1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * USB Attached SCSI
4 * Note that this is not the same as the USB Mass Storage driver
5 *
6 * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016
7 * Copyright Matthew Wilcox for Intel Corp, 2010
8 * Copyright Sarah Sharp for Intel Corp, 2010
9 */
10
11 #include <linux/blkdev.h>
12 #include <linux/slab.h>
13 #include <linux/types.h>
14 #include <linux/module.h>
15 #include <linux/usb.h>
16 #include <linux/usb_usual.h>
17 #include <linux/usb/hcd.h>
18 #include <linux/usb/storage.h>
19 #include <linux/usb/uas.h>
20
21 #include <scsi/scsi.h>
22 #include <scsi/scsi_eh.h>
23 #include <scsi/scsi_dbg.h>
24 #include <scsi/scsi_devinfo.h>
25 #include <scsi/scsi_cmnd.h>
26 #include <scsi/scsi_device.h>
27 #include <scsi/scsi_host.h>
28 #include <scsi/scsi_tcq.h>
29
30 #include "uas-detect.h"
31 #include "scsiglue.h"
32
33 #define MAX_CMNDS 256
34
35 struct uas_dev_info {
36 struct usb_interface *intf;
37 struct usb_device *udev;
38 struct usb_anchor cmd_urbs;
39 struct usb_anchor sense_urbs;
40 struct usb_anchor data_urbs;
41 u64 flags;
42 int qdepth, resetting;
43 unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
44 unsigned use_streams:1;
45 unsigned shutdown:1;
46 struct scsi_cmnd *cmnd[MAX_CMNDS];
47 spinlock_t lock;
48 struct work_struct work;
49 struct work_struct scan_work; /* for async scanning */
50 };
51
52 enum {
53 SUBMIT_STATUS_URB = BIT(1),
54 ALLOC_DATA_IN_URB = BIT(2),
55 SUBMIT_DATA_IN_URB = BIT(3),
56 ALLOC_DATA_OUT_URB = BIT(4),
57 SUBMIT_DATA_OUT_URB = BIT(5),
58 ALLOC_CMD_URB = BIT(6),
59 SUBMIT_CMD_URB = BIT(7),
60 COMMAND_INFLIGHT = BIT(8),
61 DATA_IN_URB_INFLIGHT = BIT(9),
62 DATA_OUT_URB_INFLIGHT = BIT(10),
63 COMMAND_ABORTED = BIT(11),
64 IS_IN_WORK_LIST = BIT(12),
65 };
66
67 /* Overrides scsi_pointer */
68 struct uas_cmd_info {
69 unsigned int state;
70 unsigned int uas_tag;
71 struct urb *cmd_urb;
72 struct urb *data_in_urb;
73 struct urb *data_out_urb;
74 };
75
76 /* I hate forward declarations, but I actually have a loop */
77 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
78 struct uas_dev_info *devinfo);
79 static void uas_do_work(struct work_struct *work);
80 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
81 static void uas_free_streams(struct uas_dev_info *devinfo);
82 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
83 int status);
84
85 /*
86 * This driver needs its own workqueue, as we need to control memory allocation.
87 *
88 * In the course of error handling and power management uas_wait_for_pending_cmnds()
89 * needs to flush pending work items. In these contexts we cannot allocate memory
90 * by doing block IO as we would deadlock. For the same reason we cannot wait
91 * for anything allocating memory not heeding these constraints.
92 *
93 * So we have to control all work items that can be on the workqueue we flush.
94 * Hence we cannot share a queue and need our own.
95 */
96 static struct workqueue_struct *workqueue;
97
uas_do_work(struct work_struct * work)98 static void uas_do_work(struct work_struct *work)
99 {
100 struct uas_dev_info *devinfo =
101 container_of(work, struct uas_dev_info, work);
102 struct uas_cmd_info *cmdinfo;
103 struct scsi_cmnd *cmnd;
104 unsigned long flags;
105 int i, err;
106
107 spin_lock_irqsave(&devinfo->lock, flags);
108
109 if (devinfo->resetting)
110 goto out;
111
112 for (i = 0; i < devinfo->qdepth; i++) {
113 if (!devinfo->cmnd[i])
114 continue;
115
116 cmnd = devinfo->cmnd[i];
117 cmdinfo = scsi_cmd_priv(cmnd);
118
119 if (!(cmdinfo->state & IS_IN_WORK_LIST))
120 continue;
121
122 err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
123 if (!err)
124 cmdinfo->state &= ~IS_IN_WORK_LIST;
125 else
126 queue_work(workqueue, &devinfo->work);
127 }
128 out:
129 spin_unlock_irqrestore(&devinfo->lock, flags);
130 }
131
uas_scan_work(struct work_struct * work)132 static void uas_scan_work(struct work_struct *work)
133 {
134 struct uas_dev_info *devinfo =
135 container_of(work, struct uas_dev_info, scan_work);
136 struct Scsi_Host *shost = usb_get_intfdata(devinfo->intf);
137
138 dev_dbg(&devinfo->intf->dev, "starting scan\n");
139 scsi_scan_host(shost);
140 dev_dbg(&devinfo->intf->dev, "scan complete\n");
141 }
142
uas_add_work(struct scsi_cmnd * cmnd)143 static void uas_add_work(struct scsi_cmnd *cmnd)
144 {
145 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
146 struct uas_dev_info *devinfo = cmnd->device->hostdata;
147
148 lockdep_assert_held(&devinfo->lock);
149 cmdinfo->state |= IS_IN_WORK_LIST;
150 queue_work(workqueue, &devinfo->work);
151 }
152
uas_zap_pending(struct uas_dev_info * devinfo,int result)153 static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
154 {
155 struct uas_cmd_info *cmdinfo;
156 struct scsi_cmnd *cmnd;
157 unsigned long flags;
158 int i, err;
159
160 spin_lock_irqsave(&devinfo->lock, flags);
161 for (i = 0; i < devinfo->qdepth; i++) {
162 if (!devinfo->cmnd[i])
163 continue;
164
165 cmnd = devinfo->cmnd[i];
166 cmdinfo = scsi_cmd_priv(cmnd);
167 uas_log_cmd_state(cmnd, __func__, 0);
168 /* Sense urbs were killed, clear COMMAND_INFLIGHT manually */
169 cmdinfo->state &= ~COMMAND_INFLIGHT;
170 cmnd->result = result << 16;
171 err = uas_try_complete(cmnd, __func__);
172 WARN_ON(err != 0);
173 }
174 spin_unlock_irqrestore(&devinfo->lock, flags);
175 }
176
uas_sense(struct urb * urb,struct scsi_cmnd * cmnd)177 static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
178 {
179 struct sense_iu *sense_iu = urb->transfer_buffer;
180 struct scsi_device *sdev = cmnd->device;
181
182 if (urb->actual_length > 16) {
183 unsigned len = be16_to_cpup(&sense_iu->len);
184 if (len + 16 != urb->actual_length) {
185 int newlen = min(len + 16, urb->actual_length) - 16;
186 if (newlen < 0)
187 newlen = 0;
188 sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
189 "disagrees with IU sense data length %d, "
190 "using %d bytes of sense data\n", __func__,
191 urb->actual_length, len, newlen);
192 len = newlen;
193 }
194 memcpy(cmnd->sense_buffer, sense_iu->sense, len);
195 }
196
197 cmnd->result = sense_iu->status;
198 }
199
uas_log_cmd_state(struct scsi_cmnd * cmnd,const char * prefix,int status)200 static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
201 int status)
202 {
203 struct uas_cmd_info *ci = scsi_cmd_priv(cmnd);
204
205 if (status == -ENODEV) /* too late */
206 return;
207
208 scmd_printk(KERN_INFO, cmnd,
209 "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
210 prefix, status, ci->uas_tag,
211 (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "",
212 (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "",
213 (ci->state & SUBMIT_DATA_IN_URB) ? " s-in" : "",
214 (ci->state & ALLOC_DATA_OUT_URB) ? " a-out" : "",
215 (ci->state & SUBMIT_DATA_OUT_URB) ? " s-out" : "",
216 (ci->state & ALLOC_CMD_URB) ? " a-cmd" : "",
217 (ci->state & SUBMIT_CMD_URB) ? " s-cmd" : "",
218 (ci->state & COMMAND_INFLIGHT) ? " CMD" : "",
219 (ci->state & DATA_IN_URB_INFLIGHT) ? " IN" : "",
220 (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT" : "",
221 (ci->state & COMMAND_ABORTED) ? " abort" : "",
222 (ci->state & IS_IN_WORK_LIST) ? " work" : "");
223 scsi_print_command(cmnd);
224 }
225
uas_free_unsubmitted_urbs(struct scsi_cmnd * cmnd)226 static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd)
227 {
228 struct uas_cmd_info *cmdinfo;
229
230 if (!cmnd)
231 return;
232
233 cmdinfo = scsi_cmd_priv(cmnd);
234
235 if (cmdinfo->state & SUBMIT_CMD_URB)
236 usb_free_urb(cmdinfo->cmd_urb);
237
238 /* data urbs may have never gotten their submit flag set */
239 if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT))
240 usb_free_urb(cmdinfo->data_in_urb);
241 if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT))
242 usb_free_urb(cmdinfo->data_out_urb);
243 }
244
uas_try_complete(struct scsi_cmnd * cmnd,const char * caller)245 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
246 {
247 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
248 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
249
250 lockdep_assert_held(&devinfo->lock);
251 if (cmdinfo->state & (COMMAND_INFLIGHT |
252 DATA_IN_URB_INFLIGHT |
253 DATA_OUT_URB_INFLIGHT |
254 COMMAND_ABORTED))
255 return -EBUSY;
256 devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
257 uas_free_unsubmitted_urbs(cmnd);
258 scsi_done(cmnd);
259 return 0;
260 }
261
uas_xfer_data(struct urb * urb,struct scsi_cmnd * cmnd,unsigned direction)262 static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
263 unsigned direction)
264 {
265 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
266 int err;
267
268 cmdinfo->state |= direction | SUBMIT_STATUS_URB;
269 err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
270 if (err) {
271 uas_add_work(cmnd);
272 }
273 }
274
uas_evaluate_response_iu(struct response_iu * riu,struct scsi_cmnd * cmnd)275 static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *cmnd)
276 {
277 u8 response_code = riu->response_code;
278
279 switch (response_code) {
280 case RC_INCORRECT_LUN:
281 set_host_byte(cmnd, DID_BAD_TARGET);
282 break;
283 case RC_TMF_SUCCEEDED:
284 set_host_byte(cmnd, DID_OK);
285 break;
286 case RC_TMF_NOT_SUPPORTED:
287 set_host_byte(cmnd, DID_BAD_TARGET);
288 break;
289 default:
290 uas_log_cmd_state(cmnd, "response iu", response_code);
291 set_host_byte(cmnd, DID_ERROR);
292 break;
293 }
294
295 return response_code == RC_TMF_SUCCEEDED;
296 }
297
uas_stat_cmplt(struct urb * urb)298 static void uas_stat_cmplt(struct urb *urb)
299 {
300 struct iu *iu = urb->transfer_buffer;
301 struct Scsi_Host *shost = urb->context;
302 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
303 struct urb *data_in_urb = NULL;
304 struct urb *data_out_urb = NULL;
305 struct scsi_cmnd *cmnd;
306 struct uas_cmd_info *cmdinfo;
307 unsigned long flags;
308 unsigned int idx;
309 int status = urb->status;
310 bool success;
311
312 spin_lock_irqsave(&devinfo->lock, flags);
313
314 if (devinfo->resetting)
315 goto out;
316
317 if (status) {
318 if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
319 dev_err(&urb->dev->dev, "stat urb: status %d\n", status);
320 goto out;
321 }
322
323 idx = be16_to_cpup(&iu->tag) - 1;
324 if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) {
325 dev_err(&urb->dev->dev,
326 "stat urb: no pending cmd for uas-tag %d\n", idx + 1);
327 goto out;
328 }
329
330 cmnd = devinfo->cmnd[idx];
331 cmdinfo = scsi_cmd_priv(cmnd);
332
333 if (!(cmdinfo->state & COMMAND_INFLIGHT)) {
334 uas_log_cmd_state(cmnd, "unexpected status cmplt", 0);
335 goto out;
336 }
337
338 switch (iu->iu_id) {
339 case IU_ID_STATUS:
340 uas_sense(urb, cmnd);
341 if (cmnd->result != 0) {
342 /* cancel data transfers on error */
343 data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
344 data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
345 }
346 cmdinfo->state &= ~COMMAND_INFLIGHT;
347 uas_try_complete(cmnd, __func__);
348 break;
349 case IU_ID_READ_READY:
350 if (!cmdinfo->data_in_urb ||
351 (cmdinfo->state & DATA_IN_URB_INFLIGHT)) {
352 uas_log_cmd_state(cmnd, "unexpected read rdy", 0);
353 break;
354 }
355 uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
356 break;
357 case IU_ID_WRITE_READY:
358 if (!cmdinfo->data_out_urb ||
359 (cmdinfo->state & DATA_OUT_URB_INFLIGHT)) {
360 uas_log_cmd_state(cmnd, "unexpected write rdy", 0);
361 break;
362 }
363 uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
364 break;
365 case IU_ID_RESPONSE:
366 cmdinfo->state &= ~COMMAND_INFLIGHT;
367 success = uas_evaluate_response_iu((struct response_iu *)iu, cmnd);
368 if (!success) {
369 /* Error, cancel data transfers */
370 data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
371 data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
372 }
373 uas_try_complete(cmnd, __func__);
374 break;
375 default:
376 uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id);
377 }
378 out:
379 usb_free_urb(urb);
380 spin_unlock_irqrestore(&devinfo->lock, flags);
381
382 /* Unlinking of data urbs must be done without holding the lock */
383 if (data_in_urb) {
384 usb_unlink_urb(data_in_urb);
385 usb_put_urb(data_in_urb);
386 }
387 if (data_out_urb) {
388 usb_unlink_urb(data_out_urb);
389 usb_put_urb(data_out_urb);
390 }
391 }
392
uas_data_cmplt(struct urb * urb)393 static void uas_data_cmplt(struct urb *urb)
394 {
395 struct scsi_cmnd *cmnd = urb->context;
396 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
397 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
398 struct scsi_data_buffer *sdb = &cmnd->sdb;
399 unsigned long flags;
400 int status = urb->status;
401
402 spin_lock_irqsave(&devinfo->lock, flags);
403
404 if (cmdinfo->data_in_urb == urb) {
405 cmdinfo->state &= ~DATA_IN_URB_INFLIGHT;
406 cmdinfo->data_in_urb = NULL;
407 } else if (cmdinfo->data_out_urb == urb) {
408 cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT;
409 cmdinfo->data_out_urb = NULL;
410 }
411
412 if (devinfo->resetting)
413 goto out;
414
415 /* Data urbs should not complete before the cmd urb is submitted */
416 if (cmdinfo->state & SUBMIT_CMD_URB) {
417 uas_log_cmd_state(cmnd, "unexpected data cmplt", 0);
418 goto out;
419 }
420
421 if (status) {
422 if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN)
423 uas_log_cmd_state(cmnd, "data cmplt err", status);
424 /* error: no data transfered */
425 scsi_set_resid(cmnd, sdb->length);
426 set_host_byte(cmnd, DID_ERROR);
427 } else {
428 scsi_set_resid(cmnd, sdb->length - urb->actual_length);
429 }
430 uas_try_complete(cmnd, __func__);
431 out:
432 usb_free_urb(urb);
433 spin_unlock_irqrestore(&devinfo->lock, flags);
434 }
435
uas_cmd_cmplt(struct urb * urb)436 static void uas_cmd_cmplt(struct urb *urb)
437 {
438 if (urb->status)
439 dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status);
440
441 usb_free_urb(urb);
442 }
443
uas_alloc_data_urb(struct uas_dev_info * devinfo,gfp_t gfp,struct scsi_cmnd * cmnd,enum dma_data_direction dir)444 static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
445 struct scsi_cmnd *cmnd,
446 enum dma_data_direction dir)
447 {
448 struct usb_device *udev = devinfo->udev;
449 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
450 struct urb *urb = usb_alloc_urb(0, gfp);
451 struct scsi_data_buffer *sdb = &cmnd->sdb;
452 unsigned int pipe = (dir == DMA_FROM_DEVICE)
453 ? devinfo->data_in_pipe : devinfo->data_out_pipe;
454
455 if (!urb)
456 goto out;
457 usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
458 uas_data_cmplt, cmnd);
459 if (devinfo->use_streams)
460 urb->stream_id = cmdinfo->uas_tag;
461 urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
462 urb->sg = sdb->table.sgl;
463 out:
464 return urb;
465 }
466
uas_alloc_sense_urb(struct uas_dev_info * devinfo,gfp_t gfp,struct scsi_cmnd * cmnd)467 static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
468 struct scsi_cmnd *cmnd)
469 {
470 struct usb_device *udev = devinfo->udev;
471 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
472 struct urb *urb = usb_alloc_urb(0, gfp);
473 struct sense_iu *iu;
474
475 if (!urb)
476 goto out;
477
478 iu = kzalloc(sizeof(*iu), gfp);
479 if (!iu)
480 goto free;
481
482 usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
483 uas_stat_cmplt, cmnd->device->host);
484 if (devinfo->use_streams)
485 urb->stream_id = cmdinfo->uas_tag;
486 urb->transfer_flags |= URB_FREE_BUFFER;
487 out:
488 return urb;
489 free:
490 usb_free_urb(urb);
491 return NULL;
492 }
493
uas_alloc_cmd_urb(struct uas_dev_info * devinfo,gfp_t gfp,struct scsi_cmnd * cmnd)494 static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
495 struct scsi_cmnd *cmnd)
496 {
497 struct usb_device *udev = devinfo->udev;
498 struct scsi_device *sdev = cmnd->device;
499 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
500 struct urb *urb = usb_alloc_urb(0, gfp);
501 struct command_iu *iu;
502 int len;
503
504 if (!urb)
505 goto out;
506
507 len = cmnd->cmd_len - 16;
508 if (len < 0)
509 len = 0;
510 len = ALIGN(len, 4);
511 iu = kzalloc(sizeof(*iu) + len, gfp);
512 if (!iu)
513 goto free;
514
515 iu->iu_id = IU_ID_COMMAND;
516 iu->tag = cpu_to_be16(cmdinfo->uas_tag);
517 iu->prio_attr = UAS_SIMPLE_TAG;
518 iu->len = len;
519 int_to_scsilun(sdev->lun, &iu->lun);
520 memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
521
522 usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
523 uas_cmd_cmplt, NULL);
524 urb->transfer_flags |= URB_FREE_BUFFER;
525 out:
526 return urb;
527 free:
528 usb_free_urb(urb);
529 return NULL;
530 }
531
532 /*
533 * Why should I request the Status IU before sending the Command IU? Spec
534 * says to, but also says the device may receive them in any order. Seems
535 * daft to me.
536 */
537
uas_submit_sense_urb(struct scsi_cmnd * cmnd,gfp_t gfp)538 static int uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
539 {
540 struct uas_dev_info *devinfo = cmnd->device->hostdata;
541 struct urb *urb;
542 int err;
543
544 urb = uas_alloc_sense_urb(devinfo, gfp, cmnd);
545 if (!urb)
546 return -ENOMEM;
547 usb_anchor_urb(urb, &devinfo->sense_urbs);
548 err = usb_submit_urb(urb, gfp);
549 if (err) {
550 usb_unanchor_urb(urb);
551 uas_log_cmd_state(cmnd, "sense submit err", err);
552 usb_free_urb(urb);
553 }
554 return err;
555 }
556
uas_submit_urbs(struct scsi_cmnd * cmnd,struct uas_dev_info * devinfo)557 static int uas_submit_urbs(struct scsi_cmnd *cmnd,
558 struct uas_dev_info *devinfo)
559 {
560 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
561 int err;
562
563 lockdep_assert_held(&devinfo->lock);
564 if (cmdinfo->state & SUBMIT_STATUS_URB) {
565 err = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
566 if (err)
567 return err;
568 cmdinfo->state &= ~SUBMIT_STATUS_URB;
569 }
570
571 if (cmdinfo->state & ALLOC_DATA_IN_URB) {
572 cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
573 cmnd, DMA_FROM_DEVICE);
574 if (!cmdinfo->data_in_urb)
575 return -ENOMEM;
576 cmdinfo->state &= ~ALLOC_DATA_IN_URB;
577 }
578
579 if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
580 usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
581 err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC);
582 if (err) {
583 usb_unanchor_urb(cmdinfo->data_in_urb);
584 uas_log_cmd_state(cmnd, "data in submit err", err);
585 return err;
586 }
587 cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
588 cmdinfo->state |= DATA_IN_URB_INFLIGHT;
589 }
590
591 if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
592 cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
593 cmnd, DMA_TO_DEVICE);
594 if (!cmdinfo->data_out_urb)
595 return -ENOMEM;
596 cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
597 }
598
599 if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
600 usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
601 err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC);
602 if (err) {
603 usb_unanchor_urb(cmdinfo->data_out_urb);
604 uas_log_cmd_state(cmnd, "data out submit err", err);
605 return err;
606 }
607 cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
608 cmdinfo->state |= DATA_OUT_URB_INFLIGHT;
609 }
610
611 if (cmdinfo->state & ALLOC_CMD_URB) {
612 cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd);
613 if (!cmdinfo->cmd_urb)
614 return -ENOMEM;
615 cmdinfo->state &= ~ALLOC_CMD_URB;
616 }
617
618 if (cmdinfo->state & SUBMIT_CMD_URB) {
619 usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
620 err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC);
621 if (err) {
622 usb_unanchor_urb(cmdinfo->cmd_urb);
623 uas_log_cmd_state(cmnd, "cmd submit err", err);
624 return err;
625 }
626 cmdinfo->cmd_urb = NULL;
627 cmdinfo->state &= ~SUBMIT_CMD_URB;
628 cmdinfo->state |= COMMAND_INFLIGHT;
629 }
630
631 return 0;
632 }
633
uas_queuecommand_lck(struct scsi_cmnd * cmnd)634 static int uas_queuecommand_lck(struct scsi_cmnd *cmnd)
635 {
636 struct scsi_device *sdev = cmnd->device;
637 struct uas_dev_info *devinfo = sdev->hostdata;
638 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
639 unsigned long flags;
640 int idx, err;
641
642 /* Re-check scsi_block_requests now that we've the host-lock */
643 if (cmnd->device->host->host_self_blocked)
644 return SCSI_MLQUEUE_DEVICE_BUSY;
645
646 if ((devinfo->flags & US_FL_NO_ATA_1X) &&
647 (cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) {
648 memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB,
649 sizeof(usb_stor_sense_invalidCDB));
650 cmnd->result = SAM_STAT_CHECK_CONDITION;
651 scsi_done(cmnd);
652 return 0;
653 }
654
655 spin_lock_irqsave(&devinfo->lock, flags);
656
657 if (devinfo->resetting) {
658 set_host_byte(cmnd, DID_ERROR);
659 scsi_done(cmnd);
660 goto zombie;
661 }
662
663 /* Find a free uas-tag */
664 for (idx = 0; idx < devinfo->qdepth; idx++) {
665 if (!devinfo->cmnd[idx])
666 break;
667 }
668 if (idx == devinfo->qdepth) {
669 spin_unlock_irqrestore(&devinfo->lock, flags);
670 return SCSI_MLQUEUE_DEVICE_BUSY;
671 }
672
673 memset(cmdinfo, 0, sizeof(*cmdinfo));
674 cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */
675 cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB;
676
677 switch (cmnd->sc_data_direction) {
678 case DMA_FROM_DEVICE:
679 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
680 break;
681 case DMA_BIDIRECTIONAL:
682 cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB;
683 fallthrough;
684 case DMA_TO_DEVICE:
685 cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB;
686 break;
687 case DMA_NONE:
688 break;
689 }
690
691 if (!devinfo->use_streams)
692 cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
693
694 err = uas_submit_urbs(cmnd, devinfo);
695 /*
696 * in case of fatal errors the SCSI layer is peculiar
697 * a command that has finished is a success for the purpose
698 * of queueing, no matter how fatal the error
699 */
700 if (err == -ENODEV) {
701 if (cmdinfo->state & (COMMAND_INFLIGHT | DATA_IN_URB_INFLIGHT |
702 DATA_OUT_URB_INFLIGHT))
703 goto out;
704
705 set_host_byte(cmnd, DID_NO_CONNECT);
706 scsi_done(cmnd);
707 goto zombie;
708 }
709 if (err) {
710 /* If we did nothing, give up now */
711 if (cmdinfo->state & SUBMIT_STATUS_URB) {
712 spin_unlock_irqrestore(&devinfo->lock, flags);
713 return SCSI_MLQUEUE_DEVICE_BUSY;
714 }
715 uas_add_work(cmnd);
716 }
717
718 out:
719 devinfo->cmnd[idx] = cmnd;
720 zombie:
721 spin_unlock_irqrestore(&devinfo->lock, flags);
722 return 0;
723 }
724
DEF_SCSI_QCMD(uas_queuecommand)725 static DEF_SCSI_QCMD(uas_queuecommand)
726
727 /*
728 * For now we do not support actually sending an abort to the device, so
729 * this eh always fails. Still we must define it to make sure that we've
730 * dropped all references to the cmnd in question once this function exits.
731 */
732 static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
733 {
734 struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
735 struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
736 struct urb *data_in_urb = NULL;
737 struct urb *data_out_urb = NULL;
738 unsigned long flags;
739
740 spin_lock_irqsave(&devinfo->lock, flags);
741
742 uas_log_cmd_state(cmnd, __func__, 0);
743
744 /* Ensure that try_complete does not call scsi_done */
745 cmdinfo->state |= COMMAND_ABORTED;
746
747 /* Drop all refs to this cmnd, kill data urbs to break their ref */
748 devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL;
749 if (cmdinfo->state & DATA_IN_URB_INFLIGHT)
750 data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
751 if (cmdinfo->state & DATA_OUT_URB_INFLIGHT)
752 data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
753
754 uas_free_unsubmitted_urbs(cmnd);
755
756 spin_unlock_irqrestore(&devinfo->lock, flags);
757
758 if (data_in_urb) {
759 usb_kill_urb(data_in_urb);
760 usb_put_urb(data_in_urb);
761 }
762 if (data_out_urb) {
763 usb_kill_urb(data_out_urb);
764 usb_put_urb(data_out_urb);
765 }
766
767 return FAILED;
768 }
769
uas_eh_device_reset_handler(struct scsi_cmnd * cmnd)770 static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
771 {
772 struct scsi_device *sdev = cmnd->device;
773 struct uas_dev_info *devinfo = sdev->hostdata;
774 struct usb_device *udev = devinfo->udev;
775 unsigned long flags;
776 int err;
777
778 err = usb_lock_device_for_reset(udev, devinfo->intf);
779 if (err) {
780 shost_printk(KERN_ERR, sdev->host,
781 "%s FAILED to get lock err %d\n", __func__, err);
782 return FAILED;
783 }
784
785 shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__);
786
787 spin_lock_irqsave(&devinfo->lock, flags);
788 devinfo->resetting = 1;
789 spin_unlock_irqrestore(&devinfo->lock, flags);
790
791 usb_kill_anchored_urbs(&devinfo->cmd_urbs);
792 usb_kill_anchored_urbs(&devinfo->sense_urbs);
793 usb_kill_anchored_urbs(&devinfo->data_urbs);
794 uas_zap_pending(devinfo, DID_RESET);
795
796 err = usb_reset_device(udev);
797
798 spin_lock_irqsave(&devinfo->lock, flags);
799 devinfo->resetting = 0;
800 spin_unlock_irqrestore(&devinfo->lock, flags);
801
802 usb_unlock_device(udev);
803
804 if (err) {
805 shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n",
806 __func__, err);
807 return FAILED;
808 }
809
810 shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__);
811 return SUCCESS;
812 }
813
uas_target_alloc(struct scsi_target * starget)814 static int uas_target_alloc(struct scsi_target *starget)
815 {
816 struct uas_dev_info *devinfo = (struct uas_dev_info *)
817 dev_to_shost(starget->dev.parent)->hostdata;
818
819 if (devinfo->flags & US_FL_NO_REPORT_LUNS)
820 starget->no_report_luns = 1;
821
822 return 0;
823 }
824
uas_sdev_init(struct scsi_device * sdev)825 static int uas_sdev_init(struct scsi_device *sdev)
826 {
827 struct uas_dev_info *devinfo =
828 (struct uas_dev_info *)sdev->host->hostdata;
829
830 /*
831 * Some USB storage devices reset if the IO advice hints grouping mode
832 * page is queried. Hence skip that mode page.
833 */
834 sdev->sdev_bflags |= BLIST_SKIP_IO_HINTS;
835
836 sdev->hostdata = devinfo;
837 return 0;
838 }
839
uas_sdev_configure(struct scsi_device * sdev,struct queue_limits * lim)840 static int uas_sdev_configure(struct scsi_device *sdev,
841 struct queue_limits *lim)
842 {
843 struct uas_dev_info *devinfo = sdev->hostdata;
844
845 if (devinfo->flags & US_FL_MAX_SECTORS_64)
846 lim->max_hw_sectors = 64;
847 else if (devinfo->flags & US_FL_MAX_SECTORS_240)
848 lim->max_hw_sectors = 240;
849
850 if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
851 sdev->no_report_opcodes = 1;
852
853 /* A few buggy USB-ATA bridges don't understand FUA */
854 if (devinfo->flags & US_FL_BROKEN_FUA)
855 sdev->broken_fua = 1;
856
857 /* UAS also needs to support FL_ALWAYS_SYNC */
858 if (devinfo->flags & US_FL_ALWAYS_SYNC) {
859 sdev->skip_ms_page_3f = 1;
860 sdev->skip_ms_page_8 = 1;
861 sdev->wce_default_on = 1;
862 }
863
864 /* Some disks cannot handle READ_CAPACITY_16 */
865 if (devinfo->flags & US_FL_NO_READ_CAPACITY_16)
866 sdev->no_read_capacity_16 = 1;
867
868 /* Some disks cannot handle WRITE_SAME */
869 if (devinfo->flags & US_FL_NO_SAME)
870 sdev->no_write_same = 1;
871 /*
872 * Some disks return the total number of blocks in response
873 * to READ CAPACITY rather than the highest block number.
874 * If this device makes that mistake, tell the sd driver.
875 */
876 if (devinfo->flags & US_FL_FIX_CAPACITY)
877 sdev->fix_capacity = 1;
878
879 /*
880 * in some cases we have to guess
881 */
882 if (devinfo->flags & US_FL_CAPACITY_HEURISTICS)
883 sdev->guess_capacity = 1;
884
885 /*
886 * Some devices report generic values until the media has been
887 * accessed. Force a READ(10) prior to querying device
888 * characteristics.
889 */
890 sdev->read_before_ms = 1;
891
892 /*
893 * Some devices don't like MODE SENSE with page=0x3f,
894 * which is the command used for checking if a device
895 * is write-protected. Now that we tell the sd driver
896 * to do a 192-byte transfer with this command the
897 * majority of devices work fine, but a few still can't
898 * handle it. The sd driver will simply assume those
899 * devices are write-enabled.
900 */
901 if (devinfo->flags & US_FL_NO_WP_DETECT)
902 sdev->skip_ms_page_3f = 1;
903
904 scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
905 return 0;
906 }
907
908 static const struct scsi_host_template uas_host_template = {
909 .module = THIS_MODULE,
910 .name = "uas",
911 .queuecommand = uas_queuecommand,
912 .target_alloc = uas_target_alloc,
913 .sdev_init = uas_sdev_init,
914 .sdev_configure = uas_sdev_configure,
915 .eh_abort_handler = uas_eh_abort_handler,
916 .eh_device_reset_handler = uas_eh_device_reset_handler,
917 .this_id = -1,
918 .skip_settle_delay = 1,
919 /*
920 * The protocol has no requirements on alignment in the strict sense.
921 * Controllers may or may not have alignment restrictions.
922 * As this is not exported, we use an extremely conservative guess.
923 */
924 .dma_alignment = 511,
925 .dma_boundary = PAGE_SIZE - 1,
926 .cmd_size = sizeof(struct uas_cmd_info),
927 };
928
929 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
930 vendorName, productName, useProtocol, useTransport, \
931 initFunction, flags) \
932 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
933 .driver_info = (flags) }
934
935 static const struct usb_device_id uas_usb_ids[] = {
936 # include "unusual_uas.h"
937 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
938 { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
939 { }
940 };
941 MODULE_DEVICE_TABLE(usb, uas_usb_ids);
942
943 #undef UNUSUAL_DEV
944
uas_switch_interface(struct usb_device * udev,struct usb_interface * intf)945 static int uas_switch_interface(struct usb_device *udev,
946 struct usb_interface *intf)
947 {
948 struct usb_host_interface *alt;
949
950 alt = uas_find_uas_alt_setting(intf);
951 if (!alt)
952 return -ENODEV;
953
954 return usb_set_interface(udev, alt->desc.bInterfaceNumber,
955 alt->desc.bAlternateSetting);
956 }
957
uas_configure_endpoints(struct uas_dev_info * devinfo)958 static int uas_configure_endpoints(struct uas_dev_info *devinfo)
959 {
960 struct usb_host_endpoint *eps[4] = { };
961 struct usb_device *udev = devinfo->udev;
962 int r;
963
964 r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps);
965 if (r)
966 return r;
967
968 devinfo->cmd_pipe = usb_sndbulkpipe(udev,
969 usb_endpoint_num(&eps[0]->desc));
970 devinfo->status_pipe = usb_rcvbulkpipe(udev,
971 usb_endpoint_num(&eps[1]->desc));
972 devinfo->data_in_pipe = usb_rcvbulkpipe(udev,
973 usb_endpoint_num(&eps[2]->desc));
974 devinfo->data_out_pipe = usb_sndbulkpipe(udev,
975 usb_endpoint_num(&eps[3]->desc));
976
977 if (udev->speed < USB_SPEED_SUPER) {
978 devinfo->qdepth = 32;
979 devinfo->use_streams = 0;
980 } else {
981 devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
982 3, MAX_CMNDS, GFP_NOIO);
983 if (devinfo->qdepth < 0)
984 return devinfo->qdepth;
985 devinfo->use_streams = 1;
986 }
987
988 return 0;
989 }
990
uas_free_streams(struct uas_dev_info * devinfo)991 static void uas_free_streams(struct uas_dev_info *devinfo)
992 {
993 struct usb_device *udev = devinfo->udev;
994 struct usb_host_endpoint *eps[3];
995
996 eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe);
997 eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe);
998 eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe);
999 usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO);
1000 }
1001
uas_probe(struct usb_interface * intf,const struct usb_device_id * id)1002 static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
1003 {
1004 int result = -ENOMEM;
1005 struct Scsi_Host *shost = NULL;
1006 struct uas_dev_info *devinfo;
1007 struct usb_device *udev = interface_to_usbdev(intf);
1008 u64 dev_flags;
1009
1010 if (!uas_use_uas_driver(intf, id, &dev_flags))
1011 return -ENODEV;
1012
1013 if (uas_switch_interface(udev, intf))
1014 return -ENODEV;
1015
1016 shost = scsi_host_alloc(&uas_host_template,
1017 sizeof(struct uas_dev_info));
1018 if (!shost)
1019 goto set_alt0;
1020
1021 shost->max_cmd_len = 16 + 252;
1022 shost->max_id = 1;
1023 shost->max_lun = 256;
1024 shost->max_channel = 0;
1025 shost->sg_tablesize = udev->bus->sg_tablesize;
1026
1027 devinfo = (struct uas_dev_info *)shost->hostdata;
1028 devinfo->intf = intf;
1029 devinfo->udev = udev;
1030 devinfo->resetting = 0;
1031 devinfo->shutdown = 0;
1032 devinfo->flags = dev_flags;
1033 init_usb_anchor(&devinfo->cmd_urbs);
1034 init_usb_anchor(&devinfo->sense_urbs);
1035 init_usb_anchor(&devinfo->data_urbs);
1036 spin_lock_init(&devinfo->lock);
1037 INIT_WORK(&devinfo->work, uas_do_work);
1038 INIT_WORK(&devinfo->scan_work, uas_scan_work);
1039
1040 result = uas_configure_endpoints(devinfo);
1041 if (result)
1042 goto set_alt0;
1043
1044 /*
1045 * 1 tag is reserved for untagged commands +
1046 * 1 tag to avoid off by one errors in some bridge firmwares
1047 */
1048 shost->can_queue = devinfo->qdepth - 2;
1049
1050 usb_set_intfdata(intf, shost);
1051 result = scsi_add_host(shost, &intf->dev);
1052 if (result)
1053 goto free_streams;
1054
1055 /* Submit the delayed_work for SCSI-device scanning */
1056 schedule_work(&devinfo->scan_work);
1057
1058 return result;
1059
1060 free_streams:
1061 uas_free_streams(devinfo);
1062 usb_set_intfdata(intf, NULL);
1063 set_alt0:
1064 usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1065 if (shost)
1066 scsi_host_put(shost);
1067 return result;
1068 }
1069
uas_cmnd_list_empty(struct uas_dev_info * devinfo)1070 static int uas_cmnd_list_empty(struct uas_dev_info *devinfo)
1071 {
1072 unsigned long flags;
1073 int i, r = 1;
1074
1075 spin_lock_irqsave(&devinfo->lock, flags);
1076
1077 for (i = 0; i < devinfo->qdepth; i++) {
1078 if (devinfo->cmnd[i]) {
1079 r = 0; /* Not empty */
1080 break;
1081 }
1082 }
1083
1084 spin_unlock_irqrestore(&devinfo->lock, flags);
1085
1086 return r;
1087 }
1088
1089 /*
1090 * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily
1091 * get empty while there still is more work to do due to sense-urbs completing
1092 * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty.
1093 */
uas_wait_for_pending_cmnds(struct uas_dev_info * devinfo)1094 static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo)
1095 {
1096 unsigned long start_time;
1097 int r;
1098
1099 start_time = jiffies;
1100 do {
1101 flush_work(&devinfo->work);
1102
1103 r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000);
1104 if (r == 0)
1105 return -ETIME;
1106
1107 r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500);
1108 if (r == 0)
1109 return -ETIME;
1110
1111 if (time_after(jiffies, start_time + 5 * HZ))
1112 return -ETIME;
1113 } while (!uas_cmnd_list_empty(devinfo));
1114
1115 return 0;
1116 }
1117
uas_pre_reset(struct usb_interface * intf)1118 static int uas_pre_reset(struct usb_interface *intf)
1119 {
1120 struct Scsi_Host *shost = usb_get_intfdata(intf);
1121 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1122 unsigned long flags;
1123
1124 if (devinfo->shutdown)
1125 return 0;
1126
1127 /* Block new requests */
1128 spin_lock_irqsave(shost->host_lock, flags);
1129 scsi_block_requests(shost);
1130 spin_unlock_irqrestore(shost->host_lock, flags);
1131
1132 if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1133 shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1134 scsi_unblock_requests(shost);
1135 return 1;
1136 }
1137
1138 uas_free_streams(devinfo);
1139
1140 return 0;
1141 }
1142
uas_post_reset(struct usb_interface * intf)1143 static int uas_post_reset(struct usb_interface *intf)
1144 {
1145 struct Scsi_Host *shost = usb_get_intfdata(intf);
1146 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1147 unsigned long flags;
1148 int err;
1149
1150 if (devinfo->shutdown)
1151 return 0;
1152
1153 err = uas_configure_endpoints(devinfo);
1154 if (err && err != -ENODEV)
1155 shost_printk(KERN_ERR, shost,
1156 "%s: alloc streams error %d after reset",
1157 __func__, err);
1158
1159 /* we must unblock the host in every case lest we deadlock */
1160 spin_lock_irqsave(shost->host_lock, flags);
1161 scsi_report_bus_reset(shost, 0);
1162 spin_unlock_irqrestore(shost->host_lock, flags);
1163
1164 scsi_unblock_requests(shost);
1165
1166 return err ? 1 : 0;
1167 }
1168
uas_suspend(struct usb_interface * intf,pm_message_t message)1169 static int uas_suspend(struct usb_interface *intf, pm_message_t message)
1170 {
1171 struct Scsi_Host *shost = usb_get_intfdata(intf);
1172 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1173
1174 if (uas_wait_for_pending_cmnds(devinfo) != 0) {
1175 shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
1176 return -ETIME;
1177 }
1178
1179 return 0;
1180 }
1181
uas_resume(struct usb_interface * intf)1182 static int uas_resume(struct usb_interface *intf)
1183 {
1184 return 0;
1185 }
1186
uas_reset_resume(struct usb_interface * intf)1187 static int uas_reset_resume(struct usb_interface *intf)
1188 {
1189 struct Scsi_Host *shost = usb_get_intfdata(intf);
1190 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1191 unsigned long flags;
1192 int err;
1193
1194 err = uas_configure_endpoints(devinfo);
1195 if (err) {
1196 shost_printk(KERN_ERR, shost,
1197 "%s: alloc streams error %d after reset",
1198 __func__, err);
1199 return -EIO;
1200 }
1201
1202 spin_lock_irqsave(shost->host_lock, flags);
1203 scsi_report_bus_reset(shost, 0);
1204 spin_unlock_irqrestore(shost->host_lock, flags);
1205
1206 return 0;
1207 }
1208
uas_disconnect(struct usb_interface * intf)1209 static void uas_disconnect(struct usb_interface *intf)
1210 {
1211 struct Scsi_Host *shost = usb_get_intfdata(intf);
1212 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1213 unsigned long flags;
1214
1215 spin_lock_irqsave(&devinfo->lock, flags);
1216 devinfo->resetting = 1;
1217 spin_unlock_irqrestore(&devinfo->lock, flags);
1218
1219 cancel_work_sync(&devinfo->work);
1220 usb_kill_anchored_urbs(&devinfo->cmd_urbs);
1221 usb_kill_anchored_urbs(&devinfo->sense_urbs);
1222 usb_kill_anchored_urbs(&devinfo->data_urbs);
1223 uas_zap_pending(devinfo, DID_NO_CONNECT);
1224
1225 /*
1226 * Prevent SCSI scanning (if it hasn't started yet)
1227 * or wait for the SCSI-scanning routine to stop.
1228 */
1229 cancel_work_sync(&devinfo->scan_work);
1230
1231 scsi_remove_host(shost);
1232 uas_free_streams(devinfo);
1233 scsi_host_put(shost);
1234 }
1235
1236 /*
1237 * Put the device back in usb-storage mode on shutdown, as some BIOS-es
1238 * hang on reboot when the device is still in uas mode. Note the reset is
1239 * necessary as some devices won't revert to usb-storage mode without it.
1240 */
uas_shutdown(struct usb_interface * intf)1241 static void uas_shutdown(struct usb_interface *intf)
1242 {
1243 struct usb_device *udev = interface_to_usbdev(intf);
1244 struct Scsi_Host *shost = usb_get_intfdata(intf);
1245 struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
1246
1247 if (system_state != SYSTEM_RESTART)
1248 return;
1249
1250 devinfo->shutdown = 1;
1251 uas_free_streams(devinfo);
1252 usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
1253 usb_reset_device(udev);
1254 }
1255
1256 static struct usb_driver uas_driver = {
1257 .name = "uas",
1258 .probe = uas_probe,
1259 .disconnect = uas_disconnect,
1260 .pre_reset = uas_pre_reset,
1261 .post_reset = uas_post_reset,
1262 .suspend = uas_suspend,
1263 .resume = uas_resume,
1264 .reset_resume = uas_reset_resume,
1265 .shutdown = uas_shutdown,
1266 .id_table = uas_usb_ids,
1267 };
1268
uas_init(void)1269 static int __init uas_init(void)
1270 {
1271 int rv;
1272
1273 workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM, 0);
1274 if (!workqueue)
1275 return -ENOMEM;
1276
1277 rv = usb_register(&uas_driver);
1278 if (rv) {
1279 destroy_workqueue(workqueue);
1280 return -ENOMEM;
1281 }
1282
1283 return 0;
1284 }
1285
uas_exit(void)1286 static void __exit uas_exit(void)
1287 {
1288 usb_deregister(&uas_driver);
1289 destroy_workqueue(workqueue);
1290 }
1291
1292 module_init(uas_init);
1293 module_exit(uas_exit);
1294
1295 MODULE_DESCRIPTION("USB Attached SCSI driver");
1296 MODULE_LICENSE("GPL");
1297 MODULE_IMPORT_NS("USB_STORAGE");
1298 MODULE_AUTHOR(
1299 "Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp");
1300