1 // SPDX-License-Identifier: 0BSD
2
3 /*
4 * Branch/Call/Jump (BCJ) filter decoders
5 *
6 * Authors: Lasse Collin <lasse.collin@tukaani.org>
7 * Igor Pavlov <https://7-zip.org/>
8 */
9
10 #include "xz_private.h"
11
12 /*
13 * The rest of the file is inside this ifdef. It makes things a little more
14 * convenient when building without support for any BCJ filters.
15 */
16 #ifdef XZ_DEC_BCJ
17
18 struct xz_dec_bcj {
19 /* Type of the BCJ filter being used */
20 enum {
21 BCJ_X86 = 4, /* x86 or x86-64 */
22 BCJ_POWERPC = 5, /* Big endian only */
23 BCJ_IA64 = 6, /* Big or little endian */
24 BCJ_ARM = 7, /* Little endian only */
25 BCJ_ARMTHUMB = 8, /* Little endian only */
26 BCJ_SPARC = 9, /* Big or little endian */
27 BCJ_ARM64 = 10, /* AArch64 */
28 BCJ_RISCV = 11 /* RV32GQC_Zfh, RV64GQC_Zfh */
29 } type;
30
31 /*
32 * Return value of the next filter in the chain. We need to preserve
33 * this information across calls, because we must not call the next
34 * filter anymore once it has returned XZ_STREAM_END.
35 */
36 enum xz_ret ret;
37
38 /* True if we are operating in single-call mode. */
39 bool single_call;
40
41 /*
42 * Absolute position relative to the beginning of the uncompressed
43 * data (in a single .xz Block). We care only about the lowest 32
44 * bits so this doesn't need to be uint64_t even with big files.
45 */
46 uint32_t pos;
47
48 /* x86 filter state */
49 uint32_t x86_prev_mask;
50
51 /* Temporary space to hold the variables from struct xz_buf */
52 uint8_t *out;
53 size_t out_pos;
54 size_t out_size;
55
56 struct {
57 /* Amount of already filtered data in the beginning of buf */
58 size_t filtered;
59
60 /* Total amount of data currently stored in buf */
61 size_t size;
62
63 /*
64 * Buffer to hold a mix of filtered and unfiltered data. This
65 * needs to be big enough to hold Alignment + 2 * Look-ahead:
66 *
67 * Type Alignment Look-ahead
68 * x86 1 4
69 * PowerPC 4 0
70 * IA-64 16 0
71 * ARM 4 0
72 * ARM-Thumb 2 2
73 * SPARC 4 0
74 */
75 uint8_t buf[16];
76 } temp;
77 };
78
79 #ifdef XZ_DEC_X86
80 /*
81 * This is used to test the most significant byte of a memory address
82 * in an x86 instruction.
83 */
bcj_x86_test_msbyte(uint8_t b)84 static inline int bcj_x86_test_msbyte(uint8_t b)
85 {
86 return b == 0x00 || b == 0xFF;
87 }
88
bcj_x86(struct xz_dec_bcj * s,uint8_t * buf,size_t size)89 static size_t bcj_x86(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
90 {
91 static const bool mask_to_allowed_status[8]
92 = { true, true, true, false, true, false, false, false };
93
94 static const uint8_t mask_to_bit_num[8] = { 0, 1, 2, 2, 3, 3, 3, 3 };
95
96 size_t i;
97 size_t prev_pos = (size_t)-1;
98 uint32_t prev_mask = s->x86_prev_mask;
99 uint32_t src;
100 uint32_t dest;
101 uint32_t j;
102 uint8_t b;
103
104 if (size <= 4)
105 return 0;
106
107 size -= 4;
108 for (i = 0; i < size; ++i) {
109 if ((buf[i] & 0xFE) != 0xE8)
110 continue;
111
112 prev_pos = i - prev_pos;
113 if (prev_pos > 3) {
114 prev_mask = 0;
115 } else {
116 prev_mask = (prev_mask << (prev_pos - 1)) & 7;
117 if (prev_mask != 0) {
118 b = buf[i + 4 - mask_to_bit_num[prev_mask]];
119 if (!mask_to_allowed_status[prev_mask]
120 || bcj_x86_test_msbyte(b)) {
121 prev_pos = i;
122 prev_mask = (prev_mask << 1) | 1;
123 continue;
124 }
125 }
126 }
127
128 prev_pos = i;
129
130 if (bcj_x86_test_msbyte(buf[i + 4])) {
131 src = get_unaligned_le32(buf + i + 1);
132 while (true) {
133 dest = src - (s->pos + (uint32_t)i + 5);
134 if (prev_mask == 0)
135 break;
136
137 j = mask_to_bit_num[prev_mask] * 8;
138 b = (uint8_t)(dest >> (24 - j));
139 if (!bcj_x86_test_msbyte(b))
140 break;
141
142 src = dest ^ (((uint32_t)1 << (32 - j)) - 1);
143 }
144
145 dest &= 0x01FFFFFF;
146 dest |= (uint32_t)0 - (dest & 0x01000000);
147 put_unaligned_le32(dest, buf + i + 1);
148 i += 4;
149 } else {
150 prev_mask = (prev_mask << 1) | 1;
151 }
152 }
153
154 prev_pos = i - prev_pos;
155 s->x86_prev_mask = prev_pos > 3 ? 0 : prev_mask << (prev_pos - 1);
156 return i;
157 }
158 #endif
159
160 #ifdef XZ_DEC_POWERPC
bcj_powerpc(struct xz_dec_bcj * s,uint8_t * buf,size_t size)161 static size_t bcj_powerpc(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
162 {
163 size_t i;
164 uint32_t instr;
165
166 size &= ~(size_t)3;
167
168 for (i = 0; i < size; i += 4) {
169 instr = get_unaligned_be32(buf + i);
170 if ((instr & 0xFC000003) == 0x48000001) {
171 instr &= 0x03FFFFFC;
172 instr -= s->pos + (uint32_t)i;
173 instr &= 0x03FFFFFC;
174 instr |= 0x48000001;
175 put_unaligned_be32(instr, buf + i);
176 }
177 }
178
179 return i;
180 }
181 #endif
182
183 #ifdef XZ_DEC_IA64
bcj_ia64(struct xz_dec_bcj * s,uint8_t * buf,size_t size)184 static size_t bcj_ia64(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
185 {
186 static const uint8_t branch_table[32] = {
187 0, 0, 0, 0, 0, 0, 0, 0,
188 0, 0, 0, 0, 0, 0, 0, 0,
189 4, 4, 6, 6, 0, 0, 7, 7,
190 4, 4, 0, 0, 4, 4, 0, 0
191 };
192
193 /*
194 * The local variables take a little bit stack space, but it's less
195 * than what LZMA2 decoder takes, so it doesn't make sense to reduce
196 * stack usage here without doing that for the LZMA2 decoder too.
197 */
198
199 /* Loop counters */
200 size_t i;
201 size_t j;
202
203 /* Instruction slot (0, 1, or 2) in the 128-bit instruction word */
204 uint32_t slot;
205
206 /* Bitwise offset of the instruction indicated by slot */
207 uint32_t bit_pos;
208
209 /* bit_pos split into byte and bit parts */
210 uint32_t byte_pos;
211 uint32_t bit_res;
212
213 /* Address part of an instruction */
214 uint32_t addr;
215
216 /* Mask used to detect which instructions to convert */
217 uint32_t mask;
218
219 /* 41-bit instruction stored somewhere in the lowest 48 bits */
220 uint64_t instr;
221
222 /* Instruction normalized with bit_res for easier manipulation */
223 uint64_t norm;
224
225 size &= ~(size_t)15;
226
227 for (i = 0; i < size; i += 16) {
228 mask = branch_table[buf[i] & 0x1F];
229 for (slot = 0, bit_pos = 5; slot < 3; ++slot, bit_pos += 41) {
230 if (((mask >> slot) & 1) == 0)
231 continue;
232
233 byte_pos = bit_pos >> 3;
234 bit_res = bit_pos & 7;
235 instr = 0;
236 for (j = 0; j < 6; ++j)
237 instr |= (uint64_t)(buf[i + j + byte_pos])
238 << (8 * j);
239
240 norm = instr >> bit_res;
241
242 if (((norm >> 37) & 0x0F) == 0x05
243 && ((norm >> 9) & 0x07) == 0) {
244 addr = (norm >> 13) & 0x0FFFFF;
245 addr |= ((uint32_t)(norm >> 36) & 1) << 20;
246 addr <<= 4;
247 addr -= s->pos + (uint32_t)i;
248 addr >>= 4;
249
250 norm &= ~((uint64_t)0x8FFFFF << 13);
251 norm |= (uint64_t)(addr & 0x0FFFFF) << 13;
252 norm |= (uint64_t)(addr & 0x100000)
253 << (36 - 20);
254
255 instr &= (1 << bit_res) - 1;
256 instr |= norm << bit_res;
257
258 for (j = 0; j < 6; j++)
259 buf[i + j + byte_pos]
260 = (uint8_t)(instr >> (8 * j));
261 }
262 }
263 }
264
265 return i;
266 }
267 #endif
268
269 #ifdef XZ_DEC_ARM
bcj_arm(struct xz_dec_bcj * s,uint8_t * buf,size_t size)270 static size_t bcj_arm(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
271 {
272 size_t i;
273 uint32_t addr;
274
275 size &= ~(size_t)3;
276
277 for (i = 0; i < size; i += 4) {
278 if (buf[i + 3] == 0xEB) {
279 addr = (uint32_t)buf[i] | ((uint32_t)buf[i + 1] << 8)
280 | ((uint32_t)buf[i + 2] << 16);
281 addr <<= 2;
282 addr -= s->pos + (uint32_t)i + 8;
283 addr >>= 2;
284 buf[i] = (uint8_t)addr;
285 buf[i + 1] = (uint8_t)(addr >> 8);
286 buf[i + 2] = (uint8_t)(addr >> 16);
287 }
288 }
289
290 return i;
291 }
292 #endif
293
294 #ifdef XZ_DEC_ARMTHUMB
bcj_armthumb(struct xz_dec_bcj * s,uint8_t * buf,size_t size)295 static size_t bcj_armthumb(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
296 {
297 size_t i;
298 uint32_t addr;
299
300 if (size < 4)
301 return 0;
302
303 size -= 4;
304
305 for (i = 0; i <= size; i += 2) {
306 if ((buf[i + 1] & 0xF8) == 0xF0
307 && (buf[i + 3] & 0xF8) == 0xF8) {
308 addr = (((uint32_t)buf[i + 1] & 0x07) << 19)
309 | ((uint32_t)buf[i] << 11)
310 | (((uint32_t)buf[i + 3] & 0x07) << 8)
311 | (uint32_t)buf[i + 2];
312 addr <<= 1;
313 addr -= s->pos + (uint32_t)i + 4;
314 addr >>= 1;
315 buf[i + 1] = (uint8_t)(0xF0 | ((addr >> 19) & 0x07));
316 buf[i] = (uint8_t)(addr >> 11);
317 buf[i + 3] = (uint8_t)(0xF8 | ((addr >> 8) & 0x07));
318 buf[i + 2] = (uint8_t)addr;
319 i += 2;
320 }
321 }
322
323 return i;
324 }
325 #endif
326
327 #ifdef XZ_DEC_SPARC
bcj_sparc(struct xz_dec_bcj * s,uint8_t * buf,size_t size)328 static size_t bcj_sparc(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
329 {
330 size_t i;
331 uint32_t instr;
332
333 size &= ~(size_t)3;
334
335 for (i = 0; i < size; i += 4) {
336 instr = get_unaligned_be32(buf + i);
337 if ((instr >> 22) == 0x100 || (instr >> 22) == 0x1FF) {
338 instr <<= 2;
339 instr -= s->pos + (uint32_t)i;
340 instr >>= 2;
341 instr = ((uint32_t)0x40000000 - (instr & 0x400000))
342 | 0x40000000 | (instr & 0x3FFFFF);
343 put_unaligned_be32(instr, buf + i);
344 }
345 }
346
347 return i;
348 }
349 #endif
350
351 #ifdef XZ_DEC_ARM64
bcj_arm64(struct xz_dec_bcj * s,uint8_t * buf,size_t size)352 static size_t bcj_arm64(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
353 {
354 size_t i;
355 uint32_t instr;
356 uint32_t addr;
357
358 size &= ~(size_t)3;
359
360 for (i = 0; i < size; i += 4) {
361 instr = get_unaligned_le32(buf + i);
362
363 if ((instr >> 26) == 0x25) {
364 /* BL instruction */
365 addr = instr - ((s->pos + (uint32_t)i) >> 2);
366 instr = 0x94000000 | (addr & 0x03FFFFFF);
367 put_unaligned_le32(instr, buf + i);
368
369 } else if ((instr & 0x9F000000) == 0x90000000) {
370 /* ADRP instruction */
371 addr = ((instr >> 29) & 3) | ((instr >> 3) & 0x1FFFFC);
372
373 /* Only convert values in the range +/-512 MiB. */
374 if ((addr + 0x020000) & 0x1C0000)
375 continue;
376
377 addr -= (s->pos + (uint32_t)i) >> 12;
378
379 instr &= 0x9000001F;
380 instr |= (addr & 3) << 29;
381 instr |= (addr & 0x03FFFC) << 3;
382 instr |= (0U - (addr & 0x020000)) & 0xE00000;
383
384 put_unaligned_le32(instr, buf + i);
385 }
386 }
387
388 return i;
389 }
390 #endif
391
392 #ifdef XZ_DEC_RISCV
bcj_riscv(struct xz_dec_bcj * s,uint8_t * buf,size_t size)393 static size_t bcj_riscv(struct xz_dec_bcj *s, uint8_t *buf, size_t size)
394 {
395 size_t i;
396 uint32_t b1;
397 uint32_t b2;
398 uint32_t b3;
399 uint32_t instr;
400 uint32_t instr2;
401 uint32_t instr2_rs1;
402 uint32_t addr;
403
404 if (size < 8)
405 return 0;
406
407 size -= 8;
408
409 for (i = 0; i <= size; i += 2) {
410 instr = buf[i];
411
412 if (instr == 0xEF) {
413 /* JAL */
414 b1 = buf[i + 1];
415 if ((b1 & 0x0D) != 0)
416 continue;
417
418 b2 = buf[i + 2];
419 b3 = buf[i + 3];
420
421 addr = ((b1 & 0xF0) << 13) | (b2 << 9) | (b3 << 1);
422 addr -= s->pos + (uint32_t)i;
423
424 buf[i + 1] = (uint8_t)((b1 & 0x0F)
425 | ((addr >> 8) & 0xF0));
426
427 buf[i + 2] = (uint8_t)(((addr >> 16) & 0x0F)
428 | ((addr >> 7) & 0x10)
429 | ((addr << 4) & 0xE0));
430
431 buf[i + 3] = (uint8_t)(((addr >> 4) & 0x7F)
432 | ((addr >> 13) & 0x80));
433
434 i += 4 - 2;
435
436 } else if ((instr & 0x7F) == 0x17) {
437 /* AUIPC */
438 instr |= (uint32_t)buf[i + 1] << 8;
439 instr |= (uint32_t)buf[i + 2] << 16;
440 instr |= (uint32_t)buf[i + 3] << 24;
441
442 if (instr & 0xE80) {
443 /* AUIPC's rd doesn't equal x0 or x2. */
444 instr2 = get_unaligned_le32(buf + i + 4);
445
446 if (((instr << 8) ^ (instr2 - 3)) & 0xF8003) {
447 i += 6 - 2;
448 continue;
449 }
450
451 addr = (instr & 0xFFFFF000) + (instr2 >> 20);
452
453 instr = 0x17 | (2 << 7) | (instr2 << 12);
454 instr2 = addr;
455 } else {
456 /* AUIPC's rd equals x0 or x2. */
457 instr2_rs1 = instr >> 27;
458
459 if ((uint32_t)((instr - 0x3117) << 18)
460 >= (instr2_rs1 & 0x1D)) {
461 i += 4 - 2;
462 continue;
463 }
464
465 addr = get_unaligned_be32(buf + i + 4);
466 addr -= s->pos + (uint32_t)i;
467
468 instr2 = (instr >> 12) | (addr << 20);
469
470 instr = 0x17 | (instr2_rs1 << 7)
471 | ((addr + 0x800) & 0xFFFFF000);
472 }
473
474 put_unaligned_le32(instr, buf + i);
475 put_unaligned_le32(instr2, buf + i + 4);
476
477 i += 8 - 2;
478 }
479 }
480
481 return i;
482 }
483 #endif
484
485 /*
486 * Apply the selected BCJ filter. Update *pos and s->pos to match the amount
487 * of data that got filtered.
488 *
489 * NOTE: This is implemented as a switch statement to avoid using function
490 * pointers, which could be problematic in the kernel boot code, which must
491 * avoid pointers to static data (at least on x86).
492 */
bcj_apply(struct xz_dec_bcj * s,uint8_t * buf,size_t * pos,size_t size)493 static void bcj_apply(struct xz_dec_bcj *s,
494 uint8_t *buf, size_t *pos, size_t size)
495 {
496 size_t filtered;
497
498 buf += *pos;
499 size -= *pos;
500
501 switch (s->type) {
502 #ifdef XZ_DEC_X86
503 case BCJ_X86:
504 filtered = bcj_x86(s, buf, size);
505 break;
506 #endif
507 #ifdef XZ_DEC_POWERPC
508 case BCJ_POWERPC:
509 filtered = bcj_powerpc(s, buf, size);
510 break;
511 #endif
512 #ifdef XZ_DEC_IA64
513 case BCJ_IA64:
514 filtered = bcj_ia64(s, buf, size);
515 break;
516 #endif
517 #ifdef XZ_DEC_ARM
518 case BCJ_ARM:
519 filtered = bcj_arm(s, buf, size);
520 break;
521 #endif
522 #ifdef XZ_DEC_ARMTHUMB
523 case BCJ_ARMTHUMB:
524 filtered = bcj_armthumb(s, buf, size);
525 break;
526 #endif
527 #ifdef XZ_DEC_SPARC
528 case BCJ_SPARC:
529 filtered = bcj_sparc(s, buf, size);
530 break;
531 #endif
532 #ifdef XZ_DEC_ARM64
533 case BCJ_ARM64:
534 filtered = bcj_arm64(s, buf, size);
535 break;
536 #endif
537 #ifdef XZ_DEC_RISCV
538 case BCJ_RISCV:
539 filtered = bcj_riscv(s, buf, size);
540 break;
541 #endif
542 default:
543 /* Never reached but silence compiler warnings. */
544 filtered = 0;
545 break;
546 }
547
548 *pos += filtered;
549 s->pos += filtered;
550 }
551
552 /*
553 * Flush pending filtered data from temp to the output buffer.
554 * Move the remaining mixture of possibly filtered and unfiltered
555 * data to the beginning of temp.
556 */
bcj_flush(struct xz_dec_bcj * s,struct xz_buf * b)557 static void bcj_flush(struct xz_dec_bcj *s, struct xz_buf *b)
558 {
559 size_t copy_size;
560
561 copy_size = min_t(size_t, s->temp.filtered, b->out_size - b->out_pos);
562 memcpy(b->out + b->out_pos, s->temp.buf, copy_size);
563 b->out_pos += copy_size;
564
565 s->temp.filtered -= copy_size;
566 s->temp.size -= copy_size;
567 memmove(s->temp.buf, s->temp.buf + copy_size, s->temp.size);
568 }
569
570 /*
571 * The BCJ filter functions are primitive in sense that they process the
572 * data in chunks of 1-16 bytes. To hide this issue, this function does
573 * some buffering.
574 */
xz_dec_bcj_run(struct xz_dec_bcj * s,struct xz_dec_lzma2 * lzma2,struct xz_buf * b)575 enum xz_ret xz_dec_bcj_run(struct xz_dec_bcj *s, struct xz_dec_lzma2 *lzma2,
576 struct xz_buf *b)
577 {
578 size_t out_start;
579
580 /*
581 * Flush pending already filtered data to the output buffer. Return
582 * immediately if we couldn't flush everything, or if the next
583 * filter in the chain had already returned XZ_STREAM_END.
584 */
585 if (s->temp.filtered > 0) {
586 bcj_flush(s, b);
587 if (s->temp.filtered > 0)
588 return XZ_OK;
589
590 if (s->ret == XZ_STREAM_END)
591 return XZ_STREAM_END;
592 }
593
594 /*
595 * If we have more output space than what is currently pending in
596 * temp, copy the unfiltered data from temp to the output buffer
597 * and try to fill the output buffer by decoding more data from the
598 * next filter in the chain. Apply the BCJ filter on the new data
599 * in the output buffer. If everything cannot be filtered, copy it
600 * to temp and rewind the output buffer position accordingly.
601 *
602 * This needs to be always run when temp.size == 0 to handle a special
603 * case where the output buffer is full and the next filter has no
604 * more output coming but hasn't returned XZ_STREAM_END yet.
605 */
606 if (s->temp.size < b->out_size - b->out_pos || s->temp.size == 0) {
607 out_start = b->out_pos;
608 memcpy(b->out + b->out_pos, s->temp.buf, s->temp.size);
609 b->out_pos += s->temp.size;
610
611 s->ret = xz_dec_lzma2_run(lzma2, b);
612 if (s->ret != XZ_STREAM_END
613 && (s->ret != XZ_OK || s->single_call))
614 return s->ret;
615
616 bcj_apply(s, b->out, &out_start, b->out_pos);
617
618 /*
619 * As an exception, if the next filter returned XZ_STREAM_END,
620 * we can do that too, since the last few bytes that remain
621 * unfiltered are meant to remain unfiltered.
622 */
623 if (s->ret == XZ_STREAM_END)
624 return XZ_STREAM_END;
625
626 s->temp.size = b->out_pos - out_start;
627 b->out_pos -= s->temp.size;
628 memcpy(s->temp.buf, b->out + b->out_pos, s->temp.size);
629
630 /*
631 * If there wasn't enough input to the next filter to fill
632 * the output buffer with unfiltered data, there's no point
633 * to try decoding more data to temp.
634 */
635 if (b->out_pos + s->temp.size < b->out_size)
636 return XZ_OK;
637 }
638
639 /*
640 * We have unfiltered data in temp. If the output buffer isn't full
641 * yet, try to fill the temp buffer by decoding more data from the
642 * next filter. Apply the BCJ filter on temp. Then we hopefully can
643 * fill the actual output buffer by copying filtered data from temp.
644 * A mix of filtered and unfiltered data may be left in temp; it will
645 * be taken care on the next call to this function.
646 */
647 if (b->out_pos < b->out_size) {
648 /* Make b->out{,_pos,_size} temporarily point to s->temp. */
649 s->out = b->out;
650 s->out_pos = b->out_pos;
651 s->out_size = b->out_size;
652 b->out = s->temp.buf;
653 b->out_pos = s->temp.size;
654 b->out_size = sizeof(s->temp.buf);
655
656 s->ret = xz_dec_lzma2_run(lzma2, b);
657
658 s->temp.size = b->out_pos;
659 b->out = s->out;
660 b->out_pos = s->out_pos;
661 b->out_size = s->out_size;
662
663 if (s->ret != XZ_OK && s->ret != XZ_STREAM_END)
664 return s->ret;
665
666 bcj_apply(s, s->temp.buf, &s->temp.filtered, s->temp.size);
667
668 /*
669 * If the next filter returned XZ_STREAM_END, we mark that
670 * everything is filtered, since the last unfiltered bytes
671 * of the stream are meant to be left as is.
672 */
673 if (s->ret == XZ_STREAM_END)
674 s->temp.filtered = s->temp.size;
675
676 bcj_flush(s, b);
677 if (s->temp.filtered > 0)
678 return XZ_OK;
679 }
680
681 return s->ret;
682 }
683
xz_dec_bcj_create(bool single_call)684 struct xz_dec_bcj *xz_dec_bcj_create(bool single_call)
685 {
686 struct xz_dec_bcj *s = kmalloc(sizeof(*s), GFP_KERNEL);
687 if (s != NULL)
688 s->single_call = single_call;
689
690 return s;
691 }
692
xz_dec_bcj_reset(struct xz_dec_bcj * s,uint8_t id)693 enum xz_ret xz_dec_bcj_reset(struct xz_dec_bcj *s, uint8_t id)
694 {
695 switch (id) {
696 #ifdef XZ_DEC_X86
697 case BCJ_X86:
698 #endif
699 #ifdef XZ_DEC_POWERPC
700 case BCJ_POWERPC:
701 #endif
702 #ifdef XZ_DEC_IA64
703 case BCJ_IA64:
704 #endif
705 #ifdef XZ_DEC_ARM
706 case BCJ_ARM:
707 #endif
708 #ifdef XZ_DEC_ARMTHUMB
709 case BCJ_ARMTHUMB:
710 #endif
711 #ifdef XZ_DEC_SPARC
712 case BCJ_SPARC:
713 #endif
714 #ifdef XZ_DEC_ARM64
715 case BCJ_ARM64:
716 #endif
717 #ifdef XZ_DEC_RISCV
718 case BCJ_RISCV:
719 #endif
720 break;
721
722 default:
723 /* Unsupported Filter ID */
724 return XZ_OPTIONS_ERROR;
725 }
726
727 s->type = id;
728 s->ret = XZ_OK;
729 s->pos = 0;
730 s->x86_prev_mask = 0;
731 s->temp.filtered = 0;
732 s->temp.size = 0;
733
734 return XZ_OK;
735 }
736
737 #endif
738