xref: /linux/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h (revision 1ac731c529cd4d6adbce134754b51ff7d822b145)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  *
4  *  Copyright (C) 2010 John Crispin <john@phrozen.org>
5  */
6 
7 #ifndef _LTQ_XWAY_H__
8 #define _LTQ_XWAY_H__
9 
10 #ifdef CONFIG_SOC_TYPE_XWAY
11 
12 #include <lantiq.h>
13 
14 /* Chip IDs */
15 #define SOC_ID_DANUBE1		0x129
16 #define SOC_ID_DANUBE2		0x12B
17 #define SOC_ID_TWINPASS		0x12D
18 #define SOC_ID_AMAZON_SE_1	0x152 /* 50601 */
19 #define SOC_ID_AMAZON_SE_2	0x153 /* 50600 */
20 #define SOC_ID_ARX188		0x16C
21 #define SOC_ID_ARX168_1		0x16D
22 #define SOC_ID_ARX168_2		0x16E
23 #define SOC_ID_ARX182		0x16F
24 #define SOC_ID_GRX188		0x170
25 #define SOC_ID_GRX168		0x171
26 
27 #define SOC_ID_VRX288		0x1C0 /* v1.1 */
28 #define SOC_ID_VRX282		0x1C1 /* v1.1 */
29 #define SOC_ID_VRX268		0x1C2 /* v1.1 */
30 #define SOC_ID_GRX268		0x1C8 /* v1.1 */
31 #define SOC_ID_GRX288		0x1C9 /* v1.1 */
32 #define SOC_ID_VRX288_2		0x00B /* v1.2 */
33 #define SOC_ID_VRX268_2		0x00C /* v1.2 */
34 #define SOC_ID_GRX288_2		0x00D /* v1.2 */
35 #define SOC_ID_GRX282_2		0x00E /* v1.2 */
36 #define SOC_ID_VRX220		0x000
37 
38 #define SOC_ID_ARX362		0x004
39 #define SOC_ID_ARX368		0x005
40 #define SOC_ID_ARX382		0x007
41 #define SOC_ID_ARX388		0x008
42 #define SOC_ID_URX388		0x009
43 #define SOC_ID_GRX383		0x010
44 #define SOC_ID_GRX369		0x011
45 #define SOC_ID_GRX387		0x00F
46 #define SOC_ID_GRX389		0x012
47 
48  /* SoC Types */
49 #define SOC_TYPE_DANUBE		0x01
50 #define SOC_TYPE_TWINPASS	0x02
51 #define SOC_TYPE_AR9		0x03
52 #define SOC_TYPE_VR9		0x04 /* v1.1 */
53 #define SOC_TYPE_VR9_2		0x05 /* v1.2 */
54 #define SOC_TYPE_AMAZON_SE	0x06
55 #define SOC_TYPE_AR10		0x07
56 #define SOC_TYPE_GRX390		0x08
57 #define SOC_TYPE_VRX220		0x09
58 
59 /* BOOT_SEL - find what boot media we have */
60 #define BS_EXT_ROM		0x0
61 #define BS_FLASH		0x1
62 #define BS_MII0			0x2
63 #define BS_PCI			0x3
64 #define BS_UART1		0x4
65 #define BS_SPI			0x5
66 #define BS_NAND			0x6
67 #define BS_RMII0		0x7
68 
69 /* helpers used to access the cgu */
70 #define ltq_cgu_w32(x, y)	ltq_w32((x), ltq_cgu_membase + (y))
71 #define ltq_cgu_r32(x)		ltq_r32(ltq_cgu_membase + (x))
72 extern __iomem void *ltq_cgu_membase;
73 
74 /*
75  * during early_printk no ioremap is possible
76  * let's use KSEG1 instead
77  */
78 #define LTQ_ASC1_BASE_ADDR	0x1E100C00
79 #define LTQ_EARLY_ASC		KSEG1ADDR(LTQ_ASC1_BASE_ADDR)
80 
81 /* EBU - external bus unit */
82 #define LTQ_EBU_BUSCON0		0x0060
83 #define LTQ_EBU_PCC_CON		0x0090
84 #define LTQ_EBU_PCC_IEN		0x00A4
85 #define LTQ_EBU_PCC_ISTAT	0x00A0
86 #define LTQ_EBU_BUSCON1		0x0064
87 #define LTQ_EBU_ADDRSEL1	0x0024
88 #define EBU_WRDIS		0x80000000
89 
90 /* WDT */
91 #define LTQ_RST_CAUSE_WDTRST	0x20
92 
93 /* MPS - multi processor unit (voice) */
94 #define LTQ_MPS_BASE_ADDR	(KSEG1 + 0x1F107000)
95 #define LTQ_MPS_CHIPID		((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
96 
97 /* request a non-gpio and set the PIO config */
98 #define PMU_PPE			 BIT(13)
99 extern void ltq_pmu_enable(unsigned int module);
100 extern void ltq_pmu_disable(unsigned int module);
101 
102 #endif /* CONFIG_SOC_TYPE_XWAY */
103 #endif /* _LTQ_XWAY_H__ */
104