEL);
1651	 *	write_dtlb_entry (pteval, vpnval);
1652	 *
1653	 * The messy computation for 'pteval' above really simplifies
1654	 * into the following:
1655	 *
1656	 * pteval = ((pmdval - PAGE_OFFSET + PHYS_OFFSET) & PAGE_MASK)
1657	 *                 | PAGE_DIRECTORY
1658	 */
1659
1660	movi	a1, (PHYS_OFFSET - PAGE_OFFSET) & 0xffffffff
1661	add	a0, a0, a1		# pmdval - PAGE_OFFSET
1662	extui	a1, a0, 0, PAGE_SHIFT	# ... & PAGE_MASK
1663	xor	a0, a0, a1
1664
1665	movi	a1, _PAGE_DIRECTORY
1666	or	a0, a0, a1		# ... | PAGE_DIRECTORY
1667
1668	/*
1669	 * We utilize all three wired-ways (7-9) to hold pmd translations.
1670	 * Memory regions are mapped to the DTLBs according to bits 28 and 29.
1671	 * This allows to map the three most common regions to three different
1672	 * DTLBs:
1673	 *  0,1 -> way 7	program (0040.0000) and virtual (c000.0000)
1674	 *  2   -> way 8	shared libaries (2000.0000)
1675	 *  3   -> way 0	stack (3000.0000)
1676	 */
1677
1678	extui	a3, a3, 28, 2		# addr. bit 28 and 29	0,1,2,3
1679	rsr	a1, ptevaddr
1680	addx2	a3, a3, a3		# ->			0,3,6,9
1681	srli	a1, a1, PAGE_SHIFT
1682	extui	a3, a3, 2, 2		# ->			0,0,1,2
1683	slli	a1, a1, PAGE_SHIFT	# ptevaddr & PAGE_MASK
1684	addi	a3, a3, DTLB_WAY_PGD
1685	add	a1, a1, a3		# ... + way_number
1686
1687.Lfast_second_level_miss_wdtlb:
1688	wdtlb	a0, a1
1689	dsync
1690
1691	/* Exit critical section. */
1692.Lfast_second_level_miss_skip_wdtlb:
1693	rsr	a3, excsave1
1694	movi	a0, 0
1695	s32i	a0, a3, EXC_TABLE_FIXUP
1696
1697	/* Restore the working registers, and return. */
1698
1699	l32i	a0, a2, PT_AREG0
1700	l32i	a1, a2, PT_AREG1
1701	l32i	a3, a2, PT_AREG3
1702	l32i	a2, a2, PT_DEPC
1703
1704	bgeui	a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
1705
1706	/* Restore excsave1 and return. */
1707
1708	rsr	a2, depc
1709	rfe
1710
1711	/* Return from double exception. */
1712
17131:	xsr	a2, depc
1714	esync
1715	rfde
1716
1717.Lfast_second_level_miss_no_mm:
1718	l32i	a0, a1, TASK_ACTIVE_MM	# unlikely case mm == 0
1719	bnez	a0, .Lfast_second_level_miss_continue
1720
1721	/* Even more unlikely case active_mm == 0.
1722	 * We can get here with NMI in the middle of context_switch that
1723	 * touches vmalloc area.
1724	 */
1725	movi	a0, init_mm
1726	j	.Lfast_second_level_miss_continue
1727
1728.Lfast_second_level_miss_no_pmd:
1729#if (DCACHE_WAY_SIZE > PAGE_SIZE)
1730
1731	/* Special case for cache aliasing.
1732	 * We (should) only get here if a clear_user_page, copy_user_page
1733	 * or the aliased cache flush functions got preemptively interrupted
1734	 * by another task. Re-establish temporary mapping to the
1735	 * TLBTEMP_BASE areas.
1736	 */
1737
1738	/* We shouldn't be in a double exception */
1739
1740	l32i	a0, a2, PT_DEPC
1741	bgeui	a0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lfast_second_level_miss_slow
1742
1743	/* Make sure the exception originated in the special functions */
1744
1745	movi	a0, __tlbtemp_mapping_start
1746	rsr	a3, epc1
1747	bltu	a3, a0, .Lfast_second_level_miss_slow
1748	movi	a0, __tlbtemp_mapping_end
1749	bgeu	a3, a0, .Lfast_second_level_miss_slow
1750
1751	/* Check if excvaddr was in one of the TLBTEMP_BASE areas. */
1752
1753	movi	a3, TLBTEMP_BASE_1
1754	rsr	a0, excvaddr
1755	bltu	a0, a3, .Lfast_second_level_miss_slow
1756
1757	addi	a1, a0, -TLBTEMP_SIZE
1758	bgeu	a1, a3, .Lfast_second_level_miss_slow
1759
1760	/* Check if we have to restore an ITLB mapping. */
1761
1762	movi	a1, __tlbtemp_mapping_itlb
1763	rsr	a3, epc1
1764	sub	a3, a3, a1
1765
1766	/* Calculate VPN */
1767
1768	movi	a1, PAGE_MASK
1769	and	a1, a1, a0
1770
1771	/* Jump for ITLB entry */
1772
1773	bgez	a3, 1f
1774
1775	/* We can use up to two TLBTEMP areas, one for src and one for dst. */
1776
1777	extui	a3, a0, PAGE_SHIFT + DCACHE_ALIAS_ORDER, 1
1778	add	a1, a3, a1
1779
1780	/* PPN is in a6 for the first TLBTEMP area and in a7 for the second. */
1781
1782	mov	a0, a6
1783	movnez	a0, a7, a3
1784	j	.Lfast_second_level_miss_wdtlb
1785
1786	/* ITLB entry. We only use dst in a6. */
1787
17881:	witlb	a6, a1
1789	isync
1790	j	.Lfast_second_level_miss_skip_wdtlb
1791
1792
1793#endif	// DCACHE_WAY_SIZE > PAGE_SIZE
1794
1795	/* Invalid PGD, default exception handling */
1796.Lfast_second_level_miss_slow:
1797
1798	rsr	a1, depc
1799	s32i	a1, a2, PT_AREG2
1800	mov	a1, a2
1801
1802	rsr	a2, ps
1803	bbsi.l	a2, PS_UM_BIT, 1f
1804	call0	_kernel_exception
18051:	call0	_user_exception
1806
1807ENDPROC(fast_second_level_miss)
1808
1809/*
1810 * StoreProhibitedException
1811 *
1812 * Update the pte and invalidate the itlb mapping for this pte.
1813 *
1814 * Entry condition:
1815 *
1816 *   a0:	trashed, original value saved on stack (PT_AREG0)
1817 *   a1:	a1
1818 *   a2:	new stack pointer, original in DEPC
1819 *   a3:	a3
1820 *   depc:	a2, original value saved on stack (PT_DEPC)
1821 *   excsave_1:	dispatch table
1822 *
1823 *   PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
1824 *	     <  VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
1825 */
1826
1827ENTRY(fast_store_prohibited)
1828
1829	/* Save a1 and a3. */
1830
1831	s32i	a1, a2, PT_AREG1
1832	s32i	a3, a2, PT_AREG3
1833
1834	GET_CURRENT(a1,a2)
1835	l32i	a0, a1, TASK_MM		# tsk->mm
1836	beqz	a0, .Lfast_store_no_mm
1837
1838.Lfast_store_continue:
1839	rsr	a1, excvaddr		# fault address
1840	_PGD_OFFSET(a0, a1, a3)
1841	l32i	a0, a0, 0
1842	beqz	a0, .Lfast_store_slow
1843
1844	/*
1845	 * Note that we test _PAGE_WRITABLE_BIT only if PTE is present
1846	 * and is not PAGE_NONE. See pgtable.h for possible PTE layouts.
1847	 */
1848
1849	_PTE_OFFSET(a0, a1, a3)
1850	l32i	a3, a0, 0		# read pteval
1851	movi	a1, _PAGE_CA_INVALID
1852	ball	a3, a1, .Lfast_store_slow
1853	bbci.l	a3, _PAGE_WRITABLE_BIT, .Lfast_store_slow
1854
1855	movi	a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE
1856	or	a3, a3, a1
1857	rsr	a1, excvaddr
1858	s32i	a3, a0, 0
1859
1860	/* We need to flush the cache if we have page coloring. */
1861#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
1862	dhwb	a0, 0
1863#endif
1864	pdtlb	a0, a1
1865	wdtlb	a3, a0
1866
1867	/* Exit critical section. */
1868
1869	movi	a0, 0
1870	rsr	a3, excsave1
1871	s32i	a0, a3, EXC_TABLE_FIXUP
1872
1873	/* Restore the working registers, and return. */
1874
1875	l32i	a3, a2, PT_AREG3
1876	l32i	a1, a2, PT_AREG1
1877	l32i	a0, a2, PT_AREG0
1878	l32i	a2, a2, PT_DEPC
1879
1880	bgeui	a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
1881	rsr	a2, depc
1882	rfe
1883
1884	/* Double exception. Restore FIXUP handler and return. */
1885
18861:	xsr	a2, depc
1887	esync
1888	rfde
1889
1890.Lfast_store_no_mm:
1891	l32i	a0, a1, TASK_ACTIVE_MM	# unlikely case mm == 0
1892	j	.Lfast_store_continue
1893
1894	/* If there was a problem, handle fault in C */
1895.Lfast_store_slow:
1896	rsr	a1, excvaddr
1897	pdtlb	a0, a1
1898	bbci.l	a0, DTLB_HIT_BIT, 1f
1899	idtlb	a0
19001:
1901	rsr	a3, depc	# still holds a2
1902	s32i	a3, a2, PT_AREG2
1903	mov	a1, a2
1904
1905	rsr	a2, ps
1906	bbsi.l	a2, PS_UM_BIT, 1f
1907	call0	_kernel_exception
19081:	call0	_user_exception
1909
1910ENDPROC(fast_store_prohibited)
1911
1912#endif /* CONFIG_MMU */
1913
1914	.text
1915/*
1916 * System Calls.
1917 *
1918 * void system_call (struct pt_regs* regs, int exccause)
1919 *                            a2                 a3
1920 */
1921	.literal_position
1922
1923ENTRY(system_call)
1924
1925#if defined(__XTENSA_WINDOWED_ABI__)
1926	abi_entry_default
1927#elif defined(__XTENSA_CALL0_ABI__)
1928	abi_entry(12)
1929
1930	s32i	a0, sp, 0
1931	s32i	abi_saved0, sp, 4
1932	s32i	abi_saved1, sp, 8
1933	mov	abi_saved0, a2
1934#else
1935#error Unsupported Xtensa ABI
1936#endif
1937
1938	/* regs->syscall = regs->areg[2] */
1939
1940	l32i	a7, abi_saved0, PT_AREG2
1941	s32i	a7, abi_saved0, PT_SYSCALL
1942
1943	GET_THREAD_INFO(a4, a1)
1944	l32i	abi_saved1, a4, TI_FLAGS
1945	movi	a4, _TIF_WORK_MASK
1946	and	abi_saved1, abi_saved1, a4
1947	beqz	abi_saved1, 1f
1948
1949	mov	abi_arg0, abi_saved0
1950	abi_call	do_syscall_trace_enter
1951	beqz	abi_rv, .Lsyscall_exit
1952	l32i	a7, abi_saved0, PT_SYSCALL
1953
19541:
1955	/* syscall = sys_call_table[syscall_nr] */
1956
1957	movi	a4, sys_call_table
1958	movi	a5, __NR_syscalls
1959	movi	abi_rv, -ENOSYS
1960	bgeu	a7, a5, 1f
1961
1962	addx4	a4, a7, a4
1963	l32i	abi_tmp0, a4, 0
1964
1965	/* Load args: arg0 - arg5 are passed via regs. */
1966
1967	l32i	abi_arg0, abi_saved0, PT_AREG6
1968	l32i	abi_arg1, abi_saved0, PT_AREG3
1969	l32i	abi_arg2, abi_saved0, PT_AREG4
1970	l32i	abi_arg3, abi_saved0, PT_AREG5
1971	l32i	abi_arg4, abi_saved0, PT_AREG8
1972	l32i	abi_arg5, abi_saved0, PT_AREG9
1973
1974	abi_callx	abi_tmp0
1975
19761:	/* regs->areg[2] = return_value */
1977
1978	s32i	abi_rv, abi_saved0, PT_AREG2
1979	bnez	abi_saved1, 1f
1980.Lsyscall_exit:
1981#if defined(__XTENSA_WINDOWED_ABI__)
1982	abi_ret_default
1983#elif defined(__XTENSA_CALL0_ABI__)
1984	l32i	a0, sp, 0
1985	l32i	abi_saved0, sp, 4
1986	l32i	abi_saved1, sp, 8
1987	abi_ret(12)
1988#else
1989#error Unsupported Xtensa ABI
1990#endif
1991
19921:
1993	mov	abi_arg0, abi_saved0
1994	abi_call	do_syscall_trace_leave
1995	j	.Lsyscall_exit
1996
1997ENDPROC(system_call)
1998
1999/*
2000 * Spill live registers on the kernel stack macro.
2001 *
2002 * Entry condition: ps.woe is set, ps.excm is cleared
2003 * Exit condition: windowstart has single bit set
2004 * May clobber: a12, a13
2005 */
2006	.macro	spill_registers_kernel
2007
2008#if XCHAL_NUM_AREGS > 16
2009	call12	1f
2010	_j	2f
2011	retw
2012	.align	4
20131:
2014	_entry	a1, 48
2015	addi	a12, a0, 3
2016#if XCHAL_NUM_AREGS > 32
2017	.rept	(XCHAL_NUM_AREGS - 32) / 12
2018	_entry	a1, 48
2019	mov	a12, a0
2020	.endr
2021#endif
2022	_entry	a1, 16
2023#if XCHAL_NUM_AREGS % 12 == 0
2024	mov	a8, a8
2025#elif XCHAL_NUM_AREGS % 12 == 4
2026	mov	a12, a12
2027#elif XCHAL_NUM_AREGS % 12 == 8
2028	mov	a4, a4
2029#endif
2030	retw
20312:
2032#else
2033	mov	a12, a12
2034#endif
2035	.endm
2036
2037/*
2038 * Task switch.
2039 *
2040 * struct task*  _switch_to (struct task* prev, struct task* next)
2041 *         a2                              a2                 a3
2042 */
2043
2044ENTRY(_switch_to)
2045
2046#if defined(__XTENSA_WINDOWED_ABI__)
2047	abi_entry(XTENSA_SPILL_STACK_RESERVE)
2048#elif defined(__XTENSA_CALL0_ABI__)
2049	abi_entry(16)
2050
2051	s32i	a12, sp, 0
2052	s32i	a13, sp, 4
2053	s32i	a14, sp, 8
2054	s32i	a15, sp, 12
2055#else
2056#error Unsupported Xtensa ABI
2057#endif
2058	mov	a11, a3			# and 'next' (a3)
2059
2060	l32i	a4, a2, TASK_THREAD_INFO
2061	l32i	a5, a3, TASK_THREAD_INFO
2062
2063	save_xtregs_user a4 a6 a8 a9 a12 a13 THREAD_XTREGS_USER
2064
2065#if THREAD_RA > 1020 || THREAD_SP > 1020
2066	addi	a10, a2, TASK_THREAD
2067	s32i	a0, a10, THREAD_RA - TASK_THREAD	# save return address
2068	s32i	a1, a10, THREAD_SP - TASK_THREAD	# save stack pointer
2069#else
2070	s32i	a0, a2, THREAD_RA	# save return address
2071	s32i	a1, a2, THREAD_SP	# save stack pointer
2072#endif
2073
2074#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP)
2075	movi	a6, __stack_chk_guard
2076	l32i	a8, a3, TASK_STACK_CANARY
2077	s32i	a8, a6, 0
2078#endif
2079
2080	/* Disable ints while we manipulate the stack pointer. */
2081
2082	irq_save a14, a3
2083	rsync
2084
2085	/* Switch CPENABLE */
2086
2087#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
2088	l32i	a3, a5, THREAD_CPENABLE
2089#ifdef CONFIG_SMP
2090	beqz	a3, 1f
2091	memw			# pairs with memw (2) in fast_coprocessor
2092	l32i	a6, a5, THREAD_CP_OWNER_CPU
2093	l32i	a7, a5, THREAD_CPU
2094	beq	a6, a7, 1f	# load 0 into CPENABLE if current CPU is not the owner
2095	movi	a3, 0
20961:
2097#endif
2098	wsr	a3, cpenable
2099#endif
2100
2101#if XCHAL_HAVE_EXCLUSIVE
2102	l32i	a3, a5, THREAD_ATOMCTL8
2103	getex	a3
2104	s32i	a3, a4, THREAD_ATOMCTL8
2105#endif
2106
2107	/* Flush register file. */
2108
2109#if defined(__XTENSA_WINDOWED_ABI__)
2110	spill_registers_kernel
2111#endif
2112
2113	/* Set kernel stack (and leave critical section)
2114	 * Note: It's save to set it here. The stack will not be overwritten
2115	 *       because the kernel stack will only be loaded again after
2116	 *       we return from kernel space.
2117	 */
2118
2119	rsr	a3, excsave1		# exc_table
2120	addi	a7, a5, PT_REGS_OFFSET
2121	s32i	a7, a3, EXC_TABLE_KSTK
2122
2123	/* restore context of the task 'next' */
2124
2125	l32i	a0, a11, THREAD_RA	# restore return address
2126	l32i	a1, a11, THREAD_SP	# restore stack pointer
2127
2128	load_xtregs_user a5 a6 a8 a9 a12 a13 THREAD_XTREGS_USER
2129
2130	wsr	a14, ps
2131	rsync
2132
2133#if defined(__XTENSA_WINDOWED_ABI__)
2134	abi_ret(XTENSA_SPILL_STACK_RESERVE)
2135#elif defined(__XTENSA_CALL0_ABI__)
2136	l32i	a12, sp, 0
2137	l32i	a13, sp, 4
2138	l32i	a14, sp, 8
2139	l32i	a15, sp, 12
2140	abi_ret(16)
2141#else
2142#error Unsupported Xtensa ABI
2143#endif
2144
2145ENDPROC(_switch_to)
2146
2147ENTRY(ret_from_fork)
2148
2149	/* void schedule_tail (struct task_struct *prev)
2150	 * Note: prev is still in abi_arg0 (return value from fake call frame)
2151	 */
2152	abi_call	schedule_tail
2153
2154	mov		abi_arg0, a1
2155	abi_call	do_syscall_trace_leave
2156	j		common_exception_return
2157
2158ENDPROC(ret_from_fork)
2159
2160/*
2161 * Kernel thread creation helper
2162 * On entry, set up by copy_thread: abi_saved0 = thread_fn,
2163 * abi_saved1 = thread_fn arg. Left from _switch_to: abi_arg0 = prev
2164 */
2165ENTRY(ret_from_kernel_thread)
2166
2167	abi_call	schedule_tail
2168	mov		abi_arg0, abi_saved1
2169	abi_callx	abi_saved0
2170	j		common_exception_return
2171
2172ENDPROC(ret_from_kernel_thread)
2173
2174#ifdef CONFIG_HIBERNATION
2175
2176	.section	.bss, "aw"
2177	.align	4
2178.Lsaved_regs:
2179#if defined(__XTENSA_WINDOWED_ABI__)
2180	.fill	2, 4
2181#elif defined(__XTENSA_CALL0_ABI__)
2182	.fill	6, 4
2183#else
2184#error Unsupported Xtensa ABI
2185#endif
2186	.align	XCHAL_NCP_SA_ALIGN
2187.Lsaved_user_regs:
2188	.fill	XTREGS_USER_SIZE, 1
2189
2190	.previous
2191
2192ENTRY(swsusp_arch_suspend)
2193
2194	abi_entry_default
2195
2196	movi		a2, .Lsaved_regs
2197	movi		a3, .Lsaved_user_regs
2198	s32i		a0, a2, 0
2199	s32i		a1, a2, 4
2200	save_xtregs_user a3 a4 a5 a6 a7 a8 0
2201#if defined(__XTENSA_WINDOWED_ABI__)
2202	spill_registers_kernel
2203#elif defined(__XTENSA_CALL0_ABI__)
2204	s32i		a12, a2, 8
2205	s32i		a13, a2, 12
2206	s32i		a14, a2, 16
2207	s32i		a15, a2, 20
2208#else
2209#error Unsupported Xtensa ABI
2210#endif
2211	abi_call	swsusp_save
2212	mov		a2, abi_rv
2213	abi_ret_default
2214
2215ENDPROC(swsusp_arch_suspend)
2216
2217ENTRY(swsusp_arch_resume)
2218
2219	abi_entry_default
2220
2221#if defined(__XTENSA_WINDOWED_ABI__)
2222	spill_registers_kernel
2223#endif
2224
2225	movi		a2, restore_pblist
2226	l32i		a2, a2, 0
2227
2228.Lcopy_pbe:
2229	l32i		a3, a2, PBE_ADDRESS
2230	l32i		a4, a2, PBE_ORIG_ADDRESS
2231
2232	__loopi		a3, a9, PAGE_SIZE, 16
2233	l32i		a5, a3, 0
2234	l32i		a6, a3, 4
2235	l32i		a7, a3, 8
2236	l32i		a8, a3, 12
2237	addi		a3, a3, 16
2238	s32i		a5, a4, 0
2239	s32i		a6, a4, 4
2240	s32i		a7, a4, 8
2241	s32i		a8, a4, 12
2242	addi		a4, a4, 16
2243	__endl		a3, a9
2244
2245	l32i		a2, a2, PBE_NEXT
2246	bnez		a2, .Lcopy_pbe
2247
2248	movi		a2, .Lsaved_regs
2249	movi		a3, .Lsaved_user_regs
2250	l32i		a0, a2, 0
2251	l32i		a1, a2, 4
2252	load_xtregs_user a3 a4 a5 a6 a7 a8 0
2253#if defined(__XTENSA_CALL0_ABI__)
2254	l32i		a12, a2, 8
2255	l32i		a13, a2, 12
2256	l32i		a14, a2, 16
2257	l32i		a15, a2, 20
2258#endif
2259	movi		a2, 0
2260	abi_ret_default
2261
2262ENDPROC(swsusp_arch_resume)
2263
2264#endif
2265