xref: /linux/drivers/misc/bcm-vk/bcm_vk.h (revision a1c613ae4c322ddd58d5a8539dbfba2a0380a8c0)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright 2018-2020 Broadcom.
4  */
5 
6 #ifndef BCM_VK_H
7 #define BCM_VK_H
8 
9 #include <linux/atomic.h>
10 #include <linux/firmware.h>
11 #include <linux/irq.h>
12 #include <linux/kref.h>
13 #include <linux/miscdevice.h>
14 #include <linux/mutex.h>
15 #include <linux/pci.h>
16 #include <linux/poll.h>
17 #include <linux/sched/signal.h>
18 #include <linux/tty.h>
19 #include <linux/uaccess.h>
20 #include <uapi/linux/misc/bcm_vk.h>
21 
22 #include "bcm_vk_msg.h"
23 
24 #define DRV_MODULE_NAME		"bcm-vk"
25 
26 /*
27  * Load Image is completed in two stages:
28  *
29  * 1) When the VK device boot-up, M7 CPU runs and executes the BootROM.
30  * The Secure Boot Loader (SBL) as part of the BootROM will run
31  * to open up ITCM for host to push BOOT1 image.
32  * SBL will authenticate the image before jumping to BOOT1 image.
33  *
34  * 2) Because BOOT1 image is a secured image, we also called it the
35  * Secure Boot Image (SBI). At second stage, SBI will initialize DDR
36  * and wait for host to push BOOT2 image to DDR.
37  * SBI will authenticate the image before jumping to BOOT2 image.
38  *
39  */
40 /* Location of registers of interest in BAR0 */
41 
42 /* Request register for Secure Boot Loader (SBL) download */
43 #define BAR_CODEPUSH_SBL		0x400
44 /* Start of ITCM */
45 #define CODEPUSH_BOOT1_ENTRY		0x00400000
46 #define CODEPUSH_MASK		        0xfffff000
47 #define CODEPUSH_BOOTSTART		BIT(0)
48 
49 /* Boot Status register */
50 #define BAR_BOOT_STATUS			0x404
51 
52 #define SRAM_OPEN			BIT(16)
53 #define DDR_OPEN			BIT(17)
54 
55 /* Firmware loader progress status definitions */
56 #define FW_LOADER_ACK_SEND_MORE_DATA	BIT(18)
57 #define FW_LOADER_ACK_IN_PROGRESS	BIT(19)
58 #define FW_LOADER_ACK_RCVD_ALL_DATA	BIT(20)
59 
60 /* Boot1/2 is running in standalone mode */
61 #define BOOT_STDALONE_RUNNING		BIT(21)
62 
63 /* definitions for boot status register */
64 #define BOOT_STATE_MASK			(0xffffffff & \
65 					 ~(FW_LOADER_ACK_SEND_MORE_DATA | \
66 					   FW_LOADER_ACK_IN_PROGRESS | \
67 					   BOOT_STDALONE_RUNNING))
68 
69 #define BOOT_ERR_SHIFT			4
70 #define BOOT_ERR_MASK			(0xf << BOOT_ERR_SHIFT)
71 #define BOOT_PROG_MASK			0xf
72 
73 #define BROM_STATUS_NOT_RUN		0x2
74 #define BROM_NOT_RUN			(SRAM_OPEN | BROM_STATUS_NOT_RUN)
75 #define BROM_STATUS_COMPLETE		0x6
76 #define BROM_RUNNING			(SRAM_OPEN | BROM_STATUS_COMPLETE)
77 #define BOOT1_STATUS_COMPLETE		0x6
78 #define BOOT1_RUNNING			(DDR_OPEN | BOOT1_STATUS_COMPLETE)
79 #define BOOT2_STATUS_COMPLETE		0x6
80 #define BOOT2_RUNNING			(FW_LOADER_ACK_RCVD_ALL_DATA | \
81 					 BOOT2_STATUS_COMPLETE)
82 
83 /* Boot request for Secure Boot Image (SBI) */
84 #define BAR_CODEPUSH_SBI		0x408
85 /* 64M mapped to BAR2 */
86 #define CODEPUSH_BOOT2_ENTRY		0x60000000
87 
88 #define BAR_CARD_STATUS			0x410
89 /* CARD_STATUS definitions */
90 #define CARD_STATUS_TTYVK0_READY	BIT(0)
91 #define CARD_STATUS_TTYVK1_READY	BIT(1)
92 
93 #define BAR_BOOT1_STDALONE_PROGRESS	0x420
94 #define BOOT1_STDALONE_SUCCESS		(BIT(13) | BIT(14))
95 #define BOOT1_STDALONE_PROGRESS_MASK	BOOT1_STDALONE_SUCCESS
96 
97 #define BAR_METADATA_VERSION		0x440
98 #define BAR_OS_UPTIME			0x444
99 #define BAR_CHIP_ID			0x448
100 #define MAJOR_SOC_REV(_chip_id)		(((_chip_id) >> 20) & 0xf)
101 
102 #define BAR_CARD_TEMPERATURE		0x45c
103 /* defines for all temperature sensor */
104 #define BCM_VK_TEMP_FIELD_MASK		0xff
105 #define BCM_VK_CPU_TEMP_SHIFT		0
106 #define BCM_VK_DDR0_TEMP_SHIFT		8
107 #define BCM_VK_DDR1_TEMP_SHIFT		16
108 
109 #define BAR_CARD_VOLTAGE		0x460
110 /* defines for voltage rail conversion */
111 #define BCM_VK_VOLT_RAIL_MASK		0xffff
112 #define BCM_VK_3P3_VOLT_REG_SHIFT	16
113 
114 #define BAR_CARD_ERR_LOG		0x464
115 /* Error log register bit definition - register for error alerts */
116 #define ERR_LOG_UECC			BIT(0)
117 #define ERR_LOG_SSIM_BUSY		BIT(1)
118 #define ERR_LOG_AFBC_BUSY		BIT(2)
119 #define ERR_LOG_HIGH_TEMP_ERR		BIT(3)
120 #define ERR_LOG_WDOG_TIMEOUT		BIT(4)
121 #define ERR_LOG_SYS_FAULT		BIT(5)
122 #define ERR_LOG_RAMDUMP			BIT(6)
123 #define ERR_LOG_COP_WDOG_TIMEOUT	BIT(7)
124 /* warnings */
125 #define ERR_LOG_MEM_ALLOC_FAIL		BIT(8)
126 #define ERR_LOG_LOW_TEMP_WARN		BIT(9)
127 #define ERR_LOG_ECC			BIT(10)
128 #define ERR_LOG_IPC_DWN			BIT(11)
129 
130 /* Alert bit definitions detectd on host */
131 #define ERR_LOG_HOST_INTF_V_FAIL	BIT(13)
132 #define ERR_LOG_HOST_HB_FAIL		BIT(14)
133 #define ERR_LOG_HOST_PCIE_DWN		BIT(15)
134 
135 #define BAR_CARD_ERR_MEM		0x468
136 /* defines for mem err, all fields have same width */
137 #define BCM_VK_MEM_ERR_FIELD_MASK	0xff
138 #define BCM_VK_ECC_MEM_ERR_SHIFT	0
139 #define BCM_VK_UECC_MEM_ERR_SHIFT	8
140 /* threshold of event occurrence and logs start to come out */
141 #define BCM_VK_ECC_THRESHOLD		10
142 #define BCM_VK_UECC_THRESHOLD		1
143 
144 #define BAR_CARD_PWR_AND_THRE		0x46c
145 /* defines for power and temp threshold, all fields have same width */
146 #define BCM_VK_PWR_AND_THRE_FIELD_MASK	0xff
147 #define BCM_VK_LOW_TEMP_THRE_SHIFT	0
148 #define BCM_VK_HIGH_TEMP_THRE_SHIFT	8
149 #define BCM_VK_PWR_STATE_SHIFT		16
150 
151 #define BAR_CARD_STATIC_INFO		0x470
152 
153 #define BAR_INTF_VER			0x47c
154 #define BAR_INTF_VER_MAJOR_SHIFT	16
155 #define BAR_INTF_VER_MASK		0xffff
156 /*
157  * major and minor semantic version numbers supported
158  * Please update as required on interface changes
159  */
160 #define SEMANTIC_MAJOR			1
161 #define SEMANTIC_MINOR			0
162 
163 /*
164  * first door bell reg, ie for queue = 0.  Only need the first one, as
165  * we will use the queue number to derive the others
166  */
167 #define VK_BAR0_REGSEG_DB_BASE		0x484
168 #define VK_BAR0_REGSEG_DB_REG_GAP	8 /*
169 					   * DB register gap,
170 					   * DB1 at 0x48c and DB2 at 0x494
171 					   */
172 
173 /* reset register and specific values */
174 #define VK_BAR0_RESET_DB_NUM		3
175 #define VK_BAR0_RESET_DB_SOFT		0xffffffff
176 #define VK_BAR0_RESET_DB_HARD		0xfffffffd
177 #define VK_BAR0_RESET_RAMPDUMP		0xa0000000
178 
179 #define VK_BAR0_Q_DB_BASE(q_num)	(VK_BAR0_REGSEG_DB_BASE + \
180 					 ((q_num) * VK_BAR0_REGSEG_DB_REG_GAP))
181 #define VK_BAR0_RESET_DB_BASE		(VK_BAR0_REGSEG_DB_BASE + \
182 					 (VK_BAR0_RESET_DB_NUM * VK_BAR0_REGSEG_DB_REG_GAP))
183 
184 #define BAR_BOOTSRC_SELECT		0xc78
185 /* BOOTSRC definitions */
186 #define BOOTSRC_SOFT_ENABLE		BIT(14)
187 
188 /* Card OS Firmware version size */
189 #define BAR_FIRMWARE_TAG_SIZE		50
190 #define FIRMWARE_STATUS_PRE_INIT_DONE	0x1f
191 
192 /* VK MSG_ID defines */
193 #define VK_MSG_ID_BITMAP_SIZE		4096
194 #define VK_MSG_ID_BITMAP_MASK		(VK_MSG_ID_BITMAP_SIZE - 1)
195 #define VK_MSG_ID_OVERFLOW		0xffff
196 
197 /*
198  * BAR1
199  */
200 
201 /* BAR1 message q definition */
202 
203 /* indicate if msgq ctrl in BAR1 is populated */
204 #define VK_BAR1_MSGQ_DEF_RDY		0x60c0
205 /* ready marker value for the above location, normal boot2 */
206 #define VK_BAR1_MSGQ_RDY_MARKER		0xbeefcafe
207 /* ready marker value for the above location, normal boot2 */
208 #define VK_BAR1_DIAG_RDY_MARKER		0xdeadcafe
209 /* number of msgqs in BAR1 */
210 #define VK_BAR1_MSGQ_NR			0x60c4
211 /* BAR1 queue control structure offset */
212 #define VK_BAR1_MSGQ_CTRL_OFF		0x60c8
213 
214 /* BAR1 ucode and boot1 version tag */
215 #define VK_BAR1_UCODE_VER_TAG		0x6170
216 #define VK_BAR1_BOOT1_VER_TAG		0x61b0
217 #define VK_BAR1_VER_TAG_SIZE		64
218 
219 /* Memory to hold the DMA buffer memory address allocated for boot2 download */
220 #define VK_BAR1_DMA_BUF_OFF_HI		0x61e0
221 #define VK_BAR1_DMA_BUF_OFF_LO		(VK_BAR1_DMA_BUF_OFF_HI + 4)
222 #define VK_BAR1_DMA_BUF_SZ		(VK_BAR1_DMA_BUF_OFF_HI + 8)
223 
224 /* Scratch memory allocated on host for VK */
225 #define VK_BAR1_SCRATCH_OFF_HI		0x61f0
226 #define VK_BAR1_SCRATCH_OFF_LO		(VK_BAR1_SCRATCH_OFF_HI + 4)
227 #define VK_BAR1_SCRATCH_SZ_ADDR		(VK_BAR1_SCRATCH_OFF_HI + 8)
228 #define VK_BAR1_SCRATCH_DEF_NR_PAGES	32
229 
230 /* BAR1 DAUTH info */
231 #define VK_BAR1_DAUTH_BASE_ADDR		0x6200
232 #define VK_BAR1_DAUTH_STORE_SIZE	0x48
233 #define VK_BAR1_DAUTH_VALID_SIZE	0x8
234 #define VK_BAR1_DAUTH_MAX		4
235 #define VK_BAR1_DAUTH_STORE_ADDR(x) \
236 		(VK_BAR1_DAUTH_BASE_ADDR + \
237 		 (x) * (VK_BAR1_DAUTH_STORE_SIZE + VK_BAR1_DAUTH_VALID_SIZE))
238 #define VK_BAR1_DAUTH_VALID_ADDR(x) \
239 		(VK_BAR1_DAUTH_STORE_ADDR(x) + VK_BAR1_DAUTH_STORE_SIZE)
240 
241 /* BAR1 SOTP AUTH and REVID info */
242 #define VK_BAR1_SOTP_REVID_BASE_ADDR	0x6340
243 #define VK_BAR1_SOTP_REVID_SIZE		0x10
244 #define VK_BAR1_SOTP_REVID_MAX		2
245 #define VK_BAR1_SOTP_REVID_ADDR(x) \
246 		(VK_BAR1_SOTP_REVID_BASE_ADDR + (x) * VK_BAR1_SOTP_REVID_SIZE)
247 
248 /* VK device supports a maximum of 3 bars */
249 #define MAX_BAR	3
250 
251 /* default number of msg blk for inband SGL */
252 #define BCM_VK_DEF_IB_SGL_BLK_LEN	 16
253 #define BCM_VK_IB_SGL_BLK_MAX		 24
254 
255 enum pci_barno {
256 	BAR_0 = 0,
257 	BAR_1,
258 	BAR_2
259 };
260 
261 #ifdef CONFIG_BCM_VK_TTY
262 #define BCM_VK_NUM_TTY 2
263 #else
264 #define BCM_VK_NUM_TTY 0
265 #endif
266 
267 struct bcm_vk_tty {
268 	struct tty_port port;
269 	u32 to_offset;	/* bar offset to use */
270 	u32 to_size;	/* to VK buffer size */
271 	u32 wr;		/* write offset shadow */
272 	u32 from_offset;	/* bar offset to use */
273 	u32 from_size;	/* from VK buffer size */
274 	u32 rd;		/* read offset shadow */
275 	pid_t pid;
276 	bool irq_enabled;
277 	bool is_opened;		/* tracks tty open/close */
278 };
279 
280 /* VK device max power state, supports 3, full, reduced and low */
281 #define MAX_OPP 3
282 #define MAX_CARD_INFO_TAG_SIZE 64
283 
284 struct bcm_vk_card_info {
285 	u32 version;
286 	char os_tag[MAX_CARD_INFO_TAG_SIZE];
287 	char cmpt_tag[MAX_CARD_INFO_TAG_SIZE];
288 	u32 cpu_freq_mhz;
289 	u32 cpu_scale[MAX_OPP];
290 	u32 ddr_freq_mhz;
291 	u32 ddr_size_MB;
292 	u32 video_core_freq_mhz;
293 };
294 
295 /* DAUTH related info */
296 struct bcm_vk_dauth_key {
297 	char store[VK_BAR1_DAUTH_STORE_SIZE];
298 	char valid[VK_BAR1_DAUTH_VALID_SIZE];
299 };
300 
301 struct bcm_vk_dauth_info {
302 	struct bcm_vk_dauth_key keys[VK_BAR1_DAUTH_MAX];
303 };
304 
305 /*
306  * Control structure of logging messages from the card.  This
307  * buffer is for logmsg that comes from vk
308  */
309 struct bcm_vk_peer_log {
310 	u32 rd_idx;
311 	u32 wr_idx;
312 	u32 buf_size;
313 	u32 mask;
314 	char data[];
315 };
316 
317 /* max buf size allowed */
318 #define BCM_VK_PEER_LOG_BUF_MAX SZ_16K
319 /* max size per line of peer log */
320 #define BCM_VK_PEER_LOG_LINE_MAX  256
321 
322 /*
323  * single entry for processing type + utilization
324  */
325 #define BCM_VK_PROC_TYPE_TAG_LEN 8
326 struct bcm_vk_proc_mon_entry_t {
327 	char tag[BCM_VK_PROC_TYPE_TAG_LEN];
328 	u32 used;
329 	u32 max; /**< max capacity */
330 };
331 
332 /**
333  * Structure for run time utilization
334  */
335 #define BCM_VK_PROC_MON_MAX 8 /* max entries supported */
336 struct bcm_vk_proc_mon_info {
337 	u32 num; /**< no of entries */
338 	u32 entry_size; /**< per entry size */
339 	struct bcm_vk_proc_mon_entry_t entries[BCM_VK_PROC_MON_MAX];
340 };
341 
342 struct bcm_vk_hb_ctrl {
343 	struct delayed_work work;
344 	u32 last_uptime;
345 	u32 lost_cnt;
346 };
347 
348 struct bcm_vk_alert {
349 	u16 flags;
350 	u16 notfs;
351 };
352 
353 /* some alert counters that the driver will keep track */
354 struct bcm_vk_alert_cnts {
355 	u16 ecc;
356 	u16 uecc;
357 };
358 
359 struct bcm_vk {
360 	struct pci_dev *pdev;
361 	void __iomem *bar[MAX_BAR];
362 	int num_irqs;
363 
364 	struct bcm_vk_card_info card_info;
365 	struct bcm_vk_proc_mon_info proc_mon_info;
366 	struct bcm_vk_dauth_info dauth_info;
367 
368 	/* mutex to protect the ioctls */
369 	struct mutex mutex;
370 	struct miscdevice miscdev;
371 	int devid; /* dev id allocated */
372 
373 #ifdef CONFIG_BCM_VK_TTY
374 	struct tty_driver *tty_drv;
375 	struct timer_list serial_timer;
376 	struct bcm_vk_tty tty[BCM_VK_NUM_TTY];
377 	struct workqueue_struct *tty_wq_thread;
378 	struct work_struct tty_wq_work;
379 #endif
380 
381 	/* Reference-counting to handle file operations */
382 	struct kref kref;
383 
384 	spinlock_t msg_id_lock; /* Spinlock for msg_id */
385 	u16 msg_id;
386 	DECLARE_BITMAP(bmap, VK_MSG_ID_BITMAP_SIZE);
387 	spinlock_t ctx_lock; /* Spinlock for component context */
388 	struct bcm_vk_ctx ctx[VK_CMPT_CTX_MAX];
389 	struct bcm_vk_ht_entry pid_ht[VK_PID_HT_SZ];
390 	pid_t reset_pid; /* process that issue reset */
391 
392 	atomic_t msgq_inited; /* indicate if info has been synced with vk */
393 	struct bcm_vk_msg_chan to_v_msg_chan;
394 	struct bcm_vk_msg_chan to_h_msg_chan;
395 
396 	struct workqueue_struct *wq_thread;
397 	struct work_struct wq_work; /* work queue for deferred job */
398 	unsigned long wq_offload[1]; /* various flags on wq requested */
399 	void *tdma_vaddr; /* test dma segment virtual addr */
400 	dma_addr_t tdma_addr; /* test dma segment bus addr */
401 
402 	struct notifier_block panic_nb;
403 	u32 ib_sgl_size; /* size allocated for inband sgl insertion */
404 
405 	/* heart beat mechanism control structure */
406 	struct bcm_vk_hb_ctrl hb_ctrl;
407 	/* house-keeping variable of error logs */
408 	spinlock_t host_alert_lock; /* protection to access host_alert struct */
409 	struct bcm_vk_alert host_alert;
410 	struct bcm_vk_alert peer_alert; /* bits set by the card */
411 	struct bcm_vk_alert_cnts alert_cnts;
412 
413 	/* offset of the peer log control in BAR2 */
414 	u32 peerlog_off;
415 	struct bcm_vk_peer_log peerlog_info; /* record of peer log info */
416 	/* offset of processing monitoring info in BAR2 */
417 	u32 proc_mon_off;
418 };
419 
420 /* wq offload work items bits definitions */
421 enum bcm_vk_wq_offload_flags {
422 	BCM_VK_WQ_DWNLD_PEND = 0,
423 	BCM_VK_WQ_DWNLD_AUTO = 1,
424 	BCM_VK_WQ_NOTF_PEND  = 2,
425 };
426 
427 /* a macro to get an individual field with mask and shift */
428 #define BCM_VK_EXTRACT_FIELD(_field, _reg, _mask, _shift) \
429 		(_field = (((_reg) >> (_shift)) & (_mask)))
430 
431 struct bcm_vk_entry {
432 	const u32 mask;
433 	const u32 exp_val;
434 	const char *str;
435 };
436 
437 /* alerts that could be generated from peer */
438 #define BCM_VK_PEER_ERR_NUM 12
439 extern struct bcm_vk_entry const bcm_vk_peer_err[BCM_VK_PEER_ERR_NUM];
440 /* alerts detected by the host */
441 #define BCM_VK_HOST_ERR_NUM 3
442 extern struct bcm_vk_entry const bcm_vk_host_err[BCM_VK_HOST_ERR_NUM];
443 
444 /*
445  * check if PCIe interface is down on read.  Use it when it is
446  * certain that _val should never be all ones.
447  */
448 #define BCM_VK_INTF_IS_DOWN(val) ((val) == 0xffffffff)
449 
vkread32(struct bcm_vk * vk,enum pci_barno bar,u64 offset)450 static inline u32 vkread32(struct bcm_vk *vk, enum pci_barno bar, u64 offset)
451 {
452 	return readl(vk->bar[bar] + offset);
453 }
454 
vkwrite32(struct bcm_vk * vk,u32 value,enum pci_barno bar,u64 offset)455 static inline void vkwrite32(struct bcm_vk *vk,
456 			     u32 value,
457 			     enum pci_barno bar,
458 			     u64 offset)
459 {
460 	writel(value, vk->bar[bar] + offset);
461 }
462 
vkread8(struct bcm_vk * vk,enum pci_barno bar,u64 offset)463 static inline u8 vkread8(struct bcm_vk *vk, enum pci_barno bar, u64 offset)
464 {
465 	return readb(vk->bar[bar] + offset);
466 }
467 
vkwrite8(struct bcm_vk * vk,u8 value,enum pci_barno bar,u64 offset)468 static inline void vkwrite8(struct bcm_vk *vk,
469 			    u8 value,
470 			    enum pci_barno bar,
471 			    u64 offset)
472 {
473 	writeb(value, vk->bar[bar] + offset);
474 }
475 
bcm_vk_msgq_marker_valid(struct bcm_vk * vk)476 static inline bool bcm_vk_msgq_marker_valid(struct bcm_vk *vk)
477 {
478 	u32 rdy_marker = 0;
479 	u32 fw_status;
480 
481 	fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS);
482 
483 	if ((fw_status & VK_FWSTS_READY) == VK_FWSTS_READY)
484 		rdy_marker = vkread32(vk, BAR_1, VK_BAR1_MSGQ_DEF_RDY);
485 
486 	return (rdy_marker == VK_BAR1_MSGQ_RDY_MARKER);
487 }
488 
489 int bcm_vk_open(struct inode *inode, struct file *p_file);
490 ssize_t bcm_vk_read(struct file *p_file, char __user *buf, size_t count,
491 		    loff_t *f_pos);
492 ssize_t bcm_vk_write(struct file *p_file, const char __user *buf,
493 		     size_t count, loff_t *f_pos);
494 __poll_t bcm_vk_poll(struct file *p_file, struct poll_table_struct *wait);
495 int bcm_vk_release(struct inode *inode, struct file *p_file);
496 void bcm_vk_release_data(struct kref *kref);
497 irqreturn_t bcm_vk_msgq_irqhandler(int irq, void *dev_id);
498 irqreturn_t bcm_vk_notf_irqhandler(int irq, void *dev_id);
499 irqreturn_t bcm_vk_tty_irqhandler(int irq, void *dev_id);
500 int bcm_vk_msg_init(struct bcm_vk *vk);
501 void bcm_vk_msg_remove(struct bcm_vk *vk);
502 void bcm_vk_drain_msg_on_reset(struct bcm_vk *vk);
503 int bcm_vk_sync_msgq(struct bcm_vk *vk, bool force_sync);
504 void bcm_vk_blk_drv_access(struct bcm_vk *vk);
505 s32 bcm_to_h_msg_dequeue(struct bcm_vk *vk);
506 int bcm_vk_send_shutdown_msg(struct bcm_vk *vk, u32 shut_type,
507 			     const pid_t pid, const u32 q_num);
508 void bcm_to_v_q_doorbell(struct bcm_vk *vk, u32 q_num, u32 db_val);
509 int bcm_vk_auto_load_all_images(struct bcm_vk *vk);
510 void bcm_vk_hb_init(struct bcm_vk *vk);
511 void bcm_vk_hb_deinit(struct bcm_vk *vk);
512 void bcm_vk_handle_notf(struct bcm_vk *vk);
513 bool bcm_vk_drv_access_ok(struct bcm_vk *vk);
514 void bcm_vk_set_host_alert(struct bcm_vk *vk, u32 bit_mask);
515 
516 #ifdef CONFIG_BCM_VK_TTY
517 int bcm_vk_tty_init(struct bcm_vk *vk, char *name);
518 void bcm_vk_tty_exit(struct bcm_vk *vk);
519 void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk);
520 void bcm_vk_tty_wq_exit(struct bcm_vk *vk);
521 
bcm_vk_tty_set_irq_enabled(struct bcm_vk * vk,int index)522 static inline void bcm_vk_tty_set_irq_enabled(struct bcm_vk *vk, int index)
523 {
524 	vk->tty[index].irq_enabled = true;
525 }
526 #else
bcm_vk_tty_init(struct bcm_vk * vk,char * name)527 static inline int bcm_vk_tty_init(struct bcm_vk *vk, char *name)
528 {
529 	return 0;
530 }
531 
bcm_vk_tty_exit(struct bcm_vk * vk)532 static inline void bcm_vk_tty_exit(struct bcm_vk *vk)
533 {
534 }
535 
bcm_vk_tty_terminate_tty_user(struct bcm_vk * vk)536 static inline void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk)
537 {
538 }
539 
bcm_vk_tty_wq_exit(struct bcm_vk * vk)540 static inline void bcm_vk_tty_wq_exit(struct bcm_vk *vk)
541 {
542 }
543 
bcm_vk_tty_set_irq_enabled(struct bcm_vk * vk,int index)544 static inline void bcm_vk_tty_set_irq_enabled(struct bcm_vk *vk, int index)
545 {
546 }
547 #endif /* CONFIG_BCM_VK_TTY */
548 
549 #endif
550