1 /* 2 * Copyright (c) 2010 Broadcom Corporation 3 * 4 * Permission to use, copy, modify, and/or distribute this software for any 5 * purpose with or without fee is hereby granted, provided that the above 6 * copyright notice and this permission notice appear in all copies. 7 * 8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY 11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION 13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 15 */ 16 17 #ifndef _BRCM_TYPES_H_ 18 #define _BRCM_TYPES_H_ 19 20 #include <linux/types.h> 21 #include <linux/io.h> 22 23 #define WL_CHAN_FREQ_RANGE_2G 0 24 #define WL_CHAN_FREQ_RANGE_5GL 1 25 #define WL_CHAN_FREQ_RANGE_5GM 2 26 #define WL_CHAN_FREQ_RANGE_5GH 3 27 28 /* boardflags */ 29 30 /* Board has gpio 9 controlling the PA */ 31 #define BFL_PACTRL 0x00000002 32 /* Not ok to power down the chip pll and oscillator */ 33 #define BFL_NOPLLDOWN 0x00000020 34 /* Board supports the Front End Module */ 35 #define BFL_FEM 0x00000800 36 /* Board has an external LNA in 2.4GHz band */ 37 #define BFL_EXTLNA 0x00001000 38 /* Board has no PA */ 39 #define BFL_NOPA 0x00010000 40 /* Power topology uses BUCKBOOST */ 41 #define BFL_BUCKBOOST 0x00200000 42 /* Board has FEM and switch to share antenna w/ BT */ 43 #define BFL_FEM_BT 0x00400000 44 /* Power topology doesn't use CBUCK */ 45 #define BFL_NOCBUCK 0x00800000 46 /* Power topology uses PALDO */ 47 #define BFL_PALDO 0x02000000 48 /* Board has an external LNA in 5GHz band */ 49 #define BFL_EXTLNA_5GHz 0x10000000 50 51 /* boardflags2 */ 52 53 /* Board has an external rxbb regulator */ 54 #define BFL2_RXBB_INT_REG_DIS 0x00000001 55 /* Flag to implement alternative A-band PLL settings */ 56 #define BFL2_APLL_WAR 0x00000002 57 /* Board permits enabling TX Power Control */ 58 #define BFL2_TXPWRCTRL_EN 0x00000004 59 /* Board supports the 2X4 diversity switch */ 60 #define BFL2_2X4_DIV 0x00000008 61 /* Board supports 5G band power gain */ 62 #define BFL2_5G_PWRGAIN 0x00000010 63 /* Board overrides ASPM and Clkreq settings */ 64 #define BFL2_PCIEWAR_OVR 0x00000020 65 #define BFL2_LEGACY 0x00000080 66 /* 4321mcm93 board uses Skyworks FEM */ 67 #define BFL2_SKWRKFEM_BRD 0x00000100 68 /* Board has a WAR for clock-harmonic spurs */ 69 #define BFL2_SPUR_WAR 0x00000200 70 /* Flag to narrow G-band PLL loop b/w */ 71 #define BFL2_GPLL_WAR 0x00000400 72 /* Tx CCK pkts on Ant 0 only */ 73 #define BFL2_SINGLEANT_CCK 0x00001000 74 /* WAR to reduce and avoid clock-harmonic spurs in 2G */ 75 #define BFL2_2G_SPUR_WAR 0x00002000 76 /* Flag to widen G-band PLL loop b/w */ 77 #define BFL2_GPLL_WAR2 0x00010000 78 #define BFL2_IPALVLSHIFT_3P3 0x00020000 79 /* Use internal envelope detector for TX IQCAL */ 80 #define BFL2_INTERNDET_TXIQCAL 0x00040000 81 /* Keep the buffered Xtal output from radio "ON". Most drivers will turn it 82 * off without this flag to save power. */ 83 #define BFL2_XTALBUFOUTEN 0x00080000 84 85 /* 86 * board specific GPIO assignment, gpio 0-3 are also customer-configurable 87 * led 88 */ 89 90 /* bit 9 controls the PA on new 4306 boards */ 91 #define BOARD_GPIO_PACTRL 0x200 92 #define BOARD_GPIO_12 0x1000 93 #define BOARD_GPIO_13 0x2000 94 95 /* **** Core type/rev defaults **** */ 96 #define D11CONF 0x0fffffb0 /* Supported D11 revs: 4, 5, 7-27 97 * also need to update wlc.h MAXCOREREV 98 */ 99 100 #define NCONF 0x000001ff /* Supported nphy revs: 101 * 0 4321a0 102 * 1 4321a1 103 * 2 4321b0/b1/c0/c1 104 * 3 4322a0 105 * 4 4322a1 106 * 5 4716a0 107 * 6 43222a0, 43224a0 108 * 7 43226a0 109 * 8 5357a0, 43236a0 110 */ 111 112 #define LCNCONF 0x00000007 /* Supported lcnphy revs: 113 * 0 4313a0, 4336a0, 4330a0 114 * 1 115 * 2 4330a0 116 */ 117 118 #define SSLPNCONF 0x0000000f /* Supported sslpnphy revs: 119 * 0 4329a0/k0 120 * 1 4329b0/4329C0 121 * 2 4319a0 122 * 3 5356a0 123 */ 124 125 /******************************************************************** 126 * Phy/Core Configuration. Defines macros to check core phy/rev * 127 * compile-time configuration. Defines default core support. * 128 * ****************************************************************** 129 */ 130 131 /* Basic macros to check a configuration bitmask */ 132 133 #define CONF_HAS(config, val) ((config) & (1 << (val))) 134 #define CONF_MSK(config, mask) ((config) & (mask)) 135 #define MSK_RANGE(low, hi) ((1 << ((hi)+1)) - (1 << (low))) 136 #define CONF_RANGE(config, low, hi) (CONF_MSK(config, MSK_RANGE(low, high))) 137 138 #define CONF_IS(config, val) ((config) == (1 << (val))) 139 #define CONF_GE(config, val) ((config) & (0-(1 << (val)))) 140 #define CONF_GT(config, val) ((config) & (0-2*(1 << (val)))) 141 #define CONF_LT(config, val) ((config) & ((1 << (val))-1)) 142 #define CONF_LE(config, val) ((config) & (2*(1 << (val))-1)) 143 144 /* Wrappers for some of the above, specific to config constants */ 145 146 #define NCONF_HAS(val) CONF_HAS(NCONF, val) 147 #define NCONF_MSK(mask) CONF_MSK(NCONF, mask) 148 #define NCONF_IS(val) CONF_IS(NCONF, val) 149 #define NCONF_GE(val) CONF_GE(NCONF, val) 150 #define NCONF_GT(val) CONF_GT(NCONF, val) 151 #define NCONF_LT(val) CONF_LT(NCONF, val) 152 #define NCONF_LE(val) CONF_LE(NCONF, val) 153 154 #define LCNCONF_HAS(val) CONF_HAS(LCNCONF, val) 155 #define LCNCONF_MSK(mask) CONF_MSK(LCNCONF, mask) 156 #define LCNCONF_IS(val) CONF_IS(LCNCONF, val) 157 #define LCNCONF_GE(val) CONF_GE(LCNCONF, val) 158 #define LCNCONF_GT(val) CONF_GT(LCNCONF, val) 159 #define LCNCONF_LT(val) CONF_LT(LCNCONF, val) 160 #define LCNCONF_LE(val) CONF_LE(LCNCONF, val) 161 162 #define D11CONF_HAS(val) CONF_HAS(D11CONF, val) 163 #define D11CONF_MSK(mask) CONF_MSK(D11CONF, mask) 164 #define D11CONF_IS(val) CONF_IS(D11CONF, val) 165 #define D11CONF_GE(val) CONF_GE(D11CONF, val) 166 #define D11CONF_GT(val) CONF_GT(D11CONF, val) 167 #define D11CONF_LT(val) CONF_LT(D11CONF, val) 168 #define D11CONF_LE(val) CONF_LE(D11CONF, val) 169 170 #define PHYCONF_HAS(val) CONF_HAS(PHYTYPE, val) 171 #define PHYCONF_IS(val) CONF_IS(PHYTYPE, val) 172 173 #define NREV_IS(var, val) \ 174 (NCONF_HAS(val) && (NCONF_IS(val) || ((var) == (val)))) 175 176 #define NREV_GE(var, val) \ 177 (NCONF_GE(val) && (!NCONF_LT(val) || ((var) >= (val)))) 178 179 #define NREV_GT(var, val) \ 180 (NCONF_GT(val) && (!NCONF_LE(val) || ((var) > (val)))) 181 182 #define NREV_LT(var, val) \ 183 (NCONF_LT(val) && (!NCONF_GE(val) || ((var) < (val)))) 184 185 #define NREV_LE(var, val) \ 186 (NCONF_LE(val) && (!NCONF_GT(val) || ((var) <= (val)))) 187 188 #define LCNREV_IS(var, val) \ 189 (LCNCONF_HAS(val) && (LCNCONF_IS(val) || ((var) == (val)))) 190 191 #define LCNREV_GE(var, val) \ 192 (LCNCONF_GE(val) && (!LCNCONF_LT(val) || ((var) >= (val)))) 193 194 #define LCNREV_GT(var, val) \ 195 (LCNCONF_GT(val) && (!LCNCONF_LE(val) || ((var) > (val)))) 196 197 #define LCNREV_LT(var, val) \ 198 (LCNCONF_LT(val) && (!LCNCONF_GE(val) || ((var) < (val)))) 199 200 #define LCNREV_LE(var, val) \ 201 (LCNCONF_LE(val) && (!LCNCONF_GT(val) || ((var) <= (val)))) 202 203 #define D11REV_IS(var, val) \ 204 (D11CONF_HAS(val) && (D11CONF_IS(val) || ((var) == (val)))) 205 206 #define D11REV_GE(var, val) \ 207 (D11CONF_GE(val) && (!D11CONF_LT(val) || ((var) >= (val)))) 208 209 #define D11REV_GT(var, val) \ 210 (D11CONF_GT(val) && (!D11CONF_LE(val) || ((var) > (val)))) 211 212 #define D11REV_LT(var, val) \ 213 (D11CONF_LT(val) && (!D11CONF_GE(val) || ((var) < (val)))) 214 215 #define D11REV_LE(var, val) \ 216 (D11CONF_LE(val) && (!D11CONF_GT(val) || ((var) <= (val)))) 217 218 #define PHYTYPE_IS(var, val)\ 219 (PHYCONF_HAS(val) && (PHYCONF_IS(val) || ((var) == (val)))) 220 221 /* Set up PHYTYPE automatically: (depends on PHY_TYPE_X, from d11.h) */ 222 223 #define _PHYCONF_N (1 << PHY_TYPE_N) 224 #define _PHYCONF_LCN (1 << PHY_TYPE_LCN) 225 #define _PHYCONF_SSLPN (1 << PHY_TYPE_SSN) 226 227 #define PHYTYPE (_PHYCONF_N | _PHYCONF_LCN | _PHYCONF_SSLPN) 228 229 /* Utility macro to identify 802.11n (HT) capable PHYs */ 230 #define PHYTYPE_11N_CAP(phytype) \ 231 (PHYTYPE_IS(phytype, PHY_TYPE_N) || \ 232 PHYTYPE_IS(phytype, PHY_TYPE_LCN) || \ 233 PHYTYPE_IS(phytype, PHY_TYPE_SSN)) 234 235 /* Last but not least: shorter wlc-specific var checks */ 236 #define BRCMS_ISNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_N) 237 #define BRCMS_ISLCNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_LCN) 238 #define BRCMS_ISSSLPNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_SSN) 239 240 #define BRCMS_PHY_11N_CAP(band) PHYTYPE_11N_CAP((band)->phytype) 241 242 /********************************************************************** 243 * ------------- End of Core phy/rev configuration. ----------------- * 244 * ******************************************************************** 245 */ 246 247 #define BCMMSG(dev, fmt, args...) \ 248 do { \ 249 if (brcm_msg_level & BRCM_DL_INFO) \ 250 wiphy_err(dev, "%s: " fmt, __func__, ##args); \ 251 } while (0) 252 253 #ifdef CONFIG_BCM47XX 254 /* 255 * bcm4716 (which includes 4717 & 4718), plus 4706 on PCIe can reorder 256 * transactions. As a fix, a read after write is performed on certain places 257 * in the code. Older chips and the newer 5357 family don't require this fix. 258 */ 259 #define bcma_wflush16(c, o, v) \ 260 ({ bcma_write16(c, o, v); (void)bcma_read16(c, o); }) 261 #else 262 #define bcma_wflush16(c, o, v) bcma_write16(c, o, v) 263 #endif /* CONFIG_BCM47XX */ 264 265 /* multi-bool data type: set of bools, mbool is true if any is set */ 266 267 /* set one bool */ 268 #define mboolset(mb, bit) ((mb) |= (bit)) 269 /* clear one bool */ 270 #define mboolclr(mb, bit) ((mb) &= ~(bit)) 271 /* true if one bool is set */ 272 #define mboolisset(mb, bit) (((mb) & (bit)) != 0) 273 #define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val))) 274 275 #define CEIL(x, y) (((x) + ((y)-1)) / (y)) 276 277 /* forward declarations */ 278 struct wiphy; 279 struct ieee80211_sta; 280 struct ieee80211_tx_queue_params; 281 struct brcms_info; 282 struct brcms_c_info; 283 struct brcms_hardware; 284 struct brcms_band; 285 struct dma_pub; 286 struct si_pub; 287 struct tx_status; 288 struct d11rxhdr; 289 struct txpwr_limits; 290 291 /* brcm_msg_level is a bit vector with defs in defs.h */ 292 extern u32 brcm_msg_level; 293 294 #endif /* _BRCM_TYPES_H_ */ 295