1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 1999 - 2018 Intel Corporation. */
3
4 #include <linux/netdevice.h>
5 #include <linux/module.h>
6 #include <linux/pci.h>
7
8 #include "e1000.h"
9
10 /* This is the only thing that needs to be changed to adjust the
11 * maximum number of ports that the driver can manage.
12 */
13 #define E1000_MAX_NIC 32
14
15 #define OPTION_UNSET -1
16 #define OPTION_DISABLED 0
17 #define OPTION_ENABLED 1
18
19 #define COPYBREAK_DEFAULT 256
20 unsigned int copybreak = COPYBREAK_DEFAULT;
21 module_param(copybreak, uint, 0644);
22 MODULE_PARM_DESC(copybreak,
23 "Maximum size of packet that is copied to a new buffer on receive");
24
25 /* All parameters are treated the same, as an integer array of values.
26 * This macro just reduces the need to repeat the same declaration code
27 * over and over (plus this helps to avoid typo bugs).
28 */
29 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
30 #define E1000_PARAM(X, desc) \
31 static int X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
32 static unsigned int num_##X; \
33 module_param_array_named(X, X, int, &num_##X, 0); \
34 MODULE_PARM_DESC(X, desc);
35
36 /* Transmit Interrupt Delay in units of 1.024 microseconds
37 * Tx interrupt delay needs to typically be set to something non-zero
38 *
39 * Valid Range: 0-65535
40 */
41 E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
42 #define DEFAULT_TIDV 8
43 #define MAX_TXDELAY 0xFFFF
44 #define MIN_TXDELAY 0
45
46 /* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
47 *
48 * Valid Range: 0-65535
49 */
50 E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
51 #define DEFAULT_TADV 32
52 #define MAX_TXABSDELAY 0xFFFF
53 #define MIN_TXABSDELAY 0
54
55 /* Receive Interrupt Delay in units of 1.024 microseconds
56 * hardware will likely hang if you set this to anything but zero.
57 *
58 * Burst variant is used as default if device has FLAG2_DMA_BURST.
59 *
60 * Valid Range: 0-65535
61 */
62 E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
63 #define DEFAULT_RDTR 0
64 #define BURST_RDTR 0x20
65 #define MAX_RXDELAY 0xFFFF
66 #define MIN_RXDELAY 0
67
68 /* Receive Absolute Interrupt Delay in units of 1.024 microseconds
69 *
70 * Burst variant is used as default if device has FLAG2_DMA_BURST.
71 *
72 * Valid Range: 0-65535
73 */
74 E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
75 #define DEFAULT_RADV 8
76 #define BURST_RADV 0x20
77 #define MAX_RXABSDELAY 0xFFFF
78 #define MIN_RXABSDELAY 0
79
80 /* Interrupt Throttle Rate (interrupts/sec)
81 *
82 * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative
83 */
84 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
85 #define DEFAULT_ITR 3
86 #define MAX_ITR 100000
87 #define MIN_ITR 100
88
89 /* IntMode (Interrupt Mode)
90 *
91 * Valid Range: varies depending on kernel configuration & hardware support
92 *
93 * legacy=0, MSI=1, MSI-X=2
94 *
95 * When MSI/MSI-X support is enabled in kernel-
96 * Default Value: 2 (MSI-X) when supported by hardware, 1 (MSI) otherwise
97 * When MSI/MSI-X support is not enabled in kernel-
98 * Default Value: 0 (legacy)
99 *
100 * When a mode is specified that is not allowed/supported, it will be
101 * demoted to the most advanced interrupt mode available.
102 */
103 E1000_PARAM(IntMode, "Interrupt Mode");
104
105 /* Enable Smart Power Down of the PHY
106 *
107 * Valid Range: 0, 1
108 *
109 * Default Value: 0 (disabled)
110 */
111 E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
112
113 /* Enable Kumeran Lock Loss workaround
114 *
115 * Valid Range: 0, 1
116 *
117 * Default Value: 1 (enabled)
118 */
119 E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
120
121 /* Write Protect NVM
122 *
123 * Valid Range: 0, 1
124 *
125 * Default Value: 1 (enabled)
126 */
127 E1000_PARAM(WriteProtectNVM,
128 "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
129
130 /* Enable CRC Stripping
131 *
132 * Valid Range: 0, 1
133 *
134 * Default Value: 1 (enabled)
135 */
136 E1000_PARAM(CrcStripping,
137 "Enable CRC Stripping, disable if your BMC needs the CRC");
138
139 struct e1000_option {
140 enum { enable_option, range_option, list_option } type;
141 const char *name;
142 const char *err;
143 int def;
144 union {
145 /* range_option info */
146 struct {
147 int min;
148 int max;
149 } r;
150 /* list_option info */
151 struct {
152 int nr;
153 struct e1000_opt_list {
154 int i;
155 char *str;
156 } *p;
157 } l;
158 } arg;
159 };
160
e1000_validate_option(unsigned int * value,const struct e1000_option * opt,struct e1000_adapter * adapter)161 static int e1000_validate_option(unsigned int *value,
162 const struct e1000_option *opt,
163 struct e1000_adapter *adapter)
164 {
165 if (*value == OPTION_UNSET) {
166 *value = opt->def;
167 return 0;
168 }
169
170 switch (opt->type) {
171 case enable_option:
172 switch (*value) {
173 case OPTION_ENABLED:
174 dev_info(&adapter->pdev->dev, "%s Enabled\n",
175 opt->name);
176 return 0;
177 case OPTION_DISABLED:
178 dev_info(&adapter->pdev->dev, "%s Disabled\n",
179 opt->name);
180 return 0;
181 }
182 break;
183 case range_option:
184 if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
185 dev_info(&adapter->pdev->dev, "%s set to %i\n",
186 opt->name, *value);
187 return 0;
188 }
189 break;
190 case list_option: {
191 int i;
192 struct e1000_opt_list *ent;
193
194 for (i = 0; i < opt->arg.l.nr; i++) {
195 ent = &opt->arg.l.p[i];
196 if (*value == ent->i) {
197 if (ent->str[0] != '\0')
198 dev_info(&adapter->pdev->dev, "%s\n",
199 ent->str);
200 return 0;
201 }
202 }
203 }
204 break;
205 default:
206 BUG();
207 }
208
209 dev_info(&adapter->pdev->dev, "Invalid %s value specified (%i) %s\n",
210 opt->name, *value, opt->err);
211 *value = opt->def;
212 return -1;
213 }
214
215 /**
216 * e1000e_check_options - Range Checking for Command Line Parameters
217 * @adapter: board private structure
218 *
219 * This routine checks all command line parameters for valid user
220 * input. If an invalid value is given, or if no user specified
221 * value exists, a default value is used. The final value is stored
222 * in a variable in the adapter structure.
223 **/
e1000e_check_options(struct e1000_adapter * adapter)224 void e1000e_check_options(struct e1000_adapter *adapter)
225 {
226 struct e1000_hw *hw = &adapter->hw;
227 int bd = adapter->bd_number;
228
229 if (bd >= E1000_MAX_NIC) {
230 dev_notice(&adapter->pdev->dev,
231 "Warning: no configuration for board #%i\n", bd);
232 dev_notice(&adapter->pdev->dev,
233 "Using defaults for all values\n");
234 }
235
236 /* Transmit Interrupt Delay */
237 {
238 static const struct e1000_option opt = {
239 .type = range_option,
240 .name = "Transmit Interrupt Delay",
241 .err = "using default of "
242 __MODULE_STRING(DEFAULT_TIDV),
243 .def = DEFAULT_TIDV,
244 .arg = { .r = { .min = MIN_TXDELAY,
245 .max = MAX_TXDELAY } }
246 };
247
248 if (num_TxIntDelay > bd) {
249 adapter->tx_int_delay = TxIntDelay[bd];
250 e1000_validate_option(&adapter->tx_int_delay, &opt,
251 adapter);
252 } else {
253 adapter->tx_int_delay = opt.def;
254 }
255 }
256 /* Transmit Absolute Interrupt Delay */
257 {
258 static const struct e1000_option opt = {
259 .type = range_option,
260 .name = "Transmit Absolute Interrupt Delay",
261 .err = "using default of "
262 __MODULE_STRING(DEFAULT_TADV),
263 .def = DEFAULT_TADV,
264 .arg = { .r = { .min = MIN_TXABSDELAY,
265 .max = MAX_TXABSDELAY } }
266 };
267
268 if (num_TxAbsIntDelay > bd) {
269 adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
270 e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
271 adapter);
272 } else {
273 adapter->tx_abs_int_delay = opt.def;
274 }
275 }
276 /* Receive Interrupt Delay */
277 {
278 static struct e1000_option opt = {
279 .type = range_option,
280 .name = "Receive Interrupt Delay",
281 .err = "using default of "
282 __MODULE_STRING(DEFAULT_RDTR),
283 .def = DEFAULT_RDTR,
284 .arg = { .r = { .min = MIN_RXDELAY,
285 .max = MAX_RXDELAY } }
286 };
287
288 if (adapter->flags2 & FLAG2_DMA_BURST)
289 opt.def = BURST_RDTR;
290
291 if (num_RxIntDelay > bd) {
292 adapter->rx_int_delay = RxIntDelay[bd];
293 e1000_validate_option(&adapter->rx_int_delay, &opt,
294 adapter);
295 } else {
296 adapter->rx_int_delay = opt.def;
297 }
298 }
299 /* Receive Absolute Interrupt Delay */
300 {
301 static struct e1000_option opt = {
302 .type = range_option,
303 .name = "Receive Absolute Interrupt Delay",
304 .err = "using default of "
305 __MODULE_STRING(DEFAULT_RADV),
306 .def = DEFAULT_RADV,
307 .arg = { .r = { .min = MIN_RXABSDELAY,
308 .max = MAX_RXABSDELAY } }
309 };
310
311 if (adapter->flags2 & FLAG2_DMA_BURST)
312 opt.def = BURST_RADV;
313
314 if (num_RxAbsIntDelay > bd) {
315 adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
316 e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
317 adapter);
318 } else {
319 adapter->rx_abs_int_delay = opt.def;
320 }
321 }
322 /* Interrupt Throttling Rate */
323 {
324 static const struct e1000_option opt = {
325 .type = range_option,
326 .name = "Interrupt Throttling Rate (ints/sec)",
327 .err = "using default of "
328 __MODULE_STRING(DEFAULT_ITR),
329 .def = DEFAULT_ITR,
330 .arg = { .r = { .min = MIN_ITR,
331 .max = MAX_ITR } }
332 };
333
334 if (num_InterruptThrottleRate > bd) {
335 adapter->itr = InterruptThrottleRate[bd];
336
337 /* Make sure a message is printed for non-special
338 * values. And in case of an invalid option, display
339 * warning, use default and go through itr/itr_setting
340 * adjustment logic below
341 */
342 if ((adapter->itr > 4) &&
343 e1000_validate_option(&adapter->itr, &opt, adapter))
344 adapter->itr = opt.def;
345 } else {
346 /* If no option specified, use default value and go
347 * through the logic below to adjust itr/itr_setting
348 */
349 adapter->itr = opt.def;
350
351 /* Make sure a message is printed for non-special
352 * default values
353 */
354 if (adapter->itr > 4)
355 dev_info(&adapter->pdev->dev,
356 "%s set to default %d\n", opt.name,
357 adapter->itr);
358 }
359
360 adapter->itr_setting = adapter->itr;
361 switch (adapter->itr) {
362 case 0:
363 dev_info(&adapter->pdev->dev, "%s turned off\n",
364 opt.name);
365 break;
366 case 1:
367 dev_info(&adapter->pdev->dev,
368 "%s set to dynamic mode\n", opt.name);
369 adapter->itr = 20000;
370 break;
371 case 2:
372 dev_info(&adapter->pdev->dev,
373 "%s Invalid mode - setting default\n",
374 opt.name);
375 adapter->itr_setting = opt.def;
376 fallthrough;
377 case 3:
378 dev_info(&adapter->pdev->dev,
379 "%s set to dynamic conservative mode\n",
380 opt.name);
381 adapter->itr = 20000;
382 break;
383 case 4:
384 dev_info(&adapter->pdev->dev,
385 "%s set to simplified (2000-8000 ints) mode\n",
386 opt.name);
387 break;
388 default:
389 /* Save the setting, because the dynamic bits
390 * change itr.
391 *
392 * Clear the lower two bits because
393 * they are used as control.
394 */
395 adapter->itr_setting &= ~3;
396 break;
397 }
398 }
399 /* Interrupt Mode */
400 {
401 static struct e1000_option opt = {
402 .type = range_option,
403 .name = "Interrupt Mode",
404 #ifndef CONFIG_PCI_MSI
405 .err = "defaulting to 0 (legacy)",
406 .def = E1000E_INT_MODE_LEGACY,
407 .arg = { .r = { .min = 0,
408 .max = 0 } }
409 #endif
410 };
411
412 #ifdef CONFIG_PCI_MSI
413 if (adapter->flags & FLAG_HAS_MSIX) {
414 opt.err = kstrdup("defaulting to 2 (MSI-X)",
415 GFP_KERNEL);
416 opt.def = E1000E_INT_MODE_MSIX;
417 opt.arg.r.max = E1000E_INT_MODE_MSIX;
418 } else {
419 opt.err = kstrdup("defaulting to 1 (MSI)", GFP_KERNEL);
420 opt.def = E1000E_INT_MODE_MSI;
421 opt.arg.r.max = E1000E_INT_MODE_MSI;
422 }
423
424 if (!opt.err) {
425 dev_err(&adapter->pdev->dev,
426 "Failed to allocate memory\n");
427 return;
428 }
429 #endif
430
431 if (num_IntMode > bd) {
432 unsigned int int_mode = IntMode[bd];
433
434 e1000_validate_option(&int_mode, &opt, adapter);
435 adapter->int_mode = int_mode;
436 } else {
437 adapter->int_mode = opt.def;
438 }
439
440 #ifdef CONFIG_PCI_MSI
441 kfree(opt.err);
442 #endif
443 }
444 /* Smart Power Down */
445 {
446 static const struct e1000_option opt = {
447 .type = enable_option,
448 .name = "PHY Smart Power Down",
449 .err = "defaulting to Disabled",
450 .def = OPTION_DISABLED
451 };
452
453 if (num_SmartPowerDownEnable > bd) {
454 unsigned int spd = SmartPowerDownEnable[bd];
455
456 e1000_validate_option(&spd, &opt, adapter);
457 if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) && spd)
458 adapter->flags |= FLAG_SMART_POWER_DOWN;
459 }
460 }
461 /* CRC Stripping */
462 {
463 static const struct e1000_option opt = {
464 .type = enable_option,
465 .name = "CRC Stripping",
466 .err = "defaulting to Enabled",
467 .def = OPTION_ENABLED
468 };
469
470 if (num_CrcStripping > bd) {
471 unsigned int crc_stripping = CrcStripping[bd];
472
473 e1000_validate_option(&crc_stripping, &opt, adapter);
474 if (crc_stripping == OPTION_ENABLED) {
475 adapter->flags2 |= FLAG2_CRC_STRIPPING;
476 adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
477 }
478 } else {
479 adapter->flags2 |= FLAG2_CRC_STRIPPING;
480 adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
481 }
482 }
483 /* Kumeran Lock Loss Workaround */
484 {
485 static const struct e1000_option opt = {
486 .type = enable_option,
487 .name = "Kumeran Lock Loss Workaround",
488 .err = "defaulting to Enabled",
489 .def = OPTION_ENABLED
490 };
491 bool enabled = opt.def;
492
493 if (num_KumeranLockLoss > bd) {
494 unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
495
496 e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
497 enabled = kmrn_lock_loss;
498 }
499
500 if (hw->mac.type == e1000_ich8lan)
501 e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
502 enabled);
503 }
504 /* Write-protect NVM */
505 {
506 static const struct e1000_option opt = {
507 .type = enable_option,
508 .name = "Write-protect NVM",
509 .err = "defaulting to Enabled",
510 .def = OPTION_ENABLED
511 };
512
513 if (adapter->flags & FLAG_IS_ICH) {
514 if (num_WriteProtectNVM > bd) {
515 unsigned int write_protect_nvm =
516 WriteProtectNVM[bd];
517 e1000_validate_option(&write_protect_nvm, &opt,
518 adapter);
519 if (write_protect_nvm)
520 adapter->flags |= FLAG_READ_ONLY_NVM;
521 } else {
522 if (opt.def)
523 adapter->flags |= FLAG_READ_ONLY_NVM;
524 }
525 }
526 }
527 }
528