1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright (c) 2017, 2019, The Linux Foundation. All rights reserved.
4 */
5
6 #include <linux/clk.h>
7 #include <linux/delay.h>
8 #include <linux/err.h>
9 #include <linux/io.h>
10 #include <linux/kernel.h>
11 #include <linux/mfd/syscon.h>
12 #include <linux/module.h>
13 #include <linux/nvmem-consumer.h>
14 #include <linux/of.h>
15 #include <linux/phy/phy.h>
16 #include <linux/platform_device.h>
17 #include <linux/regmap.h>
18 #include <linux/regulator/consumer.h>
19 #include <linux/reset.h>
20 #include <linux/slab.h>
21
22 #include <dt-bindings/phy/phy-qcom-qusb2.h>
23
24 #define QUSB2PHY_PLL 0x0
25 #define QUSB2PHY_PLL_TEST 0x04
26 #define CLK_REF_SEL BIT(7)
27
28 #define QUSB2PHY_PLL_TUNE 0x08
29 #define QUSB2PHY_PLL_USER_CTL1 0x0c
30 #define QUSB2PHY_PLL_USER_CTL2 0x10
31 #define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c
32 #define QUSB2PHY_PLL_PWR_CTRL 0x18
33
34 /* QUSB2PHY_PLL_STATUS register bits */
35 #define PLL_LOCKED BIT(5)
36
37 /* QUSB2PHY_PLL_COMMON_STATUS_ONE register bits */
38 #define CORE_READY_STATUS BIT(0)
39
40 /* QUSB2PHY_PORT_POWERDOWN register bits */
41 #define CLAMP_N_EN BIT(5)
42 #define FREEZIO_N BIT(1)
43 #define POWER_DOWN BIT(0)
44
45 /* QUSB2PHY_PWR_CTRL1 register bits */
46 #define PWR_CTRL1_VREF_SUPPLY_TRIM BIT(5)
47 #define PWR_CTRL1_CLAMP_N_EN BIT(1)
48
49 #define QUSB2PHY_REFCLK_ENABLE BIT(0)
50
51 #define PHY_CLK_SCHEME_SEL BIT(0)
52
53 /* QUSB2PHY_INTR_CTRL register bits */
54 #define DMSE_INTR_HIGH_SEL BIT(4)
55 #define DPSE_INTR_HIGH_SEL BIT(3)
56 #define CHG_DET_INTR_EN BIT(2)
57 #define DMSE_INTR_EN BIT(1)
58 #define DPSE_INTR_EN BIT(0)
59
60 /* QUSB2PHY_PLL_CORE_INPUT_OVERRIDE register bits */
61 #define CORE_PLL_EN_FROM_RESET BIT(4)
62 #define CORE_RESET BIT(5)
63 #define CORE_RESET_MUX BIT(6)
64
65 /* QUSB2PHY_IMP_CTRL1 register bits */
66 #define IMP_RES_OFFSET_MASK GENMASK(5, 0)
67 #define IMP_RES_OFFSET_SHIFT 0x0
68
69 /* QUSB2PHY_PLL_BIAS_CONTROL_2 register bits */
70 #define BIAS_CTRL2_RES_OFFSET_MASK GENMASK(5, 0)
71 #define BIAS_CTRL2_RES_OFFSET_SHIFT 0x0
72
73 /* QUSB2PHY_CHG_CONTROL_2 register bits */
74 #define CHG_CTRL2_OFFSET_MASK GENMASK(5, 4)
75 #define CHG_CTRL2_OFFSET_SHIFT 0x4
76
77 /* QUSB2PHY_PORT_TUNE1 register bits */
78 #define HSTX_TRIM_MASK GENMASK(7, 4)
79 #define HSTX_TRIM_SHIFT 0x4
80 #define PREEMPH_WIDTH_HALF_BIT BIT(2)
81 #define PREEMPHASIS_EN_MASK GENMASK(1, 0)
82 #define PREEMPHASIS_EN_SHIFT 0x0
83
84 /* QUSB2PHY_PORT_TUNE2 register bits */
85 #define HSDISC_TRIM_MASK GENMASK(1, 0)
86 #define HSDISC_TRIM_SHIFT 0x0
87
88 #define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04
89 #define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c
90 #define QUSB2PHY_PLL_CMODE 0x2c
91 #define QUSB2PHY_PLL_LOCK_DELAY 0x184
92 #define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0xb4
93 #define QUSB2PHY_PLL_BIAS_CONTROL_1 0x194
94 #define QUSB2PHY_PLL_BIAS_CONTROL_2 0x198
95 #define QUSB2PHY_PWR_CTRL2 0x214
96 #define QUSB2PHY_IMP_CTRL1 0x220
97 #define QUSB2PHY_IMP_CTRL2 0x224
98 #define QUSB2PHY_CHG_CTRL2 0x23c
99
100 struct qusb2_phy_init_tbl {
101 unsigned int offset;
102 unsigned int val;
103 /*
104 * register part of layout ?
105 * if yes, then offset gives index in the reg-layout
106 */
107 int in_layout;
108 };
109
110 #define QUSB2_PHY_INIT_CFG(o, v) \
111 { \
112 .offset = o, \
113 .val = v, \
114 }
115
116 #define QUSB2_PHY_INIT_CFG_L(o, v) \
117 { \
118 .offset = o, \
119 .val = v, \
120 .in_layout = 1, \
121 }
122
123 /* set of registers with offsets different per-PHY */
124 enum qusb2phy_reg_layout {
125 QUSB2PHY_PLL_CORE_INPUT_OVERRIDE,
126 QUSB2PHY_PLL_STATUS,
127 QUSB2PHY_PORT_TUNE1,
128 QUSB2PHY_PORT_TUNE2,
129 QUSB2PHY_PORT_TUNE3,
130 QUSB2PHY_PORT_TUNE4,
131 QUSB2PHY_PORT_TUNE5,
132 QUSB2PHY_PORT_TEST1,
133 QUSB2PHY_PORT_TEST2,
134 QUSB2PHY_PORT_POWERDOWN,
135 QUSB2PHY_INTR_CTRL,
136 };
137
138 static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
139 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
140 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xF8),
141 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xB3),
142 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
143 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xC0),
144 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
145 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
146 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
147 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
148 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
149 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
150 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
151 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
152 };
153
154 static const unsigned int ipq6018_regs_layout[] = {
155 [QUSB2PHY_PLL_STATUS] = 0x38,
156 [QUSB2PHY_PORT_TUNE1] = 0x80,
157 [QUSB2PHY_PORT_TUNE2] = 0x84,
158 [QUSB2PHY_PORT_TUNE3] = 0x88,
159 [QUSB2PHY_PORT_TUNE4] = 0x8C,
160 [QUSB2PHY_PORT_TUNE5] = 0x90,
161 [QUSB2PHY_PORT_TEST1] = 0x98,
162 [QUSB2PHY_PORT_TEST2] = 0x9C,
163 [QUSB2PHY_PORT_POWERDOWN] = 0xB4,
164 [QUSB2PHY_INTR_CTRL] = 0xBC,
165 };
166
167 static const unsigned int msm8996_regs_layout[] = {
168 [QUSB2PHY_PLL_STATUS] = 0x38,
169 [QUSB2PHY_PORT_TUNE1] = 0x80,
170 [QUSB2PHY_PORT_TUNE2] = 0x84,
171 [QUSB2PHY_PORT_TUNE3] = 0x88,
172 [QUSB2PHY_PORT_TUNE4] = 0x8c,
173 [QUSB2PHY_PORT_TUNE5] = 0x90,
174 [QUSB2PHY_PORT_TEST1] = 0xb8,
175 [QUSB2PHY_PORT_TEST2] = 0x9c,
176 [QUSB2PHY_PORT_POWERDOWN] = 0xb4,
177 [QUSB2PHY_INTR_CTRL] = 0xbc,
178 };
179
180 static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = {
181 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
182 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xb3),
183 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x83),
184 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc0),
185
186 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
187 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
188 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
189
190 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
191
192 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
193 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
194 };
195
196 static const unsigned int msm8998_regs_layout[] = {
197 [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
198 [QUSB2PHY_PLL_STATUS] = 0x1a0,
199 [QUSB2PHY_PORT_TUNE1] = 0x23c,
200 [QUSB2PHY_PORT_TUNE2] = 0x240,
201 [QUSB2PHY_PORT_TUNE3] = 0x244,
202 [QUSB2PHY_PORT_TUNE4] = 0x248,
203 [QUSB2PHY_PORT_TEST1] = 0x24c,
204 [QUSB2PHY_PORT_TEST2] = 0x250,
205 [QUSB2PHY_PORT_POWERDOWN] = 0x210,
206 [QUSB2PHY_INTR_CTRL] = 0x22c,
207 };
208
209 static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
210 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x13),
211 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
212 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
213 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
214
215 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xa5),
216 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x09),
217
218 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
219 };
220
221 static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = {
222 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8),
223 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
224 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x81),
225 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x17),
226
227 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
228 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
229 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
230
231 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
232
233 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
234 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
235 };
236
237 static const unsigned int qusb2_v2_regs_layout[] = {
238 [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
239 [QUSB2PHY_PLL_STATUS] = 0x1a0,
240 [QUSB2PHY_PORT_TUNE1] = 0x240,
241 [QUSB2PHY_PORT_TUNE2] = 0x244,
242 [QUSB2PHY_PORT_TUNE3] = 0x248,
243 [QUSB2PHY_PORT_TUNE4] = 0x24c,
244 [QUSB2PHY_PORT_TUNE5] = 0x250,
245 [QUSB2PHY_PORT_TEST1] = 0x254,
246 [QUSB2PHY_PORT_TEST2] = 0x258,
247 [QUSB2PHY_PORT_POWERDOWN] = 0x210,
248 [QUSB2PHY_INTR_CTRL] = 0x230,
249 };
250
251 static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = {
252 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03),
253 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
254 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
255 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
256 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
257 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_1, 0x40),
258 QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_2, 0x20),
259 QUSB2_PHY_INIT_CFG(QUSB2PHY_PWR_CTRL2, 0x21),
260 QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL1, 0x0),
261 QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL2, 0x58),
262
263 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x30),
264 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x29),
265 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0xca),
266 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x04),
267 QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x03),
268
269 QUSB2_PHY_INIT_CFG(QUSB2PHY_CHG_CTRL2, 0x0),
270 };
271
272 struct qusb2_phy_cfg {
273 const struct qusb2_phy_init_tbl *tbl;
274 /* number of entries in the table */
275 unsigned int tbl_num;
276 /* offset to PHY_CLK_SCHEME register in TCSR map */
277 unsigned int clk_scheme_offset;
278
279 /* array of registers with different offsets */
280 const unsigned int *regs;
281 unsigned int mask_core_ready;
282 unsigned int disable_ctrl;
283 unsigned int autoresume_en;
284
285 /* true if PHY has PLL_TEST register to select clk_scheme */
286 bool has_pll_test;
287
288 /* true if TUNE1 register must be updated by fused value, else TUNE2 */
289 bool update_tune1_with_efuse;
290
291 /* true if PHY has PLL_CORE_INPUT_OVERRIDE register to reset PLL */
292 bool has_pll_override;
293
294 /* true if PHY default clk scheme is single-ended */
295 bool se_clk_scheme_default;
296 };
297
298 static const struct qusb2_phy_cfg msm8996_phy_cfg = {
299 .tbl = msm8996_init_tbl,
300 .tbl_num = ARRAY_SIZE(msm8996_init_tbl),
301 .regs = msm8996_regs_layout,
302
303 .has_pll_test = true,
304 .se_clk_scheme_default = true,
305 .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
306 .mask_core_ready = PLL_LOCKED,
307 .autoresume_en = BIT(3),
308 };
309
310 static const struct qusb2_phy_cfg msm8998_phy_cfg = {
311 .tbl = msm8998_init_tbl,
312 .tbl_num = ARRAY_SIZE(msm8998_init_tbl),
313 .regs = msm8998_regs_layout,
314
315 .disable_ctrl = POWER_DOWN,
316 .mask_core_ready = CORE_READY_STATUS,
317 .has_pll_override = true,
318 .se_clk_scheme_default = true,
319 .autoresume_en = BIT(0),
320 .update_tune1_with_efuse = true,
321 };
322
323 static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
324 .tbl = ipq6018_init_tbl,
325 .tbl_num = ARRAY_SIZE(ipq6018_init_tbl),
326 .regs = ipq6018_regs_layout,
327
328 .disable_ctrl = POWER_DOWN,
329 .mask_core_ready = PLL_LOCKED,
330 /* autoresume not used */
331 .autoresume_en = BIT(0),
332 };
333
334 static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = {
335 .tbl = qusb2_v2_init_tbl,
336 .tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl),
337 .regs = qusb2_v2_regs_layout,
338
339 .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN |
340 POWER_DOWN),
341 .mask_core_ready = CORE_READY_STATUS,
342 .has_pll_override = true,
343 .se_clk_scheme_default = true,
344 .autoresume_en = BIT(0),
345 .update_tune1_with_efuse = true,
346 };
347
348 static const struct qusb2_phy_cfg sdm660_phy_cfg = {
349 .tbl = msm8996_init_tbl,
350 .tbl_num = ARRAY_SIZE(msm8996_init_tbl),
351 .regs = msm8996_regs_layout,
352
353 .has_pll_test = true,
354 .se_clk_scheme_default = false,
355 .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
356 .mask_core_ready = PLL_LOCKED,
357 .autoresume_en = BIT(3),
358 };
359
360 static const struct qusb2_phy_cfg sm6115_phy_cfg = {
361 .tbl = sm6115_init_tbl,
362 .tbl_num = ARRAY_SIZE(sm6115_init_tbl),
363 .regs = msm8996_regs_layout,
364
365 .has_pll_test = true,
366 .se_clk_scheme_default = true,
367 .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN),
368 .mask_core_ready = PLL_LOCKED,
369 .autoresume_en = BIT(3),
370 };
371
372 static const char * const qusb2_phy_vreg_names[] = {
373 "vdd", "vdda-pll", "vdda-phy-dpdm",
374 };
375
376 #define QUSB2_NUM_VREGS ARRAY_SIZE(qusb2_phy_vreg_names)
377
378 /* struct override_param - structure holding qusb2 v2 phy overriding param
379 * set override true if the device tree property exists and read and assign
380 * to value
381 */
382 struct override_param {
383 bool override;
384 u8 value;
385 };
386
387 /*struct override_params - structure holding qusb2 v2 phy overriding params
388 * @imp_res_offset: rescode offset to be updated in IMP_CTRL1 register
389 * @hstx_trim: HSTX_TRIM to be updated in TUNE1 register
390 * @preemphasis: Amplitude Pre-Emphasis to be updated in TUNE1 register
391 * @preemphasis_width: half/full-width Pre-Emphasis updated via TUNE1
392 * @bias_ctrl: bias ctrl to be updated in BIAS_CONTROL_2 register
393 * @charge_ctrl: charge ctrl to be updated in CHG_CTRL2 register
394 * @hsdisc_trim: disconnect threshold to be updated in TUNE2 register
395 */
396 struct override_params {
397 struct override_param imp_res_offset;
398 struct override_param hstx_trim;
399 struct override_param preemphasis;
400 struct override_param preemphasis_width;
401 struct override_param bias_ctrl;
402 struct override_param charge_ctrl;
403 struct override_param hsdisc_trim;
404 };
405
406 /**
407 * struct qusb2_phy - structure holding qusb2 phy attributes
408 *
409 * @phy: generic phy
410 * @base: iomapped memory space for qubs2 phy
411 *
412 * @cfg_ahb_clk: AHB2PHY interface clock
413 * @ref_clk: phy reference clock
414 * @iface_clk: phy interface clock
415 * @phy_reset: phy reset control
416 * @vregs: regulator supplies bulk data
417 *
418 * @tcsr: TCSR syscon register map
419 * @cell: nvmem cell containing phy tuning value
420 *
421 * @overrides: pointer to structure for all overriding tuning params
422 *
423 * @cfg: phy config data
424 * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme
425 * @phy_initialized: indicate if PHY has been initialized
426 * @mode: current PHY mode
427 */
428 struct qusb2_phy {
429 struct phy *phy;
430 void __iomem *base;
431
432 struct clk *cfg_ahb_clk;
433 struct clk *ref_clk;
434 struct clk *iface_clk;
435 struct reset_control *phy_reset;
436 struct regulator_bulk_data vregs[QUSB2_NUM_VREGS];
437
438 struct regmap *tcsr;
439 struct nvmem_cell *cell;
440
441 struct override_params overrides;
442
443 const struct qusb2_phy_cfg *cfg;
444 bool has_se_clk_scheme;
445 bool phy_initialized;
446 enum phy_mode mode;
447 };
448
qusb2_write_mask(void __iomem * base,u32 offset,u32 val,u32 mask)449 static inline void qusb2_write_mask(void __iomem *base, u32 offset,
450 u32 val, u32 mask)
451 {
452 u32 reg;
453
454 reg = readl(base + offset);
455 reg &= ~mask;
456 reg |= val & mask;
457 writel(reg, base + offset);
458
459 /* Ensure above write is completed */
460 readl(base + offset);
461 }
462
qusb2_setbits(void __iomem * base,u32 offset,u32 val)463 static inline void qusb2_setbits(void __iomem *base, u32 offset, u32 val)
464 {
465 u32 reg;
466
467 reg = readl(base + offset);
468 reg |= val;
469 writel(reg, base + offset);
470
471 /* Ensure above write is completed */
472 readl(base + offset);
473 }
474
qusb2_clrbits(void __iomem * base,u32 offset,u32 val)475 static inline void qusb2_clrbits(void __iomem *base, u32 offset, u32 val)
476 {
477 u32 reg;
478
479 reg = readl(base + offset);
480 reg &= ~val;
481 writel(reg, base + offset);
482
483 /* Ensure above write is completed */
484 readl(base + offset);
485 }
486
487 static inline
qcom_qusb2_phy_configure(void __iomem * base,const unsigned int * regs,const struct qusb2_phy_init_tbl tbl[],int num)488 void qcom_qusb2_phy_configure(void __iomem *base,
489 const unsigned int *regs,
490 const struct qusb2_phy_init_tbl tbl[], int num)
491 {
492 int i;
493
494 for (i = 0; i < num; i++) {
495 if (tbl[i].in_layout)
496 writel(tbl[i].val, base + regs[tbl[i].offset]);
497 else
498 writel(tbl[i].val, base + tbl[i].offset);
499 }
500 }
501
502 /*
503 * Update board specific PHY tuning override values if specified from
504 * device tree.
505 */
qusb2_phy_override_phy_params(struct qusb2_phy * qphy)506 static void qusb2_phy_override_phy_params(struct qusb2_phy *qphy)
507 {
508 const struct qusb2_phy_cfg *cfg = qphy->cfg;
509 struct override_params *or = &qphy->overrides;
510
511 if (or->imp_res_offset.override)
512 qusb2_write_mask(qphy->base, QUSB2PHY_IMP_CTRL1,
513 or->imp_res_offset.value << IMP_RES_OFFSET_SHIFT,
514 IMP_RES_OFFSET_MASK);
515
516 if (or->bias_ctrl.override)
517 qusb2_write_mask(qphy->base, QUSB2PHY_PLL_BIAS_CONTROL_2,
518 or->bias_ctrl.value << BIAS_CTRL2_RES_OFFSET_SHIFT,
519 BIAS_CTRL2_RES_OFFSET_MASK);
520
521 if (or->charge_ctrl.override)
522 qusb2_write_mask(qphy->base, QUSB2PHY_CHG_CTRL2,
523 or->charge_ctrl.value << CHG_CTRL2_OFFSET_SHIFT,
524 CHG_CTRL2_OFFSET_MASK);
525
526 if (or->hstx_trim.override)
527 qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
528 or->hstx_trim.value << HSTX_TRIM_SHIFT,
529 HSTX_TRIM_MASK);
530
531 if (or->preemphasis.override)
532 qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
533 or->preemphasis.value << PREEMPHASIS_EN_SHIFT,
534 PREEMPHASIS_EN_MASK);
535
536 if (or->preemphasis_width.override) {
537 if (or->preemphasis_width.value ==
538 QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT)
539 qusb2_setbits(qphy->base,
540 cfg->regs[QUSB2PHY_PORT_TUNE1],
541 PREEMPH_WIDTH_HALF_BIT);
542 else
543 qusb2_clrbits(qphy->base,
544 cfg->regs[QUSB2PHY_PORT_TUNE1],
545 PREEMPH_WIDTH_HALF_BIT);
546 }
547
548 if (or->hsdisc_trim.override)
549 qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
550 or->hsdisc_trim.value << HSDISC_TRIM_SHIFT,
551 HSDISC_TRIM_MASK);
552 }
553
554 /*
555 * Fetches HS Tx tuning value from nvmem and sets the
556 * QUSB2PHY_PORT_TUNE1/2 register.
557 * For error case, skip setting the value and use the default value.
558 */
qusb2_phy_set_tune2_param(struct qusb2_phy * qphy)559 static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
560 {
561 struct device *dev = &qphy->phy->dev;
562 const struct qusb2_phy_cfg *cfg = qphy->cfg;
563 u8 *val, hstx_trim;
564
565 /* efuse register is optional */
566 if (!qphy->cell)
567 return;
568
569 /*
570 * Read efuse register having TUNE2/1 parameter's high nibble.
571 * If efuse register shows value as 0x0 (indicating value is not
572 * fused), or if we fail to find a valid efuse register setting,
573 * then use default value for high nibble that we have already
574 * set while configuring the phy.
575 */
576 val = nvmem_cell_read(qphy->cell, NULL);
577 if (IS_ERR(val)) {
578 dev_dbg(dev, "failed to read a valid hs-tx trim value\n");
579 return;
580 }
581 hstx_trim = val[0];
582 kfree(val);
583 if (!hstx_trim) {
584 dev_dbg(dev, "failed to read a valid hs-tx trim value\n");
585 return;
586 }
587
588 /* Fused TUNE1/2 value is the higher nibble only */
589 if (cfg->update_tune1_with_efuse)
590 qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
591 hstx_trim << HSTX_TRIM_SHIFT, HSTX_TRIM_MASK);
592 else
593 qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
594 hstx_trim << HSTX_TRIM_SHIFT, HSTX_TRIM_MASK);
595 }
596
qusb2_phy_set_mode(struct phy * phy,enum phy_mode mode,int submode)597 static int qusb2_phy_set_mode(struct phy *phy,
598 enum phy_mode mode, int submode)
599 {
600 struct qusb2_phy *qphy = phy_get_drvdata(phy);
601
602 qphy->mode = mode;
603
604 return 0;
605 }
606
qusb2_phy_runtime_suspend(struct device * dev)607 static int __maybe_unused qusb2_phy_runtime_suspend(struct device *dev)
608 {
609 struct qusb2_phy *qphy = dev_get_drvdata(dev);
610 const struct qusb2_phy_cfg *cfg = qphy->cfg;
611 u32 intr_mask;
612
613 dev_vdbg(dev, "Suspending QUSB2 Phy, mode:%d\n", qphy->mode);
614
615 if (!qphy->phy_initialized) {
616 dev_vdbg(dev, "PHY not initialized, bailing out\n");
617 return 0;
618 }
619
620 /*
621 * Enable DP/DM interrupts to detect line state changes based on current
622 * speed. In other words, enable the triggers _opposite_ of what the
623 * current D+/D- levels are e.g. if currently D+ high, D- low
624 * (HS 'J'/Suspend), configure the mask to trigger on D+ low OR D- high
625 */
626 intr_mask = DPSE_INTR_EN | DMSE_INTR_EN;
627 switch (qphy->mode) {
628 case PHY_MODE_USB_HOST_HS:
629 case PHY_MODE_USB_HOST_FS:
630 case PHY_MODE_USB_DEVICE_HS:
631 case PHY_MODE_USB_DEVICE_FS:
632 intr_mask |= DMSE_INTR_HIGH_SEL;
633 break;
634 case PHY_MODE_USB_HOST_LS:
635 case PHY_MODE_USB_DEVICE_LS:
636 intr_mask |= DPSE_INTR_HIGH_SEL;
637 break;
638 default:
639 /* No device connected, enable both DP/DM high interrupt */
640 intr_mask |= DMSE_INTR_HIGH_SEL;
641 intr_mask |= DPSE_INTR_HIGH_SEL;
642 break;
643 }
644
645 writel(intr_mask, qphy->base + cfg->regs[QUSB2PHY_INTR_CTRL]);
646
647 /* hold core PLL into reset */
648 if (cfg->has_pll_override) {
649 qusb2_setbits(qphy->base,
650 cfg->regs[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE],
651 CORE_PLL_EN_FROM_RESET | CORE_RESET |
652 CORE_RESET_MUX);
653 }
654
655 /* enable phy auto-resume only if device is connected on bus */
656 if (qphy->mode != PHY_MODE_INVALID) {
657 qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TEST1],
658 cfg->autoresume_en);
659 /* Autoresume bit has to be toggled in order to enable it */
660 qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TEST1],
661 cfg->autoresume_en);
662 }
663
664 if (!qphy->has_se_clk_scheme)
665 clk_disable_unprepare(qphy->ref_clk);
666
667 clk_disable_unprepare(qphy->cfg_ahb_clk);
668 clk_disable_unprepare(qphy->iface_clk);
669
670 return 0;
671 }
672
qusb2_phy_runtime_resume(struct device * dev)673 static int __maybe_unused qusb2_phy_runtime_resume(struct device *dev)
674 {
675 struct qusb2_phy *qphy = dev_get_drvdata(dev);
676 const struct qusb2_phy_cfg *cfg = qphy->cfg;
677 int ret;
678
679 dev_vdbg(dev, "Resuming QUSB2 phy, mode:%d\n", qphy->mode);
680
681 if (!qphy->phy_initialized) {
682 dev_vdbg(dev, "PHY not initialized, bailing out\n");
683 return 0;
684 }
685
686 ret = clk_prepare_enable(qphy->iface_clk);
687 if (ret) {
688 dev_err(dev, "failed to enable iface_clk, %d\n", ret);
689 return ret;
690 }
691
692 ret = clk_prepare_enable(qphy->cfg_ahb_clk);
693 if (ret) {
694 dev_err(dev, "failed to enable cfg ahb clock, %d\n", ret);
695 goto disable_iface_clk;
696 }
697
698 if (!qphy->has_se_clk_scheme) {
699 ret = clk_prepare_enable(qphy->ref_clk);
700 if (ret) {
701 dev_err(dev, "failed to enable ref clk, %d\n", ret);
702 goto disable_ahb_clk;
703 }
704 }
705
706 writel(0x0, qphy->base + cfg->regs[QUSB2PHY_INTR_CTRL]);
707
708 /* bring core PLL out of reset */
709 if (cfg->has_pll_override) {
710 qusb2_clrbits(qphy->base,
711 cfg->regs[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE],
712 CORE_RESET | CORE_RESET_MUX);
713 }
714
715 return 0;
716
717 disable_ahb_clk:
718 clk_disable_unprepare(qphy->cfg_ahb_clk);
719 disable_iface_clk:
720 clk_disable_unprepare(qphy->iface_clk);
721
722 return ret;
723 }
724
qusb2_phy_init(struct phy * phy)725 static int qusb2_phy_init(struct phy *phy)
726 {
727 struct qusb2_phy *qphy = phy_get_drvdata(phy);
728 const struct qusb2_phy_cfg *cfg = qphy->cfg;
729 unsigned int val = 0;
730 unsigned int clk_scheme;
731 int ret;
732
733 dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);
734
735 /* turn on regulator supplies */
736 ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
737 if (ret)
738 return ret;
739
740 ret = clk_prepare_enable(qphy->iface_clk);
741 if (ret) {
742 dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret);
743 goto poweroff_phy;
744 }
745
746 /* enable ahb interface clock to program phy */
747 ret = clk_prepare_enable(qphy->cfg_ahb_clk);
748 if (ret) {
749 dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
750 goto disable_iface_clk;
751 }
752
753 /* Perform phy reset */
754 ret = reset_control_assert(qphy->phy_reset);
755 if (ret) {
756 dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret);
757 goto disable_ahb_clk;
758 }
759
760 /* 100 us delay to keep PHY in reset mode */
761 usleep_range(100, 150);
762
763 ret = reset_control_deassert(qphy->phy_reset);
764 if (ret) {
765 dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret);
766 goto disable_ahb_clk;
767 }
768
769 /* Disable the PHY */
770 qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN],
771 qphy->cfg->disable_ctrl);
772
773 if (cfg->has_pll_test) {
774 /* save reset value to override reference clock scheme later */
775 val = readl(qphy->base + QUSB2PHY_PLL_TEST);
776 }
777
778 qcom_qusb2_phy_configure(qphy->base, cfg->regs, cfg->tbl,
779 cfg->tbl_num);
780
781 /* Override board specific PHY tuning values */
782 qusb2_phy_override_phy_params(qphy);
783
784 /* Set efuse value for tuning the PHY */
785 qusb2_phy_set_tune2_param(qphy);
786
787 /* Enable the PHY */
788 qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN],
789 POWER_DOWN);
790
791 /* Required to get phy pll lock successfully */
792 usleep_range(150, 160);
793
794 /*
795 * Not all the SoCs have got a readable TCSR_PHY_CLK_SCHEME
796 * register in the TCSR so, if there's none, use the default
797 * value hardcoded in the configuration.
798 */
799 qphy->has_se_clk_scheme = cfg->se_clk_scheme_default;
800
801 /*
802 * read TCSR_PHY_CLK_SCHEME register to check if single-ended
803 * clock scheme is selected. If yes, then disable differential
804 * ref_clk and use single-ended clock, otherwise use differential
805 * ref_clk only.
806 */
807 if (qphy->tcsr) {
808 ret = regmap_read(qphy->tcsr, qphy->cfg->clk_scheme_offset,
809 &clk_scheme);
810 if (ret) {
811 dev_err(&phy->dev, "failed to read clk scheme reg\n");
812 goto assert_phy_reset;
813 }
814
815 /* is it a differential clock scheme ? */
816 if (!(clk_scheme & PHY_CLK_SCHEME_SEL)) {
817 dev_vdbg(&phy->dev, "%s(): select differential clk\n",
818 __func__);
819 qphy->has_se_clk_scheme = false;
820 } else {
821 dev_vdbg(&phy->dev, "%s(): select single-ended clk\n",
822 __func__);
823 }
824 }
825
826 if (!qphy->has_se_clk_scheme) {
827 ret = clk_prepare_enable(qphy->ref_clk);
828 if (ret) {
829 dev_err(&phy->dev, "failed to enable ref clk, %d\n",
830 ret);
831 goto assert_phy_reset;
832 }
833 }
834
835 if (cfg->has_pll_test) {
836 if (!qphy->has_se_clk_scheme)
837 val &= ~CLK_REF_SEL;
838 else
839 val |= CLK_REF_SEL;
840
841 writel(val, qphy->base + QUSB2PHY_PLL_TEST);
842
843 /* ensure above write is through */
844 readl(qphy->base + QUSB2PHY_PLL_TEST);
845 }
846
847 /* Required to get phy pll lock successfully */
848 usleep_range(100, 110);
849
850 val = readb(qphy->base + cfg->regs[QUSB2PHY_PLL_STATUS]);
851 if (!(val & cfg->mask_core_ready)) {
852 dev_err(&phy->dev,
853 "QUSB2PHY pll lock failed: status reg = %x\n", val);
854 ret = -EBUSY;
855 goto disable_ref_clk;
856 }
857 qphy->phy_initialized = true;
858
859 return 0;
860
861 disable_ref_clk:
862 if (!qphy->has_se_clk_scheme)
863 clk_disable_unprepare(qphy->ref_clk);
864 assert_phy_reset:
865 reset_control_assert(qphy->phy_reset);
866 disable_ahb_clk:
867 clk_disable_unprepare(qphy->cfg_ahb_clk);
868 disable_iface_clk:
869 clk_disable_unprepare(qphy->iface_clk);
870 poweroff_phy:
871 regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
872
873 return ret;
874 }
875
qusb2_phy_exit(struct phy * phy)876 static int qusb2_phy_exit(struct phy *phy)
877 {
878 struct qusb2_phy *qphy = phy_get_drvdata(phy);
879
880 /* Disable the PHY */
881 qusb2_setbits(qphy->base, qphy->cfg->regs[QUSB2PHY_PORT_POWERDOWN],
882 qphy->cfg->disable_ctrl);
883
884 if (!qphy->has_se_clk_scheme)
885 clk_disable_unprepare(qphy->ref_clk);
886
887 reset_control_assert(qphy->phy_reset);
888
889 clk_disable_unprepare(qphy->cfg_ahb_clk);
890 clk_disable_unprepare(qphy->iface_clk);
891
892 regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
893
894 qphy->phy_initialized = false;
895
896 return 0;
897 }
898
899 static const struct phy_ops qusb2_phy_gen_ops = {
900 .init = qusb2_phy_init,
901 .exit = qusb2_phy_exit,
902 .set_mode = qusb2_phy_set_mode,
903 .owner = THIS_MODULE,
904 };
905
906 static const struct of_device_id qusb2_phy_of_match_table[] = {
907 {
908 .compatible = "qcom,ipq6018-qusb2-phy",
909 .data = &ipq6018_phy_cfg,
910 }, {
911 .compatible = "qcom,ipq8074-qusb2-phy",
912 .data = &msm8996_phy_cfg,
913 }, {
914 .compatible = "qcom,ipq9574-qusb2-phy",
915 .data = &ipq6018_phy_cfg,
916 }, {
917 .compatible = "qcom,msm8953-qusb2-phy",
918 .data = &msm8996_phy_cfg,
919 }, {
920 .compatible = "qcom,msm8996-qusb2-phy",
921 .data = &msm8996_phy_cfg,
922 }, {
923 .compatible = "qcom,msm8998-qusb2-phy",
924 .data = &msm8998_phy_cfg,
925 }, {
926 .compatible = "qcom,qcm2290-qusb2-phy",
927 .data = &sm6115_phy_cfg,
928 }, {
929 .compatible = "qcom,sdm660-qusb2-phy",
930 .data = &sdm660_phy_cfg,
931 }, {
932 .compatible = "qcom,sm4250-qusb2-phy",
933 .data = &sm6115_phy_cfg,
934 }, {
935 .compatible = "qcom,sm6115-qusb2-phy",
936 .data = &sm6115_phy_cfg,
937 }, {
938 /*
939 * Deprecated. Only here to support legacy device
940 * trees that didn't include "qcom,qusb2-v2-phy"
941 */
942 .compatible = "qcom,sdm845-qusb2-phy",
943 .data = &qusb2_v2_phy_cfg,
944 }, {
945 .compatible = "qcom,qusb2-v2-phy",
946 .data = &qusb2_v2_phy_cfg,
947 },
948 { },
949 };
950 MODULE_DEVICE_TABLE(of, qusb2_phy_of_match_table);
951
952 static const struct dev_pm_ops qusb2_phy_pm_ops = {
953 SET_RUNTIME_PM_OPS(qusb2_phy_runtime_suspend,
954 qusb2_phy_runtime_resume, NULL)
955 };
956
qusb2_phy_probe(struct platform_device * pdev)957 static int qusb2_phy_probe(struct platform_device *pdev)
958 {
959 struct device *dev = &pdev->dev;
960 struct qusb2_phy *qphy;
961 struct phy_provider *phy_provider;
962 struct phy *generic_phy;
963 int ret, i;
964 int num;
965 u32 value;
966 struct override_params *or;
967
968 qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
969 if (!qphy)
970 return -ENOMEM;
971 or = &qphy->overrides;
972
973 qphy->base = devm_platform_ioremap_resource(pdev, 0);
974 if (IS_ERR(qphy->base))
975 return PTR_ERR(qphy->base);
976
977 qphy->cfg_ahb_clk = devm_clk_get(dev, "cfg_ahb");
978 if (IS_ERR(qphy->cfg_ahb_clk))
979 return dev_err_probe(dev, PTR_ERR(qphy->cfg_ahb_clk),
980 "failed to get cfg ahb clk\n");
981
982 qphy->ref_clk = devm_clk_get(dev, "ref");
983 if (IS_ERR(qphy->ref_clk))
984 return dev_err_probe(dev, PTR_ERR(qphy->ref_clk),
985 "failed to get ref clk\n");
986
987 qphy->iface_clk = devm_clk_get_optional(dev, "iface");
988 if (IS_ERR(qphy->iface_clk))
989 return PTR_ERR(qphy->iface_clk);
990
991 qphy->phy_reset = devm_reset_control_get_by_index(&pdev->dev, 0);
992 if (IS_ERR(qphy->phy_reset)) {
993 dev_err(dev, "failed to get phy core reset\n");
994 return PTR_ERR(qphy->phy_reset);
995 }
996
997 num = ARRAY_SIZE(qphy->vregs);
998 for (i = 0; i < num; i++)
999 qphy->vregs[i].supply = qusb2_phy_vreg_names[i];
1000
1001 ret = devm_regulator_bulk_get(dev, num, qphy->vregs);
1002 if (ret)
1003 return dev_err_probe(dev, ret,
1004 "failed to get regulator supplies\n");
1005
1006 /* Get the specific init parameters of QMP phy */
1007 qphy->cfg = of_device_get_match_data(dev);
1008
1009 qphy->tcsr = syscon_regmap_lookup_by_phandle(dev->of_node,
1010 "qcom,tcsr-syscon");
1011 if (IS_ERR(qphy->tcsr)) {
1012 dev_dbg(dev, "failed to lookup TCSR regmap\n");
1013 qphy->tcsr = NULL;
1014 }
1015
1016 qphy->cell = devm_nvmem_cell_get(dev, NULL);
1017 if (IS_ERR(qphy->cell)) {
1018 if (PTR_ERR(qphy->cell) == -EPROBE_DEFER)
1019 return -EPROBE_DEFER;
1020 qphy->cell = NULL;
1021 dev_dbg(dev, "failed to lookup tune2 hstx trim value\n");
1022 }
1023
1024 if (!of_property_read_u32(dev->of_node, "qcom,imp-res-offset-value",
1025 &value)) {
1026 or->imp_res_offset.value = (u8)value;
1027 or->imp_res_offset.override = true;
1028 }
1029
1030 if (!of_property_read_u32(dev->of_node, "qcom,bias-ctrl-value",
1031 &value)) {
1032 or->bias_ctrl.value = (u8)value;
1033 or->bias_ctrl.override = true;
1034 }
1035
1036 if (!of_property_read_u32(dev->of_node, "qcom,charge-ctrl-value",
1037 &value)) {
1038 or->charge_ctrl.value = (u8)value;
1039 or->charge_ctrl.override = true;
1040 }
1041
1042 if (!of_property_read_u32(dev->of_node, "qcom,hstx-trim-value",
1043 &value)) {
1044 or->hstx_trim.value = (u8)value;
1045 or->hstx_trim.override = true;
1046 }
1047
1048 if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-level",
1049 &value)) {
1050 or->preemphasis.value = (u8)value;
1051 or->preemphasis.override = true;
1052 }
1053
1054 if (!of_property_read_u32(dev->of_node, "qcom,preemphasis-width",
1055 &value)) {
1056 or->preemphasis_width.value = (u8)value;
1057 or->preemphasis_width.override = true;
1058 }
1059
1060 if (!of_property_read_u32(dev->of_node, "qcom,hsdisc-trim-value",
1061 &value)) {
1062 or->hsdisc_trim.value = (u8)value;
1063 or->hsdisc_trim.override = true;
1064 }
1065
1066 pm_runtime_set_active(dev);
1067 pm_runtime_enable(dev);
1068 /*
1069 * Prevent runtime pm from being ON by default. Users can enable
1070 * it using power/control in sysfs.
1071 */
1072 pm_runtime_forbid(dev);
1073
1074 generic_phy = devm_phy_create(dev, NULL, &qusb2_phy_gen_ops);
1075 if (IS_ERR(generic_phy)) {
1076 ret = PTR_ERR(generic_phy);
1077 dev_err(dev, "failed to create phy, %d\n", ret);
1078 pm_runtime_disable(dev);
1079 return ret;
1080 }
1081 qphy->phy = generic_phy;
1082
1083 dev_set_drvdata(dev, qphy);
1084 phy_set_drvdata(generic_phy, qphy);
1085
1086 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
1087 if (!IS_ERR(phy_provider))
1088 dev_info(dev, "Registered Qcom-QUSB2 phy\n");
1089 else
1090 pm_runtime_disable(dev);
1091
1092 return PTR_ERR_OR_ZERO(phy_provider);
1093 }
1094
1095 static struct platform_driver qusb2_phy_driver = {
1096 .probe = qusb2_phy_probe,
1097 .driver = {
1098 .name = "qcom-qusb2-phy",
1099 .pm = &qusb2_phy_pm_ops,
1100 .of_match_table = qusb2_phy_of_match_table,
1101 },
1102 };
1103
1104 module_platform_driver(qusb2_phy_driver);
1105
1106 MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
1107 MODULE_DESCRIPTION("Qualcomm QUSB2 PHY driver");
1108 MODULE_LICENSE("GPL v2");
1109