1 /*
2 * Copyright (c) 2005-2008 Chelsio, Inc. All rights reserved.
3 *
4 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
9 *
10 * Redistribution and use in source and binary forms, with or
11 * without modification, are permitted provided that the following
12 * conditions are met:
13 *
14 * - Redistributions of source code must retain the above
15 * copyright notice, this list of conditions and the following
16 * disclaimer.
17 *
18 * - Redistributions in binary form must reproduce the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer in the documentation and/or other materials
21 * provided with the distribution.
22 *
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30 * SOFTWARE.
31 */
32
33 #include "common.h"
34 #include "regs.h"
35
36 enum {
37 /* MDIO_DEV_PMA_PMD registers */
38 AQ_LINK_STAT = 0xe800,
39 AQ_IMASK_PMA = 0xf000,
40
41 /* MDIO_DEV_XGXS registers */
42 AQ_XAUI_RX_CFG = 0xc400,
43 AQ_XAUI_TX_CFG = 0xe400,
44
45 /* MDIO_DEV_ANEG registers */
46 AQ_1G_CTRL = 0xc400,
47 AQ_ANEG_STAT = 0xc800,
48
49 /* MDIO_DEV_VEND1 registers */
50 AQ_FW_VERSION = 0x0020,
51 AQ_IFLAG_GLOBAL = 0xfc00,
52 AQ_IMASK_GLOBAL = 0xff00,
53 };
54
55 enum {
56 IMASK_PMA = 1 << 2,
57 IMASK_GLOBAL = 1 << 15,
58 ADV_1G_FULL = 1 << 15,
59 ADV_1G_HALF = 1 << 14,
60 ADV_10G_FULL = 1 << 12,
61 AQ_RESET = (1 << 14) | (1 << 15),
62 AQ_LOWPOWER = 1 << 12,
63 };
64
aq100x_reset(struct cphy * phy,int wait)65 static int aq100x_reset(struct cphy *phy, int wait)
66 {
67 /*
68 * Ignore the caller specified wait time; always wait for the reset to
69 * complete. Can take up to 3s.
70 */
71 int err = t3_phy_reset(phy, MDIO_MMD_VEND1, 3000);
72
73 if (err)
74 CH_WARN(phy->adapter, "PHY%d: reset failed (0x%x).\n",
75 phy->mdio.prtad, err);
76
77 return err;
78 }
79
aq100x_intr_enable(struct cphy * phy)80 static int aq100x_intr_enable(struct cphy *phy)
81 {
82 int err = t3_mdio_write(phy, MDIO_MMD_PMAPMD, AQ_IMASK_PMA, IMASK_PMA);
83 if (err)
84 return err;
85
86 err = t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, IMASK_GLOBAL);
87 return err;
88 }
89
aq100x_intr_disable(struct cphy * phy)90 static int aq100x_intr_disable(struct cphy *phy)
91 {
92 return t3_mdio_write(phy, MDIO_MMD_VEND1, AQ_IMASK_GLOBAL, 0);
93 }
94
aq100x_intr_clear(struct cphy * phy)95 static int aq100x_intr_clear(struct cphy *phy)
96 {
97 unsigned int v;
98
99 t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_IFLAG_GLOBAL, &v);
100 t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &v);
101
102 return 0;
103 }
104
aq100x_intr_handler(struct cphy * phy)105 static int aq100x_intr_handler(struct cphy *phy)
106 {
107 int err;
108 unsigned int cause, v;
109
110 err = t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_IFLAG_GLOBAL, &cause);
111 if (err)
112 return err;
113
114 /* Read (and reset) the latching version of the status */
115 t3_mdio_read(phy, MDIO_MMD_PMAPMD, MDIO_STAT1, &v);
116
117 return cphy_cause_link_change;
118 }
119
aq100x_power_down(struct cphy * phy,int off)120 static int aq100x_power_down(struct cphy *phy, int off)
121 {
122 return mdio_set_flag(&phy->mdio, phy->mdio.prtad,
123 MDIO_MMD_PMAPMD, MDIO_CTRL1,
124 MDIO_CTRL1_LPOWER, off);
125 }
126
aq100x_autoneg_enable(struct cphy * phy)127 static int aq100x_autoneg_enable(struct cphy *phy)
128 {
129 int err;
130
131 err = aq100x_power_down(phy, 0);
132 if (!err)
133 err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
134 MDIO_MMD_AN, MDIO_CTRL1,
135 BMCR_ANENABLE | BMCR_ANRESTART, 1);
136
137 return err;
138 }
139
aq100x_autoneg_restart(struct cphy * phy)140 static int aq100x_autoneg_restart(struct cphy *phy)
141 {
142 int err;
143
144 err = aq100x_power_down(phy, 0);
145 if (!err)
146 err = mdio_set_flag(&phy->mdio, phy->mdio.prtad,
147 MDIO_MMD_AN, MDIO_CTRL1,
148 BMCR_ANENABLE | BMCR_ANRESTART, 1);
149
150 return err;
151 }
152
aq100x_advertise(struct cphy * phy,unsigned int advertise_map)153 static int aq100x_advertise(struct cphy *phy, unsigned int advertise_map)
154 {
155 unsigned int adv;
156 int err;
157
158 /* 10G advertisement */
159 adv = 0;
160 if (advertise_map & ADVERTISED_10000baseT_Full)
161 adv |= ADV_10G_FULL;
162 err = t3_mdio_change_bits(phy, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
163 ADV_10G_FULL, adv);
164 if (err)
165 return err;
166
167 /* 1G advertisement */
168 adv = 0;
169 if (advertise_map & ADVERTISED_1000baseT_Full)
170 adv |= ADV_1G_FULL;
171 if (advertise_map & ADVERTISED_1000baseT_Half)
172 adv |= ADV_1G_HALF;
173 err = t3_mdio_change_bits(phy, MDIO_MMD_AN, AQ_1G_CTRL,
174 ADV_1G_FULL | ADV_1G_HALF, adv);
175 if (err)
176 return err;
177
178 /* 100M, pause advertisement */
179 adv = 0;
180 if (advertise_map & ADVERTISED_100baseT_Half)
181 adv |= ADVERTISE_100HALF;
182 if (advertise_map & ADVERTISED_100baseT_Full)
183 adv |= ADVERTISE_100FULL;
184 if (advertise_map & ADVERTISED_Pause)
185 adv |= ADVERTISE_PAUSE_CAP;
186 if (advertise_map & ADVERTISED_Asym_Pause)
187 adv |= ADVERTISE_PAUSE_ASYM;
188 err = t3_mdio_change_bits(phy, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
189 0xfe0, adv);
190
191 return err;
192 }
193
aq100x_set_loopback(struct cphy * phy,int mmd,int dir,int enable)194 static int aq100x_set_loopback(struct cphy *phy, int mmd, int dir, int enable)
195 {
196 return mdio_set_flag(&phy->mdio, phy->mdio.prtad,
197 MDIO_MMD_PMAPMD, MDIO_CTRL1,
198 BMCR_LOOPBACK, enable);
199 }
200
aq100x_set_speed_duplex(struct cphy * phy,int speed,int duplex)201 static int aq100x_set_speed_duplex(struct cphy *phy, int speed, int duplex)
202 {
203 /* no can do */
204 return -1;
205 }
206
aq100x_get_link_status(struct cphy * phy,int * link_ok,int * speed,int * duplex,int * fc)207 static int aq100x_get_link_status(struct cphy *phy, int *link_ok,
208 int *speed, int *duplex, int *fc)
209 {
210 int err;
211 unsigned int v;
212
213 if (link_ok) {
214 err = t3_mdio_read(phy, MDIO_MMD_PMAPMD, AQ_LINK_STAT, &v);
215 if (err)
216 return err;
217
218 *link_ok = v & 1;
219 if (!*link_ok)
220 return 0;
221 }
222
223 err = t3_mdio_read(phy, MDIO_MMD_AN, AQ_ANEG_STAT, &v);
224 if (err)
225 return err;
226
227 if (speed) {
228 switch (v & 0x6) {
229 case 0x6:
230 *speed = SPEED_10000;
231 break;
232 case 0x4:
233 *speed = SPEED_1000;
234 break;
235 case 0x2:
236 *speed = SPEED_100;
237 break;
238 case 0x0:
239 *speed = SPEED_10;
240 break;
241 }
242 }
243
244 if (duplex)
245 *duplex = v & 1 ? DUPLEX_FULL : DUPLEX_HALF;
246
247 return 0;
248 }
249
250 static const struct cphy_ops aq100x_ops = {
251 .reset = aq100x_reset,
252 .intr_enable = aq100x_intr_enable,
253 .intr_disable = aq100x_intr_disable,
254 .intr_clear = aq100x_intr_clear,
255 .intr_handler = aq100x_intr_handler,
256 .autoneg_enable = aq100x_autoneg_enable,
257 .autoneg_restart = aq100x_autoneg_restart,
258 .advertise = aq100x_advertise,
259 .set_loopback = aq100x_set_loopback,
260 .set_speed_duplex = aq100x_set_speed_duplex,
261 .get_link_status = aq100x_get_link_status,
262 .power_down = aq100x_power_down,
263 .mmds = MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS | MDIO_DEVS_PHYXS,
264 };
265
t3_aq100x_phy_prep(struct cphy * phy,struct adapter * adapter,int phy_addr,const struct mdio_ops * mdio_ops)266 int t3_aq100x_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
267 const struct mdio_ops *mdio_ops)
268 {
269 unsigned int v, v2, gpio, wait;
270 int err;
271
272 cphy_init(phy, adapter, phy_addr, &aq100x_ops, mdio_ops,
273 SUPPORTED_1000baseT_Full | SUPPORTED_10000baseT_Full |
274 SUPPORTED_TP | SUPPORTED_Autoneg | SUPPORTED_AUI,
275 "1000/10GBASE-T");
276
277 /*
278 * The PHY has been out of reset ever since the system powered up. So
279 * we do a hard reset over here.
280 */
281 gpio = phy_addr ? F_GPIO10_OUT_VAL : F_GPIO6_OUT_VAL;
282 t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, 0);
283 msleep(1);
284 t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, gpio, gpio);
285
286 /*
287 * Give it enough time to load the firmware and get ready for mdio.
288 */
289 msleep(1000);
290 wait = 500; /* in 10ms increments */
291 do {
292 err = t3_mdio_read(phy, MDIO_MMD_VEND1, MDIO_CTRL1, &v);
293 if (err || v == 0xffff) {
294
295 /* Allow prep_adapter to succeed when ffff is read */
296
297 CH_WARN(adapter, "PHY%d: reset failed (0x%x, 0x%x).\n",
298 phy_addr, err, v);
299 goto done;
300 }
301
302 v &= AQ_RESET;
303 if (v)
304 msleep(10);
305 } while (v && --wait);
306 if (v) {
307 CH_WARN(adapter, "PHY%d: reset timed out (0x%x).\n",
308 phy_addr, v);
309
310 goto done; /* let prep_adapter succeed */
311 }
312
313 /* Datasheet says 3s max but this has been observed */
314 wait = (500 - wait) * 10 + 1000;
315 if (wait > 3000)
316 CH_WARN(adapter, "PHY%d: reset took %ums\n", phy_addr, wait);
317
318 /* Firmware version check. */
319 t3_mdio_read(phy, MDIO_MMD_VEND1, AQ_FW_VERSION, &v);
320 if (v != 101)
321 CH_WARN(adapter, "PHY%d: unsupported firmware %d\n",
322 phy_addr, v);
323
324 /*
325 * The PHY should start in really-low-power mode. Prepare it for normal
326 * operations.
327 */
328 err = t3_mdio_read(phy, MDIO_MMD_VEND1, MDIO_CTRL1, &v);
329 if (err)
330 return err;
331 if (v & AQ_LOWPOWER) {
332 err = t3_mdio_change_bits(phy, MDIO_MMD_VEND1, MDIO_CTRL1,
333 AQ_LOWPOWER, 0);
334 if (err)
335 return err;
336 msleep(10);
337 } else
338 CH_WARN(adapter, "PHY%d does not start in low power mode.\n",
339 phy_addr);
340
341 /*
342 * Verify XAUI settings, but let prep succeed no matter what.
343 */
344 v = v2 = 0;
345 t3_mdio_read(phy, MDIO_MMD_PHYXS, AQ_XAUI_RX_CFG, &v);
346 t3_mdio_read(phy, MDIO_MMD_PHYXS, AQ_XAUI_TX_CFG, &v2);
347 if (v != 0x1b || v2 != 0x1b)
348 CH_WARN(adapter,
349 "PHY%d: incorrect XAUI settings (0x%x, 0x%x).\n",
350 phy_addr, v, v2);
351
352 done:
353 return err;
354 }
355