xref: /linux/include/uapi/drm/drm_mode.h (revision de848da12f752170c2ebe114804a985314fd5a6a)
1 /*
2  * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
3  * Copyright (c) 2007 Jakob Bornecrantz <wallbraker@gmail.com>
4  * Copyright (c) 2008 Red Hat Inc.
5  * Copyright (c) 2007-2008 Tungsten Graphics, Inc., Cedar Park, TX., USA
6  * Copyright (c) 2007-2008 Intel Corporation
7  *
8  * Permission is hereby granted, free of charge, to any person obtaining a
9  * copy of this software and associated documentation files (the "Software"),
10  * to deal in the Software without restriction, including without limitation
11  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
12  * and/or sell copies of the Software, and to permit persons to whom the
13  * Software is furnished to do so, subject to the following conditions:
14  *
15  * The above copyright notice and this permission notice shall be included in
16  * all copies or substantial portions of the Software.
17  *
18  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21  * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
23  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
24  * IN THE SOFTWARE.
25  */
26 
27 #ifndef _DRM_MODE_H
28 #define _DRM_MODE_H
29 
30 #include "drm.h"
31 
32 #if defined(__cplusplus)
33 extern "C" {
34 #endif
35 
36 /**
37  * DOC: overview
38  *
39  * DRM exposes many UAPI and structure definitions to have a consistent
40  * and standardized interface with users.
41  * Userspace can refer to these structure definitions and UAPI formats
42  * to communicate to drivers.
43  */
44 
45 #define DRM_CONNECTOR_NAME_LEN	32
46 #define DRM_DISPLAY_MODE_LEN	32
47 #define DRM_PROP_NAME_LEN	32
48 
49 #define DRM_MODE_TYPE_BUILTIN	(1<<0) /* deprecated */
50 #define DRM_MODE_TYPE_CLOCK_C	((1<<1) | DRM_MODE_TYPE_BUILTIN) /* deprecated */
51 #define DRM_MODE_TYPE_CRTC_C	((1<<2) | DRM_MODE_TYPE_BUILTIN) /* deprecated */
52 #define DRM_MODE_TYPE_PREFERRED	(1<<3)
53 #define DRM_MODE_TYPE_DEFAULT	(1<<4) /* deprecated */
54 #define DRM_MODE_TYPE_USERDEF	(1<<5)
55 #define DRM_MODE_TYPE_DRIVER	(1<<6)
56 
57 #define DRM_MODE_TYPE_ALL	(DRM_MODE_TYPE_PREFERRED |	\
58 				 DRM_MODE_TYPE_USERDEF |	\
59 				 DRM_MODE_TYPE_DRIVER)
60 
61 /* Video mode flags */
62 /* bit compatible with the xrandr RR_ definitions (bits 0-13)
63  *
64  * ABI warning: Existing userspace really expects
65  * the mode flags to match the xrandr definitions. Any
66  * changes that don't match the xrandr definitions will
67  * likely need a new client cap or some other mechanism
68  * to avoid breaking existing userspace. This includes
69  * allocating new flags in the previously unused bits!
70  */
71 #define DRM_MODE_FLAG_PHSYNC			(1<<0)
72 #define DRM_MODE_FLAG_NHSYNC			(1<<1)
73 #define DRM_MODE_FLAG_PVSYNC			(1<<2)
74 #define DRM_MODE_FLAG_NVSYNC			(1<<3)
75 #define DRM_MODE_FLAG_INTERLACE			(1<<4)
76 #define DRM_MODE_FLAG_DBLSCAN			(1<<5)
77 #define DRM_MODE_FLAG_CSYNC			(1<<6)
78 #define DRM_MODE_FLAG_PCSYNC			(1<<7)
79 #define DRM_MODE_FLAG_NCSYNC			(1<<8)
80 #define DRM_MODE_FLAG_HSKEW			(1<<9) /* hskew provided */
81 #define DRM_MODE_FLAG_BCAST			(1<<10) /* deprecated */
82 #define DRM_MODE_FLAG_PIXMUX			(1<<11) /* deprecated */
83 #define DRM_MODE_FLAG_DBLCLK			(1<<12)
84 #define DRM_MODE_FLAG_CLKDIV2			(1<<13)
85  /*
86   * When adding a new stereo mode don't forget to adjust DRM_MODE_FLAGS_3D_MAX
87   * (define not exposed to user space).
88   */
89 #define DRM_MODE_FLAG_3D_MASK			(0x1f<<14)
90 #define  DRM_MODE_FLAG_3D_NONE		(0<<14)
91 #define  DRM_MODE_FLAG_3D_FRAME_PACKING		(1<<14)
92 #define  DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE	(2<<14)
93 #define  DRM_MODE_FLAG_3D_LINE_ALTERNATIVE	(3<<14)
94 #define  DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL	(4<<14)
95 #define  DRM_MODE_FLAG_3D_L_DEPTH		(5<<14)
96 #define  DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH	(6<<14)
97 #define  DRM_MODE_FLAG_3D_TOP_AND_BOTTOM	(7<<14)
98 #define  DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF	(8<<14)
99 
100 /* Picture aspect ratio options */
101 #define DRM_MODE_PICTURE_ASPECT_NONE		0
102 #define DRM_MODE_PICTURE_ASPECT_4_3		1
103 #define DRM_MODE_PICTURE_ASPECT_16_9		2
104 #define DRM_MODE_PICTURE_ASPECT_64_27		3
105 #define DRM_MODE_PICTURE_ASPECT_256_135		4
106 
107 /* Content type options */
108 #define DRM_MODE_CONTENT_TYPE_NO_DATA		0
109 #define DRM_MODE_CONTENT_TYPE_GRAPHICS		1
110 #define DRM_MODE_CONTENT_TYPE_PHOTO		2
111 #define DRM_MODE_CONTENT_TYPE_CINEMA		3
112 #define DRM_MODE_CONTENT_TYPE_GAME		4
113 
114 /* Aspect ratio flag bitmask (4 bits 22:19) */
115 #define DRM_MODE_FLAG_PIC_AR_MASK		(0x0F<<19)
116 #define  DRM_MODE_FLAG_PIC_AR_NONE \
117 			(DRM_MODE_PICTURE_ASPECT_NONE<<19)
118 #define  DRM_MODE_FLAG_PIC_AR_4_3 \
119 			(DRM_MODE_PICTURE_ASPECT_4_3<<19)
120 #define  DRM_MODE_FLAG_PIC_AR_16_9 \
121 			(DRM_MODE_PICTURE_ASPECT_16_9<<19)
122 #define  DRM_MODE_FLAG_PIC_AR_64_27 \
123 			(DRM_MODE_PICTURE_ASPECT_64_27<<19)
124 #define  DRM_MODE_FLAG_PIC_AR_256_135 \
125 			(DRM_MODE_PICTURE_ASPECT_256_135<<19)
126 
127 #define  DRM_MODE_FLAG_ALL	(DRM_MODE_FLAG_PHSYNC |		\
128 				 DRM_MODE_FLAG_NHSYNC |		\
129 				 DRM_MODE_FLAG_PVSYNC |		\
130 				 DRM_MODE_FLAG_NVSYNC |		\
131 				 DRM_MODE_FLAG_INTERLACE |	\
132 				 DRM_MODE_FLAG_DBLSCAN |	\
133 				 DRM_MODE_FLAG_CSYNC |		\
134 				 DRM_MODE_FLAG_PCSYNC |		\
135 				 DRM_MODE_FLAG_NCSYNC |		\
136 				 DRM_MODE_FLAG_HSKEW |		\
137 				 DRM_MODE_FLAG_DBLCLK |		\
138 				 DRM_MODE_FLAG_CLKDIV2 |	\
139 				 DRM_MODE_FLAG_3D_MASK)
140 
141 /* DPMS flags */
142 /* bit compatible with the xorg definitions. */
143 #define DRM_MODE_DPMS_ON	0
144 #define DRM_MODE_DPMS_STANDBY	1
145 #define DRM_MODE_DPMS_SUSPEND	2
146 #define DRM_MODE_DPMS_OFF	3
147 
148 /* Scaling mode options */
149 #define DRM_MODE_SCALE_NONE		0 /* Unmodified timing (display or
150 					     software can still scale) */
151 #define DRM_MODE_SCALE_FULLSCREEN	1 /* Full screen, ignore aspect */
152 #define DRM_MODE_SCALE_CENTER		2 /* Centered, no scaling */
153 #define DRM_MODE_SCALE_ASPECT		3 /* Full screen, preserve aspect */
154 
155 /* Dithering mode options */
156 #define DRM_MODE_DITHERING_OFF	0
157 #define DRM_MODE_DITHERING_ON	1
158 #define DRM_MODE_DITHERING_AUTO 2
159 
160 /* Dirty info options */
161 #define DRM_MODE_DIRTY_OFF      0
162 #define DRM_MODE_DIRTY_ON       1
163 #define DRM_MODE_DIRTY_ANNOTATE 2
164 
165 /* Link Status options */
166 #define DRM_MODE_LINK_STATUS_GOOD	0
167 #define DRM_MODE_LINK_STATUS_BAD	1
168 
169 /*
170  * DRM_MODE_ROTATE_<degrees>
171  *
172  * Signals that a drm plane is been rotated <degrees> degrees in counter
173  * clockwise direction.
174  *
175  * This define is provided as a convenience, looking up the property id
176  * using the name->prop id lookup is the preferred method.
177  */
178 #define DRM_MODE_ROTATE_0       (1<<0)
179 #define DRM_MODE_ROTATE_90      (1<<1)
180 #define DRM_MODE_ROTATE_180     (1<<2)
181 #define DRM_MODE_ROTATE_270     (1<<3)
182 
183 /*
184  * DRM_MODE_ROTATE_MASK
185  *
186  * Bitmask used to look for drm plane rotations.
187  */
188 #define DRM_MODE_ROTATE_MASK (\
189 		DRM_MODE_ROTATE_0  | \
190 		DRM_MODE_ROTATE_90  | \
191 		DRM_MODE_ROTATE_180 | \
192 		DRM_MODE_ROTATE_270)
193 
194 /*
195  * DRM_MODE_REFLECT_<axis>
196  *
197  * Signals that the contents of a drm plane is reflected along the <axis> axis,
198  * in the same way as mirroring.
199  * See kerneldoc chapter "Plane Composition Properties" for more details.
200  *
201  * This define is provided as a convenience, looking up the property id
202  * using the name->prop id lookup is the preferred method.
203  */
204 #define DRM_MODE_REFLECT_X      (1<<4)
205 #define DRM_MODE_REFLECT_Y      (1<<5)
206 
207 /*
208  * DRM_MODE_REFLECT_MASK
209  *
210  * Bitmask used to look for drm plane reflections.
211  */
212 #define DRM_MODE_REFLECT_MASK (\
213 		DRM_MODE_REFLECT_X | \
214 		DRM_MODE_REFLECT_Y)
215 
216 /* Content Protection Flags */
217 #define DRM_MODE_CONTENT_PROTECTION_UNDESIRED	0
218 #define DRM_MODE_CONTENT_PROTECTION_DESIRED     1
219 #define DRM_MODE_CONTENT_PROTECTION_ENABLED     2
220 
221 /**
222  * struct drm_mode_modeinfo - Display mode information.
223  * @clock: pixel clock in kHz
224  * @hdisplay: horizontal display size
225  * @hsync_start: horizontal sync start
226  * @hsync_end: horizontal sync end
227  * @htotal: horizontal total size
228  * @hskew: horizontal skew
229  * @vdisplay: vertical display size
230  * @vsync_start: vertical sync start
231  * @vsync_end: vertical sync end
232  * @vtotal: vertical total size
233  * @vscan: vertical scan
234  * @vrefresh: approximate vertical refresh rate in Hz
235  * @flags: bitmask of misc. flags, see DRM_MODE_FLAG_* defines
236  * @type: bitmask of type flags, see DRM_MODE_TYPE_* defines
237  * @name: string describing the mode resolution
238  *
239  * This is the user-space API display mode information structure. For the
240  * kernel version see struct drm_display_mode.
241  */
242 struct drm_mode_modeinfo {
243 	__u32 clock;
244 	__u16 hdisplay;
245 	__u16 hsync_start;
246 	__u16 hsync_end;
247 	__u16 htotal;
248 	__u16 hskew;
249 	__u16 vdisplay;
250 	__u16 vsync_start;
251 	__u16 vsync_end;
252 	__u16 vtotal;
253 	__u16 vscan;
254 
255 	__u32 vrefresh;
256 
257 	__u32 flags;
258 	__u32 type;
259 	char name[DRM_DISPLAY_MODE_LEN];
260 };
261 
262 struct drm_mode_card_res {
263 	__u64 fb_id_ptr;
264 	__u64 crtc_id_ptr;
265 	__u64 connector_id_ptr;
266 	__u64 encoder_id_ptr;
267 	__u32 count_fbs;
268 	__u32 count_crtcs;
269 	__u32 count_connectors;
270 	__u32 count_encoders;
271 	__u32 min_width;
272 	__u32 max_width;
273 	__u32 min_height;
274 	__u32 max_height;
275 };
276 
277 struct drm_mode_crtc {
278 	__u64 set_connectors_ptr;
279 	__u32 count_connectors;
280 
281 	__u32 crtc_id; /**< Id */
282 	__u32 fb_id; /**< Id of framebuffer */
283 
284 	__u32 x; /**< x Position on the framebuffer */
285 	__u32 y; /**< y Position on the framebuffer */
286 
287 	__u32 gamma_size;
288 	__u32 mode_valid;
289 	struct drm_mode_modeinfo mode;
290 };
291 
292 #define DRM_MODE_PRESENT_TOP_FIELD	(1<<0)
293 #define DRM_MODE_PRESENT_BOTTOM_FIELD	(1<<1)
294 
295 /* Planes blend with or override other bits on the CRTC */
296 struct drm_mode_set_plane {
297 	__u32 plane_id;
298 	__u32 crtc_id;
299 	__u32 fb_id; /* fb object contains surface format type */
300 	__u32 flags; /* see above flags */
301 
302 	/* Signed dest location allows it to be partially off screen */
303 	__s32 crtc_x;
304 	__s32 crtc_y;
305 	__u32 crtc_w;
306 	__u32 crtc_h;
307 
308 	/* Source values are 16.16 fixed point */
309 	__u32 src_x;
310 	__u32 src_y;
311 	__u32 src_h;
312 	__u32 src_w;
313 };
314 
315 /**
316  * struct drm_mode_get_plane - Get plane metadata.
317  *
318  * Userspace can perform a GETPLANE ioctl to retrieve information about a
319  * plane.
320  *
321  * To retrieve the number of formats supported, set @count_format_types to zero
322  * and call the ioctl. @count_format_types will be updated with the value.
323  *
324  * To retrieve these formats, allocate an array with the memory needed to store
325  * @count_format_types formats. Point @format_type_ptr to this array and call
326  * the ioctl again (with @count_format_types still set to the value returned in
327  * the first ioctl call).
328  */
329 struct drm_mode_get_plane {
330 	/**
331 	 * @plane_id: Object ID of the plane whose information should be
332 	 * retrieved. Set by caller.
333 	 */
334 	__u32 plane_id;
335 
336 	/** @crtc_id: Object ID of the current CRTC. */
337 	__u32 crtc_id;
338 	/** @fb_id: Object ID of the current fb. */
339 	__u32 fb_id;
340 
341 	/**
342 	 * @possible_crtcs: Bitmask of CRTC's compatible with the plane. CRTC's
343 	 * are created and they receive an index, which corresponds to their
344 	 * position in the bitmask. Bit N corresponds to
345 	 * :ref:`CRTC index<crtc_index>` N.
346 	 */
347 	__u32 possible_crtcs;
348 	/** @gamma_size: Never used. */
349 	__u32 gamma_size;
350 
351 	/** @count_format_types: Number of formats. */
352 	__u32 count_format_types;
353 	/**
354 	 * @format_type_ptr: Pointer to ``__u32`` array of formats that are
355 	 * supported by the plane. These formats do not require modifiers.
356 	 */
357 	__u64 format_type_ptr;
358 };
359 
360 struct drm_mode_get_plane_res {
361 	__u64 plane_id_ptr;
362 	__u32 count_planes;
363 };
364 
365 #define DRM_MODE_ENCODER_NONE	0
366 #define DRM_MODE_ENCODER_DAC	1
367 #define DRM_MODE_ENCODER_TMDS	2
368 #define DRM_MODE_ENCODER_LVDS	3
369 #define DRM_MODE_ENCODER_TVDAC	4
370 #define DRM_MODE_ENCODER_VIRTUAL 5
371 #define DRM_MODE_ENCODER_DSI	6
372 #define DRM_MODE_ENCODER_DPMST	7
373 #define DRM_MODE_ENCODER_DPI	8
374 
375 struct drm_mode_get_encoder {
376 	__u32 encoder_id;
377 	__u32 encoder_type;
378 
379 	__u32 crtc_id; /**< Id of crtc */
380 
381 	__u32 possible_crtcs;
382 	__u32 possible_clones;
383 };
384 
385 /* This is for connectors with multiple signal types. */
386 /* Try to match DRM_MODE_CONNECTOR_X as closely as possible. */
387 enum drm_mode_subconnector {
388 	DRM_MODE_SUBCONNECTOR_Automatic   = 0,  /* DVI-I, TV     */
389 	DRM_MODE_SUBCONNECTOR_Unknown     = 0,  /* DVI-I, TV, DP */
390 	DRM_MODE_SUBCONNECTOR_VGA	  = 1,  /*            DP */
391 	DRM_MODE_SUBCONNECTOR_DVID	  = 3,  /* DVI-I      DP */
392 	DRM_MODE_SUBCONNECTOR_DVIA	  = 4,  /* DVI-I         */
393 	DRM_MODE_SUBCONNECTOR_Composite   = 5,  /*        TV     */
394 	DRM_MODE_SUBCONNECTOR_SVIDEO	  = 6,  /*        TV     */
395 	DRM_MODE_SUBCONNECTOR_Component   = 8,  /*        TV     */
396 	DRM_MODE_SUBCONNECTOR_SCART	  = 9,  /*        TV     */
397 	DRM_MODE_SUBCONNECTOR_DisplayPort = 10, /*            DP */
398 	DRM_MODE_SUBCONNECTOR_HDMIA       = 11, /*            DP */
399 	DRM_MODE_SUBCONNECTOR_Native      = 15, /*            DP */
400 	DRM_MODE_SUBCONNECTOR_Wireless    = 18, /*            DP */
401 };
402 
403 #define DRM_MODE_CONNECTOR_Unknown	0
404 #define DRM_MODE_CONNECTOR_VGA		1
405 #define DRM_MODE_CONNECTOR_DVII		2
406 #define DRM_MODE_CONNECTOR_DVID		3
407 #define DRM_MODE_CONNECTOR_DVIA		4
408 #define DRM_MODE_CONNECTOR_Composite	5
409 #define DRM_MODE_CONNECTOR_SVIDEO	6
410 #define DRM_MODE_CONNECTOR_LVDS		7
411 #define DRM_MODE_CONNECTOR_Component	8
412 #define DRM_MODE_CONNECTOR_9PinDIN	9
413 #define DRM_MODE_CONNECTOR_DisplayPort	10
414 #define DRM_MODE_CONNECTOR_HDMIA	11
415 #define DRM_MODE_CONNECTOR_HDMIB	12
416 #define DRM_MODE_CONNECTOR_TV		13
417 #define DRM_MODE_CONNECTOR_eDP		14
418 #define DRM_MODE_CONNECTOR_VIRTUAL      15
419 #define DRM_MODE_CONNECTOR_DSI		16
420 #define DRM_MODE_CONNECTOR_DPI		17
421 #define DRM_MODE_CONNECTOR_WRITEBACK	18
422 #define DRM_MODE_CONNECTOR_SPI		19
423 #define DRM_MODE_CONNECTOR_USB		20
424 
425 /**
426  * struct drm_mode_get_connector - Get connector metadata.
427  *
428  * User-space can perform a GETCONNECTOR ioctl to retrieve information about a
429  * connector. User-space is expected to retrieve encoders, modes and properties
430  * by performing this ioctl at least twice: the first time to retrieve the
431  * number of elements, the second time to retrieve the elements themselves.
432  *
433  * To retrieve the number of elements, set @count_props and @count_encoders to
434  * zero, set @count_modes to 1, and set @modes_ptr to a temporary struct
435  * drm_mode_modeinfo element.
436  *
437  * To retrieve the elements, allocate arrays for @encoders_ptr, @modes_ptr,
438  * @props_ptr and @prop_values_ptr, then set @count_modes, @count_props and
439  * @count_encoders to their capacity.
440  *
441  * Performing the ioctl only twice may be racy: the number of elements may have
442  * changed with a hotplug event in-between the two ioctls. User-space is
443  * expected to retry the last ioctl until the number of elements stabilizes.
444  * The kernel won't fill any array which doesn't have the expected length.
445  *
446  * **Force-probing a connector**
447  *
448  * If the @count_modes field is set to zero and the DRM client is the current
449  * DRM master, the kernel will perform a forced probe on the connector to
450  * refresh the connector status, modes and EDID. A forced-probe can be slow,
451  * might cause flickering and the ioctl will block.
452  *
453  * User-space needs to force-probe connectors to ensure their metadata is
454  * up-to-date at startup and after receiving a hot-plug event. User-space
455  * may perform a forced-probe when the user explicitly requests it. User-space
456  * shouldn't perform a forced-probe in other situations.
457  */
458 struct drm_mode_get_connector {
459 	/** @encoders_ptr: Pointer to ``__u32`` array of object IDs. */
460 	__u64 encoders_ptr;
461 	/** @modes_ptr: Pointer to struct drm_mode_modeinfo array. */
462 	__u64 modes_ptr;
463 	/** @props_ptr: Pointer to ``__u32`` array of property IDs. */
464 	__u64 props_ptr;
465 	/** @prop_values_ptr: Pointer to ``__u64`` array of property values. */
466 	__u64 prop_values_ptr;
467 
468 	/** @count_modes: Number of modes. */
469 	__u32 count_modes;
470 	/** @count_props: Number of properties. */
471 	__u32 count_props;
472 	/** @count_encoders: Number of encoders. */
473 	__u32 count_encoders;
474 
475 	/** @encoder_id: Object ID of the current encoder. */
476 	__u32 encoder_id;
477 	/** @connector_id: Object ID of the connector. */
478 	__u32 connector_id;
479 	/**
480 	 * @connector_type: Type of the connector.
481 	 *
482 	 * See DRM_MODE_CONNECTOR_* defines.
483 	 */
484 	__u32 connector_type;
485 	/**
486 	 * @connector_type_id: Type-specific connector number.
487 	 *
488 	 * This is not an object ID. This is a per-type connector number. Each
489 	 * (type, type_id) combination is unique across all connectors of a DRM
490 	 * device.
491 	 *
492 	 * The (type, type_id) combination is not a stable identifier: the
493 	 * type_id can change depending on the driver probe order.
494 	 */
495 	__u32 connector_type_id;
496 
497 	/**
498 	 * @connection: Status of the connector.
499 	 *
500 	 * See enum drm_connector_status.
501 	 */
502 	__u32 connection;
503 	/** @mm_width: Width of the connected sink in millimeters. */
504 	__u32 mm_width;
505 	/** @mm_height: Height of the connected sink in millimeters. */
506 	__u32 mm_height;
507 	/**
508 	 * @subpixel: Subpixel order of the connected sink.
509 	 *
510 	 * See enum subpixel_order.
511 	 */
512 	__u32 subpixel;
513 
514 	/** @pad: Padding, must be zero. */
515 	__u32 pad;
516 };
517 
518 #define DRM_MODE_PROP_PENDING	(1<<0) /* deprecated, do not use */
519 #define DRM_MODE_PROP_RANGE	(1<<1)
520 #define DRM_MODE_PROP_IMMUTABLE	(1<<2)
521 #define DRM_MODE_PROP_ENUM	(1<<3) /* enumerated type with text strings */
522 #define DRM_MODE_PROP_BLOB	(1<<4)
523 #define DRM_MODE_PROP_BITMASK	(1<<5) /* bitmask of enumerated types */
524 
525 /* non-extended types: legacy bitmask, one bit per type: */
526 #define DRM_MODE_PROP_LEGACY_TYPE  ( \
527 		DRM_MODE_PROP_RANGE | \
528 		DRM_MODE_PROP_ENUM | \
529 		DRM_MODE_PROP_BLOB | \
530 		DRM_MODE_PROP_BITMASK)
531 
532 /* extended-types: rather than continue to consume a bit per type,
533  * grab a chunk of the bits to use as integer type id.
534  */
535 #define DRM_MODE_PROP_EXTENDED_TYPE	0x0000ffc0
536 #define DRM_MODE_PROP_TYPE(n)		((n) << 6)
537 #define DRM_MODE_PROP_OBJECT		DRM_MODE_PROP_TYPE(1)
538 #define DRM_MODE_PROP_SIGNED_RANGE	DRM_MODE_PROP_TYPE(2)
539 
540 /* the PROP_ATOMIC flag is used to hide properties from userspace that
541  * is not aware of atomic properties.  This is mostly to work around
542  * older userspace (DDX drivers) that read/write each prop they find,
543  * without being aware that this could be triggering a lengthy modeset.
544  */
545 #define DRM_MODE_PROP_ATOMIC        0x80000000
546 
547 /**
548  * struct drm_mode_property_enum - Description for an enum/bitfield entry.
549  * @value: numeric value for this enum entry.
550  * @name: symbolic name for this enum entry.
551  *
552  * See struct drm_property_enum for details.
553  */
554 struct drm_mode_property_enum {
555 	__u64 value;
556 	char name[DRM_PROP_NAME_LEN];
557 };
558 
559 /**
560  * struct drm_mode_get_property - Get property metadata.
561  *
562  * User-space can perform a GETPROPERTY ioctl to retrieve information about a
563  * property. The same property may be attached to multiple objects, see
564  * "Modeset Base Object Abstraction".
565  *
566  * The meaning of the @values_ptr field changes depending on the property type.
567  * See &drm_property.flags for more details.
568  *
569  * The @enum_blob_ptr and @count_enum_blobs fields are only meaningful when the
570  * property has the type &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK. For
571  * backwards compatibility, the kernel will always set @count_enum_blobs to
572  * zero when the property has the type &DRM_MODE_PROP_BLOB. User-space must
573  * ignore these two fields if the property has a different type.
574  *
575  * User-space is expected to retrieve values and enums by performing this ioctl
576  * at least twice: the first time to retrieve the number of elements, the
577  * second time to retrieve the elements themselves.
578  *
579  * To retrieve the number of elements, set @count_values and @count_enum_blobs
580  * to zero, then call the ioctl. @count_values will be updated with the number
581  * of elements. If the property has the type &DRM_MODE_PROP_ENUM or
582  * &DRM_MODE_PROP_BITMASK, @count_enum_blobs will be updated as well.
583  *
584  * To retrieve the elements themselves, allocate an array for @values_ptr and
585  * set @count_values to its capacity. If the property has the type
586  * &DRM_MODE_PROP_ENUM or &DRM_MODE_PROP_BITMASK, allocate an array for
587  * @enum_blob_ptr and set @count_enum_blobs to its capacity. Calling the ioctl
588  * again will fill the arrays.
589  */
590 struct drm_mode_get_property {
591 	/** @values_ptr: Pointer to a ``__u64`` array. */
592 	__u64 values_ptr;
593 	/** @enum_blob_ptr: Pointer to a struct drm_mode_property_enum array. */
594 	__u64 enum_blob_ptr;
595 
596 	/**
597 	 * @prop_id: Object ID of the property which should be retrieved. Set
598 	 * by the caller.
599 	 */
600 	__u32 prop_id;
601 	/**
602 	 * @flags: ``DRM_MODE_PROP_*`` bitfield. See &drm_property.flags for
603 	 * a definition of the flags.
604 	 */
605 	__u32 flags;
606 	/**
607 	 * @name: Symbolic property name. User-space should use this field to
608 	 * recognize properties.
609 	 */
610 	char name[DRM_PROP_NAME_LEN];
611 
612 	/** @count_values: Number of elements in @values_ptr. */
613 	__u32 count_values;
614 	/** @count_enum_blobs: Number of elements in @enum_blob_ptr. */
615 	__u32 count_enum_blobs;
616 };
617 
618 struct drm_mode_connector_set_property {
619 	__u64 value;
620 	__u32 prop_id;
621 	__u32 connector_id;
622 };
623 
624 #define DRM_MODE_OBJECT_CRTC 0xcccccccc
625 #define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0
626 #define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0
627 #define DRM_MODE_OBJECT_MODE 0xdededede
628 #define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0
629 #define DRM_MODE_OBJECT_FB 0xfbfbfbfb
630 #define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb
631 #define DRM_MODE_OBJECT_PLANE 0xeeeeeeee
632 #define DRM_MODE_OBJECT_ANY 0
633 
634 struct drm_mode_obj_get_properties {
635 	__u64 props_ptr;
636 	__u64 prop_values_ptr;
637 	__u32 count_props;
638 	__u32 obj_id;
639 	__u32 obj_type;
640 };
641 
642 struct drm_mode_obj_set_property {
643 	__u64 value;
644 	__u32 prop_id;
645 	__u32 obj_id;
646 	__u32 obj_type;
647 };
648 
649 struct drm_mode_get_blob {
650 	__u32 blob_id;
651 	__u32 length;
652 	__u64 data;
653 };
654 
655 struct drm_mode_fb_cmd {
656 	__u32 fb_id;
657 	__u32 width;
658 	__u32 height;
659 	__u32 pitch;
660 	__u32 bpp;
661 	__u32 depth;
662 	/* driver specific handle */
663 	__u32 handle;
664 };
665 
666 #define DRM_MODE_FB_INTERLACED	(1<<0) /* for interlaced framebuffers */
667 #define DRM_MODE_FB_MODIFIERS	(1<<1) /* enables ->modifier[] */
668 
669 /**
670  * struct drm_mode_fb_cmd2 - Frame-buffer metadata.
671  *
672  * This struct holds frame-buffer metadata. There are two ways to use it:
673  *
674  * - User-space can fill this struct and perform a &DRM_IOCTL_MODE_ADDFB2
675  *   ioctl to register a new frame-buffer. The new frame-buffer object ID will
676  *   be set by the kernel in @fb_id.
677  * - User-space can set @fb_id and perform a &DRM_IOCTL_MODE_GETFB2 ioctl to
678  *   fetch metadata about an existing frame-buffer.
679  *
680  * In case of planar formats, this struct allows up to 4 buffer objects with
681  * offsets and pitches per plane. The pitch and offset order are dictated by
682  * the format FourCC as defined by ``drm_fourcc.h``, e.g. NV12 is described as:
683  *
684  *     YUV 4:2:0 image with a plane of 8-bit Y samples followed by an
685  *     interleaved U/V plane containing 8-bit 2x2 subsampled colour difference
686  *     samples.
687  *
688  * So it would consist of a Y plane at ``offsets[0]`` and a UV plane at
689  * ``offsets[1]``.
690  *
691  * To accommodate tiled, compressed, etc formats, a modifier can be specified.
692  * For more information see the "Format Modifiers" section. Note that even
693  * though it looks like we have a modifier per-plane, we in fact do not. The
694  * modifier for each plane must be identical. Thus all combinations of
695  * different data layouts for multi-plane formats must be enumerated as
696  * separate modifiers.
697  *
698  * All of the entries in @handles, @pitches, @offsets and @modifier must be
699  * zero when unused. Warning, for @offsets and @modifier zero can't be used to
700  * figure out whether the entry is used or not since it's a valid value (a zero
701  * offset is common, and a zero modifier is &DRM_FORMAT_MOD_LINEAR).
702  */
703 struct drm_mode_fb_cmd2 {
704 	/** @fb_id: Object ID of the frame-buffer. */
705 	__u32 fb_id;
706 	/** @width: Width of the frame-buffer. */
707 	__u32 width;
708 	/** @height: Height of the frame-buffer. */
709 	__u32 height;
710 	/**
711 	 * @pixel_format: FourCC format code, see ``DRM_FORMAT_*`` constants in
712 	 * ``drm_fourcc.h``.
713 	 */
714 	__u32 pixel_format;
715 	/**
716 	 * @flags: Frame-buffer flags (see &DRM_MODE_FB_INTERLACED and
717 	 * &DRM_MODE_FB_MODIFIERS).
718 	 */
719 	__u32 flags;
720 
721 	/**
722 	 * @handles: GEM buffer handle, one per plane. Set to 0 if the plane is
723 	 * unused. The same handle can be used for multiple planes.
724 	 */
725 	__u32 handles[4];
726 	/** @pitches: Pitch (aka. stride) in bytes, one per plane. */
727 	__u32 pitches[4];
728 	/** @offsets: Offset into the buffer in bytes, one per plane. */
729 	__u32 offsets[4];
730 	/**
731 	 * @modifier: Format modifier, one per plane. See ``DRM_FORMAT_MOD_*``
732 	 * constants in ``drm_fourcc.h``. All planes must use the same
733 	 * modifier. Ignored unless &DRM_MODE_FB_MODIFIERS is set in @flags.
734 	 */
735 	__u64 modifier[4];
736 };
737 
738 #define DRM_MODE_FB_DIRTY_ANNOTATE_COPY 0x01
739 #define DRM_MODE_FB_DIRTY_ANNOTATE_FILL 0x02
740 #define DRM_MODE_FB_DIRTY_FLAGS         0x03
741 
742 #define DRM_MODE_FB_DIRTY_MAX_CLIPS     256
743 
744 /*
745  * Mark a region of a framebuffer as dirty.
746  *
747  * Some hardware does not automatically update display contents
748  * as a hardware or software draw to a framebuffer. This ioctl
749  * allows userspace to tell the kernel and the hardware what
750  * regions of the framebuffer have changed.
751  *
752  * The kernel or hardware is free to update more then just the
753  * region specified by the clip rects. The kernel or hardware
754  * may also delay and/or coalesce several calls to dirty into a
755  * single update.
756  *
757  * Userspace may annotate the updates, the annotates are a
758  * promise made by the caller that the change is either a copy
759  * of pixels or a fill of a single color in the region specified.
760  *
761  * If the DRM_MODE_FB_DIRTY_ANNOTATE_COPY flag is given then
762  * the number of updated regions are half of num_clips given,
763  * where the clip rects are paired in src and dst. The width and
764  * height of each one of the pairs must match.
765  *
766  * If the DRM_MODE_FB_DIRTY_ANNOTATE_FILL flag is given the caller
767  * promises that the region specified of the clip rects is filled
768  * completely with a single color as given in the color argument.
769  */
770 
771 struct drm_mode_fb_dirty_cmd {
772 	__u32 fb_id;
773 	__u32 flags;
774 	__u32 color;
775 	__u32 num_clips;
776 	__u64 clips_ptr;
777 };
778 
779 struct drm_mode_mode_cmd {
780 	__u32 connector_id;
781 	struct drm_mode_modeinfo mode;
782 };
783 
784 #define DRM_MODE_CURSOR_BO	0x01
785 #define DRM_MODE_CURSOR_MOVE	0x02
786 #define DRM_MODE_CURSOR_FLAGS	0x03
787 
788 /*
789  * depending on the value in flags different members are used.
790  *
791  * CURSOR_BO uses
792  *    crtc_id
793  *    width
794  *    height
795  *    handle - if 0 turns the cursor off
796  *
797  * CURSOR_MOVE uses
798  *    crtc_id
799  *    x
800  *    y
801  */
802 struct drm_mode_cursor {
803 	__u32 flags;
804 	__u32 crtc_id;
805 	__s32 x;
806 	__s32 y;
807 	__u32 width;
808 	__u32 height;
809 	/* driver specific handle */
810 	__u32 handle;
811 };
812 
813 struct drm_mode_cursor2 {
814 	__u32 flags;
815 	__u32 crtc_id;
816 	__s32 x;
817 	__s32 y;
818 	__u32 width;
819 	__u32 height;
820 	/* driver specific handle */
821 	__u32 handle;
822 	__s32 hot_x;
823 	__s32 hot_y;
824 };
825 
826 struct drm_mode_crtc_lut {
827 	__u32 crtc_id;
828 	__u32 gamma_size;
829 
830 	/* pointers to arrays */
831 	__u64 red;
832 	__u64 green;
833 	__u64 blue;
834 };
835 
836 struct drm_color_ctm {
837 	/*
838 	 * Conversion matrix in S31.32 sign-magnitude
839 	 * (not two's complement!) format.
840 	 *
841 	 * out   matrix    in
842 	 * |R|   |0 1 2|   |R|
843 	 * |G| = |3 4 5| x |G|
844 	 * |B|   |6 7 8|   |B|
845 	 */
846 	__u64 matrix[9];
847 };
848 
849 struct drm_color_lut {
850 	/*
851 	 * Values are mapped linearly to 0.0 - 1.0 range, with 0x0 == 0.0 and
852 	 * 0xffff == 1.0.
853 	 */
854 	__u16 red;
855 	__u16 green;
856 	__u16 blue;
857 	__u16 reserved;
858 };
859 
860 /**
861  * struct drm_plane_size_hint - Plane size hints
862  * @width: The width of the plane in pixel
863  * @height: The height of the plane in pixel
864  *
865  * The plane SIZE_HINTS property blob contains an
866  * array of struct drm_plane_size_hint.
867  */
868 struct drm_plane_size_hint {
869 	__u16 width;
870 	__u16 height;
871 };
872 
873 /**
874  * struct hdr_metadata_infoframe - HDR Metadata Infoframe Data.
875  *
876  * HDR Metadata Infoframe as per CTA 861.G spec. This is expected
877  * to match exactly with the spec.
878  *
879  * Userspace is expected to pass the metadata information as per
880  * the format described in this structure.
881  */
882 struct hdr_metadata_infoframe {
883 	/**
884 	 * @eotf: Electro-Optical Transfer Function (EOTF)
885 	 * used in the stream.
886 	 */
887 	__u8 eotf;
888 	/**
889 	 * @metadata_type: Static_Metadata_Descriptor_ID.
890 	 */
891 	__u8 metadata_type;
892 	/**
893 	 * @display_primaries: Color Primaries of the Data.
894 	 * These are coded as unsigned 16-bit values in units of
895 	 * 0.00002, where 0x0000 represents zero and 0xC350
896 	 * represents 1.0000.
897 	 * @display_primaries.x: X coordinate of color primary.
898 	 * @display_primaries.y: Y coordinate of color primary.
899 	 */
900 	struct {
901 		__u16 x, y;
902 	} display_primaries[3];
903 	/**
904 	 * @white_point: White Point of Colorspace Data.
905 	 * These are coded as unsigned 16-bit values in units of
906 	 * 0.00002, where 0x0000 represents zero and 0xC350
907 	 * represents 1.0000.
908 	 * @white_point.x: X coordinate of whitepoint of color primary.
909 	 * @white_point.y: Y coordinate of whitepoint of color primary.
910 	 */
911 	struct {
912 		__u16 x, y;
913 	} white_point;
914 	/**
915 	 * @max_display_mastering_luminance: Max Mastering Display Luminance.
916 	 * This value is coded as an unsigned 16-bit value in units of 1 cd/m2,
917 	 * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2.
918 	 */
919 	__u16 max_display_mastering_luminance;
920 	/**
921 	 * @min_display_mastering_luminance: Min Mastering Display Luminance.
922 	 * This value is coded as an unsigned 16-bit value in units of
923 	 * 0.0001 cd/m2, where 0x0001 represents 0.0001 cd/m2 and 0xFFFF
924 	 * represents 6.5535 cd/m2.
925 	 */
926 	__u16 min_display_mastering_luminance;
927 	/**
928 	 * @max_cll: Max Content Light Level.
929 	 * This value is coded as an unsigned 16-bit value in units of 1 cd/m2,
930 	 * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2.
931 	 */
932 	__u16 max_cll;
933 	/**
934 	 * @max_fall: Max Frame Average Light Level.
935 	 * This value is coded as an unsigned 16-bit value in units of 1 cd/m2,
936 	 * where 0x0001 represents 1 cd/m2 and 0xFFFF represents 65535 cd/m2.
937 	 */
938 	__u16 max_fall;
939 };
940 
941 /**
942  * struct hdr_output_metadata - HDR output metadata
943  *
944  * Metadata Information to be passed from userspace
945  */
946 struct hdr_output_metadata {
947 	/**
948 	 * @metadata_type: Static_Metadata_Descriptor_ID.
949 	 */
950 	__u32 metadata_type;
951 	/**
952 	 * @hdmi_metadata_type1: HDR Metadata Infoframe.
953 	 */
954 	union {
955 		struct hdr_metadata_infoframe hdmi_metadata_type1;
956 	};
957 };
958 
959 /**
960  * DRM_MODE_PAGE_FLIP_EVENT
961  *
962  * Request that the kernel sends back a vblank event (see
963  * struct drm_event_vblank) with the &DRM_EVENT_FLIP_COMPLETE type when the
964  * page-flip is done.
965  */
966 #define DRM_MODE_PAGE_FLIP_EVENT 0x01
967 /**
968  * DRM_MODE_PAGE_FLIP_ASYNC
969  *
970  * Request that the page-flip is performed as soon as possible, ie. with no
971  * delay due to waiting for vblank. This may cause tearing to be visible on
972  * the screen.
973  *
974  * When used with atomic uAPI, the driver will return an error if the hardware
975  * doesn't support performing an asynchronous page-flip for this update.
976  * User-space should handle this, e.g. by falling back to a regular page-flip.
977  *
978  * Note, some hardware might need to perform one last synchronous page-flip
979  * before being able to switch to asynchronous page-flips. As an exception,
980  * the driver will return success even though that first page-flip is not
981  * asynchronous.
982  */
983 #define DRM_MODE_PAGE_FLIP_ASYNC 0x02
984 #define DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE 0x4
985 #define DRM_MODE_PAGE_FLIP_TARGET_RELATIVE 0x8
986 #define DRM_MODE_PAGE_FLIP_TARGET (DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE | \
987 				   DRM_MODE_PAGE_FLIP_TARGET_RELATIVE)
988 /**
989  * DRM_MODE_PAGE_FLIP_FLAGS
990  *
991  * Bitmask of flags suitable for &drm_mode_crtc_page_flip_target.flags.
992  */
993 #define DRM_MODE_PAGE_FLIP_FLAGS (DRM_MODE_PAGE_FLIP_EVENT | \
994 				  DRM_MODE_PAGE_FLIP_ASYNC | \
995 				  DRM_MODE_PAGE_FLIP_TARGET)
996 
997 /*
998  * Request a page flip on the specified crtc.
999  *
1000  * This ioctl will ask KMS to schedule a page flip for the specified
1001  * crtc.  Once any pending rendering targeting the specified fb (as of
1002  * ioctl time) has completed, the crtc will be reprogrammed to display
1003  * that fb after the next vertical refresh.  The ioctl returns
1004  * immediately, but subsequent rendering to the current fb will block
1005  * in the execbuffer ioctl until the page flip happens.  If a page
1006  * flip is already pending as the ioctl is called, EBUSY will be
1007  * returned.
1008  *
1009  * Flag DRM_MODE_PAGE_FLIP_EVENT requests that drm sends back a vblank
1010  * event (see drm.h: struct drm_event_vblank) when the page flip is
1011  * done.  The user_data field passed in with this ioctl will be
1012  * returned as the user_data field in the vblank event struct.
1013  *
1014  * Flag DRM_MODE_PAGE_FLIP_ASYNC requests that the flip happen
1015  * 'as soon as possible', meaning that it not delay waiting for vblank.
1016  * This may cause tearing on the screen.
1017  *
1018  * The reserved field must be zero.
1019  */
1020 
1021 struct drm_mode_crtc_page_flip {
1022 	__u32 crtc_id;
1023 	__u32 fb_id;
1024 	__u32 flags;
1025 	__u32 reserved;
1026 	__u64 user_data;
1027 };
1028 
1029 /*
1030  * Request a page flip on the specified crtc.
1031  *
1032  * Same as struct drm_mode_crtc_page_flip, but supports new flags and
1033  * re-purposes the reserved field:
1034  *
1035  * The sequence field must be zero unless either of the
1036  * DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags is specified. When
1037  * the ABSOLUTE flag is specified, the sequence field denotes the absolute
1038  * vblank sequence when the flip should take effect. When the RELATIVE
1039  * flag is specified, the sequence field denotes the relative (to the
1040  * current one when the ioctl is called) vblank sequence when the flip
1041  * should take effect. NOTE: DRM_IOCTL_WAIT_VBLANK must still be used to
1042  * make sure the vblank sequence before the target one has passed before
1043  * calling this ioctl. The purpose of the
1044  * DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags is merely to clarify
1045  * the target for when code dealing with a page flip runs during a
1046  * vertical blank period.
1047  */
1048 
1049 struct drm_mode_crtc_page_flip_target {
1050 	__u32 crtc_id;
1051 	__u32 fb_id;
1052 	__u32 flags;
1053 	__u32 sequence;
1054 	__u64 user_data;
1055 };
1056 
1057 /**
1058  * struct drm_mode_create_dumb - Create a KMS dumb buffer for scanout.
1059  * @height: buffer height in pixels
1060  * @width: buffer width in pixels
1061  * @bpp: bits per pixel
1062  * @flags: must be zero
1063  * @handle: buffer object handle
1064  * @pitch: number of bytes between two consecutive lines
1065  * @size: size of the whole buffer in bytes
1066  *
1067  * User-space fills @height, @width, @bpp and @flags. If the IOCTL succeeds,
1068  * the kernel fills @handle, @pitch and @size.
1069  */
1070 struct drm_mode_create_dumb {
1071 	__u32 height;
1072 	__u32 width;
1073 	__u32 bpp;
1074 	__u32 flags;
1075 
1076 	__u32 handle;
1077 	__u32 pitch;
1078 	__u64 size;
1079 };
1080 
1081 /* set up for mmap of a dumb scanout buffer */
1082 struct drm_mode_map_dumb {
1083 	/** Handle for the object being mapped. */
1084 	__u32 handle;
1085 	__u32 pad;
1086 	/**
1087 	 * Fake offset to use for subsequent mmap call
1088 	 *
1089 	 * This is a fixed-size type for 32/64 compatibility.
1090 	 */
1091 	__u64 offset;
1092 };
1093 
1094 struct drm_mode_destroy_dumb {
1095 	__u32 handle;
1096 };
1097 
1098 /**
1099  * DRM_MODE_ATOMIC_TEST_ONLY
1100  *
1101  * Do not apply the atomic commit, instead check whether the hardware supports
1102  * this configuration.
1103  *
1104  * See &drm_mode_config_funcs.atomic_check for more details on test-only
1105  * commits.
1106  */
1107 #define DRM_MODE_ATOMIC_TEST_ONLY 0x0100
1108 /**
1109  * DRM_MODE_ATOMIC_NONBLOCK
1110  *
1111  * Do not block while applying the atomic commit. The &DRM_IOCTL_MODE_ATOMIC
1112  * IOCTL returns immediately instead of waiting for the changes to be applied
1113  * in hardware. Note, the driver will still check that the update can be
1114  * applied before retuning.
1115  */
1116 #define DRM_MODE_ATOMIC_NONBLOCK  0x0200
1117 /**
1118  * DRM_MODE_ATOMIC_ALLOW_MODESET
1119  *
1120  * Allow the update to result in temporary or transient visible artifacts while
1121  * the update is being applied. Applying the update may also take significantly
1122  * more time than a page flip. All visual artifacts will disappear by the time
1123  * the update is completed, as signalled through the vblank event's timestamp
1124  * (see struct drm_event_vblank).
1125  *
1126  * This flag must be set when the KMS update might cause visible artifacts.
1127  * Without this flag such KMS update will return a EINVAL error. What kind of
1128  * update may cause visible artifacts depends on the driver and the hardware.
1129  * User-space that needs to know beforehand if an update might cause visible
1130  * artifacts can use &DRM_MODE_ATOMIC_TEST_ONLY without
1131  * &DRM_MODE_ATOMIC_ALLOW_MODESET to see if it fails.
1132  *
1133  * To the best of the driver's knowledge, visual artifacts are guaranteed to
1134  * not appear when this flag is not set. Some sinks might display visual
1135  * artifacts outside of the driver's control.
1136  */
1137 #define DRM_MODE_ATOMIC_ALLOW_MODESET 0x0400
1138 
1139 /**
1140  * DRM_MODE_ATOMIC_FLAGS
1141  *
1142  * Bitfield of flags accepted by the &DRM_IOCTL_MODE_ATOMIC IOCTL in
1143  * &drm_mode_atomic.flags.
1144  */
1145 #define DRM_MODE_ATOMIC_FLAGS (\
1146 		DRM_MODE_PAGE_FLIP_EVENT |\
1147 		DRM_MODE_PAGE_FLIP_ASYNC |\
1148 		DRM_MODE_ATOMIC_TEST_ONLY |\
1149 		DRM_MODE_ATOMIC_NONBLOCK |\
1150 		DRM_MODE_ATOMIC_ALLOW_MODESET)
1151 
1152 struct drm_mode_atomic {
1153 	__u32 flags;
1154 	__u32 count_objs;
1155 	__u64 objs_ptr;
1156 	__u64 count_props_ptr;
1157 	__u64 props_ptr;
1158 	__u64 prop_values_ptr;
1159 	__u64 reserved;
1160 	__u64 user_data;
1161 };
1162 
1163 struct drm_format_modifier_blob {
1164 #define FORMAT_BLOB_CURRENT 1
1165 	/* Version of this blob format */
1166 	__u32 version;
1167 
1168 	/* Flags */
1169 	__u32 flags;
1170 
1171 	/* Number of fourcc formats supported */
1172 	__u32 count_formats;
1173 
1174 	/* Where in this blob the formats exist (in bytes) */
1175 	__u32 formats_offset;
1176 
1177 	/* Number of drm_format_modifiers */
1178 	__u32 count_modifiers;
1179 
1180 	/* Where in this blob the modifiers exist (in bytes) */
1181 	__u32 modifiers_offset;
1182 
1183 	/* __u32 formats[] */
1184 	/* struct drm_format_modifier modifiers[] */
1185 };
1186 
1187 struct drm_format_modifier {
1188 	/* Bitmask of formats in get_plane format list this info applies to. The
1189 	 * offset allows a sliding window of which 64 formats (bits).
1190 	 *
1191 	 * Some examples:
1192 	 * In today's world with < 65 formats, and formats 0, and 2 are
1193 	 * supported
1194 	 * 0x0000000000000005
1195 	 *		  ^-offset = 0, formats = 5
1196 	 *
1197 	 * If the number formats grew to 128, and formats 98-102 are
1198 	 * supported with the modifier:
1199 	 *
1200 	 * 0x0000007c00000000 0000000000000000
1201 	 *		  ^
1202 	 *		  |__offset = 64, formats = 0x7c00000000
1203 	 *
1204 	 */
1205 	__u64 formats;
1206 	__u32 offset;
1207 	__u32 pad;
1208 
1209 	/* The modifier that applies to the >get_plane format list bitmask. */
1210 	__u64 modifier;
1211 };
1212 
1213 /**
1214  * struct drm_mode_create_blob - Create New blob property
1215  *
1216  * Create a new 'blob' data property, copying length bytes from data pointer,
1217  * and returning new blob ID.
1218  */
1219 struct drm_mode_create_blob {
1220 	/** @data: Pointer to data to copy. */
1221 	__u64 data;
1222 	/** @length: Length of data to copy. */
1223 	__u32 length;
1224 	/** @blob_id: Return: new property ID. */
1225 	__u32 blob_id;
1226 };
1227 
1228 /**
1229  * struct drm_mode_destroy_blob - Destroy user blob
1230  * @blob_id: blob_id to destroy
1231  *
1232  * Destroy a user-created blob property.
1233  *
1234  * User-space can release blobs as soon as they do not need to refer to them by
1235  * their blob object ID.  For instance, if you are using a MODE_ID blob in an
1236  * atomic commit and you will not make another commit re-using the same ID, you
1237  * can destroy the blob as soon as the commit has been issued, without waiting
1238  * for it to complete.
1239  */
1240 struct drm_mode_destroy_blob {
1241 	__u32 blob_id;
1242 };
1243 
1244 /**
1245  * struct drm_mode_create_lease - Create lease
1246  *
1247  * Lease mode resources, creating another drm_master.
1248  *
1249  * The @object_ids array must reference at least one CRTC, one connector and
1250  * one plane if &DRM_CLIENT_CAP_UNIVERSAL_PLANES is enabled. Alternatively,
1251  * the lease can be completely empty.
1252  */
1253 struct drm_mode_create_lease {
1254 	/** @object_ids: Pointer to array of object ids (__u32) */
1255 	__u64 object_ids;
1256 	/** @object_count: Number of object ids */
1257 	__u32 object_count;
1258 	/** @flags: flags for new FD (O_CLOEXEC, etc) */
1259 	__u32 flags;
1260 
1261 	/** @lessee_id: Return: unique identifier for lessee. */
1262 	__u32 lessee_id;
1263 	/** @fd: Return: file descriptor to new drm_master file */
1264 	__u32 fd;
1265 };
1266 
1267 /**
1268  * struct drm_mode_list_lessees - List lessees
1269  *
1270  * List lesses from a drm_master.
1271  */
1272 struct drm_mode_list_lessees {
1273 	/**
1274 	 * @count_lessees: Number of lessees.
1275 	 *
1276 	 * On input, provides length of the array.
1277 	 * On output, provides total number. No
1278 	 * more than the input number will be written
1279 	 * back, so two calls can be used to get
1280 	 * the size and then the data.
1281 	 */
1282 	__u32 count_lessees;
1283 	/** @pad: Padding. */
1284 	__u32 pad;
1285 
1286 	/**
1287 	 * @lessees_ptr: Pointer to lessees.
1288 	 *
1289 	 * Pointer to __u64 array of lessee ids
1290 	 */
1291 	__u64 lessees_ptr;
1292 };
1293 
1294 /**
1295  * struct drm_mode_get_lease - Get Lease
1296  *
1297  * Get leased objects.
1298  */
1299 struct drm_mode_get_lease {
1300 	/**
1301 	 * @count_objects: Number of leased objects.
1302 	 *
1303 	 * On input, provides length of the array.
1304 	 * On output, provides total number. No
1305 	 * more than the input number will be written
1306 	 * back, so two calls can be used to get
1307 	 * the size and then the data.
1308 	 */
1309 	__u32 count_objects;
1310 	/** @pad: Padding. */
1311 	__u32 pad;
1312 
1313 	/**
1314 	 * @objects_ptr: Pointer to objects.
1315 	 *
1316 	 * Pointer to __u32 array of object ids.
1317 	 */
1318 	__u64 objects_ptr;
1319 };
1320 
1321 /**
1322  * struct drm_mode_revoke_lease - Revoke lease
1323  */
1324 struct drm_mode_revoke_lease {
1325 	/** @lessee_id: Unique ID of lessee */
1326 	__u32 lessee_id;
1327 };
1328 
1329 /**
1330  * struct drm_mode_rect - Two dimensional rectangle.
1331  * @x1: Horizontal starting coordinate (inclusive).
1332  * @y1: Vertical starting coordinate (inclusive).
1333  * @x2: Horizontal ending coordinate (exclusive).
1334  * @y2: Vertical ending coordinate (exclusive).
1335  *
1336  * With drm subsystem using struct drm_rect to manage rectangular area this
1337  * export it to user-space.
1338  *
1339  * Currently used by drm_mode_atomic blob property FB_DAMAGE_CLIPS.
1340  */
1341 struct drm_mode_rect {
1342 	__s32 x1;
1343 	__s32 y1;
1344 	__s32 x2;
1345 	__s32 y2;
1346 };
1347 
1348 /**
1349  * struct drm_mode_closefb
1350  * @fb_id: Framebuffer ID.
1351  * @pad: Must be zero.
1352  */
1353 struct drm_mode_closefb {
1354 	__u32 fb_id;
1355 	__u32 pad;
1356 };
1357 
1358 #if defined(__cplusplus)
1359 }
1360 #endif
1361 
1362 #endif
1363