xref: /linux/arch/mips/include/asm/dec/kn05.h (revision 75bf465f0bc33e9b776a46d6a1b9b990f5fb7c37)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  *	include/asm-mips/dec/kn05.h
4  *
5  *	DECstation/DECsystem 5000/260 (4max+ or KN05), 5000/150 (4min
6  *	or KN04-BA), Personal DECstation/DECsystem 5000/50 (4maxine or
7  *	KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC
8  *	definitions.
9  *
10  *	Copyright (C) 2002, 2003, 2005, 2008  Maciej W. Rozycki
11  *
12  *	WARNING!  All this information is pure guesswork based on the
13  *	ROM.  It is provided here in hope it will give someone some
14  *	food for thought.  No documentation for the KN05 nor the KN04
15  *	module has been located so far.
16  */
17 #ifndef __ASM_MIPS_DEC_KN05_H
18 #define __ASM_MIPS_DEC_KN05_H
19 
20 #include <asm/dec/ioasic_addrs.h>
21 
22 /*
23  * The oncard MB (Memory Buffer) ASIC provides an additional address
24  * decoder.  Certain address ranges within the "high" 16 slots are
25  * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA.
26  * Others are handled locally.  "Low" slots are always passed.
27  */
28 #define KN4K_SLOT_BASE	0x1fc00000
29 
30 #define KN4K_MB_ROM	(0*IOASIC_SLOT_SIZE)	/* KN05/KN04 card ROM */
31 #define KN4K_IOCTL	(1*IOASIC_SLOT_SIZE)	/* I/O ASIC */
32 #define KN4K_ESAR	(2*IOASIC_SLOT_SIZE)	/* LANCE MAC address chip */
33 #define KN4K_LANCE	(3*IOASIC_SLOT_SIZE)	/* LANCE Ethernet */
34 #define KN4K_MB_INT	(4*IOASIC_SLOT_SIZE)	/* MB interrupt register */
35 #define KN4K_MB_EA	(5*IOASIC_SLOT_SIZE)	/* MB error address? */
36 #define KN4K_MB_EC	(6*IOASIC_SLOT_SIZE)	/* MB error ??? */
37 #define KN4K_MB_CSR	(7*IOASIC_SLOT_SIZE)	/* MB control & status */
38 #define KN4K_RES_08	(8*IOASIC_SLOT_SIZE)	/* unused? */
39 #define KN4K_RES_09	(9*IOASIC_SLOT_SIZE)	/* unused? */
40 #define KN4K_RES_10	(10*IOASIC_SLOT_SIZE)	/* unused? */
41 #define KN4K_RES_11	(11*IOASIC_SLOT_SIZE)	/* unused? */
42 #define KN4K_SCSI	(12*IOASIC_SLOT_SIZE)	/* ASC SCSI */
43 #define KN4K_RES_13	(13*IOASIC_SLOT_SIZE)	/* unused? */
44 #define KN4K_RES_14	(14*IOASIC_SLOT_SIZE)	/* unused? */
45 #define KN4K_RES_15	(15*IOASIC_SLOT_SIZE)	/* unused? */
46 
47 /*
48  * MB ASIC interrupt bits.
49  */
50 #define KN4K_MB_INR_MB		4	/* ??? */
51 #define KN4K_MB_INR_MT		3	/* memory, I/O bus read/write errors */
52 #define KN4K_MB_INR_RES_2	2	/* unused */
53 #define KN4K_MB_INR_RTC		1	/* RTC */
54 #define KN4K_MB_INR_TC		0	/* I/O ASIC cascade */
55 
56 /*
57  * Bits for the MB interrupt register.
58  * The register appears read-only.
59  */
60 #define KN4K_MB_INT_IRQ		(0x1f<<0)	/* CPU Int[4:0] status. */
61 #define KN4K_MB_INT_IRQ_N(n)	(1<<(n))	/* Individual status bits. */
62 
63 /*
64  * Bits for the MB control & status register.
65  * Set to 0x00bf8001 for KN05 and to 0x003f8000 for KN04 by the firmware.
66  */
67 #define KN4K_MB_CSR_PF		(1<<0)		/* PreFetching enable? */
68 #define KN4K_MB_CSR_F		(1<<1)		/* ??? */
69 #define KN4K_MB_CSR_ECC		(0xff<<2)	/* ??? */
70 #define KN4K_MB_CSR_OD		(1<<10)		/* ??? */
71 #define KN4K_MB_CSR_CP		(1<<11)		/* ??? */
72 #define KN4K_MB_CSR_UNC		(1<<12)		/* ??? */
73 #define KN4K_MB_CSR_IM		(1<<13)		/* ??? */
74 #define KN4K_MB_CSR_NC		(1<<14)		/* ??? */
75 #define KN4K_MB_CSR_EE		(1<<15)		/* (bus) Exception Enable? */
76 #define KN4K_MB_CSR_MSK		(0x1f<<16)	/* CPU Int[4:0] mask */
77 #define KN4K_MB_CSR_MSK_N(n)	(1<<((n)+16))	/* Individual mask bits. */
78 #define KN4K_MB_CSR_FW		(1<<21)		/* ??? */
79 #define KN4K_MB_CSR_W		(1<<31)		/* ??? */
80 
81 #endif /* __ASM_MIPS_DEC_KN05_H */
82