xref: /linux/drivers/input/touchscreen/fujitsu_ts.c (revision a1ff5a7d78a036d6c2178ee5acd6ba4946243800)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Fujitsu serial touchscreen driver
4  *
5  * Copyright (c) Dmitry Torokhov <dtor@mail.ru>
6  */
7 
8 
9 #include <linux/errno.h>
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/slab.h>
13 #include <linux/input.h>
14 #include <linux/serio.h>
15 
16 #define DRIVER_DESC	"Fujitsu serial touchscreen driver"
17 
18 MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
19 MODULE_DESCRIPTION(DRIVER_DESC);
20 MODULE_LICENSE("GPL");
21 
22 #define FUJITSU_LENGTH 5
23 
24 /*
25  * Per-touchscreen data.
26  */
27 struct fujitsu {
28 	struct input_dev *dev;
29 	struct serio *serio;
30 	int idx;
31 	unsigned char data[FUJITSU_LENGTH];
32 	char phys[32];
33 };
34 
35 /*
36  * Decode serial data (5 bytes per packet)
37  * First byte
38  * 1 C 0 0 R S S S
39  * Where C is 1 while in calibration mode (which we don't use)
40  * R is 1 when no coordinate corection was done.
41  * S are button state
42  */
fujitsu_interrupt(struct serio * serio,unsigned char data,unsigned int flags)43 static irqreturn_t fujitsu_interrupt(struct serio *serio,
44 				     unsigned char data, unsigned int flags)
45 {
46 	struct fujitsu *fujitsu = serio_get_drvdata(serio);
47 	struct input_dev *dev = fujitsu->dev;
48 
49 	if (fujitsu->idx == 0) {
50 		/* resync skip until start of frame */
51 		if ((data & 0xf0) != 0x80)
52 			return IRQ_HANDLED;
53 	} else {
54 		/* resync skip garbage */
55 		if (data & 0x80) {
56 			fujitsu->idx = 0;
57 			return IRQ_HANDLED;
58 		}
59 	}
60 
61 	fujitsu->data[fujitsu->idx++] = data;
62 	if (fujitsu->idx == FUJITSU_LENGTH) {
63 		input_report_abs(dev, ABS_X,
64 				 (fujitsu->data[2] << 7) | fujitsu->data[1]);
65 		input_report_abs(dev, ABS_Y,
66 				 (fujitsu->data[4] << 7) | fujitsu->data[3]);
67 		input_report_key(dev, BTN_TOUCH,
68 				 (fujitsu->data[0] & 0x03) != 2);
69 		input_sync(dev);
70 		fujitsu->idx = 0;
71 	}
72 
73 	return IRQ_HANDLED;
74 }
75 
76 /*
77  * fujitsu_disconnect() is the opposite of fujitsu_connect()
78  */
fujitsu_disconnect(struct serio * serio)79 static void fujitsu_disconnect(struct serio *serio)
80 {
81 	struct fujitsu *fujitsu = serio_get_drvdata(serio);
82 
83 	input_get_device(fujitsu->dev);
84 	input_unregister_device(fujitsu->dev);
85 	serio_close(serio);
86 	serio_set_drvdata(serio, NULL);
87 	input_put_device(fujitsu->dev);
88 	kfree(fujitsu);
89 }
90 
91 /*
92  * fujitsu_connect() is the routine that is called when someone adds a
93  * new serio device that supports the Fujitsu protocol and registers it
94  * as input device.
95  */
fujitsu_connect(struct serio * serio,struct serio_driver * drv)96 static int fujitsu_connect(struct serio *serio, struct serio_driver *drv)
97 {
98 	struct fujitsu *fujitsu;
99 	struct input_dev *input_dev;
100 	int err;
101 
102 	fujitsu = kzalloc(sizeof(*fujitsu), GFP_KERNEL);
103 	input_dev = input_allocate_device();
104 	if (!fujitsu || !input_dev) {
105 		err = -ENOMEM;
106 		goto fail1;
107 	}
108 
109 	fujitsu->serio = serio;
110 	fujitsu->dev = input_dev;
111 	snprintf(fujitsu->phys, sizeof(fujitsu->phys),
112 		 "%s/input0", serio->phys);
113 
114 	input_dev->name = "Fujitsu Serial Touchscreen";
115 	input_dev->phys = fujitsu->phys;
116 	input_dev->id.bustype = BUS_RS232;
117 	input_dev->id.vendor = SERIO_FUJITSU;
118 	input_dev->id.product = 0;
119 	input_dev->id.version = 0x0100;
120 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
121 	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
122 
123 	input_set_abs_params(input_dev, ABS_X, 0, 4096, 0, 0);
124 	input_set_abs_params(input_dev, ABS_Y, 0, 4096, 0, 0);
125 	serio_set_drvdata(serio, fujitsu);
126 
127 	err = serio_open(serio, drv);
128 	if (err)
129 		goto fail2;
130 
131 	err = input_register_device(fujitsu->dev);
132 	if (err)
133 		goto fail3;
134 
135 	return 0;
136 
137  fail3:
138 	serio_close(serio);
139  fail2:
140 	serio_set_drvdata(serio, NULL);
141  fail1:
142 	input_free_device(input_dev);
143 	kfree(fujitsu);
144 	return err;
145 }
146 
147 /*
148  * The serio driver structure.
149  */
150 static const struct serio_device_id fujitsu_serio_ids[] = {
151 	{
152 		.type	= SERIO_RS232,
153 		.proto	= SERIO_FUJITSU,
154 		.id	= SERIO_ANY,
155 		.extra	= SERIO_ANY,
156 	},
157 	{ 0 }
158 };
159 
160 MODULE_DEVICE_TABLE(serio, fujitsu_serio_ids);
161 
162 static struct serio_driver fujitsu_drv = {
163 	.driver		= {
164 		.name	= "fujitsu_ts",
165 	},
166 	.description	= DRIVER_DESC,
167 	.id_table	= fujitsu_serio_ids,
168 	.interrupt	= fujitsu_interrupt,
169 	.connect	= fujitsu_connect,
170 	.disconnect	= fujitsu_disconnect,
171 };
172 
173 module_serio_driver(fujitsu_drv);
174