xref: /linux/drivers/input/misc/drv2667.c (revision 9ea370f3416ecc4b22d49b24e2c7fdc9c9ba3a0e)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * DRV2667 haptics driver family
4  *
5  * Author: Dan Murphy <dmurphy@ti.com>
6  *
7  * Copyright: (C) 2014 Texas Instruments, Inc.
8  */
9 
10 #include <linux/i2c.h>
11 #include <linux/input.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
14 #include <linux/regmap.h>
15 #include <linux/slab.h>
16 #include <linux/delay.h>
17 #include <linux/regulator/consumer.h>
18 
19 /* Contol registers */
20 #define DRV2667_STATUS	0x00
21 #define DRV2667_CTRL_1	0x01
22 #define DRV2667_CTRL_2	0x02
23 /* Waveform sequencer */
24 #define DRV2667_WV_SEQ_0	0x03
25 #define DRV2667_WV_SEQ_1	0x04
26 #define DRV2667_WV_SEQ_2	0x05
27 #define DRV2667_WV_SEQ_3	0x06
28 #define DRV2667_WV_SEQ_4	0x07
29 #define DRV2667_WV_SEQ_5	0x08
30 #define DRV2667_WV_SEQ_6	0x09
31 #define DRV2667_WV_SEQ_7	0x0A
32 #define DRV2667_FIFO		0x0B
33 #define DRV2667_PAGE		0xFF
34 #define DRV2667_MAX_REG		DRV2667_PAGE
35 
36 #define DRV2667_PAGE_0		0x00
37 #define DRV2667_PAGE_1		0x01
38 #define DRV2667_PAGE_2		0x02
39 #define DRV2667_PAGE_3		0x03
40 #define DRV2667_PAGE_4		0x04
41 #define DRV2667_PAGE_5		0x05
42 #define DRV2667_PAGE_6		0x06
43 #define DRV2667_PAGE_7		0x07
44 #define DRV2667_PAGE_8		0x08
45 
46 /* RAM fields */
47 #define DRV2667_RAM_HDR_SZ	0x0
48 /* RAM Header addresses */
49 #define DRV2667_RAM_START_HI	0x01
50 #define DRV2667_RAM_START_LO	0x02
51 #define DRV2667_RAM_STOP_HI		0x03
52 #define DRV2667_RAM_STOP_LO		0x04
53 #define DRV2667_RAM_REPEAT_CT	0x05
54 /* RAM data addresses */
55 #define DRV2667_RAM_AMP		0x06
56 #define DRV2667_RAM_FREQ	0x07
57 #define DRV2667_RAM_DURATION	0x08
58 #define DRV2667_RAM_ENVELOPE	0x09
59 
60 /* Control 1 Register */
61 #define DRV2667_25_VPP_GAIN		0x00
62 #define DRV2667_50_VPP_GAIN		0x01
63 #define DRV2667_75_VPP_GAIN		0x02
64 #define DRV2667_100_VPP_GAIN	0x03
65 #define DRV2667_DIGITAL_IN		0xfc
66 #define DRV2667_ANALOG_IN		(1 << 2)
67 
68 /* Control 2 Register */
69 #define DRV2667_GO			(1 << 0)
70 #define DRV2667_STANDBY		(1 << 6)
71 #define DRV2667_DEV_RST		(1 << 7)
72 
73 /* RAM Envelope settings */
74 #define DRV2667_NO_ENV			0x00
75 #define DRV2667_32_MS_ENV		0x01
76 #define DRV2667_64_MS_ENV		0x02
77 #define DRV2667_96_MS_ENV		0x03
78 #define DRV2667_128_MS_ENV		0x04
79 #define DRV2667_160_MS_ENV		0x05
80 #define DRV2667_192_MS_ENV		0x06
81 #define DRV2667_224_MS_ENV		0x07
82 #define DRV2667_256_MS_ENV		0x08
83 #define DRV2667_512_MS_ENV		0x09
84 #define DRV2667_768_MS_ENV		0x0a
85 #define DRV2667_1024_MS_ENV		0x0b
86 #define DRV2667_1280_MS_ENV		0x0c
87 #define DRV2667_1536_MS_ENV		0x0d
88 #define DRV2667_1792_MS_ENV		0x0e
89 #define DRV2667_2048_MS_ENV		0x0f
90 
91 /**
92  * struct drv2667_data -
93  * @input_dev: Pointer to the input device
94  * @client: Pointer to the I2C client
95  * @regmap: Register map of the device
96  * @work: Work item used to off load the enable/disable of the vibration
97  * @regulator: Pointer to the regulator for the IC
98  * @page: Page number
99  * @magnitude: Magnitude of the vibration event
100  * @frequency: Frequency of the vibration event
101 **/
102 struct drv2667_data {
103 	struct input_dev *input_dev;
104 	struct i2c_client *client;
105 	struct regmap *regmap;
106 	struct work_struct work;
107 	struct regulator *regulator;
108 	u32 page;
109 	u32 magnitude;
110 	u32 frequency;
111 };
112 
113 static const struct reg_default drv2667_reg_defs[] = {
114 	{ DRV2667_STATUS, 0x02 },
115 	{ DRV2667_CTRL_1, 0x28 },
116 	{ DRV2667_CTRL_2, 0x40 },
117 	{ DRV2667_WV_SEQ_0, 0x00 },
118 	{ DRV2667_WV_SEQ_1, 0x00 },
119 	{ DRV2667_WV_SEQ_2, 0x00 },
120 	{ DRV2667_WV_SEQ_3, 0x00 },
121 	{ DRV2667_WV_SEQ_4, 0x00 },
122 	{ DRV2667_WV_SEQ_5, 0x00 },
123 	{ DRV2667_WV_SEQ_6, 0x00 },
124 	{ DRV2667_WV_SEQ_7, 0x00 },
125 	{ DRV2667_FIFO, 0x00 },
126 	{ DRV2667_PAGE, 0x00 },
127 };
128 
drv2667_set_waveform_freq(struct drv2667_data * haptics)129 static int drv2667_set_waveform_freq(struct drv2667_data *haptics)
130 {
131 	unsigned int read_buf;
132 	int freq;
133 	int error;
134 
135 	/* Per the data sheet:
136 	 * Sinusoid Frequency (Hz) = 7.8125 x Frequency
137 	 */
138 	freq = (haptics->frequency * 1000) / 78125;
139 	if (freq <= 0) {
140 		dev_err(&haptics->client->dev,
141 			"ERROR: Frequency calculated to %i\n", freq);
142 		return -EINVAL;
143 	}
144 
145 	error = regmap_read(haptics->regmap, DRV2667_PAGE, &read_buf);
146 	if (error) {
147 		dev_err(&haptics->client->dev,
148 			"Failed to read the page number: %d\n", error);
149 		return -EIO;
150 	}
151 
152 	if (read_buf == DRV2667_PAGE_0 ||
153 		haptics->page != read_buf) {
154 		error = regmap_write(haptics->regmap,
155 				DRV2667_PAGE, haptics->page);
156 		if (error) {
157 			dev_err(&haptics->client->dev,
158 				"Failed to set the page: %d\n", error);
159 			return -EIO;
160 		}
161 	}
162 
163 	error = regmap_write(haptics->regmap, DRV2667_RAM_FREQ,	freq);
164 	if (error)
165 		dev_err(&haptics->client->dev,
166 				"Failed to set the frequency: %d\n", error);
167 
168 	/* Reset back to original page */
169 	if (read_buf == DRV2667_PAGE_0 ||
170 		haptics->page != read_buf) {
171 		error = regmap_write(haptics->regmap, DRV2667_PAGE, read_buf);
172 		if (error) {
173 			dev_err(&haptics->client->dev,
174 				"Failed to set the page: %d\n", error);
175 			return -EIO;
176 		}
177 	}
178 
179 	return error;
180 }
181 
drv2667_worker(struct work_struct * work)182 static void drv2667_worker(struct work_struct *work)
183 {
184 	struct drv2667_data *haptics = container_of(work, struct drv2667_data, work);
185 	int error;
186 
187 	if (haptics->magnitude) {
188 		error = regmap_write(haptics->regmap,
189 				DRV2667_PAGE, haptics->page);
190 		if (error) {
191 			dev_err(&haptics->client->dev,
192 				"Failed to set the page: %d\n", error);
193 			return;
194 		}
195 
196 		error = regmap_write(haptics->regmap, DRV2667_RAM_AMP,
197 				haptics->magnitude);
198 		if (error) {
199 			dev_err(&haptics->client->dev,
200 				"Failed to set the amplitude: %d\n", error);
201 			return;
202 		}
203 
204 		error = regmap_write(haptics->regmap,
205 				DRV2667_PAGE, DRV2667_PAGE_0);
206 		if (error) {
207 			dev_err(&haptics->client->dev,
208 				"Failed to set the page: %d\n", error);
209 			return;
210 		}
211 
212 		error = regmap_write(haptics->regmap,
213 				DRV2667_CTRL_2, DRV2667_GO);
214 		if (error) {
215 			dev_err(&haptics->client->dev,
216 				"Failed to set the GO bit: %d\n", error);
217 		}
218 	} else {
219 		error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
220 				DRV2667_GO, 0);
221 		if (error) {
222 			dev_err(&haptics->client->dev,
223 				"Failed to unset the GO bit: %d\n", error);
224 		}
225 	}
226 }
227 
drv2667_haptics_play(struct input_dev * input,void * data,struct ff_effect * effect)228 static int drv2667_haptics_play(struct input_dev *input, void *data,
229 				struct ff_effect *effect)
230 {
231 	struct drv2667_data *haptics = input_get_drvdata(input);
232 
233 	if (effect->u.rumble.strong_magnitude > 0)
234 		haptics->magnitude = effect->u.rumble.strong_magnitude;
235 	else if (effect->u.rumble.weak_magnitude > 0)
236 		haptics->magnitude = effect->u.rumble.weak_magnitude;
237 	else
238 		haptics->magnitude = 0;
239 
240 	schedule_work(&haptics->work);
241 
242 	return 0;
243 }
244 
drv2667_close(struct input_dev * input)245 static void drv2667_close(struct input_dev *input)
246 {
247 	struct drv2667_data *haptics = input_get_drvdata(input);
248 	int error;
249 
250 	cancel_work_sync(&haptics->work);
251 
252 	error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
253 				   DRV2667_STANDBY, DRV2667_STANDBY);
254 	if (error)
255 		dev_err(&haptics->client->dev,
256 			"Failed to enter standby mode: %d\n", error);
257 }
258 
259 static const struct reg_sequence drv2667_init_regs[] = {
260 	{ DRV2667_CTRL_2, 0 },
261 	{ DRV2667_CTRL_1, DRV2667_25_VPP_GAIN },
262 	{ DRV2667_WV_SEQ_0, 1 },
263 	{ DRV2667_WV_SEQ_1, 0 }
264 };
265 
266 static const struct reg_sequence drv2667_page1_init[] = {
267 	{ DRV2667_RAM_HDR_SZ, 0x05 },
268 	{ DRV2667_RAM_START_HI, 0x80 },
269 	{ DRV2667_RAM_START_LO, 0x06 },
270 	{ DRV2667_RAM_STOP_HI, 0x00 },
271 	{ DRV2667_RAM_STOP_LO, 0x09 },
272 	{ DRV2667_RAM_REPEAT_CT, 0 },
273 	{ DRV2667_RAM_DURATION, 0x05 },
274 	{ DRV2667_RAM_ENVELOPE, DRV2667_NO_ENV },
275 	{ DRV2667_RAM_AMP, 0x60 },
276 };
277 
drv2667_init(struct drv2667_data * haptics)278 static int drv2667_init(struct drv2667_data *haptics)
279 {
280 	int error;
281 
282 	/* Set default haptic frequency to 195Hz on Page 1*/
283 	haptics->frequency = 195;
284 	haptics->page = DRV2667_PAGE_1;
285 
286 	error = regmap_register_patch(haptics->regmap,
287 				      drv2667_init_regs,
288 				      ARRAY_SIZE(drv2667_init_regs));
289 	if (error) {
290 		dev_err(&haptics->client->dev,
291 			"Failed to write init registers: %d\n",
292 			error);
293 		return error;
294 	}
295 
296 	error = regmap_write(haptics->regmap, DRV2667_PAGE, haptics->page);
297 	if (error) {
298 		dev_err(&haptics->client->dev, "Failed to set page: %d\n",
299 			error);
300 		goto error_out;
301 	}
302 
303 	error = drv2667_set_waveform_freq(haptics);
304 	if (error)
305 		goto error_page;
306 
307 	error = regmap_register_patch(haptics->regmap,
308 				      drv2667_page1_init,
309 				      ARRAY_SIZE(drv2667_page1_init));
310 	if (error) {
311 		dev_err(&haptics->client->dev,
312 			"Failed to write page registers: %d\n",
313 			error);
314 		return error;
315 	}
316 
317 	error = regmap_write(haptics->regmap, DRV2667_PAGE, DRV2667_PAGE_0);
318 	return error;
319 
320 error_page:
321 	regmap_write(haptics->regmap, DRV2667_PAGE, DRV2667_PAGE_0);
322 error_out:
323 	return error;
324 }
325 
326 static const struct regmap_config drv2667_regmap_config = {
327 	.reg_bits = 8,
328 	.val_bits = 8,
329 
330 	.max_register = DRV2667_MAX_REG,
331 	.reg_defaults = drv2667_reg_defs,
332 	.num_reg_defaults = ARRAY_SIZE(drv2667_reg_defs),
333 	.cache_type = REGCACHE_NONE,
334 };
335 
drv2667_probe(struct i2c_client * client)336 static int drv2667_probe(struct i2c_client *client)
337 {
338 	struct drv2667_data *haptics;
339 	int error;
340 
341 	haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
342 	if (!haptics)
343 		return -ENOMEM;
344 
345 	haptics->regulator = devm_regulator_get(&client->dev, "vbat");
346 	if (IS_ERR(haptics->regulator)) {
347 		error = PTR_ERR(haptics->regulator);
348 		dev_err(&client->dev,
349 			"unable to get regulator, error: %d\n", error);
350 		return error;
351 	}
352 
353 	haptics->input_dev = devm_input_allocate_device(&client->dev);
354 	if (!haptics->input_dev) {
355 		dev_err(&client->dev, "Failed to allocate input device\n");
356 		return -ENOMEM;
357 	}
358 
359 	haptics->input_dev->name = "drv2667:haptics";
360 	haptics->input_dev->dev.parent = client->dev.parent;
361 	haptics->input_dev->close = drv2667_close;
362 	input_set_drvdata(haptics->input_dev, haptics);
363 	input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
364 
365 	error = input_ff_create_memless(haptics->input_dev, NULL,
366 					drv2667_haptics_play);
367 	if (error) {
368 		dev_err(&client->dev, "input_ff_create() failed: %d\n",
369 			error);
370 		return error;
371 	}
372 
373 	INIT_WORK(&haptics->work, drv2667_worker);
374 
375 	haptics->client = client;
376 	i2c_set_clientdata(client, haptics);
377 
378 	haptics->regmap = devm_regmap_init_i2c(client, &drv2667_regmap_config);
379 	if (IS_ERR(haptics->regmap)) {
380 		error = PTR_ERR(haptics->regmap);
381 		dev_err(&client->dev, "Failed to allocate register map: %d\n",
382 			error);
383 		return error;
384 	}
385 
386 	error = drv2667_init(haptics);
387 	if (error) {
388 		dev_err(&client->dev, "Device init failed: %d\n", error);
389 		return error;
390 	}
391 
392 	error = input_register_device(haptics->input_dev);
393 	if (error) {
394 		dev_err(&client->dev, "couldn't register input device: %d\n",
395 			error);
396 		return error;
397 	}
398 
399 	return 0;
400 }
401 
drv2667_suspend(struct device * dev)402 static int drv2667_suspend(struct device *dev)
403 {
404 	struct drv2667_data *haptics = dev_get_drvdata(dev);
405 	int ret = 0;
406 
407 	mutex_lock(&haptics->input_dev->mutex);
408 
409 	if (input_device_enabled(haptics->input_dev)) {
410 		ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
411 					 DRV2667_STANDBY, DRV2667_STANDBY);
412 		if (ret) {
413 			dev_err(dev, "Failed to set standby mode\n");
414 			regulator_disable(haptics->regulator);
415 			goto out;
416 		}
417 
418 		ret = regulator_disable(haptics->regulator);
419 		if (ret) {
420 			dev_err(dev, "Failed to disable regulator\n");
421 			regmap_update_bits(haptics->regmap,
422 					   DRV2667_CTRL_2,
423 					   DRV2667_STANDBY, 0);
424 		}
425 	}
426 out:
427 	mutex_unlock(&haptics->input_dev->mutex);
428 	return ret;
429 }
430 
drv2667_resume(struct device * dev)431 static int drv2667_resume(struct device *dev)
432 {
433 	struct drv2667_data *haptics = dev_get_drvdata(dev);
434 	int ret = 0;
435 
436 	mutex_lock(&haptics->input_dev->mutex);
437 
438 	if (input_device_enabled(haptics->input_dev)) {
439 		ret = regulator_enable(haptics->regulator);
440 		if (ret) {
441 			dev_err(dev, "Failed to enable regulator\n");
442 			goto out;
443 		}
444 
445 		ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
446 					 DRV2667_STANDBY, 0);
447 		if (ret) {
448 			dev_err(dev, "Failed to unset standby mode\n");
449 			regulator_disable(haptics->regulator);
450 			goto out;
451 		}
452 
453 	}
454 
455 out:
456 	mutex_unlock(&haptics->input_dev->mutex);
457 	return ret;
458 }
459 
460 static DEFINE_SIMPLE_DEV_PM_OPS(drv2667_pm_ops, drv2667_suspend, drv2667_resume);
461 
462 static const struct i2c_device_id drv2667_id[] = {
463 	{ "drv2667" },
464 	{ }
465 };
466 MODULE_DEVICE_TABLE(i2c, drv2667_id);
467 
468 #ifdef CONFIG_OF
469 static const struct of_device_id drv2667_of_match[] = {
470 	{ .compatible = "ti,drv2667", },
471 	{ }
472 };
473 MODULE_DEVICE_TABLE(of, drv2667_of_match);
474 #endif
475 
476 static struct i2c_driver drv2667_driver = {
477 	.probe		= drv2667_probe,
478 	.driver		= {
479 		.name	= "drv2667-haptics",
480 		.of_match_table = of_match_ptr(drv2667_of_match),
481 		.pm	= pm_sleep_ptr(&drv2667_pm_ops),
482 	},
483 	.id_table = drv2667_id,
484 };
485 module_i2c_driver(drv2667_driver);
486 
487 MODULE_DESCRIPTION("TI DRV2667 haptics driver");
488 MODULE_LICENSE("GPL");
489 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
490