xref: /linux/drivers/pinctrl/pinctrl-k210.c (revision 2d32fba02e0e5b67fb3a4ea51dde80c0db83f1c1)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2020 Sean Anderson <seanga2@gmail.com>
4  * Copyright (c) 2020 Western Digital Corporation or its affiliates.
5  */
6 #include <linux/bitfield.h>
7 #include <linux/clk.h>
8 #include <linux/io.h>
9 #include <linux/mfd/syscon.h>
10 #include <linux/of.h>
11 #include <linux/platform_device.h>
12 #include <linux/regmap.h>
13 #include <linux/seq_file.h>
14 #include <linux/slab.h>
15 
16 #include <linux/pinctrl/pinconf-generic.h>
17 #include <linux/pinctrl/pinconf.h>
18 #include <linux/pinctrl/pinctrl.h>
19 #include <linux/pinctrl/pinmux.h>
20 
21 #include <dt-bindings/pinctrl/k210-fpioa.h>
22 
23 #include "core.h"
24 #include "pinconf.h"
25 #include "pinctrl-utils.h"
26 
27 /*
28  * The K210 only implements 8 drive levels, even though
29  * there is register space for 16
30  */
31 #define K210_PC_DRIVE_MASK	GENMASK(11, 8)
32 #define K210_PC_DRIVE_SHIFT	8
33 #define K210_PC_DRIVE_0		(0 << K210_PC_DRIVE_SHIFT)
34 #define K210_PC_DRIVE_1		(1 << K210_PC_DRIVE_SHIFT)
35 #define K210_PC_DRIVE_2		(2 << K210_PC_DRIVE_SHIFT)
36 #define K210_PC_DRIVE_3		(3 << K210_PC_DRIVE_SHIFT)
37 #define K210_PC_DRIVE_4		(4 << K210_PC_DRIVE_SHIFT)
38 #define K210_PC_DRIVE_5		(5 << K210_PC_DRIVE_SHIFT)
39 #define K210_PC_DRIVE_6		(6 << K210_PC_DRIVE_SHIFT)
40 #define K210_PC_DRIVE_7		(7 << K210_PC_DRIVE_SHIFT)
41 #define K210_PC_DRIVE_MAX	7
42 #define K210_PC_MODE_MASK	GENMASK(23, 12)
43 
44 /*
45  * output enabled == PC_OE & (PC_OE_INV ^ FUNCTION_OE)
46  * where FUNCTION_OE is a physical signal from the function.
47  */
48 #define K210_PC_OE		BIT(12) /* Output Enable */
49 #define K210_PC_OE_INV		BIT(13) /* INVert Output Enable */
50 #define K210_PC_DO_OE		BIT(14) /* set Data Out to Output Enable sig */
51 #define K210_PC_DO_INV		BIT(15) /* INVert final Data Output */
52 #define K210_PC_PU		BIT(16) /* Pull Up */
53 #define K210_PC_PD		BIT(17) /* Pull Down */
54 /* Strong pull up not implemented on K210 */
55 #define K210_PC_SL		BIT(19) /* reduce SLew rate */
56 /* Same semantics as OE above */
57 #define K210_PC_IE		BIT(20) /* Input Enable */
58 #define K210_PC_IE_INV		BIT(21) /* INVert Input Enable */
59 #define K210_PC_DI_INV		BIT(22) /* INVert Data Input */
60 #define K210_PC_ST		BIT(23) /* Schmitt Trigger */
61 #define K210_PC_DI		BIT(31) /* raw Data Input */
62 
63 #define K210_PC_BIAS_MASK	(K210_PC_PU & K210_PC_PD)
64 
65 #define K210_PC_MODE_IN		(K210_PC_IE | K210_PC_ST)
66 #define K210_PC_MODE_OUT	(K210_PC_DRIVE_7 | K210_PC_OE)
67 #define K210_PC_MODE_I2C	(K210_PC_MODE_IN | K210_PC_SL | \
68 				 K210_PC_OE | K210_PC_PU)
69 #define K210_PC_MODE_SCCB	(K210_PC_MODE_I2C | \
70 				 K210_PC_OE_INV | K210_PC_IE_INV)
71 #define K210_PC_MODE_SPI	(K210_PC_MODE_IN | K210_PC_IE_INV | \
72 				 K210_PC_MODE_OUT | K210_PC_OE_INV)
73 #define K210_PC_MODE_GPIO	(K210_PC_MODE_IN | K210_PC_MODE_OUT)
74 
75 #define K210_PG_FUNC		GENMASK(7, 0)
76 #define K210_PG_DO		BIT(8)
77 #define K210_PG_PIN		GENMASK(22, 16)
78 
79 /*
80  * struct k210_fpioa: Kendryte K210 FPIOA memory mapped registers
81  * @pins: 48 32-bits IO pin registers
82  * @tie_en: 256 (one per function) input tie enable bits
83  * @tie_val: 256 (one per function) input tie value bits
84  */
85 struct k210_fpioa {
86 	u32 pins[48];
87 	u32 tie_en[8];
88 	u32 tie_val[8];
89 };
90 
91 struct k210_fpioa_data {
92 
93 	struct device *dev;
94 	struct pinctrl_dev *pctl;
95 
96 	struct k210_fpioa __iomem *fpioa;
97 	struct regmap *sysctl_map;
98 	u32 power_offset;
99 };
100 
101 #define K210_PIN_NAME(i)	("IO_" #i)
102 #define K210_PIN(i)		[(i)] = PINCTRL_PIN((i), K210_PIN_NAME(i))
103 
104 static const struct pinctrl_pin_desc k210_pins[] = {
105 	K210_PIN(0),  K210_PIN(1),  K210_PIN(2),
106 	K210_PIN(3),  K210_PIN(4),  K210_PIN(5),
107 	K210_PIN(6),  K210_PIN(7),  K210_PIN(8),
108 	K210_PIN(9),  K210_PIN(10), K210_PIN(11),
109 	K210_PIN(12), K210_PIN(13), K210_PIN(14),
110 	K210_PIN(15), K210_PIN(16), K210_PIN(17),
111 	K210_PIN(18), K210_PIN(19), K210_PIN(20),
112 	K210_PIN(21), K210_PIN(22), K210_PIN(23),
113 	K210_PIN(24), K210_PIN(25), K210_PIN(26),
114 	K210_PIN(27), K210_PIN(28), K210_PIN(29),
115 	K210_PIN(30), K210_PIN(31), K210_PIN(32),
116 	K210_PIN(33), K210_PIN(34), K210_PIN(35),
117 	K210_PIN(36), K210_PIN(37), K210_PIN(38),
118 	K210_PIN(39), K210_PIN(40), K210_PIN(41),
119 	K210_PIN(42), K210_PIN(43), K210_PIN(44),
120 	K210_PIN(45), K210_PIN(46), K210_PIN(47)
121 };
122 
123 #define K210_NPINS ARRAY_SIZE(k210_pins)
124 
125 /*
126  * Pin groups: each of the 48 programmable pins is a group.
127  * To this are added 8 power domain groups, which for the purposes of
128  * the pin subsystem, contain no pins. The power domain groups only exist
129  * to set the power level. The id should never be used (since there are
130  * no pins 48-55).
131  */
132 static const char *const k210_group_names[] = {
133 	/* The first 48 groups are for pins, one each */
134 	K210_PIN_NAME(0),  K210_PIN_NAME(1),  K210_PIN_NAME(2),
135 	K210_PIN_NAME(3),  K210_PIN_NAME(4),  K210_PIN_NAME(5),
136 	K210_PIN_NAME(6),  K210_PIN_NAME(7),  K210_PIN_NAME(8),
137 	K210_PIN_NAME(9),  K210_PIN_NAME(10), K210_PIN_NAME(11),
138 	K210_PIN_NAME(12), K210_PIN_NAME(13), K210_PIN_NAME(14),
139 	K210_PIN_NAME(15), K210_PIN_NAME(16), K210_PIN_NAME(17),
140 	K210_PIN_NAME(18), K210_PIN_NAME(19), K210_PIN_NAME(20),
141 	K210_PIN_NAME(21), K210_PIN_NAME(22), K210_PIN_NAME(23),
142 	K210_PIN_NAME(24), K210_PIN_NAME(25), K210_PIN_NAME(26),
143 	K210_PIN_NAME(27), K210_PIN_NAME(28), K210_PIN_NAME(29),
144 	K210_PIN_NAME(30), K210_PIN_NAME(31), K210_PIN_NAME(32),
145 	K210_PIN_NAME(33), K210_PIN_NAME(34), K210_PIN_NAME(35),
146 	K210_PIN_NAME(36), K210_PIN_NAME(37), K210_PIN_NAME(38),
147 	K210_PIN_NAME(39), K210_PIN_NAME(40), K210_PIN_NAME(41),
148 	K210_PIN_NAME(42), K210_PIN_NAME(43), K210_PIN_NAME(44),
149 	K210_PIN_NAME(45), K210_PIN_NAME(46), K210_PIN_NAME(47),
150 	[48] = "A0", [49] = "A1", [50] = "A2",
151 	[51] = "B3", [52] = "B4", [53] = "B5",
152 	[54] = "C6", [55] = "C7"
153 };
154 
155 #define K210_NGROUPS	ARRAY_SIZE(k210_group_names)
156 
157 enum k210_pinctrl_mode_id {
158 	K210_PC_DEFAULT_DISABLED,
159 	K210_PC_DEFAULT_IN,
160 	K210_PC_DEFAULT_IN_TIE,
161 	K210_PC_DEFAULT_OUT,
162 	K210_PC_DEFAULT_I2C,
163 	K210_PC_DEFAULT_SCCB,
164 	K210_PC_DEFAULT_SPI,
165 	K210_PC_DEFAULT_GPIO,
166 	K210_PC_DEFAULT_INT13,
167 };
168 
169 #define K210_PC_DEFAULT(mode) \
170 	[K210_PC_DEFAULT_##mode] = K210_PC_MODE_##mode
171 
172 static const u32 k210_pinconf_mode_id_to_mode[] = {
173 	[K210_PC_DEFAULT_DISABLED] = 0,
174 	K210_PC_DEFAULT(IN),
175 	[K210_PC_DEFAULT_IN_TIE] = K210_PC_MODE_IN,
176 	K210_PC_DEFAULT(OUT),
177 	K210_PC_DEFAULT(I2C),
178 	K210_PC_DEFAULT(SCCB),
179 	K210_PC_DEFAULT(SPI),
180 	K210_PC_DEFAULT(GPIO),
181 	[K210_PC_DEFAULT_INT13] = K210_PC_MODE_IN | K210_PC_PU,
182 };
183 
184 #undef K210_PC_DEFAULT
185 
186 /*
187  * Pin functions configuration information.
188  */
189 struct k210_pcf_info {
190 	char name[15];
191 	u8 mode_id;
192 };
193 
194 #define K210_FUNC(id, mode)				\
195 	[K210_PCF_##id] = {				\
196 		.name = #id,				\
197 		.mode_id = K210_PC_DEFAULT_##mode	\
198 	}
199 
200 static const struct k210_pcf_info k210_pcf_infos[] = {
201 	K210_FUNC(JTAG_TCLK,		IN),
202 	K210_FUNC(JTAG_TDI,		IN),
203 	K210_FUNC(JTAG_TMS,		IN),
204 	K210_FUNC(JTAG_TDO,		OUT),
205 	K210_FUNC(SPI0_D0,		SPI),
206 	K210_FUNC(SPI0_D1,		SPI),
207 	K210_FUNC(SPI0_D2,		SPI),
208 	K210_FUNC(SPI0_D3,		SPI),
209 	K210_FUNC(SPI0_D4,		SPI),
210 	K210_FUNC(SPI0_D5,		SPI),
211 	K210_FUNC(SPI0_D6,		SPI),
212 	K210_FUNC(SPI0_D7,		SPI),
213 	K210_FUNC(SPI0_SS0,		OUT),
214 	K210_FUNC(SPI0_SS1,		OUT),
215 	K210_FUNC(SPI0_SS2,		OUT),
216 	K210_FUNC(SPI0_SS3,		OUT),
217 	K210_FUNC(SPI0_ARB,		IN_TIE),
218 	K210_FUNC(SPI0_SCLK,		OUT),
219 	K210_FUNC(UARTHS_RX,		IN),
220 	K210_FUNC(UARTHS_TX,		OUT),
221 	K210_FUNC(RESV6,		IN),
222 	K210_FUNC(RESV7,		IN),
223 	K210_FUNC(CLK_SPI1,		OUT),
224 	K210_FUNC(CLK_I2C1,		OUT),
225 	K210_FUNC(GPIOHS0,		GPIO),
226 	K210_FUNC(GPIOHS1,		GPIO),
227 	K210_FUNC(GPIOHS2,		GPIO),
228 	K210_FUNC(GPIOHS3,		GPIO),
229 	K210_FUNC(GPIOHS4,		GPIO),
230 	K210_FUNC(GPIOHS5,		GPIO),
231 	K210_FUNC(GPIOHS6,		GPIO),
232 	K210_FUNC(GPIOHS7,		GPIO),
233 	K210_FUNC(GPIOHS8,		GPIO),
234 	K210_FUNC(GPIOHS9,		GPIO),
235 	K210_FUNC(GPIOHS10,		GPIO),
236 	K210_FUNC(GPIOHS11,		GPIO),
237 	K210_FUNC(GPIOHS12,		GPIO),
238 	K210_FUNC(GPIOHS13,		GPIO),
239 	K210_FUNC(GPIOHS14,		GPIO),
240 	K210_FUNC(GPIOHS15,		GPIO),
241 	K210_FUNC(GPIOHS16,		GPIO),
242 	K210_FUNC(GPIOHS17,		GPIO),
243 	K210_FUNC(GPIOHS18,		GPIO),
244 	K210_FUNC(GPIOHS19,		GPIO),
245 	K210_FUNC(GPIOHS20,		GPIO),
246 	K210_FUNC(GPIOHS21,		GPIO),
247 	K210_FUNC(GPIOHS22,		GPIO),
248 	K210_FUNC(GPIOHS23,		GPIO),
249 	K210_FUNC(GPIOHS24,		GPIO),
250 	K210_FUNC(GPIOHS25,		GPIO),
251 	K210_FUNC(GPIOHS26,		GPIO),
252 	K210_FUNC(GPIOHS27,		GPIO),
253 	K210_FUNC(GPIOHS28,		GPIO),
254 	K210_FUNC(GPIOHS29,		GPIO),
255 	K210_FUNC(GPIOHS30,		GPIO),
256 	K210_FUNC(GPIOHS31,		GPIO),
257 	K210_FUNC(GPIO0,		GPIO),
258 	K210_FUNC(GPIO1,		GPIO),
259 	K210_FUNC(GPIO2,		GPIO),
260 	K210_FUNC(GPIO3,		GPIO),
261 	K210_FUNC(GPIO4,		GPIO),
262 	K210_FUNC(GPIO5,		GPIO),
263 	K210_FUNC(GPIO6,		GPIO),
264 	K210_FUNC(GPIO7,		GPIO),
265 	K210_FUNC(UART1_RX,		IN),
266 	K210_FUNC(UART1_TX,		OUT),
267 	K210_FUNC(UART2_RX,		IN),
268 	K210_FUNC(UART2_TX,		OUT),
269 	K210_FUNC(UART3_RX,		IN),
270 	K210_FUNC(UART3_TX,		OUT),
271 	K210_FUNC(SPI1_D0,		SPI),
272 	K210_FUNC(SPI1_D1,		SPI),
273 	K210_FUNC(SPI1_D2,		SPI),
274 	K210_FUNC(SPI1_D3,		SPI),
275 	K210_FUNC(SPI1_D4,		SPI),
276 	K210_FUNC(SPI1_D5,		SPI),
277 	K210_FUNC(SPI1_D6,		SPI),
278 	K210_FUNC(SPI1_D7,		SPI),
279 	K210_FUNC(SPI1_SS0,		OUT),
280 	K210_FUNC(SPI1_SS1,		OUT),
281 	K210_FUNC(SPI1_SS2,		OUT),
282 	K210_FUNC(SPI1_SS3,		OUT),
283 	K210_FUNC(SPI1_ARB,		IN_TIE),
284 	K210_FUNC(SPI1_SCLK,		OUT),
285 	K210_FUNC(SPI2_D0,		SPI),
286 	K210_FUNC(SPI2_SS,		IN),
287 	K210_FUNC(SPI2_SCLK,		IN),
288 	K210_FUNC(I2S0_MCLK,		OUT),
289 	K210_FUNC(I2S0_SCLK,		OUT),
290 	K210_FUNC(I2S0_WS,		OUT),
291 	K210_FUNC(I2S0_IN_D0,		IN),
292 	K210_FUNC(I2S0_IN_D1,		IN),
293 	K210_FUNC(I2S0_IN_D2,		IN),
294 	K210_FUNC(I2S0_IN_D3,		IN),
295 	K210_FUNC(I2S0_OUT_D0,		OUT),
296 	K210_FUNC(I2S0_OUT_D1,		OUT),
297 	K210_FUNC(I2S0_OUT_D2,		OUT),
298 	K210_FUNC(I2S0_OUT_D3,		OUT),
299 	K210_FUNC(I2S1_MCLK,		OUT),
300 	K210_FUNC(I2S1_SCLK,		OUT),
301 	K210_FUNC(I2S1_WS,		OUT),
302 	K210_FUNC(I2S1_IN_D0,		IN),
303 	K210_FUNC(I2S1_IN_D1,		IN),
304 	K210_FUNC(I2S1_IN_D2,		IN),
305 	K210_FUNC(I2S1_IN_D3,		IN),
306 	K210_FUNC(I2S1_OUT_D0,		OUT),
307 	K210_FUNC(I2S1_OUT_D1,		OUT),
308 	K210_FUNC(I2S1_OUT_D2,		OUT),
309 	K210_FUNC(I2S1_OUT_D3,		OUT),
310 	K210_FUNC(I2S2_MCLK,		OUT),
311 	K210_FUNC(I2S2_SCLK,		OUT),
312 	K210_FUNC(I2S2_WS,		OUT),
313 	K210_FUNC(I2S2_IN_D0,		IN),
314 	K210_FUNC(I2S2_IN_D1,		IN),
315 	K210_FUNC(I2S2_IN_D2,		IN),
316 	K210_FUNC(I2S2_IN_D3,		IN),
317 	K210_FUNC(I2S2_OUT_D0,		OUT),
318 	K210_FUNC(I2S2_OUT_D1,		OUT),
319 	K210_FUNC(I2S2_OUT_D2,		OUT),
320 	K210_FUNC(I2S2_OUT_D3,		OUT),
321 	K210_FUNC(RESV0,		DISABLED),
322 	K210_FUNC(RESV1,		DISABLED),
323 	K210_FUNC(RESV2,		DISABLED),
324 	K210_FUNC(RESV3,		DISABLED),
325 	K210_FUNC(RESV4,		DISABLED),
326 	K210_FUNC(RESV5,		DISABLED),
327 	K210_FUNC(I2C0_SCLK,		I2C),
328 	K210_FUNC(I2C0_SDA,		I2C),
329 	K210_FUNC(I2C1_SCLK,		I2C),
330 	K210_FUNC(I2C1_SDA,		I2C),
331 	K210_FUNC(I2C2_SCLK,		I2C),
332 	K210_FUNC(I2C2_SDA,		I2C),
333 	K210_FUNC(DVP_XCLK,		OUT),
334 	K210_FUNC(DVP_RST,		OUT),
335 	K210_FUNC(DVP_PWDN,		OUT),
336 	K210_FUNC(DVP_VSYNC,		IN),
337 	K210_FUNC(DVP_HSYNC,		IN),
338 	K210_FUNC(DVP_PCLK,		IN),
339 	K210_FUNC(DVP_D0,		IN),
340 	K210_FUNC(DVP_D1,		IN),
341 	K210_FUNC(DVP_D2,		IN),
342 	K210_FUNC(DVP_D3,		IN),
343 	K210_FUNC(DVP_D4,		IN),
344 	K210_FUNC(DVP_D5,		IN),
345 	K210_FUNC(DVP_D6,		IN),
346 	K210_FUNC(DVP_D7,		IN),
347 	K210_FUNC(SCCB_SCLK,		SCCB),
348 	K210_FUNC(SCCB_SDA,		SCCB),
349 	K210_FUNC(UART1_CTS,		IN),
350 	K210_FUNC(UART1_DSR,		IN),
351 	K210_FUNC(UART1_DCD,		IN),
352 	K210_FUNC(UART1_RI,		IN),
353 	K210_FUNC(UART1_SIR_IN,		IN),
354 	K210_FUNC(UART1_DTR,		OUT),
355 	K210_FUNC(UART1_RTS,		OUT),
356 	K210_FUNC(UART1_OUT2,		OUT),
357 	K210_FUNC(UART1_OUT1,		OUT),
358 	K210_FUNC(UART1_SIR_OUT,	OUT),
359 	K210_FUNC(UART1_BAUD,		OUT),
360 	K210_FUNC(UART1_RE,		OUT),
361 	K210_FUNC(UART1_DE,		OUT),
362 	K210_FUNC(UART1_RS485_EN,	OUT),
363 	K210_FUNC(UART2_CTS,		IN),
364 	K210_FUNC(UART2_DSR,		IN),
365 	K210_FUNC(UART2_DCD,		IN),
366 	K210_FUNC(UART2_RI,		IN),
367 	K210_FUNC(UART2_SIR_IN,		IN),
368 	K210_FUNC(UART2_DTR,		OUT),
369 	K210_FUNC(UART2_RTS,		OUT),
370 	K210_FUNC(UART2_OUT2,		OUT),
371 	K210_FUNC(UART2_OUT1,		OUT),
372 	K210_FUNC(UART2_SIR_OUT,	OUT),
373 	K210_FUNC(UART2_BAUD,		OUT),
374 	K210_FUNC(UART2_RE,		OUT),
375 	K210_FUNC(UART2_DE,		OUT),
376 	K210_FUNC(UART2_RS485_EN,	OUT),
377 	K210_FUNC(UART3_CTS,		IN),
378 	K210_FUNC(UART3_DSR,		IN),
379 	K210_FUNC(UART3_DCD,		IN),
380 	K210_FUNC(UART3_RI,		IN),
381 	K210_FUNC(UART3_SIR_IN,		IN),
382 	K210_FUNC(UART3_DTR,		OUT),
383 	K210_FUNC(UART3_RTS,		OUT),
384 	K210_FUNC(UART3_OUT2,		OUT),
385 	K210_FUNC(UART3_OUT1,		OUT),
386 	K210_FUNC(UART3_SIR_OUT,	OUT),
387 	K210_FUNC(UART3_BAUD,		OUT),
388 	K210_FUNC(UART3_RE,		OUT),
389 	K210_FUNC(UART3_DE,		OUT),
390 	K210_FUNC(UART3_RS485_EN,	OUT),
391 	K210_FUNC(TIMER0_TOGGLE1,	OUT),
392 	K210_FUNC(TIMER0_TOGGLE2,	OUT),
393 	K210_FUNC(TIMER0_TOGGLE3,	OUT),
394 	K210_FUNC(TIMER0_TOGGLE4,	OUT),
395 	K210_FUNC(TIMER1_TOGGLE1,	OUT),
396 	K210_FUNC(TIMER1_TOGGLE2,	OUT),
397 	K210_FUNC(TIMER1_TOGGLE3,	OUT),
398 	K210_FUNC(TIMER1_TOGGLE4,	OUT),
399 	K210_FUNC(TIMER2_TOGGLE1,	OUT),
400 	K210_FUNC(TIMER2_TOGGLE2,	OUT),
401 	K210_FUNC(TIMER2_TOGGLE3,	OUT),
402 	K210_FUNC(TIMER2_TOGGLE4,	OUT),
403 	K210_FUNC(CLK_SPI2,		OUT),
404 	K210_FUNC(CLK_I2C2,		OUT),
405 	K210_FUNC(INTERNAL0,		OUT),
406 	K210_FUNC(INTERNAL1,		OUT),
407 	K210_FUNC(INTERNAL2,		OUT),
408 	K210_FUNC(INTERNAL3,		OUT),
409 	K210_FUNC(INTERNAL4,		OUT),
410 	K210_FUNC(INTERNAL5,		OUT),
411 	K210_FUNC(INTERNAL6,		OUT),
412 	K210_FUNC(INTERNAL7,		OUT),
413 	K210_FUNC(INTERNAL8,		OUT),
414 	K210_FUNC(INTERNAL9,		IN),
415 	K210_FUNC(INTERNAL10,		IN),
416 	K210_FUNC(INTERNAL11,		IN),
417 	K210_FUNC(INTERNAL12,		IN),
418 	K210_FUNC(INTERNAL13,		INT13),
419 	K210_FUNC(INTERNAL14,		I2C),
420 	K210_FUNC(INTERNAL15,		IN),
421 	K210_FUNC(INTERNAL16,		IN),
422 	K210_FUNC(INTERNAL17,		IN),
423 	K210_FUNC(CONSTANT,		DISABLED),
424 	K210_FUNC(INTERNAL18,		IN),
425 	K210_FUNC(DEBUG0,		OUT),
426 	K210_FUNC(DEBUG1,		OUT),
427 	K210_FUNC(DEBUG2,		OUT),
428 	K210_FUNC(DEBUG3,		OUT),
429 	K210_FUNC(DEBUG4,		OUT),
430 	K210_FUNC(DEBUG5,		OUT),
431 	K210_FUNC(DEBUG6,		OUT),
432 	K210_FUNC(DEBUG7,		OUT),
433 	K210_FUNC(DEBUG8,		OUT),
434 	K210_FUNC(DEBUG9,		OUT),
435 	K210_FUNC(DEBUG10,		OUT),
436 	K210_FUNC(DEBUG11,		OUT),
437 	K210_FUNC(DEBUG12,		OUT),
438 	K210_FUNC(DEBUG13,		OUT),
439 	K210_FUNC(DEBUG14,		OUT),
440 	K210_FUNC(DEBUG15,		OUT),
441 	K210_FUNC(DEBUG16,		OUT),
442 	K210_FUNC(DEBUG17,		OUT),
443 	K210_FUNC(DEBUG18,		OUT),
444 	K210_FUNC(DEBUG19,		OUT),
445 	K210_FUNC(DEBUG20,		OUT),
446 	K210_FUNC(DEBUG21,		OUT),
447 	K210_FUNC(DEBUG22,		OUT),
448 	K210_FUNC(DEBUG23,		OUT),
449 	K210_FUNC(DEBUG24,		OUT),
450 	K210_FUNC(DEBUG25,		OUT),
451 	K210_FUNC(DEBUG26,		OUT),
452 	K210_FUNC(DEBUG27,		OUT),
453 	K210_FUNC(DEBUG28,		OUT),
454 	K210_FUNC(DEBUG29,		OUT),
455 	K210_FUNC(DEBUG30,		OUT),
456 	K210_FUNC(DEBUG31,		OUT),
457 };
458 
459 #define PIN_CONFIG_OUTPUT_INVERT	(PIN_CONFIG_END + 1)
460 #define PIN_CONFIG_INPUT_INVERT		(PIN_CONFIG_END + 2)
461 
462 static const struct pinconf_generic_params k210_pinconf_custom_params[] = {
463 	{ "output-polarity-invert", PIN_CONFIG_OUTPUT_INVERT, 1 },
464 	{ "input-polarity-invert",  PIN_CONFIG_INPUT_INVERT, 1 },
465 };
466 
467 /*
468  * Max drive strength in uA.
469  */
470 static const int k210_pinconf_drive_strength[] = {
471 	[0] = 11200,
472 	[1] = 16800,
473 	[2] = 22300,
474 	[3] = 27800,
475 	[4] = 33300,
476 	[5] = 38700,
477 	[6] = 44100,
478 	[7] = 49500,
479 };
480 
k210_pinconf_get_drive(unsigned int max_strength_ua)481 static int k210_pinconf_get_drive(unsigned int max_strength_ua)
482 {
483 	int i;
484 
485 	for (i = K210_PC_DRIVE_MAX; i >= 0; i--) {
486 		if (k210_pinconf_drive_strength[i] <= max_strength_ua)
487 			return i;
488 	}
489 
490 	return -EINVAL;
491 }
492 
k210_pinmux_set_pin_function(struct pinctrl_dev * pctldev,u32 pin,u32 func)493 static void k210_pinmux_set_pin_function(struct pinctrl_dev *pctldev,
494 					 u32 pin, u32 func)
495 {
496 	struct k210_fpioa_data *pdata = pinctrl_dev_get_drvdata(pctldev);
497 	const struct k210_pcf_info *info = &k210_pcf_infos[func];
498 	u32 mode = k210_pinconf_mode_id_to_mode[info->mode_id];
499 	u32 val = func | mode;
500 
501 	dev_dbg(pdata->dev, "set pin %u function %s (%u) -> 0x%08x\n",
502 		pin, info->name, func, val);
503 
504 	writel(val, &pdata->fpioa->pins[pin]);
505 }
506 
k210_pinconf_set_param(struct pinctrl_dev * pctldev,unsigned int pin,unsigned int param,unsigned int arg)507 static int k210_pinconf_set_param(struct pinctrl_dev *pctldev,
508 				  unsigned int pin,
509 				  unsigned int param, unsigned int arg)
510 {
511 	struct k210_fpioa_data *pdata = pinctrl_dev_get_drvdata(pctldev);
512 	u32 val = readl(&pdata->fpioa->pins[pin]);
513 	int drive;
514 
515 	dev_dbg(pdata->dev, "set pin %u param %u, arg 0x%x\n",
516 		pin, param, arg);
517 
518 	switch (param) {
519 	case PIN_CONFIG_BIAS_DISABLE:
520 		val &= ~K210_PC_BIAS_MASK;
521 		break;
522 	case PIN_CONFIG_BIAS_PULL_DOWN:
523 		if (!arg)
524 			return -EINVAL;
525 		val |= K210_PC_PD;
526 		break;
527 	case PIN_CONFIG_BIAS_PULL_UP:
528 		if (!arg)
529 			return -EINVAL;
530 		val |= K210_PC_PU;
531 		break;
532 	case PIN_CONFIG_DRIVE_STRENGTH:
533 		arg *= 1000;
534 		fallthrough;
535 	case PIN_CONFIG_DRIVE_STRENGTH_UA:
536 		drive = k210_pinconf_get_drive(arg);
537 		if (drive < 0)
538 			return drive;
539 		val &= ~K210_PC_DRIVE_MASK;
540 		val |= FIELD_PREP(K210_PC_DRIVE_MASK, drive);
541 		break;
542 	case PIN_CONFIG_INPUT_ENABLE:
543 		if (arg)
544 			val |= K210_PC_IE;
545 		else
546 			val &= ~K210_PC_IE;
547 		break;
548 	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
549 		if (arg)
550 			val |= K210_PC_ST;
551 		else
552 			val &= ~K210_PC_ST;
553 		break;
554 	case PIN_CONFIG_OUTPUT:
555 		k210_pinmux_set_pin_function(pctldev, pin, K210_PCF_CONSTANT);
556 		val = readl(&pdata->fpioa->pins[pin]);
557 		val |= K210_PC_MODE_OUT;
558 		if (!arg)
559 			val |= K210_PC_DO_INV;
560 		break;
561 	case PIN_CONFIG_OUTPUT_ENABLE:
562 		if (arg)
563 			val |= K210_PC_OE;
564 		else
565 			val &= ~K210_PC_OE;
566 		break;
567 	case PIN_CONFIG_SLEW_RATE:
568 		if (arg)
569 			val |= K210_PC_SL;
570 		else
571 			val &= ~K210_PC_SL;
572 		break;
573 	case PIN_CONFIG_OUTPUT_INVERT:
574 		if (arg)
575 			val |= K210_PC_DO_INV;
576 		else
577 			val &= ~K210_PC_DO_INV;
578 		break;
579 	case PIN_CONFIG_INPUT_INVERT:
580 		if (arg)
581 			val |= K210_PC_DI_INV;
582 		else
583 			val &= ~K210_PC_DI_INV;
584 		break;
585 	default:
586 		return -EINVAL;
587 	}
588 
589 	writel(val, &pdata->fpioa->pins[pin]);
590 
591 	return 0;
592 }
593 
k210_pinconf_set(struct pinctrl_dev * pctldev,unsigned int pin,unsigned long * configs,unsigned int num_configs)594 static int k210_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
595 			    unsigned long *configs, unsigned int num_configs)
596 {
597 	unsigned int param, arg;
598 	int i, ret;
599 
600 	if (WARN_ON(pin >= K210_NPINS))
601 		return -EINVAL;
602 
603 	for (i = 0; i < num_configs; i++) {
604 		param = pinconf_to_config_param(configs[i]);
605 		arg = pinconf_to_config_argument(configs[i]);
606 		ret = k210_pinconf_set_param(pctldev, pin, param, arg);
607 		if (ret)
608 			return ret;
609 	}
610 
611 	return 0;
612 }
613 
k210_pinconf_dbg_show(struct pinctrl_dev * pctldev,struct seq_file * s,unsigned int pin)614 static void k210_pinconf_dbg_show(struct pinctrl_dev *pctldev,
615 				  struct seq_file *s, unsigned int pin)
616 {
617 	struct k210_fpioa_data *pdata = pinctrl_dev_get_drvdata(pctldev);
618 
619 	seq_printf(s, "%#x", readl(&pdata->fpioa->pins[pin]));
620 }
621 
k210_pinconf_group_set(struct pinctrl_dev * pctldev,unsigned int selector,unsigned long * configs,unsigned int num_configs)622 static int k210_pinconf_group_set(struct pinctrl_dev *pctldev,
623 				  unsigned int selector, unsigned long *configs,
624 				  unsigned int num_configs)
625 {
626 	struct k210_fpioa_data *pdata = pinctrl_dev_get_drvdata(pctldev);
627 	unsigned int param, arg;
628 	u32 bit;
629 	int i;
630 
631 	/* Pins should be configured with pinmux, not groups*/
632 	if (selector < K210_NPINS)
633 		return -EINVAL;
634 
635 	/* Otherwise it's a power domain */
636 	for (i = 0; i < num_configs; i++) {
637 		param = pinconf_to_config_param(configs[i]);
638 		if (param != PIN_CONFIG_POWER_SOURCE)
639 			return -EINVAL;
640 
641 		arg = pinconf_to_config_argument(configs[i]);
642 		bit = BIT(selector - K210_NPINS);
643 		regmap_update_bits(pdata->sysctl_map,
644 				   pdata->power_offset,
645 				   bit, arg ? bit : 0);
646 	}
647 
648 	return 0;
649 }
650 
k210_pinconf_group_dbg_show(struct pinctrl_dev * pctldev,struct seq_file * s,unsigned int selector)651 static void k210_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
652 					struct seq_file *s,
653 					unsigned int selector)
654 {
655 	struct k210_fpioa_data *pdata = pinctrl_dev_get_drvdata(pctldev);
656 	int ret;
657 	u32 val;
658 
659 	if (selector < K210_NPINS)
660 		return k210_pinconf_dbg_show(pctldev, s, selector);
661 
662 	ret = regmap_read(pdata->sysctl_map, pdata->power_offset, &val);
663 	if (ret) {
664 		dev_err(pdata->dev, "Failed to read power reg\n");
665 		return;
666 	}
667 
668 	seq_printf(s, "%s: %s V", k210_group_names[selector],
669 		   val & BIT(selector - K210_NPINS) ? "1.8" : "3.3");
670 }
671 
672 static const struct pinconf_ops k210_pinconf_ops = {
673 	.is_generic = true,
674 	.pin_config_set = k210_pinconf_set,
675 	.pin_config_group_set = k210_pinconf_group_set,
676 	.pin_config_dbg_show = k210_pinconf_dbg_show,
677 	.pin_config_group_dbg_show = k210_pinconf_group_dbg_show,
678 };
679 
k210_pinmux_get_function_count(struct pinctrl_dev * pctldev)680 static int k210_pinmux_get_function_count(struct pinctrl_dev *pctldev)
681 {
682 	return ARRAY_SIZE(k210_pcf_infos);
683 }
684 
k210_pinmux_get_function_name(struct pinctrl_dev * pctldev,unsigned int selector)685 static const char *k210_pinmux_get_function_name(struct pinctrl_dev *pctldev,
686 						 unsigned int selector)
687 {
688 	return k210_pcf_infos[selector].name;
689 }
690 
k210_pinmux_get_function_groups(struct pinctrl_dev * pctldev,unsigned int selector,const char * const ** groups,unsigned int * const num_groups)691 static int k210_pinmux_get_function_groups(struct pinctrl_dev *pctldev,
692 					   unsigned int selector,
693 					   const char * const **groups,
694 					   unsigned int * const num_groups)
695 {
696 	/* Any function can be mapped to any pin */
697 	*groups = k210_group_names;
698 	*num_groups = K210_NPINS;
699 
700 	return 0;
701 }
702 
k210_pinmux_set_mux(struct pinctrl_dev * pctldev,unsigned int function,unsigned int group)703 static int k210_pinmux_set_mux(struct pinctrl_dev *pctldev,
704 			       unsigned int function,
705 			       unsigned int group)
706 {
707 	/* Can't mux power domains */
708 	if (group >= K210_NPINS)
709 		return -EINVAL;
710 
711 	k210_pinmux_set_pin_function(pctldev, group, function);
712 
713 	return 0;
714 }
715 
716 static const struct pinmux_ops k210_pinmux_ops = {
717 	.get_functions_count = k210_pinmux_get_function_count,
718 	.get_function_name = k210_pinmux_get_function_name,
719 	.get_function_groups = k210_pinmux_get_function_groups,
720 	.set_mux = k210_pinmux_set_mux,
721 	.strict = true,
722 };
723 
k210_pinctrl_get_groups_count(struct pinctrl_dev * pctldev)724 static int k210_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
725 {
726 	return K210_NGROUPS;
727 }
728 
k210_pinctrl_get_group_name(struct pinctrl_dev * pctldev,unsigned int group)729 static const char *k210_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
730 					       unsigned int group)
731 {
732 	return k210_group_names[group];
733 }
734 
k210_pinctrl_get_group_pins(struct pinctrl_dev * pctldev,unsigned int group,const unsigned int ** pins,unsigned int * npins)735 static int k210_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
736 				       unsigned int group,
737 				       const unsigned int **pins,
738 				       unsigned int *npins)
739 {
740 	if (group >= K210_NPINS) {
741 		*pins = NULL;
742 		*npins = 0;
743 		return 0;
744 	}
745 
746 	*pins = &k210_pins[group].number;
747 	*npins = 1;
748 
749 	return 0;
750 }
751 
k210_pinctrl_pin_dbg_show(struct pinctrl_dev * pctldev,struct seq_file * s,unsigned int offset)752 static void k210_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
753 				      struct seq_file *s, unsigned int offset)
754 {
755 	seq_printf(s, "%s", dev_name(pctldev->dev));
756 }
757 
k210_pinctrl_dt_subnode_to_map(struct pinctrl_dev * pctldev,struct device_node * np,struct pinctrl_map ** map,unsigned int * reserved_maps,unsigned int * num_maps)758 static int k210_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
759 					  struct device_node *np,
760 					  struct pinctrl_map **map,
761 					  unsigned int *reserved_maps,
762 					  unsigned int *num_maps)
763 {
764 	int ret, pinmux_groups;
765 	u32 pinmux_group;
766 	unsigned long *configs = NULL;
767 	unsigned int num_configs = 0;
768 	unsigned int reserve = 0;
769 
770 	ret = of_property_count_strings(np, "groups");
771 	if (!ret)
772 		return pinconf_generic_dt_subnode_to_map(pctldev, np, map,
773 						reserved_maps, num_maps,
774 						PIN_MAP_TYPE_CONFIGS_GROUP);
775 
776 	pinmux_groups = of_property_count_u32_elems(np, "pinmux");
777 	if (pinmux_groups <= 0) {
778 		/* Ignore this node */
779 		return 0;
780 	}
781 
782 	ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
783 					      &num_configs);
784 	if (ret < 0) {
785 		dev_err(pctldev->dev, "%pOF: could not parse node property\n",
786 			np);
787 		return ret;
788 	}
789 
790 	reserve = pinmux_groups * (1 + num_configs);
791 	ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps, num_maps,
792 					reserve);
793 	if (ret < 0)
794 		goto exit;
795 
796 	of_property_for_each_u32(np, "pinmux", pinmux_group) {
797 		const char *group_name, *func_name;
798 		u32 pin = FIELD_GET(K210_PG_PIN, pinmux_group);
799 		u32 func = FIELD_GET(K210_PG_FUNC, pinmux_group);
800 
801 		if (pin >= K210_NPINS) {
802 			ret = -EINVAL;
803 			goto exit;
804 		}
805 
806 		group_name = k210_group_names[pin];
807 		func_name = k210_pcf_infos[func].name;
808 
809 		dev_dbg(pctldev->dev, "Pinmux %s: pin %u func %s\n",
810 			np->name, pin, func_name);
811 
812 		ret = pinctrl_utils_add_map_mux(pctldev, map, reserved_maps,
813 						num_maps, group_name,
814 						func_name);
815 		if (ret < 0) {
816 			dev_err(pctldev->dev, "%pOF add mux map failed %d\n",
817 				np, ret);
818 			goto exit;
819 		}
820 
821 		if (num_configs) {
822 			ret = pinctrl_utils_add_map_configs(pctldev, map,
823 					reserved_maps, num_maps, group_name,
824 					configs, num_configs,
825 					PIN_MAP_TYPE_CONFIGS_PIN);
826 			if (ret < 0) {
827 				dev_err(pctldev->dev,
828 					"%pOF add configs map failed %d\n",
829 					np, ret);
830 				goto exit;
831 			}
832 		}
833 	}
834 
835 	ret = 0;
836 
837 exit:
838 	kfree(configs);
839 	return ret;
840 }
841 
k210_pinctrl_dt_node_to_map(struct pinctrl_dev * pctldev,struct device_node * np_config,struct pinctrl_map ** map,unsigned int * num_maps)842 static int k210_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
843 				       struct device_node *np_config,
844 				       struct pinctrl_map **map,
845 				       unsigned int *num_maps)
846 {
847 	unsigned int reserved_maps;
848 	int ret;
849 
850 	reserved_maps = 0;
851 	*map = NULL;
852 	*num_maps = 0;
853 
854 	ret = k210_pinctrl_dt_subnode_to_map(pctldev, np_config, map,
855 					     &reserved_maps, num_maps);
856 	if (ret < 0)
857 		goto err;
858 
859 	for_each_available_child_of_node_scoped(np_config, np) {
860 		ret = k210_pinctrl_dt_subnode_to_map(pctldev, np, map,
861 						     &reserved_maps, num_maps);
862 		if (ret < 0)
863 			goto err;
864 	}
865 	return 0;
866 
867 err:
868 	pinctrl_utils_free_map(pctldev, *map, *num_maps);
869 	return ret;
870 }
871 
872 
873 static const struct pinctrl_ops k210_pinctrl_ops = {
874 	.get_groups_count = k210_pinctrl_get_groups_count,
875 	.get_group_name = k210_pinctrl_get_group_name,
876 	.get_group_pins = k210_pinctrl_get_group_pins,
877 	.pin_dbg_show = k210_pinctrl_pin_dbg_show,
878 	.dt_node_to_map = k210_pinctrl_dt_node_to_map,
879 	.dt_free_map = pinconf_generic_dt_free_map,
880 };
881 
882 static struct pinctrl_desc k210_pinctrl_desc = {
883 	.name = "k210-pinctrl",
884 	.pins = k210_pins,
885 	.npins = K210_NPINS,
886 	.pctlops = &k210_pinctrl_ops,
887 	.pmxops = &k210_pinmux_ops,
888 	.confops = &k210_pinconf_ops,
889 	.custom_params = k210_pinconf_custom_params,
890 	.num_custom_params = ARRAY_SIZE(k210_pinconf_custom_params),
891 };
892 
k210_fpioa_init_ties(struct k210_fpioa_data * pdata)893 static void k210_fpioa_init_ties(struct k210_fpioa_data *pdata)
894 {
895 	struct k210_fpioa __iomem *fpioa = pdata->fpioa;
896 	u32 val;
897 	int i, j;
898 
899 	dev_dbg(pdata->dev, "Init pin ties\n");
900 
901 	/* Init pin functions input ties */
902 	for (i = 0; i < ARRAY_SIZE(fpioa->tie_en); i++) {
903 		val = 0;
904 		for (j = 0; j < 32; j++) {
905 			if (k210_pcf_infos[i * 32 + j].mode_id ==
906 			    K210_PC_DEFAULT_IN_TIE) {
907 				dev_dbg(pdata->dev,
908 					"tie_en function %d (%s)\n",
909 					i * 32 + j,
910 					k210_pcf_infos[i * 32 + j].name);
911 				val |= BIT(j);
912 			}
913 		}
914 
915 		/* Set value before enable */
916 		writel(val, &fpioa->tie_val[i]);
917 		writel(val, &fpioa->tie_en[i]);
918 	}
919 }
920 
k210_fpioa_probe(struct platform_device * pdev)921 static int k210_fpioa_probe(struct platform_device *pdev)
922 {
923 	struct device *dev = &pdev->dev;
924 	struct device_node *np = dev->of_node;
925 	struct k210_fpioa_data *pdata;
926 	struct clk *clk, *pclk;
927 
928 	dev_info(dev, "K210 FPIOA pin controller\n");
929 
930 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
931 	if (!pdata)
932 		return -ENOMEM;
933 
934 	pdata->dev = dev;
935 	platform_set_drvdata(pdev, pdata);
936 
937 	pdata->fpioa = devm_platform_ioremap_resource(pdev, 0);
938 	if (IS_ERR(pdata->fpioa))
939 		return PTR_ERR(pdata->fpioa);
940 
941 	clk = devm_clk_get_enabled(dev, "ref");
942 	if (IS_ERR(clk))
943 		return PTR_ERR(clk);
944 
945 	pclk = devm_clk_get_optional_enabled(dev, "pclk");
946 	if (IS_ERR(pclk))
947 		return PTR_ERR(pclk);
948 
949 	pdata->sysctl_map =
950 		syscon_regmap_lookup_by_phandle_args(np,
951 						"canaan,k210-sysctl-power",
952 						1, &pdata->power_offset);
953 	if (IS_ERR(pdata->sysctl_map))
954 		return PTR_ERR(pdata->sysctl_map);
955 
956 	k210_fpioa_init_ties(pdata);
957 
958 	pdata->pctl = pinctrl_register(&k210_pinctrl_desc, dev, (void *)pdata);
959 	if (IS_ERR(pdata->pctl))
960 		return PTR_ERR(pdata->pctl);
961 
962 	return 0;
963 }
964 
965 static const struct of_device_id k210_fpioa_dt_ids[] = {
966 	{ .compatible = "canaan,k210-fpioa" },
967 	{ /* sentinel */ },
968 };
969 
970 static struct platform_driver k210_fpioa_driver = {
971 	.probe	= k210_fpioa_probe,
972 	.driver = {
973 		.name		= "k210-fpioa",
974 		.of_match_table	= k210_fpioa_dt_ids,
975 	},
976 };
977 builtin_platform_driver(k210_fpioa_driver);
978