xref: /linux/drivers/media/dvb-frontends/drx39xyj/drxj.h (revision 762f99f4f3cb41a775b5157dd761217beba65873)
1 
2 /*
3   Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc.
4   All rights reserved.
5 
6   Redistribution and use in source and binary forms, with or without
7   modification, are permitted provided that the following conditions are met:
8 
9   * Redistributions of source code must retain the above copyright notice,
10     this list of conditions and the following disclaimer.
11   * Redistributions in binary form must reproduce the above copyright notice,
12     this list of conditions and the following disclaimer in the documentation
13 	and/or other materials provided with the distribution.
14   * Neither the name of Trident Microsystems nor Hauppauge Computer Works
15     nor the names of its contributors may be used to endorse or promote
16 	products derived from this software without specific prior written
17 	permission.
18 
19   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
20   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22   ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
23   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29   POSSIBILITY OF SUCH DAMAGE.
30 
31  DRXJ specific header file
32 
33  Authors: Dragan Savic, Milos Nikolic, Mihajlo Katona, Tao Ding, Paul Janssen
34 */
35 
36 #ifndef __DRXJ_H__
37 #define __DRXJ_H__
38 /*-------------------------------------------------------------------------
39 INCLUDES
40 -------------------------------------------------------------------------*/
41 
42 #include "drx_driver.h"
43 #include "drx_dap_fasi.h"
44 
45 /* Check DRX-J specific dap condition */
46 /* Multi master mode and short addr format only will not work.
47    RMW, CRC reset, broadcast and switching back to single master mode
48    cannot be done with short addr only in multi master mode. */
49 #if ((DRXDAP_SINGLE_MASTER == 0) && (DRXDAPFASI_LONG_ADDR_ALLOWED == 0))
50 #error "Multi master mode and short addressing only is an illegal combination"
51 	*;			/* Generate a fatal compiler error to make sure it stops here,
52 				   this is necessary because not all compilers stop after a #error. */
53 #endif
54 
55 /*-------------------------------------------------------------------------
56 TYPEDEFS
57 -------------------------------------------------------------------------*/
58 /*============================================================================*/
59 /*============================================================================*/
60 /*== code support ============================================================*/
61 /*============================================================================*/
62 /*============================================================================*/
63 
64 /*============================================================================*/
65 /*============================================================================*/
66 /*== SCU cmd if  =============================================================*/
67 /*============================================================================*/
68 /*============================================================================*/
69 
70 	struct drxjscu_cmd {
71 		u16 command;
72 			/*< Command number */
73 		u16 parameter_len;
74 			/*< Data length in byte */
75 		u16 result_len;
76 			/*< result length in byte */
77 		u16 *parameter;
78 			/*< General purpose param */
79 		u16 *result;
80 			/*< General purpose param */};
81 
82 /*============================================================================*/
83 /*============================================================================*/
84 /*== CTRL CFG related data structures ========================================*/
85 /*============================================================================*/
86 /*============================================================================*/
87 
88 /* extra intermediate lock state for VSB,QAM,NTSC */
89 #define DRXJ_DEMOD_LOCK       (DRX_LOCK_STATE_1)
90 
91 /* OOB lock states */
92 #define DRXJ_OOB_AGC_LOCK     (DRX_LOCK_STATE_1)	/* analog gain control lock */
93 #define DRXJ_OOB_SYNC_LOCK    (DRX_LOCK_STATE_2)	/* digital gain control lock */
94 
95 /* Intermediate powermodes for DRXJ */
96 #define DRXJ_POWER_DOWN_MAIN_PATH   DRX_POWER_MODE_8
97 #define DRXJ_POWER_DOWN_CORE        DRX_POWER_MODE_9
98 #define DRXJ_POWER_DOWN_PLL         DRX_POWER_MODE_10
99 
100 /* supstition for GPIO FNC mux */
101 #define APP_O                 (0x0000)
102 
103 /*#define DRX_CTRL_BASE         (0x0000)*/
104 
105 #define DRXJ_CTRL_CFG_BASE    (0x1000)
106 	enum drxj_cfg_type {
107 		DRXJ_CFG_AGC_RF = DRXJ_CTRL_CFG_BASE,
108 		DRXJ_CFG_AGC_IF,
109 		DRXJ_CFG_AGC_INTERNAL,
110 		DRXJ_CFG_PRE_SAW,
111 		DRXJ_CFG_AFE_GAIN,
112 		DRXJ_CFG_SYMBOL_CLK_OFFSET,
113 		DRXJ_CFG_ACCUM_CR_RS_CW_ERR,
114 		DRXJ_CFG_FEC_MERS_SEQ_COUNT,
115 		DRXJ_CFG_OOB_MISC,
116 		DRXJ_CFG_SMART_ANT,
117 		DRXJ_CFG_OOB_PRE_SAW,
118 		DRXJ_CFG_VSB_MISC,
119 		DRXJ_CFG_RESET_PACKET_ERR,
120 
121 		/* ATV (FM) */
122 		DRXJ_CFG_ATV_OUTPUT,	/* also for FM (SIF control) but not likely */
123 		DRXJ_CFG_ATV_MISC,
124 		DRXJ_CFG_ATV_EQU_COEF,
125 		DRXJ_CFG_ATV_AGC_STATUS,	/* also for FM ( IF,RF, audioAGC ) */
126 
127 		DRXJ_CFG_MPEG_OUTPUT_MISC,
128 		DRXJ_CFG_HW_CFG,
129 		DRXJ_CFG_OOB_LO_POW,
130 
131 		DRXJ_CFG_MAX	/* dummy, never to be used */};
132 
133 /*
134 * /enum drxj_cfg_smart_ant_io * smart antenna i/o.
135 */
136 enum drxj_cfg_smart_ant_io {
137 	DRXJ_SMT_ANT_OUTPUT = 0,
138 	DRXJ_SMT_ANT_INPUT
139 };
140 
141 /*
142 * /struct drxj_cfg_smart_ant * Set smart antenna.
143 */
144 	struct drxj_cfg_smart_ant {
145 		enum drxj_cfg_smart_ant_io io;
146 		u16 ctrl_data;
147 	};
148 
149 /*
150 * /struct DRXJAGCSTATUS_t
151 * AGC status information from the DRXJ-IQM-AF.
152 */
153 struct drxj_agc_status {
154 	u16 IFAGC;
155 	u16 RFAGC;
156 	u16 digital_agc;
157 };
158 
159 /* DRXJ_CFG_AGC_RF, DRXJ_CFG_AGC_IF */
160 
161 /*
162 * /enum drxj_agc_ctrl_mode * Available AGCs modes in the DRXJ.
163 */
164 	enum drxj_agc_ctrl_mode {
165 		DRX_AGC_CTRL_AUTO = 0,
166 		DRX_AGC_CTRL_USER,
167 		DRX_AGC_CTRL_OFF};
168 
169 /*
170 * /struct drxj_cfg_agc * Generic interface for all AGCs present on the DRXJ.
171 */
172 	struct drxj_cfg_agc {
173 		enum drx_standard standard;	/* standard for which these settings apply */
174 		enum drxj_agc_ctrl_mode ctrl_mode;	/* off, user, auto          */
175 		u16 output_level;	/* range dependent on AGC   */
176 		u16 min_output_level;	/* range dependent on AGC   */
177 		u16 max_output_level;	/* range dependent on AGC   */
178 		u16 speed;	/* range dependent on AGC   */
179 		u16 top;	/* rf-agc take over point   */
180 		u16 cut_off_current;	/* rf-agc is accelerated if output current
181 					   is below cut-off current                */};
182 
183 /* DRXJ_CFG_PRE_SAW */
184 
185 /*
186 * /struct drxj_cfg_pre_saw * Interface to configure pre SAW sense.
187 */
188 	struct drxj_cfg_pre_saw {
189 		enum drx_standard standard;	/* standard to which these settings apply */
190 		u16 reference;	/* pre SAW reference value, range 0 .. 31 */
191 		bool use_pre_saw;	/* true algorithms must use pre SAW sense */};
192 
193 /* DRXJ_CFG_AFE_GAIN */
194 
195 /*
196 * /struct drxj_cfg_afe_gain * Interface to configure gain of AFE (LNA + PGA).
197 */
198 	struct drxj_cfg_afe_gain {
199 		enum drx_standard standard;	/* standard to which these settings apply */
200 		u16 gain;	/* gain in 0.1 dB steps, DRXJ range 140 .. 335 */};
201 
202 /*
203 * /struct drxjrs_errors
204 * Available failure information in DRXJ_FEC_RS.
205 *
206 * Container for errors that are received in the most recently finished measurement period
207 *
208 */
209 	struct drxjrs_errors {
210 		u16 nr_bit_errors;
211 				/*< no of pre RS bit errors          */
212 		u16 nr_symbol_errors;
213 				/*< no of pre RS symbol errors       */
214 		u16 nr_packet_errors;
215 				/*< no of pre RS packet errors       */
216 		u16 nr_failures;
217 				/*< no of post RS failures to decode */
218 		u16 nr_snc_par_fail_count;
219 				/*< no of post RS bit erros          */
220 	};
221 
222 /*
223 * /struct drxj_cfg_vsb_misc * symbol error rate
224 */
225 	struct drxj_cfg_vsb_misc {
226 		u32 symb_error;
227 			      /*< symbol error rate sps */};
228 
229 /*
230 * /enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
231 *
232 */
233 	enum drxj_mpeg_start_width {
234 		DRXJ_MPEG_START_WIDTH_1CLKCYC,
235 		DRXJ_MPEG_START_WIDTH_8CLKCYC};
236 
237 /*
238 * /enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
239 *
240 */
241 	enum drxj_mpeg_output_clock_rate {
242 		DRXJ_MPEGOUTPUT_CLOCK_RATE_AUTO,
243 		DRXJ_MPEGOUTPUT_CLOCK_RATE_75973K,
244 		DRXJ_MPEGOUTPUT_CLOCK_RATE_50625K,
245 		DRXJ_MPEGOUTPUT_CLOCK_RATE_37968K,
246 		DRXJ_MPEGOUTPUT_CLOCK_RATE_30375K,
247 		DRXJ_MPEGOUTPUT_CLOCK_RATE_25313K,
248 		DRXJ_MPEGOUTPUT_CLOCK_RATE_21696K};
249 
250 /*
251 * /struct DRXJCfgMisc_t
252 * Change TEI bit of MPEG output
253 * reverse MPEG output bit order
254 * set MPEG output clock rate
255 */
256 	struct drxj_cfg_mpeg_output_misc {
257 		bool disable_tei_handling;	      /*< if true pass (not change) TEI bit */
258 		bool bit_reverse_mpeg_outout;	      /*< if true, parallel: msb on MD0; serial: lsb out first */
259 		enum drxj_mpeg_output_clock_rate mpeg_output_clock_rate;
260 						      /*< set MPEG output clock rate that overwirtes the derived one from symbol rate */
261 		enum drxj_mpeg_start_width mpeg_start_width;  /*< set MPEG output start width */};
262 
263 /*
264 * /enum drxj_xtal_freq * Supported external crystal reference frequency.
265 */
266 	enum drxj_xtal_freq {
267 		DRXJ_XTAL_FREQ_RSVD,
268 		DRXJ_XTAL_FREQ_27MHZ,
269 		DRXJ_XTAL_FREQ_20P25MHZ,
270 		DRXJ_XTAL_FREQ_4MHZ};
271 
272 /*
273 * /enum drxj_xtal_freq * Supported external crystal reference frequency.
274 */
275 	enum drxji2c_speed {
276 		DRXJ_I2C_SPEED_400KBPS,
277 		DRXJ_I2C_SPEED_100KBPS};
278 
279 /*
280 * /struct drxj_cfg_hw_cfg * Get hw configuration, such as crystal
281 *  reference frequency, I2C speed, etc...
282 */
283 	struct drxj_cfg_hw_cfg {
284 		enum drxj_xtal_freq xtal_freq;
285 				   /*< crystal reference frequency */
286 		enum drxji2c_speed i2c_speed;
287 				   /*< 100 or 400 kbps */};
288 
289 /*
290  *  DRXJ_CFG_ATV_MISC
291  */
292 	struct drxj_cfg_atv_misc {
293 		s16 peak_filter;	/* -8 .. 15 */
294 		u16 noise_filter;	/* 0 .. 15 */};
295 
296 /*
297  *  struct drxj_cfg_oob_misc */
298 #define   DRXJ_OOB_STATE_RESET                                        0x0
299 #define   DRXJ_OOB_STATE_AGN_HUNT                                     0x1
300 #define   DRXJ_OOB_STATE_DGN_HUNT                                     0x2
301 #define   DRXJ_OOB_STATE_AGC_HUNT                                     0x3
302 #define   DRXJ_OOB_STATE_FRQ_HUNT                                     0x4
303 #define   DRXJ_OOB_STATE_PHA_HUNT                                     0x8
304 #define   DRXJ_OOB_STATE_TIM_HUNT                                     0x10
305 #define   DRXJ_OOB_STATE_EQU_HUNT                                     0x20
306 #define   DRXJ_OOB_STATE_EQT_HUNT                                     0x30
307 #define   DRXJ_OOB_STATE_SYNC                                         0x40
308 
309 struct drxj_cfg_oob_misc {
310 	struct drxj_agc_status agc;
311 	bool eq_lock;
312 	bool sym_timing_lock;
313 	bool phase_lock;
314 	bool freq_lock;
315 	bool dig_gain_lock;
316 	bool ana_gain_lock;
317 	u8 state;
318 };
319 
320 /*
321  *  Index of in array of coef
322  */
323 	enum drxj_cfg_oob_lo_power {
324 		DRXJ_OOB_LO_POW_MINUS0DB = 0,
325 		DRXJ_OOB_LO_POW_MINUS5DB,
326 		DRXJ_OOB_LO_POW_MINUS10DB,
327 		DRXJ_OOB_LO_POW_MINUS15DB,
328 		DRXJ_OOB_LO_POW_MAX};
329 
330 /*
331  *  DRXJ_CFG_ATV_EQU_COEF
332  */
333 	struct drxj_cfg_atv_equ_coef {
334 		s16 coef0;	/* -256 .. 255 */
335 		s16 coef1;	/* -256 .. 255 */
336 		s16 coef2;	/* -256 .. 255 */
337 		s16 coef3;	/* -256 .. 255 */};
338 
339 /*
340  *  Index of in array of coef
341  */
342 	enum drxj_coef_array_index {
343 		DRXJ_COEF_IDX_MN = 0,
344 		DRXJ_COEF_IDX_FM,
345 		DRXJ_COEF_IDX_L,
346 		DRXJ_COEF_IDX_LP,
347 		DRXJ_COEF_IDX_BG,
348 		DRXJ_COEF_IDX_DK,
349 		DRXJ_COEF_IDX_I,
350 		DRXJ_COEF_IDX_MAX};
351 
352 /*
353  *  DRXJ_CFG_ATV_OUTPUT
354  */
355 
356 /*
357 * /enum DRXJAttenuation_t
358 * Attenuation setting for SIF AGC.
359 *
360 */
361 	enum drxjsif_attenuation {
362 		DRXJ_SIF_ATTENUATION_0DB,
363 		DRXJ_SIF_ATTENUATION_3DB,
364 		DRXJ_SIF_ATTENUATION_6DB,
365 		DRXJ_SIF_ATTENUATION_9DB};
366 
367 /*
368 * /struct drxj_cfg_atv_output * SIF attenuation setting.
369 *
370 */
371 struct drxj_cfg_atv_output {
372 	bool enable_cvbs_output;	/* true= enabled */
373 	bool enable_sif_output;	/* true= enabled */
374 	enum drxjsif_attenuation sif_attenuation;
375 };
376 
377 /*
378    DRXJ_CFG_ATV_AGC_STATUS (get only)
379 */
380 /* TODO : AFE interface not yet finished, subject to change */
381 	struct drxj_cfg_atv_agc_status {
382 		u16 rf_agc_gain;	/* 0 .. 877 uA */
383 		u16 if_agc_gain;	/* 0 .. 877  uA */
384 		s16 video_agc_gain;	/* -75 .. 1972 in 0.1 dB steps */
385 		s16 audio_agc_gain;	/* -4 .. 1020 in 0.1 dB steps */
386 		u16 rf_agc_loop_gain;	/* 0 .. 7 */
387 		u16 if_agc_loop_gain;	/* 0 .. 7 */
388 		u16 video_agc_loop_gain;	/* 0 .. 7 */};
389 
390 /*============================================================================*/
391 /*============================================================================*/
392 /*== CTRL related data structures ============================================*/
393 /*============================================================================*/
394 /*============================================================================*/
395 
396 /* NONE */
397 
398 /*============================================================================*/
399 /*============================================================================*/
400 
401 /*========================================*/
402 /*
403 * /struct struct drxj_data * DRXJ specific attributes.
404 *
405 * Global data container for DRXJ specific data.
406 *
407 */
408 	struct drxj_data {
409 		/* device capabilities (determined during drx_open()) */
410 		bool has_lna;		  /*< true if LNA (aka PGA) present */
411 		bool has_oob;		  /*< true if OOB supported */
412 		bool has_ntsc;		  /*< true if NTSC supported */
413 		bool has_btsc;		  /*< true if BTSC supported */
414 		bool has_smatx;	  /*< true if mat_tx is available */
415 		bool has_smarx;	  /*< true if mat_rx is available */
416 		bool has_gpio;		  /*< true if GPIO is available */
417 		bool has_irqn;		  /*< true if IRQN is available */
418 		/* A1/A2/A... */
419 		u8 mfx;		  /*< metal fix */
420 
421 		/* tuner settings */
422 		bool mirror_freq_spect_oob;/*< tuner inversion (true = tuner mirrors the signal */
423 
424 		/* standard/channel settings */
425 		enum drx_standard standard;	  /*< current standard information                     */
426 		enum drx_modulation constellation;
427 					  /*< current constellation                            */
428 		s32 frequency; /*< center signal frequency in KHz                   */
429 		enum drx_bandwidth curr_bandwidth;
430 					  /*< current channel bandwidth                        */
431 		enum drx_mirror mirror;	  /*< current channel mirror                           */
432 
433 		/* signal quality information */
434 		u32 fec_bits_desired;	  /*< BER accounting period                            */
435 		u16 fec_vd_plen;	  /*< no of trellis symbols: VD SER measurement period */
436 		u16 qam_vd_prescale;	  /*< Viterbi Measurement Prescale                     */
437 		u16 qam_vd_period;	  /*< Viterbi Measurement period                       */
438 		u16 fec_rs_plen;	  /*< defines RS BER measurement period                */
439 		u16 fec_rs_prescale;	  /*< ReedSolomon Measurement Prescale                 */
440 		u16 fec_rs_period;	  /*< ReedSolomon Measurement period                   */
441 		bool reset_pkt_err_acc;	  /*< Set a flag to reset accumulated packet error     */
442 		u16 pkt_err_acc_start;	  /*< Set a flag to reset accumulated packet error     */
443 
444 		/* HI configuration */
445 		u16 hi_cfg_timing_div;	  /*< HI Configure() parameter 2                       */
446 		u16 hi_cfg_bridge_delay;	  /*< HI Configure() parameter 3                       */
447 		u16 hi_cfg_wake_up_key;	  /*< HI Configure() parameter 4                       */
448 		u16 hi_cfg_ctrl;	  /*< HI Configure() parameter 5                       */
449 		u16 hi_cfg_transmit;	  /*< HI Configure() parameter 6                       */
450 
451 		/* UIO configuration */
452 		enum drxuio_mode uio_sma_rx_mode;/*< current mode of SmaRx pin                        */
453 		enum drxuio_mode uio_sma_tx_mode;/*< current mode of SmaTx pin                        */
454 		enum drxuio_mode uio_gpio_mode; /*< current mode of ASEL pin                         */
455 		enum drxuio_mode uio_irqn_mode; /*< current mode of IRQN pin                         */
456 
457 		/* IQM fs frequency shift and inversion */
458 		u32 iqm_fs_rate_ofs;	   /*< frequency shifter setting after setchannel      */
459 		bool pos_image;	   /*< True: positive image                            */
460 		/* IQM RC frequency shift */
461 		u32 iqm_rc_rate_ofs;	   /*< frequency shifter setting after setchannel      */
462 
463 		/* ATV configuration */
464 		u32 atv_cfg_changed_flags; /*< flag: flags cfg changes */
465 		s16 atv_top_equ0[DRXJ_COEF_IDX_MAX];	     /*< shadow of ATV_TOP_EQU0__A */
466 		s16 atv_top_equ1[DRXJ_COEF_IDX_MAX];	     /*< shadow of ATV_TOP_EQU1__A */
467 		s16 atv_top_equ2[DRXJ_COEF_IDX_MAX];	     /*< shadow of ATV_TOP_EQU2__A */
468 		s16 atv_top_equ3[DRXJ_COEF_IDX_MAX];	     /*< shadow of ATV_TOP_EQU3__A */
469 		bool phase_correction_bypass;/*< flag: true=bypass */
470 		s16 atv_top_vid_peak;	  /*< shadow of ATV_TOP_VID_PEAK__A */
471 		u16 atv_top_noise_th;	  /*< shadow of ATV_TOP_NOISE_TH__A */
472 		bool enable_cvbs_output;  /*< flag CVBS output enable */
473 		bool enable_sif_output;	  /*< flag SIF output enable */
474 		 enum drxjsif_attenuation sif_attenuation;
475 					  /*< current SIF att setting */
476 		/* Agc configuration for QAM and VSB */
477 		struct drxj_cfg_agc qam_rf_agc_cfg; /*< qam RF AGC config */
478 		struct drxj_cfg_agc qam_if_agc_cfg; /*< qam IF AGC config */
479 		struct drxj_cfg_agc vsb_rf_agc_cfg; /*< vsb RF AGC config */
480 		struct drxj_cfg_agc vsb_if_agc_cfg; /*< vsb IF AGC config */
481 
482 		/* PGA gain configuration for QAM and VSB */
483 		u16 qam_pga_cfg;	  /*< qam PGA config */
484 		u16 vsb_pga_cfg;	  /*< vsb PGA config */
485 
486 		/* Pre SAW configuration for QAM and VSB */
487 		struct drxj_cfg_pre_saw qam_pre_saw_cfg;
488 					  /*< qam pre SAW config */
489 		struct drxj_cfg_pre_saw vsb_pre_saw_cfg;
490 					  /*< qam pre SAW config */
491 
492 		/* Version information */
493 		char v_text[2][12];	  /*< allocated text versions */
494 		struct drx_version v_version[2]; /*< allocated versions structs */
495 		struct drx_version_list v_list_elements[2];
496 					  /*< allocated version list */
497 
498 		/* smart antenna configuration */
499 		bool smart_ant_inverted;
500 
501 		/* Tracking filter setting for OOB */
502 		u16 oob_trk_filter_cfg[8];
503 		bool oob_power_on;
504 
505 		/* MPEG static bitrate setting */
506 		u32 mpeg_ts_static_bitrate;  /*< bitrate static MPEG output */
507 		bool disable_te_ihandling;  /*< MPEG TS TEI handling */
508 		bool bit_reverse_mpeg_outout;/*< MPEG output bit order */
509 		 enum drxj_mpeg_output_clock_rate mpeg_output_clock_rate;
510 					    /*< MPEG output clock rate */
511 		 enum drxj_mpeg_start_width mpeg_start_width;
512 					    /*< MPEG Start width */
513 
514 		/* Pre SAW & Agc configuration for ATV */
515 		struct drxj_cfg_pre_saw atv_pre_saw_cfg;
516 					  /*< atv pre SAW config */
517 		struct drxj_cfg_agc atv_rf_agc_cfg; /*< atv RF AGC config */
518 		struct drxj_cfg_agc atv_if_agc_cfg; /*< atv IF AGC config */
519 		u16 atv_pga_cfg;	  /*< atv pga config    */
520 
521 		u32 curr_symbol_rate;
522 
523 		/* pin-safe mode */
524 		bool pdr_safe_mode;	    /*< PDR safe mode activated      */
525 		u16 pdr_safe_restore_val_gpio;
526 		u16 pdr_safe_restore_val_v_sync;
527 		u16 pdr_safe_restore_val_sma_rx;
528 		u16 pdr_safe_restore_val_sma_tx;
529 
530 		/* OOB pre-saw value */
531 		u16 oob_pre_saw;
532 		enum drxj_cfg_oob_lo_power oob_lo_pow;
533 
534 		struct drx_aud_data aud_data;
535 				    /*< audio storage                  */};
536 
537 /*-------------------------------------------------------------------------
538 Access MACROS
539 -------------------------------------------------------------------------*/
540 /*
541 * \brief Compilable references to attributes
542 * \param d pointer to demod instance
543 *
544 * Used as main reference to an attribute field.
545 * Can be used by both macro implementation and function implementation.
546 * These macros are defined to avoid duplication of code in macro and function
547 * definitions that handle access of demod common or extended attributes.
548 *
549 */
550 
551 #define DRXJ_ATTR_BTSC_DETECT(d)                       \
552 			(((struct drxj_data *)(d)->my_ext_attr)->aud_data.btsc_detect)
553 
554 /*-------------------------------------------------------------------------
555 DEFINES
556 -------------------------------------------------------------------------*/
557 
558 /*
559 * \def DRXJ_NTSC_CARRIER_FREQ_OFFSET
560 * \brief Offset from picture carrier to centre frequency in kHz, in RF domain
561 *
562 * For NTSC standard.
563 * NTSC channels are listed by their picture carrier frequency (Fpc).
564 * The function DRX_CTRL_SET_CHANNEL requires the centre frequency as input.
565 * In case the tuner module is not used the DRX-J requires that the tuner is
566 * tuned to the centre frequency of the channel:
567 *
568 * Fcentre = Fpc + DRXJ_NTSC_CARRIER_FREQ_OFFSET
569 *
570 */
571 #define DRXJ_NTSC_CARRIER_FREQ_OFFSET           ((s32)(1750))
572 
573 /*
574 * \def DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET
575 * \brief Offset from picture carrier to centre frequency in kHz, in RF domain
576 *
577 * For PAL/SECAM - BG standard. This define is needed in case the tuner module
578 * is NOT used. PAL/SECAM channels are listed by their picture carrier frequency (Fpc).
579 * The DRX-J requires that the tuner is tuned to:
580 * Fpc + DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET
581 *
582 * In case the tuner module is used the drxdriver takes care of this.
583 * In case the tuner module is NOT used the application programmer must take
584 * care of this.
585 *
586 */
587 #define DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET   ((s32)(2375))
588 
589 /*
590 * \def DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET
591 * \brief Offset from picture carrier to centre frequency in kHz, in RF domain
592 *
593 * For PAL/SECAM - DK, I, L standards. This define is needed in case the tuner module
594 * is NOT used. PAL/SECAM channels are listed by their picture carrier frequency (Fpc).
595 * The DRX-J requires that the tuner is tuned to:
596 * Fpc + DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET
597 *
598 * In case the tuner module is used the drxdriver takes care of this.
599 * In case the tuner module is NOT used the application programmer must take
600 * care of this.
601 *
602 */
603 #define DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET ((s32)(2775))
604 
605 /*
606 * \def DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET
607 * \brief Offset from picture carrier to centre frequency in kHz, in RF domain
608 *
609 * For PAL/SECAM - LP standard. This define is needed in case the tuner module
610 * is NOT used. PAL/SECAM channels are listed by their picture carrier frequency (Fpc).
611 * The DRX-J requires that the tuner is tuned to:
612 * Fpc + DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET
613 *
614 * In case the tuner module is used the drxdriver takes care of this.
615 * In case the tuner module is NOT used the application programmer must take
616 * care of this.
617 */
618 #define DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET   ((s32)(-3255))
619 
620 /*
621 * \def DRXJ_FM_CARRIER_FREQ_OFFSET
622 * \brief Offset from sound carrier to centre frequency in kHz, in RF domain
623 *
624 * For FM standard.
625 * FM channels are listed by their sound carrier frequency (Fsc).
626 * The function DRX_CTRL_SET_CHANNEL requires the Ffm frequency (see below) as
627 * input.
628 * In case the tuner module is not used the DRX-J requires that the tuner is
629 * tuned to the Ffm frequency of the channel.
630 *
631 * Ffm = Fsc + DRXJ_FM_CARRIER_FREQ_OFFSET
632 *
633 */
634 #define DRXJ_FM_CARRIER_FREQ_OFFSET             ((s32)(-3000))
635 
636 /* Revision types -------------------------------------------------------*/
637 
638 #define DRXJ_TYPE_ID (0x3946000DUL)
639 
640 /* Macros ---------------------------------------------------------------*/
641 
642 /* Convert OOB lock status to string */
643 #define DRXJ_STR_OOB_LOCKSTATUS(x) ( \
644 	(x == DRX_NEVER_LOCK) ? "Never" : \
645 	(x == DRX_NOT_LOCKED) ? "No" : \
646 	(x == DRX_LOCKED) ? "Locked" : \
647 	(x == DRX_LOCK_STATE_1) ? "AGC lock" : \
648 	(x == DRX_LOCK_STATE_2) ? "sync lock" : \
649 	"(Invalid)")
650 
651 #endif				/* __DRXJ_H__ */
652