1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Copyright(c) 2020 Intel Corporation 4 * 5 * Author: Cezary Rojewski <cezary.rojewski@intel.com> 6 */ 7 8 #ifndef __SND_SOC_INTEL_CATPT_REGS_H 9 #define __SND_SOC_INTEL_CATPT_REGS_H 10 11 #include <linux/bitops.h> 12 #include <linux/iopoll.h> 13 #include <uapi/linux/pci_regs.h> 14 15 #define CATPT_SHIM_REGS_SIZE 4096 16 #define CATPT_DMA_REGS_SIZE 1024 17 #define CATPT_DMA_COUNT 2 18 #define CATPT_SSP_REGS_SIZE 512 19 20 /* DSP Shim registers */ 21 22 #define CATPT_SHIM_CS1 0x00 23 #define CATPT_SHIM_ISC 0x18 24 #define CATPT_SHIM_ISD 0x20 25 #define CATPT_SHIM_IMC 0x28 26 #define CATPT_SHIM_IMD 0x30 27 #define CATPT_SHIM_IPCC 0x38 28 #define CATPT_SHIM_IPCD 0x40 29 #define CATPT_SHIM_CLKCTL 0x78 30 #define CATPT_SHIM_CS2 0x80 31 #define CATPT_SHIM_LTRC 0xE0 32 #define CATPT_SHIM_HMDC 0xE8 33 34 #define CATPT_CS_LPCS BIT(31) 35 #define CATPT_CS_SFCR(ssp) BIT(27 + (ssp)) 36 #define CATPT_CS_S1IOCS BIT(23) 37 #define CATPT_CS_S0IOCS BIT(21) 38 #define CATPT_CS_PCE BIT(15) 39 #define CATPT_CS_SDPM(ssp) BIT(11 + (ssp)) 40 #define CATPT_CS_STALL BIT(10) 41 #define CATPT_CS_DCS GENMASK(6, 4) 42 /* b100 DSP core & audio fabric high clock */ 43 #define CATPT_CS_DCS_HIGH (0x4 << 4) 44 #define CATPT_CS_SBCS(ssp) BIT(2 + (ssp)) 45 #define CATPT_CS_RST BIT(1) 46 47 #define CATPT_ISC_IPCDB BIT(1) 48 #define CATPT_ISC_IPCCD BIT(0) 49 #define CATPT_ISD_DCPWM BIT(31) 50 #define CATPT_ISD_IPCCB BIT(1) 51 #define CATPT_ISD_IPCDD BIT(0) 52 53 #define CATPT_IMC_IPCDB BIT(1) 54 #define CATPT_IMC_IPCCD BIT(0) 55 #define CATPT_IMD_IPCCB BIT(1) 56 #define CATPT_IMD_IPCDD BIT(0) 57 58 #define CATPT_IPCC_BUSY BIT(31) 59 #define CATPT_IPCC_DONE BIT(30) 60 #define CATPT_IPCD_BUSY BIT(31) 61 #define CATPT_IPCD_DONE BIT(30) 62 63 #define CATPT_CLKCTL_CFCIP BIT(31) 64 #define CATPT_CLKCTL_SMOS GENMASK(25, 24) 65 66 #define CATPT_HMDC_HDDA(e, ch) BIT(8 * (e) + (ch)) 67 68 /* defaults to reset SHIM registers to after each power cycle */ 69 #define CATPT_CS_DEFAULT 0x8480040E 70 #define CATPT_ISC_DEFAULT 0x0 71 #define CATPT_ISD_DEFAULT 0x0 72 #define CATPT_IMC_DEFAULT 0x7FFF0003 73 #define CATPT_IMD_DEFAULT 0x7FFF0003 74 #define CATPT_IPCC_DEFAULT 0x0 75 #define CATPT_IPCD_DEFAULT 0x0 76 #define CATPT_CLKCTL_DEFAULT 0x7FF 77 #define CATPT_CS2_DEFAULT 0x0 78 #define CATPT_LTRC_DEFAULT 0x0 79 #define CATPT_HMDC_DEFAULT 0x0 80 81 /* PCI Configuration registers */ 82 83 #define CATPT_PCI_PMCAPID 0x80 84 #define CATPT_PCI_PMCS (CATPT_PCI_PMCAPID + PCI_PM_CTRL) 85 #define CATPT_PCI_VDRTCTL0 0xA0 86 #define CATPT_PCI_VDRTCTL2 0xA8 87 88 #define CATPT_VDRTCTL2_DTCGE BIT(10) 89 #define CATPT_VDRTCTL2_DCLCGE BIT(1) 90 #define CATPT_VDRTCTL2_CGEALL 0xF7F 91 92 /* LPT PCI Configuration bits */ 93 94 #define LPT_VDRTCTL0_DSRAMPGE(b) BIT(16 + (b)) 95 #define LPT_VDRTCTL0_DSRAMPGE_MASK GENMASK(31, 16) 96 #define LPT_VDRTCTL0_ISRAMPGE(b) BIT(6 + (b)) 97 #define LPT_VDRTCTL0_ISRAMPGE_MASK GENMASK(15, 6) 98 #define LPT_VDRTCTL0_D3SRAMPGD BIT(2) 99 #define LPT_VDRTCTL0_D3PGD BIT(1) 100 #define LPT_VDRTCTL0_APLLSE BIT(0) 101 102 /* WPT PCI Configuration bits */ 103 104 #define WPT_VDRTCTL0_DSRAMPGE(b) BIT(12 + (b)) 105 #define WPT_VDRTCTL0_DSRAMPGE_MASK GENMASK(31, 12) 106 #define WPT_VDRTCTL0_ISRAMPGE(b) BIT(2 + (b)) 107 #define WPT_VDRTCTL0_ISRAMPGE_MASK GENMASK(11, 2) 108 #define WPT_VDRTCTL0_D3SRAMPGD BIT(1) 109 #define WPT_VDRTCTL0_D3PGD BIT(0) 110 111 #define WPT_VDRTCTL2_APLLSE BIT(31) 112 113 /* defaults to reset SSP registers to after each power cycle */ 114 #define CATPT_SSC0_DEFAULT 0x0 115 #define CATPT_SSC1_DEFAULT 0x0 116 #define CATPT_SSS_DEFAULT 0xF004 117 #define CATPT_SSIT_DEFAULT 0x0 118 #define CATPT_SSD_DEFAULT 0xC43893A3 119 #define CATPT_SSTO_DEFAULT 0x0 120 #define CATPT_SSPSP_DEFAULT 0x0 121 #define CATPT_SSTSA_DEFAULT 0x0 122 #define CATPT_SSRSA_DEFAULT 0x0 123 #define CATPT_SSTSS_DEFAULT 0x0 124 #define CATPT_SSCR2_DEFAULT 0x0 125 #define CATPT_SSPSP2_DEFAULT 0x0 126 127 /* Coredump register and its states */ 128 #define CATPT_DRAM_COREDUMP 0x1F4 129 #define CATPT_COREDUMP_REQUEST UINT_MAX 130 #define CATPT_COREDUMP_RELEASE 0 131 132 /* Physically the same block, access address differs between host and dsp */ 133 #define CATPT_DSP_DRAM_OFFSET 0x400000 134 #define catpt_to_host_offset(offset) ((offset) & ~(CATPT_DSP_DRAM_OFFSET)) 135 #define catpt_to_dsp_offset(offset) ((offset) | CATPT_DSP_DRAM_OFFSET) 136 137 #define CATPT_MEMBLOCK_SIZE 0x8000 138 #define catpt_num_dram(cdev) (hweight_long((cdev)->spec->dram_mask)) 139 #define catpt_num_iram(cdev) (hweight_long((cdev)->spec->iram_mask)) 140 #define catpt_dram_size(cdev) (catpt_num_dram(cdev) * CATPT_MEMBLOCK_SIZE) 141 #define catpt_iram_size(cdev) (catpt_num_iram(cdev) * CATPT_MEMBLOCK_SIZE) 142 143 /* registry I/O helpers */ 144 145 #define catpt_dram_addr(cdev) \ 146 ((cdev)->lpe_ba + (cdev)->spec->host_dram_offset) 147 #define catpt_iram_addr(cdev) \ 148 ((cdev)->lpe_ba + (cdev)->spec->host_iram_offset) 149 #define catpt_shim_addr(cdev) \ 150 ((cdev)->lpe_ba + (cdev)->spec->host_shim_offset) 151 #define catpt_dma_addr(cdev, dma) \ 152 ((cdev)->lpe_ba + (cdev)->spec->host_dma_offset[dma]) 153 #define catpt_ssp_addr(cdev, ssp) \ 154 ((cdev)->lpe_ba + (cdev)->spec->host_ssp_offset[ssp]) 155 #define catpt_inbox_addr(cdev) \ 156 ((cdev)->lpe_ba + (cdev)->ipc.config.inbox_offset) 157 #define catpt_outbox_addr(cdev) \ 158 ((cdev)->lpe_ba + (cdev)->ipc.config.outbox_offset) 159 160 #define catpt_writel_ssp(cdev, ssp, reg, val) \ 161 writel(val, catpt_ssp_addr(cdev, ssp) + (reg)) 162 163 #define catpt_readl_dram(cdev, reg) \ 164 readl(catpt_dram_addr(cdev) + CATPT_DRAM_##reg) 165 #define catpt_writel_dram(cdev, reg, val) \ 166 writel(val, catpt_dram_addr(cdev) + CATPT_DRAM_##reg) 167 168 #define catpt_readl_shim(cdev, reg) \ 169 readl(catpt_shim_addr(cdev) + CATPT_SHIM_##reg) 170 #define catpt_writel_shim(cdev, reg, val) \ 171 writel(val, catpt_shim_addr(cdev) + CATPT_SHIM_##reg) 172 #define catpt_updatel_shim(cdev, reg, mask, val) \ 173 catpt_writel_shim(cdev, reg, \ 174 (catpt_readl_shim(cdev, reg) & ~(mask)) | (val)) 175 176 #define catpt_readl_poll_shim(cdev, reg, val, cond, delay_us, timeout_us) \ 177 readl_poll_timeout(catpt_shim_addr(cdev) + CATPT_SHIM_##reg, \ 178 val, cond, delay_us, timeout_us) 179 180 #define catpt_readl_pci(cdev, reg) \ 181 readl(cdev->pci_ba + CATPT_PCI_##reg) 182 #define catpt_writel_pci(cdev, reg, val) \ 183 writel(val, cdev->pci_ba + CATPT_PCI_##reg) 184 #define catpt_updatel_pci(cdev, reg, mask, val) \ 185 catpt_writel_pci(cdev, reg, \ 186 (catpt_readl_pci(cdev, reg) & ~(mask)) | (val)) 187 188 #define catpt_readl_poll_pci(cdev, reg, val, cond, delay_us, timeout_us) \ 189 readl_poll_timeout((cdev)->pci_ba + CATPT_PCI_##reg, \ 190 val, cond, delay_us, timeout_us) 191 192 #endif 193