xref: /linux/include/linux/mmc/mmc.h (revision 06d07429858317ded2db7986113a9e0129cd599b)
1 /*
2  * Header for MultiMediaCard (MMC)
3  *
4  * Copyright 2002 Hewlett-Packard Company
5  *
6  * Use consistent with the GNU GPL is permitted,
7  * provided that this copyright notice is
8  * preserved in its entirety in all copies and derived works.
9  *
10  * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
11  * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
12  * FITNESS FOR ANY PARTICULAR PURPOSE.
13  *
14  * Many thanks to Alessandro Rubini and Jonathan Corbet!
15  *
16  * Based strongly on code by:
17  *
18  * Author: Yong-iL Joh <tolkien@mizi.com>
19  *
20  * Author:  Andrew Christian
21  *          15 May 2002
22  */
23 
24 #ifndef LINUX_MMC_MMC_H
25 #define LINUX_MMC_MMC_H
26 
27 #include <linux/types.h>
28 
29 /* Standard MMC commands (4.1)           type  argument     response */
30    /* class 1 */
31 #define MMC_GO_IDLE_STATE         0   /* bc                          */
32 #define MMC_SEND_OP_COND          1   /* bcr  [31:0] OCR         R3  */
33 #define MMC_ALL_SEND_CID          2   /* bcr                     R2  */
34 #define MMC_SET_RELATIVE_ADDR     3   /* ac   [31:16] RCA        R1  */
35 #define MMC_SET_DSR               4   /* bc   [31:16] RCA            */
36 #define MMC_SLEEP_AWAKE		  5   /* ac   [31:16] RCA 15:flg R1b */
37 #define MMC_SWITCH                6   /* ac   [31:0] See below   R1b */
38 #define MMC_SELECT_CARD           7   /* ac   [31:16] RCA        R1  */
39 #define MMC_SEND_EXT_CSD          8   /* adtc                    R1  */
40 #define MMC_SEND_CSD              9   /* ac   [31:16] RCA        R2  */
41 #define MMC_SEND_CID             10   /* ac   [31:16] RCA        R2  */
42 #define MMC_READ_DAT_UNTIL_STOP  11   /* adtc [31:0] dadr        R1  */
43 #define MMC_STOP_TRANSMISSION    12   /* ac                      R1b */
44 #define MMC_SEND_STATUS          13   /* ac   [31:16] RCA        R1  */
45 #define MMC_BUS_TEST_R           14   /* adtc                    R1  */
46 #define MMC_GO_INACTIVE_STATE    15   /* ac   [31:16] RCA            */
47 #define MMC_BUS_TEST_W           19   /* adtc                    R1  */
48 #define MMC_SPI_READ_OCR         58   /* spi                  spi_R3 */
49 #define MMC_SPI_CRC_ON_OFF       59   /* spi  [0:0] flag      spi_R1 */
50 
51   /* class 2 */
52 #define MMC_SET_BLOCKLEN         16   /* ac   [31:0] block len   R1  */
53 #define MMC_READ_SINGLE_BLOCK    17   /* adtc [31:0] data addr   R1  */
54 #define MMC_READ_MULTIPLE_BLOCK  18   /* adtc [31:0] data addr   R1  */
55 #define MMC_SEND_TUNING_BLOCK    19   /* adtc                    R1  */
56 #define MMC_SEND_TUNING_BLOCK_HS200	21	/* adtc R1  */
57 
58   /* class 3 */
59 #define MMC_WRITE_DAT_UNTIL_STOP 20   /* adtc [31:0] data addr   R1  */
60 
61   /* class 4 */
62 #define MMC_SET_BLOCK_COUNT      23   /* adtc [31:0] data addr   R1  */
63 #define MMC_WRITE_BLOCK          24   /* adtc [31:0] data addr   R1  */
64 #define MMC_WRITE_MULTIPLE_BLOCK 25   /* adtc                    R1  */
65 #define MMC_PROGRAM_CID          26   /* adtc                    R1  */
66 #define MMC_PROGRAM_CSD          27   /* adtc                    R1  */
67 
68   /* class 6 */
69 #define MMC_SET_WRITE_PROT       28   /* ac   [31:0] data addr   R1b */
70 #define MMC_CLR_WRITE_PROT       29   /* ac   [31:0] data addr   R1b */
71 #define MMC_SEND_WRITE_PROT      30   /* adtc [31:0] wpdata addr R1  */
72 
73   /* class 5 */
74 #define MMC_ERASE_GROUP_START    35   /* ac   [31:0] data addr   R1  */
75 #define MMC_ERASE_GROUP_END      36   /* ac   [31:0] data addr   R1  */
76 #define MMC_ERASE                38   /* ac                      R1b */
77 
78   /* class 9 */
79 #define MMC_FAST_IO              39   /* ac   <Complex>          R4  */
80 #define MMC_GO_IRQ_STATE         40   /* bcr                     R5  */
81 
82   /* class 7 */
83 #define MMC_LOCK_UNLOCK          42   /* adtc                    R1b */
84 
85   /* class 8 */
86 #define MMC_APP_CMD              55   /* ac   [31:16] RCA        R1  */
87 #define MMC_GEN_CMD              56   /* adtc [0] RD/WR          R1  */
88 
89   /* class 11 */
90 #define MMC_QUE_TASK_PARAMS      44   /* ac   [20:16] task id    R1  */
91 #define MMC_QUE_TASK_ADDR        45   /* ac   [31:0] data addr   R1  */
92 #define MMC_EXECUTE_READ_TASK    46   /* adtc [20:16] task id    R1  */
93 #define MMC_EXECUTE_WRITE_TASK   47   /* adtc [20:16] task id    R1  */
94 #define MMC_CMDQ_TASK_MGMT       48   /* ac   [20:16] task id    R1b */
95 
mmc_op_multi(u32 opcode)96 static inline bool mmc_op_multi(u32 opcode)
97 {
98 	return opcode == MMC_WRITE_MULTIPLE_BLOCK ||
99 	       opcode == MMC_READ_MULTIPLE_BLOCK;
100 }
101 
mmc_op_tuning(u32 opcode)102 static inline bool mmc_op_tuning(u32 opcode)
103 {
104 	return opcode == MMC_SEND_TUNING_BLOCK ||
105 			opcode == MMC_SEND_TUNING_BLOCK_HS200;
106 }
107 
108 /*
109  * MMC_SWITCH argument format:
110  *
111  *	[31:26] Always 0
112  *	[25:24] Access Mode
113  *	[23:16] Location of target Byte in EXT_CSD
114  *	[15:08] Value Byte
115  *	[07:03] Always 0
116  *	[02:00] Command Set
117  */
118 
119 /*
120   MMC status in R1, for native mode (SPI bits are different)
121   Type
122 	e : error bit
123 	s : status bit
124 	r : detected and set for the actual command response
125 	x : detected and set during command execution. the host must poll
126             the card by sending status command in order to read these bits.
127   Clear condition
128 	a : according to the card state
129 	b : always related to the previous command. Reception of
130             a valid command will clear it (with a delay of one command)
131 	c : clear by read
132  */
133 
134 #define R1_OUT_OF_RANGE		(1 << 31)	/* er, c */
135 #define R1_ADDRESS_ERROR	(1 << 30)	/* erx, c */
136 #define R1_BLOCK_LEN_ERROR	(1 << 29)	/* er, c */
137 #define R1_ERASE_SEQ_ERROR      (1 << 28)	/* er, c */
138 #define R1_ERASE_PARAM		(1 << 27)	/* ex, c */
139 #define R1_WP_VIOLATION		(1 << 26)	/* erx, c */
140 #define R1_CARD_IS_LOCKED	(1 << 25)	/* sx, a */
141 #define R1_LOCK_UNLOCK_FAILED	(1 << 24)	/* erx, c */
142 #define R1_COM_CRC_ERROR	(1 << 23)	/* er, b */
143 #define R1_ILLEGAL_COMMAND	(1 << 22)	/* er, b */
144 #define R1_CARD_ECC_FAILED	(1 << 21)	/* ex, c */
145 #define R1_CC_ERROR		(1 << 20)	/* erx, c */
146 #define R1_ERROR		(1 << 19)	/* erx, c */
147 #define R1_UNDERRUN		(1 << 18)	/* ex, c */
148 #define R1_OVERRUN		(1 << 17)	/* ex, c */
149 #define R1_CID_CSD_OVERWRITE	(1 << 16)	/* erx, c, CID/CSD overwrite */
150 #define R1_WP_ERASE_SKIP	(1 << 15)	/* sx, c */
151 #define R1_CARD_ECC_DISABLED	(1 << 14)	/* sx, a */
152 #define R1_ERASE_RESET		(1 << 13)	/* sr, c */
153 #define R1_STATUS(x)            (x & 0xFFF9A000)
154 #define R1_CURRENT_STATE(x)	((x & 0x00001E00) >> 9)	/* sx, b (4 bits) */
155 #define R1_READY_FOR_DATA	(1 << 8)	/* sx, a */
156 #define R1_SWITCH_ERROR		(1 << 7)	/* sx, c */
157 #define R1_EXCEPTION_EVENT	(1 << 6)	/* sr, a */
158 #define R1_APP_CMD		(1 << 5)	/* sr, c */
159 
160 #define R1_STATE_IDLE	0
161 #define R1_STATE_READY	1
162 #define R1_STATE_IDENT	2
163 #define R1_STATE_STBY	3
164 #define R1_STATE_TRAN	4
165 #define R1_STATE_DATA	5
166 #define R1_STATE_RCV	6
167 #define R1_STATE_PRG	7
168 #define R1_STATE_DIS	8
169 
mmc_ready_for_data(u32 status)170 static inline bool mmc_ready_for_data(u32 status)
171 {
172 	/*
173 	 * Some cards mishandle the status bits, so make sure to check both the
174 	 * busy indication and the card state.
175 	 */
176 	return status & R1_READY_FOR_DATA &&
177 	       R1_CURRENT_STATE(status) == R1_STATE_TRAN;
178 }
179 
180 /*
181  * MMC/SD in SPI mode reports R1 status always, and R2 for SEND_STATUS
182  * R1 is the low order byte; R2 is the next highest byte, when present.
183  */
184 #define R1_SPI_IDLE		(1 << 0)
185 #define R1_SPI_ERASE_RESET	(1 << 1)
186 #define R1_SPI_ILLEGAL_COMMAND	(1 << 2)
187 #define R1_SPI_COM_CRC		(1 << 3)
188 #define R1_SPI_ERASE_SEQ	(1 << 4)
189 #define R1_SPI_ADDRESS		(1 << 5)
190 #define R1_SPI_PARAMETER	(1 << 6)
191 /* R1 bit 7 is always zero */
192 #define R2_SPI_CARD_LOCKED	(1 << 8)
193 #define R2_SPI_WP_ERASE_SKIP	(1 << 9)	/* or lock/unlock fail */
194 #define R2_SPI_LOCK_UNLOCK_FAIL	R2_SPI_WP_ERASE_SKIP
195 #define R2_SPI_ERROR		(1 << 10)
196 #define R2_SPI_CC_ERROR		(1 << 11)
197 #define R2_SPI_CARD_ECC_ERROR	(1 << 12)
198 #define R2_SPI_WP_VIOLATION	(1 << 13)
199 #define R2_SPI_ERASE_PARAM	(1 << 14)
200 #define R2_SPI_OUT_OF_RANGE	(1 << 15)	/* or CSD overwrite */
201 #define R2_SPI_CSD_OVERWRITE	R2_SPI_OUT_OF_RANGE
202 
203 /*
204  * OCR bits are mostly in host.h
205  */
206 #define MMC_CARD_BUSY	0x80000000	/* Card Power up status bit */
207 
208 /*
209  * Card Command Classes (CCC)
210  */
211 #define CCC_BASIC		(1<<0)	/* (0) Basic protocol functions */
212 					/* (CMD0,1,2,3,4,7,9,10,12,13,15) */
213 					/* (and for SPI, CMD58,59) */
214 #define CCC_STREAM_READ		(1<<1)	/* (1) Stream read commands */
215 					/* (CMD11) */
216 #define CCC_BLOCK_READ		(1<<2)	/* (2) Block read commands */
217 					/* (CMD16,17,18) */
218 #define CCC_STREAM_WRITE	(1<<3)	/* (3) Stream write commands */
219 					/* (CMD20) */
220 #define CCC_BLOCK_WRITE		(1<<4)	/* (4) Block write commands */
221 					/* (CMD16,24,25,26,27) */
222 #define CCC_ERASE		(1<<5)	/* (5) Ability to erase blocks */
223 					/* (CMD32,33,34,35,36,37,38,39) */
224 #define CCC_WRITE_PROT		(1<<6)	/* (6) Able to write protect blocks */
225 					/* (CMD28,29,30) */
226 #define CCC_LOCK_CARD		(1<<7)	/* (7) Able to lock down card */
227 					/* (CMD16,CMD42) */
228 #define CCC_APP_SPEC		(1<<8)	/* (8) Application specific */
229 					/* (CMD55,56,57,ACMD*) */
230 #define CCC_IO_MODE		(1<<9)	/* (9) I/O mode */
231 					/* (CMD5,39,40,52,53) */
232 #define CCC_SWITCH		(1<<10)	/* (10) High speed switch */
233 					/* (CMD6,34,35,36,37,50) */
234 					/* (11) Reserved */
235 					/* (CMD?) */
236 
237 /*
238  * CSD field definitions
239  */
240 
241 #define CSD_STRUCT_VER_1_0  0           /* Valid for system specification 1.0 - 1.2 */
242 #define CSD_STRUCT_VER_1_1  1           /* Valid for system specification 1.4 - 2.2 */
243 #define CSD_STRUCT_VER_1_2  2           /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */
244 #define CSD_STRUCT_EXT_CSD  3           /* Version is coded in CSD_STRUCTURE in EXT_CSD */
245 
246 #define CSD_SPEC_VER_0      0           /* Implements system specification 1.0 - 1.2 */
247 #define CSD_SPEC_VER_1      1           /* Implements system specification 1.4 */
248 #define CSD_SPEC_VER_2      2           /* Implements system specification 2.0 - 2.2 */
249 #define CSD_SPEC_VER_3      3           /* Implements system specification 3.1 - 3.2 - 3.31 */
250 #define CSD_SPEC_VER_4      4           /* Implements system specification 4.0 - 4.1 */
251 
252 /*
253  * EXT_CSD fields
254  */
255 
256 #define EXT_CSD_CMDQ_MODE_EN		15	/* R/W */
257 #define EXT_CSD_FLUSH_CACHE		32      /* W */
258 #define EXT_CSD_CACHE_CTRL		33      /* R/W */
259 #define EXT_CSD_POWER_OFF_NOTIFICATION	34	/* R/W */
260 #define EXT_CSD_EXP_EVENTS_STATUS	54	/* RO, 2 bytes */
261 #define EXT_CSD_EXP_EVENTS_CTRL		56	/* R/W, 2 bytes */
262 #define EXT_CSD_DATA_SECTOR_SIZE	61	/* R */
263 #define EXT_CSD_GP_SIZE_MULT		143	/* R/W */
264 #define EXT_CSD_PARTITION_SETTING_COMPLETED 155	/* R/W */
265 #define EXT_CSD_PARTITION_ATTRIBUTE	156	/* R/W */
266 #define EXT_CSD_PARTITION_SUPPORT	160	/* RO */
267 #define EXT_CSD_HPI_MGMT		161	/* R/W */
268 #define EXT_CSD_RST_N_FUNCTION		162	/* R/W */
269 #define EXT_CSD_BKOPS_EN		163	/* R/W */
270 #define EXT_CSD_BKOPS_START		164	/* W */
271 #define EXT_CSD_SANITIZE_START		165     /* W */
272 #define EXT_CSD_WR_REL_PARAM		166	/* RO */
273 #define EXT_CSD_RPMB_MULT		168	/* RO */
274 #define EXT_CSD_FW_CONFIG		169	/* R/W */
275 #define EXT_CSD_BOOT_WP			173	/* R/W */
276 #define EXT_CSD_ERASE_GROUP_DEF		175	/* R/W */
277 #define EXT_CSD_PART_CONFIG		179	/* R/W */
278 #define EXT_CSD_ERASED_MEM_CONT		181	/* RO */
279 #define EXT_CSD_BUS_WIDTH		183	/* R/W */
280 #define EXT_CSD_STROBE_SUPPORT		184	/* RO */
281 #define EXT_CSD_HS_TIMING		185	/* R/W */
282 #define EXT_CSD_POWER_CLASS		187	/* R/W */
283 #define EXT_CSD_REV			192	/* RO */
284 #define EXT_CSD_STRUCTURE		194	/* RO */
285 #define EXT_CSD_CARD_TYPE		196	/* RO */
286 #define EXT_CSD_DRIVER_STRENGTH		197	/* RO */
287 #define EXT_CSD_OUT_OF_INTERRUPT_TIME	198	/* RO */
288 #define EXT_CSD_PART_SWITCH_TIME        199     /* RO */
289 #define EXT_CSD_PWR_CL_52_195		200	/* RO */
290 #define EXT_CSD_PWR_CL_26_195		201	/* RO */
291 #define EXT_CSD_PWR_CL_52_360		202	/* RO */
292 #define EXT_CSD_PWR_CL_26_360		203	/* RO */
293 #define EXT_CSD_SEC_CNT			212	/* RO, 4 bytes */
294 #define EXT_CSD_S_A_TIMEOUT		217	/* RO */
295 #define EXT_CSD_REL_WR_SEC_C		222	/* RO */
296 #define EXT_CSD_HC_WP_GRP_SIZE		221	/* RO */
297 #define EXT_CSD_ERASE_TIMEOUT_MULT	223	/* RO */
298 #define EXT_CSD_HC_ERASE_GRP_SIZE	224	/* RO */
299 #define EXT_CSD_BOOT_MULT		226	/* RO */
300 #define EXT_CSD_SEC_TRIM_MULT		229	/* RO */
301 #define EXT_CSD_SEC_ERASE_MULT		230	/* RO */
302 #define EXT_CSD_SEC_FEATURE_SUPPORT	231	/* RO */
303 #define EXT_CSD_TRIM_MULT		232	/* RO */
304 #define EXT_CSD_PWR_CL_200_195		236	/* RO */
305 #define EXT_CSD_PWR_CL_200_360		237	/* RO */
306 #define EXT_CSD_PWR_CL_DDR_52_195	238	/* RO */
307 #define EXT_CSD_PWR_CL_DDR_52_360	239	/* RO */
308 #define EXT_CSD_BKOPS_STATUS		246	/* RO */
309 #define EXT_CSD_POWER_OFF_LONG_TIME	247	/* RO */
310 #define EXT_CSD_GENERIC_CMD6_TIME	248	/* RO */
311 #define EXT_CSD_CACHE_SIZE		249	/* RO, 4 bytes */
312 #define EXT_CSD_PWR_CL_DDR_200_360	253	/* RO */
313 #define EXT_CSD_FIRMWARE_VERSION	254	/* RO, 8 bytes */
314 #define EXT_CSD_PRE_EOL_INFO		267	/* RO */
315 #define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A	268	/* RO */
316 #define EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B	269	/* RO */
317 #define EXT_CSD_CMDQ_DEPTH		307	/* RO */
318 #define EXT_CSD_CMDQ_SUPPORT		308	/* RO */
319 #define EXT_CSD_SUPPORTED_MODE		493	/* RO */
320 #define EXT_CSD_TAG_UNIT_SIZE		498	/* RO */
321 #define EXT_CSD_DATA_TAG_SUPPORT	499	/* RO */
322 #define EXT_CSD_BKOPS_SUPPORT		502	/* RO */
323 #define EXT_CSD_HPI_FEATURES		503	/* RO */
324 
325 /*
326  * EXT_CSD field definitions
327  */
328 
329 #define EXT_CSD_WR_REL_PARAM_EN		(1<<2)
330 #define EXT_CSD_WR_REL_PARAM_EN_RPMB_REL_WR	(1<<4)
331 
332 #define EXT_CSD_BOOT_WP_B_PWR_WP_DIS	(0x40)
333 #define EXT_CSD_BOOT_WP_B_PERM_WP_DIS	(0x10)
334 #define EXT_CSD_BOOT_WP_B_PERM_WP_EN	(0x04)
335 #define EXT_CSD_BOOT_WP_B_PWR_WP_EN	(0x01)
336 
337 #define EXT_CSD_PART_CONFIG_ACC_MASK	(0x7)
338 #define EXT_CSD_PART_CONFIG_ACC_BOOT0	(0x1)
339 #define EXT_CSD_PART_CONFIG_ACC_RPMB	(0x3)
340 #define EXT_CSD_PART_CONFIG_ACC_GP0	(0x4)
341 
342 #define EXT_CSD_PART_SETTING_COMPLETED	(0x1)
343 #define EXT_CSD_PART_SUPPORT_PART_EN	(0x1)
344 
345 #define EXT_CSD_CMD_SET_NORMAL		(1<<0)
346 #define EXT_CSD_CMD_SET_SECURE		(1<<1)
347 #define EXT_CSD_CMD_SET_CPSECURE	(1<<2)
348 
349 #define EXT_CSD_CARD_TYPE_HS_26	(1<<0)	/* Card can run at 26MHz */
350 #define EXT_CSD_CARD_TYPE_HS_52	(1<<1)	/* Card can run at 52MHz */
351 #define EXT_CSD_CARD_TYPE_HS	(EXT_CSD_CARD_TYPE_HS_26 | \
352 				 EXT_CSD_CARD_TYPE_HS_52)
353 #define EXT_CSD_CARD_TYPE_DDR_1_8V  (1<<2)   /* Card can run at 52MHz */
354 					     /* DDR mode @1.8V or 3V I/O */
355 #define EXT_CSD_CARD_TYPE_DDR_1_2V  (1<<3)   /* Card can run at 52MHz */
356 					     /* DDR mode @1.2V I/O */
357 #define EXT_CSD_CARD_TYPE_DDR_52       (EXT_CSD_CARD_TYPE_DDR_1_8V  \
358 					| EXT_CSD_CARD_TYPE_DDR_1_2V)
359 #define EXT_CSD_CARD_TYPE_HS200_1_8V	(1<<4)	/* Card can run at 200MHz */
360 #define EXT_CSD_CARD_TYPE_HS200_1_2V	(1<<5)	/* Card can run at 200MHz */
361 						/* SDR mode @1.2V I/O */
362 #define EXT_CSD_CARD_TYPE_HS200		(EXT_CSD_CARD_TYPE_HS200_1_8V | \
363 					 EXT_CSD_CARD_TYPE_HS200_1_2V)
364 #define EXT_CSD_CARD_TYPE_HS400_1_8V	(1<<6)	/* Card can run at 200MHz DDR, 1.8V */
365 #define EXT_CSD_CARD_TYPE_HS400_1_2V	(1<<7)	/* Card can run at 200MHz DDR, 1.2V */
366 #define EXT_CSD_CARD_TYPE_HS400		(EXT_CSD_CARD_TYPE_HS400_1_8V | \
367 					 EXT_CSD_CARD_TYPE_HS400_1_2V)
368 #define EXT_CSD_CARD_TYPE_HS400ES	(1<<8)	/* Card can run at HS400ES */
369 
370 #define EXT_CSD_BUS_WIDTH_1	0	/* Card is in 1 bit mode */
371 #define EXT_CSD_BUS_WIDTH_4	1	/* Card is in 4 bit mode */
372 #define EXT_CSD_BUS_WIDTH_8	2	/* Card is in 8 bit mode */
373 #define EXT_CSD_DDR_BUS_WIDTH_4	5	/* Card is in 4 bit DDR mode */
374 #define EXT_CSD_DDR_BUS_WIDTH_8	6	/* Card is in 8 bit DDR mode */
375 #define EXT_CSD_BUS_WIDTH_STROBE BIT(7)	/* Enhanced strobe mode */
376 
377 #define EXT_CSD_TIMING_BC	0	/* Backwards compatility */
378 #define EXT_CSD_TIMING_HS	1	/* High speed */
379 #define EXT_CSD_TIMING_HS200	2	/* HS200 */
380 #define EXT_CSD_TIMING_HS400	3	/* HS400 */
381 #define EXT_CSD_DRV_STR_SHIFT	4	/* Driver Strength shift */
382 
383 #define EXT_CSD_SEC_ER_EN	BIT(0)
384 #define EXT_CSD_SEC_BD_BLK_EN	BIT(2)
385 #define EXT_CSD_SEC_GB_CL_EN	BIT(4)
386 #define EXT_CSD_SEC_SANITIZE	BIT(6)  /* v4.5 only */
387 
388 #define EXT_CSD_RST_N_EN_MASK	0x3
389 #define EXT_CSD_RST_N_ENABLED	1	/* RST_n is enabled on card */
390 
391 #define EXT_CSD_NO_POWER_NOTIFICATION	0
392 #define EXT_CSD_POWER_ON		1
393 #define EXT_CSD_POWER_OFF_SHORT		2
394 #define EXT_CSD_POWER_OFF_LONG		3
395 
396 #define EXT_CSD_PWR_CL_8BIT_MASK	0xF0	/* 8 bit PWR CLS */
397 #define EXT_CSD_PWR_CL_4BIT_MASK	0x0F	/* 8 bit PWR CLS */
398 #define EXT_CSD_PWR_CL_8BIT_SHIFT	4
399 #define EXT_CSD_PWR_CL_4BIT_SHIFT	0
400 
401 /*
402  * EXCEPTION_EVENT_STATUS field
403  */
404 #define EXT_CSD_URGENT_BKOPS		BIT(0)
405 #define EXT_CSD_DYNCAP_NEEDED		BIT(1)
406 #define EXT_CSD_SYSPOOL_EXHAUSTED	BIT(2)
407 
408 /*
409  * BKOPS status level
410  */
411 #define EXT_CSD_BKOPS_LEVEL_2		0x2
412 
413 /*
414  * BKOPS modes
415  */
416 #define EXT_CSD_MANUAL_BKOPS_MASK	0x01
417 #define EXT_CSD_AUTO_BKOPS_MASK		0x02
418 
419 /*
420  * Command Queue
421  */
422 #define EXT_CSD_CMDQ_MODE_ENABLED	BIT(0)
423 #define EXT_CSD_CMDQ_DEPTH_MASK		GENMASK(4, 0)
424 #define EXT_CSD_CMDQ_SUPPORTED		BIT(0)
425 
426 /*
427  * MMC_SWITCH access modes
428  */
429 #define MMC_SWITCH_MODE_CMD_SET		0x00	/* Change the command set */
430 #define MMC_SWITCH_MODE_SET_BITS	0x01	/* Set bits which are 1 in value */
431 #define MMC_SWITCH_MODE_CLEAR_BITS	0x02	/* Clear bits which are 1 in value */
432 #define MMC_SWITCH_MODE_WRITE_BYTE	0x03	/* Set target to value */
433 
434 /*
435  * Erase/trim/discard
436  */
437 #define MMC_ERASE_ARG			0x00000000
438 #define MMC_SECURE_ERASE_ARG		0x80000000
439 #define MMC_TRIM_ARG			0x00000001
440 #define MMC_DISCARD_ARG			0x00000003
441 #define MMC_SECURE_TRIM1_ARG		0x80000001
442 #define MMC_SECURE_TRIM2_ARG		0x80008000
443 #define MMC_SECURE_ARGS			0x80000000
444 #define MMC_TRIM_OR_DISCARD_ARGS	0x00008003
445 
446 #define mmc_driver_type_mask(n)		(1 << (n))
447 
448 #endif /* LINUX_MMC_MMC_H */
449